Peer Attachment and Intention of Aggressive Behavior among School Childreniosrjce
This paper attempts to ascertain the relationship between peer attachment and intention of
aggressive behavior amongst school children. There are literatures related to peer attachment quality and its
effects on adjustment and development.However, relatively little attention has been paid to the relationship
between peer attachments and intention of aggressive behavior. Positive peer attachment, respectively, have
been viewed as protective factors, that prevent peers from engaging in intention of aggressive behaviors, like
violence, risky sexual behavior, and bullying.. While the negative aspect of peer insecure attachment from the
school which is associated with more problematic functioning including higher rates of emotional problems,
substance use, aggression and delinquency. In this study, respondentswere 426 school children (males 199 and
females 227) between 13-17 years old. Data were analyzed using descriptive statistics and Pearson correlation
and t-test for student’sage groups.Peer attachment was measured using inventory of parents and peer
attachment (IPPA) with respect to peer attachment and adolescent intention of aggressive behaviour. Findings
have revealed that over all respondents show that there is a significant positive relationship between peer
influences on intention of aggressive behaviour.And there is no significant difference in age group of the
respondents and intention of aggressive behaviour. Peer influence on intention of aggressive behaviour is high
which is peer to peer aggressive act within the school environment which the harm that is always intention to
cause injuries, and destroy.Thus, expressive support and attention should be extended not just to the victims of
intention of aggressive behaviour cases, but also to intimidators. Recommendation of the study centers on the
need to examine the reports from school counselors and peers that engage in intention of aggressive behaviour.
Professional Growth and Employee Engagement (Part 1)Stephen Shinnan
Professional growth, career growth, and feeling one makes a contribution are consistently the most important drivers of employee engagement in most organizations. Get these right, and you have a much better chance of having a high level of engagement. However, the quintessential challenge faced by most organizations in today’s day and age is that the traditional approaches to career have changed, and there just aren’t enough positions to satisfy all of that talent that need a promotion to stay engaged.
Join Norm Baillie-David as he discusses the role of professional growth in employee engagement, and shares how the most successful organizations are meeting this challenge head on. The results may surprise you!
The Key Challenge in Behavioural ResearchQualtrics
In this webinar, Dr. Esther Tippmann will explain the Common Methods Bias - a well-documented phenomenon observed in research based on self-reported measures.
We often use surveys in which respondents are asked about their perceptions, feelings, attitudes or beliefs. Under certain circumstances such self-reported data can suffer from severe quality issues. It is the aim of this webinar to introduce some of these and discuss effective survey design remedies.
After The Employee Engagement Survey: Now What? Best Practices in Communicati...Stephen Shinnan
The results are in. The presentation to the leadership team went well, and all eyes turn to you as the CEO utters those famous words: So, what are the next steps? You’ve been anticipating that, and have loads of questions:
How should we cascade the results to managers and staff? Is there are a right way and a wrong way? What are the best practices?
How do we go about action planning?
What should we focus on?
How do I deal with groups that don’t want to follow the organizational approach, i.e. they want to do their own thing?
How do I satisfy the people who don’t accept the organization’s results and think their group is different?
Join Norm Baillie-David, SVP Consulting, as he draws from numerous case studies and success stories to provide best practices in how to proceed after the survey to ensure that your survey investment is maximized and that you do the right things right to improve employee engagement in your organization.
Peer Attachment and Intention of Aggressive Behavior among School Childreniosrjce
This paper attempts to ascertain the relationship between peer attachment and intention of
aggressive behavior amongst school children. There are literatures related to peer attachment quality and its
effects on adjustment and development.However, relatively little attention has been paid to the relationship
between peer attachments and intention of aggressive behavior. Positive peer attachment, respectively, have
been viewed as protective factors, that prevent peers from engaging in intention of aggressive behaviors, like
violence, risky sexual behavior, and bullying.. While the negative aspect of peer insecure attachment from the
school which is associated with more problematic functioning including higher rates of emotional problems,
substance use, aggression and delinquency. In this study, respondentswere 426 school children (males 199 and
females 227) between 13-17 years old. Data were analyzed using descriptive statistics and Pearson correlation
and t-test for student’sage groups.Peer attachment was measured using inventory of parents and peer
attachment (IPPA) with respect to peer attachment and adolescent intention of aggressive behaviour. Findings
have revealed that over all respondents show that there is a significant positive relationship between peer
influences on intention of aggressive behaviour.And there is no significant difference in age group of the
respondents and intention of aggressive behaviour. Peer influence on intention of aggressive behaviour is high
which is peer to peer aggressive act within the school environment which the harm that is always intention to
cause injuries, and destroy.Thus, expressive support and attention should be extended not just to the victims of
intention of aggressive behaviour cases, but also to intimidators. Recommendation of the study centers on the
need to examine the reports from school counselors and peers that engage in intention of aggressive behaviour.
