Ayman Mitkees is a senior civil engineer with over 6 years of experience in construction projects. He has worked on large projects such as Mall of Egypt, water treatment plants, and housing developments. Mitkees has strong technical skills in areas like construction supervision, planning, safety management, and computer-aided design. He seeks a position where he can utilize his experience to oversee project activities and ensure timely completion of construction works.

1. Ayman Mostafa Abd El Haleem Mitkees
Address: 6 buildings of Sadie Nosh St
Heliopolis, Cairo, Egypt]
Passport Number: A06629930
Driving license: Valid
Member of Egyptian Syndicate of Engineers
Member of Federation of Arab Engineers
Mob1: 00201126216362
Mob2: 00201069207979
Email:ayman.mitkees@hotmail.com
Military status: Finished
Marital status: Single
Date of birth: 19-Oct-1987
Nationality:Egyptian
Personal Profile/ Career Objective
I am a Senior Civil Engineer with prefect experience in construction, finishing works, good in planning
works, high experience in technical office engineering works & Safety works, I had a good experience
in starting and handing over of different kinds of projects, gaining a good knowledge about different
method statement of construction.
Big Experience in construction works through three different companies in four big projects Mall of Egypt
project, Namera Albasal treatment station of potable water & sanitation of 8,000 m3/day capacity project,
treatment station of potable water & sanitation with Development of lakes oxidation of 45,000 m3 / day
capacity project, Housing project army officers at 15 May City project.
Experience Years: 6 years
I had big experience in dealing and Implementation of projects with Multi internationals companies
Construction companies like (BESIX, ORASCOM Construction companies at Mall of Egypt project)
I had big experience in dealing and Implementation of projects with Multi internationals companies
Construction companies like (BESIX, ORASCOM Construction companies at Mall of Egypt project)
Education
Faculty of Engineering - Civil Engineering Department - Shorouk Academy
Bachelor of Engineering (BEng), Structural Engineering(2005-2010) Cumulative
Grade: Good (73%)
Graduation Project: (Structure Engineering Project)
Design a Villa house with bad room, 4 floors & roof by ultimate method
Design a residential tower of 30 floor under earthquake & wind effect by ultimate
method
Degree of Graduation Project: Very Good Degree: Very Good

2. Employment history
August 2014 – until now [Senior Site & Technical Office Engineer] [SELECT
INTERNATIONAL Co.]
Implementation of flooring & facades of Mall of Egypt project
Project Description: -
Mall of Egypt located in Giza -6 October city- El Wahat Street in front of Media city, and consists
of two levels, on the road to the oases in 6 October City and includes 444,000 square meters of space
available for leasing commercial space. The shopping center accommodates 420 shop to provide
products and services, including top brands and international brands and focuses Mall of Egypt to provide
"the happiest moments of all people," every day through a variety of restaurants and entertainment
venues, And it includes more than 50 Restaurant & Cafe, in addition to VOX Cinema Hall, which includes
21 display screen for the first time in Egypt, there will be 4D cinema screens., and the city of Magic Planet
Toys, and (Ski Egypt), which is the first indoor ski slope glacier on the African continent. a Ski Slope over a
quarter of a kilo meter long, and it contains Mall of Egypt Carrefour hypermarket and parking
accommodate 6,500 cars. Egypt is scheduled to open in the mall in September 2016 with a total
investment of 5 billion Egyptian pounds.
Project consists of 2 levels and divided into 8 zones (City Mall, Sand Mall, Crystal Mall, SKI, FEC
{FAMILY ENTERTAINMENT CENTER}, Welcome Courts, VOX Cinema, Plaza)
Project budget: 5 million LE.
Project Area: 444,000 m2
Owner: Majid Al Futtaim
Main Contractor: BESIX-ORASCOM
Civil & Architect Consultant: RMC (Raafat Miller Consultant) MEP
Consultant: SHAKER (SHAKER Consultancy Group)
Sub-Contractor: SELECT INTERNATIONAL CO.
Responsible for: -
Responsible for Mall Zone (Divided into 3 Areas City Mall, Sand Mall & Crystal Mall) on
following items: -
1.Installation the frame work of the screed patterns and castthem
2.Flooring granite installation by adhesive glue (Laticrete 300) and finishing by grouting, which
installed on screed patterns
3.Installation of granite tiles of Mall columns by Mechanical method and finishing them
Responsible for SKI zone on following items: -

