Máy tính ra đời kéo theo rất nhiều thay đổi trong cuộc sống, và sự xuất hiện của mạng Internet là một minh chứng rõ rang nhất. Thế nhưng, ở thời buổi ban đầu, việc xây dựng một mạng máy tính hoàn toàn không đơn giản. Bạn chỉ cần một sợi dây cáp chéo UTP/STP được bấm bởi các đầu nối RJ45 là có thể giúp cho 2 máy tính giao tiếp được. Thế nhwung, trên các sợi dây kết nối luôn xuất hiện sự suy hao tín hiệu và nhiễu bên ngoài ảnh hưởng vào. Kết quả là các máy tính ở quá xa nhau không thể nhận được đúng dữ liệu được truyền đi. Do vậy, người ta chế tạo một thiết bị gọi ra Repeater (bộ lặp) để giúp mở rộng khoảng cách kết nối giữa các máy tính. Repeater không đơn giản là bộ khuếch đại tín hiệu bởi vì nếu chỉ thuần túy khuếch đại tín hiệu thì nó cũng khuếch đại cả nhiễu xuất hiện trong tín hiệu gốc. Nói một cách chính xác, tín hiệu do repeater nhận được sẽ được lọc nhiễu, lọc méo, tái tạo rồi mới phát tiếp đến máy đầu xa. Hub (bộ tập trung) là thiết bị cải tiến của repeater và thường có nhiều port (cổng) hơn cả repeater. Cả hub và repeater đều hoạt động trên nguyên tắc là thu tín hiệu, sau đó lọc nhiễu, lọc méo, tái tạo lại tín hiệu và truyền đi, chúng không quan tâm đến dữ liệu đang truyền là gì, do đó chúng được xếp loại là thiết bị lớp Physical (lớp vật lý) trong mô hình OIS. Các thiết bị nối vào hub hay repeater buộc phải hoạt động ở chế độ half-duplex (bán song công) và sử dụng cơ chế đa truy nhập nhận song mang và phát hiện đụng độ CSMA/CD (Carrier Sense Multi Access/Collision Detection). Do đặc tính half-duplex làm cho mạng hoạt động chậm nên hiện nay hub và repeater rất ít được sử dụng trong mạng LAN.
The document discusses modifying a network simulation in OMNeT++ to allow for additional nodes and connections between nodes. It describes updating the Node.cc file to allow nodes to select random destinations when transmitting messages. It also covers encapsulating and decapsulating different header types when sending packets between nodes, and creating a new header type called "MyHeader" to insert between the IP and MAC headers in the simulation.
The document discusses simulation using OMNeT++, an object-oriented modular discrete event network simulation framework. It provides an overview of OMNeT++'s core components including modules, gates, channels, and the simulation process. Key aspects covered include writing simulations using the OMNeT++ modeling language NED, defining simple and compound modules, connecting modules with gates and channels, and performing discrete event simulation runs in OMNeT++.
Tutorial 2 downloading and i nstalling omnet++Mohd Batati
This document provides instructions for downloading and installing the OMNet++ network simulation software on a Windows system. It details extracting the downloaded file, launching a configuration script, compiling the source code using make, and locating additional documentation for further setup assistance.
This document provides instructions for creating a simple OMNeT++ simulation project. It describes how to start the OMNeT++ IDE, create a workspace, add a simple module with input and output gates, define a network with two instances of the module connected by a link, and run the simulation. The key steps are opening the OMNeT++ IDE, creating a new project and simple module, defining the module's gates, creating a network with two module instances connected by a link, and running the simulation to test it.
The document discusses modifying C++ code in OMNeT++ simulations to model node behavior and energy consumption over time. It describes adding code to nodes to send periodic packets that consume energy, and have nodes stop transmitting when energy is depleted. It also discusses using the OMNeT++ INI file to configure simulation parameters like transmission interval and initial energy for different experiment configurations.
2018-11-06: Unfortunately, LinkedIn/Slideshare disabled the update functionality and, thus, I had to upload an updated version of this introduction to OMNeT++ as new presentation. It is available here: https://www.slideshare.net/christian.timmerer/an-introduction-to-omnet-54
VLANs logically segment LANs into broadcast domains by using switches to assign ports and their attached devices to VLAN groups based on their MAC address, IP subnet, or switch port. This allows devices that are physically located on different floors or buildings to belong to the same logical LAN segment while preventing Layer 2 broadcasts from crossing VLAN boundaries. VLAN trunk links between switches allow multiple VLANs to be transmitted over the same physical link.
