Next Industries' miniOMNIAlog datalogger, with different radio interfaces, cloud data storage, sms/email alarms, vibrating wire, 4..20mA, 0-10V, NTC, Thermocouples, and Modbus sensors, other than a low power requirements make this four channel datalogger the perfect choice for unattended data monitoring in remote places.
It contains construction, working, and result analysis of smart irrigation based on Lora WAN technology. And also it analyses the battery performance in different cased and area of coverage by using Lora WAN
It contains construction, working, and result analysis of smart irrigation based on Lora WAN technology. And also it analyses the battery performance in different cased and area of coverage by using Lora WAN
Home security system is needed for convenience and safety. This system invented to keep home safe from intruder. In this work, we present the design and implementation of a GSM & PIR sensor based home security system using ARDUINO-UNO board. Which take a very less power. The system is a arduino-uno based home security system which contains a GSM modem and PIR sensor with servo-motor and a camera which provides a better security. The system can response rapidly as intruder enters into the trigged zone, PIR sensor sense the object and GSM module will send a notification as a SMS to the registered number of the home owner, and can also give a snapshot of that object. This security system for alerting a house owner wherever he will. In this system as a object enters into the zone GSM module produce a signal through a public telecom network and sends a message or redirect a call that that tells about your home update or predefined message which is embedded in arduino-uno board. Suspected activities are conveyed to remote user through SMS or Call using GSM technology.
IoT in Mining for Sensing, Monitoring and Prediction of Underground Mines Roo...Ankit Singh
IEEE Paper Link: https://ieeexplore.ieee.org/abstract/document/8389041/
Presentation of the the paper in the fourth 4th IEEE International Conference on Recent Advances in Information Technology
Digital Catapult Centre Brighton - Nigel Devenishwired_sussex
At The Digital Catapult Centre Brighton event, Tech Beyond The Screen: Connectivity & Infrastructure on Wednesday 2nd March, Nigel Devenish talked about his work with Trak365.
The best way to efficient maintaining and securing your business operation is through monitoring.
Constantly checking your essential equipment is always been ways to prevent failure and unexpected break down however due to fast changing society manual monitoring is already out of league.
Linkwise developed it’s solution for this dilemma, in order to make an efficient, cost-effective and reliable monitoring system that is capable to send a critical alarm via SMS text message and Email.
For more information visit us at https://linkwisetech.com/products-2/facility-monitoring-system/ or www.linkwisetech.com
ARM based System for Monitoring Grain ConditionAM Publications
Agriculture is the backbone of any nation’s economy and there is a dependency between agricultural growth and economic prosperity. As India is an Agriculture country where 70% of the population depends on farming, the storage of grains plays a crucial role in national economy. Due to the seasonality of grain production, the storage of grain is the top priority task for restoring and reusing. In the process of grain storage, temperature, humidity and carbon dioxide concentration (CO2) are major ecological factors that can influence directly on the quality of the Grain. Hence, there is a necessity to monitor the vital parameters continuously during storage and communicate the status to the manger in real time which becomes a challenging. The traditional methods are limited to simple manual temperature and humidity testing which are relatively backward since grain situation analysis are made without any effective means of processing and regulation hence there is a need for smart grain management system with automation which can also avoid hidden security risks. The Real-time monitoring of the grain storage system is designed based on ARM7 and using GSM module as lower level Control unit which improves the level of grains storage and reduce the grain losses during storage procedure and also reduce man power and labor intensity.
IP-PDU is the latest scientific achievement of UPCOM after many years of dedicated research. On the trend of future power distribution management technology development, combining the technology requirement of the modern data center application environment, adopting key technology with fully independent intellectual property, the product is designed in combination of network communication, power distribution and network management and hot swappable technology.
