The Magma adapter from Kazan Networks enables NVMe-oF attached storage via a plug-in solution, forming a key component for composable infrastructures. It is a half-height, half-length PCIe card that installs directly into a JBOF, allowing the JBOF to be upgraded to an Ethernet-attached EBOF for significantly larger scale disaggregation. Kazan Networks' Magma uses extensive hardware acceleration for higher performance at lower power and cost than SOC approaches, and was the industry's first solution enabling NVMe-oF storage system development.

1. The Magma adapter from Kazan Networks is an industry-leading solution which enables NVMe-oF –attached
storage systems via an easy, plug-in solution. Magma forms a key component for the enablement of the
industry’s newest Composable Infrastructures.
Magma is a half-height, half-length form factor card which is designed to install directly into any JBOF with a
PCIe internal slot.
By upgrading an existing JBOF to one that is Ethernet-attached (EBOF), significantly larger scales of
disaggregation are enabled.
Magma-based EBOF (Ethernet-attached Bunch of Flash)
Magma
NVMe-oF Bridge Adapter
Magma NVMe-oF Bridge Adapter

2. Kazan Networks’ Magma represents a unique approach to NVMe-oF bridging, based on extensive levels of
hardware acceleration. This architecture is proven to provide significantly higher performance at lower power
and lower TCO than other, SOC-type approaches.
Kazan Networks developed the industry’s first solution which enables development of storage systems based on
the new NVMe-oF standard. Combined with a PCIe switch and some type of enclosure management, a cost-
efficient EBOF can be brought to market this year.
Features:
• 4 x 25 Gb Ethernet interface
• Four PCIe gen3x4 interfaces to PCIe switch(es)
• Only solution to support RoCEv1, RoCEv2, and iWARP
• Fully hardware-accelerated datapaths mean the lowest latency solution available
• Firmware doesn’t touch I/Os unless there’s an error condition
• The most cost- and power-efficient architecture available
• No DRAM required
• 20W nominal power
For more information:
Please contact Michael Wang, michael.wang@saniffer.com
Orderable Part number: KN-MAGMA3.0
Leadtime: 10 weeks