J. Gregg 100875103 - Parapet Detail 7 TYPICAL FLASHING DETAIL @ PARAPET
•
2 likes•2,954 views
This document provides a typical flashing detail for a parapet. It includes a drawing and legend that show how the various materials come together around the parapet, including a modified cap sheet, prefinished metal flashing, wood blocking with insulation, and steel siding. Dimensions are provided for things like the slope, cant strip height, and extension of cap sheets. The drawing is labeled as a detail for a typical flashing installation at a parapet for the George Brown College Health Sciences building project.
Report
Share
Report
Share
Download to read offline
Recommended
Car park bq
This document contains a bill of quantities for the construction of a parking carpark at Taylor's University. It includes 6 items with rates and quantities for excavation works, concrete works, building works, plaster works, finishing works, and electrical works. Some of the key elements are excavating 1,050 sqm of land, laying 1,000 sqm of interlocking tiles, constructing concrete footings and beams totaling 24 cubic meters, building 400 sqm of hollow cement blocks, and installing outdoor lighting fixtures and electrical cables. The total estimated cost for all items is RM59,386.
Catalogue moulds for precast concrete Moldtech
Moldtech provides innovative mould solutions for precast concrete elements ranging from custom moulds to turnkey plants. Their factory covers over 10,000 square meters and features modern production technology. They offer full service from design to installation and after-sales support. Moldtech exports products to four continents with international sales accounting for 80% of revenue.
Pre Engineered buildings
Pre-engineered buildings are factory-built steel structures that are shipped to sites in pieces and bolted together for quick assembly. They are rectangular structures enclosed in corrugated metal sheeting. PEB construction is fast because foundations are poured while factory fabrication occurs. PEBs have primary and secondary structural elements, roof/wall panels, and accessories. They provide benefits like reduced construction time, lower costs, flexibility for expansion, large clear spans, quality control, and energy efficiency. However, they also have disadvantages like corrosion sensitivity, added insulation costs, and limited design customization. PEBs are commonly used for warehouses, factories, workshops, and other industrial and commercial buildings.
Porta Cabin Presentation
The document describes the materials and specifications for roof and wall cladding, partitions, fire rating, flashing, doors, windows, and electrical components of prefabricated building modules. The roof and wall cladding and partitions have an outer layer of 0.7mm thick galvanized iron coated with white plastic, and insulation of 80mm or 50mm thick polyurethane foam. Doors and windows are also specified. The materials and construction meet appropriate fire and insulation standards. Electrical works include embedded conduits and junction boxes. The modules are single kitchen and bathroom units produced by AMCO Engineering in Rawalpindi, Pakistan.
Measurement II BQ
This document contains a bill of quantities for external and internal wall finishes, external and internal floor finishes, external and internal ceiling finishes for a bungalow. The document lists various construction materials and their quantities, including clay brick walls, damp proof courses, plastering, painting, ceramic wall and floor tiles, cement screeding, ceiling boards and timber beadings. It provides the specifications, quantities and rates for each item to be used for the construction of the bungalow.
Sheet No - 28 - Details (11) - Structural Glazing Sloped @ Pharmacy
The document provides details on the construction of a building using structural glazing and a green roof system. It includes specifications for a precast concrete hollowcore floor slab, rigid insulation, screed, column, paving, and other flooring elements on the ground level. Above this, it describes the use of structural glazing panels supported by steel brackets, plates, and clamps along with insulation and sealants. A green roof system is installed above this consisting of a vapor barrier, growing medium, drainage layer, insulation, and ballasted roof membrane. Removable aluminum and steel components are included to allow access for repair and maintenance of the structural glazing.
Bq floor
This document provides a bill of quantities for internal floor finishes, listing various flooring materials and their quantities. It includes cement and sand beds and screeds to receive different types of ceramic and homogeneous tiles on floors, drops, and skirtings. The tiles listed are 200mm x 20mm x 8mm ceramic tiles, 200mm x 20mm x 8mm anti-slip ceramic tiles, and 300mm x 300mm x 8mm homogeneous tiles, along with their quantities to be laid on floors, drops at different heights, and skirtings. The totals are collected at the end.
