LR- 0000012.PDF
•
0 likes•11 views
This document contains a parts list for a gas tank assembly with 27 items. It lists each part number, description, and quantity. It includes parts for the gas tank structure like strakes and ends, as well as pipes of various sizes, valves, flanges, and other fittings to connect the tank to pipes. The total weight of all parts is listed as 14673147.44.
Report
Share
Report
Share
Download to read offline
Recommended
Takeuchi tb153 fr compact excavator parts catalogue manual (serial no. 158300...
This document provides parts information for a Takeuchi TB153FR excavator with serial numbers 158300001-158300654. It includes exploded diagrams and lists of parts for the lower frame, shoe guide, center guide, crawler belts for different serial number ranges, and carrier roller. The parts lists include part numbers, descriptions, quantities, and serial number ranges for different components.
004.STC.001.PDF
This document provides a bill of materials and exploded view diagram for a steam collector. It includes 29 items such as pipes, valves, flanges, gaskets, and supports. The diagram shows how the components connect and assemble to allow steam expansion from a collector pipe to the atmosphere.
SCTPTC
The document contains a sheet list table with 13 sheet numbers and titles. The sheet titles include exploded assembly, legs, various welded parts, casing pipe, and tire claw. Each sheet number is associated with engineering drawings created by SaskPolytech - Moose Jaw on March 31st, 2016.
Combined PDF Indy Rack
The document contains assembly drawings for a rack made of sheet metal parts. The drawings include bills of materials and detailed part drawings for the rack sub-assembly, base sub-assembly, and individual parts like the rack, supports, rails, and base plate. Fasteners including bolts, nuts, and washers are also specified for assembling the overall rack structure.
Facilities
The document lists various equipment and facilities at a factory, including reactors, separators, distillers, condensers, storage tanks, evaporators, filters, and environmental equipment. The equipment ranges in material from glass to various steel alloys and capacities range from under 1 cubic meter to over 200 cubic meters per minute. The majority of equipment is used for chemical production and processing.
LP-LP150-ASSBLY_F_Public
This document provides a parts list and assembly diagram for a 150 lower pump assembly with a flusher valve. It includes 12 items such as a cylinder body, o-ring, cylinder seat, stainless steel ball, piston assembly, intake screen, slip cap, screws, flusher body, seals, flusher piston, and flusher return spring. The piston assembly is also available made of a high temperature material.
10-13041-A3-U08-R03-P&ID FOR UTILITIES LINE
The document lists existing and new utility lines for Phase 9 of an expansion project including lines for cold water, compressed air, hot water, instrument air, nitrogen, and references piping and instrumentation drawings. It provides inventory of existing tanks and lines that will provide utilities to the new Phase 9 expansion, as well as new lines and tanks included in Phase 9. The expansion project is for a tank farm at a petrochemical jetty in Port Klang, Selangor, Malaysia.
Toto -technical_drawing_2008
This document provides specifications for various toilet models including:
- Close-coupled toilets with integrated cisterns from brands like NEOREST, EXCELSIOR, and VISION.
- Single bowl toilets with separate cisterns and flush valves from brands like OMNI, SONATA, and EURO.
- Squatting toilets and single bowl models for different applications.
- Specifications include closet bodies, tank trims, seats, stop valves, and other components for each model.
Recommended
Takeuchi tb153 fr compact excavator parts catalogue manual (serial no. 158300...
This document provides parts information for a Takeuchi TB153FR excavator with serial numbers 158300001-158300654. It includes exploded diagrams and lists of parts for the lower frame, shoe guide, center guide, crawler belts for different serial number ranges, and carrier roller. The parts lists include part numbers, descriptions, quantities, and serial number ranges for different components.
004.STC.001.PDF
This document provides a bill of materials and exploded view diagram for a steam collector. It includes 29 items such as pipes, valves, flanges, gaskets, and supports. The diagram shows how the components connect and assemble to allow steam expansion from a collector pipe to the atmosphere.
