To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
OS VERIFICATION- A SURVEY AS A SOURCE OF FUTURE CHALLENGESIJCSES Journal
Formal verification of an operating system kernel manifests absence of errors in the kernel and establishes trust in it. This paper evaluates various projects on operating system kernel verification and presents indepth survey of them. The methodologies and contributions of operating system verification projects have been discussed in the present work. At the end, few unattended and interesting future challenges in
operating system verification area have been discussed and possible directions towards the challenge solution have been described in brief.
OS VERIFICATION- A SURVEY AS A SOURCE OF FUTURE CHALLENGESIJCSES Journal
Formal verification of an operating system kernel manifests absence of errors in the kernel and establishes trust in it. This paper evaluates various projects on operating system kernel verification and presents indepth survey of them. The methodologies and contributions of operating system verification projects have been discussed in the present work. At the end, few unattended and interesting future challenges in
operating system verification area have been discussed and possible directions towards the challenge solution have been described in brief.
Software Engineering : Software Quality Assurance
Software Quality Metrics and its relation to various stages of software development. The process of quality assurance and Examples are elaborated
A Compound Metric for Identification of Fault Prone Modulesiosrjce
IOSR Journal of Computer Engineering (IOSR-JCE) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of computer engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in computer technology. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE MOBILECOMPUTING PROJECT Vampire attacks draining life from w...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
Software Engineering : Software Quality Assurance
Software Quality Metrics and its relation to various stages of software development. The process of quality assurance and Examples are elaborated
A Compound Metric for Identification of Fault Prone Modulesiosrjce
IOSR Journal of Computer Engineering (IOSR-JCE) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of computer engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in computer technology. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE MOBILECOMPUTING PROJECT Vampire attacks draining life from w...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
Mind’s Eye Solutions, Inc. is a leading provider of high-quality in biometric identity management systems, applications and services. Our global presence combines innovative products and services with a continuing dedication to customer support and social responsibility.
The company's offerings include a wide range of multi model biometric solutions, which are used to capture and process the unique physiological characteristics of individuals to verify their identities—protecting and securing people, property and privacy.
Schools, Colleges and Universities & Offices agree, RF ID is the Identification Solution Provider, when it comes to education. Improve productivity, efficiency, save time, money and even lives with a fully integrated student ID system including access control, time and attendance and video surveillance
Mind’s eye launched “VIDYARTHI RAKSHA DIGITAL CARD” in 2012 especially for student secure& attendance system includes biometrics and Proximity Card based comprehensive attendance management system for schools and colleges. secure and automatic attendance management system for both, Students and Staff. Mind’ Eye is built on cutting edge modern technology and designed to help schools and Parents/Guardians to deal with problems of truancy/absenteeism . Not only will you be able to track and manage student attendance to a granular level
Mind’s Eye Solutions attendance software has an integrate facility of sending automatic SMS alerts to the Parents/Guardians of the students.
o
In Iterative model, iterative process starts with a simple implementation of a small set of the software requirements and iteratively enhances the evolving versions until the complete system is implemented and ready to be deployed.
Dairy management system project report..pdfKamal Acharya
ASP.NET is the next version of Active Server Pages (ASP); it is a unified Web development platform that provides the services necessary for developers to build enterprise-class Web applications. While ASP.NET is largely syntax compatible, it also provides a new programming model and infrastructure for more secure, scalable, and stable applications. ASP.NET is a compiled, NET-based environment, we can author applications in any .NET compatible language, including Visual Basic .NET, C#, and JScript .NET. Additionally, the entire .NET Framework is available to any ASP.NET application. Developers can easily access the benefits of these technologies, which include the managed common language runtime environment (CLR), type safety, inheritance, and so on. ASP.NET has been designed to work seamlessly with WYSIWYG HTML editors and other programming tools, including Microsoft Visual Studio .NET. Not only does this make Web development easier, but it also provides all the benefits that these tools have to offer, including a GUI that developers can use to drop server controls onto a Web page and fully integrated debugging support.
Thales has been deploying Arcadia and Capella MBSE methods and tools for the past 15 years. As for any journey, there have been many joys and not less difficulties.
During this webinar, Thales presents the foundations of their MBSE approach, how their engineering practices have been improved with the use of models, and what are they doing now to sustain and drive this model-based transformation.