Recommended
Car park bq
This document contains a bill of quantities for the construction of a parking carpark at Taylor's University. It includes 6 items with rates and quantities for excavation works, concrete works, building works, plaster works, finishing works, and electrical works. Some of the key elements are excavating 1,050 sqm of land, laying 1,000 sqm of interlocking tiles, constructing concrete footings and beams totaling 24 cubic meters, building 400 sqm of hollow cement blocks, and installing outdoor lighting fixtures and electrical cables. The total estimated cost for all items is RM59,386.
Catalogue moulds for precast concrete Moldtech
Moldtech provides innovative mould solutions for precast concrete elements ranging from custom moulds to turnkey plants. Their factory covers over 10,000 square meters and features modern production technology. They offer full service from design to installation and after-sales support. Moldtech exports products to four continents with international sales accounting for 80% of revenue.
Pre Engineered buildings
Pre-engineered buildings are factory-built steel structures that are shipped to sites in pieces and bolted together for quick assembly. They are rectangular structures enclosed in corrugated metal sheeting. PEB construction is fast because foundations are poured while factory fabrication occurs. PEBs have primary and secondary structural elements, roof/wall panels, and accessories. They provide benefits like reduced construction time, lower costs, flexibility for expansion, large clear spans, quality control, and energy efficiency. However, they also have disadvantages like corrosion sensitivity, added insulation costs, and limited design customization. PEBs are commonly used for warehouses, factories, workshops, and other industrial and commercial buildings.
Porta Cabin Presentation
The document describes the materials and specifications for roof and wall cladding, partitions, fire rating, flashing, doors, windows, and electrical components of prefabricated building modules. The roof and wall cladding and partitions have an outer layer of 0.7mm thick galvanized iron coated with white plastic, and insulation of 80mm or 50mm thick polyurethane foam. Doors and windows are also specified. The materials and construction meet appropriate fire and insulation standards. Electrical works include embedded conduits and junction boxes. The modules are single kitchen and bathroom units produced by AMCO Engineering in Rawalpindi, Pakistan.
Measurement II BQ
This document contains a bill of quantities for external and internal wall finishes, external and internal floor finishes, external and internal ceiling finishes for a bungalow. The document lists various construction materials and their quantities, including clay brick walls, damp proof courses, plastering, painting, ceramic wall and floor tiles, cement screeding, ceiling boards and timber beadings. It provides the specifications, quantities and rates for each item to be used for the construction of the bungalow.
Sheet No - 28 - Details (11) - Structural Glazing Sloped @ Pharmacy
The document provides details on the construction of a building using structural glazing and a green roof system. It includes specifications for a precast concrete hollowcore floor slab, rigid insulation, screed, column, paving, and other flooring elements on the ground level. Above this, it describes the use of structural glazing panels supported by steel brackets, plates, and clamps along with insulation and sealants. A green roof system is installed above this consisting of a vapor barrier, growing medium, drainage layer, insulation, and ballasted roof membrane. Removable aluminum and steel components are included to allow access for repair and maintenance of the structural glazing.
Bq floor
This document provides a bill of quantities for internal floor finishes, listing various flooring materials and their quantities. It includes cement and sand beds and screeds to receive different types of ceramic and homogeneous tiles on floors, drops, and skirtings. The tiles listed are 200mm x 20mm x 8mm ceramic tiles, 200mm x 20mm x 8mm anti-slip ceramic tiles, and 300mm x 300mm x 8mm homogeneous tiles, along with their quantities to be laid on floors, drops at different heights, and skirtings. The totals are collected at the end.
Construction Material Estimate with MS Excel file
Learn the material estimation for PCC, RCC, Brick Masonry, and Plaster. A ready to use excel file is available to download through a hyperlink in the pdf.
5) int walls finishes bq
This document is a bill listing materials and labor costs for internal wall finishes of a multipurpose hall. It includes 728 square meters of cement and sand plastering at RM19 per square meter, 89 square meters of cement and sand screeding at RM19 per square meter to receive ceramic tiles, 89 square meters of glazed ceramic wall tiles laid at RM200 per square meter, and 728 square meters of emulsion painting at an unknown rate. The total cost of internal wall finishes is summarized at the bottom.
