Macron single beltdrivelinear_actuator_specsheet
•
1 like•71 views
This document provides specifications for the Macron single belt drive linear actuator. It can be customized for lengths up to 76.2 meters. It features high repeatability and accuracy, and can handle loads between 0-500 lbs. It uses a belt drive system with a pulley diameter of 47.75 mm that provides travel of 150 mm per revolution at speeds up to 300 in/sec. It can be mounted with standard NEMA 23, 34, and 42 motors.
Report
Share
Report
Share
Download to read offline
![MACRON SINGLE BELT DRIVE
LINEAR ACTUATOR
i i
---
.,. - ... CIII_
-- --
- - - --
-- --
--- -- -------
Features
- Macron actuators are furnished to your specifications
- Available in any length up to 76.2 meters (250 ft.)
- Fast turnaround on all standard units
Motor Mountini: (See Page 22)
-Motor Mount Adapter
-NEMA 23, 34 & 42 (standard)
48,56 & non-NEMA sizes (optional)
- Spline Adapter
- Shafted PulleyOptional
- Sensors
40.0 [1.574
20.0 [0.787
...-.
,..,
co
111
.=. 106.1 [4.175
tIC! 8.8 [0.347m
-TRAVEL + 127 [5.00] 250' W
-......
79.5 [3.130
71.6 [2.820
if 39.75 [1.565110
N 7.9 [.310......
N
~
...-.
,..,
110
,..,
:.
111 0
~ d
m CD
. .250THRU
~'BOREDINSETFORHEXNUT
BOTHSIDES
3 PLACES
~
9
!no
I.....
~!n
f(COx
j:;).....
8~
o
cO
18 MACRON SINGLEBELT DRIVE- dimensional data
l
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:](https://image.slidesharecdn.com/macronsinglebeltdrivelinearactuatorspecsheet-150209110129-conversion-gate01/85/Macron-single-beltdrivelinear_actuator_specsheet-1-320.jpg)
Recommended
Dyadics_ scll6_ Spec Sheet
The document introduces several mechatronics cylinder models from Dyadic Systems that are available starting at US$295. Key features highlighted include integrated motors, encoders, and drives for accuracy and long life. Models include low-cost, standard, and dust-proof options with various thrust capacities. Specification tables provide additional details on each model such as stroke length, speed, load capacity, and dimensions.
Macron mini6 56-specsheet
The Macron Mini 6-56 linear actuator:
- Is available in lengths up to 12 meters and can be customized to specifications.
- Features repeatability of +/- 0.001 inches and linear accuracy of +/- 0.03 inches.
- Can include optional components like sensors, wrap-around carts, and bellows.
Iai rca2 ta6_c_specsheet
The document provides specifications for the RCA2-TA6C ROBO Cylinder including:
1) It is a 65mm width cylinder with a ball screw drive and strokes from 25mm to 150mm in 25mm increments.
2) It has compatible controllers that support incremental or absolute encoders and can operate with pulse train or serial communication inputs.
3) Dimensions and weights are provided for cylinders of different strokes.
Applimotion uto motor_kits_datasheet
This document provides information about UTO out-runner motor kits from UTO Motors. It describes the features of the UTO series direct drive motors, which include a wide range of diameters from 29mm to 533mm and optional windings, stator designs, back iron rings, and Hall device feedback. Tables provide specifications for sample UTO motors, including part numbers, electrical and mechanical specifications. The motors are sold and serviced by Electromate.
Huawei ar3260 datasheet
Huawei AR G3 AR3200 Series Integrated Enterprise Router (AR0M0036BA00) is the next generation enterprise-class routers based on Huawei proprietary Versatile Routing Platform (VRP) platform. Huawei AR3200 series router utilizes multi-Core CPU and non-blocking switching structure to provide industry-leading performance and extensibility to support requirements of network development.
AAV or EFV iteration 2nd AntiAircraft vehicle based on MTVR
This document summarizes the specifications of an antiaircraft vehicle based on the Medium Tactical Vehicle Replacement (MTVR) platform. It has a universal combat module with an antiaircraft vehicle turret that contains two 40mm automatic cannons, two 120mm missile launchers, four 76/155mm missile launchers, and two containers with vertical missile launchers. The total weight is over 11,000 kg including the equipped crew, turret, launchers, missiles, cannons, and additional equipment. Dimensions and specifications are provided for the universal combat module, turret, and vertical missile launcher containers. It was designed by Andrey F Engineer.
