Multiplication of decimals
•Download as PPTX, PDF•
2 likes•9,730 views
This document discusses multiplying decimals. It provides 3 examples of multiplying decimals and has the reader try 2 practice problems. The steps for multiplying decimals are explained: 1) align the decimals on the right, 2) multiply starting from the right decimal place moving left, and 3) align the decimal point straight in the answer. The document concludes with questions and group work to solidify understanding of multiplying decimals.
Report
Share
Report
Share
Recommended
Synthetic division
This document provides instructions for using synthetic division to divide polynomials. It contains the following key points:
1. Synthetic division can be used to divide polynomials when the divisor has a leading coefficient of 1 and there is a coefficient for every power of the variable in the numerator.
2. The procedure involves writing the terms of the numerator in descending order, bringing down the constant of the divisor, multiplying and adding down the columns to obtain the coefficients of the quotient polynomial and the remainder.
3. An example problem walks through each step of synthetic division to divide (5x^4 - 4x^2 + x + 6) / (x - 3), obtaining a quotient of 5x^3 + 15
Exponential Notation Slides
The document discusses exponential notation and powers. It introduces exponential notation as a way to represent repeated multiplication more concisely using exponents. Examples show how to write numbers raised to powers using exponential notation and the use of parentheses with fractional or negative bases. A practice section reinforces understanding of exponential notation and when to use parentheses.
Fraction To Decimal
This document provides instructions for converting decimals to fractions and fractions to decimals. It explains that the place value of the last digit determines the denominator of the fraction. For decimals, the place value is determined by powers of ten. For fractions, the place value determines where the digit goes in the decimal. It also addresses situations where the denominator is not a power of ten, in which case the fraction needs to be divided.
Evaluating Algebraic Expressions
This document discusses expressions and equations. It defines an expression as not containing an equal sign, while equations do. There are two types of expressions: numerical expressions containing only numbers, and algebraic expressions containing numbers, symbols, and variables. A variable represents an unknown value and can be any letter. The document provides examples of evaluating algebraic expressions by substituting numbers for variables.
Multiplication and division of fractions
This document contains lesson materials on operations with fractions, including examples of addition, subtraction, multiplication, and division of fractions. It provides steps for solving each type of operation, such as multiplying the numerators and denominators for multiplication, or applying cross multiplication for division. It then includes practice problems for students to work through, covering adding and subtracting similar and dissimilar fractions, as well as multiplying and dividing fractions. The document aims to teach students the key steps and methods for performing different mathematical operations with fractions.
2-10 Adding and Subtracting Decimals
The document provides step-by-step instructions for adding and subtracting decimals. It explains how to line up the decimals properly, then add or subtract place values from right to left, regrouping when needed. Examples shown include adding 4.73 + 3.54 = 8.27 and subtracting 53.261 - 53.214 = 0.047. The steps emphasize placing decimals in the correct position in the final answer.
Division of Polynomials
This document discusses different methods for dividing polynomials:
1. Simple division - dividing a polynomial by a monomial by distributing the monomial factor.
2. Long division - the standard long division algorithm for dividing polynomials, where you repeatedly subtract multiples of the divisor polynomial from the dividend polynomial.
3. Synthetic division - a compact algorithm for dividing a polynomial by a polynomial where the leading coefficient of the divisor is 1, by writing the terms in descending order and performing operations on the coefficients.
Integer practice (multiply and divide) ppt
This document discusses integers and the rules for multiplying and dividing integers. It defines an integer as a positive or negative whole number including 0. It provides examples of integers ranging from -3 to 3. It then explains the rules for multiplying integers: the product of two integers with the same sign is positive, while the product of two integers with different signs is negative. These same rules apply to dividing integers. The document provides examples of multiplying and dividing integers to demonstrate applying the rules.
Recommended
Synthetic division
This document provides instructions for using synthetic division to divide polynomials. It contains the following key points:
1. Synthetic division can be used to divide polynomials when the divisor has a leading coefficient of 1 and there is a coefficient for every power of the variable in the numerator.
2. The procedure involves writing the terms of the numerator in descending order, bringing down the constant of the divisor, multiplying and adding down the columns to obtain the coefficients of the quotient polynomial and the remainder.
