This technical data sheet provides information on the properties, processing recommendations, and testing results for the polycarbonate injection molding grade ENV14-A1514R-1000. Key properties include a specific gravity of 1.20, melt flow rate of 15.0 g/10 min, tensile strength of 8,700 psi, and notched Izod impact strength of 14.5 ft-lb/in. Recommended drying is 3-4 hours at 230°F and processing parameters include cylinder temperatures from 500-580°F and mold temperature of 155-200°F.
Mechanical properties of Continuos Fibers and Nylon-based materials for Mark Two 3D printer. Strong, light and affordable 3d printed plastic objects reinforced with fiber for increased strenght and stiffness.
High stiffness, best in class moisture stability and elevated temperature resistance. For Test of water and fluid handling
components, wind tunnel models and master patterns applications.
plastic testing ASTM,ISO,IEC
mechanical,chemical,electrical optical testing.
Polymer Testing provides a forum for developments in the testing of polymers and polymeric products and is hence of interest to those concerned with testing rubbers and plastics in research, in production and in connection with the specification and purchase of products.
Learn testing solutions for pre-filled, hypodermic, single-use, and needle-based injection systems, as required per ISO 11040-4, ISO 7886-1, ISO 8537, ISO 80369-20, and ISO 11608.
Mechanical properties of Continuos Fibers and Nylon-based materials for Mark Two 3D printer. Strong, light and affordable 3d printed plastic objects reinforced with fiber for increased strenght and stiffness.
High stiffness, best in class moisture stability and elevated temperature resistance. For Test of water and fluid handling
components, wind tunnel models and master patterns applications.
plastic testing ASTM,ISO,IEC
mechanical,chemical,electrical optical testing.
Polymer Testing provides a forum for developments in the testing of polymers and polymeric products and is hence of interest to those concerned with testing rubbers and plastics in research, in production and in connection with the specification and purchase of products.
Learn testing solutions for pre-filled, hypodermic, single-use, and needle-based injection systems, as required per ISO 11040-4, ISO 7886-1, ISO 8537, ISO 80369-20, and ISO 11608.
DuraForm HST Composite - SLS Systems - Material properties (EN)Quoc Tuan Duong, ing.
High specific stiffness, elevated temperature resistance, anisotropic mechanical properties just like fiber-filled, injection
molded materials. For UAV structural components, housings, enclosures, impellers, connectors, consumer sporting goods applications, etc.
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, other films and paper.
Better than 0.5% of reading value effectively ensures accurate test results
Multiple testing modes are available, including tensile strength, deformation, peeling and tearing, etc.
Stress at defined elongation, elastic modulus and stress and strain etc. could be analyzed
1200mm extra-long stroke satisfies the test needs of various materials with extreme deformation rate
HTT-L1 Hot Tack Tester is applicable in hot tack and heat seal performance tests for plastic film, laminated film and other packaging film. Meanwhile, it is applicable in peel, shear, tension and other test items for adhesive, adhesive tape, laminated film, plastic film, paper and other flexible materials.
Glass filled polyamide (nylon) material for real-world physical testing and functional use. Excellent mechanical stiffness
and elevated temperature resistance. For Enclosures and housings that require more stiffness, sporting goods, aircraft and motorsports parts applications, etc.
Free Flowing Encapsulant meets NASA Low Outgassing SpecificationsMaster Bond
Ideal for potting and encapsulation applications, Master Bond Supreme 121AO is a heat curing epoxy featuring excellent thermal conductivity and high temperature resistance. Scroll through this infographic to learn more.
MED-01 Medical Packaging Tester is professionally applicable to the determination of force properties of various medical packaging materials, with high precision (better than 0.5% of reading accuracy) and multiple test ranges. The instrument is designed with 16 independent test modes and bidirectional test mode of stretching and compression, which can meet various test requirements.
MXD-02 Coefficient of Friction Tester is designed for static and kinetic coefficient of friction tests of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands. Besides, this tester is applicable to the smoothness measurement of cosmetics, eye drop and other daily chemistry.
DuraForm HST Composite - SLS Systems - Material properties (EN)Quoc Tuan Duong, ing.
High specific stiffness, elevated temperature resistance, anisotropic mechanical properties just like fiber-filled, injection
molded materials. For UAV structural components, housings, enclosures, impellers, connectors, consumer sporting goods applications, etc.
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, other films and paper.
Better than 0.5% of reading value effectively ensures accurate test results
Multiple testing modes are available, including tensile strength, deformation, peeling and tearing, etc.
Stress at defined elongation, elastic modulus and stress and strain etc. could be analyzed
1200mm extra-long stroke satisfies the test needs of various materials with extreme deformation rate
HTT-L1 Hot Tack Tester is applicable in hot tack and heat seal performance tests for plastic film, laminated film and other packaging film. Meanwhile, it is applicable in peel, shear, tension and other test items for adhesive, adhesive tape, laminated film, plastic film, paper and other flexible materials.
Glass filled polyamide (nylon) material for real-world physical testing and functional use. Excellent mechanical stiffness
and elevated temperature resistance. For Enclosures and housings that require more stiffness, sporting goods, aircraft and motorsports parts applications, etc.