Iai erc2 rgs7_c_specsheet
This document provides specifications for the ERC2-RGS7C controller-integrated rod cylinder, including its load capacity and speed capabilities for different lead sizes, stroke lengths and weights. It also lists available cable types and lengths with pricing, and describes the I/O types that can be selected for the integrated controller. Dimensions and weights are provided by stroke length.
Iai rca2 ta5_c_specsheet
This document provides specifications for the RCA2-TA5C ROBO Cylinder. It includes details on the actuator such as the ball screw and positioning repeatability specifications. It also lists compatible controller options with descriptions and provides dimensional drawings of the actuator. Compatible controllers include the AMEC, ASEP, and ASEL which can be used for solenoid valves, positioning, and programmed operation respectively.
Recommended
Dyadics_ scll6_ Spec Sheet
The document introduces several mechatronics cylinder models from Dyadic Systems that are available starting at US$295. Key features highlighted include integrated motors, encoders, and drives for accuracy and long life. Models include low-cost, standard, and dust-proof options with various thrust capacities. Specification tables provide additional details on each model such as stroke length, speed, load capacity, and dimensions.
Macron mini6 56-specsheet
The Macron Mini 6-56 linear actuator:
- Is available in lengths up to 12 meters and can be customized to specifications.
- Features repeatability of +/- 0.001 inches and linear accuracy of +/- 0.03 inches.
- Can include optional components like sensors, wrap-around carts, and bellows.
Iai rca2 ta6_c_specsheet
The document provides specifications for the RCA2-TA6C ROBO Cylinder including:
1) It is a 65mm width cylinder with a ball screw drive and strokes from 25mm to 150mm in 25mm increments.
2) It has compatible controllers that support incremental or absolute encoders and can operate with pulse train or serial communication inputs.
3) Dimensions and weights are provided for cylinders of different strokes.
Applimotion uto motor_kits_datasheet
This document provides information about UTO out-runner motor kits from UTO Motors. It describes the features of the UTO series direct drive motors, which include a wide range of diameters from 29mm to 533mm and optional windings, stator designs, back iron rings, and Hall device feedback. Tables provide specifications for sample UTO motors, including part numbers, electrical and mechanical specifications. The motors are sold and serviced by Electromate.
Huawei ar3260 datasheet
Huawei AR G3 AR3200 Series Integrated Enterprise Router (AR0M0036BA00) is the next generation enterprise-class routers based on Huawei proprietary Versatile Routing Platform (VRP) platform. Huawei AR3200 series router utilizes multi-Core CPU and non-blocking switching structure to provide industry-leading performance and extensibility to support requirements of network development.
AAV or EFV iteration 2nd AntiAircraft vehicle based on MTVR
This document summarizes the specifications of an antiaircraft vehicle based on the Medium Tactical Vehicle Replacement (MTVR) platform. It has a universal combat module with an antiaircraft vehicle turret that contains two 40mm automatic cannons, two 120mm missile launchers, four 76/155mm missile launchers, and two containers with vertical missile launchers. The total weight is over 11,000 kg including the equipped crew, turret, launchers, missiles, cannons, and additional equipment. Dimensions and specifications are provided for the universal combat module, turret, and vertical missile launcher containers. It was designed by Andrey F Engineer.
Iai erc2 rgs7_c_specsheet
This document provides specifications for the ERC2-RGS7C controller-integrated rod cylinder, including its load capacity and speed capabilities for different lead sizes, stroke lengths and weights. It also lists available cable types and lengths with pricing, and describes the I/O types that can be selected for the integrated controller. Dimensions and weights are provided by stroke length.
Iai rca2 ta5_c_specsheet
This document provides specifications for the RCA2-TA5C ROBO Cylinder. It includes details on the actuator such as the ball screw and positioning repeatability specifications. It also lists compatible controller options with descriptions and provides dimensional drawings of the actuator. Compatible controllers include the AMEC, ASEP, and ASEL which can be used for solenoid valves, positioning, and programmed operation respectively.
QuickSilver Controls QCI-DS008 QCI-A23
This document summarizes specifications for nine motor models from QuickSilver Controls, including maximum speed, torque, power, weight, and temperature range. It provides torque-speed curves and details on the encoder, electrical interface, mechanical dimensions, and environmental specifications of the motors. The motors are designed to operate with QuickSilver's SilverLode motor controllers and drivers.