FINAL YEAR SEMINAR ON PROJECT OF "GSM BASED INDUSTRIAL MACHINE CONTROL" PRESENTED BY DNYANESHWAR BHAGWAT,AJAY BHOSALE,PRASHANT BODHE,NIKHIL GAIKWAD... FROM KBP,SATARA
8310 Datalogger - 8310-N Series with Enclosureswebadminjk
The 8310 uses low-power circuitry to achieve long-life battery operation
and provide a rugged system for unattended field operation in extreme
environments
The project "STREET LIGHT MONITORING AND CONTROL SYSTEM" is developed for automatic
street lights maintenance and to reduce power consumption. The application is designed in such a way that we
place light sensors in all street light circuits, which is responsible to switch on and off automatically. once the
lights are switched on current sensors placed at every street light circuits are responsible to report problem status
to the centralized system with help of GSM module attached with the circuit. The status is available in the
centralized system, the work man now can easily locate the particular light to take care which minimizes the time
to search it and repair. The system also maintains database to store useful information from each street light like
power consumption, total number of burning hours, total number of interruptions, tally the actual power
consumption with the power supplied and details of fault detection. Hence maintaining the system with optimal
power consumption giving commercial benefits to business and the prosperity of the city as a whole.
.Keywords: current sensor, GSM, Light Dependant Resistor [LDR], microcontroller
This presentation is based on the controlling of home appliances using simple commands. The key components are a SIM 300 GSM module, an Arduino UNO board and a 4 channel 12 volt relay.
suppose this security system is fitted in your car . If a thief breaks in and tries to drive away your car then he/she have enter the code for ignition .If the code mismatches then it will send a message to the proprietor's cell "security breach".By this we will come to know that someone is trying to steal your car.
"THAT IS THE IDEA OF THE PROJECT"
low cost housing, its not yet finnished. See we are facing a crisis of accomodation hence lack of employment but if we implement this project in lowly developed areas if Zimbabwe like Masvingo, it can create employment, attract invetors from outside the country, even bring big companies to establish in this nation.
Home security system is needed for convenience and safety. This system invented to keep home safe from intruder. In this work, we present the design and implementation of a GSM & PIR sensor based home security system using ARDUINO-UNO board. Which take a very less power. The system is a arduino-uno based home security system which contains a GSM modem and PIR sensor with servo-motor and a camera which provides a better security. The system can response rapidly as intruder enters into the trigged zone, PIR sensor sense the object and GSM module will send a notification as a SMS to the registered number of the home owner, and can also give a snapshot of that object. This security system for alerting a house owner wherever he will. In this system as a object enters into the zone GSM module produce a signal through a public telecom network and sends a message or redirect a call that that tells about your home update or predefined message which is embedded in arduino-uno board. Suspected activities are conveyed to remote user through SMS or Call using GSM technology.
IoT in Mining for Sensing, Monitoring and Prediction of Underground Mines Roo...Ankit Singh
IEEE Paper Link: https://ieeexplore.ieee.org/abstract/document/8389041/
Presentation of the the paper in the fourth 4th IEEE International Conference on Recent Advances in Information Technology
Digital Catapult Centre Brighton - Nigel Devenishwired_sussex
At The Digital Catapult Centre Brighton event, Tech Beyond The Screen: Connectivity & Infrastructure on Wednesday 2nd March, Nigel Devenish talked about his work with Trak365.
The best way to efficient maintaining and securing your business operation is through monitoring.
Constantly checking your essential equipment is always been ways to prevent failure and unexpected break down however due to fast changing society manual monitoring is already out of league.
Linkwise developed it’s solution for this dilemma, in order to make an efficient, cost-effective and reliable monitoring system that is capable to send a critical alarm via SMS text message and Email.
For more information visit us at https://linkwisetech.com/products-2/facility-monitoring-system/ or www.linkwisetech.com
ARM based System for Monitoring Grain ConditionAM Publications
Agriculture is the backbone of any nation’s economy and there is a dependency between agricultural growth and economic prosperity. As India is an Agriculture country where 70% of the population depends on farming, the storage of grains plays a crucial role in national economy. Due to the seasonality of grain production, the storage of grain is the top priority task for restoring and reusing. In the process of grain storage, temperature, humidity and carbon dioxide concentration (CO2) are major ecological factors that can influence directly on the quality of the Grain. Hence, there is a necessity to monitor the vital parameters continuously during storage and communicate the status to the manger in real time which becomes a challenging. The traditional methods are limited to simple manual temperature and humidity testing which are relatively backward since grain situation analysis are made without any effective means of processing and regulation hence there is a need for smart grain management system with automation which can also avoid hidden security risks. The Real-time monitoring of the grain storage system is designed based on ARM7 and using GSM module as lower level Control unit which improves the level of grains storage and reduce the grain losses during storage procedure and also reduce man power and labor intensity.