Free Flowing Encapsulant meets NASA Low Outgassing SpecificationsMaster Bond
Ideal for potting and encapsulation applications, Master Bond Supreme 121AO is a heat curing epoxy featuring excellent thermal conductivity and high temperature resistance. Scroll through this infographic to learn more.
MED-01 Medical Packaging Tester is professionally applicable to the determination of force properties of various medical packaging materials, with high precision (better than 0.5% of reading accuracy) and multiple test ranges. The instrument is designed with 16 independent test modes and bidirectional test mode of stretching and compression, which can meet various test requirements.
MXD-02 Coefficient of Friction Tester is designed for static and kinetic coefficient of friction tests of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands. Besides, this tester is applicable to the smoothness measurement of cosmetics, eye drop and other daily chemistry.
A newline of Nontoxic high density materials | High density plastic | are being trademarked by Eco Mass technologies using radiation/ X-ray/ Neutron shielding.
Barrier Material Mil prf-81705 d protectesd Than Nguyen
Military Packaging: Barrier Material: Water vapor proof, Electrostatic Protective, Electrostatic
and Electromagnetic Shielding, Flexible, Heat-Sealable
Aok led light- the leader of led industryWally Lee
We are a member of National Semiconductor Lighting Industry Alliance and has been one of the biggest Light Manufacturer Company in China mainland. We let our clients to benefit with our high quality services and products. Give us a call at +86-591-83820886.
Putting the SPARK into Virtual Training.pptxCynthia Clay
This 60-minute webinar, sponsored by Adobe, was delivered for the Training Mag Network. It explored the five elements of SPARK: Storytelling, Purpose, Action, Relationships, and Kudos. Knowing how to tell a well-structured story is key to building long-term memory. Stating a clear purpose that doesn't take away from the discovery learning process is critical. Ensuring that people move from theory to practical application is imperative. Creating strong social learning is the key to commitment and engagement. Validating and affirming participants' comments is the way to create a positive learning environment.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
VAT Registration Outlined In UAE: Benefits and Requirementsuae taxgpt
Vat Registration is a legal obligation for businesses meeting the threshold requirement, helping companies avoid fines and ramifications. Contact now!
https://viralsocialtrends.com/vat-registration-outlined-in-uae/
Premium MEAN Stack Development Solutions for Modern BusinessesSynapseIndia
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
The world of search engine optimization (SEO) is buzzing with discussions after Google confirmed that around 2,500 leaked internal documents related to its Search feature are indeed authentic. The revelation has sparked significant concerns within the SEO community. The leaked documents were initially reported by SEO experts Rand Fishkin and Mike King, igniting widespread analysis and discourse. For More Info:- https://news.arihantwebtech.com/search-disrupted-googles-leaked-documents-rock-the-seo-world/
Unveiling the Secrets How Does Generative AI Work.pdfSam H
At its core, generative artificial intelligence relies on the concept of generative models, which serve as engines that churn out entirely new data resembling their training data. It is like a sculptor who has studied so many forms found in nature and then uses this knowledge to create sculptures from his imagination that have never been seen before anywhere else. If taken to cyberspace, gans work almost the same way.
Unveiling the Secrets How Does Generative AI Work.pdf
Klip technical detail
1. 10100 Hedden Road
Evansville, Indiana 47725
812-868-0808
Technical Data Sheet
ENV14-A1514R-1000
PC – Polycarbonate
Injection Molding Grade, Natural, Impact Modified for Excellent Toughness,
RoHS Compliant
Properties Test Method Nominal Value
Physical
Specific Gravity ASTM D 792 1.20
Melt Flow Rate (300/1.2 kg) ASTM D 1238 15.0 g./10 min.
Mold Shrinkage, Linear Flow ASTM D 955 0.005 – 0.007 in/in.
Mechanical
Tensile Strength @ Yield ASTM D 638 8,700 psi (60.0 MPa)
Elongation @ Break ASTM D 638 130 %
Flexural Strength ASTM D 790 12,000 psi (82.7 MPa)
Flexural Modulus ASTM D 790 325,000 psi (2,241 MPa)
Impact
Notched Izod Strength @ 73 °F ASTM D 256 14.5 ft-lb/in. (773.6 J/m)
Thermal
Heat Deflection Temp. @ 264 psi ASTM D 648 255 °F (124 ˚C)
Flammability
Flame Rating UL 94 HB @ 0.125 in.
Processing Recommendations
Drying Conditions
Minimum Recommend Time 3 to 4 hours @ 230 °F (110 °C)
Processing Temperature Profile
Cylinder
Rear (Zone 1 Hopper) 500 – 535 °F
Middle (Zone 2) 510 – 560 °F
Front (Zone 3) 520 – 580 °F
Nozzle (Zone 4 Nozzle) 510 – 575 °F
Mold 155 – 200 °F
Processing Parameters
Injection Speed Moderate to Fast
Back Pressure 70 – 150 psi
Screw Speed 40 – 70 rpm
The above listed nominal values were obtained from specimens molded and tested under carefully controlled laboratory conditions. This data is
furnished so that the user will evaluate it through testing and determine the suitability of the product. Since the conditions of application and use
of our product are beyond our control, no warranty or representation is expressed or implied regards results from the use of this data.
Enviroplas, Inc. will not be liable for any injury or damage arising from the application of this information.
