This document provides safety information for a 2K-Plastic-Grundierfiller product. It contains hazardous chemicals including xylene, ethyl acetate, and solvent naphtha. The product is highly flammable and harmful if inhaled, in contact with skin, or if swallowed. It can cause irritation to eyes, skin, and respiratory tract. In the event of contact, remove contaminated clothing and rinse area with water. Seek medical help if symptoms persist. The product requires proper storage and handling to prevent fire or exposure.
Prakash Chemicals International offers toluene diisocyanate chemical at affordable prices. To know more about toluene diisocyanate products. Visit our website today.
As said earlier, Gypsum occurs along with other minerals such as halite and anhydrite. These all are the evaporite minerals, and hence the gypsum. It means that Gypsum is the sedimentary deposit, that is to say, it is deposited by the action or the work of wind or the water, usually in the bottom of the water body. In particular, Sulfate is deposited from the natural brine that occurs in the ocean, which is then followed by anhydrite and halite
Novus have several options for testing of smoke via Smoke Detector Testers in UAE and KSA. We offer solo A5 aerosol spray and heat detector testing equipment.
Novus have several options for testing of smoke via Smoke Detector Testers in UAE and KSA. We offer solo A5 aerosol spray and heat detector testing equipment.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
What Is Recruitment Processing Outsourcing (RPO) Services?Impeccable HR
Impeccable HR provides a wide range of RPO services for your bulk hiring needs within a stipulated period. They meticulously build RPO solutions to improve your recruitment process. RPO services are great for budget-conscious recruiters who want high-quality personnel.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
Msds 2 k plastic-grundierfiller-gb
1. Page 1/9
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 12.01.2011 Version number 47 Revision: 12.01.2011
* 1 Identification of the substance/mixture and of the company/undertaking
· Product identifier
· Trade name: 2K-Plastic-Grundierfiller
· Relevant identified uses of the substance or mixture and uses advised against
· Application of the substance / the preparation Priming
· Details of the supplier of the safety data sheet
· Manufacturer/Supplier:
MIPA AG
Am Oberen Moos 1
D-84051 Essenbach
Tel.: +49(0)8703-922-0
Fax.: +49(0)8703-922-100
e-mail: sdb-registratur@mipa-paints.com
www.mipa-paints.com
· Further information obtainable from: Laboratory
· Emergency telephone number: +49(0)700 24112112 (MIP)
* 2 Hazards identification
· Classification of the substance or mixture
· Classification according to Directive 67/548/EEC or Directive 1999/45/EC
Xn; Harmful
R20/21: Harmful by inhalation and in contact with skin.
Xi; Irritant
R36/38: Irritating to eyes and skin.
F; Highly flammable
R11: Highly flammable.
R52/53: Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
· Information concerning particular hazards for human and environment:
The product has to be labelled due to the calculation procedure of the "General Classification guideline for
preparations of the EU" in the latest valid version.
· Classification system:
The classification is according to the latest editions of the EU-lists, and extended by company and literature
data.
· Label elements
· Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous
Materials.
· Code letter and hazard designation of product:
Xn Harmful
F Highly flammable
· Hazard-determining components of labelling:
xylene
· Risk phrases:
11 Highly flammable.
20/21 Harmful by inhalation and in contact with skin.
36/38 Irritating to eyes and skin.
52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
(Contd. on page 2)
GB
DR
2. Page 2/9
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 12.01.2011 Version number 47 Revision: 12.01.2011
Trade name: 2K-Plastic-Grundierfiller
(Contd. of page 1)
· Safety phrases:
2 Keep out of the reach of children.
9 Keep container in a well-ventilated place.
13 Keep away from food, drink and animal feedingstuffs.
16 Keep away from sources of ignition - No smoking.
36/37 Wear suitable protective clothing and gloves.
46 If swallowed, seek medical advice immediately and show this container or label.
· Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
* 3 Composition/information on ingredients
· Chemical characterization: Mixtures
· Description: Mixture of substances listed below with nonhazardous additions.