3. 1.Installation the frame work of the screed patterns and castthem
2.flooring granite installation by adhesive glue (Laticrete 300) and finishing by grouting, which
installed on screed patterns
3.Installation of granite tiles of SKI facades by Mechanical method and finishing them 4.
Installation of granite tiles of SKI columns by Mechanical method and finishing them
Responsible for FEC (FAMILY ENTERTAINMENT CENTER) zone on following items: -
1.Installation the frame work of the concrete screed patterns and castthem
2.flooring granite installation by adhesive glue (Laticrete 300) and finishing by grouting, which
installed on screed patterns
3.Installation of granite tiles of FEC facades by Mechanical method and finishing them 4.
Installation of granite tiles of FEC columns by Mechanical method and finishing them
Responsible for Welcome Court zones on following items: -
1. Installation the frame work of the screed patterns and castthem
2.flooring granite installation by adhesive glue (Laticrete 300) and finishing by grouting, which
installed on screed patterns
3.Installation of granite tiles of Welcome court facades by adhesive glue (Laticrete 254) and finishing
by grouting.
Skills
•works technical office management of the company in the work of the technical follow-up of ongoing
projects and to prepare the necessary documents to enter the bidding of the RFQ and prepare schedules
for projects (Primavera 6. -Office programs -AutoCAD)
•Supervision and controlling safety for all of work & Make all safety permits (Daily, Weekly,
monthly permits) which submitted to Main Contractor
• Site Supervision through various construction activities (concretes, finishes, interiors)
• Make Daily, Weekly& mouthy Reports for progress of the work
• Ensure works are completed to the highest quality standards and to specifications on the
drawings
• Prepare and execute a resource plan based on work program considering both human resources
and plant resources
• Manage with the consultant the work day by day to prevent delaying requests
• Preparing structural shop drawings and coordinating them with architectural and
electromechanical drawings
•Manages onsite project activities and oversees total construction efforts to insure project is
constructed in accordance with scope, budget and schedule.
•Supervises and manages main contractor activities to the satisfaction of all project delivery goals.
•Manages and resolves all on-site conflict to the satisfaction of project requirements.
•Works with the project management team to identify project objectives with alignment to the scope,
budget and schedule.
•Coordinates all activities with the Solutions and Services Operation teams for the efficient
allocation of resources ensuring that project objectives are met.
•Develops and maintains viable long-term relationships with consultants, main contractor and
subcontractors.

4. •Attends job progress meetings as required.
•Ensures main contractor and sub-contractors understand expectations of the project.
•Ensures Quality Control and scope of work compliance through daily site inspections.
•Submits regular progress updates for incorporation into master plan/schedule to provide
variance analysis reporting.
•Resolves site conflicts regarding the sequencing of work and unforeseen conditions.
•Coordinates facility access and ensures appropriate site-working environments. Works
with Project Manager in managing risks.
•Ensures recovery plans are carried out.
•Develops and maintains a Continuous Improvement feedback structure with the main
contractor to continuously drive cost reduction and project efficiency.
March 2012 – August 2014 [Site & Technical Office Engineer] [MASA FOR URBAN
DEVELOPMENT Co.]
Implementation two (2) projects
First project: - (July 2013-March 2012)
Namera Albasal treatment station of potable water & sanitation (8,000 m3/day
capacity) -Gharbia Governorate-Egypt
Project Description: -
The project is located Namera Albasal village at Gharbia Governorate with 8,000 m3 / day working
S.B.R mechanical aeration tank system and the project was successfully delivered, the owner of National
Authority For Potable Water and Sewage ,(World Bank financing) Advisory Office Supervisor - Egypt
Consulting Engineers on an area (21500 m2), project consists of Sewer & expulsion lines, pumps building,
chlorine building, transformers building, pumps building, sludge building, Station fence 5 km on area,
landscape of station
Project budget: 100 million LE.
Project Area:1200,000 m2
Owner: NATIONAL AUTHORITY FOR POTABLE WATER AND SEWAGE
Consultant: ENGINEERING CONSULTING BUREAU
Main Contractor: GENERAL EGYPTIAN COMPANY FOR CONSTRUCTION
Sub-contractor: MASA FOR URBAN DEVELOPMENT
Responsible for: -
•The supervision through implementation of various construction activities of Sewer & EXPULSION LINES,
pumps building, chlorine building, transformers building, pumps building, sludge building, landscape of
station, roads between buildings, Station fence 5 km on area ()
•The work of the technical office management of the company in the work of the technical follow-up of
ongoing projects and to prepare the necessary documents to enter the bidding of the RFQ and prepare
schedules for projects (Primavera 6. -Office programs -AutoCAD)
• Processing and working cost estimate of exceeded and renewal items and submit them to the owner
• Processing and working The schedule for the project items and submit them to the owner