Professional Growth and Employee Engagement (Part 1)Stephen Shinnan
Professional growth, career growth, and feeling one makes a contribution are consistently the most important drivers of employee engagement in most organizations. Get these right, and you have a much better chance of having a high level of engagement. However, the quintessential challenge faced by most organizations in today’s day and age is that the traditional approaches to career have changed, and there just aren’t enough positions to satisfy all of that talent that need a promotion to stay engaged.
Join Norm Baillie-David as he discusses the role of professional growth in employee engagement, and shares how the most successful organizations are meeting this challenge head on. The results may surprise you!
The Key Challenge in Behavioural ResearchQualtrics
In this webinar, Dr. Esther Tippmann will explain the Common Methods Bias - a well-documented phenomenon observed in research based on self-reported measures.
We often use surveys in which respondents are asked about their perceptions, feelings, attitudes or beliefs. Under certain circumstances such self-reported data can suffer from severe quality issues. It is the aim of this webinar to introduce some of these and discuss effective survey design remedies.
After The Employee Engagement Survey: Now What? Best Practices in Communicati...Stephen Shinnan
The results are in. The presentation to the leadership team went well, and all eyes turn to you as the CEO utters those famous words: So, what are the next steps? You’ve been anticipating that, and have loads of questions:
How should we cascade the results to managers and staff? Is there are a right way and a wrong way? What are the best practices?
How do we go about action planning?
What should we focus on?
How do I deal with groups that don’t want to follow the organizational approach, i.e. they want to do their own thing?
How do I satisfy the people who don’t accept the organization’s results and think their group is different?
Join Norm Baillie-David, SVP Consulting, as he draws from numerous case studies and success stories to provide best practices in how to proceed after the survey to ensure that your survey investment is maximized and that you do the right things right to improve employee engagement in your organization.
E' uscito il il nuovo numero della rivista S Forme, bimestrale dedicato alle pavimentazioni e ai rivestimenti innovativi.
Potrai trovare le ultime novità sui prodotti, i lavori realizzati in tutti Italia da personale qualificato e tante altre novità su corsi di formazione e sul mercato dell'edilizia.
Scarica gratuitamente la rivista: http://www.sirio-group.it/images/stories/cataloghi/sirioforme_4.pdf
massimiliano nowak CALDIC ITALIA s.r.l.QUANDO IL CEMENTO DIVENTA ARTE. Più av...infoprogetto
Caldic Italia commercializza specialità, atte alla realizzazione di manufatti cementizi con inimitabile cura dei particolari, senza armatura, dai minimi ai massimi spessori.
Questi sono formulati rigorosamente a base acqua che si pennellano, si spruzzano, si plasmano, si colano, per oggetti performanti e duraturi.
Jesmonite è un prodotto in polvere specifico per la realizzazione di manufatti artistici e di elementi di decoro edile di basso spessore, con forte caratterizzazione di particolari riprodotti da stampo.
Duropp è un additivo per impasti cementizi, che esalta la plasmabilità e permette di realizzare opere di arredo urbano o particolari edili di grande pregio anche precolorati, fino a grandi spessori autoportanti.
Stone CAP di Settef per la ristrutturazione della facciata di una villa anni ...Settef
Stone CAP effetto Travertino è stato scelto per le sue caratteristiche estetiche e di performance per il restauro della facciata di una villa anni '50 di Rimini
arteMURI è la linea colori e rivestimenti di Fornaci Calce Grigolin: grazie a questi innovativi prodotti di altissima qualità e livello tecnologico avanzato, l’azienda si propone come unico interlocutore per l’esecuzione di un intero ciclo di intervento, dai prodotti di fondo a quelli di finitura.
arteMURI è la linea colori e rivestimenti di Fornaci Calce Grigolin: grazie a questi innovativi prodotti di altissima qualità e livello tecnologico avanzato, l’azienda si propone come unico interlocutore per l’esecuzione di un intero ciclo di intervento, dai prodotti di fondo a quelli di finitura.
arch. Fabio Coracin, studio Fedro AA Associatiinfoprogetto
Quartiere ecosostenibile a basso costo e basso consumo: edifici ad alto comfort abitativo ed elevate prestazioni energetiche per un intervento di edilizia economica e popolare
2. CHI È LAPITEC®
Lapitec S.p.A. rappresenta l’eccellenza italiana in un settore dove l’Italia è leader indiscusso al mondo: il materiale
naturale agglomerato.