3. An example problem walks through each step of synthetic division to divide (5x^4 - 4x^2 + x + 6) / (x - 3), obtaining a quotient of 5x^3 + 15
Exponential Notation Slides
The document discusses exponential notation and powers. It introduces exponential notation as a way to represent repeated multiplication more concisely using exponents. Examples show how to write numbers raised to powers using exponential notation and the use of parentheses with fractional or negative bases. A practice section reinforces understanding of exponential notation and when to use parentheses.
Fraction To Decimal
This document provides instructions for converting decimals to fractions and fractions to decimals. It explains that the place value of the last digit determines the denominator of the fraction. For decimals, the place value is determined by powers of ten. For fractions, the place value determines where the digit goes in the decimal. It also addresses situations where the denominator is not a power of ten, in which case the fraction needs to be divided.
Evaluating Algebraic Expressions
This document discusses expressions and equations. It defines an expression as not containing an equal sign, while equations do. There are two types of expressions: numerical expressions containing only numbers, and algebraic expressions containing numbers, symbols, and variables. A variable represents an unknown value and can be any letter. The document provides examples of evaluating algebraic expressions by substituting numbers for variables.
Multiplication and division of fractions
This document contains lesson materials on operations with fractions, including examples of addition, subtraction, multiplication, and division of fractions. It provides steps for solving each type of operation, such as multiplying the numerators and denominators for multiplication, or applying cross multiplication for division. It then includes practice problems for students to work through, covering adding and subtracting similar and dissimilar fractions, as well as multiplying and dividing fractions. The document aims to teach students the key steps and methods for performing different mathematical operations with fractions.
2-10 Adding and Subtracting Decimals
The document provides step-by-step instructions for adding and subtracting decimals. It explains how to line up the decimals properly, then add or subtract place values from right to left, regrouping when needed. Examples shown include adding 4.73 + 3.54 = 8.27 and subtracting 53.261 - 53.214 = 0.047. The steps emphasize placing decimals in the correct position in the final answer.
Division of Polynomials
This document discusses different methods for dividing polynomials:
1. Simple division - dividing a polynomial by a monomial by distributing the monomial factor.
2. Long division - the standard long division algorithm for dividing polynomials, where you repeatedly subtract multiples of the divisor polynomial from the dividend polynomial.
3. Synthetic division - a compact algorithm for dividing a polynomial by a polynomial where the leading coefficient of the divisor is 1, by writing the terms in descending order and performing operations on the coefficients.
Integer practice (multiply and divide) ppt
This document discusses integers and the rules for multiplying and dividing integers. It defines an integer as a positive or negative whole number including 0. It provides examples of integers ranging from -3 to 3. It then explains the rules for multiplying integers: the product of two integers with the same sign is positive, while the product of two integers with different signs is negative. These same rules apply to dividing integers. The document provides examples of multiplying and dividing integers to demonstrate applying the rules.
Order Of Operations
The document discusses order of operations, which is the order in which mathematical operations should be performed in a problem containing multiple operations. The standard order is: 1) operations within parentheses, 2) exponents, 3) multiplication and division from left to right, 4) addition and subtraction from left to right. It provides examples of solving problems using the proper order of operations and asks readers to try solving sample problems on their own.
Presentation on inverse proportion
This document discusses direct and inverse proportions.
Direct proportion means that as one quantity increases, the other increases by the same ratio. They form a straight line graph passing through the origin.
Inverse proportion means that as one quantity increases, the other decreases. The quantities are inversely related by a constant factor. Their relationship forms a curved line graph.
Examples of direct and inverse proportions are provided along with their equation representations and graphs. Key features of these graphs are highlighted.
Converting fraction into decimals and vice versa(MAth 7)
This document provides instruction on converting fractions to decimals and vice versa. It begins with examples of writing fractions in simplest form. It then defines different types of decimals, such as terminating, repeating, non-terminating, and non-repeating decimals. Methods for manually converting fractions to decimals are presented, including multiplying the fraction to get a power of ten in the denominator. Examples are provided of writing fractions as decimals and decimals as fractions in simplest form. The document concludes with a lesson quiz as an assignment.
