Dr. S. N. Mahendra's journey with linear induction motors began in 1971 when he created a working model for an engineering exhibition. Over several decades, he developed numerous applications of linear induction motors, including for shuttle propulsion in looms, surface transport systems, overhead transport systems, conveyor belts, and more. His early work led to further research opportunities, including a PhD at The City University of London where he analyzed the link between electrical inputs and mechanical outputs of electromagnetic systems. Upon returning to BHU in 1978, he integrated his learnings to improve existing linear induction motor systems with support from colleagues.
IRJET- Power Generation using Bicycle Mechanism as an Alternative Energy SourceIRJET Journal
This document discusses using human power from bicycling to generate electricity. It notes that over 2 billion people lack access to electricity, and renewable energy sources like human power could help meet energy needs. The document reviews the history of pedal-powered machines and recent developments in harvesting energy from bicycling. Specifically, tests show the average cyclist can sustainably generate 75 watts of electrical power for an hour using a generator connected to a bicycle. Recent research in fitness facilities has also explored converting human power on exercise machines into electricity.
This document describes a proposed system to generate electricity from speed bumps or rumble strips using a rack and pinion mechanism. The system would convert the kinetic energy of vehicles passing over the rumble strips into rotational motion using the rack and pinion. This rotational motion would then turn an electric generator to produce electricity. Calculations are provided for the design of the rack and pinion, bevel gears, springs, shafts, bearings, and pulleys required for the system. The proposed system aims to tap into wasted kinetic energy from vehicles to generate affordable and sustainable electricity.
This document discusses three new technologies: Poll Everywhere allows users to post questions and get results, Wordle turns lists of words into colorful word art, and Toondoo lets people easily create their own cartoons.
Secure your association’s financial well-being by preparing an effective and comprehensive annual budget. Use our step-by-step checklist to help build an actionable budget that will enhance your residents’ property values and overall lifestyle.
DISCLAIMER: The budgeting process may differ based upon your local city, state or county laws. Ensure your budgeting process is compliant by referring to your association’s governing documents and local legislation.
O documento discute diferentes opções para persistência de dados, incluindo memória, cache, arquivos, rede, bancos de dados e fita. Cada opção é analisada considerando vantagens como desempenho e desvantagens como confiabilidade. O documento recomenda qual opção usar dependendo do tipo e necessidade dos dados, como performance de consulta versus sobrevivência ao reinício.
Dokumen ini membahas sistem muskuloskeletal pada ibu hamil. Pada trimester pertama tidak banyak perubahan, namun fleksibilitas dan mobilitas persendian meningkat. Pada trimester kedua, mobilitas persendian berkurang terutama di siku dan pergelangan tangan. Pada trimester ketiga, postur dan cara berjalan berubah karena peningkatan berat badan dan distensi abdomen. Tulang dan gigi umumnya tidak mengalami perubahan selama kehamilan normal.
IRJET- Power Generation using Bicycle Mechanism as an Alternative Energy SourceIRJET Journal
This document discusses using human power from bicycling to generate electricity. It notes that over 2 billion people lack access to electricity, and renewable energy sources like human power could help meet energy needs. The document reviews the history of pedal-powered machines and recent developments in harvesting energy from bicycling. Specifically, tests show the average cyclist can sustainably generate 75 watts of electrical power for an hour using a generator connected to a bicycle. Recent research in fitness facilities has also explored converting human power on exercise machines into electricity.
This document describes a proposed system to generate electricity from speed bumps or rumble strips using a rack and pinion mechanism. The system would convert the kinetic energy of vehicles passing over the rumble strips into rotational motion using the rack and pinion. This rotational motion would then turn an electric generator to produce electricity. Calculations are provided for the design of the rack and pinion, bevel gears, springs, shafts, bearings, and pulleys required for the system. The proposed system aims to tap into wasted kinetic energy from vehicles to generate affordable and sustainable electricity.
This document discusses three new technologies: Poll Everywhere allows users to post questions and get results, Wordle turns lists of words into colorful word art, and Toondoo lets people easily create their own cartoons.
Secure your association’s financial well-being by preparing an effective and comprehensive annual budget. Use our step-by-step checklist to help build an actionable budget that will enhance your residents’ property values and overall lifestyle.
DISCLAIMER: The budgeting process may differ based upon your local city, state or county laws. Ensure your budgeting process is compliant by referring to your association’s governing documents and local legislation.
O documento discute diferentes opções para persistência de dados, incluindo memória, cache, arquivos, rede, bancos de dados e fita. Cada opção é analisada considerando vantagens como desempenho e desvantagens como confiabilidade. O documento recomenda qual opção usar dependendo do tipo e necessidade dos dados, como performance de consulta versus sobrevivência ao reinício.
Dokumen ini membahas sistem muskuloskeletal pada ibu hamil. Pada trimester pertama tidak banyak perubahan, namun fleksibilitas dan mobilitas persendian meningkat. Pada trimester kedua, mobilitas persendian berkurang terutama di siku dan pergelangan tangan. Pada trimester ketiga, postur dan cara berjalan berubah karena peningkatan berat badan dan distensi abdomen. Tulang dan gigi umumnya tidak mengalami perubahan selama kehamilan normal.
Kumar Prem Ranjan is applying for a position as a Mechanical and Production Engineer. He currently works as a Mechanical Maintenance Engineer at National Construction Co. Ltd. for Tata Steel in Jamshedpur since 2013. His responsibilities include breakdown maintenance, preventive and predictive maintenance, equipment management, and more. He received a B.E. in Mechanical and Production Engineering from Sathyabama University in Chennai in 2013.
Roche is the market leader in point-of-care diagnostics testing in the US, with the broadest portfolio addressing various customer needs across settings like hospitals, physicians' offices, and patient self-testing. The point-of-care diagnostics market is growing rapidly due to factors like technology advances making lab-quality tests more accessible near patients. Roche's strategy is to drive further decentralization of testing, expand its product offerings, and leverage its leadership position and assets to continue growing market share.
Este documento proporciona información sobre la Corporación Venezolana de Guayana, también conocida como SIDOR. SIDOR es la empresa siderúrgica estatal más grande de Venezuela, ubicada en Ciudad Guayana. Su misión es producir acero con alto valor agregado para abastecer principalmente al mercado nacional y mercados como ALBA, el Mercosur y el Caribe. En los últimos años, la producción de SIDOR ha disminuido debido a la falta de insumos, repuestos y una mala administración. Actualmente tiene más de 18
Digital Health & Wellness Summit @ Mobile World Congress 20163GDR
OMETM is a new mobile app that uses artificial intelligence and a person's genetic and health data to provide personalized healthcare information and recommendations. It aims to help consumers better understand and manage their health by answering questions in everyday language and giving tailored advice that takes into account factors like medical history, lifestyle, and genetic variants. As more users interact with the app, it will become more accurate over time through dynamic learning. The goal is to empower individuals to take a more active role in their healthcare by making complex medical data easily accessible and actionable.