Nhận viết luận văn Đại học , thạc sĩ - Zalo: 0917.193.864
Tham khảo bảng giá dịch vụ viết bài tại: vietbaocaothuctap.net
Download luận văn đồ án tốt nghiệp ngành công nghệ thông tin với đề tài: Tìm hiểu kỹ thuật lập trình Network Service, cho các bạn làm luận văn tham khảo
Máy tính ra đời kéo theo rất nhiều thay đổi trong cuộc sống, và sự xuất hiện của mạng Internet là một minh chứng rõ rang nhất. Thế nhưng, ở thời buổi ban đầu, việc xây dựng một mạng máy tính hoàn toàn không đơn giản. Bạn chỉ cần một sợi dây cáp chéo UTP/STP được bấm bởi các đầu nối RJ45 là có thể giúp cho 2 máy tính giao tiếp được. Thế nhwung, trên các sợi dây kết nối luôn xuất hiện sự suy hao tín hiệu và nhiễu bên ngoài ảnh hưởng vào. Kết quả là các máy tính ở quá xa nhau không thể nhận được đúng dữ liệu được truyền đi. Do vậy, người ta chế tạo một thiết bị gọi ra Repeater (bộ lặp) để giúp mở rộng khoảng cách kết nối giữa các máy tính. Repeater không đơn giản là bộ khuếch đại tín hiệu bởi vì nếu chỉ thuần túy khuếch đại tín hiệu thì nó cũng khuếch đại cả nhiễu xuất hiện trong tín hiệu gốc. Nói một cách chính xác, tín hiệu do repeater nhận được sẽ được lọc nhiễu, lọc méo, tái tạo rồi mới phát tiếp đến máy đầu xa. Hub (bộ tập trung) là thiết bị cải tiến của repeater và thường có nhiều port (cổng) hơn cả repeater. Cả hub và repeater đều hoạt động trên nguyên tắc là thu tín hiệu, sau đó lọc nhiễu, lọc méo, tái tạo lại tín hiệu và truyền đi, chúng không quan tâm đến dữ liệu đang truyền là gì, do đó chúng được xếp loại là thiết bị lớp Physical (lớp vật lý) trong mô hình OIS. Các thiết bị nối vào hub hay repeater buộc phải hoạt động ở chế độ half-duplex (bán song công) và sử dụng cơ chế đa truy nhập nhận song mang và phát hiện đụng độ CSMA/CD (Carrier Sense Multi Access/Collision Detection). Do đặc tính half-duplex làm cho mạng hoạt động chậm nên hiện nay hub và repeater rất ít được sử dụng trong mạng LAN.
The document discusses modifying a network simulation in OMNeT++ to allow for additional nodes and connections between nodes. It describes updating the Node.cc file to allow nodes to select random destinations when transmitting messages. It also covers encapsulating and decapsulating different header types when sending packets between nodes, and creating a new header type called "MyHeader" to insert between the IP and MAC headers in the simulation.
The document discusses simulation using OMNeT++, an object-oriented modular discrete event network simulation framework. It provides an overview of OMNeT++'s core components including modules, gates, channels, and the simulation process. Key aspects covered include writing simulations using the OMNeT++ modeling language NED, defining simple and compound modules, connecting modules with gates and channels, and performing discrete event simulation runs in OMNeT++.
Tutorial 2 downloading and i nstalling omnet++Mohd Batati
This document provides instructions for downloading and installing the OMNet++ network simulation software on a Windows system. It details extracting the downloaded file, launching a configuration script, compiling the source code using make, and locating additional documentation for further setup assistance.
This document provides instructions for creating a simple OMNeT++ simulation project. It describes how to start the OMNeT++ IDE, create a workspace, add a simple module with input and output gates, define a network with two instances of the module connected by a link, and run the simulation. The key steps are opening the OMNeT++ IDE, creating a new project and simple module, defining the module's gates, creating a network with two module instances connected by a link, and running the simulation to test it.
The document discusses modifying C++ code in OMNeT++ simulations to model node behavior and energy consumption over time. It describes adding code to nodes to send periodic packets that consume energy, and have nodes stop transmitting when energy is depleted. It also discusses using the OMNeT++ INI file to configure simulation parameters like transmission interval and initial energy for different experiment configurations.
2018-11-06: Unfortunately, LinkedIn/Slideshare disabled the update functionality and, thus, I had to upload an updated version of this introduction to OMNeT++ as new presentation. It is available here: https://www.slideshare.net/christian.timmerer/an-introduction-to-omnet-54
VLANs logically segment LANs into broadcast domains by using switches to assign ports and their attached devices to VLAN groups based on their MAC address, IP subnet, or switch port. This allows devices that are physically located on different floors or buildings to belong to the same logical LAN segment while preventing Layer 2 broadcasts from crossing VLAN boundaries. VLAN trunk links between switches allow multiple VLANs to be transmitted over the same physical link.