AAV or EFV iteration 2nd Infantry Fighting Amphibious Modular Vehicle 2 30 - ...
Infantry Fighting Amphibious Modular Vehicle 2 30 - 38 t with 17 - 23 Troopers based on Multipurpose Amphibious Modular Vehicle (MAMV20-40)
Iai rca a5_r_specsheet
The document provides specifications for the RCA ROBO Cylinder actuator including:
1) It uses a 52mm width 24V servo motor and ball screw drive system.
2) It lists the load capacity, stroke length, maximum speed, and dimensions for strokes between 50-200mm.
3) It describes the compatible controller options for operating the actuator including integrated, pulse train input, serial communication, and program control types.
Npm scr 75_specsheet
The document describes the Nippon Pulse SCR-075 nanopositioning stage, which integrates a linear slide guide, encoder, and linear shaft motor. The linear shaft motor offers higher resolution, speed, and continuous force compared to stepper or piezo motors. The stage is available in travel lengths of 50, 100, and 150mm. It provides high accuracy, repeatability, and load capacity. Customizable linear shaft motors and driver electronics are included to operate the stage.
Ls catalog thiet bi dien mms e_0901_dienhathe.vn
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Torque systems ms800_specsheet
The MS800 linear actuator can accurately position loads up to 800 lbs and move at speeds up to 30 in/sec, making it suitable for replacing pneumatic or hydraulic actuators. It uses either a DC brush or AC brushless motor and has a stainless steel translation tube and wiper seal for long-term, trouble-free operation. It is available in various stroke lengths and mounting configurations.
Macron belt drive50_specsheet
This document provides specifications for the Macron Single Belt Drive 50 mechanical belt drive system. It can be used with an external guide bearing system for linear motion up to 250 feet in length. Key features include a steel reinforced polyurethane timing belt, extruded aluminum actuator body with T-slots for mounting, and a precision machined shafted pulley and housing for zero backlash belt-to-pulley synchronization. Standard components include a NEMA 34 or 42 motor mount adapter and shafted pulley. Optional components include stainless steel materials and various beam size options.
Iai rca a4_r_specsheet
The document provides specifications for the RCA-A4R ROBO Cylinder actuator including its dimensions, weight, load capacity, speed, stroke length, encoder types, motor options, compatible controllers, and cable options. It describes the actuator configuration naming convention and provides tables of its specifications based on stroke length.
Huawei s9300 terabit routing switch
The Huawei S9300 is a terabit routing switch that comes in three models - S9303, S9306, and S9312 - supporting different numbers of line processing units. It provides Fast Ethernet, Gigabit Ethernet, 10GE and 40GE interfaces for access, aggregation, and transmission across metro area networks. The switch chassis dimensions and structures vary depending on the model and whether cable management frames are installed.
Iai rca sa5-c_specsheet
This document provides specifications for RCA ROBO Cylinder actuators including:
1) Load and speed capabilities based on stroke length and lead size.
2) Dimensions and weights that vary depending on stroke length.
3) A list of compatible controllers that can operate the actuators including their input voltages and positioning capabilities.
Iai rcs3 ct8 c-cj0210-1a-ust-1-0114
The document describes two high-speed actuator models, the RCS3-CT8C and RCS3-CTZ5C. The CT8C achieves maximum speeds of 2500mm/s and acceleration of 3.2G, reducing cycle times by 50% compared to existing models. The CTZ5C achieves 883mm/s and 3.2G acceleration. Both support single-axis and multi-axis controllers and can be combined for high-speed part transfer applications.
Iai erc2 rgd7_c_specsheet
This document provides specifications for the ERC2-RGD7C pulse motor cylinder, including its load capacity and speed capabilities for different lead sizes, controller options, cable types, and dimensions and weights for various stroke lengths. It notes that load capacity decreases at higher speeds due to the pulse motor characteristics and provides graphs showing this relationship. It also lists notes for selecting the appropriate model based on the desired stroke, speed, and load capacity.
M228 m229 precision_actuator
The document describes the M-228 and M-229 series linear actuators from PI. It provides the following key details:
- The actuators provide travel ranges of 10mm or 25mm using high-resolution stepper motors, and can push or pull loads up to 80N.