Michael B. Chapa is seeking a technical position in computer data storage engineering, implementation, or administration. He has 15 years of experience supporting TCP/IP networks, Windows servers and clients, and virtual environments. He has 9 years of experience implementing EMC storage solutions including VNX, Isilon, XtremIO, Clariion, RecoverPoint, and Avamar. He holds several EMC and Microsoft certifications.
The document describes a regenerative acceleration generator innovation called ReGenX that employs a load current delay. It produces an assistive armature reaction instead of a resistive one, adding torque and power to the driveshaft when loaded instead of reducing it. Testing showed up to a 40% reduction in required prime mover input power to maintain steady speed. The ReGenX generator allows for battery recharging during all vehicle operation and beyond, and can be used in electric vehicles, conveyor systems, escalators and more.
This document provides an introduction to an Engineering Mechanics course. It outlines the instructor details, course location and timings. The course objectives are to predominantly study statics and the concepts of forces, equilibrium, and their applications in areas like robotics, civil engineering, biomedicine, and seismology. Example problems are provided for each area. The recommended texts and references are listed. Fundamental principles like Newton's laws, parallelogram law, and transmissibility principle are introduced. The importance of modeling real-life problems as simplified systems for analysis is discussed. Examples of modeling trusses, aircraft landing gears, bridges, basketball poles, and drawbridges are given.
The ReGenX Generator allows for EV battery recharging during 100% of the EV operation and even beyond 100% duration, during non-use if a Kinetic Energy Recovery System (KERS) is employed that will allow continued battery recharging after use or at stop lights etc.
This paper presents a novel six degrees of freedom mechanism to integrate conical article with the cylindrical article which are large and heavy. The six desired motions include six linear motions and six rational motions. The linear motions are vertical, longitudinal and lateral. The vertical motion is achieved by toggle jack, longitudinal by wheel and rail assembly and the lateral motion is achieved by cross slides. The three rotational motions namely pitch, yaw and roll are achieved by simultaneous movement of toggle jacks, simultaneous movement of cross slides and rollers respectively. It is designed in such a way that it sustains the weight of the heavy articles and also prevents slipping and toppling of the conical article. This approach helps to satisfy and fulfil the goal of aligning the main article flange to the conical article flange for further bolting. The mechanism is designed keeping in mind factors like ergonomics and aesthetics.
This document summarizes a student seminar presentation on designing a solar-powered wheelchair for disabled or handicapped individuals. The presentation covers introducing the current non-powered wheelchair system, the objectives of developing a solar-powered model including generating renewable energy and allowing longer distance travel. It also includes diagrams of the proposed gear mechanism and statistical analysis of lift energy usage. The conclusion restates that the aim is to develop an affordable system that generates power from the sun to enable independent mobility.
This document describes a foot power generator project created by a group of students. The generator converts the kinetic energy from human footsteps into electrical energy. It uses a rack and pinion gear system connected to springs and a dynamo to transform the vertical motion of stepping on a plate into rotational motion that generates DC power. The summary provides an overview of the components, working mechanism, applications, advantages, and conclusions of the project to harness wasted footstep energy as an alternative power source.
Advanced IOT BASED SOLAR AND MOTOR OPERATED ELECTROMOTIVE MAGLEV TRAIN MODEL Puneet Bhatia
This document summarizes a paper presented at the International Advanced Research Journal in Science, Engineering and Technology conference on May 5, 2023. The paper describes an advance IoT based solar and motor operated electromotive maglev train model. Key points include:
- The model works on the principle of magnetic levitation and uses magnets to create repulsion and allow the train to float.
- An exhaust fan provides thrust to move the train while an IoT system allows for remote control of the fan speed and movement of the train.
- Power is provided by a solar panel with battery backup to run the IoT systems.
- The model aims to provide electricity to rural areas in a more efficient way than traditional
This document is a project report on modeling the dynamics of long passenger trains. It presents a mathematical model of a passenger train composed of rigid coaches connected by springs. Force equations are derived for the horizontal, vertical and rotational motion of the coaches. A mass matrix and stiffness matrix are developed to determine the natural frequencies and mode shapes of the train. Parameters for the coaches and connections are specified based on literature. Results of the model will provide insight into the effect of train speed and number of coaches on oscillation frequencies.
The document proposes a solar-powered train system for public transportation. Solar cells would be installed on the rooftops of train coaches to directly charge storage batteries mounted underneath. This system would help address issues like rising fuel costs and shortages of non-renewable energy sources. Developing solar-powered trains is challenging and requires selecting appropriate solar panels, batteries, motors and designing the chassis. If implemented successfully on a large scale, solar-powered trains could help reduce dependence on fossil fuels and make transportation more environmentally friendly.
This document summarizes a student project to design a solar powered wood cutter. It includes sections on the objectives of harnessing solar energy, literature review of key components like solar panels, motors and linkages, methodology outlining materials selected and a basic design, results and discussion of what was learned, and conclusions about potential improvements. The overall aim was to create a mechanized wood cutter running solely on solar power to fulfill market needs for renewable energy solutions.
Simulation of induction motor for reference of practical engineeringvivatechijri
This Project simulates an Induction Motor. It will be helpful for the performer in the practical, observation of the Induction Motor in the lab, as the design motor will be the simulation of the actual motor used for the practical and experiment. The Factors such as direction of magnetic field, magnetic field density, number of windings, heat dissipation, temperature gradient, current flow, etc. which are not visible for the performer but actually plays a very important role for the performance and the efficiency of the Induction Motor will be seen digitally, graphically with the help of simulation on the platform of ANSYS software. The design and calculation of various parameters of the induction motor are done to obtain a simulation which will be approximate to that of the induction motor used for the practical purposes. This will not only increase the interest of the performer but also the understandability of the practical will be more convenient as the performer will be able to gain knowledge about various parameter which were practically impossible to view.
This document is a seminar report on magnetic levitation trains submitted by Anuj Bansal to partial fulfillment of a Bachelor of Technology degree in electrical engineering. The report contains an introduction to magnetic levitation technology, different types of magnetic levitation including permanent magnet, electromagnetic, and electrodynamic types. It discusses the working principles of levitation, propulsion, stability, and guidance of maglev trains and compares maglev trains to conventional aircraft and trains.