Order of Operations
The document discusses the order of operations in mathematics. It explains that the order of operations (PEMDAS) - Parentheses, Exponents, Multiplication, Division, Addition, Subtraction - provides rules for which operations to perform first in a mathematical expression without changing the result. It provides examples of evaluating expressions using the proper order of operations and also provides links to online games for practicing order of operations skills.
Adding and subtracting fractions
Adding and subtracting fractions involves making the bottom numbers the same by finding the lowest common multiple and multiplying the top numbers of each fraction by the same amount. Then the top numbers are either added or subtracted, while keeping the bottom number the same, to obtain the final fraction answer. The document provides steps for adding the fractions 3/4 and 1/3 as an example.
Multiplying polynomials
The document describes three methods for multiplying polynomials:
1) The distributive property, which involves multiplying each term of one polynomial with each term of the other.
2) FOIL (First, Outer, Inner, Last), which is a mnemonic for multiplying binomials by multiplying corresponding terms.
3) The box method, which involves drawing a box and writing one polynomial above and beside the box, then multiplying corresponding terms. Examples are provided to demonstrate each method.
Add and Subtract Decimals
This document provides instructions for adding and subtracting decimals. It explains that when adding or subtracting decimals, you should line up the decimal points and place values. Then you perform the calculation, carrying or borrowing values as needed just as you would with whole numbers. Examples are provided of adding decimals with sums of 5.78 + 4.46 and 4.39 + 8.72. Examples of subtracting decimals include 9.34 - 4.27 and 10.83 - 3.92. Practice problems are also included for the reader to try.
Operations with integers
Integers include all whole numbers and their opposites, and zero. The key rules for operations with integers are:
1) Adding integers of the same sign yields a positive sum, while those of opposite signs subtracts and uses the sign of the larger number.
2) Multiplying and dividing integers follows sign rules - same signs yield a positive result, different signs a negative one.
3) To subtract integers, change the operation to addition by changing the subtraction sign to addition and changing the sign of the number being subtracted.
Comparing And Ordering Decimals
1) The document discusses ordering decimals from least to greatest using place value and number lines. It provides examples of ordering prices from a McDonald's menu and test scores.
2) Equivalent decimals have the same value even if they have a different number of decimal places. Annexing zeros by adding trailing zeros does not change a decimal's value.
3) To order decimals from least to greatest, decimals are first lined up and zeros are annexed to give each number the same number of decimal places. Then the decimals are compared using place value starting from the left.
Decimals
The document discusses decimals and their relationship to fractions. It explains that decimals extend the place value system to include values less than one. The value of each place decreases by a factor of ten as you move to the right of the decimal point. Decimals can be added, subtracted, multiplied and divided using standard algorithms. Terminating decimals can be converted to fractions by writing the decimal as the numerator over an appropriate power of ten as the denominator. Repeating decimals can be converted to fractions by writing the repeating portion as the numerator over nines and zeros in the denominator.
Cartesian Coordinate Plane - Mathematics 8
This document explains the Cartesian coordinate plane. It describes how the plane is divided into four quadrants by the x and y axes which intersect at the origin. It provides examples of plotting points using ordered pairs with coordinates (x,y). The document also notes that Rene Descartes developed this system by combining algebra and geometry. It includes an activity for students to physically position themselves on the x and y axes to learn the coordinate system.
Add & Subtract Fractions
This document provides an overview of fractions including:
- Definitions of proper, improper, and mixed numbers
- Equivalent fractions and how to identify them
- Ordering fractions with both like and unlike denominators
- Adding and subtracting fractions with both like and unlike denominators
- Examples are provided for each concept along with practice problems for students to work through
The document covers essential fraction concepts and provides clear explanations, examples, and practice problems to help students understand fractions.
Dividing integers
The document discusses dividing integers and their rules:
- There are four rules for dividing integers based on the signs of the numbers: two positives or negatives give a positive, opposite signs give a negative.
- Examples are provided to demonstrate applying the rules.
- The mean, or average, of a data set is calculated by summing the values and dividing by the number of values.
- Order of operations must be followed when evaluating expressions.
Multiplying & dividing rational algebraic expressions
This document discusses how to multiply and divide rational algebraic expressions. It explains that to multiply rational expressions, one multiplies the numerators and denominators separately. Rational expressions must first be factored to cancel common factors before multiplying. Several examples of multiplying rational expressions are shown. The document also explains that to divide rational expressions, one multiplies the numerator by the reciprocal of the denominator. Some examples of dividing rational expressions are provided.