- Models with gearhead/stepper motor combinations offer the same stroke in a more compact package.
- Features include a non-rotating tip, limit and reference switches, and mechanical position display.
- Advantages of the non-rotating tip design are listed.
25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...
25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...Jacton Electromechanical Co.,Ltd
The document describes 25kn load capacity machine screw jacks with 300mm stroke that are used in continuous sandwich panel laminating machines for raising and lowering caterpillar plates. It provides details on two models, the JTW-2.5T-IS-300-H-III-C-PP and JTC25-IS-500-H-I-C-PP, which have load capacities of 2.5 tons and 25kN respectively. It also includes links to the company's website pages on various screw jack products and related parts.Macron belt drive12_specsheet
This document provides specifications for the Macron Single Belt Drive 12 mechanical belt drive system. The belt drive can be customized with lengths up to 20 feet and is used in conjunction with an external guide bearing system. It features a corrosion resistant aluminum body with T-slots for mounting, a steel reinforced polyurethane timing belt, and a shafted pulley machined from one piece of stress proof steel to maintain zero backlash. Optional components include stainless steel materials and different motor mounting and beam size options.
Hyster a217 (n30 fr) forklift service repair manual
This document provides specifications and repair information for service on lift truck frames. It lists the basic components of the frame, including mounts for the mast, steering, electrical, hydraulic, and door/floor plate parts. Procedures are provided for replacing load wheels in the base arms and removing/replacing covers, panels and plates on the frame. The overhead guard fastens to the mast and caster is part of the steering axle assembly. Very little other repair is usually needed for the frame itself.
Macron dual belt_drivelinear_actuator_specsheet
The document provides specifications for the Macron dual belt drive linear actuator including:
- It can be customized to lengths up to 76.2 meters and is available with optional sensors, motor mounts, and spline or shafted pulleys.
- Key specifications include a repeatability of +/- 0.001 in, maximum speed of 300 in/sec, and pulley diameter of 47.75 mm.
- Shipping weights vary from 29 lbs for the first meter of travel to 11 lbs for each additional meter.
Macron 14z axis_specsheet
The document provides specifications for the Macron 14 Z-Axis linear actuator. It can be customized for lengths up to 6 meters and is available with optional dual belt systems and sensors. Standard units have NEMA 23, 34, or 42 motor mounts but other sizes are optional. Dimensions, load capacities, pulley details, maximum speed and acceleration are listed. Shipping weights vary by travel length.
Macron 6 linear actuator_specsheet
The Macron 6 linear actuator can be customized with lengths up to 76.2 meters. It features repeatability of +/- 0.001 inches and accuracy of +/- 0.005 inches per 36 inches. It has a maximum speed of 400 inches per second and can provide acceleration exceeding 9 G's. The actuator uses a belt drive system and NEMA sized motors can be mounted in standard or custom configurations.
Macron mini6 28-specsheet
The Macron Mini 6-28 linear actuator is available in lengths up to 12 meters and features a NEMA 23 or 34 motor mounting. It has a repeatability of +/- 0.001 inches and accuracy of +/- 0.003 inches per 36 inches of travel. Additional options include sensors, extra carts, bellows, and a wrap-around cart. The actuator has a maximum speed of 200 inches per second and acceleration exceeding 5 G's.
Macron 14 specsheet
Macron Dynamics, Inc. manufactures the Macron 14 linear actuator. The actuator is available in lengths up to 76.2 meters and can be customized with options like dual belt systems, extended carts, sensors, and various motor mounts. It has a repeatability of +/- 0.001 inches, maximum speed of 400 inches per second, and can handle payloads horizontally and vertically as specified by the customer. Standard units ship with NEMA 23, 34, or 42 motor mounts but other sizes are available as options.
Macron rail linearactuator_specsheet
The document provides specifications for Macron Rail linear actuators. It describes features such as customizable lengths up to 76 meters and fast turnaround on standard units. Optional components include sensors, dual belts, and bellows. Dimensional data and load capacity details are given, noting capacities are customizable to customer specifications. Contact information is provided for engineering assistance.
More Related Content
What's hot
QuickSilver Controls QCI-DS008 QCI-A23
This document summarizes specifications for nine motor models from QuickSilver Controls, including maximum speed, torque, power, weight, and temperature range. It provides torque-speed curves and details on the encoder, electrical interface, mechanical dimensions, and environmental specifications of the motors. The motors are designed to operate with QuickSilver's SilverLode motor controllers and drivers.