Grazie alla partnership tecnologica con la società Breton S.p.A., azienda leader mondiale nel settore degli impianti
per la produzione della pietra composita, che ha sviluppato la tecnologia e il know-how esclusivi, Lapitec® è un
prodotto naturale sinterizzato innovativo, dalle caratteristiche tecniche, dimensionali ed estetiche impareggiabili.
2015 vers. 011
3. CHE COSA È LAPITEC®
Lapitec® è un materiale naturale, sinterizzato*, a “tutta massa” composto al 100% da minerali compattati assieme
attraverso l’esclusiva tecnologia sviluppata da Breton S.p.a.
Lapitec® combina la forza del minerale sinterizzato con le proprietà, l’eleganza, i colori naturali e le finiture tipiche
della pietra naturale adatte ad ogni ambiente.
Lapitec® è fornito in lastre 3.365x1.500 mm con spessori calibrati a 12, 20 e 30 mm.
* Sinterizzazione: consiste nella compattazione e trasformazione di materiali ridotti in polveri in un composto
indivisibile. Tale trattamento termico viene svolto ad una temperatura inferiore al punto di fusione del materiale.
Dettaglio Lapitec ®
2015 vers. 012
4. COLORI
Lapitec® riesce a creare oggi un valore aggiunto offrendo al mercato un prodotto unico dal punto di vista tecnico,
lavorabile come la pietra naturale, con performance impareggiabili, espressione del design più all’avanguardia e del
rispetto dei canoni estetici più classici.
10 colori monocromatici e 2 venati
Ebano Rosso Porfido Grigio Piombo Nero Antracite Arabescato Corallo Arabescato Perla
Bianco Polare Bianco Crema Avorio Grigio Cemento Sahara Tabacco
2015 vers. 014
5. NOVITÁ - COLORI
Si moltiplicano le soluzioni con i nuovi colori Lapitec®
Moca: nuance che mancava nella palette delle lastre in pietra sinterizzata Lapitec® e che esprime toni caldi e
mediterranei.
Artico: bianco chiarissimo, etereo nella sua purezza cromatica.
Michelangelo: base chiara all’interno della quale risaltano le venature
Moca Artico Arabescato Michelangelo
2015 vers. 014
Presentati in esclusiva a
6. COLLEZIONI
4 collezioni: Vesuvio, Fossil, Satin e Lux
Lapitec® non è quindi solo un’impresa o solo un prodotto, bensì la fusione di vantaggi competitivi esclusivi
attraverso una lunga ed accurata fase di ricerca e sviluppo guidata da tecnologie e know-how unici.
LuxSatinVesuvioFossil
2015 vers. 015
7. NOVITÁ - COLLEZIONI
Arena, Lithos e Dune: tre nomi, tre nuove emozioni tattili
Arena è una finitura piana e sabbiata, con una grana regolare che dona un naturale dinamismo a tutta la lastra.
Questa lavorazione dà un tono più chiaro ai colori, facendone risaltare tutta la ricchezza cromatica.
Dune evoca la sabbia del deserto. È una finitura morbida al tatto, con vibrazioni cromatiche da scoprire a ogni
riflesso di luce. L’effetto ottico è quello della pietra naturale spaccata, molto simile all’ardesia.
Lithos è una superficie finemente rugosa. L’effetto cromatico è stupefacente, perché crea tonalità tenui e naturali.
La lavorazione, con i suoi impercettibili avvallamenti, regala inoltre percezioni sempre nuove a ogni carezza.
LithosDuneArena
2015 vers. 015
Presentati in esclusiva a
8. NOVITÁ - SKYLINE
Skyline: una nuova collezione per architetti e progettisti
Skyline rivela nel nome la sua applicazione ideale: i rivestimenti esterni, ma anche le grandi superfici piane. È una
finitura strutturata, con una delicata ruvidezza tipo pergamena: una soluzione pronta per la posa, adatta a progetti,
dove il valore estetico si sposa con un’attenta ottimizzazione dei costi. La novità introdotta dall’azienda sarà
disponibile in tre colori – Crema, Cemento e Antracite – studiati per soddisfare i trend cromatici più importanti nel
mondo delle finiture degli edifici. Skyline è un progetto che porta nuove opportunità nelle scelte di architetti e
designer: la sua versatilità, infatti, mantiene le eccezionali caratteristiche tecniche e tecnologiche dell’intera gamma
Lapitec®.