This document summarizes a research paper that proposes a new vibration propulsion system for powering a small mobile robot. The system uses two counter-rotating eccentric masses, similar to the Dean drive, to excite an oscillating inner frame attached to an outer frame by springs. Wheels on the outer frame can be driven forward due to inertial and friction forces generated by the oscillating system. The document presents the dynamic model of the system and derives the governing differential equation. Experimental testing showed the system could successfully propel a robot vehicle and generate a maximum towing force of 8.5N while weighing 25N itself. Further improvements to increase propulsion are recommended.
IRJET- Low Cost Uniaxial Shake Table for Harmonic ExcitationIRJET Journal
This document describes the design and development of a low-cost uniaxial shake table. Shake tables are typically expensive devices used to simulate earthquakes and vibrations on structural models. The objective of this project was to create an affordable shake table for laboratory testing.
The design involves a steel platform attached to a rectangular frame by linear bearings. An AC motor is connected to the frame and uses a connecting rod to convert its rotary motion into horizontal oscillations of the platform. Components like steel plates, bearings, and an AC speed controller were selected to achieve simple harmonic excitation up to 10 Hz and support a 50 kg payload. Detailed drawings and specifications are provided. The shake table was designed, fabricated, and assembled
This document discusses Lenz's Law of induction and Heins' Law of induction. Lenz's Law states that an induced current will flow in a direction to oppose the change that created it. Heins' Law proposes that an induced current with a delayed load will flow in a direction to assist the change that created it. The document provides endorsements from scientists and engineers about the technology. It also lists 14 proofs of experiments replicating the effect, conducted by the inventor and other groups.
Kumar Prem Ranjan is applying for a position as a Mechanical and Production Engineer. He currently works as a Mechanical Maintenance Engineer at National Construction Co. Ltd. for Tata Steel in Jamshedpur since 2013. His responsibilities include breakdown maintenance, preventive and predictive maintenance, equipment management, and more. He received a B.E. in Mechanical and Production Engineering from Sathyabama University in Chennai in 2013.
Roche is the market leader in point-of-care diagnostics testing in the US, with the broadest portfolio addressing various customer needs across settings like hospitals, physicians' offices, and patient self-testing. The point-of-care diagnostics market is growing rapidly due to factors like technology advances making lab-quality tests more accessible near patients. Roche's strategy is to drive further decentralization of testing, expand its product offerings, and leverage its leadership position and assets to continue growing market share.
Este documento proporciona información sobre la Corporación Venezolana de Guayana, también conocida como SIDOR. SIDOR es la empresa siderúrgica estatal más grande de Venezuela, ubicada en Ciudad Guayana. Su misión es producir acero con alto valor agregado para abastecer principalmente al mercado nacional y mercados como ALBA, el Mercosur y el Caribe. En los últimos años, la producción de SIDOR ha disminuido debido a la falta de insumos, repuestos y una mala administración. Actualmente tiene más de 18
Digital Health & Wellness Summit @ Mobile World Congress 20163GDR
OMETM is a new mobile app that uses artificial intelligence and a person's genetic and health data to provide personalized healthcare information and recommendations. It aims to help consumers better understand and manage their health by answering questions in everyday language and giving tailored advice that takes into account factors like medical history, lifestyle, and genetic variants. As more users interact with the app, it will become more accurate over time through dynamic learning. The goal is to empower individuals to take a more active role in their healthcare by making complex medical data easily accessible and actionable.
Michael B. Chapa is seeking a technical position in computer data storage engineering, implementation, or administration. He has 15 years of experience supporting TCP/IP networks, Windows servers and clients, and virtual environments. He has 9 years of experience implementing EMC storage solutions including VNX, Isilon, XtremIO, Clariion, RecoverPoint, and Avamar. He holds several EMC and Microsoft certifications.
The document describes a regenerative acceleration generator innovation called ReGenX that employs a load current delay. It produces an assistive armature reaction instead of a resistive one, adding torque and power to the driveshaft when loaded instead of reducing it. Testing showed up to a 40% reduction in required prime mover input power to maintain steady speed. The ReGenX generator allows for battery recharging during all vehicle operation and beyond, and can be used in electric vehicles, conveyor systems, escalators and more.
This document provides an introduction to an Engineering Mechanics course. It outlines the instructor details, course location and timings. The course objectives are to predominantly study statics and the concepts of forces, equilibrium, and their applications in areas like robotics, civil engineering, biomedicine, and seismology. Example problems are provided for each area. The recommended texts and references are listed. Fundamental principles like Newton's laws, parallelogram law, and transmissibility principle are introduced. The importance of modeling real-life problems as simplified systems for analysis is discussed. Examples of modeling trusses, aircraft landing gears, bridges, basketball poles, and drawbridges are given.
The ReGenX Generator allows for EV battery recharging during 100% of the EV operation and even beyond 100% duration, during non-use if a Kinetic Energy Recovery System (KERS) is employed that will allow continued battery recharging after use or at stop lights etc.
This paper presents a novel six degrees of freedom mechanism to integrate conical article with the cylindrical article which are large and heavy. The six desired motions include six linear motions and six rational motions. The linear motions are vertical, longitudinal and lateral. The vertical motion is achieved by toggle jack, longitudinal by wheel and rail assembly and the lateral motion is achieved by cross slides. The three rotational motions namely pitch, yaw and roll are achieved by simultaneous movement of toggle jacks, simultaneous movement of cross slides and rollers respectively. It is designed in such a way that it sustains the weight of the heavy articles and also prevents slipping and toppling of the conical article. This approach helps to satisfy and fulfil the goal of aligning the main article flange to the conical article flange for further bolting. The mechanism is designed keeping in mind factors like ergonomics and aesthetics.
This document summarizes a student seminar presentation on designing a solar-powered wheelchair for disabled or handicapped individuals. The presentation covers introducing the current non-powered wheelchair system, the objectives of developing a solar-powered model including generating renewable energy and allowing longer distance travel. It also includes diagrams of the proposed gear mechanism and statistical analysis of lift energy usage. The conclusion restates that the aim is to develop an affordable system that generates power from the sun to enable independent mobility.
This document describes a foot power generator project created by a group of students. The generator converts the kinetic energy from human footsteps into electrical energy. It uses a rack and pinion gear system connected to springs and a dynamo to transform the vertical motion of stepping on a plate into rotational motion that generates DC power. The summary provides an overview of the components, working mechanism, applications, advantages, and conclusions of the project to harness wasted footstep energy as an alternative power source.