---------
This webinar was driven by Juan Navas (from Thales)
Juan Navas is a Systems Architect with +10 years’ experience on performing and implementing Systems Engineering practices in industrial organizations. He accompanies systems engineering managers and systems architects implement Model-Based Systems Engineering and Product Line Engineering approaches in operational projects, helping them defining their engineering strategies, objectives and practices.
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE MOBILECOMPUTING PROJECT Optimal multicast capacity and delay...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE MOBILECOMPUTING PROJECT On the real time hardware implementa...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE MOBILECOMPUTING PROJECT Mobile relay configuration in data i...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE MOBILECOMPUTING PROJECT Distributed cooperative caching in s...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE MOBILECOMPUTING PROJECT Delay optimal broadcast for multihop...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE MOBILECOMPUTING PROJECT Cooperative packet delivery in hybri...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE MOBILECOMPUTING PROJECT Content sharing over smartphone base...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE MOBILECOMPUTING PROJECT Community aware opportunistic routin...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE MOBILECOMPUTING PROJECT Adaptive position update for geograp...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE MOBILECOMPUTING PROJECT A scalable server architecture for m...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE CLOUDCOMPUTING PROJECT Attribute based access to scalable me...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE CLOUDCOMPUTING PROJECT Attribute based access to scalable me...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE CLOUDCOMPUTING PROJECT Scalable and secure sharing of person...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
DOTNET 2013 IEEE CLOUDCOMPUTING PROJECT Privacy preserving public auditing fo...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf
DOTNET 2013 IEEE MOBILECOMPUTING PROJECT Model based analysis of wireless system architectures for real-time applications
1. MODEL-BASED ANALYSIS OF WIRELESS SYSTEM
ARCHITECTURES
FOR REAL-TIME APPLICATIONS
ABSTRACT:
We propose a model-based description and analysis framework for the design of wireless system architectures.
Its aim is to address the shortcomings of existing approaches to system verification and the tracking of
anomalies in safety-critical wireless systems. We use Architecture Analysis and Description Language (AADL)
to describe an analysis-oriented architecture model with highly modular components.
We develop the cooperative tool chains required to analyze the performance of a wireless system by simulation.
We show how this framework can support a detailed and largely automated analysis of a complicated,
networked wireless system using examples from wireless healthcare and video broadcasting.
We proposed a model-based description and analysis framework for the design of wireless system architectures.
Using AADL, the de facto standard formal architecture description language, we have demonstrated how a high
level of modularity can be achieved in simulated wireless network systems. We showed that our framework can
support detailed and largely automated analysis of complicated networked wireless systems.
GLOBALSOFT TECHNOLOGIES
IEEE PROJECTS & SOFTWARE DEVELOPMENTS
IEEE FINAL YEAR PROJECTS|IEEE ENGINEERING PROJECTS|IEEE STUDENTS PROJECTS|IEEE
BULK PROJECTS|BE/BTECH/ME/MTECH/MS/MCA PROJECTS|CSE/IT/ECE/EEE PROJECTS
CELL: +91 98495 39085, +91 99662 35788, +91 98495 57908, +91 97014 40401
Visit: www.finalyearprojects.org Mail to:ieeefinalsemprojects@gmail.com
2. EXISTING SYSTEM:
In our previous working in a simulation and analysis framework for 3G broadcasting systems to address these
challenges this flexible framework facilitates not only the analysis of individual network and system modules
but also the end-to-end analysis of an entire system for providing multimedia broadcasting services.
PROBLEM DESCRIPTION:
However, the following two problems remain:
1) The description of system models and the behavior of the entire system have not been formally specified
2) The correctness of the input parameters of each module in the system and their compatibility across layers
cannot yet be verified both rigorously and automatically. This leaves the system development process
vulnerable to human errors in specification, simulation, and verification.
PROPOSED SYSTEM:
We propose a model-based description and analysis framework for the design of wireless system architectures.
Its aim is to address the shortcomings of existing approaches to system verification and the tracking of
anomalies in safety-critical wireless systems. We use Architecture Analysis and Description Language (AADL)
to describe an analysis-oriented architecture model with highly modular components.
We develop the cooperative tool chains required to analyze the performance of a wireless system by simulation.