Nhận viết luận văn Đại học , thạc sĩ - Zalo: 0917.193.864
Tham khảo bảng giá dịch vụ viết bài tại: vietbaocaothuctap.net
Download luận văn đồ án tốt nghiệp ngành công nghệ thông tin với đề tài: Tìm hiểu kỹ thuật lập trình Network Service, cho các bạn làm luận văn tham khảo
Giám sát và cảnh báo hoạt động phương tiện vận tải ô tôhieu anh
. Xuất phát từ chính nhu cầu thực tế đó mà nhóm đã đưa ra quyết định chọn đề tài: “ Giám sát và cảnh báo hoạt động phương tiện vận tải ô tô ” để tiến hành nghiên cứu và thực hiện.
Nhận viết luận văn đại học, thạc sĩ trọn gói, chất lượng, LH ZALO=>0909232620
Tham khảo dịch vụ, bảng giá tại: https://vietbaitotnghiep.com/dich-vu-viet-thue-luan-van
Download luận văn đồ án tốt nghiệp ngành điện công nghiệp với đề tài: Giám sát và cảnh báo hoạt động phương tiện vận tải ô tô, cho các bạn làm luận văn tham khảo
Nhận viết luận văn đại học, thạc sĩ trọn gói, chất lượng, LH ZALO=>0909232620
Tham khảo dịch vụ, bảng giá tại: https://vietbaitotnghiep.com/dich-vu-viet-thue-luan-van
Download luận văn đồ án tốt nghiệp ngành điện tử công nghiệp với đề tài: Thiết kế và thi công mô hình điều khiển, giám sát bãi giữ xe ô tô tự động, cho các bạn làm luận văn tham khảo
Nhận viết luận văn đại học, thạc sĩ trọn gói, chất lượng, LH ZALO=>0909232620
Tham khảo dịch vụ, bảng giá tại: https://vietbaitotnghiep.com/dich-vu-viet-thue-luan-van
Download luận văn đồ án tốt nghiệp ngành điện tử công nghiệp với đề tài: Thiết kế và thi công hệ thống điều khiển thiết bị điện trong nhà thông qua Amazon Alexa và cảnh báo chống trộm, cho các bạn làm luận văn tham khảo
Nhận viết luận văn Đại học , thạc sĩ - Zalo: 0917.193.864
Tham khảo bảng giá dịch vụ viết bài tại: vietbaocaothuctap.net
Download luận văn đồ án tốt nghiệp ngành công nghệ thông tin với đề tài: Triển khai DHCP Server trên mô hình mạng ba lớp, cho các bạn tham khảo
Nhận viết luận văn đại học, thạc sĩ trọn gói, chất lượng, LH ZALO=>0909232620
Tham khảo dịch vụ, bảng giá tại: https://vietbaitotnghiep.com/dich-vu-viet-thue-luan-van
Download luận văn đồ án tốt nghiệp ngành kĩ thuật điện tử với đề tài: Quản lý dữ liệu bệnh nhân trong bệnh viện sử dụng công nghệ Rfid, cho các bạn làm luận văn tham khảo
Beezo Share - Đồ Án Thực Tập Công Cụ Giám Sát Mạng PythonBeezo
Giám sát mạng là vô cùng quan trọng. Trong đồ án này hướng dẫn các bạn xây dựng công cụ bắt và phân tích gói tin. Phục vụ cho công việc theo dõi và giám sát mạng bằng ngôn ngữ python.
Nhận viết luận văn Đại học , thạc sĩ - Zalo: 0917.193.864
Tham khảo bảng giá dịch vụ viết bài tại: vietbaocaothuctap.net
Download luận văn đồ án tốt nghiệp ngành điện tử truyền thông với đề tài: Ứng dụng PLC S7 – 1200 để điều khiển và giám sát lò đốt bã mía, cho các bạn làm luận văn tham khảo
ỨNG DỤNG PLC S7-1200 ĐỂ ĐIỀU KHIỂN VÀ GIÁM SÁT LÒ ĐỐT BÃ MÍA hieu anh
Với vai trò là sinh viên chuẩn bị tốt nghiệp, nhóm thực hiện quyết định chọn để tài : “ ỨNG DỤNG PLC S7-1200 ĐỂ ĐIỀU KHIỂN
VÀ GIÁM SÁT LÒ ĐỐT BÃ MÍA ” để nghiên cứu,
Similar to Mang may tinh [compatibility mode] (20)
This document discusses the design specifications and considerations for low-noise amplifiers (LNAs), including:
- Noise figure must be low, requiring a transistor with gm exceeding 1/(25 ohms) for a noise figure below 2 dB.