5. • Processing and working price differences items and submit them to the owner
•Manages site project activities and oversees total construction efforts to insure project is
constructed in accordance with scope, budget and schedule.
• Site Supervision through various construction activities (concretes, finishes, interiors)
• Ensure works are completed to the highest quality standards and to specifications on the
drawings
• Prepare and execute a resource plan based on work program considering both human resources
and plant resources
• Manage with the consultant the work day by day to prevent delaying requests
• Preparing structural shop drawings and coordinating them with architectural and
electromechanical drawings
• Checking quantity take-offs of concrete and steel from drawings vs. B.O.Q quantities
Coordinate the mechanical works with MEP subcontractor (Drake &Skull).
• Coordinate with technical office FCR’s, RFIs’ and with QC for MIRs’, MARs’ and MSs’.
• Submitting the work to QC and Consultant supervisor
• Controlling the percentage of completion of each activity to ensure follow up the project schedule.
• Risk assessments and weekly HSE walkthrough checks.
• To ensure & control that works are carried out as per approved shop drawings.
• Follow up the updates for done works.
• Produce and follow up the snagging list (punch list) before final handing over.
• Manage the site, supervision subcontractors, tool box talks, site setups and site safety
inductions.
• All the work of a company letter that offers to the contractor and consultant and owner.
• Preliminary handover of the project to the owner.
Second Project: - (July 2013-August 2014)
New Cairo treatment station of potable water & sanitation with Development of lakes
oxidation of 45,000 m3 / day capacity
Project Description: -
New Cairo treatment station of potable water & sanitation with Development of lakes oxidation
of 45,000 m3 / day capacity of the extended aeration system in New Cairo under the executive branch of
drinking water and sanitation supervision of Greater Cairo and the Egyptian Advisory Group Consulting
Engineers - Aeczk project
The project is located at El Sokhna road at new Cairo city, Cairo Government on an area (1.2 Km2), the
capacity of station was 45,000 m3/day, project consists of sewer & expulsion lines, pumps building,
chlorine building, transformers building, pumps building, sludge building, Station fence 5 km (Rectangle
shape Length 1.2 km, width 1.0 km) on area
Project budget :250 million LE.
Project area :1.2 km2
Owner: NATIONAL AUTHORITY FOR POTABLE WATER AND SEWAGE
Consultant: EGEC (Egyptian Group for Engineering Consultancy)

6. Main Contractor: GENERAL EGYPTIAN COMPANY FOR CONSTRUCTION
Sub-contractor: MASA FOR URBAN DEVELOPMENT
Responsible for: -
• Supervision through implementation of various construction activities of sewer & expulsion lines, pumps
building, chlorine building, transformers building, pumps building, sludge building, landscape of station,
roads between buildings, Station fence 5 km on area ()
•The work of the technical office management of the company in the work of the technical follow-up of
ongoing projects and to prepare the necessary documents to enter the bidding of the RFQ and prepare
schedules for projects (Primavera 6. -Office programs -AutoCAD)
• Processing and working cost estimate of exceeded and renewal items and submit them to the owner
• Processing and working price differences items and submit them to the owner
• Processing and working The schedule for the project items and submit them to the owner
•Manages site project activities and oversees total construction efforts to insure project is
constructed in accordance with scope, budget and schedule.
• Site Supervision through various construction activities (concretes, finishes, interiors)
• Ensure works are completed to the highest quality standards and to specifications on the
drawings
• Prepare and execute a resource plan based on work program considering both human resources
and plant resources
• Manage with the consultant the work day by day to prevent delaying requests
• Preparing structural shop drawings and coordinating them with architectural and
electromechanical drawings
• Checking quantity take-offs of concrete and steel from drawings vs. B.O.Q quantities
Coordinate the mechanical works with MEP subcontractor (Drake & Skull).
• Coordinate with technical office FCR’s, RFIs’ and with QC for MIRs’, MARs’ and MSs’.
• Submitting the work to QC and Consultant supervisor
• Controlling the percentage of completion of each activity to ensure follow up the project schedule.
• Risk assessments and weekly HSE walkthrough checks.
• To ensure & control that works are carried out as per approved shop drawings.
• Follow up the updates for done works.
• Produce and follow up the snagging list (punch list) before final handing over.
• Manage the site, supervision subcontractors, tool box talks, site setups and site safety
inductions.
• All the work of a company letter that offers to the contractor and consultant and owner.
• Preliminary handover of the project to the owner.