We show how this framework can support a detailed and largely automated analysis of a complicated,
networked wireless system using examples from wireless healthcare and video broadcasting.
AADL provides well-defined models of the hardware and software components used in embedded systems.
These models have common standard semantics that are well understood among the research community,
thereby facilitating the correct interpretation of the models.
Our current analysis does not make use of all the predefined modeling components (processor, memory, and
device) that AADL provides; we expect that the extensibility of AADL models will enable us to expand the
coverage of our analysis to include specific hardware and software implementations in the future.
3. HARDWARE & SOFTWARE REQUIREMENTS:
HARDWARE REQUIREMENT:
Processor - Pentium –IV
Speed - 1.1 GHz
RAM - 256 MB (min)
Hard Disk - 20 GB
Floppy Drive - 1.44 MB
Key Board - Standard Windows Keyboard
Mouse - Two or Three Button Mouse
Monitor - SVGA
SOFTWARE REQUIREMENTS:
Operating System : Windows XP
Application Server : ASP .NET Web Server
Front End : ASP .NET & C# .NET
Scripts : C# Script.
Database : SQL SERVER 2005
6. SYSTEM DESIGN:
Data Flow Diagram / Use Case Diagram / Flow Diagram
The DFD is also called as bubble chart. It is a simple graphical formalism that can be used to represent a system
in terms of the input data to the system, various processing carried out on these data, and the output data is
generated by the system.
DATAFLOW DIAGRAM:
7. SENDER - II
RECEIVER
(SINK)
IP Address
Browse a
Video File
ROUTER
FIle Transfer
IP Address
Connecting..
Flle Receive
Socket
Connection
Browse a
received path
End
Connecting..
check
no
yes
Start File
Receiving
yes
no
service time and
delay calculated
Detect Congestion
File Received
File Not
Received
check port
#?
yes
FIle Transfer
Failure
no
packet
failure?
packet reconfiguration
(retansmission)
SENDER - I
IP Address
Browse a
Video File
FIle Transfer
Connecting..
check port
#?
yes
no
FIle Transfer
Failure
9. ACTIVITY DIAGRAM:
RECEIVER
Select a
Receiving Path
Connecting..
Browse
VIDEO
FILE RECEIVE
IP Address
Browse a
Video File
NO
Yes
Connecting..
socket
coneection
TRANSACTION
FAILED
ROUTER
IP Address
Client socket
connection
check
NO
File Not
Received
Start File
Receiving
Yes
packet failure?
Yes
Connecting..
Congestion
Detection
packet
reconfiguration
Service Time and
Delay calculated
SENDER I
NO
FILE Receive
FILE
TRANSFER
IP Address
Browse a
Video File
NO
Yes
socket
coneection
TRANSACTION
FAILED
Connecting..
FILE
TRANSFER
SENDER II
10. SEQUENCE DIAGRAM:
SENDER RECEIVER
ROUTER
Socket Connection
Socket Connection
Start File Transfer
Routing
Bytes Received
File Transferred Success
Acknowledgement
File Received
Bytes Transferred
Routing Finish
packet loss
packet retransmit Bytes Received
by packets
11. USE CASE DIAGRAM:
SENDER
RECEIVER
IP Address
Receiving
Path
socket connection
Browse a File
ROUTER
Receive a File
Packet Failure
Packet Resending
Delay and
Service Time
12. SYSTEM STUDY:
FEASIBILITY STUDY
The feasibility of the project is analyzed in this phase and business proposal is put forth with a very
general plan for the project and some cost estimates. During system analysis the feasibility study of the
proposed system is to be carried out. This is to ensure that the proposed system is not a burden to the
company. For feasibility analysis, some understanding of the major requirements for the system is essential.
Three key considerations involved in the feasibility analysis are
ECONOMICAL FEASIBILITY
TECHNICAL FEASIBILITY
SOCIAL FEASIBILITY
ECONOMICAL FEASIBILITY
This study is carried out to check the economic impact that the system will have on the organization. The
amount of fund that the company can pour into the research and development of the system is limited. The
expenditures must be justified. Thus the developed system as well within the budget and this was achieved
because most of the technologies used are freely available. Only the customized products had to be purchased.
TECHNICAL FEASIBILITY
This study is carried out to check the technical feasibility, that is, the technical requirements of the system.