Pre caste Concrete
Plant-cast precast concrete elements are constructed in a controlled factory environment using reusable steel forms. This allows for higher quality and efficiency than site-cast concrete. Elements like beams, slabs, columns and walls are reinforced with steel and cured quickly so they can be transported and assembled on-site like structural steel framing. Joints are connected using embedded plates and angles then grouted to form integrated, durable structures.
TALAT Lecture 2104.01: Case Study on Glass Roof
This lecture provides the teacher and students with a basis to develop sound and appropriate glass and aluminium roof designs; it explains the principles behind good design. After working through the course, the students will be in a position to design a glass roof which meets the requirements of local building regulations, and which is suited to the national traditions of the destination markets. This includes the collection of data on the local climate, because the product needs to withstand the climatic conditions in the different regions of the market. Safety and functionality are also important parameters of the finished product. Basic design engineering background, basic knowledge of corrosion effects, and some familiarity with TALAT lecture series 2100, 2200 and 5104 is assumed.
Final Bills of Quantity
This document contains a bill of quantities for a Class D bungalow project. It includes item descriptions, quantities, units, and rates for external walls, internal walls, wall finishes, floor finishes, ceiling finishes, and a summary page. Quantities and costs are provided for various construction materials and tasks such as brickwork, plastering, tiling, and painting of walls, floors and ceilings of the bungalow.
Earthquake resistant design
PRESNTATION ON EARTHQUAKE RESISTANT DESIGN FOR ARCHITECTURE & CIVIL ENGINEERS. Have fun & All the Beast.
Building Construction 02 (Project1)
The document describes a student group project to design and construct a 1:5 scale model of a temporary bus shelter. It includes sections on design process, technical drawings, construction details, material selection, construction process, force analysis, and accessibility considerations. The group's final design uses a steel frame structure with a timber deck floor and polycarbonate roof. Key joints include a pad foundation, floor joist connections, and welded column-beam connections. The construction process is documented, highlighting the foundation pouring, floor assembly, and roof installation. Force analysis examines load distribution and concentrated loads. Weather resistance and sun orientation are also addressed.
Building ornament
Ornament is a decoration used to embellish parts of a building or object, excluding large figurative elements like sculpture. Architectural ornament can be carved from stone, wood, or metal, formed with plaster or clay, or painted onto surfaces. Common types of ornament include carved stone, wood, metal, cast iron, plaster, painted, ceiling, dome, floor, columns, and exterior house ornamentation.
Boq piling works
The document discusses measurement quantities for piling works. It describes that piles are building structures that receive and spread loads underground. Piles come in various sizes and types depending on soil conditions, design loads, and site requirements. The document provides classifications of piles by material and lists typical sequences of piling work. It includes examples of taking off lists, query lists, and a schedule of pile caps and types of piles.
M3 EG BQ timber windows
This document provides a bill of quantities for doors and windows. It includes 3 sentences describing the items:
Precast concrete lintels reinforced with rebar and stirrups, packing pieces of pressure treated timber fixed to structures, and purpose made windows and frames of pressure treated timber including casement leaves, heads, jambs, mullions, and sills are included. Ironmongeries like hinges and locks for the windows along with glazing of glass in panes and painting of timber surfaces and windows with primer, undercoat and finish coats are also part of the bill of quantities. The rates provided are in Malaysian Ringgit per specified unit for each item such as per meter, number, or square meter.
M3 EG BQ metal frame door
This document provides a bill of quantities for door and window items including precast concrete lintels, metal door frames, timber flush doors, hinges, locks, and painting works. The items are priced per unit and include descriptions of materials and specifications. The total amount will be carried over to the collection page.
highland tower case study
This case details the tragedy of the 12-Floor Highland Towers Condominium collapsed on the ethical theories and codes of ethics in engineering practice perspective. This major disaster occurred in 1993 where it caused the deaths of 48 people and lead to the evacuation of the other two blocks due to safety concerns.. Block one collapsed due to the failed of the poorly constructed retaining walls and the high force of the landslide that equivalent to 200 Boeing 747 jets.