IP-PDU is the latest scientific achievement of UPCOM after many years of dedicated research. On the trend of future power distribution management technology development, combining the technology requirement of the modern data center application environment, adopting key technology with fully independent intellectual property, the product is designed in combination of network communication, power distribution and network management and hot swappable technology.
FINAL YEAR SEMINAR ON PROJECT OF "GSM BASED INDUSTRIAL MACHINE CONTROL" PRESENTED BY DNYANESHWAR BHAGWAT,AJAY BHOSALE,PRASHANT BODHE,NIKHIL GAIKWAD... FROM KBP,SATARA
8310 Datalogger - 8310-N Series with Enclosureswebadminjk
The 8310 uses low-power circuitry to achieve long-life battery operation
and provide a rugged system for unattended field operation in extreme
environments
The project "STREET LIGHT MONITORING AND CONTROL SYSTEM" is developed for automatic
street lights maintenance and to reduce power consumption. The application is designed in such a way that we
place light sensors in all street light circuits, which is responsible to switch on and off automatically. once the
lights are switched on current sensors placed at every street light circuits are responsible to report problem status
to the centralized system with help of GSM module attached with the circuit. The status is available in the
centralized system, the work man now can easily locate the particular light to take care which minimizes the time
to search it and repair. The system also maintains database to store useful information from each street light like
power consumption, total number of burning hours, total number of interruptions, tally the actual power
consumption with the power supplied and details of fault detection. Hence maintaining the system with optimal
power consumption giving commercial benefits to business and the prosperity of the city as a whole.
.Keywords: current sensor, GSM, Light Dependant Resistor [LDR], microcontroller
This presentation is based on the controlling of home appliances using simple commands. The key components are a SIM 300 GSM module, an Arduino UNO board and a 4 channel 12 volt relay.
suppose this security system is fitted in your car . If a thief breaks in and tries to drive away your car then he/she have enter the code for ignition .If the code mismatches then it will send a message to the proprietor's cell "security breach".By this we will come to know that someone is trying to steal your car.
"THAT IS THE IDEA OF THE PROJECT"
low cost housing, its not yet finnished. See we are facing a crisis of accomodation hence lack of employment but if we implement this project in lowly developed areas if Zimbabwe like Masvingo, it can create employment, attract invetors from outside the country, even bring big companies to establish in this nation.
Next Industries' miniOMNIAlog datalogger, with different radio interfaces, cloud data storage, sms/email alarms, vibrating wire, 4..20mA, 0-10V, NTC, Thermocouples, and Modbus sensors, other than a low power requirements make this four channel datalogger the perfect choice for unattended data monitoring in remote places.
Solar panel monitoring solution using IoT-Faststream TechnologiesSudipta Maity
Faststream Technologies offers an automated IOT based solar panel monitoring/troubleshooting system that allows for automated solar panel monitoring from anywhere over the internet. As part of our solution, we make use of several IoT gateways suitable for different needs, based on SoCs like STM32, ESP32, ublox, CC3200, SiliconLabs, to monitor the solar panel parameters, in turn, providing Solar Plant Insights.
Our system constantly monitors the solar panel and transmits various parameters to the Cloud over the IoT system. Here we make use of the IoT platform to transmit solar power parameters to Amazon/ Azure cloud /IOT server via the gateway (over WiFi and Ethernet). A powerful web interface allows viewing of data in meaningful formats, enabling users to make decisions.
Global adoption of automation, AI, and robotics to increase productivity is
inseparable from monitoring and managing equipment remotely. Teltonika
Networks has long-standing experience in this field, enabling manufacturers,
integrators, and machine builders to stay in control of their equipment
anytime, anywhere
The best way to efficient maintaining and securing your business operation is through monitoring.
Constantly checking your essential equipment is always been ways to prevent failure and unexpected break down however due to fast changing society manual monitoring is already out of league.
Linkwise developed it’s solution for this dilemma, in order to make an efficient, cost-effective and reliable monitoring system that is capable to send a critical alarm via SMS text message and Email.