Direct proportion
This document discusses direct proportion and methods for solving direct proportion problems. Direct proportion exists when two quantities change at a constant rate with respect to each other. The cross-multiplication method can be used to solve direct proportion problems by setting up a proportion between the known quantities and cross-multiplying to solve for the unknown quantity. Graphs of direct proportion relationships will always produce a straight line passing through the origin.
Adding Integers Ppt
The document provides examples and instructions for adding and subtracting integers using a number chip method. It explains that to add integers with the same sign, the numbers are added together, while to add integers with different signs, the smaller number is subtracted from the larger number and the sign of the larger number determines the sign of the answer. For subtracting integers, the opposite of the number being subtracted is added instead. Several examples are worked through to demonstrate these methods.
Quadratic functions and their application
Quadratic functions have several real-life applications and can be used to model mathematical problems. To solve problems involving quadratic functions, identify given information, represent the problem as a function, and consider the maximum or minimum property to solve for the final answer. Examples provided demonstrate solving for unknown variables in quadratic equations derived from word problems about rectangles, consecutive numbers, and the dimensions of a tennis table.
Rectangular coordinate system
This document defines and explains the rectangular coordinate system. It begins by introducing Rene Descartes as the "Father of Modern Mathematics" who developed the Cartesian plane. The Cartesian plane is composed of two perpendicular number lines that intersect at the origin (0,0) and divide the plane into four quadrants. Each point on the plane is identified by an ordered pair (x,y) denoting its distance from the x-axis and y-axis. The sign of the x and y values determines which quadrant a point falls into. Examples are provided to identify points and their corresponding quadrants.
Strategies for solving math word problems
This document discusses several different methods for solving math word problems:
- The Toolbox Method allows students to choose from multiple strategies to find the one that works best for them.
- The CUBES Method is well-suited for visual learners as it has them dissect and analyze the word problem.
- The STEPS Method provides students with a sequential structure to follow when solving word problems.
- The Step by Step Method also provides a step-by-step process and works well for logical, sequential thinkers.
Ratio ppt
The document defines and provides examples of ratios. Key points:
- A ratio compares two quantities and expresses their relationship. Order matters in a ratio (e.g. 2 to 3 is not the same as 3 to 2).
- Ratios can be written in three equivalent forms: a:b, a to b, or as a fraction a/b.
- Equivalent ratios can be formed by simplifying ratios (reducing to lowest terms) or multiplying the original ratio by a number.
- Examples show calculating and writing ratios for various scenarios involving groups of objects.
Exam paper1
1. The document contains 40 multiple choice questions about math, time, measurement, and word problems.
2. Questions involve calculating sums, differences, ratios, lengths, masses, and time conversions.
3. Answer choices are provided for each question.
Exam paper2
1. The document contains a mathematics test for year 3 students with 20 multiple choice and problem solving questions covering topics like: conversions between units (meters to centimeters, weeks to days), addition, subtraction, multiplication, division, time, mass, and word problems.
2. The test is 30 minutes long and includes questions that are worth 1 mark or 2 marks depending on difficulty.
3. The final few questions are multi-step word problems involving concepts like sharing quantities evenly between containers, finding missing values, and calculating end times based on start times and durations.
More Related Content
What's hot
Order Of Operations
The document discusses order of operations, which is the order in which mathematical operations should be performed in a problem containing multiple operations. The standard order is: 1) operations within parentheses, 2) exponents, 3) multiplication and division from left to right, 4) addition and subtraction from left to right. It provides examples of solving problems using the proper order of operations and asks readers to try solving sample problems on their own.
Presentation on inverse proportion
This document discusses direct and inverse proportions.
Direct proportion means that as one quantity increases, the other increases by the same ratio. They form a straight line graph passing through the origin.
Inverse proportion means that as one quantity increases, the other decreases. The quantities are inversely related by a constant factor. Their relationship forms a curved line graph.
Examples of direct and inverse proportions are provided along with their equation representations and graphs. Key features of these graphs are highlighted.