· Dangerous components:
CAS: 1330-20-7 xylene 10-25%
EINECS: 215-535-7 Xn R20/21; Xi R38
R10
Flam. Liq. 3, H226; Acute Tox. 4, H312; Acute Tox. 4, H332; Skin
Irrit. 2, H315
CAS: 141-78-6 ethyl acetate 10-25%
EINECS: 205-500-4 Xi R36; F R11
R66-67
Flam. Liq. 2, H225; Eye Irrit. 2, H319; STOT SE 3, H336
CAS: 123-42-2 4-hydroxy-4-methylpentan-2-one 10-25%
EINECS: 204-626-7 Xi R36
Eye Irrit. 2, H319
CAS: 64742-95-6 Solvent naphtha (petroleum), light arom. 2.5-10%
EINECS: 265-199-0 Xn R65; Xi R37; N R51/53
R10-66-67
Flam. Liq. 3, H226; Asp. Tox. 1, H304; Aquatic Chronic 2,
H411; STOT SE 3, H335+H336
CAS: 108-65-6 2-methoxy-1-methylethyl acetate 2.5-10%
EINECS: 203-603-9 Xi R36
R10
Flam. Liq. 3, H226; Eye Irrit. 2, H319
CAS: 64742-48-9 Naphtha (petroleum), hydrotreated heavy, benzene content < 0,1% 2.5-10%
EINECS: 265-150-3 Xn R65
R10-66
Flam. Liq. 3, H226; Asp. Tox. 1, H304
CAS: 95-63-6 1,2,4-trimethylbenzene 2.5-10%
EINECS: 202-436-9 Xn R20; Xi R36/37/38; N R51/53
R10
Flam. Liq. 3, H226; Aquatic Chronic 2, H411; Acute Tox. 4,
H332; Skin Irrit. 2, H315; Eye Irrit. 2, H319; STOT SE 3, H335
(Contd. on page 3)
GB
DR
3. Page 3/9
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 12.01.2011 Version number 47 Revision: 12.01.2011
Trade name: 2K-Plastic-Grundierfiller
(Contd. of page 2)
CAS: 123-86-4 n-butyl acetate 2.5-10%
EINECS: 204-658-1 R10-66-67
Flam. Liq. 3, H226; STOT SE 3, H336
CAS: 98-82-8 cumene ≤ 1.0%
EINECS: 202-704-5 Xn R65; Xi R37; N R51/53
R10
Flam. Liq. 3, H226; Asp. Tox. 1, H304; Aquatic Chronic 2,
H411; STOT SE 3, H335
CAS: 108-90-7 chlorobenzene ≤ 1.0%
EINECS: 203-628-5 Xn R20; N R51/53
R10
Flam. Liq. 3, H226; Aquatic Chronic 2, H411; Acute Tox. 4,
H332
· Additional information: For the wording of the listed risk phrases refer to section 16.
* 4 First aid measures
· Description of first aid measures
· General information:
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48
hours after the accident.
· After inhalation:
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms
persist.
In case of unconsciousness place patient stably in side position for transportation.
· After skin contact: Immediately wash with water and soap and rinse thoroughly.
· After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
· After swallowing: If symptoms persist consult doctor.
· Information for doctor:
· Most important symptoms and effects, both acute and delayed No further relevant information available.
· Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Firefighting measures
· Extinguishing media
· Suitable extinguishing agents: CO2, sand, extinguishing powder. Do not use water.
· For safety reasons unsuitable extinguishing agents: Water with full jet
· Special hazards arising from the substance or mixture No further relevant information available.
· Advice for firefighters
· Protective equipment: Mouth respiratory protective device.
* 6 Accidental release measures
· Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
· Environmental precautions:
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
· Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
(Contd. on page 4)
GB
DR
4. Page 4/9
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 12.01.2011 Version number 47 Revision: 12.01.2011
Trade name: 2K-Plastic-Grundierfiller
(Contd. of page 3)
Ensure adequate ventilation.