Skyline
2015 vers. 015
Presentati in esclusiva a
9. TECNOLOGIA BIO-CARE
Lapitec® è GREEN sia nel processo di produzione, sia nel prodotto finito. Nessuna materia prima componente il
Lapitec® è ottenuta mediante processi di sintesi del petrolio. È un materiale completamente inerte che non rilascia
alcuna sostanza nell’ambiente in cui viene inserito.
Bio-Care è la tecnologia che conferisce a Lapitec® la proprietà disgregante e dilavante del pulviscolo atmosferico
organico e con effetto battericida, ottenuta inserendo una speciale forma di biossido di titanio (TiO2) nel processo
produttivo.
Interno stabilimento
2015 vers. 016
10. APPLICAZIONE A PARETE
► Personalizzazione dei formati
► Lavorabilità dei dettagli
► Lunga durata
► Manutenzione facilitata
► Completamente ingelivo
► Garantito a vita contro il viraggio colore
► Ecologico
► Massima resistenza al fuoco
Esterno stabilimento Libertà progettuale Particolare imbotto
2015 vers. 017
11. PROGETTO - Lapitec S.p.A., esterno stabilimento
Date di Completamento: Gennaio 2015
Località: Vedelago (Tv) – Italy
Cliente: Lapitec S.p.A.
Tipo di lavoro: Pareti ventilate e continue
Direttore lavori: Arch. Francesco Pascali, Arch. Fabrizio Bettiol
Disegno fissaggio Disegno sistema di fissaggio Particolare sistema di fissaggio
APPLICAZIONI DA ESTERNO
2015 vers. 019
Struttura per il fissaggioParticolare sistema di fissaggioSistema di fissaggio parete ventilata
12. Progetto – Lapitec S.p.A. Nuovi Uffici
Data di Completamento: Febbraio 2014
Località: Vedelago (Tv) – Italy
Cliente: Lapitec S.p.A.
Tipo di lavoro: Rivestimento
Direttore lavori: Arch. Francesco Pascali
Rivestimento porta e parete Rivestimento porta Rivestimento porta e parete
APPLICAZIONE DA INTERNO
2015 vers. 0111
Rivestimento parete Rivestimento scale e pareteRivestimento scale e parete
13. APPLICAZIONE A PAVIMENTO
► Planarità e spessore costante
► Estetica (effetto continuo)
► Personalizzazione dei formati
Scale e pavimenti Pavimento interno
2015 vers. 0112
Pavimento esterno
14. APPLICAZIONE PER ARREDAMENTO
► Lavorabilità del materiale
► Inattaccabilità dagli agenti chimici
► Inassorbenza
Esposizione Tavolo “Playstone” by DEDON
Philippe Starck
2015 vers. 0115
Tavolo “Seax”table by DEDON
Jean-Marie Massaud
15. ► Lavorabilità del materiale
► Massima resistenza agli acidi ed alcali
► Elevata resistenza all’abrasione profonda
► Massima resistenza al calore
Particolare top Particolare piano cucina by SNAIDERO Particolare lavorazione con ribasso lucido
PIANI CUCINA
2015 vers. 0117
Showroom cucinaParticolare lavorazione con ribasso lucido Cucina vincitrice Design Award 2014Particolare gocciolatoio piano cucina Cucina e parete attrezzata by MAISTRIParticolare cassetto
16. ► Possibilità di essere inciso come la pietra naturale
Particolare incisione Particolare incisione
INCISIONI
2015 vers. 0119
Particolare lastra con incisioniMeridianaParticolare lastra con incisioni
17. I PLUS
2015 vers. 0120
• Lapitec® è resistente agli acidi, alcali e solventi.
• Lapitec® è resistente
• Lapitec® ha un’elevata resistenza all’impatto
• Lapitec® non è infiammabile
• Lapitec® non è gelivo
• Lapitec® resitente ai raggi UV
• La superficie del Lapitec® è priva di pori quindi non assorbe, è anti macchia, è
igenica perché battericida, repellente alle muffe e facile da pulire
Lapitec® è un prodotto “eterno” che resiste agli effetti del tempo.
• Lapitec® è Bio-Care
• Lapitec® non ha differenza di tono tra lotti
• Lapitec® è anti-graffiti
• Lapitec® è anche anti-scivolo R13
18. 2015 vers. 0123
Il prodotto che il mondo
dell’archittettura stava cercando