Advanced IOT BASED SOLAR AND MOTOR OPERATED ELECTROMOTIVE MAGLEV TRAIN MODEL Puneet Bhatia
This document summarizes a paper presented at the International Advanced Research Journal in Science, Engineering and Technology conference on May 5, 2023. The paper describes an advance IoT based solar and motor operated electromotive maglev train model. Key points include:
- The model works on the principle of magnetic levitation and uses magnets to create repulsion and allow the train to float.
- An exhaust fan provides thrust to move the train while an IoT system allows for remote control of the fan speed and movement of the train.
- Power is provided by a solar panel with battery backup to run the IoT systems.
- The model aims to provide electricity to rural areas in a more efficient way than traditional
This document is a project report on modeling the dynamics of long passenger trains. It presents a mathematical model of a passenger train composed of rigid coaches connected by springs. Force equations are derived for the horizontal, vertical and rotational motion of the coaches. A mass matrix and stiffness matrix are developed to determine the natural frequencies and mode shapes of the train. Parameters for the coaches and connections are specified based on literature. Results of the model will provide insight into the effect of train speed and number of coaches on oscillation frequencies.
The document proposes a solar-powered train system for public transportation. Solar cells would be installed on the rooftops of train coaches to directly charge storage batteries mounted underneath. This system would help address issues like rising fuel costs and shortages of non-renewable energy sources. Developing solar-powered trains is challenging and requires selecting appropriate solar panels, batteries, motors and designing the chassis. If implemented successfully on a large scale, solar-powered trains could help reduce dependence on fossil fuels and make transportation more environmentally friendly.
This document summarizes a student project to design a solar powered wood cutter. It includes sections on the objectives of harnessing solar energy, literature review of key components like solar panels, motors and linkages, methodology outlining materials selected and a basic design, results and discussion of what was learned, and conclusions about potential improvements. The overall aim was to create a mechanized wood cutter running solely on solar power to fulfill market needs for renewable energy solutions.
Simulation of induction motor for reference of practical engineeringvivatechijri
This Project simulates an Induction Motor. It will be helpful for the performer in the practical, observation of the Induction Motor in the lab, as the design motor will be the simulation of the actual motor used for the practical and experiment. The Factors such as direction of magnetic field, magnetic field density, number of windings, heat dissipation, temperature gradient, current flow, etc. which are not visible for the performer but actually plays a very important role for the performance and the efficiency of the Induction Motor will be seen digitally, graphically with the help of simulation on the platform of ANSYS software. The design and calculation of various parameters of the induction motor are done to obtain a simulation which will be approximate to that of the induction motor used for the practical purposes. This will not only increase the interest of the performer but also the understandability of the practical will be more convenient as the performer will be able to gain knowledge about various parameter which were practically impossible to view.
This document is a seminar report on magnetic levitation trains submitted by Anuj Bansal to partial fulfillment of a Bachelor of Technology degree in electrical engineering. The report contains an introduction to magnetic levitation technology, different types of magnetic levitation including permanent magnet, electromagnetic, and electrodynamic types. It discusses the working principles of levitation, propulsion, stability, and guidance of maglev trains and compares maglev trains to conventional aircraft and trains.
This document summarizes a research paper that proposes a new vibration propulsion system for powering a small mobile robot. The system uses two counter-rotating eccentric masses, similar to the Dean drive, to excite an oscillating inner frame attached to an outer frame by springs. Wheels on the outer frame can be driven forward due to inertial and friction forces generated by the oscillating system. The document presents the dynamic model of the system and derives the governing differential equation. Experimental testing showed the system could successfully propel a robot vehicle and generate a maximum towing force of 8.5N while weighing 25N itself. Further improvements to increase propulsion are recommended.
IRJET- Low Cost Uniaxial Shake Table for Harmonic ExcitationIRJET Journal
This document describes the design and development of a low-cost uniaxial shake table. Shake tables are typically expensive devices used to simulate earthquakes and vibrations on structural models. The objective of this project was to create an affordable shake table for laboratory testing.
The design involves a steel platform attached to a rectangular frame by linear bearings. An AC motor is connected to the frame and uses a connecting rod to convert its rotary motion into horizontal oscillations of the platform. Components like steel plates, bearings, and an AC speed controller were selected to achieve simple harmonic excitation up to 10 Hz and support a 50 kg payload. Detailed drawings and specifications are provided. The shake table was designed, fabricated, and assembled
This document discusses Lenz's Law of induction and Heins' Law of induction. Lenz's Law states that an induced current will flow in a direction to oppose the change that created it. Heins' Law proposes that an induced current with a delayed load will flow in a direction to assist the change that created it. The document provides endorsements from scientists and engineers about the technology. It also lists 14 proofs of experiments replicating the effect, conducted by the inventor and other groups.
We daily lose our energy while travelling like on road, stairs but what-if we can store that energy and use when required.
We worked on a device that can convert human effort into electrical energy and store this energy for further use.
We tried to fabricate the device which utilize the human effort to generate the electricity and promote the non-conventional energy source.
NUMERICAL STUDY OF FLUID FLOW AROUND A DIVER HELPERijmech
Having access to high speed diving without the use of mechanical science and discovery centers have been
considered. Production of simple, yet effective tool to reduce energy consumption and associated diver is
very valuable. Assistant diver device that works with human muscle power, includes a pair of ballets. This
system reduces the energy required to dive to less than half as the speed increases to 2 to 5 knot. Using
numerical methods can answer a lot of questions and a simulation of the dynamic behavior of the device. In
this article, modeling of fluid flow around the Diver helper of FLUENT software and using Dynamic Mesh
have been done.
Flow lines show an increase in the angle of the fins and causes development of vortices behind them.
Pressure Cantor can also be used in the analysis of the fins. The drag coefficient ballet based on the device
at various angles in a period is reported in charts.
This document provides an overview of Electrical Energy Systems by Mohamed E. El-Hawary. It discusses the brief history of electric power systems from Edison's first power plant in 1881 to the development of alternating current systems and induction motors. The structure of modern power systems is also introduced, which include power generation, transmission, distribution and various components like generators, transformers and motors. The chapters covered in the book are outlined dealing with topics such as power generation, transmission, faults and protection, and energy management systems.
Elon Musk is invited to a demonstration of the ReGen-X technology, which can generate over 1100% more power than a conventional generator without drawing power from the drive shaft. The technology has been extensively tested and validated by various scientists and organizations. It is believed that this innovation should be investigated before investing in charging infrastructure, as it could help Tesla service customers in a financially prudent manner. The letter invites Musk and JB Straubel to attend a demonstration in Toronto, with travel costs covered, to see proof-of-concept vehicles charge themselves through regenerative braking and acceleration.
