No matter how harsh the environment or how extreme the temperature, you’re sure to find a Molykote® brand lubricant worthy of the challenge. When you specify maintenance products from Dow Corning, you’re specifying the results of more than 60 years of innovations by a world leader in lubrication technology. With dedicated global research and development operations, Molykote brand lubricants from Dow Corning bring you the best in assembly and maintenance technology from around the world. Our knowledgeable sales professionals will help you choose the right lubricating product for your unique maintenance needs.
Now get Molykote products from India'a leading distributor for Molykote products - Project Sales Corporation.
Molykote 33 Grease in India, Call Project Sales Corp +91-891-2564393
1. Product Information
Specialty
Lubricants MOLYKOTE® 33 Medium
Silicone Grease
FEATURES Lubricating grease for metal/metal, metal/plastic combinations
• High oxidation resistance involving slow to medium-fast movements and light load,
especially over a wide range of temperatures
• Wide service temperature
range (-73°C to +180°C) APPLICATION
• Good low-temperature performance • Used successfully for rollers in mobile refrigerating equipment and
• Compatible with many plastics refrigerating plants, control cables, electric clocks, motors, windscreen wiper
motors, vehicle starter motors, photographic and optical equipment, surveying
• Water resistant instruments.
COMPOSITION TYPICAL PROPERTIES
• Silicone oil Specification writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales representative prior to writing specifications
• Lithium soap on this product.
Standard* Test Unit Result
The dye changes color on standing. This
color change does not affect the
serviceability of the grease
Color Pink
Consistency, density, viscosity
DIN 51 818 NLGI consistency class 2
ISO 2137 Worked penetration mm/10 260-300
ISO 2811 Density at 20°C g/ml 1.0
DIN 51 562 Base oil viscosity at 25°C mm²/s 100
Temperature
Service temperature °C -73 to +180
ISO 2176 Drop point °C 220
ASTM- Low temperature torque test at -73°C
D-1478-80
Initial break-away torque Nm 164x10ª³
Torque after 20 minutes running time Nm 22x10ª³
Load-carrying capacity
Four-ball tester (VKA)
DIN 51 350 pt.4 Weld load N 1500
Oil separation
DIN 51 817 Standard test, 7 days at 40°C % 1.6
* ASTM: American Society for Testing and Materials.
ISO: International Standardisation Organisation.
DIN: Deutsche Industrie Norm.
HOW TO USE used in central lubrication systems.
Do not mix with other greases.
How to apply
Clean points of contact. As is usual Because of the variation of plastic
with lubricating greases, apply by quality, compatibility tests should be
means of a brush, spatula, or carried out for swelling and
automatic lubrication device. Can be shrinkage, stress-crack formation and