08-Working details-ceiling-Knauf metal profiles_brochure
Knauf produces precision-engineered metal profiles and accessories for complete drywall systems. Their profiles are made from high-grade galvanized steel and are designed for quality, rigidity, simplicity, compatibility and variety. Knauf offers a wide range of studs, tracks, channels and accessories that are specially engineered to work together for partition, wall lining, ceiling and other drywall system applications.
Bill of Quantities ( Door and Window )
This document provides specifications for a timber louvred window and timber frame door for an intermediate apartment type B. It includes details on the precast concrete lintel and packing piece. For the window, it specifies aluminum adjustable louvre frames with clear glass panels. For the door, it outlines the timber door frame and leaf dimensions and ironmongeries to be supplied and installed. Both require preparation and multiple coats of primer and paint.
BUILDING TECHNOLOGY 2: Project 2- Working Drawing- Construction Drawing
This document contains construction drawings for a proposed 5-storey film theatre building, including floor plans, sections, and elevations. Key features shown are a basement car park, ground floor retail spaces, and upper floors containing a theatre, cafe, studios, and roof garden. Construction details illustrate structural elements like concrete slabs, walls, and steel framing. Dimensions and technical specifications are provided to fully convey the building design for construction.
General structural notes
This document provides general structural notes for a project involving the evaluation of existing floor framing between grid lines F-4 to F-8 and H-4 to H-8 at the Chamberlain SMD facility in Nogales, Sonora. It specifies design loads, construction materials, contractor responsibilities, and details structural steel requirements. It also outlines the statement of special inspection, naming the structural engineer as special inspector and defining inspection duties.
Mezzanine floor system in Chennai|Vijayawada|Nellore|Mumbai|Pune|Delhi|Tric...
https://g.page/steelrackmanufacturers?share
http://steelrackmanufacturers.com/Departmental-Storage-Rack.html
http://steelrackmanufacturers.com/HeavyDuty-Rack.html
http://steelrackmanufacturers.com/Industrial-Rack.html
http://steelrackmanufacturers.com/Storage-Rack.html
http://steelrackmanufacturers.com/Steel-Rack.html
http://steelrackmanufacturers.com/mobile-rack-manufacturers-chennai-tamilnadu-india.html
http://steelrackmanufacturers.com/RacK.html
http://steelrackmanufacturers.com/garment-display-rack-manufacturers-chennai-tamilnadu-india.html
http://steelrackmanufacturers.com/mobile-racking-system-manufacturers-chennai-tamilnadu-india.html
http://steelrackmanufacturers.com/Supermarket-Rack.html
http://steelrackmanufacturers.com/two-tier-racks.html
http://steelrackmanufacturers.com/retail-display-racks.html
http://steelrackmanufacturers.com/pallet-racking-system.html
https://mezzanineflooringinchennai.blogspot.com/
https://storagerackmanufacturersinchennai.blogspot.com/
https://steelrackmanufacturersinchennai.blogspot.com/
https://rackmanufacturersinchennai.blogspot.com/
https://supermarketrackschennai.blogspot.com/
https://retaildisplayrackschennai.blogspot.com/
https://departmentalstoragerackchennai.blogspot.com/
https://rackingsystemchennai.blogspot.com/
https://heavydutyrackchennai.blogspot.com/
https://g.page/steelrackmanufacturers?share
http://steelrackmanufacturers.com/Mezzanine-Flooring.html
http://steelrackmanufacturers.com/Mezzanine-Floor-Construction.html
http://steelrackmanufacturers.com/Blog-mezzanine-flooring-manufacturers.html
http://steelrackmanufacturers.com/Mezzanine-Flooring-System.html
Construction Site Report
This construction site visit report summarizes a visit by students to the D'Latour construction site in Bandar Sunway, Selangor, Malaysia. The report describes the objectives of the visit which were to experience the construction site environment, understand safety procedures, visualize building materials and processes, and gain knowledge of machinery uses. Key observations from the site include the building foundations consisting of micropiles, use of post-tensioning and scaffolding, storage of materials, and different formwork types including timber, table, and steel forms. Photos document various construction elements, equipment, and the group visiting the site.