- Gain must be high enough to minimize noise from subsequent mixers while balancing with linearity.
- Input matching is important to achieve a return loss of at least 10 dB and create an input resistance of 50 ohms without noise.
- Stability is crucial as the LNA interfaces with outside signals.
- Linearity is usually not a limiting factor except for CDMA systems.
- Bandwidth must accommodate the full specified frequency band.
- Several common
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
This document provides an overview and specifications for OpenFlow Switch Version 1.5.0, including:
- Descriptions of OpenFlow ports, tables, matching, and processing pipeline
- Details of the OpenFlow channel and control messages for modifying flow tables, groups and meters
- Formats and structures for common OpenFlow objects like ports, matches, actions
[Links vip.net] gap fill reading practiceSĩ Anh Nguyễn
Mosses are small flowerless plants that grow in dense clumps in damp, shady locations. They have simple one-cell thick leaves covering a thin stem that supports them and produces spore-containing capsules. Mosses can grow in many environments like rocks, soil, wood, or bogs, and are sometimes considered weeds in grass but are included in Japanese gardens for their sense of calm and age. Mosses have various uses including decorations, components of peat, and as wound dressings in World War I for their absorption properties.
This document describes a method for designing a low noise RF amplifier for a 802.11b receiver application using Agilent's ADS design tools. The design procedure uses available gain and stability analysis to create an unconditionally stable amplifier circuit that minimizes noise and meets specifications. Key steps include analyzing the transistor's S-parameters, performing an EM simulation of the printed circuit board layout, and comparing the simulation and measurement results to verify the design meets requirements.
This document discusses designing a low noise RF amplifier for an 802.11b receiver application using Agilent Technologies' ADS design tools. It presents a step-by-step design process starting with establishing requirements, analyzing transistor stability, performing EM/circuit co-simulation, fabrication, and measurement. Key aspects covered include available gain procedure, noise figure design, stability analysis, constructing available gain and noise circles, and comparing simulated and measured results. The goal is to yield a design that works with the first PCB pass to save costs and time.
This document provides an overview and specifications for OpenFlow Switch Version 1.5.0, including:
- Descriptions of OpenFlow ports, tables, matching, and processing pipeline
- Details of the OpenFlow channel and control messages for modifying flow tables, groups and meters
- Formats and structures for common OpenFlow objects like ports, matches, actions
The document discusses data link layer functions including framing methods, flow control, error control, and protocols. Specifically:
- The data link layer is responsible for reliable transmission of frames over an unreliable physical link. It uses framing, flow control, and error control methods.
- Framing involves organizing bits into frames with defined start and end points. Flow control manages buffer usage to prevent overflow. Error control detects and corrects errors using techniques like ARQ.
- Common data link layer protocols are HDLC and PPP, which use flags, control characters and bit stuffing for framing, and sliding windows or stop-and-wait for flow control. ARQ methods like go-back-N are
Chapter 4 internetworking [compatibility mode]Sĩ Anh Nguyễn
The document provides an overview of network layer concepts including internetworking, IP addressing, routing protocols, and routing algorithms. Some key points include:
- Internetworking allows different networks to connect through protocols like virtual circuits and tunneling.
- IP addresses identify systems on a network and consist of a network portion and host portion. Private IP addresses are used internally.
- Routing protocols like RIP, OSPF, and BGP allow routers to share route information and determine the best path between networks.
- Subnetting divides network classes into smaller subnets to better manage IP addresses and network design.
This document provides an overview of physical layer and network media. It discusses digital communication features and advantages, including error correction. It describes frequency allocations by international standards bodies and different network media such as copper cable specifications, fiber optics, and wireless networks. Key points covered include data transmission speeds, signal attenuation over distance, and common cable types for digital networks.