For more information Visit: https://linkwisetech.com/
gui based device controller using matlab Major presentationPalak Sinha
major presentation on graphical user interface developing in matlab to control the device control like arduino output , for extending it to home automation etc.
Mitsubishi scada software mc works64 dienhathe.vnDien Ha The
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Điện Công Nghiệp Mitsubishi, Điện Công Nghiệp,
Điện Hạ Thế Mitsubishi, Điện Hạ Thế,
Điện Dân Dụng Mitsubishi, Điện Dân Dụng,
Mitsubishi,
Thiết Bị Đóng Cắt Mitsubishi, Thiết Bị Đóng Cắt,
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
MATHEMATICS BRIDGE COURSE (TEN DAYS PLANNER) (FOR CLASS XI STUDENTS GOING TO ...PinkySharma900491
Class khatm kaam kaam karne kk kabhi uske kk innings evening karni nnod ennu Tak add djdhejs a Nissan s isme sniff kaam GCC bagg GB g ghan HD smart karmathtaa Niven ken many bhej kaam karne Nissan kaam kaam Karo kaam lal mam cell pal xoxo
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR - Slides Onl...Peter Gallagher
In this session delivered at Leeds IoT, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub
3. 1COMPANY
3
Next Industries designs and manufactures high accuracy data
loggers, gateway and sensors provided with Internet of
Things technology.
Thanks to wireless connectivity our devices are able to
communicate with cloud and manage alarm or notifications,
thus being “intelligent”. The so called “intelligent systems”
are devices that transform the way you work, live and connect
to the world through internet in open source, ecologic
and sustainable way.
4. 2INTRODUCTION
miniOMNIAlog are ultra low
powered loggers with optional
integral modem designed
specifically for remote and stand
alone applications.
miniOMNIAlog is designed for hard
environment field use with IP67
box, USB memory stick and
electromechanical relays for each
measuring channel.
5. 3BENEFITS
IP67 box with weather proof enclosures
Low cost solution
Cloud software monitoring
Setup software with Web Server On Board
Internal memory and USB memory stick
Battery on Board
Small size 151 x 125 x 90 mm (L x W x H)
6. 4FEATURES
4 differential analog channels
Measures: mV, mA, mV/V, NTC,Thermocouple,
Vibrating Wire (depends on the models)
0,05% F.S. Accuracy
2G-3G, WMBUS ,SIGFOX
Web Server on board
Internet Of Things Technology
Cloud Base Dashbord Managemen
14. 5APPLICATIONS
APPLICATION 1 - AGRICOLTURE
Our data loggers can be used in the Agriculture
industry to monitor temperature, humidity, soil
moisture, light level in various processes, for both
plants and flowers including also green houses,
shipment and storage. It is known that these
parameters directly influence both the quality of the
products and their operation costs, so only benefit will
come from the use of a wireless network or portable
USB device.
15. 5APPLICATIONS
APPLICATION 2 – STRUCTURAL MONITORING
It often happens in the field of building industry the
need to monitor work-in-progress effects on the
existing buildings near the construction area -
especially in urban areas. Excavations or soil handling
can damage stability and structural integrity of the
adjactent buildings. The system has to turn out to be
efficient and reliable in order to allow works going on
without any obstacle and security of other existing
building and to guarantee citizenry.
16. 5APPLICATIONS
APPLICATION 3 – BIOGAS MONITORING
It is possible to produce biogas by aerobic or
anaerobic “digestion”, starting from various
biodegradable materials. The gas obtained in this
way contains 60/70% of methane and can be used to
fuel the boiler required by the digester but also for
electric generator engines. Feed rate controlling
would have improved the production process and this
kind of measurment is also generally required for
certification purposes.
17. 5APPLICATIONS
APPLICATION 4 - LABORATORIES
Our data loggers can be used in a wide range of
laboratories as Climate Monitoring, Autoclaves,
Incubators, Laboratories Ovens, Freezers and others
applications where accuracy, reliability and
documentation are required, using different
parameters including: very high temperatures in
ovens and autoclaves, low temperatures in
refrigerators and freezers, humidity, Ph, pressure,
differential PRESS pressure, CO2 and more.
