Testing/Manufacture/Mini Tensile Tester
•
0 likes•283 views
Mini Tensile Testing for Test the Paper, Textile, Fabric, Spring
Report
Share
Report
Share
Download to read offline
Recommended
Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specifications, 500 kn screw jack threaded rod, 100000 lbs screw jack torque calculation, screw jack thread type features:
1. Maximum load capacity 50 ton, maximum torque 848 Nm.
2. Lift screw diameter 120 mm, pitch 20 mm.
3. 33:3, 32:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1000 rpm input, standard lifting speed 1818 mm/min and 625 mm/min.
8. No standard lift screw stroke, maximum travel stroke 5500mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specific...
Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specific...Jacton Electromechanical Co.,Ltd
Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acme screw jack linear, 10000lbs acme thread screw jack, compact acme screw jacks features:
1. Maximum load capacity 5 ton, maximum torque 44.2 Nm.
2. Lift screw diameter 40 mm, pitch 7 mm.
3. 6:1, 24:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 1750 mm/min and 437.5 mm/min.
8. No standard lift screw stroke, maximum travel stroke 2000mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acm...
Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acm...Jacton Electromechanical Co.,Ltd
20 ton screw jack,jtc200 model worm gear screw jack load 200kn,20 tonnes machine screw actuators dimensions,drawing,design,assembly,formula,calculation features:
1. Lifting Force 200kN. Under max. lifting force, drive torque high speed 146Nm, low speed 47.75Nm.
2. Acme screw diameter 70 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 3000mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 2 cubic screw jack, Germany INKOMA HSG-200 cubic screw jack, PFAFF MERKUR M6 cubic screw jack and GROB BJ2 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.20 ton screw jack,jtc200 model worm gear screw jack load 200kn,20 tonnes mach...
20 ton screw jack,jtc200 model worm gear screw jack load 200kn,20 tonnes mach...Jacton Electromechanical Co.,Ltd
35 ton lifting jack,jtc350 350kn worm gear screw jack,high lift mechanical gear jack,long stroke linear screw drive actuator features:
1. Lifting Force 350kN. Under max. lifting force, drive torque high speed 325.51Nm, low speed 107.46Nm.
2. Acme screw diameter 100 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 4500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 4 cubic screw jack, Germany PFAFF MERKUR M7 cubic screw jack and GROB BJ4 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.35 ton lifting jack,jtc350 350kn worm gear screw jack,high lift mechanical ge...
35 ton lifting jack,jtc350 350kn worm gear screw jack,high lift mechanical ge...Jacton Electromechanical Co.,Ltd
250kn worm gear screw jack,jtc250 25 ton heavy load screw jack,25 tonnes high capacity machine screw actuators features:
1. Lifting Force 250kN. Under max. lifting force, drive torque high speed 200.36Nm, low speed 67.32Nm.
2. Acme screw diameter 80 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 3500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 3 cubic screw jack, Germany PFAFF MERKUR M6 cubic screw jack and GROB BJ3 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.250kn worm gear screw jack,jtc250 25 ton heavy load screw jack,25 tonnes high...
250kn worm gear screw jack,jtc250 25 ton heavy load screw jack,25 tonnes high...Jacton Electromechanical Co.,Ltd
Recommended
Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specifications, 500 kn screw jack threaded rod, 100000 lbs screw jack torque calculation, screw jack thread type features:
1. Maximum load capacity 50 ton, maximum torque 848 Nm.
2. Lift screw diameter 120 mm, pitch 20 mm.
3. 33:3, 32:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1000 rpm input, standard lifting speed 1818 mm/min and 625 mm/min.
8. No standard lift screw stroke, maximum travel stroke 5500mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specific...
Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specific...Jacton Electromechanical Co.,Ltd
Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acme screw jack linear, 10000lbs acme thread screw jack, compact acme screw jacks features:
1. Maximum load capacity 5 ton, maximum torque 44.2 Nm.
2. Lift screw diameter 40 mm, pitch 7 mm.
3. 6:1, 24:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 1750 mm/min and 437.5 mm/min.