Any system developed must not have a high demand on the available technical resources. This will lead to high
demands on the available technical resources. This will lead to high demands being placed on the client. The
13. developed system must have a modest requirement, as only minimal or null changes are required for
implementing this system.
SOCIAL FEASIBILITY
The aspect of study is to check the level of acceptance of the system by the user. This includes the
process of training the user to use the system efficiently. The user must not feel threatened by the system,
instead must accept it as a necessity. The level of acceptance by the users solely depends on the methods that
are employed to educate the user about the system and to make him familiar with it. His level of confidence
must be raised so that he is also able to make some constructive criticism, which is welcomed, as he is the final
user of the system.
14. SYSTEM TESTING
The purpose of testing is to discover errors. Testing is the process of trying to discover every
conceivable fault or weakness in a work product. It provides a way to check the functionality of components,
sub assemblies, assemblies and/or a finished product It is the process of exercising software with the intent of
ensuring that the
Software system meets its requirements and user expectations and does not fail in an unacceptable manner.
There are various types of test. Each test type addresses a specific testing requirement.
TYPES OF TESTS
Unit testing
Unit testing involves the design of test cases that validate that the internal program logic is functioning
properly, and that program inputs produce valid outputs. All decision branches and internal code flow should be
validated. It is the testing of individual software units of the application .it is done after the completion of an
individual unit before integration. This is a structural testing, that relies on knowledge of its construction and is
invasive. Unit tests perform basic tests at component level and test a specific business process, application,
and/or system configuration. Unit tests ensure that each unique path of a business process performs accurately
to the documented specifications and contains clearly defined inputs and expected results.
Integration testing
Integration tests are designed to test integrated software components to determine if they actually run as
one program. Testing is event driven and is more concerned with the basic outcome of screens or fields.
Integration tests demonstrate that although the components were individually satisfaction, as shown by
successfully unit testing, the combination of components is correct and consistent. Integration testing is
specifically aimed at exposing the problems that arise from the combination of components.
15. Functional test
Functional tests provide systematic demonstrations that functions tested are available as specified by the
business and technical requirements, system documentation, and user manuals.
Functional testing is centered on the following items:
Valid Input : identified classes of valid input must be accepted.
Invalid Input : identified classes of invalid input must be rejected.
Functions : identified functions must be exercised.
Output : identified classes of application outputs must be exercised.
Systems/Procedures: interfacing systems or procedures must be invoked.
Organization and preparation of functional tests is focused on requirements, key functions, or special test
cases. In addition, systematic coverage pertaining to identify Business process flows; data fields, predefined
processes, and successive processes must be considered for testing. Before functional testing is complete,
additional tests are identified and the effective value of current tests is determined.
System Test
System testing ensures that the entire integrated software system meets requirements. It tests a configuration
to ensure known and predictable results. An example of system testing is the configuration oriented system
integration test. System testing is based on process descriptions and flows, emphasizing pre-driven process links
and integration points.
16. White Box Testing
White Box Testing is a testing in which in which the software tester has knowledge of the inner workings,
structure and language of the software, or at least its purpose. It is purpose. It is used to test areas that cannot be
reached from a black box level.
Black Box Testing
Black Box Testing is testing the software without any knowledge of the inner workings, structure or
language of the module being tested. Black box tests, as most other kinds of tests, must be written from a
definitive source document, such as specification or requirements document, such as specification or
requirements document. It is a testing in which the software under test is treated, as a black box .you cannot
“see” into it. The test provides inputs and responds to outputs without considering how the software works.
Unit Testing:
Unit testing is usually conducted as part of a combined code and unit test phase of the software lifecycle,
although it is not uncommon for coding and unit testing to be conducted as two distinct phases.
Test strategy and approach
Field testing will be performed manually and functional tests will be written in detail.
Test objectives
All field entries must work properly.
Pages must be activated from the identified link.
The entry screen, messages and responses must not be delayed.
Features to be tested
Verify that the entries are of the correct format
17. No duplicate entries should be allowed
All links should take the user to the correct page.
6.2 Integration Testing
Software integration testing is the incremental integration testing of two or more integrated software
components on a single platform to produce failures caused by interface defects.