Do not flush with water or aqueous cleansing agents
· Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
* 7 Handling and storage
· Handling:
· Precautions for safe handling
Keep away from heat and direct sunlight.
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
· Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
· Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles: Store in a cool location.
· Information about storage in one common storage facility: Store away from foodstuffs.
· Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
· Storage class: 3
· Specific end use(s) No further relevant information available.
* 8 Exposure controls/personal protection
· Additional information about design of technical facilities: No further data; see item 7.
· Control parameters
· Ingredients with limit values that require monitoring at the workplace:
1330-20-7 xylene
WEL Short-term value: 441 mg/m³, 100 ppm
Long-term value: 220 mg/m³, 50 ppm
Sk; BMGV
141-78-6 ethyl acetate
WEL Short-term value: 400 ppm
Long-term value: 200 ppm
123-42-2 4-hydroxy-4-methylpentan-2-one
WEL Short-term value: 362 mg/m³, 75 ppm
Long-term value: 241 mg/m³, 50 ppm
108-65-6 2-methoxy-1-methylethyl acetate
WEL Short-term value: 548 mg/m³, 100 ppm
Long-term value: 274 mg/m³, 50 ppm
Sk
95-63-6 1,2,4-trimethylbenzene
WEL Long-term value: 125 mg/m³, 25 ppm
ILV
(Contd. on page 5)
GB
DR
5. Page 5/9
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 12.01.2011 Version number 47 Revision: 12.01.2011
Trade name: 2K-Plastic-Grundierfiller
(Contd. of page 4)
123-86-4 n-butyl acetate
WEL Short-term value: 966 mg/m³, 200 ppm
Long-term value: 724 mg/m³, 150 ppm
· Additional information: The lists valid during the making were used as basis.
· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Do not inhale gases / fumes / aerosols.
Avoid contact with the eyes and skin.
· Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use self-contained respiratory protective device.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the
resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the
application.
· Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
· Eye protection:
Tightly sealed goggles
* 9 Physical and chemical properties
· Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Fluid
Colour: According to product specification
· Odour: Characteristic
· Odour threshold: Not determined.
· pH-value: Not determined.
· Change in condition
Melting point/Melting range: Undetermined.
(Contd. on page 6)
GB
DR
6. Page 6/9
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 12.01.2011 Version number 47 Revision: 12.01.2011
Trade name: 2K-Plastic-Grundierfiller
(Contd. of page 5)
Boiling point/Boiling range: 77°C
· Flash point: 17°C (DIN 53213)
· Ignition temperature: 350°C (DIN 51794)
· Decomposition temperature: Not determined.
· Self-igniting: Product is not selfigniting.
· Danger of explosion: Product is not explosive. However, formation of explosive air/
vapour mixtures are possible.
· Explosion limits:
Lower: 1.1 Vol %
Upper: 11.5 Vol %
· Vapour pressure at 20°C: 97 hPa
· Density at 20°C: 1.068 g/cm³ (DIN 53217)
· Relative density Not determined.
· Vapour density Not determined.
· Evaporation rate Not determined.
· Solubility in / Miscibility with
water: Not miscible or difficult to mix.
· Segregation coefficient (n-octanol/water): Not determined.
· Viscosity:
Dynamic: Not determined.
Kinematic at 20°C: 65 s (DIN 53211/4)
· Solvent content:
Organic solvents: 66.2 %
VOC (EC) 706.1 g/l
Solids content (weight-%): 33.8 %
· Other information No further relevant information available.
* 10 Stability and reactivity
· Reactivity
· Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
· Possibility of hazardous reactions No dangerous reactions known.
· Conditions to avoid No further relevant information available.
· Incompatible materials: No further relevant information available.
· Hazardous decomposition products: Carbon monoxide
* 11 Toxicological information
· Information on toxicological effects
· Acute toxicity:
· LD/LC50 values relevant for classification:
1330-20-7 xylene
Oral LD50 4300 mg/kg (rat)
(Contd. on page 7)
GB
DR
7. Page 7/9
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 12.01.2011 Version number 47 Revision: 12.01.2011
Trade name: 2K-Plastic-Grundierfiller
(Contd. of page 6)
64742-95-6 Solvent naphtha (petroleum), light arom.