8. No standard lift screw stroke, maximum travel stroke 2000mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acm...
Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acm...Jacton Electromechanical Co.,Ltd
20 ton screw jack,jtc200 model worm gear screw jack load 200kn,20 tonnes machine screw actuators dimensions,drawing,design,assembly,formula,calculation features:
1. Lifting Force 200kN. Under max. lifting force, drive torque high speed 146Nm, low speed 47.75Nm.
2. Acme screw diameter 70 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 3000mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 2 cubic screw jack, Germany INKOMA HSG-200 cubic screw jack, PFAFF MERKUR M6 cubic screw jack and GROB BJ2 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.20 ton screw jack,jtc200 model worm gear screw jack load 200kn,20 tonnes mach...
20 ton screw jack,jtc200 model worm gear screw jack load 200kn,20 tonnes mach...Jacton Electromechanical Co.,Ltd
35 ton lifting jack,jtc350 350kn worm gear screw jack,high lift mechanical gear jack,long stroke linear screw drive actuator features:
1. Lifting Force 350kN. Under max. lifting force, drive torque high speed 325.51Nm, low speed 107.46Nm.
2. Acme screw diameter 100 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 4500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 4 cubic screw jack, Germany PFAFF MERKUR M7 cubic screw jack and GROB BJ4 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.35 ton lifting jack,jtc350 350kn worm gear screw jack,high lift mechanical ge...
35 ton lifting jack,jtc350 350kn worm gear screw jack,high lift mechanical ge...Jacton Electromechanical Co.,Ltd
250kn worm gear screw jack,jtc250 25 ton heavy load screw jack,25 tonnes high capacity machine screw actuators features:
1. Lifting Force 250kN. Under max. lifting force, drive torque high speed 200.36Nm, low speed 67.32Nm.
2. Acme screw diameter 80 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 3500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 3 cubic screw jack, Germany PFAFF MERKUR M6 cubic screw jack and GROB BJ3 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.250kn worm gear screw jack,jtc250 25 ton heavy load screw jack,25 tonnes high...
250kn worm gear screw jack,jtc250 25 ton heavy load screw jack,25 tonnes high...Jacton Electromechanical Co.,Ltd
Jtc150 150kn cubic worm gear screw jack,lifting screw drive spindle 60 mm,15 ton load electric machine screw jack,rubber bellows,limit switches,b5,b15 flange mounting motor driven features:
1. Lifting Force 150kN. Under max. lifting force, drive torque high speed 104.73Nm, low speed 33.74Nm.
2. Acme screw diameter 60 mm, pitch 9 mm.
3. High gear ratio 1/9, low gear ratio 1/36.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 2500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 1 cubic screw jack, Germany INKOMA HSG-5 cubic screw jack, PFAFF MERKUR M5 cubic screw jack, GROB BJ1 cubic screw jack and Australia ZIMM Z-150-S/R cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.Jtc150 150kn cubic worm gear screw jack,lifting screw drive spindle 60 mm,15 ...
Jtc150 150kn cubic worm gear screw jack,lifting screw drive spindle 60 mm,15 ...Jacton Electromechanical Co.,Ltd
JTC10 10KN lifting lowering screw jack,1000 kg cubical gearbox screw jack up and down,1 ton worm gear screw jack open close features:
1. Lifting Force 10kN. Under max. lifting force, drive torque high speed 5.6Nm, low speed 1.83Nm.
2. Acme screw diameter 20 mm, pitch 4 mm.
3. High gear ratio 1/4, low gear ratio 1/16.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 600mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON MULI 2 cubic screw jack, Germany INKOMA HSG-2 cubic screw jack, PFAFF MERKUR M2 cubic screw jack, GROB MJ2 cubic screw jack, Australia ZIMM Z-10-S/R or GSZ-10-S/R cubic screw jack and Switzerland NOZAG NSE 10-SN/SL cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.JTC10 10KN lifting lowering screw jack,1000 kg cubical gearbox screw jack up ...
JTC10 10KN lifting lowering screw jack,1000 kg cubical gearbox screw jack up ...Jacton Electromechanical Co.,Ltd
JTC50 model self-locking screw jack,5 ton self hold worm gear screw jack,50kn heavy duty mechanical actuators lift,positioning precision lifting screw jacks features:
1. Lifting Force 50kN. Under max. lifting force, drive torque high speed 30.97Nm, low speed 9.73Nm.
2. Acme screw diameter 40 mm, pitch 7 mm.
3. High gear ratio 1/7, low gear ratio 1/28.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 2000mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON MULI 4 cubic screw jack, Germany INKOMA HSG-4 cubic screw jack, PFAFF MERKUR M4 cubic screw jack, GROB MJ4 cubic screw jack, Australia ZIMM Z-50-S/R or GSZ-50-S/R cubic screw jack and Switzerland NOZAG NSE 50-SN/SL cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.JTC50 model self-locking screw jack,5 ton self hold worm gear screw jack,50kn...
JTC50 model self-locking screw jack,5 ton self hold worm gear screw jack,50kn...Jacton Electromechanical Co.,Ltd
Jtc100 cubic screw jack,100kn worm gear screw jack,55 mm diameter spindle,9 mm pitch,10 ton heavy lifting screw jacks,10 tonnes machine screw actuators features:
1. Lifting Force 100kN. Under max. lifting force, drive torque high speed 67.19Nm, low speed 21.46Nm.
2. Acme screw diameter 55 mm, pitch 9 mm.
3. High gear ratio 1/9, low gear ratio 1/36.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 2500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON MULI 5 cubic screw jack, Germany INKOMA HSG-5 cubic screw jack, PFAFF MERKUR M5 cubic screw jack, GROB MJ5 cubic screw jack, Australia ZIMM Z-100-S/R or GSZ-100-S/R cubic screw jack and Switzerland NOZAG NSE 100-SN/SL cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.Jtc100 cubic screw jack,100kn worm gear screw jack,55 mm diameter spindle,9 m...
Jtc100 cubic screw jack,100kn worm gear screw jack,55 mm diameter spindle,9 m...Jacton Electromechanical Co.,Ltd
More Related Content
What's hot
Jtc150 150kn cubic worm gear screw jack,lifting screw drive spindle 60 mm,15 ton load electric machine screw jack,rubber bellows,limit switches,b5,b15 flange mounting motor driven features:
1. Lifting Force 150kN. Under max. lifting force, drive torque high speed 104.73Nm, low speed 33.74Nm.
2. Acme screw diameter 60 mm, pitch 9 mm.
3. High gear ratio 1/9, low gear ratio 1/36.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 2500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 1 cubic screw jack, Germany INKOMA HSG-5 cubic screw jack, PFAFF MERKUR M5 cubic screw jack, GROB BJ1 cubic screw jack and Australia ZIMM Z-150-S/R cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.Jtc150 150kn cubic worm gear screw jack,lifting screw drive spindle 60 mm,15 ...
Jtc150 150kn cubic worm gear screw jack,lifting screw drive spindle 60 mm,15 ...Jacton Electromechanical Co.,Ltd
JTC10 10KN lifting lowering screw jack,1000 kg cubical gearbox screw jack up and down,1 ton worm gear screw jack open close features:
1. Lifting Force 10kN. Under max. lifting force, drive torque high speed 5.6Nm, low speed 1.83Nm.
2. Acme screw diameter 20 mm, pitch 4 mm.
3. High gear ratio 1/4, low gear ratio 1/16.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 600mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON MULI 2 cubic screw jack, Germany INKOMA HSG-2 cubic screw jack, PFAFF MERKUR M2 cubic screw jack, GROB MJ2 cubic screw jack, Australia ZIMM Z-10-S/R or GSZ-10-S/R cubic screw jack and Switzerland NOZAG NSE 10-SN/SL cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.JTC10 10KN lifting lowering screw jack,1000 kg cubical gearbox screw jack up ...
JTC10 10KN lifting lowering screw jack,1000 kg cubical gearbox screw jack up ...Jacton Electromechanical Co.,Ltd
JTC50 model self-locking screw jack,5 ton self hold worm gear screw jack,50kn heavy duty mechanical actuators lift,positioning precision lifting screw jacks features:
1. Lifting Force 50kN. Under max. lifting force, drive torque high speed 30.97Nm, low speed 9.73Nm.
2. Acme screw diameter 40 mm, pitch 7 mm.
3. High gear ratio 1/7, low gear ratio 1/28.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 2000mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON MULI 4 cubic screw jack, Germany INKOMA HSG-4 cubic screw jack, PFAFF MERKUR M4 cubic screw jack, GROB MJ4 cubic screw jack, Australia ZIMM Z-50-S/R or GSZ-50-S/R cubic screw jack and Switzerland NOZAG NSE 50-SN/SL cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.JTC50 model self-locking screw jack,5 ton self hold worm gear screw jack,50kn...
JTC50 model self-locking screw jack,5 ton self hold worm gear screw jack,50kn...Jacton Electromechanical Co.,Ltd
Jtc100 cubic screw jack,100kn worm gear screw jack,55 mm diameter spindle,9 mm pitch,10 ton heavy lifting screw jacks,10 tonnes machine screw actuators features:
1. Lifting Force 100kN. Under max. lifting force, drive torque high speed 67.19Nm, low speed 21.46Nm.
2. Acme screw diameter 55 mm, pitch 9 mm.
3. High gear ratio 1/9, low gear ratio 1/36.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 2500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON MULI 5 cubic screw jack, Germany INKOMA HSG-5 cubic screw jack, PFAFF MERKUR M5 cubic screw jack, GROB MJ5 cubic screw jack, Australia ZIMM Z-100-S/R or GSZ-100-S/R cubic screw jack and Switzerland NOZAG NSE 100-SN/SL cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.Jtc100 cubic screw jack,100kn worm gear screw jack,55 mm diameter spindle,9 m...
Jtc100 cubic screw jack,100kn worm gear screw jack,55 mm diameter spindle,9 m...Jacton Electromechanical Co.,Ltd
What's hot (18)
Jtc150 150kn cubic worm gear screw jack,lifting screw drive spindle 60 mm,15 ...
Jtc150 150kn cubic worm gear screw jack,lifting screw drive spindle 60 mm,15 ...
JTC10 10KN lifting lowering screw jack,1000 kg cubical gearbox screw jack up ...
JTC10 10KN lifting lowering screw jack,1000 kg cubical gearbox screw jack up ...
JTC50 model self-locking screw jack,5 ton self hold worm gear screw jack,50kn...
JTC50 model self-locking screw jack,5 ton self hold worm gear screw jack,50kn...
Jtc100 cubic screw jack,100kn worm gear screw jack,55 mm diameter spindle,9 m...
Jtc100 cubic screw jack,100kn worm gear screw jack,55 mm diameter spindle,9 m...
Leading Mini Crawler Crane Hire Service Provider: Call Today
Leading Mini Crawler Crane Hire Service Provider: Call Today
Similar to Testing/Manufacture/Mini Tensile Tester
Similar to Testing/Manufacture/Mini Tensile Tester (20)
Testing/Manufacture/tensile and mini tensile machine
Testing/Manufacture/tensile and mini tensile machine
FPT-F1-Friction Peel Tester for Medical Adhesive Bandage
FPT-F1-Friction Peel Tester for Medical Adhesive Bandage
Electronic Jacquard machine Manufacturer Hangzhou Wumu Technology Co.,Ltd.
Electronic Jacquard machine Manufacturer Hangzhou Wumu Technology Co.,Ltd.