The task of the integration test is to check that components or software applications, e.g. components in
a software system or – one step up – software applications at the company level – interact without error.
Test Results: All the test cases mentioned above passed successfully. No defects encountered.
18. 6.3 Acceptance Testing
User Acceptance Testing is a critical phase of any project and requires significant participation by the
end user. It also ensures that the system meets the functional requirements.
Test Results: All the test cases mentioned above passed successfully. No defects encountered.
Software Environment
Features Of .Net
Microsoft .NET is a set of Microsoft software technologies for rapidly building and integrating
XML Web services, Microsoft Windows-based applications, and Web solutions. The .NET Framework is a
language-neutral platform for writing programs that can easily and securely interoperate. There’s no language
barrier with .NET: there are numerous languages available to the developer including Managed C++, C#, Visual
Basic and Java Script. The .NET framework provides the foundation for components to interact seamlessly,
whether locally or remotely on different platforms. It standardizes common data types and communications
protocols so that components created in different languages can easily interoperate.
“.NET” is also the collective name given to various software components built upon the .NET
platform. These will be both products (Visual Studio.NET and Windows.NET Server, for instance) and services
(like Passport, .NET My Services, and so on).
THE .NET FRAMEWORK
19. The .NET Framework has two main parts:
1. The Common Language Runtime (CLR).
2. A hierarchical set of class libraries.
The CLR is described as the “execution engine” of .NET. It provides the environment within which programs
run. The most important features are
Conversion from a low-level assembler-style language, called Intermediate Language (IL), into
code native to the platform being executed on.
Memory management, notably including garbage collection.
Checking and enforcing security restrictions on the running code.
Loading and executing programs, with version control and other such features.
The following features of the .NET framework are also worth description:
Managed Code
The code that targets .NET, and which contains certain extra Information - “metadata” - to describe
itself. Whilst both managed and unmanaged code can run in the runtime, only managed code contains the
information that allows the CLR to guarantee, for instance, safe execution and interoperability.
Managed Data
With Managed Code comes Managed Data. CLR provides memory allocation and Deal location
facilities, and garbage collection. Some .NET languages use Managed Data by default, such as C#, Visual
Basic.NET and JScript.NET, whereas others, namely C++, do not. Targeting CLR can, depending on the
language you’re using, impose certain constraints on the features available. As with managed and unmanaged
20. code, one can have both managed and unmanaged data in .NET applications - data that doesn’t get garbage
collected but instead is looked after by unmanaged code.
Common Type System
The CLR uses something called the Common Type System (CTS) to strictly enforce type-safety. This
ensures that all classes are compatible with each other, by describing types in a common way. CTS define how
types work within the runtime, which enables types in one language to interoperate with types in another
language, including cross-language exception handling. As well as ensuring that types are only used in
appropriate ways, the runtime also ensures that code doesn’t attempt to access memory that hasn’t been
allocated to it.
Common Language Specification
The CLR provides built-in support for language interoperability. To ensure that you can develop
managed code that can be fully used by developers using any programming language, a set of language features
and rules for using them called the Common Language Specification (CLS) has been defined. Components that
follow these rules and expose only CLS features are considered CLS-compliant.
THE CLASS LIBRARY
.NET provides a single-rooted hierarchy of classes, containing over 7000 types. The root of the
namespace is called System; this contains basic types like Byte, Double, Boolean, and String, as well as Object.
All objects derive from System. Object. As well as objects, there are value types. Value types can be allocated
on the stack, which can provide useful flexibility. There are also efficient means of converting value types to
object types if and when necessary.
The set of classes is pretty comprehensive, providing collections, file, screen, and network I/O,
threading, and so on, as well as XML and database connectivity.
The class library is subdivided into a number of sets (or namespaces), each providing distinct
areas of functionality, with dependencies between the namespaces kept to a minimum.
21. LANGUAGES SUPPORTED BY .NET
The multi-language capability of the .NET Framework and Visual Studio .NET enables developers to
use their existing programming skills to build all types of applications and XML Web services. The .NET
framework supports new versions of Microsoft’s old favorites Visual Basic and C++ (as VB.NET and Managed
C++), but there are also a number of new additions to the family.