18. 6SOFTWARE
CLOUD
It is a web service to monitor and
control remotely all your field devices:
drag and drop widgets display critical information in
the way you choose to empower effective decisions.
Tablet/Smartphone/PC visualization
User-adjustable Cloud dashboard(s)
User-adjustable graphical Widgets
Data accessible everytime, everywhere
19. 6SOFTWARE
19
CLOUD
EVERY TIME, EVERYWHERE
Display data on tablet, pc or smartphone and
monitor your equipments every time you need,
everywhere you are in a fast, efficient and
professional way.
BUILD YOUR GRAPHICAL INTERFACE
Graphical dashboards are totally user-
adjustable; this powerful feature enables users to
easily create a custom-made graphical layout of
their remote installation in no time.
20. 6SOFTWARE
CLOUD
Connect miniOMNIAlog to our Cloud
software is fast and easy. Only need to
connect the data logger to the internet
(LAN, external modem) and all data will be
available in real time, everywhere.
It's possible to set different kind of widgets:
Column Chart
Gauge Chart
Map Chart
Image Overlay Chart
Gathered data can be downloaded by
selecting a single sensor or all sensor
connected to a device.
20
21. 6SOFTWARE
ALARMS
OMNIAlog family provides an awesome
configurable tool for alarm management.
From all channel page is possible to select
alarm thresholds for each configured channel.
Available thresholds are:
High threshold
Low threshold
Derivate
A combination of the above
miniOMNIAlog can automatically send alarms
via email (requires smtp server/internet
connection) and sms (requires 2G/3G
modem).
On alarms, miniOMNIAlog can be programmed
to increase sample frequency or react on his
digital output.
21
22. 6SOFTWARE
ALARMS
A further function provided by mimiOMNIAlog's
web server is Virtual Channels Alarm with
Logical Operations.
It allows to use logical operators AND, OR, XOR,
NOT on alarm state of channels, to create
complex alarm rules.
With miniOMNIAlog's web server you can select
the action to take when an alarm condition has
occured.
22
23. 6SOFTWARE
MEASUREMENT TRANSFER
miniOMNIAlog can be programmed to
send measure logs after each
measurement or daily.
Transfers can happen via SMTP (mail) or
FTP.
Requires an active network/internet
connection.
23
24. 6SOFTWARE
24
VIRTUAL CHANNELS
Usually we use sensors to get the measure it
provides. Anyway, we could need a way to
modify that number because we need either
a derivated measure (airflow/airspeed) or an
expression calculated on more than 1 sensor
(dewpoint or Δt between two zones for
instance). We can calculate this with
spreadsheet or just let our data logger do
the work. Alarms are available on virtual
channels too.
25. 6SOFTWARE
25
MODBUS LIBRARY
Modbus enables communication among many devices connected to the same network, for
example a system that measures temperature and humidity and communicates the results to a
computer, or our NI10 Vibrating Wire Modbus interface connected to the miniOMNIAlog data
logger. You can connect virtually every modbus device to our data logger, since you can set every
parameter needed.
27. 7OMNIAlog FAMILY
27
NI-10 configurations:
Vibrating Wire interface sensors (with
Thermistor) to digital datalogger
Modbus-RTU protocol over RS485
(isolated) interface for digital datalogger
connection
Programmable Address (allows daisy
chain connection)
Slim size for DIN Panel Mount
28. OMNIAlog Cabinet:
Large capacity to hold and connect
OMNIAlog devices
High-quality stainless steel
enclosure, installed on wall or support
frame, permits long term installation
also in aggressive environment.
Supplied with OMNIAlog module,
rack and LAN cable for PC/Laptop
connection
Rack for up to N.8 multiplexer boards
7OMNIAlog FAMILY
28
29. OMNIAlog FTC:
7OMNIAlog FAMILY
29
Up to 4 thermocouple temperature
inputs
Up to 4 0-30V Voltage Inputs
Temperature on board
USB memory stick included
Ethernet
Supports J,K,R,S,T,N,E and B type
thermocouples
30. Next Industries S.r.L
Via Serpero 4/F2 - 20060 Masate (MI) Italy - T+39 02.95764356
30
FURTHER DETAILS ON:
www.ruggedaq.com