AAV or EFV iteration 2nd Infantry Fighting Amphibious Modular Vehicle 2 30 - ...
Infantry Fighting Amphibious Modular Vehicle 2 30 - 38 t with 17 - 23 Troopers based on Multipurpose Amphibious Modular Vehicle (MAMV20-40)
Iai rca a5_r_specsheet
The document provides specifications for the RCA ROBO Cylinder actuator including:
1) It uses a 52mm width 24V servo motor and ball screw drive system.
2) It lists the load capacity, stroke length, maximum speed, and dimensions for strokes between 50-200mm.
3) It describes the compatible controller options for operating the actuator including integrated, pulse train input, serial communication, and program control types.
Npm scr 75_specsheet
The document describes the Nippon Pulse SCR-075 nanopositioning stage, which integrates a linear slide guide, encoder, and linear shaft motor. The linear shaft motor offers higher resolution, speed, and continuous force compared to stepper or piezo motors. The stage is available in travel lengths of 50, 100, and 150mm. It provides high accuracy, repeatability, and load capacity. Customizable linear shaft motors and driver electronics are included to operate the stage.
Ls catalog thiet bi dien mms e_0901_dienhathe.vn
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Torque systems ms800_specsheet
The MS800 linear actuator can accurately position loads up to 800 lbs and move at speeds up to 30 in/sec, making it suitable for replacing pneumatic or hydraulic actuators. It uses either a DC brush or AC brushless motor and has a stainless steel translation tube and wiper seal for long-term, trouble-free operation. It is available in various stroke lengths and mounting configurations.
Macron belt drive50_specsheet
This document provides specifications for the Macron Single Belt Drive 50 mechanical belt drive system. It can be used with an external guide bearing system for linear motion up to 250 feet in length. Key features include a steel reinforced polyurethane timing belt, extruded aluminum actuator body with T-slots for mounting, and a precision machined shafted pulley and housing for zero backlash belt-to-pulley synchronization. Standard components include a NEMA 34 or 42 motor mount adapter and shafted pulley. Optional components include stainless steel materials and various beam size options.
Iai rca a4_r_specsheet
The document provides specifications for the RCA-A4R ROBO Cylinder actuator including its dimensions, weight, load capacity, speed, stroke length, encoder types, motor options, compatible controllers, and cable options. It describes the actuator configuration naming convention and provides tables of its specifications based on stroke length.
Huawei s9300 terabit routing switch
The Huawei S9300 is a terabit routing switch that comes in three models - S9303, S9306, and S9312 - supporting different numbers of line processing units. It provides Fast Ethernet, Gigabit Ethernet, 10GE and 40GE interfaces for access, aggregation, and transmission across metro area networks. The switch chassis dimensions and structures vary depending on the model and whether cable management frames are installed.
Iai rca sa5-c_specsheet
This document provides specifications for RCA ROBO Cylinder actuators including:
1) Load and speed capabilities based on stroke length and lead size.
2) Dimensions and weights that vary depending on stroke length.
3) A list of compatible controllers that can operate the actuators including their input voltages and positioning capabilities.
Iai rcs3 ct8 c-cj0210-1a-ust-1-0114
The document describes two high-speed actuator models, the RCS3-CT8C and RCS3-CTZ5C. The CT8C achieves maximum speeds of 2500mm/s and acceleration of 3.2G, reducing cycle times by 50% compared to existing models. The CTZ5C achieves 883mm/s and 3.2G acceleration. Both support single-axis and multi-axis controllers and can be combined for high-speed part transfer applications.
Iai erc2 rgd7_c_specsheet
This document provides specifications for the ERC2-RGD7C pulse motor cylinder, including its load capacity and speed capabilities for different lead sizes, controller options, cable types, and dimensions and weights for various stroke lengths. It notes that load capacity decreases at higher speeds due to the pulse motor characteristics and provides graphs showing this relationship. It also lists notes for selecting the appropriate model based on the desired stroke, speed, and load capacity.
M228 m229 precision_actuator
The document describes the M-228 and M-229 series linear actuators from PI. It provides the following key details:
- The actuators provide travel ranges of 10mm or 25mm using high-resolution stepper motors, and can push or pull loads up to 80N.
- Models with gearhead/stepper motor combinations offer the same stroke in a more compact package.