Recently uploaded
Recently uploaded (20)
HOA1&2 - Module 3 - PREHISTORCI ARCHITECTURE OF KERALA.pptx
HOA1&2 - Module 3 - PREHISTORCI ARCHITECTURE OF KERALA.pptx
"Lesotho Leaps Forward: A Chronicle of Transformative Developments"
"Lesotho Leaps Forward: A Chronicle of Transformative Developments"
Kuwait City MTP kit ((+919101817206)) Buy Abortion Pills Kuwait
Kuwait City MTP kit ((+919101817206)) Buy Abortion Pills Kuwait
HAND TOOLS USED AT ELECTRONICS WORK PRESENTED BY KOUSTAV SARKAR
HAND TOOLS USED AT ELECTRONICS WORK PRESENTED BY KOUSTAV SARKAR
Standard vs Custom Battery Packs - Decoding the Power Play
Standard vs Custom Battery Packs - Decoding the Power Play
Theory of Time 2024 (Universal Theory for Everything)
Theory of Time 2024 (Universal Theory for Everything)
Convergence of Robotics and Gen AI offers excellent opportunities for Entrepr...
Convergence of Robotics and Gen AI offers excellent opportunities for Entrepr...
Digital Communication Essentials: DPCM, DM, and ADM .pptx
Digital Communication Essentials: DPCM, DM, and ADM .pptx
Query optimization and processing for advanced database systems
Query optimization and processing for advanced database systems
Design For Accessibility: Getting it right from the start
Design For Accessibility: Getting it right from the start
Max. shear stress theory-Maximum Shear Stress Theory Maximum Distortional ...
Max. shear stress theory-Maximum Shear Stress Theory Maximum Distortional ...
PE 459 LECTURE 2- natural gas basic concepts and properties
PE 459 LECTURE 2- natural gas basic concepts and properties
8086 Microprocessor Architecture: 16-bit microprocessor
8086 Microprocessor Architecture: 16-bit microprocessor
Testing/Manufacture/Mini Tensile Tester
- 1. Catalogue of Mini Universal Testing Machine FEC R World Class Testing Equipments An ISO 9001 Certified Co.
- 2. We are introduce our new and compact version Universal Testing Machine for Paper, Spring Compression, Filtration media, Non woven, Flooring Sheet, Fabric, Yarn, Button Pull, Electronic Thimbles, Small box compression, Rubber Testing etc Multipurpose use. ? ?This equipment multipurpose use Like Universal Testing Machine ?Maximum Load Capacity 100 Kg ?Maximum length for testing 100, 200, 300, 400, 500, 600 mm ?This equipment is designed as very easy to use and operate ?Included complete operating How to operate manual Structure made from G.I Sheet duly Epoxy Mini Universal Testing Machine (Mini Tensile, Spring Compression) ?This equipment made according to National and International Standard Test Method ?Calibration : Certificate will be issued with machine ?Complete micro processor chip based ?One set of fixture will be provide with machine ?Optional Gripping Fixture : Paper Gripping fixture, Spring Compression, Rubber Gripping, Universal vice type, Button Pull Fixture, yarn Gripping Fixture ?Peak hold Facility : when sample will be brake maximum load will be keep in Peak hold ?Elongation : digitally or scale is optional ?This Equipment very compact and maintenance free Coated ?Invertor operated : if power is failure you can test the sample ?Motorized operated up and down ?Safety switch both side : machine will be stop automatically ?Over Limit protection : Desired set the over limit after that machine wil be stop automatic ?Electric Consumption maximum only 100 Watt 230 Volt maximum you can operate with inverter if power failure www.fecproduct.com Sales Office: 9A, Gurudwara Road, Hari Vihar (Kakraula), Opp. Metro Poll No. 816, New Delhi 110043 (INDIA). Correspondence Address : Plot No. 35, K-1 Extn, Bank Wali Gali Gurudwara Road, Mohan Garden, Uttam Nager, Delhi -110059. Cell - 9811478874, 9811938703, 9212912990 E-mail - info@fecproduct.com/ inquiry_fec@yahoo.com Website - www.fecproduct.com