Visual Basic .NET has been updated to include many new and improved language features that
make it a powerful object-oriented programming language. These features include inheritance, interfaces, and
overloading, among others. Visual Basic also now supports structured exception handling, custom attributes and
also supports multi-threading.
Visual Basic .NET is also CLS compliant, which means that any CLS-compliant language can
use the classes, objects, and components you create in Visual Basic .NET.
Managed Extensions for C++ and attributed programming are just some of the enhancements
made to the C++ language. Managed Extensions simplify the task of migrating existing C++ applications to the
new .NET Framework.
C# is Microsoft’s new language. It’s a C-style language that is essentially “C++ for Rapid
Application Development”. Unlike other languages, its specification is just the grammar of the language. It has
no standard library of its own, and instead has been designed with the intention of using the .NET libraries as its
own.
Microsoft Visual J# .NET provides the easiest transition for Java-language developers into the world of
XML Web Services and dramatically improves the interoperability of Java-language programs with existing
software written in a variety of other programming languages.
22. Active State has created Visual Perl and Visual Python, which enable .NET-aware applications to be
built in either Perl or Python. Both products can be integrated into the Visual Studio .NET environment. Visual
Perl includes support for Active State’s Perl Dev Kit.
Other languages for which .NET compilers are available include
FORTRAN
COBOL
Eiffel
Fig1 .Net Framework
ASP.NET
XML WEB SERVICES
Windows Forms
Base Class Libraries
Common Language Runtime
Operating System
C#.NET is also compliant with CLS (Common Language Specification) and supports structured exception
handling. CLS is set of rules and constructs that are supported by the CLR (Common Language Runtime).
CLR is the runtime environment provided by the .NET Framework; it manages the execution of the code
and also makes the development process easier by providing services.
C#.NET is a CLS-compliant language. Any objects, classes, or components that created in C#.NET can be
used in any other CLS-compliant language. In addition, we can use objects, classes, and components
23. created in other CLS-compliant languages in C#.NET .The use of CLS ensures complete interoperability
among applications, regardless of the languages used to create the application.
CONSTRUCTORS AND DESTRUCTORS:
Constructors are used to initialize objects, whereas destructors are used to destroy them. In other
words, destructors are used to release the resources allocated to the object. In C#.NET the sub finalize
procedure is available. The sub finalize procedure is used to complete the tasks that must be performed
when an object is destroyed. The sub finalize procedure is called automatically when an object is
destroyed. In addition, the sub finalize procedure can be called only from the class it belongs to or from
derived classes.
GARBAGE COLLECTION
Garbage Collection is another new feature in C#.NET. The .NET Framework monitors allocated resources,
such as objects and variables. In addition, the .NET Framework automatically releases memory for reuse by
destroying objects that are no longer in use.
In C#.NET, the garbage collector checks for the objects that are not currently in use by applications. When
the garbage collector comes across an object that is marked for garbage collection, it releases the memory
occupied by the object.
OVERLOADING
Overloading is another feature in C#. Overloading enables us to define multiple procedures with the same
name, where each procedure has a different set of arguments. Besides using overloading for procedures,
we can use it for constructors and properties in a class.
MULTITHREADING:
C#.NET also supports multithreading. An application that supports multithreading can handle multiple
tasks simultaneously, we can use multithreading to decrease the time taken by an application to respond
to user interaction.
STRUCTURED EXCEPTION HANDLING
24. C#.NET supports structured handling, which enables us to detect and remove errors at runtime.
In C#.NET, we need to use Try…Catch…Finally statements to create exception handlers. Using
Try…Catch…Finally statements, we can create robust and effective exception handlers to improve the
performance of our application.
THE .NET FRAMEWORK
The .NET Framework is a new computing platform that simplifies application development in the highly
distributed environment of the Internet.
OBJECTIVES OF. NET FRAMEWORK
1. To provide a consistent object-oriented programming environment whether object codes is stored and
executed locally on Internet-distributed, or executed remotely.
2. To provide a code-execution environment to minimizes software deployment and guarantees safe
execution of code.
3. Eliminates the performance problems.
There are different types of application, such as Windows-based applications and Web-based applications.