2. My Journey with Linear Induction Motor
Dr. S. N. MAHENDRA*
More than 4-decades agoR&D related to Linear
Induction Motor based propulsion was started in the
Department of Electrical Engineering. Initially it started
as a working model for Engineering Models
Exhibition.Later the activities covered a range of
applications like shuttle-propulsion in power-looms to
material-handling to surface/ overhead/underground/
people-mover transportation systems. The applications
developed and the R&D activities in chronological
order have been as follows:
• Shuttle-propulsion for weaving looms (1971-73) [1]
• Design & analysis methodologies standardization
(1973-97)[11]
• Surface-transportsystem (1980 continuing)[3, 12]
• Testing-methodologies & test-rigs (1980-87)
• Overhead-transportsystems (1983 continuing)[9]
• Conveyor-belt/material handling (1986 continuing)[9]
• LIM Powered People Mover system for closed-loop
circular track for Connaught Place people transport
system (1986-2013[4, 5]
• Malaviya Center for low cost LIM metro system (1997
continuing)[3, 9, 11]
• Independent control of forces of propulsion &
attraction (2003 continuing)[12]
• LIM powered sieving system for sorting ore near mines
(2003 continuing)
• LIM based traction elevator for vehicle parking (2012
continuing)[7]
• Linear Switched reluctance motor (2014 continuing)
• Segmented linear motor based propulsion for circular
looms (2014 continuing)[4]
The present article is based on the experiences,
problems-faced and developments made during the
journey of the author with Linear Induction Motor
(LIM).
The Journey Begins
The journey started in an interesting manner
during MODEX-70. Professor S. K. Kak, formerVice
Chancellor GoutamBudh Technical University, Noida,
was the student Convener of the famous Engineering
Models Exhibition and I was a member of his core
organization team. He asked me tomake and present
a model in the exhibition. He was himself heading
a huge team of dedicated students in making
a working model of Musical Fountain (similar to the
first of its type made and exhibited during EXPO-70
in Japan). When I asked him what shouldI make? He
suggested me to make a set of U-cores with DC coils
which are excited in a sequence such that a horizontal
component of the attraction force is produced in the
iron plates fixed to the moving member facing the cores
resulting innecessary force for linear motion (similar to
that inalinear stepper motor).
With detailed diagrams and design I met
Professor M. Bhattacharrya in the Electrical Machines
Lab for his suggestions and advice. He patiently
listened to the whole idea and encouraging me (as if I
was in the process of inventing something new and
great) said „why not give A.C. supply instead of D.C.
supply‟. To this I said „Sir, why not provide a 3-phase
distributed winding in the core like in an induction
motor and energies the three-phases with 3-phase
A.C.‟. He just said „Good. Go ahead.‟ Thus
unknowingly my journey with Linear Induction Motor
(LIM) started. The working model was made and
exhibited in room no. F-5 (Rampur Hall) near the first
pillar on the left side. Objects of different shapes made
of aluminum were shown moving from one end of the
core to the other in a linear direction along the length of
the core when the winding was energized. I was feeling
great as if I have done something really great, till a
visitor after seeing the exhibit said that a similar
machine was made by Professor E. R. Laithwaite long
back. I met Professor Bhattacharryathe next day and
asked him „Sir,do you know this fact‟. He coolly said
„Yes‟. I was pained (I do not know why) and
complained „Sir why did you not tell me this during the
first meeting itself so that I would not have exhibited my
ignorance and felt embarrassed‟. The words he spoke
after this have inspired me and encouraged me during
all the development work that I have done and narrated
in this article. He said, “If I had told you earlier you
would not have experienced in you the ability to
create/invent something new. Now you have
confidence that you can also think original and may
be in future you may make new things”. I can say that
this is a true quality of a teacher wherein a teacher not
only teaches but creates opportunity in his student to
realize the inherent strengths/weaknesses in him/her.
His words did come true at many occasions whenever
*Professor, Department of Electrical Engineering, IIT (BHU), Varanasi-221005
3. a new machine was made and for all this I give credit
to him.
Now I will take you along with this journey from
1971 till date highlighting milestones and pitfalls and
also the positive effect of a good teacher.
Period 1971 to 1972
During this period I continued with development of
LIM for shuttle propulsion in power looms as one of
the industrialist of Varanasi showed interest and offered
to support for development of handloom propelled by
LIM. During implementation shortcomings were
observed and three modified versions of the system
were made as shown in Figs.1-3. Fig. 3 shows a novel
geometry conceived and made by the author. It consists
of a Single Primary Double Secondary LIM (1972).
This was modified later by fitting bearings for
movement and lateral guidance of an Overhead
transport system. The running-rails apart from
mechanical strength to the overhead system also
provided return-path for magnetic flux, thusthere was
additional requirement of Aluminum Reaction Rail
only (1983) and a net saving of backing iron along the
length of track which would have been provide
otherwise for strengthening the magnetic circuit.
Fig.1 Back to back 3-phase LIM for automatic
shuttle propulsion (1971)
Fig.2 single phase LIM with starting windings at the
ends for producing starting force (1972)
Fig.3Single Primary Double Secondary LIM (fitted
with bearings for movement and lateral guidance of
OH transport system) [1972, 1983]
The small motor has carried the load of 1-adult/2-
children and has application in over-head transport
system.
The 1972 M. Tech. project report based on the work
concluded as follows:
“The study of various types of linear oscillating
induction motors made has clearly shown the
possibility of developing self-oscillating/switch-
oscillating linear motors operating on three-
phase/single-phase supply systems. The conclusions
drawn out by consideration of force/speed
characteristics and mathematical analysis of
respective machines clearly indicate a definite
possibility of developing a method of designing of
such machines. It must be realized that the perpetual
oscillation of these machines and their constructional
features make them one of the most complex of the
electromagnetic devices and these are, therefore, not
amenable to any simple analytical treatment.
Moreover, the basic shortcoming of such
machines is the existence of an inherent mechanical
friction and the problem of perfect alignment. The
ideal arrangement will be one in which the runner
moves in air under the influence of electromagnetic
field developed in such machines, without touching the
stationary member. The above motion must always
maintain a constant „air-gap length‟ through its
MY JOURNEY WITH LINEAR INDUCTION MOTOR 179
4. length of traverse. Another requirement to make an
ideal machine is a long bed of traverse – preferably
lying between -∞ and +∞. Although none of the above
requirements are practical, they do point towards
definite possibility of further development.”
Period 1973 to 1978
The concluding remarks of the report were
challenging hence I got registered with Professor M.
Bhattacharrya in 1973 to work further on this problem.