Converting fraction into decimals and vice versa(MAth 7)
This document provides instruction on converting fractions to decimals and vice versa. It begins with examples of writing fractions in simplest form. It then defines different types of decimals, such as terminating, repeating, non-terminating, and non-repeating decimals. Methods for manually converting fractions to decimals are presented, including multiplying the fraction to get a power of ten in the denominator. Examples are provided of writing fractions as decimals and decimals as fractions in simplest form. The document concludes with a lesson quiz as an assignment.
Order of Operations
The document discusses the order of operations in mathematics. It explains that the order of operations (PEMDAS) - Parentheses, Exponents, Multiplication, Division, Addition, Subtraction - provides rules for which operations to perform first in a mathematical expression without changing the result. It provides examples of evaluating expressions using the proper order of operations and also provides links to online games for practicing order of operations skills.
Adding and subtracting fractions
Adding and subtracting fractions involves making the bottom numbers the same by finding the lowest common multiple and multiplying the top numbers of each fraction by the same amount. Then the top numbers are either added or subtracted, while keeping the bottom number the same, to obtain the final fraction answer. The document provides steps for adding the fractions 3/4 and 1/3 as an example.
Multiplying polynomials
The document describes three methods for multiplying polynomials:
1) The distributive property, which involves multiplying each term of one polynomial with each term of the other.
2) FOIL (First, Outer, Inner, Last), which is a mnemonic for multiplying binomials by multiplying corresponding terms.
3) The box method, which involves drawing a box and writing one polynomial above and beside the box, then multiplying corresponding terms. Examples are provided to demonstrate each method.
Add and Subtract Decimals
This document provides instructions for adding and subtracting decimals. It explains that when adding or subtracting decimals, you should line up the decimal points and place values. Then you perform the calculation, carrying or borrowing values as needed just as you would with whole numbers. Examples are provided of adding decimals with sums of 5.78 + 4.46 and 4.39 + 8.72. Examples of subtracting decimals include 9.34 - 4.27 and 10.83 - 3.92. Practice problems are also included for the reader to try.
Operations with integers
Integers include all whole numbers and their opposites, and zero. The key rules for operations with integers are:
1) Adding integers of the same sign yields a positive sum, while those of opposite signs subtracts and uses the sign of the larger number.
2) Multiplying and dividing integers follows sign rules - same signs yield a positive result, different signs a negative one.
3) To subtract integers, change the operation to addition by changing the subtraction sign to addition and changing the sign of the number being subtracted.
Comparing And Ordering Decimals
1) The document discusses ordering decimals from least to greatest using place value and number lines. It provides examples of ordering prices from a McDonald's menu and test scores.
2) Equivalent decimals have the same value even if they have a different number of decimal places. Annexing zeros by adding trailing zeros does not change a decimal's value.
3) To order decimals from least to greatest, decimals are first lined up and zeros are annexed to give each number the same number of decimal places. Then the decimals are compared using place value starting from the left.
Decimals
The document discusses decimals and their relationship to fractions. It explains that decimals extend the place value system to include values less than one. The value of each place decreases by a factor of ten as you move to the right of the decimal point. Decimals can be added, subtracted, multiplied and divided using standard algorithms. Terminating decimals can be converted to fractions by writing the decimal as the numerator over an appropriate power of ten as the denominator. Repeating decimals can be converted to fractions by writing the repeating portion as the numerator over nines and zeros in the denominator.
Cartesian Coordinate Plane - Mathematics 8
This document explains the Cartesian coordinate plane. It describes how the plane is divided into four quadrants by the x and y axes which intersect at the origin. It provides examples of plotting points using ordered pairs with coordinates (x,y). The document also notes that Rene Descartes developed this system by combining algebra and geometry. It includes an activity for students to physically position themselves on the x and y axes to learn the coordinate system.
Add & Subtract Fractions
This document provides an overview of fractions including:
- Definitions of proper, improper, and mixed numbers
- Equivalent fractions and how to identify them
- Ordering fractions with both like and unlike denominators
- Adding and subtracting fractions with both like and unlike denominators
- Examples are provided for each concept along with practice problems for students to work through
The document covers essential fraction concepts and provides clear explanations, examples, and practice problems to help students understand fractions.
Dividing integers
The document discusses dividing integers and their rules:
- There are four rules for dividing integers based on the signs of the numbers: two positives or negatives give a positive, opposite signs give a negative.