4.3 Features of SQL-SERVER
The OLAP Services feature available in SQL Server version 7.0 is now called SQL Server 2000
Analysis Services. The term OLAP Services has been replaced with the term Analysis Services. Analysis
Services also includes a new data mining component. The Repository component available in SQL Server
version 7.0 is now called Microsoft SQL Server 2000 Meta Data Services. References to the component now
use the term Meta Data Services. The term repository is used only in reference to the repository engine within
Meta Data Services
SQL-SERVER database consist of six type of objects,
They are,
1. TABLE
25. 2. QUERY
3. FORM
4. REPORT
5. MACRO
TABLE:
A database is a collection of data about a specific topic.
VIEWS OF TABLE:
We can work with a table in two types,
1. Design View
2. Datasheet View
Design View
To build or modify the structure of a table we work in the table design view. We can
specify what kind of data will be hold.
Datasheet View
To add, edit or analyses the data itself we work in tables datasheet view mode.
26. QUERY:
A query is a question that has to be asked the data. Access gathers data that answers the question from
one or more table. The data that make up the answer is either dynaset (if you edit it) or a snapshot (it cannot be
edited).Each time we run query, we get latest information in the dynaset. Access either displays the dynaset or
snapshot for us to view or perform an action on it, such as deleting or updating.
27. SAMPLE CODE:
namespace ServerSource1
{
partial class Form1
{
/// <summary>
/// Required designer variable.
/// </summary>
private System.ComponentModel.IContainer components = null;
/// <summary>
/// Clean up any resources being used.
/// </summary>
/// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
protected override void Dispose(bool disposing)
{
if (disposing && (components != null))
{
components.Dispose();
}
base.Dispose(disposing);
}
#region Windows Form Designer generated code
28. /// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InitializeComponent()
{
this.openFileDialog1 = new System.Windows.Forms.OpenFileDialog();
this.openFileDialog2 = new System.Windows.Forms.OpenFileDialog();
this.panel2 = new System.Windows.Forms.Panel();
this.groupBox3 = new System.Windows.Forms.GroupBox();
this.groupBox2 = new System.Windows.Forms.GroupBox();
this.label3 = new System.Windows.Forms.Label();
this.txtIp = new System.Windows.Forms.TextBox();
this.groupBox1 = new System.Windows.Forms.GroupBox();
this.pictureBox3 = new System.Windows.Forms.PictureBox();
this.pictureBox4 = new System.Windows.Forms.PictureBox();
this.pictureBox5 = new System.Windows.Forms.PictureBox();
this.button2 = new System.Windows.Forms.Button();
this.label2 = new System.Windows.Forms.Label();
this.textBox2 = new System.Windows.Forms.TextBox();
this.label4 = new System.Windows.Forms.Label();
this.label1 = new System.Windows.Forms.Label();
this.pictureBox6 = new System.Windows.Forms.PictureBox();
this.lblError = new System.Windows.Forms.Label();
this.panel2.SuspendLayout();
78. catch (Exception ex)
{
if (ex.Message == "A connection attempt failed because the connected party did not properly respond
after a period of time, or established connection failed because connected host has failed to respond")
{
MessageBox.Show("No Such System Available Try other IP");
}
else
{
if (ex.Message == "No connection could be made because the target machine actively refused it")
{
MessageBox.Show("File Sending fail. Because Client not running.");
}
else
{
MessageBox.Show("File Sending fail." + ex.Message);
}
}
}
}
public void send1()
{
try
{
IPAddress[] ipAddress = Dns.GetHostAddresses(txtIp.Text);
IPEndPoint ipEnd1 = new IPEndPoint(ipAddress[0], 5654);
Socket clientSock1 = new Socket(AddressFamily.InterNetwork, SocketType.Stream,
ProtocolType.IP);
clientSock1.Connect(ipEnd1);
79. //clientSock.Send(ReceiverCode.send );
clientSock1.Send(ReceiverCode1.send1);
System.Threading.Thread.Sleep(1000);
clientSock1.Close();
}
catch (Exception ex)
{
if (ex.Message == "A connection attempt failed because the connected party did not properly respond
after a period of time, or established connection failed because connected host has failed to respond")
{
MessageBox.Show("No Such System Available Try other IP");
}
else
{
if (ex.Message == "No connection could be made because the target machine actively refused it")
{
MessageBox.Show("File Sending fail. Because Client not running.");
}
else
{
MessageBox.Show("File Sending fail." + ex.Message);
}
}
}
}
//CHART
private void pictureBox70_Click(object sender, EventArgs e)
{
//Routing();
85. CONCLUSION:
We proposed a model-based description and analysis framework for the design of wireless system architectures.