Oral LD50 >6800 mg/kg (rat)
Dermal LD50 >3400 mg/kg (rab)
Inhalative LC50/4 h >10.2 mg/l (rat)
95-63-6 1,2,4-trimethylbenzene
Oral LD50 5000 mg/kg (rat)
· Primary irritant effect:
· on the skin: Irritant to skin and mucous membranes.
· on the eye: Irritating effect.
· Sensitization: No sensitizing effects known.
· Additional toxicological information:
The product shows the following dangers according to the calculation method of the General EU
Classification Guidelines for Preparations as issued in the latest version:
Harmful
Irritant
* 12 Ecological information
· Toxicity
· Acquatic toxicity: No further relevant information available.
· Persistence and degradability No further relevant information available.
· Behaviour in environmental systems:
· Bioaccumulative potential No further relevant information available.
· Mobility in soil No further relevant information available.
· Ecotoxical effects:
· Remark: Harmful to fish
· Additional ecological information:
· General notes:
Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
Harmful to aquatic organisms
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Other adverse effects No further relevant information available.
13 Disposal considerations
· Waste treatment methods
· Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
· European waste catalogue
08 01 11* waste paint and varnish containing organic solvents or other dangerous substances
· Uncleaned packaging:
· Recommendation: Disposal must be made according to official regulations.
GB
(Contd. on page 8)
DR
8. Page 8/9
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 12.01.2011 Version number 47 Revision: 12.01.2011
Trade name: 2K-Plastic-Grundierfiller
(Contd. of page 7)
* 14 Transport information
· Land transport ADR/RID (cross-border)
· ADR/RID class: 3 (F1) Flammable liquids.
· Danger code (Kemler): 33
· UN-Number: 1263
· Packaging group: II
· Hazard label: 3
· UN proper shipping name: 1263 PAINT, special provision 640D
· Tunnel restriction code D/E
· Maritime transport IMDG:
· IMDG Class: 3
· UN Number: 1263
· Label 3
· Packaging group: II
· EMS Number: F-E,S-E
· Marine pollutant: No
· Segregation groups Liquid halogenated hydrocarbons
· Proper shipping name: PAINT
· Air transport ICAO-TI and IATA-DGR:
· ICAO/IATA Class: 3
· UN/ID Number: 1263
· Label 3
· Packaging group: II
· Proper shipping name: PAINT
· Special precautions for user Warning: Flammable liquids.
· Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code Not applicable.
* 15 Regulatory information
· Safety, health and environmental regulations/legislation specific for the substance or mixture
· National regulations:
· Information about limitation of use:
13463-67-7 titanium dioxide 3A
14807-96-6 Talk 3B
1344-28-1 aluminium oxide 2
100-41-4 Ethylbenzene 3A
64-17-5 ethanol 5
(Contd. on page 9)
GB
DR
9. Page 9/9
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 12.01.2011 Version number 47 Revision: 12.01.2011
Trade name: 2K-Plastic-Grundierfiller
(Contd. of page 8)
14808-60-7 Quartz (SiO2) 1
Class Share in %
NK 50-100
· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
* 16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
· Relevant phrases
H225 Highly flammable liquid and vapour.
H226 Flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H312 Harmful in contact with skin.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
R10 Flammable.
R11 Highly flammable.
R20 Harmful by inhalation.
R20/21 Harmful by inhalation and in contact with skin.
R36 Irritating to eyes.
R36/37/38 Irritating to eyes, respiratory system and skin.
R37 Irritating to respiratory system.
R38 Irritating to skin.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R65 Harmful: may cause lung damage if swallowed.
R66 Repeated exposure may cause skin dryness or cracking.
R67 Vapours may cause drowsiness and dizziness.
· Department issuing MSDS: MIPA AG, Abteilung Umweltschutz
· Contact: Michaela Knall
· * Data compared to the previous version altered.
GB
DR