- Examples are provided to demonstrate applying the rules.
- The mean, or average, of a data set is calculated by summing the values and dividing by the number of values.
- Order of operations must be followed when evaluating expressions.
Multiplying & dividing rational algebraic expressions
This document discusses how to multiply and divide rational algebraic expressions. It explains that to multiply rational expressions, one multiplies the numerators and denominators separately. Rational expressions must first be factored to cancel common factors before multiplying. Several examples of multiplying rational expressions are shown. The document also explains that to divide rational expressions, one multiplies the numerator by the reciprocal of the denominator. Some examples of dividing rational expressions are provided.
Direct proportion
This document discusses direct proportion and methods for solving direct proportion problems. Direct proportion exists when two quantities change at a constant rate with respect to each other. The cross-multiplication method can be used to solve direct proportion problems by setting up a proportion between the known quantities and cross-multiplying to solve for the unknown quantity. Graphs of direct proportion relationships will always produce a straight line passing through the origin.
Adding Integers Ppt
The document provides examples and instructions for adding and subtracting integers using a number chip method. It explains that to add integers with the same sign, the numbers are added together, while to add integers with different signs, the smaller number is subtracted from the larger number and the sign of the larger number determines the sign of the answer. For subtracting integers, the opposite of the number being subtracted is added instead. Several examples are worked through to demonstrate these methods.
Quadratic functions and their application
Quadratic functions have several real-life applications and can be used to model mathematical problems. To solve problems involving quadratic functions, identify given information, represent the problem as a function, and consider the maximum or minimum property to solve for the final answer. Examples provided demonstrate solving for unknown variables in quadratic equations derived from word problems about rectangles, consecutive numbers, and the dimensions of a tennis table.
Rectangular coordinate system
This document defines and explains the rectangular coordinate system. It begins by introducing Rene Descartes as the "Father of Modern Mathematics" who developed the Cartesian plane. The Cartesian plane is composed of two perpendicular number lines that intersect at the origin (0,0) and divide the plane into four quadrants. Each point on the plane is identified by an ordered pair (x,y) denoting its distance from the x-axis and y-axis. The sign of the x and y values determines which quadrant a point falls into. Examples are provided to identify points and their corresponding quadrants.
Strategies for solving math word problems
This document discusses several different methods for solving math word problems:
- The Toolbox Method allows students to choose from multiple strategies to find the one that works best for them.
- The CUBES Method is well-suited for visual learners as it has them dissect and analyze the word problem.
- The STEPS Method provides students with a sequential structure to follow when solving word problems.
- The Step by Step Method also provides a step-by-step process and works well for logical, sequential thinkers.
Ratio ppt
The document defines and provides examples of ratios. Key points:
- A ratio compares two quantities and expresses their relationship. Order matters in a ratio (e.g. 2 to 3 is not the same as 3 to 2).
- Ratios can be written in three equivalent forms: a:b, a to b, or as a fraction a/b.
- Equivalent ratios can be formed by simplifying ratios (reducing to lowest terms) or multiplying the original ratio by a number.
- Examples show calculating and writing ratios for various scenarios involving groups of objects.
What's hot (20)
Converting fraction into decimals and vice versa(MAth 7)
Converting fraction into decimals and vice versa(MAth 7)
Multiplying & dividing rational algebraic expressions
Multiplying & dividing rational algebraic expressions
More from Nurul Naiemah
Exam paper1
1. The document contains 40 multiple choice questions about math, time, measurement, and word problems.
2. Questions involve calculating sums, differences, ratios, lengths, masses, and time conversions.
3. Answer choices are provided for each question.
Exam paper2
1. The document contains a mathematics test for year 3 students with 20 multiple choice and problem solving questions covering topics like: conversions between units (meters to centimeters, weeks to days), addition, subtraction, multiplication, division, time, mass, and word problems.
2. The test is 30 minutes long and includes questions that are worth 1 mark or 2 marks depending on difficulty.
3. The final few questions are multi-step word problems involving concepts like sharing quantities evenly between containers, finding missing values, and calculating end times based on start times and durations.