Using AADL, the de facto standard formal architecture description language, we have demonstrated how a high
level of modularity can be achieved in simulated wireless network systems. This approach also allows tool
chains for analyzing the performance of wireless systems to be formally derived from the simulated behavior of
the system. By examining example applications of time critical wireless networked systems to healthcare and
video broadcasting services, we showed that our framework can support detailed and largely automated analysis
of complicated networked wireless systems.
86. REFERENCES:
[1] OPNET Technologies, http://www.opnet.com, 2012.
[2] C. Atici and M.O. Sunay, “High Data-Rate Video Broadcasting over 3G Wireless Systems,” IEEE Trans.
Broadcasting, vol. 53, no. 1, pp. 212-223, Mar. 2007.
[3] N.H. Vaidya, J. Bernhard, V.V. Veeravalli, P.R. Kumar, and R.K.Iyer, “Illinois Wireless Wind Tunnel: A
Testbed for Experimental Evaluation of Wireless Networks,” Proc. ACM SIGCOMM Workshop Experimental
Approaches to Wireless Network Design and Analysis, pp. 64-69, Aug. 2005.
[4] W.J. Jeon, K. Kang, R.H. Campbell, and K. Nahrstedt, “Simulation Framework and Performance Analysis
of Multimedia Broadcasting Service over Wireless Networks,” Proc. Int’l Conf. Distributed Systems (ICDCS
’09), pp. 93-100, June 2009.
[5] N. Medvidovic and R.N. Taylor, “A Classification and Comparison Framework for Software Architecture
Descripton Languages,” IEEE Trans. Software Eng., vol. 26, no. 1, pp. 70-93, Jan.
2000.
[6] SAE International, Standard AS 5506, Architecture Analysis and Design Language (AADL), SAE, Nov.
2004.
[7] P.H. Feiler, B. Lewis, and S. Vestal, “The SAE Architecture Analysis & Design Language (AADL) A
Standard for Engineering Performance Critical Systems,” Proc. IEEE Int’l Symp. Intelligent Control (ISIC ’06),
pp. 1206-1211, Oct. 2006.
[8] N. Bhushan, C. Lott, P. Black, R. Attar, Y.-C. Jou, M. Fan, D. Ghosh, and J. Au, “CDMA2000 1xEV-DO
Revision A: A Physical Layer and MAC Layer Overview,” IEEE Comm. Magazine, vol. 44, no. 2, pp. 37-49,
Feb. 2006.
[9] D.R. Pauluzzi and N.C. Beaulieu, “A Comparison of SNR Estimation Techniques for the AWGN Channel,”
IEEE Trans. Comm., vol. 48, no. 10, pp. 1681-1691, Oct. 2000.
87. [10] A. Konrad, B.Y. Zhao, A.D. Joseph, and R. Ludwig, “A Markov- Based Channel Model Algorithm for
Wireless Networks,” ACM Wireless Networks, vol. 9, no. 3, pp. 189-199, May 2003.
[11] S.A. Khayam and H. Radha, “Constant-Complexity Models for Wireless Channels,” Proc. IEEE
INFOCOM, pp. 1-11, Apr. 2006.
[12] J. Daemen and V. Rijmen, The Design of Rijndael: AES – The Advanced Encryption Standard. Springer-
Verlag, 2002.
[13] W.J. Ebel and W.H. Tranter, “The Performance of Reed-Solomon Codes on a Bursty-Noise Channel,”
IEEE Trans. Comm., vol. 43, no. 234, pp. 298-306, Feb.-Apr. 1995.
[14] K. Kang, Y. Cho, and H. Shin, “Energy-Efficient MAC-Layer Error Recovery for Mobile Multimedia
Applications in 3GPP2 BCMCS,” IEEE Trans. Broadcasting, vol. 53, no. 1, pp. 338-349, Mar. 2007.
[15] K. Kang and L. Sha, “An Interleaving Structure for Guaranteed QoS in Real-Time Broadcasting Systems,”
IEEE Trans. Computers, vol. 59, no. 5, pp. 666-678, May 2010.