- Features include a non-rotating tip, limit and reference switches, and mechanical position display.
- Advantages of the non-rotating tip design are listed.
25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...
25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...Jacton Electromechanical Co.,Ltd
The document describes 25kn load capacity machine screw jacks with 300mm stroke that are used in continuous sandwich panel laminating machines for raising and lowering caterpillar plates. It provides details on two models, the JTW-2.5T-IS-300-H-III-C-PP and JTC25-IS-500-H-I-C-PP, which have load capacities of 2.5 tons and 25kN respectively. It also includes links to the company's website pages on various screw jack products and related parts.Macron belt drive12_specsheet
This document provides specifications for the Macron Single Belt Drive 12 mechanical belt drive system. The belt drive can be customized with lengths up to 20 feet and is used in conjunction with an external guide bearing system. It features a corrosion resistant aluminum body with T-slots for mounting, a steel reinforced polyurethane timing belt, and a shafted pulley machined from one piece of stress proof steel to maintain zero backlash. Optional components include stainless steel materials and different motor mounting and beam size options.
Hyster a217 (n30 fr) forklift service repair manual
This document provides specifications and repair information for service on lift truck frames. It lists the basic components of the frame, including mounts for the mast, steering, electrical, hydraulic, and door/floor plate parts. Procedures are provided for replacing load wheels in the base arms and removing/replacing covers, panels and plates on the frame. The overhead guard fastens to the mast and caster is part of the steering axle assembly. Very little other repair is usually needed for the frame itself.
What's hot (16)
AAV or EFV iteration 2nd Infantry Fighting Amphibious Modular Vehicle 2 30 - ...
AAV or EFV iteration 2nd Infantry Fighting Amphibious Modular Vehicle 2 30 - ...
25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...
25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...
Hyster a217 (n30 fr) forklift service repair manual
Hyster a217 (n30 fr) forklift service repair manual
Similar to Macron single beltdrivelinear_actuator_specsheet
Macron dual belt_drivelinear_actuator_specsheet
The document provides specifications for the Macron dual belt drive linear actuator including:
- It can be customized to lengths up to 76.2 meters and is available with optional sensors, motor mounts, and spline or shafted pulleys.
- Key specifications include a repeatability of +/- 0.001 in, maximum speed of 300 in/sec, and pulley diameter of 47.75 mm.
- Shipping weights vary from 29 lbs for the first meter of travel to 11 lbs for each additional meter.
Macron 14z axis_specsheet
The document provides specifications for the Macron 14 Z-Axis linear actuator. It can be customized for lengths up to 6 meters and is available with optional dual belt systems and sensors. Standard units have NEMA 23, 34, or 42 motor mounts but other sizes are optional. Dimensions, load capacities, pulley details, maximum speed and acceleration are listed. Shipping weights vary by travel length.
Macron 6 linear actuator_specsheet
The Macron 6 linear actuator can be customized with lengths up to 76.2 meters. It features repeatability of +/- 0.001 inches and accuracy of +/- 0.005 inches per 36 inches. It has a maximum speed of 400 inches per second and can provide acceleration exceeding 9 G's. The actuator uses a belt drive system and NEMA sized motors can be mounted in standard or custom configurations.
Macron mini6 28-specsheet
The Macron Mini 6-28 linear actuator is available in lengths up to 12 meters and features a NEMA 23 or 34 motor mounting. It has a repeatability of +/- 0.001 inches and accuracy of +/- 0.003 inches per 36 inches of travel. Additional options include sensors, extra carts, bellows, and a wrap-around cart. The actuator has a maximum speed of 200 inches per second and acceleration exceeding 5 G's.
Macron 14 specsheet
Macron Dynamics, Inc. manufactures the Macron 14 linear actuator. The actuator is available in lengths up to 76.2 meters and can be customized with options like dual belt systems, extended carts, sensors, and various motor mounts. It has a repeatability of +/- 0.001 inches, maximum speed of 400 inches per second, and can handle payloads horizontally and vertically as specified by the customer. Standard units ship with NEMA 23, 34, or 42 motor mounts but other sizes are available as options.
Macron rail linearactuator_specsheet
The document provides specifications for Macron Rail linear actuators. It describes features such as customizable lengths up to 76 meters and fast turnaround on standard units. Optional components include sensors, dual belts, and bellows. Dimensional data and load capacity details are given, noting capacities are customizable to customer specifications. Contact information is provided for engineering assistance.