We had long sittings in the Department and in his
RajputanaHostel warden quarter. Then one day he said,
“Som now the time has come that you go out and get
far better environment, facilities and exposure”. This
again exhibited the greatnesses of Professor M.
Bhattacharrya because normally not many Ph.D.
supervisors will tell this to their research scholars. I was
bit disturbed but then the „Government of India‟s
National Scholarship for Study Abroad‟ award letter
indicating that with this scholarship I could go to any
part of the world to work in the field of LIM. I was
excited and contacted the giants in this subject at that
time - Professor E. R. Laithwaite at Imperial College
of Science & Technology, London, and through him
Professor A. J. Ellision, Head of Electrical
Engineering Department, The City University, London,
Professor SakaeYammamura of Tokyo University,
Japan, and Professor S. A. Nasar of University of
Kentucky, USA. I got encouragement and positive
response from all three of them.
Now came the problem of choosing a country
from these three countries for which I got the guidance
from Professor R. J. Galgali, Department of Chemistry,
BHU – a God gifted person who helped so many in so
many ways during his stay in BHU.Based on his
analysis and intuition he said „you go to London, the
UK - a country which has the roots of the subject and
Professor E. R. Laithwaite is known as the father of
Linear Induction Motors‟.
My correspondences with Professor E. R.
Laithwaite, Professor S. A. Nasar, Professor Sakae
Yammauraand Professor A. J. Ellisionfor seeking
possibility of doing research under them have been a
memorable part of my journey with LIM. It is
memorable because these correspondences reflect the
nature and seriousness which these professors had for
the prospective research scholars – and this is essential
even now. Excerpts from the lettersof Professor E. R.
Laithwaite are given below to show how helpful and
considerate he has been in his correspondence.
“….All these things are indicative of toils and
troubles of a professor at Imperial College. If you were to
register for Ph. D. you will be supervised by me, as Dr.
Eastham is leaving, and I have already so little time for
casual visitors, it would not be fair to ask you to work with
me at this time.”
April 4, 1973
“….May I first offer you my sincere congratulations
on being awarded the National Scholarship for Study
Abroad. What I said earlier is still true. It would be unfair
for someone like yourself to be under my direct supervision,
as my outside commitments are so heavy that it could well be
that we will talk to each other only twice a year.
However, we have very close ties with City
University…..there my personal friend Professor A. J. Ellison
is working on linear motors……would be willing to accept
you…..and it would mean that you still have access to me,
probably for longer than if you worked in my
department………..
I hope you will do this and I will have the pleasure of
meeting you before the end of this year.” May 17, 1973
The net outcome of the correspondence was that I
joined The City University (TCU), London, and after
meeting my guide Professor A. J. Ellision I visited
Imperial College of Science & Technology, London,
to report to Professor E. R. Laithwaite and take his
advice and direction for my research in TCU. The few
hours meeting was a memorable one as every word of
his within a short time had enchanted me with the
greatness of linear induction motors as experienced by
him. He demonstrated so many working systems he
had made to understand „what is induction motor‟ (as
he had often repeated during his class lectures that he
has not been able to understand what induction is). He
also demonstrated his famous transverse flux linear
induction motor. I was asked to hold a small „vehicle‟
(with secondary aluminum plate underneath) from one
end of the transverse flux linear induction motor
primary member and leave it when he tells me. To my
surprise the vehicle left by me on the track „flew‟ over
the entire length of transverse flux linear induction
motor primary member without touching the track
or falling sideways due to the presence of
electromagnetic forces of levitation and lateral
guidance produced in what he called the „magnetic-
river‟ created by him. The vehicle was caught by him
at the other end. During this meeting Professor
Laithwaite also told me not to rush for a quick degree
180 PRAJÑĀ : Vol. 60, Part-02, Year 2014-15 : Special Issue on "Science & Technology"
5. but do a good work. He also told me that it took him
seven years to obtain his Ph.D. degree. Perhaps he
observed some reaction on my face and reacted
immediately, „It‟s not that I did not do much during this
period. It got delayed because I did not have time to put
all my work in a thesis form.‟ After this I met him
many times without any problem, attended his inspiring
lectures and watched his BBC Christmas Special
Lectures. I remember each and every bit of it.
My Stay at the City University, London
My guide Professor A. J. Ellision right from
day one had been very kind to me and gave me time
whenever I wanted to discuss my research progress and
take his advice. By nature he was also very friendly and
kind to everyone and this quality of his benefitted me a
lot as whenever (while meeting a person from
universities and industriesin and around London) I told
that I am working with Professor A. J. Ellision he/she
would offer to help me in my research work in
whatever way it was possible for him/her. I was thus
able to effectively integrate the rich academic and
industrial exposure which I received in the UK and also
in European citieswhich I visited with IEE and IEEE
Students Travel Scholarships.
During one of the initial meetings when I told
him that I understand the inputs and outputs of an
electromagnetic system but not what is happening in
the electromagnetic system. He said do you want to go
inside this black-box? Do you have the courage? My
reply was „yes‟as I wanted to explore the links between
the electrical input and mechanical output of an
electromagnetic system. I knew that till I do not
understand this I will never be able to effectively design
these electromagnetic systems by providing a balance
between all the five basic circuits of electromagnetic
device viz. electrical, magnetic, mechanical, thermal
and dielectric circuits of an electromagnetic system. He
gave me green signal.
In yet another meeting after about six
months when I approached him with a proposal to
make circular transverse flux induction motor so
that one can test transverse flux induction motor
under dynamic conditions (as the set-up at Imperial
College of Science & Technology, London, was
good for standstill tests only). I had located
U-shaped stampings in the Department store and
had drawn a diagram also. He patiently listened
to me and said „OK you play with this till we
finalize your research plan‟. This resulted in
development of Basic transverse Flux Circular
Motor. When it was shown to the professors of
Imperial College of Science & Technology, London,
one of them - Professor Freeman - remarked „Oh God
this is a missing link between all the electric motors
made so far‟. Later BTFCM was placed as an exhibit
during IEEE INTERMAG-75 at Imperial College of
Science & Technology, London, - the only exhibit
from a research scholar as all other exhibits were of
senior professors.
Through research a link between the electrical
inputs and mechanical outputs via magnetic circuit was
thoroughly analyzed using the Maxwell‟s equations and
Maxwell‟s Second Stress Tensor. The predicted 3-
components of flux densities, forces and the
performance closely matched with the experimental
results obtained from BTFCM under dynamic
conditions. The work was appreciated by IEE (UK)
through “IEE Student Premium Award‟.