7. January 2011 – March 2012 [Site Engineer] [Engineering Authority Army]
Project: Housing project army officers at 15 May City-Helwan
Project Description: -
The project is located at 15 May City – Helwan Government, it is consisting of 6000 luxury
residential units, each residential unit consist of 5 floors on area 64,000,000 m2
Project budget 45 million LE. Project
Area=64,000,000 m2 Owner:
Engineering Authority Army
Main Contractor: Engineering Authority Army
Consultant: Engineering Authority Army
Responsible for: -
• Supervision through implementation 2 residential building.
• Site Supervision through various construction activities (concretes, finishes, interiors).
• Ensure works are completed to the highest quality standards and to specifications on the
drawings.
• Prepare and execute a resource plan based on work program considering both human resources
and plant resources.
• Manage sub-contractors, communicating the plans and programs monitoring productivity and
controlling payments.
•Checking quantity takeoffs of concrete and steel from drawings vs. B.O.Q quantities
July 2009 – September 2009 [Trainee Engineer] [The Arab Contractors]
•Implementation project Ebny Betak project in 10th of Ram
July 2008 – September 2008 [Trainee Engineer] [The Arab Contractors]
• Implementation of faculty of Pharmacy of Suez CanalUniversity
July 2007 – September 2007 [Trainee Engineer] [The Arab Contractors]
• Implementation of Administration building of Suez Canal University

8. Skills

9. Technical:
-Experienced in the supervision of the work of construction and finishing precision and high quality
-Experienced in dealing with the Level instrument and work of construction works and doing grind levelling
-Experienced in the work of keeping the company's rights claims in the event of any infringement or failure
or delay work to be done.
-Experienced in doing of daily-weekly-monthly reports for Work progress
-Experienced in Technical office work (quantity surveys work-preparing drawings work-materials Submittals Work-
Document Control work-procurements work, etc.)
-Oversee the safety of Construction site.
-Excellent Microsoft office (Word, Excel, Power Point, Access, Outlook & MS Project)
-Excellent with Auto CAD 2D
-Good with planning projects work
-Good with Primavera P6
-Good with SAP2000
-Excellent with Adobe programs (Acrobat Pro DC-Adobe Photoshop CC-Adobe Illustrator CC-Adobe Lightroom)
-Excellent in dealing with the Internet and engineering programs on Mobile include the following: -
1. AutoCAD mobile program
2. Microsoft Office mobile program (2013-2016)
a. Outlook
b. Word
c. Excel
d. PowerPoint
3. Adobe programs (Acrobat-Photoshop-Lightroom)
4.GPS
Interpersonal:
-Driving license
-Ability to work under pressure
-Ability to finding out solutions of construction & finishing problems, and team collaboration
-Wide knowledge of the recent aspects
-Wide knowledge of history, geography
-Experience in marketing and financialissues
Other:
-Communication – being able to listen/talk to people in a constructive manner
-Interpersonal – The way you relate and interact with others
-Numerical – being able to handle numbers, math's, estimations, etc.
-Analytical – being able to give meaning to data, analyses information
-Problem-solving – being able to offer solutions to problems
-Teamwork – being able to work with other people to achieve a common goal
-Leadership – being able to take responsibility, lead/mentor others, etc.
-Organization – being able to meet deadlines, plan and schedule tasks, etc.

10. Hobbies and interests
I hope to find a job opportunity in such a respectful organization in the field of Civil
I appreciate your time reviewing my profile, and it will be a pleasure for me to attend an
interview with you at your convenient time or just contact me.
I am looking forward to hearing from you.
I appreciate your time reviewing my profile, and it will be a pleasure for me to attend an
interview
with you at your convenient time or just contact me. I am
looking forward to hearing from you.
Courses
1. PMP Certification Exam Preparation Course (29-01-2016/11-03-2016)
2. Project Control Sheet and Budget Planning (30-12-2015/30-01-2016)
3. Planning & Cost Control Professional using Primavera 6 (PCCP) P6/R8.6(20-08-15/26-10-15)
4. Site Engineer training course issued on 2015
5. AutoCAD 2D of appreciation Excellent on 18-08-2009
6. SAP 2000 of appreciation Excellent on 18-08-2009
7. Civil Diploma course of appreciation Excellent on2008
8. Certificated of OSHA Courses on March 2015 And it includes the following: -
a) OSHA Construction Industry safety & health (29 CFR1926)
b) OSHA General Industry Safety & Health (29CFR 1910)
c) Platinum Certificate in Emergency and DisasterManagement
d) Hazard Identification and Hazard analysis
e) Safety & health Programs
f) Safety Management Diploma
g) Implementation of SMS Systems
h) Accident and Investigations Reports
i) Effective Safety committee meetings
j) Safety reports and forms
k) Safety Management system evaluation
l) Safety self-Inspections
m) Safety training Methods
n) Work permit
9. Professional employee making license issued on 2015-2016
(from Philadelphia international university {PIU})
10. Presentation Seminar of Whole levels & Parts of (PEML License)