Kollmorgen nema23 conventional_hybrid_specsheet
This document provides specifications for general purpose conventional hybrid stepper motors in NEMA 23 frame sizes. It includes torque, current, resistance and other ratings in tables for motors with 1 and 2 rotor stacks from the H and E series. The E series motors feature Sigmax technology for increased torque. Options like connections, encoders, and shaft configurations are also discussed.
Iai rca2 sa6_r_specsheet
This document provides specifications for the RCA2-SA6R ROBO Cylinder. It includes details on (1) maximum speeds at different strokes, (2) load capacities based on 0.3G acceleration, and (3) compatible controller options for operating the cylinder. Dimensional drawings and specifications for stroke lengths, loads, speeds, and other performance characteristics are also provided.
Iai rca2 ta5_r_specsheet
The document provides specifications for the RCA2 ROBO Cylinder actuator including:
(1) It has a ball screw drive system and works with various compatible controllers like the AMEC and ASEP.
(2) The load capacity depends on the lead and operation acceleration, with allowable load moments also specified.
(3) Dimensions and other technical details are provided for actuator selection and integration into systems.
Applied motion products si5580 datasheet
This document provides information on the Si5580 Programmable Step Motor Drive from Applied Motion Products, including its features, specifications, and recommended NEMA 23 and 34 stepper motors to use with the drive. The Si5580 allows software control of motor current, resolution, idle current reduction, and has 8 programmable inputs and 3 outputs. It can drive 4, 6, or 8 lead stepper motors and includes programming software.
Iai rca2 ta7_r_specsheet
This document provides specifications for the RCA2-TA7R ROBO Cylinder. It includes details about:
1) The maximum speed and load capacity depending on horizontal or vertical use.
2) Technical specifications for the ball screw drive system, positioning repeatability, load capacity, and operating conditions.
3) Dimensions and weights that vary depending on the stroke length.
Dyadics _scn4_ Spec Sheet
The document introduces several mechatronics cylinder models from Dyadic Systems for linear actuation. Key points:
- The cylinders range in price from $295 to $455 and can provide thrusts from 10kgF to 50kgF, with strokes from 50mm to 1,000mm.
- Features include programmable positioning, speed, acceleration, I/O signals and more.
- Dyadic claims its integrated motor, encoder and drive results in high accuracy, long life and low cost compared to other actuators.
- The document provides specifications for each cylinder model as well as an overview of available accessories and technical support contacts.
Electrocraft legacy catalog
This document provides specifications and information on ElectroCraft's G240 series of DC motors. The G240 series offers reliable performance for low voltage, lower torque applications such as printers, tape drives, and medical pumps. The motors have dynamically balanced armatures, rugged construction, and ball bearings for smooth operation. Performance specifications are provided for the 240, 241, 242, and 243 motor models, including torque, speed, size, and electrical data. Mounting dimensions and options are also shown.
Dyadics_ scn6_Spec Sheet
The Dyadic Systems Mechatronics Cylinder series is a versatile linear actuator system available from US$295. It integrates a motor, encoder, drive and program memory into a single package for high accuracy, long life and low cost. Models range from 10-50 kgf thrust and include standard and dust-proof options. This document provides an overview of the product specifications.
Iai ix scara_robot_1000_1200_specsheet
The document describes the IX-1200 SCARA robot. It has an arm length of 1200 mm, the largest among the manufacturer's SCARA robots. It can transfer payloads of up to 50 kg, one of the highest in its class. The robot has a small footprint relative to its large working range of 2400 mm. It also achieves high-speed transfer through a maximum operating speed of over 8000 mm/s.
Iai rca2 ta6_r_specsheet
This document provides specifications for the RCA2-TA6R ROBO Cylinder. It includes details about the ball screw and load capacity depending on acceleration. Tables list specifications such as stroke length, maximum speed, load capacity, and dimensions for different models. The document also discusses compatible controllers and provides their descriptions.
Iai rcs2 ss8_c_specsheet
1) The document provides specifications for the RCS2 ROBO Cylinder, including its dimensions, load capacity, speed capabilities at different strokes, compatible controllers, and cable options.
2) Important notes specify that maximum speed will decrease at longer strokes to prevent critical rotational speed, and that load capacity is based on 0.3G acceleration as the upper limit.