1. M NG MÁY TÍNH
(COMPUTER NETWORKS)
Gi ng viên: ThS. Nguy n Trung DũngGi ng viên: ThS. Nguy n Trung Dũng
B môn: H th ng Vi n thông - Khoa ĐTVT - ĐHBK HN
Email: dungnt@mail.hut.edu.vn
Mobile: 091-353-4544
2. Tài li u tham kh o
1. Andrew S. Tanenbaum, Computer Networks, Pearson
Education International, Fourth Edition - 2003
2. Douglas E. Comer, Internetworking with TCP/IP Vol. I:
Principles, Protocols, and Architecture, Fourth Edition -
Prentice Hall 2000Prentice Hall 2000
3. William Stalling, Data and Computer Communications,
Prentice Hall, Fifth Edition, 1997
4. CCNA, CCNP curriculum, Cisco Press
3. Đ cương môn h c
Đ cương Khoa Đi n t Vi n thông:
Ph n 1: T ng quan v m ng máy tính
Ph n 2: M ng LAN và các v n đ liên quan đ n l p 1 và 2
Ph n 3: K t n i m ng l p 2Ph n 3: K t n i m ng l p 2
Ph n 4: K t n i m ng Internet
4. Qui đ nh
M i bu i h c s g m:
- Lý thuy t
- Seminar do nhóm sinh viên đăng ký trình bày
- Bài t p.
Sinh viên ph i tham d đ y đ các bu i h c lý thuy t và các bu i Seminar.Sinh viên ph i tham d đ y đ các bu i h c lý thuy t và các bu i Seminar.
-Trư ng h p ngh quá 20% s gi h c lý thuy t s không đư c tham d thi
cu i kỳ.
-Trư ng h p v ng m t t i các bu i Seminar/ b o v tài t p l n c a nhóm
có sinh viên đó tham gia s b tr đi m 100% đi m trình bày Seminar.
-Trư ng h p n p mu n bài trình bày, báo cáo hay bài t p l p s b tr
50% đi m trình bày Seminar, báo cáo, bài t p l n.
5. Thi c
Thi gi a kỳ và cu i kỳ
Đi m c a ph n trình bày Seminar, báo cáo, bài t p l n và bài ki m tra
gi a kỳ s tính vào đi m thi gi a kỳ. Bài thi cu i kỳ s là bài thi g m
tr c nghi m và bài t p.tr c nghi m và bài t p.
Đi m thi c a môn h c
- Đi m thi gi a kỳ (trình bày Seminar, báo cáo, bài t p l n và bài ki m
tra gi a kỳ): 30% t ng đi m môn h c
- Thi cu i kỳ: 70% t ng đi m môn h c
6. Seminar và báo cáo
H n n p báo cáo và slide: trư c 1 tu n
Báo cáo đóng quy n (kho ng 20-30 trang
A4); Trong báo cáo ph i có h tên sinh viên
và nhi m v c a m i sinh viên trong vi c tìmvà nhi m v c a m i sinh viên trong vi c tìm
hi u n i dung đư c phân công.
Slide trình bày trên l p trong vòng 1 ti ng
Khi đ n h n n p báo cáo, nhóm sinh viên
n p cho l p trư ng Báo cáo đóng quy n và
g i slide trình bày vào đ a ch email c a
gi ng viên
7. Các ch đ Seminar
STT Ch đ
1 Công ngh DSL. Mô hình h th ng ADSL và k thu t liên quan
2 Các k thu t đa truy nh p
3 M ng WLAN
4 Công ngh Wi-max
5 Công ngh Ethernet, Fast Ethernet, Giga Ethernet5 Công ngh Ethernet, Fast Ethernet, Giga Ethernet
6 Các giao th c truy n s li u X25, HDLC, SDLC, PPP
7 Transparent Switch, đ c đi m và kh năng k t n i
8 Giao th c STP và RSTP
10
Mô ph ng m ng LAN s d ng Network Simulation 2/Opnet/Omnet++.
Cách s d ng các công c phân tích gói tin và đo lưu lư ng m ng
11 Đ a ch IP, subneting, supernet, CIDR, và cách th c hi n subneting
12 Giao th c IPv6
13 Quan h đ a ch l p 2&3, k thu t ánh x đ a ch IP và MAC
8. Các ch đ (ti p …)
14 Các phương pháp/giao th c gán đ a ch IP cho máy tính
15 S d ng hi u qu IP, các phương pháp chuy n đ i đ a ch NAT
16 Giao th c ki m soát và đi u khi n l i trong TCP/IP (ICMP/IGMP)
17 Đ nh tuy n đ ng, thu t toán đ nh tuy n, giao th c RIP và OSPF
18 Ho t đ ng c a giao th c OSPF Single-Area và Multi-Area
19 Ho t đ ng c a DNS, SNMP19 Ho t đ ng c a DNS, SNMP
20 Ho t đ ng c a HTTP và FTP
21 M ng c m bi n không dây (WSN)
22 Gi i thi u v Voice over IP, các giao th c liên quan
23 Thi t k m ng LAN
24 Mô ph ng quá trình đi u khi n t c ngh n trong TCP.
25 Các k thu t b o m t trong m ng máy tính