Subtract mixed number baru
This document provides instructions for subtracting different combinations of whole numbers and mixed numbers. It outlines how to subtract a whole number from a mixed number, subtract mixed numbers from each other, and subtract a mixed number from a whole number by first changing the whole number into a mixed number.
Name mixed
This document discusses mixed numbers, which are numbers that contain both a whole number and a fraction. It provides examples of writing mixed numbers in words and numerals, such as "one and one half" or "1 1/2". Students are asked to write mixed numbers in words, convert between words and numerals, and illustrate mixed numbers using diagrams.
Multiplication of fractions
The document provides two examples of multiplying fractions and encourages the reader to try solving similar problems. It also describes a scenario where Spongebob finds a secret note asking him to solve math problems to save his friends Mr. Crab and Squidward who have gone missing from the Krusty Krab restaurant. The note wishes the reader good luck in solving the problems.
Fractions mixed number
This document provides instructions for converting mixed numbers to improper fractions and adding mixed numbers. It contains the following key points:
1) To convert a mixed number to an improper fraction, multiply the whole number by the denominator and add it to the numerator.
2) When adding mixed numbers, change them to improper fractions first by multiplying the whole number by the denominator. Keep the same denominator and add the numerators.
3) Examples are provided to demonstrate converting mixed numbers to improper fractions and adding mixed numbers by changing them to improper fractions first.
Add mixed same_deno
This document provides examples for adding mixed numbers with the same denominators. It shows how to circle the common denominators, add the whole numbers, and then add the numerators of the proper fractions. Examples are provided for adding two and three mixed numbers together. Review questions are included at the end to test understanding.
Add mixed same_deno
This document provides examples for adding mixed numbers with the same denominators. It shows how to circle the common denominators, add the whole numbers, and then add the numerators of the proper fractions. Examples are provided for adding two and three mixed numbers together. Review questions are included at the end to test understanding.
3 dshape friday
The document provides an overview of 3D shapes including cubes, cuboids, and pyramids. It discusses building 3D shapes using straws and plasticine to represent faces, edges, vertices, and bases. It asks questions about identifying shapes, the number of straws used to build a cube, and the number of faces a pyramid has. The overall document introduces 3D shapes and has an interactive activity for students to learn about their characteristics.
Fractions mixed number
This document provides instructions for converting mixed numbers to improper fractions and adding mixed numbers. It explains that to convert a mixed number to an improper fraction, you multiply the whole number by the denominator and add it to the numerator. When adding mixed numbers, change them to improper fractions first by multiplying the whole number by the denominator, then add the numerators and keep the original denominator. It includes examples of converting mixed numbers to improper fractions and adding mixed numbers, and encourages practicing these steps independently.
Shape latest
The document introduces common 3D shapes like cylinders, cuboids, and pyramids. It discusses their defining characteristics and provides examples of objects in daily life that have these shapes. The document also includes practice questions about identifying shapes from their nets and riddles describing 3D shapes.
Shape latest
The document introduces common 3D shapes including cylinders, cuboids, and pyramids. It discusses their nets and provides examples of objects with each shape. Questions are asked about identifying shapes from nets, drawing a pyramid net, and naming objects of different shapes. Riddles are presented describing objects in cylindrical, cuboidal, and pyramidal shapes.
Presentation weight
The document discusses the relationship between kilograms and grams, noting that 1 kilogram equals 1000 grams. It provides this information in a song and examples to reinforce that 1 kg = 1000 g and vice versa. Examples show converting between kilograms and grams.
More from Nurul Naiemah (13)
Recently uploaded
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
CALL 8867766396 SATTA MATKA | DPBOSS | KALYAN MAIN BAZAR | FAST MATKA | DPBOSS GUESSING | TARA MATKA | KALYAN CHART | MATKA BOSS
ModelingMarketingStrategiesMKS.CollumbiaUniversitypdf
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
Company Valuation webinar series - Tuesday, 4 June 2024
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Schedule Unveiled
3 Simple Steps To Buy Verified Payoneer Account In 2024
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership at Agile Tour Geneve 2024
2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...
This presentation provides a thorough examination of Over-the-Top (OTT) platforms, focusing on their development and substantial influence on the entertainment industry, with a particular emphasis on the Indian market.We begin with an introduction to OTT platforms, defining them as streaming services that deliver content directly over the internet, bypassing traditional broadcast channels. These platforms offer a variety of content, including movies, TV shows, and original productions, allowing users to access content on-demand across multiple devices.The historical context covers the early days of streaming, starting with Netflix's inception in 1997 as a DVD rental service and its transition to streaming in 2007. The presentation also highlights India's television journey, from the launch of Doordarshan in 1959 to the introduction of Direct-to-Home (DTH) satellite television in 2000, which expanded viewing choices and set the stage for the rise of OTT platforms like Big Flix, Ditto TV, Sony LIV, Hotstar, and Netflix. The business models of OTT platforms are explored in detail. Subscription Video on Demand (SVOD) models, exemplified by Netflix and Amazon Prime Video, offer unlimited content access for a monthly fee. Transactional Video on Demand (TVOD) models, like iTunes and Sky Box Office, allow users to pay for individual pieces of content. Advertising-Based Video on Demand (AVOD) models, such as YouTube and Facebook Watch, provide free content supported by advertisements. Hybrid models combine elements of SVOD and AVOD, offering flexibility to cater to diverse audience preferences.
Content acquisition strategies are also discussed, highlighting the dual approach of purchasing broadcasting rights for existing films and TV shows and investing in original content production. This section underscores the importance of a robust content library in attracting and retaining subscribers.The presentation addresses the challenges faced by OTT platforms, including the unpredictability of content acquisition and audience preferences. It emphasizes the difficulty of balancing content investment with returns in a competitive market, the high costs associated with marketing, and the need for continuous innovation and adaptation to stay relevant.
The impact of OTT platforms on the Bollywood film industry is significant. The competition for viewers has led to a decrease in cinema ticket sales, affecting the revenue of Bollywood films that traditionally rely on theatrical releases. Additionally, OTT platforms now pay less for film rights due to the uncertain success of films in cinemas.
Looking ahead, the future of OTT in India appears promising. The market is expected to grow by 20% annually, reaching a value of ₹1200 billion by the end of the decade. The increasing availability of affordable smartphones and internet access will drive this growth, making OTT platforms a primary source of entertainment for many viewers.
Part 2 Deep Dive: Navigating the 2024 Slowdown
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
-- June 2024 is National Volunteer Month --
Check out our June display of books on voluntary organisations
Building Your Employer Brand with Social Media
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
How MJ Global Leads the Packaging Industry.pdf
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
Income Tax exemption for Start up : Section 80 IAC
A presentation on the concept of Exemption of Profits of Start ups from Income Tax
一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Recently uploaded (20)
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
ModelingMarketingStrategiesMKS.CollumbiaUniversitypdf
ModelingMarketingStrategiesMKS.CollumbiaUniversitypdf
Company Valuation webinar series - Tuesday, 4 June 2024
Company Valuation webinar series - Tuesday, 4 June 2024
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
3 Simple Steps To Buy Verified Payoneer Account In 2024
3 Simple Steps To Buy Verified Payoneer Account In 2024
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership Agile Tour Geneve 2024
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...
The Influence of Marketing Strategy and Market Competition on Business Perfor...
The Influence of Marketing Strategy and Market Competition on Business Perfor...
The Influence of Marketing Strategy and Market Competition on Business Perfor...
The Influence of Marketing Strategy and Market Competition on Business Perfor...
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Income Tax exemption for Start up : Section 80 IAC
Income Tax exemption for Start up : Section 80 IAC
Multiplication of decimals
- 1. MULTIPLICATION OF DECIMALS
- 2. EXAMPLE 1
- 3. TRY IT !!
- 4. EXAMPLE 2
- 5. EXAMPLE 3
- 6. TRY IT !!
- 7. Steps in Multipliying Decimals
- 8. Step 1 Align the decimal numbers in the right column E.g : 2.314 x 5 = Tens Ones . Tenths Hundredths Thousandhts
- 9. Step 2 Multiply the decimal numbers starting from the right. Tens Ones Tenths Hundredths Thousandhts . 2 . 3 1 4 x 5
- 10. Step 3 Align the decimal point straight. Tens Ones Tenths Hundredths Thousandhts . 2 . 3 1 4 x 5 1 1 . 5 7 0
- 11. qUESTIONS time!
- 12. GROUP WORK!!
- 13. SUMMARY!!