SCTPTC
The document contains a sheet list table with 13 sheet numbers and titles. The sheet titles include exploded assembly, legs, various welded parts, casing pipe, and tire claw. Each sheet number is associated with engineering drawings created by SaskPolytech - Moose Jaw on March 31st, 2016.
Combined PDF Indy Rack
The document contains assembly drawings for a rack made of sheet metal parts. The drawings include bills of materials and detailed part drawings for the rack sub-assembly, base sub-assembly, and individual parts like the rack, supports, rails, and base plate. Fasteners including bolts, nuts, and washers are also specified for assembling the overall rack structure.
Facilities
The document lists various equipment and facilities at a factory, including reactors, separators, distillers, condensers, storage tanks, evaporators, filters, and environmental equipment. The equipment ranges in material from glass to various steel alloys and capacities range from under 1 cubic meter to over 200 cubic meters per minute. The majority of equipment is used for chemical production and processing.
LP-LP150-ASSBLY_F_Public
This document provides a parts list and assembly diagram for a 150 lower pump assembly with a flusher valve. It includes 12 items such as a cylinder body, o-ring, cylinder seat, stainless steel ball, piston assembly, intake screen, slip cap, screws, flusher body, seals, flusher piston, and flusher return spring. The piston assembly is also available made of a high temperature material.
10-13041-A3-U08-R03-P&ID FOR UTILITIES LINE
The document lists existing and new utility lines for Phase 9 of an expansion project including lines for cold water, compressed air, hot water, instrument air, nitrogen, and references piping and instrumentation drawings. It provides inventory of existing tanks and lines that will provide utilities to the new Phase 9 expansion, as well as new lines and tanks included in Phase 9. The expansion project is for a tank farm at a petrochemical jetty in Port Klang, Selangor, Malaysia.
Toto -technical_drawing_2008
This document provides specifications for various toilet models including:
- Close-coupled toilets with integrated cisterns from brands like NEOREST, EXCELSIOR, and VISION.
- Single bowl toilets with separate cisterns and flush valves from brands like OMNI, SONATA, and EURO.
- Squatting toilets and single bowl models for different applications.
- Specifications include closet bodies, tank trims, seats, stop valves, and other components for each model.
Marine System Design
Design calculation for equipment and pipe sizing, heat ventilation system, cabling and electrical powering
MV 600 SS SP vapaorizer (cyroquip)
The document summarizes the installation and testing of a CO2 vaporizer. It describes how a forklift was used to position the vaporizer after a crane failed due to height limits. Drilling and shims were used to level the vaporizer on uneven ground. Railings were added for safety. Fittings including valves, tubing and connectors were selected and installed. Testing showed no leaks up to 75 barg pressure. The vaporizer is currently in operation with a pallet.
0102070018-21+24.PDF
The document appears to be engineering drawings and specifications for piping and instrumentation for a gas metering and safety controls system. It includes multiple pages with detailed drawings of pipe spools, lists of items and part numbers, general notes and requirements. Revisions are noted for changes to pipe routing and component locations.
Finished Setup Sheets
This document provides information about the setup of 10 stations for processing part number 182909. It lists the tools, equipment, and specifications for each station, including loaders, rough turning stations, and recess stations. Quantities, part numbers, tool offsets, and descriptions are provided for various collets, magazines, inserts, heads, and other tools used at each station in the multi-step manufacturing process.
12777 coastal single pages part31
This document provides information on trickle ventilators and canopies including part numbers, descriptions, finishes, dimensions and airflow specifications. It lists various models of ventilators and canopies with 265mm, 268mm, 350mm, 358mm, 410mm, and 413mm lengths and widths ranging from 18mm to 26mm. Models include TVP, TVF, and TVG units available in white and brown finishes. Airflow is noted to be 1700 cubic meters per hour for 2000mm units and 2700 cubic meters per hour for 4000mm units.
Screwdriver Grapics Drawing - S
This document is a parts list and drawing for a screwdriver. It lists 5 parts needed for the screwdriver including the handle, large bit, cup, smaller bit, and revised tube. The drawing shows the assembly of these parts into the screwdriver and includes notes specifying the drawing is proprietary and confidential property.
Flanges
This document contains specifications for Cameron flanges in various sizes, including the flange size, gasket size, inner diameter, bolt size, bolt circle diameter, and number of bolts. Flange sizes listed are 4-1/16 inch, 3-1/16 inch, 3-1/8 inch, and 2-9/16 inch, each available in 15K, 10K, and 5K pressure ratings. The specifications provide the necessary details to ensure proper fitting and installation of the Cameron flanges.
Tubo desplazado
The document reports defects from August to September 2013 related to misplaced tubes in various parts. It lists the part names, defect code, number of defects found, cost per piece and total cost. The most common defect was for tube parts with defect code 71 (misplaced tube). A total of over 1680 defects were reported over this period with total costs of over $16,000.
Deutz fahr agrotron k90 tractor parts catalogue manual
This document provides standard repair times for various components of Agrotron tractor models K 90, K 100, K 110 and K 120. It lists individual parts, their part numbers, quantities, descriptions and standard renewal times in days or hours for replacement. Renewal times may include time for removal and installation of related components. The document is divided into sections for different vehicle subassemblies and provides repair time guidelines for items like the engine filler cap, oil filler neck, crankcase breather, piston cooling nozzle and more.
780053
This patent document describes improvements to a refrigerant compressor. It provides a compressor with a crankcase that communicates with a cylinder and piston. It includes a check valve to allow gas to flow from the crankcase to an inlet, and an orifice to allow lubricant to return from the inlet to the crankcase when there is a pressure differential. The orifice is located such that the piston passes it on the compression stroke, creating lower pressure to draw oil back into the crankcase from a sump in the inlet settling chamber. This provides a simple way to return oil entrained in the refrigerant gas back to the compressor crankcase.
780053
This patent document describes improvements to a refrigerant compressor. It provides a compressor with a crankcase that communicates with a cylinder and piston. It includes a check valve to allow gas to flow from the crankcase to an inlet, and an orifice to allow lubricant to return from the inlet to the crankcase when there is a pressure differential. The orifice is located such that the piston passes it on the compression stroke, creating lower pressure to draw oil back into the crankcase from the inlet settling chamber. This provides a simple way to return oil entrained in the refrigerant gas back to the compressor crankcase.
780053
This patent document describes improvements to a refrigerant compressor. It provides a compressor with a crankcase that communicates with a cylinder and piston. It includes a check valve to allow gas to flow from the crankcase to an inlet, and an orifice to allow lubricant to return from the inlet to the crankcase when there is a pressure differential. The orifice is located such that the piston passes it on the compression stroke, creating lower pressure to draw oil from the inlet settling chamber back to the crankcase. This ensures adequate lubrication without depleting the oil supply.
POSTER-Design-ComparisonChart
Warrior, Bauer, Easton, Reebok, and CCM hockey stick blade patterns are summarized. Each blade is defined by its toe shape, curve location and degree, face shape, and lie number. The curve specifies where the blade bends from heel to toe and influences player style. The face can be neutral, slightly open, or open. Lie is the angle between shaft and ice, with lower numbers indicating a lower stance. Blade patterns are grouped by similar specifications to indicate comparable player profiles.
brochure_Canalta_Parts.pdf
This document provides information on replacement parts for Canalta orifice fittings, including:
- Parts for dual chamber and single chamber orifice fittings of various sizes
- Descriptions and materials for common parts across different fitting models
- Diagrams and part numbers for specific parts that vary by fitting size
- Information on quality control and specifications for parts to ensure reliability
ISV 3 PC trunnion ball valve SB600.5b-web(1)
International Standard Valve, Inc. manufactures forged construction trunnion mounted ball valves in sizes 2" through 56" for ASME Class 150-2500 pressure ratings. The document provides details on ISV's quality systems, pressure testing procedures, material specifications, design standards, and production capabilities for their Series BT3EU, BT3E, and BT3G ball valve models.
Kf ball-floating flangedseriesf-fe
This document provides information on KF Series F/FE flanged floating ball valves, including:
- The valves feature a unibody or two-piece bolted design and include anti-blowout stem, weather seal, actuator mounting pad, and other features.
- It lists the component parts for various valve classes and sizes.
- Dimensional data and specifications for the valves are also included.
Trunnion Mount Ball Valves For Industrial Pipelines
The ISV product line includes valve sizes ranging form 1/4" to 56" in pressure classes through 2500 and up to 10,000 psig working pressures with a large selection of body materials and trims.
Pipeline, Oil & Gas Service Ball Valves
API 6D and API 608, API 607 Firesafe with NACE compliance
2 & 3 piece trunion mounted ball valves
2 & 3 piece floating ball valves
Industrial Floating Ball Valves
API 608 / ASME B16.34, API 607 Firesafe with NACE compliance
2 & 3 piece flanged, SW, BW and NPT
Uni-body NPT
2 & 3 piece NPT industrial valves
Válvulas de bola - Ball Valves
Una válvula de bola, conocida también como válvula de esfera, es un mecanismo de llave de paso que sirve para regular el flujo de un fluido canalizado y se caracteriza porque el mecanismo regulador situado en el interior es una bola perforada.
A ball valve, also known as a spherical valve, is a stopcock mechanism used to regulate the flow of a piped fluid and is characterised by having a perforated ball inside as its regulating mechanism.
Product Catalog
This document provides technical specifications for various oil and gas drilling equipment made from AISI 4130 steel pipe and fittings by Seawave Offshore, including:
- Seamless pipe in various schedules and sizes that meet international standards for material properties and testing.
- High pressure manifold fittings in carbon manganese and alloy steels rated for maximum working pressures of 5,000-15,000 psi.
- API 6A certified products like flanges, studded blocks, and valves available in various pressure classes and temperature ratings.
LVF Stock List
The document lists stock quantities of various types of valves, including gate valves, globe valves, and check valves, in various sizes and materials. It provides part numbers, descriptions, and stock quantities for valves with threaded, socket weld, and flanged connections in class 150, 300 and 800 that are available from John Bell Pipeline. Contact information is also provided for inquiries.
Gemel valves itally dealers vardhman bearings
we at vardhman bearings are dealers for GEMEL itally valves in india , we stock and trader in all type of GEMEL valves , we stock series like SBF valves gemel valves .. sbt 2 way high pressure ball valve , GM high pressure ball valve , GN high pressure ball valve , GM1 high pressure ball valve gemel valve
GWC Valve International Forged Steel Gate, Globe, and Check
GWC Valve International produces a wide variety of Forged Steel Gate, Globe, and Check valves. Other available designs include y-pattern globe and check valves and cryogenic valves.
More Related Content
What's hot
Marine System Design
Design calculation for equipment and pipe sizing, heat ventilation system, cabling and electrical powering
MV 600 SS SP vapaorizer (cyroquip)
The document summarizes the installation and testing of a CO2 vaporizer. It describes how a forklift was used to position the vaporizer after a crane failed due to height limits. Drilling and shims were used to level the vaporizer on uneven ground. Railings were added for safety. Fittings including valves, tubing and connectors were selected and installed. Testing showed no leaks up to 75 barg pressure. The vaporizer is currently in operation with a pallet.
0102070018-21+24.PDF
The document appears to be engineering drawings and specifications for piping and instrumentation for a gas metering and safety controls system. It includes multiple pages with detailed drawings of pipe spools, lists of items and part numbers, general notes and requirements. Revisions are noted for changes to pipe routing and component locations.
Finished Setup Sheets
This document provides information about the setup of 10 stations for processing part number 182909. It lists the tools, equipment, and specifications for each station, including loaders, rough turning stations, and recess stations. Quantities, part numbers, tool offsets, and descriptions are provided for various collets, magazines, inserts, heads, and other tools used at each station in the multi-step manufacturing process.
12777 coastal single pages part31
This document provides information on trickle ventilators and canopies including part numbers, descriptions, finishes, dimensions and airflow specifications. It lists various models of ventilators and canopies with 265mm, 268mm, 350mm, 358mm, 410mm, and 413mm lengths and widths ranging from 18mm to 26mm. Models include TVP, TVF, and TVG units available in white and brown finishes. Airflow is noted to be 1700 cubic meters per hour for 2000mm units and 2700 cubic meters per hour for 4000mm units.
Screwdriver Grapics Drawing - S
This document is a parts list and drawing for a screwdriver. It lists 5 parts needed for the screwdriver including the handle, large bit, cup, smaller bit, and revised tube. The drawing shows the assembly of these parts into the screwdriver and includes notes specifying the drawing is proprietary and confidential property.
Flanges
This document contains specifications for Cameron flanges in various sizes, including the flange size, gasket size, inner diameter, bolt size, bolt circle diameter, and number of bolts. Flange sizes listed are 4-1/16 inch, 3-1/16 inch, 3-1/8 inch, and 2-9/16 inch, each available in 15K, 10K, and 5K pressure ratings. The specifications provide the necessary details to ensure proper fitting and installation of the Cameron flanges.
Tubo desplazado
The document reports defects from August to September 2013 related to misplaced tubes in various parts. It lists the part names, defect code, number of defects found, cost per piece and total cost. The most common defect was for tube parts with defect code 71 (misplaced tube). A total of over 1680 defects were reported over this period with total costs of over $16,000.
Deutz fahr agrotron k90 tractor parts catalogue manual
This document provides standard repair times for various components of Agrotron tractor models K 90, K 100, K 110 and K 120. It lists individual parts, their part numbers, quantities, descriptions and standard renewal times in days or hours for replacement. Renewal times may include time for removal and installation of related components. The document is divided into sections for different vehicle subassemblies and provides repair time guidelines for items like the engine filler cap, oil filler neck, crankcase breather, piston cooling nozzle and more.
780053
This patent document describes improvements to a refrigerant compressor. It provides a compressor with a crankcase that communicates with a cylinder and piston. It includes a check valve to allow gas to flow from the crankcase to an inlet, and an orifice to allow lubricant to return from the inlet to the crankcase when there is a pressure differential. The orifice is located such that the piston passes it on the compression stroke, creating lower pressure to draw oil back into the crankcase from a sump in the inlet settling chamber. This provides a simple way to return oil entrained in the refrigerant gas back to the compressor crankcase.
780053
This patent document describes improvements to a refrigerant compressor. It provides a compressor with a crankcase that communicates with a cylinder and piston. It includes a check valve to allow gas to flow from the crankcase to an inlet, and an orifice to allow lubricant to return from the inlet to the crankcase when there is a pressure differential. The orifice is located such that the piston passes it on the compression stroke, creating lower pressure to draw oil back into the crankcase from the inlet settling chamber. This provides a simple way to return oil entrained in the refrigerant gas back to the compressor crankcase.
780053
This patent document describes improvements to a refrigerant compressor. It provides a compressor with a crankcase that communicates with a cylinder and piston. It includes a check valve to allow gas to flow from the crankcase to an inlet, and an orifice to allow lubricant to return from the inlet to the crankcase when there is a pressure differential. The orifice is located such that the piston passes it on the compression stroke, creating lower pressure to draw oil from the inlet settling chamber back to the crankcase. This ensures adequate lubrication without depleting the oil supply.
POSTER-Design-ComparisonChart
Warrior, Bauer, Easton, Reebok, and CCM hockey stick blade patterns are summarized. Each blade is defined by its toe shape, curve location and degree, face shape, and lie number. The curve specifies where the blade bends from heel to toe and influences player style. The face can be neutral, slightly open, or open. Lie is the angle between shaft and ice, with lower numbers indicating a lower stance. Blade patterns are grouped by similar specifications to indicate comparable player profiles.
What's hot (13)
Deutz fahr agrotron k90 tractor parts catalogue manual
Deutz fahr agrotron k90 tractor parts catalogue manual
Similar to LR- 0000012.PDF
brochure_Canalta_Parts.pdf
This document provides information on replacement parts for Canalta orifice fittings, including:
- Parts for dual chamber and single chamber orifice fittings of various sizes
- Descriptions and materials for common parts across different fitting models
- Diagrams and part numbers for specific parts that vary by fitting size
- Information on quality control and specifications for parts to ensure reliability
ISV 3 PC trunnion ball valve SB600.5b-web(1)
International Standard Valve, Inc. manufactures forged construction trunnion mounted ball valves in sizes 2" through 56" for ASME Class 150-2500 pressure ratings. The document provides details on ISV's quality systems, pressure testing procedures, material specifications, design standards, and production capabilities for their Series BT3EU, BT3E, and BT3G ball valve models.
Kf ball-floating flangedseriesf-fe
This document provides information on KF Series F/FE flanged floating ball valves, including:
- The valves feature a unibody or two-piece bolted design and include anti-blowout stem, weather seal, actuator mounting pad, and other features.
- It lists the component parts for various valve classes and sizes.
- Dimensional data and specifications for the valves are also included.
Trunnion Mount Ball Valves For Industrial Pipelines
The ISV product line includes valve sizes ranging form 1/4" to 56" in pressure classes through 2500 and up to 10,000 psig working pressures with a large selection of body materials and trims.
Pipeline, Oil & Gas Service Ball Valves
API 6D and API 608, API 607 Firesafe with NACE compliance
2 & 3 piece trunion mounted ball valves
2 & 3 piece floating ball valves
Industrial Floating Ball Valves
API 608 / ASME B16.34, API 607 Firesafe with NACE compliance
2 & 3 piece flanged, SW, BW and NPT
Uni-body NPT
2 & 3 piece NPT industrial valves
Válvulas de bola - Ball Valves
Una válvula de bola, conocida también como válvula de esfera, es un mecanismo de llave de paso que sirve para regular el flujo de un fluido canalizado y se caracteriza porque el mecanismo regulador situado en el interior es una bola perforada.
A ball valve, also known as a spherical valve, is a stopcock mechanism used to regulate the flow of a piped fluid and is characterised by having a perforated ball inside as its regulating mechanism.
Product Catalog
This document provides technical specifications for various oil and gas drilling equipment made from AISI 4130 steel pipe and fittings by Seawave Offshore, including:
- Seamless pipe in various schedules and sizes that meet international standards for material properties and testing.
- High pressure manifold fittings in carbon manganese and alloy steels rated for maximum working pressures of 5,000-15,000 psi.
- API 6A certified products like flanges, studded blocks, and valves available in various pressure classes and temperature ratings.
LVF Stock List
The document lists stock quantities of various types of valves, including gate valves, globe valves, and check valves, in various sizes and materials. It provides part numbers, descriptions, and stock quantities for valves with threaded, socket weld, and flanged connections in class 150, 300 and 800 that are available from John Bell Pipeline. Contact information is also provided for inquiries.
Gemel valves itally dealers vardhman bearings
we at vardhman bearings are dealers for GEMEL itally valves in india , we stock and trader in all type of GEMEL valves , we stock series like SBF valves gemel valves .. sbt 2 way high pressure ball valve , GM high pressure ball valve , GN high pressure ball valve , GM1 high pressure ball valve gemel valve
GWC Valve International Forged Steel Gate, Globe, and Check
GWC Valve International produces a wide variety of Forged Steel Gate, Globe, and Check valves. Other available designs include y-pattern globe and check valves and cryogenic valves.
2-01-e-prv25-pressure-reducing-valves-dn15-25.pdf
The PRV25 series are direct acting pressure reducing valves designed to reduce steam, compressed air, water and other gases and liquids. They are compact with a bellows design and non-rising adjustment knob for durability. Models include carbon steel and stainless steel options with metal-to-metal or soft sealing. Sizes range from 1/2" to 1" with threaded or flanged connections. They are suitable for pressures up to 17 bar and temperatures up to 210°C, regulating pressure ranges from 0.14 to 8.6 bar.
Mecatraction - Cable Crimps, Connectors, Splices & Crimping Tools
Mecatraction - Cable Crimps, Connectors, Splices & Crimping Tools.
Founded in 1981, MECATRACTION quickly grew both in the domestic market and export markets. We are based in Pompadour, France, in premises of more than 8100 m2. MECATRACTION designs, develops and produces a complete range of components for industrial electrical connections.
MECATRACTION is a subsidiary of the Sicame group.
The Sicame group specializes in accessories for the transport and the transmission of electrical power.
MECATRACTION has forged a position for itself in many sectors of industry that demand know-how, precision and efficiency through the quality of our products and our capacity for innovation.
These sectors include the rail, automotive, aeronautic, space, nuclear, renewable energies, shipping and defence industries
A complete range of products:
Insulated and non insulated terminals
End sleeves
Earthing connections and mechanical connectors
Copper tubular lugs and butt connectors
Cable ties and accessories
Heat-shrink tubing
Tooling and accessories
Rmt Vm Presentation
This document provides information on ball valves and other valves from various steel mills, forging companies, and valve trading companies. It includes details on production capabilities, available materials, typical delivery times, example projects involving valves in various sizes and materials, and pictures of supplied valves. Certifications for the trading companies are also listed.
Piston Isolation Valves For Steam and Condensate
Spirax Sarco, leader in products and services for steam system management, released the PV4 and PV6 piston valves for isolation purposes. The valves are available in NPT and SW versions, from ½” to 2”. Bodies are available in forged carbon steel or forged stainless steel.
These valves are designed to Class 800 and provide tight shutoff, suitable for steam, condensate and other liquid systems.
GWC Valve International Flanged Floating Ball Valves
GWC Valve International Flanged Floating Ball Valves are designed, constructed, and tested according to API and ASME/ANSI Standards. Other
international standards including BS and Din available upon request.
GWC Valve International brochure for valves that we manufacture nationally and internationally.
GWC products are designed, engineered and manufactured to exceed your stringent process requirements.
GWC's Global Operations are licensed and certified to API-6D, API-6A, API-600, PED and ISO 9000.
Indthball
This document provides technical specifications for industrial threaded ball valves made of carbon steel and stainless steel. It includes unibody and two-piece designs with standard or seal welded ends. Dimensions, materials of construction, pressure ratings, flow coefficients and other specifications are provided for valve sizes ranging from 1/4" to 2". The document also outlines code numbers for product identification and lists optional accessories.
Mark 76 On/Off Control Valve
For applications where rapid transition from open to closed positions is warranted, the Mark 76 is a solid choice. Designed with a short stroke and straight through fluid path, the Mark 76 also incorporates other features to assure good service for process operations using on/off control.
ACTEON CATALOGUE
This document provides a catalogue of products and services related to process and line pipes. It includes summaries of carbon steel, alloy steel, stainless steel, and duplex pipes and tubes in various sizes and specifications. It also lists seamless and welded pipes, fittings and flanges made from carbon steel, alloy steel, and stainless steel. The document describes valves and actuators for gates, globes, butterflies, balls, plugs, and checks. It provides details on instrumentation for measuring pressure, temperature, and other process variables. Cryogenic valves and accessories are also included.
Stainless Steel Pipe Fittings Manufacturers
SEALEXCEL is a fast-growing manufacturing company in the field of design, development, production and marketing of high-quality valves and fittings for international and domestic markets, Since 1987.
https://www.sealexcel.com/pipe-fittings/
stainless pipe fittings, stainless steel pipe fittings manufacturers
Bubbler Method Liquid Tank Level Measurement Instruments
Measuring level of liquid in a tank or vessel can be accomplished in a number of ways, all of which require some arrangement of instrumentation to either infer the liquid level from the measurement of a related physical property, or directly deliver the liquid level visually using a scaled gauge arrangement. One indirect method of level measurement is the bubbler method, so named because it employs a purging gas that continually vents from the bottom of a tube extending into a tank of liquid. Through a simple apparatus, the level of a liquid can be inferred by the amount a back pressure exerted upon the gas flowing through the tube.
These instruments are what will be required to build a level measurement apparatus that uses the bubbler method.
Welder qualification
This document provides information on the essential variables and requirements for welder qualification according to ASME Section IX. It lists the key variables that must be specified for a welder qualification, including welding process, type, base metal, filler metal, and weld thickness limits. It also outlines the qualification requirements and limitations for weld position, diameter, progression, backing, and which filler and base metals a welder is qualified to use based on their test.
Similar to LR- 0000012.PDF (20)
Trunnion Mount Ball Valves For Industrial Pipelines
Trunnion Mount Ball Valves For Industrial Pipelines
GWC Valve International Forged Steel Gate, Globe, and Check
GWC Valve International Forged Steel Gate, Globe, and Check
Mecatraction - Cable Crimps, Connectors, Splices & Crimping Tools
Mecatraction - Cable Crimps, Connectors, Splices & Crimping Tools
GWC Valve International Flanged Floating Ball Valves
GWC Valve International Flanged Floating Ball Valves
Bubbler Method Liquid Tank Level Measurement Instruments
Bubbler Method Liquid Tank Level Measurement Instruments
LR- 0000012.PDF
- 1. 1 2 3 4 5 8 7 20 9 202327 27 ITEM NO. PART NUMBER DESCRIPTION QTY. 1 Gas Tank end 1 1 2 Gas Tank strake 1 Shell Plate 1 3 Gas Tank strake 2 1 4 Gas Tank strake 3 1 5 Tank end 2 1 6 Assem10 1 7 Gas Tank Saddle 1 1 8 Gas Tank Saddle 2 1 9 Flg. SO, NPS 24in, CLASS ANSI 300, RF 1 10 AssemN3-6 4 11 AssemN1-3 1 16 Slip On Flange 300-NPS3 1 17 Gate Valve (ASME B16.34) Flanged End, Class 300, NPS 3, RF 2 18 Gate Valve (ASME B16.34) Flanged End, Class 300, NPS 6, RF 1 19 Pipe_1-LR- 0000012 1 20 Pipe 24inch 40 3 21 Pipe 6 inch 40 4 22 Pipe 3inch 40 2 23 Slip On Flange 300-NPS24 2 24 Slip On Flange 150-NPS5 1 25 Slip On Flange 150-NPS6 2 26 pipe 4inch 40 2 27 sample-tank-07 2 28 Pipe_6-LR- 0000012 1 29 Pipe_7-LR- 0000012 1 30 Pipe_14-LR- 0000012 1 31 Pipe_18-LR- 0000012 1 32 Pipe_19-LR- 0000012 1 33 Pipe_23-LR- 0000012 1 34 Gasket 6inch 1 35 Gasket 5 inch 1 36 Pipe_28-LR- 0000012-001 1 B C D 1 2 A 321 4 B A 5 6 DRAWN L.Reythen CHK'D APPV'D MFG Q.A UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: DEBUR AND BREAK SHARP EDGES NAME SIGNATURE DATE MATERIAL: Material <not specified> DO NOT SCALE DRAWINGREVISION Title: Gas Tank Assembly DRWG NO. SCALE: 1:150 SHEET 1 OF 1 A4 C Item. No. L.Rey's Engineering Draughting. If in doubt ask Lawrence Reythen 0439020268 Client: Description: Finish: xxxx Weight: 14673147.44