Back in BHU1978 onwards – activities &
milestones
On return I had planned to integrate the
knowledge gathered in London to remove the
weaknesses of the working system developed before
going to London. In achieving this objective the
encouragement and support received from Professor
G. Rajsekar needs special mention. He, after looking at
my thesis, asked me „Can you translate your research
into working systems to demonstrate the principle?‟
My reply was in affirmative. I told him that the main
difficulty was in the laying of track along which the
system has to move. He took this as a challenge and in
his own dynamic way persuaded his friend Mr. K. P.
Jairam, the then General Manger, DLW, Varanasi, to
extend support for making the working system. I am
grateful to DLW, its Officers and workers who whole
heartedly extended help to make the whole system as it
was unconventional in many ways. The 1:15 scale
LIM based BHU-DLW surface transport model
moving along 33-m oval track was later exhibited
number of times in the Railway Pavelion of India
International Fairs at Pragati Maidan, New Delhi.
Being the only working system of its type in the
country, it attracted attention of the visitors including
the then Prime Minister of India Shri Rajeev Gandhi
who remarked to ShriMadhaoRaoScindia, the then
Railway minister that „this could be the future
transport system for India‟.
Since then a large number of LIM based
working systems including a full-scale system carrying
MY JOURNEY WITH LINEAR INDUCTION MOTOR 181
6. about 20-adults moving along 65-m meter-gauge track
has been made with the help of UG/PG students and
financial support from organizations like AICTE.
To cut the long story short I willnarrate my journey
through photographs and brief description of some of
the working systems developed along withtheir
usefulness.
(a) 1:15 scale LIM based BHU-DLW Surface
Transport working System moving along 33m
oval track [1981, 2001]
Fig 4 ShriDigvijay Singh, Min of State for Railways,
Professor YC Simadhari, VC-BHU &Shri O. P.
Gupta, GM, DLW, inspecting 15:1 BHU-DLW
LIM Surface Transport System [2001]
The trolley safely moves along very sharp curves
(with about 6-m diameter even at 16kmph) due to the
presence of force of attraction between the moving
primary iron & the secondary reaction rail. A unique
feature of LIM based system in contrast to any other
conventional wheel-rail/road systems wherein (with
increase in speed) the wheel-rail/road grip becomes
poor leading to accidents.
The working system effectively bridges the gap
between the technology & decision makers as it
explains the principle of operation and the inherent
advantages easily.
(b) LIM based surface transport system for
underground metro moving along 65-m
meter-gauge track at Malaviya Center for
Development of LIM Propelled Rail Metro
System: [1997, 1998, 2001]
Working system was primarily made to verify
the developed design methodology. It also
demonstrated the indigenous capabilities developed in
the design/fabrication of LIM based systems as per
specifications.
Fig 5 Trolley with LIM Primary lifted-up to show the
underside arrangement
Fig 6 Trolley fitted with LIM Primary operating on 65m
meter-gauge track &Shri. S.K.Khanna, MEL, IR Board,
Shri O. P. Gupta, GM, DLW, &Shri J. Upadhyay, Ex-
MEL, IR Board doing foot-plate inspection of the LIM
Propelled Rail Metro System
Fig 7 ShriDigvijay Singh, Min of State for Railways,
Professor Y.C. Simadhari, VC-BHU & Prof. P. C.
Upadhyay, Registrar BHU, doing foot-plate inspection
[2001]
182 PRAJÑĀ : Vol. 60, Part-02, Year 2014-15 : Special Issue on "Science & Technology"
7. The working system attracted attention of
decision makers like the then Minister of State for
Railways, present & former Indian Railway Board
Members (Elect.).
The system also attracted attention of press & TV
media and its working along with the Institute R&D has
been widely reported by many TV channels including
„Imaging Sciences‟ programme of national DD TV.
The working system has acted as an effective
bridge between the technology and prototype stage for
adoption.
(c) LIM Powered People Mover system for closed-
loop circular track for Connaught Place people
transport system. (The moving platform at 5-10
kmph can complete one circle in 15-30 min)
[1986, 2013]
Fig 8 LIM Powered People Mover system for closed-loop
circular track for Connaught Place people transport
system
The model demonstrates feasibility of integration
between metro terminals and other public transport
modes as well as the shopping points in city-centers
like Connaught Place. The cost analysis has been done
and the proposal has been recently presented in two
international conferences. International reactions are
being received
(d) LIM based ropeways in which the rope is
stationery [2010, 2011]
Made primarily to demonstrate the principle of
ropeways in which the rope is stationery and the
trolley moves due to linear force produced by LIM
mounted on the trolley.
Since moving parts are only the wheels on bearings
(with no drum/gears connecting to the electric motor or
the moving-ropes) the maintenance will be bare
minimum. It has provision for remote monitoring
and control.
The proposal can be implemented in regions
where other modes of transport are neither feasible nor
economical and the ropeways are the only choice.
Fig 9 LIM based ropeways in which the rope is stationery
Concluding remarks & suggestion for further work
One important thing brought out in this article needs
special mention again. The role of teachers like
Professor M. Bhattacharrya, Professor G. Rajsekar,
Professor E. R. Laithwaite, Professor A. J. Ellison, who
had so coolly played their role in shaping me and my
work on LIM needs to be appreciated for the fact that
the role of a good teacher is the most essentialfactor in
shaping the „future-components‟ of the society viz. the
Man. The technological developments may assist a
teacher but these shall never be able to become a
substitute for the qualities of a good teacher.
Another point which I would like to highlight here
is the international interest shown in LIM activities
by countries like Japan. In February 2007 Mr.
Masahiro Ando, P.E. Professional Engineer as
Authorized by the Japanese Government &Dr. Vijay
Kumar Jatiya Funakawa Information & Environment
Technology Co. Ltd., Tokyo, and Manager dealing
in Business Planning & International Business
Operations, visited for discussions for providing
an effective solution to the ever-growing
MY JOURNEY WITH LINEAR INDUCTION MOTOR 183
9. Engineering and Technology and Professor
Department Electrical Engineering IT–BHU, traced
the history of LIM R&D activities in the Department.
He wondered that if the country had implemented the
Departmental proposal made in early 80‟s, India would
have been leaders in this field by now. He was hopeful
that now thevisit of Mr. Ando and Dr. Jatiya will lead
to an effective integration of the „rich experience of
Japanese Subway Association (JSA) in the
implementation of Linear Metro in Japan‟ with the
„fundamental LIM based R&D achievements of IT–
BHU‟.He was optimistic and confident that jointly the
two organizations can provide a solution for the urban
transportation problem in India and all over the world.
Mr. Ando who is „father of linear metro in
Japan‟ appreciated the R&D in BHU and felt a need
for exploring the possibility of solving the urban
transportation problem in Indian cities through linear
metro. There was a general consensus that the
Government of India and the Government of Japan
may be requested to initiate steps for joint
ventures/participation in making Linear Metro based
joint project proposals for Indian cities. To start with
the first Linear Metro may be made operational in
Varanasi as it would be a fitting tribute to
Mahamana Pandit Madan Mohan Malaviyaji – the
founder of Banaras Hindu University. The other
reasons being that:
Due to Sarnath many Japanese visit Varanasi and
this will help them in moving around comfortably
Any activity in Varanasi catches attention the
world-over, and
The R&D at BHU can be easily integrated.
Since then efforts were made at many levels to
initiate the activity between Japan and Varanasi but
with no success so far. It is expected that with renewed
efforts being made with the new ministry at the center
wherein Varanasi happens to be the Prime Minister‟s
constituency, the proposal may come through.
During the years a large number of
technologies/working-systems have been developed
and are ready for adoption by the user industries.
These are:
a. LIM powered systems for:
(i) Overhead/Underground/Surface transportation,
(ii) Material Handling,
(iii) Ropeways in which the rope does not move,
(iv) Vertical elevators for vehicle parking,
(v) People mover system for Connaught Place
b. Control strategies for energy saving in LIM
based systems including independent control of
propulsion & attraction forces produced
c. Handloom for visually handicapped.
Journey with a subject never ends.
People/researchers may change but so far as the R&D
in the subject is concerned it continues and I have all
hope that this will happen in our Department also. In
this regard it is worthwhile now to explore the
possibility of industry/academic-institution
participation for further development and effective
absorption of Linear Induction Motor (LIM) based
systems which have been developed & tested in the
Department.
Acknowledgement
Following individuals & Agencies support is
gratefully acknowledged:
MHRD/AICTE 1994-2000: For R&D Grants
to develop LIM propelled transport system operating
with 15-adult load on a 65-m meter-gauge track for
demonstrating the technical feasibility
Prof. Hari Gautam 1996(the then VC BHU &
later Chairman UGC): For supporting creation of
Malaviya Centre for “Development and Evaluation
of Low Cost LIM Propelled Rail Metro System” in
IT-BHU.
Shri Jagdish Upadhyay 1994-2000(Former
Member Electrical Railway Board, Visiting Professor
& Advisor AICTE project entitled LIM Propelled Rail
Metro System): For giving a practical shape to LIM
traction R&D activities and projecting it for its
adoption in India.
Professor M. Bhattacharrya (since 1973) for
starting my journey with LIM and Professor G.
Rajsekar (since 1977) for providing the necessary
thrust which was a great helped in making of BHU-
DLW model that helped in bridging the gap between
the technology and the decision makers.
„Government of India‟s National
Scholarship for Study Abroad‟ (1973-77) that helped
in acquiring advanced knowledge related to LIM
technology from abroad.
MY JOURNEY WITH LINEAR INDUCTION MOTOR 185
10. Graduate, Post-graduate & Research
Scholars 1977 till date: For assistance in fabricating
LIM powered working models of various applications
to demonstrate principle of LIM propulsion.
References
[1] S. N. Mahendra: Linear oscillating induction
motors, M. Tech. Project under Professor M.
Bhattacharry submitted in Dept of Elect. Engg.,
IT-BHU, 1982
[2] Mahendra, S.N. &Upadhyay, J.:Low-Cost LIM
Propelled Metro System for Indian Cities, Urban
Railways, v 2, Issue II, Nov. 1999, p 15-21.
[3] S.N. Mahendra, and J. Upadhyay, R&D Project
at IT-BHU for Development of LIM Propelled
Rail Metro for Medium Size Indian Cities,8th
World Conference on Transport Research
(WCTR-98), Antwerp, Belgium, July 12-17, 1998.
Special Interest Group (SIG-1): Urban
Development Problems.
[4] S. N. Mahendra, Ayan Das, Shailendra. N
Jaiswal:„Segmented LIM based Passenger
Conveyor System for Circular Route: A Case
Study‟, Research SymposiumUrban Mobility
India (UMI) Conference and Expo, New Delhi,
2013http://www.scribd.com/doc/189741371/Linea
r-Induction-Motor-based-Passenger-Conveyor-
System
[5] S N Mahendra & S Jaiswal,“Linear Induction
Motor Propelled Pms For Closed Loop Circular
Track”, International Conference on Transportation
system studies, IIT Delhi, 1986
[6] Raj Kumar Sinha& Naidu VenkatramanaRao:
„LIM based ropeways‟, B. Tech. Project submitted
under Professor S. N. Mahendra in Dept of Elect.
Engg., IIT (BHU), 2010
[7] Anuj Kumar:„Design and Analysis of Traction
Elevators‟,M. Tech. dissertation submitted under
Professor S. N. Mahendra in Dept of Elect. Engg.,
IIT (BHU), 2013
[8] LakshmareddyDondeti:„Performance analysis of
LIM based ropeway system operating under
various supply conditions‟, M. Tech. dissertation
submitted under Professor S. N. Mahendra in Dept
of Elect. Engg., IIT (BHU), 2011
[9] S. N. Mahendra, LakshmareddyDondeti, U.
Ram GopalVarma: Linear Induction Motor
Based Material Handling Systems for Saving
Clean Energy, IEI International Conference on
“Green Power Generation: Vision 2020”, IEI
Anpara Local Centre, Sonebhadra, Renusagar, 10th
to 12th
December, 2010
[10] S. N. Mahendra: Current & flux distributions,
forces &stiffnesses in Linear Induction
Machines Ph. D. thesis submitted under AJ
Ellision at The City University, London, 1977.
[11] S.N. Mahendra: LIM Based Traction:
Philosophy, Selection, Design-aspects &
Application to Transport Sector, International
Workshop on „LIM Propelled Rail Metro System‟
Department of Electrical Engineering, IT-BHU,
January 8-9, 1999, pA-1 to A21.
[12] S. N. Mahendra, SrihariVelisetti, Kunwar
Aditya: „Implementation of VVVF, CVVF
&CFVV Control Strategies for Control of
LIM‟,IEEE 3rd
International Conference on
Sustainable Energy Technologies (ICSET 2004),
Kathmandu, Nepal, pp 141-145.
[13] Power point presentation of Mr. Masahiro Ando,
P.E. Professional Engineer as Authorized by the
Japanese Government in February 2007 in
Department of Electrical Engineering, IT-BHU,
Varanasi.
186 PRAJÑĀ : Vol. 60, Part-02, Year 2014-15 : Special Issue on "Science & Technology"