3) Compatible controllers include the SSEL, XSEL, and SCON models, which can control 1-6 axes and support positioning of up to 20,000 points with single or 3-phase power supply.
Emotron fdu vfx2-0-technical-catalogue_01-4948-01_en
The document provides technical details about AC drives from the Emotron VFX/FDU 2.0 product line for motor power ranges from 0.55 - 3000 kW at voltages from 230 - 690 V. It includes tables listing specifications for each model such as maximum output current, frame size, power ratings, and IP protection classes. Features highlighted are robust IP54 construction, integrated EMC filtering, direct torque control, integrated braking, removable control panels, and approvals including UL and DNV. The document also summarizes key features of the Emotron FDU 2.0 for pump and fan control applications focused on energy savings.
Applimotion uts motor_kits_datasheet
The document discusses UTS Slotless Zero Cogging Motor Kits from UTS Motors. The motors offer sinusoidal torque curves and zero cogging torque for smooth operation. They are available in a wide range of diameters from 29mm to 240mm. Optional features include hall device feedback, back iron rings, and custom windings. Technical specifications and part numbers for various motors in the UTS series are provided in a data table.
Dyadics scn5 datasheet
The document introduces several mechatronics cylinder models from Dyadic Systems for linear actuation. Key points:
- Models range from $295 to $695 and provide thrusts from 10-50kg with strokes from 50-300mm.
- Features include integrated motor, encoder and drive for precision; optimized screw and nut mechanism for accuracy and longevity.
- Models include basic, standard, dust-proof, and slider types for different environments and applications.
Similar to Macron single beltdrivelinear_actuator_specsheet (20)
Emotron fdu vfx2-0-technical-catalogue_01-4948-01_en
Emotron fdu vfx2-0-technical-catalogue_01-4948-01_en
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Recently uploaded (20)
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Macron single beltdrivelinear_actuator_specsheet
- 1. MACRON SINGLE BELT DRIVE LINEAR ACTUATOR i i --- .,. - ... CIII_ -- -- - - - -- -- -- --- -- ------- Features - Macron actuators are furnished to your specifications - Available in any length up to 76.2 meters (250 ft.) - Fast turnaround on all standard units Motor Mountini: (See Page 22) -Motor Mount Adapter -NEMA 23, 34 & 42 (standard) 48,56 & non-NEMA sizes (optional) - Spline Adapter - Shafted PulleyOptional - Sensors 40.0 [1.574 20.0 [0.787 ...-. ,.., co 111 .=. 106.1 [4.175 tIC! 8.8 [0.347m -TRAVEL + 127 [5.00] 250' W -...... 79.5 [3.130 71.6 [2.820 if 39.75 [1.565110 N 7.9 [.310...... N ~ ...-. ,.., 110 ,.., :. 111 0 ~ d m CD . .250THRU ~'BOREDINSETFORHEXNUT BOTHSIDES 3 PLACES ~ 9 !no I..... ~!n f(COx j:;)..... 8~ o cO 18 MACRON SINGLEBELT DRIVE- dimensional data l ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
- 2. -- MACRON SINGLE BELT DRIVE LINEAR ACTUATOR TECHNICAL DATA Specifications: Repeatability Linear Accuracy Breakaway Torque Belt Tensile Limit Belt Running Load TravelJRevolution Pulley Diameter Pulley Weight (each) Maximum Speed Acceleration Exceeding Motor Mount/Coupling +/- 0.001 in +/- 0.003 in 50oz-in 1750lbs o - 500lbs 150 mmlrev (5.906 in/rev) 47.75 mm (1.88 in) 9.50z 300 in/sec 5 G's NEMA 23, 34 & 42 (standard), 48,56 & non-NEMA sizes (optional) Shipping Weight First meter of travel Additional per meter 16 lbs 6lbs Load Capacities Dynamic Horizontal Static Horizontal To Customer Specifications To Customer Specifications Inertia Calculation 't -W values of actuators -weight of cart & hardware -weight of belt/meter of travel -weight of (two) pulleys weight TDB* lbs 0.938 Ibs 1.188lbs inertia TDB* lbs - in2 0.827 lbs - in2 0.524 lbs - in2 *Application Specific o For Multi-Axis Units and other specifications not listed, contact your local Distributor or Macron for Engineering Design assistance and quotations. 19 ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By: