The document is a cover letter and resume submitted by Lokesh H N for a job application.
1. Lokesh is submitting his resume and cover letter to explain his interest in joining the personnel manager's esteemed organization.
2. He has completed post-diploma training in tool design and diploma in tool and die making. He assures that if given a chance, he will work diligently to discharge his duties to the satisfaction of his superiors.
3. Lokesh presents himself as a result-oriented individual capable of performing in a high-pressure environment. He has over 6 years of experience in design engineering for plastic molds and press tools.
1. COVERING LETTER
FROM,
LOKESH H N
S/o Nanjaiah N
Shiva Parvathi Nilaya,
Near Krishnaiahna Katte,
Anitha Convent Road,
Malavalli Town & Taluk
Mandya District- 571 430
Mob: +91 9900797461
Email: hn.lokeshbattery@yahoo.com
TO,
THE PERSONNEL MANAGER
Respected Sir,
I am enclosing my resume as a first step in explaining my deep
interest to become part, grow and excel with your esteemed organization, thus offering my
candidature.
I have completed Post Diploma in Tool Design from “Govt. Tool Room & Training
Centre Mysore” Recognized by AICTE, and Diploma in Tool and Die Making from “Govt.
Tool Room & Training Centre Maddur” recognized by AICTE, I am enclosing here with my
Resume for your kind perusal, if you give me a chance to serve in your Esteem Organization,
I assure you sir, it would be my earnest endeavour to work with diligence to discharge my
duties to the at most satisfaction of my superiors.
I offer myself as a result oriented individual with a zeal to achieve and capable of
performing in high pressure environment. I will be obliging if you can consider my case
favourable. I will be readily available for attending interview, which may you desire and if
given a chance to serve you in suitable designation, I shall be sincere in all my efforts to the
prosperity of the company.
Looking forward to hearing from you.
Thanking You
Yours Sincerely,
LOKESH H N
2. CURRICULUM VITAE
LOKESH .H .N
Mobile: +919900797461
Email : hn.lokeshbattery@yahoo.com
CAREER OBJECTIVES:
Seeking a responsible career position, which will offer a high level of challenge,
responsibility and opportunity to contribute significantly to the growth of the organization
with experience on Tool Design, Product Design, Project Management, Documentation
Control & Implementation of Engineering Applications & as well as develop additional
skills.
EDUCATIONAL QUALIFICATION:
Qualification Institute/College Board/University
Year Of
Completion
Mark (%)
Post Diploma
in Tool Design
Govt. Tool Room &
Training Centre- Mysore
GT&TC 2010 70.03%
Diploma in
Tool & Making
Govt. Tool Room &
Training Centre- Maddur
GT&TC 2008 71.61 %
SSLC Anitha Convent- Malavalli KSEEB 2003 55.04 %
PROFESSIONAL PREFACE:
• Technically accomplished professional with nearly 6 years plus of experience in
Design Engineering (Plastic Injection Moulds & Press Tool Designs).
• Presently associated with DME India Pvt Ltd, Bangalore as a Design Engineer.
• Areas of expertise include CAD, CAM Software AutoCAD, SolidWorks, Unigraphics
NX, and Pro/ Engineer.
• Comprehensive knowledge of Manufacturing Processes and Supply Chain principles
of mechanical engineering.
• Sound knowledge of general Machining Techniques and various manufacturing
processes.
• Comprehensive knowledge of Product Lifecycle Management and computer-aided
engineering, GD&T.
• Familiar with industrial equipment and machinery, Materials, transport systems and
heating and cooling systems for Plastic Moulds.
• Knowledge of operating SAP.
PERSONAL QUALITIES:
• Good in Client Handling.
• Good in interpersonal skills.
3. • Dedicated to job
• Ability to motivate and engage
KEY RESPONSIBILITIES HANDLED:
• Responsible for complete Project of Plastic Injection Moulds or Press Tool Designs.
• Assigned to the tasks of selection of Materials & Machine & Machining Process.
• Assigned with the responsibilities of creating the 3D models, Dimensional Drawings,
Main Assembly Drawing, Part Drawings and the complete Bill of Materials for
Respective Projects.
• Responsible for analysing the incoming inquiries from the sales department, and
preparing accurate General Arrangement and Layout Drawings.
• Responsible for establishing the specifications for the material procurement and play
active role in helping the purchase dept. in developing these new materials.
• Responsible for tasks of analysing the components to ensure design criteria and
specific requirements.
• Assigned to the tasks of planning, conducting and providing guidance to staff in areas
of Tool Design and Tool Development.
• Handled the job of checking and correcting the complete drawings of components,
Bill of Materials (BOM) & machines before it is released to manufacturing.
• Assigned with the task of studying International Standard and finding the Equivalent
Indian Standards.
• Involved in training of new Engineers joining the Design Department.
• Active member of Special Material Development team and Continuous Improvement
Team.
• Assigned with the task of checking the design made by trainees and approving the
same.
• Assigned with the task of introducing “5S Principles” in design department.
• Solving problems in the shop floor by working closely with production people
involved in fabrication, machining, assembly and Trials.
• Clearing non-conformity and quality notifications.
• Involved in providing optimum design at minimum cost in order to be competitive in
the market.
ACHIEVEMENT:
Achieved Company goal of Doing a 4 cavity Plastic Injection Mould Tool Design & Manufacturing for
a part called JUMBO NANCY JAR BASE for Mixer grinder in 20 days of time at STOVEKRAFT PVT LTD
under the Guidance of Mr. Dhanadhan (GM Tool Room).
Achieved company goal of doing a 13 stage progressive Press Tool Design & Manufacturing for a part
called FACE PLATE for LPG Stove in 2 months of time at STOVEKRAFT PVT LTD under the Guidance of
Mr. Dhanadhan (GM Tool Room).
STANDARD TRAINING AWARENESS:
ISO 9001:2008
Poka-Yoke (Fool Proofing)
KAIZEN
4. 5s
EHS (Environment Health & Safety)
DFMEA
WORK EXPERIENCE:
1. DME Company India Pvt Ltd- Bangalore
DME Company was established by 1942 at USA (WORLD HEADQUARTERS) and In
INDIA it was started by 1993, DME has more than 30 plus Branches in worldwide Global
Location. In Which India Branch is one among them. India Base DME Company has two
units one at “Bangalore” (Head Office) and another one is at “Belgaum” (Manufacturing
Plant).
They are into manufacturing of Plastic Injection Moulds and Mould Bases, Die Casting
Bases, Press Tool Die Sets, Cutting Tools, Mould Base Parts like: Leader pins, springs,
Ejector Pins, lifters, Inter locks, Locating Ring, Sprue Bush etc.
Their Major Customers: Milacron, Cashmere Moulding, Free Form Polymers, Royal Mould
Technologies etc.
Designation : Engineer (US- CAD / CAM Operations)
Duration : July 2014 – Till Date.
Job Profile : Reporting to USA plant General Manager were I Involved in Project
Management, Design & Development of Plastic Moulds, Mould Bases, Press Tools Dies, Die
Casting, planning and execution of given jobs to achieve the objective of the company &
Satisfying the customer. Reviewing Design, getting Clarification Regarding Work from USA
Engineer. Reaching Commitment according to USA Engineers.
Responsibilities:
• General Conceptual tool design.
• Support DME -US for drawings/programming.
• Work assignment and tasks will be directly deal with DME-US.
• Programming / Print cleaning using Solid Works and Alpha Cam.
• Flexible working hours to meet USA requirements.
• Development of tool design models & detailing utilizing Solid works & Pro-E.
• Design & Development of Plastic Injection Moulds for Thermo plastic & Thermo Set
& Metal Injection Moulds.
• Release Detail Drawing for Manufacturing.
5. • Analysing the problems on the product & Mould Base giving solutions to the customer
for the product modification considering the tooling aspects.
• 2D to 3D Conversion, 3D to 2D Conversion.
• Monthly Route in Data Backup at HO (Bangalore).
2. Indo-Us MIM Tec Pvt Ltd- Doddaballapur
Established in 2004, The Company has two branches one was in Hoskote & one more
they started at Doddaballapur. They are providing their service for Aerospace, Defence
Products, Automotive, electronics Consumer durables industry and has been making rapid
strides for the last several years, posting a growth rate well above that of the industry in
general. They are making Plastic Injection Moulding tools & Metal Injection Moulding
Tools, Press Tools, Casting Tools, Jigs & Fixture.
Their major Clients: Honeywell, Bosch, Rutherford controls, ABB, ALB etc.
Designation : Design Designer
Duration : Nov 2013 – June 2014.
Job Profile : The posting was Assistant to General Manager Involved in Design &
Development of Plastic Moulds, Metal Injection Moulds, Press Tools, Die Casting, Jigs &
Fixture, planning and execution of given jobs to achieve the objective of the company &
Satisfying the customer. Reviewing Design meetings, Guiding Junior Designers, Toolmakers.
Responsibilities:
• General Conceptual tool design.
• Development of tool design models & detailing utilizing Solid works & Pro-E.
• Design & Development of Plastic Injection Moulds for Thermo Set & Metal Injection
Moulds.
• Release Detail Drawing for Manufacturing.
• Design the Tools as per DFMEA.
• Process Planning, Electrode Planning & final assembly for Moulds, Jigs & Fixtures.
• 2D to 3D Conversion, 3D to 2D Conversion.
• Design review & Documentation for internal & external auditing.
• Preparation of tool design status report for KRA (Key Result Area) meeting.
3. Stovekraft Pvt Ltd (Pigeon & Gilma), Bangalore
6. Set up in 1999, The group has made a niche in kitchen appliances industry and has been
making rapid strides for the last several years, posting a growth rate well above that of the
industry in general. The 500 Crore plus company is the force behind the two flagship brands
in the market, namely Pigeon and Gilma.
Designation : Senior Tool Designer (Design Engineer)
Duration : Jan 2011 – Oct 2013
Job Profile : The posting was Assistant to General Manager Involved in Design &
Development of Plastic Moulds, Press Tools, Die Casting, Jigs & Fixture, planning and
execution of given jobs to achieve the objective of the company. Reviewing Design meetings,
Guiding Junior Designers, Toolmakers. Co-ordinating with Product Designers to get the work
done.
Responsibilities:
• General Conceptual tool design.
• Development of tool design models & detailing utilizing Solidworks & Pro-E.
• Design & Development of Plastic Injection Moulds for Thermo Set & Thermo Plastic
materials.
• Design & Development of Press Tool for sheet Metal Products.
• Release Detail Drawing for Manufacturing.
• Design the Tools as per DFMEA.
• Analysing the problems on the product & giving solutions to the customer for the
product modification considering the tooling aspects.
• Process Planning, Electrode Planning & final assembly for Moulds, Press tools & Jigs
& Fixtures.
• Coordinating with manufacturing team (M/C Shop, CNC, Production & Quality
departments) to get the work done.
• Design review & Documentation for internal & external auditing.
• Vendor development to get work done.
• Preparation of tooling status report for KRA (Key Result Area) meeting.
4. Electro Plasts Pvt Ltd Bangalore
7. It is a TUV certified company located at Kumbalagudo, Bangalore. They are the
manufacturers of Plastic injection Moulding for Auto Parts. Plastic injection Moulding,
manufacturing and production are there main works.
Designation : Executive Engineer (Tool Designer cum Tool Maker)
Duration : June 2009 to November 2009
Job Profile : Design & Development of injection moulds for Thermo plastic material,
Tool Making and Tool Assembly, Coordinating the Group & Manufacturing Tools and
Moulds & Attending Trials.
Clients : TVS, Mahindra & Mahindra, Havells, etc
Job Profile : The posting was Assistant to General Manager Involved in Design
and manufacturing of Plastic Moulds, Process planning and execution of given jobs to achive
the objective of the company. Reviewing Design meetings.
Responsibilities:
• Design & Development of Plastic Injection Moulds for Thermo Plastic materials.
• Producing Detail Drawing for Manufacturing.
• Process Planning, Electrode Planning & final assembly of Moulds, Jigs & Fixtures.
• Outsourcing the work.
• Process Planning & Scheduling.
• Vendor Development.
• Preparation of tooling status report for KRA (Key Result Area) meeting.
5. Cessna Technologies Pvt Ltd Bangalore
It is an ISO 9001:2008 certified companies located at Bangalore. They are the Out
sourcing Design Company. Plastic injection Moulding, Press tools Designs, Jigs & Fixtures,
Belt Conveyors, Aero Space Design, Etc.
Designation : Trainee Design Engineer
Duration : June 2008 – May 2009
Job Profile : Design, Detailing, Assembly Modelling of Plastic Injection Moulds
and Press tools.
Clients : K- Tech Italy, ASPEL Belgium. JSW, Proman. etc
8. Responsibilities:
• Interpretation of design and drawings.
• Conversion of 3d & 2d Drawings.
• Tool Design With all Necessary 3D Models & 2D drawings.
• Electrode Extractions.
• Team coordinating.
• Awareness of ISO 9001-2000 and Awareness of Quality Circle.
IT SKILLS:
Microsoft Office, Photoshop, Win xp, Win 7, Win 10, AutoCAD, Solidworks, Proe, Ug NX.
OTHER SOCIAL & CULTURAL ACTIVITIES:
Social Activities: Helping Poor Peoples, visiting Orphanage centre etc.
Other Activities: Listening Music, Walking, driving, Playing Volley Ball, Carom, Chess,
Internet etc.
MAJOR PROJECTS HANDLED:
CUSTOMER PRODUCT NAME/TYPE ORGANISATION
DME-USA 3940255 FINAL MUD BUILD DME India Pvt Ltd
ABB Shaft Bearing Holder Indo-us MIM Tec Pvt Ltd
Pigeon
Home Led Solar Battery
Housing
Stovekraft Pvt Ltd- Harohalli
Mahindra
08 Cavity Mould for oil Cap
Resister
Electro Plast Pvt Ltd
CTPL
02 Cavity Mould for Car Belt
Cover for Autolive
Cessna Technologies Pvt Ltd
9. Personal Details
Father’s Name : Nanjaiah N
Date of Birth : 18/07/1987
Nationality : Indian
Marital Status : Single
Language known : English, Kannada, Hindi.
Permanent address : S/o Nanjaiah N
Shiva Parvathi Nilaya,
Near Krishnaiahna Katte,
Anitha Convent Road,
Malavalli Town & Taluk
Mandya District- 571 430
Mobile : +91 9900797461
E- Mail ID : hn.lokeshbattery@yahoo.com
Declaration
The information furnished above is true and correct to the best of my knowledge and any
statement has misleading nature I am solely responsible for it.
Lokesh H N
Reference
Venugopal J S
Engineer US - Operations