Curtain walls
The document presents information about curtain walls, including what they are, their history, components, construction systems, implications for designers, examples on campus, and concerns. Curtain walls are non-load bearing exterior walls attached to but not part of the structural frame of a building. They minimize air and water infiltration and were first used in the Hallidie Building in 1918. Their components include anchors, mullions, and vision glass. Common construction systems are stick, unit panel, unit mullion, and point-loaded structural glazing. Designers must consider factors like thermal performance and safety.
More Related Content
What's hot
Construction Material Estimate with MS Excel file
Learn the material estimation for PCC, RCC, Brick Masonry, and Plaster. A ready to use excel file is available to download through a hyperlink in the pdf.
5) int walls finishes bq
This document is a bill listing materials and labor costs for internal wall finishes of a multipurpose hall. It includes 728 square meters of cement and sand plastering at RM19 per square meter, 89 square meters of cement and sand screeding at RM19 per square meter to receive ceramic tiles, 89 square meters of glazed ceramic wall tiles laid at RM200 per square meter, and 728 square meters of emulsion painting at an unknown rate. The total cost of internal wall finishes is summarized at the bottom.
Pre caste Concrete
Plant-cast precast concrete elements are constructed in a controlled factory environment using reusable steel forms. This allows for higher quality and efficiency than site-cast concrete. Elements like beams, slabs, columns and walls are reinforced with steel and cured quickly so they can be transported and assembled on-site like structural steel framing. Joints are connected using embedded plates and angles then grouted to form integrated, durable structures.
TALAT Lecture 2104.01: Case Study on Glass Roof
This lecture provides the teacher and students with a basis to develop sound and appropriate glass and aluminium roof designs; it explains the principles behind good design. After working through the course, the students will be in a position to design a glass roof which meets the requirements of local building regulations, and which is suited to the national traditions of the destination markets. This includes the collection of data on the local climate, because the product needs to withstand the climatic conditions in the different regions of the market. Safety and functionality are also important parameters of the finished product. Basic design engineering background, basic knowledge of corrosion effects, and some familiarity with TALAT lecture series 2100, 2200 and 5104 is assumed.
Final Bills of Quantity
This document contains a bill of quantities for a Class D bungalow project. It includes item descriptions, quantities, units, and rates for external walls, internal walls, wall finishes, floor finishes, ceiling finishes, and a summary page. Quantities and costs are provided for various construction materials and tasks such as brickwork, plastering, tiling, and painting of walls, floors and ceilings of the bungalow.
Earthquake resistant design
PRESNTATION ON EARTHQUAKE RESISTANT DESIGN FOR ARCHITECTURE & CIVIL ENGINEERS. Have fun & All the Beast.
Building Construction 02 (Project1)
The document describes a student group project to design and construct a 1:5 scale model of a temporary bus shelter. It includes sections on design process, technical drawings, construction details, material selection, construction process, force analysis, and accessibility considerations. The group's final design uses a steel frame structure with a timber deck floor and polycarbonate roof. Key joints include a pad foundation, floor joist connections, and welded column-beam connections. The construction process is documented, highlighting the foundation pouring, floor assembly, and roof installation. Force analysis examines load distribution and concentrated loads. Weather resistance and sun orientation are also addressed.
Building ornament
Ornament is a decoration used to embellish parts of a building or object, excluding large figurative elements like sculpture. Architectural ornament can be carved from stone, wood, or metal, formed with plaster or clay, or painted onto surfaces. Common types of ornament include carved stone, wood, metal, cast iron, plaster, painted, ceiling, dome, floor, columns, and exterior house ornamentation.
Boq piling works
The document discusses measurement quantities for piling works. It describes that piles are building structures that receive and spread loads underground. Piles come in various sizes and types depending on soil conditions, design loads, and site requirements. The document provides classifications of piles by material and lists typical sequences of piling work. It includes examples of taking off lists, query lists, and a schedule of pile caps and types of piles.
M3 EG BQ timber windows
This document provides a bill of quantities for doors and windows. It includes 3 sentences describing the items:
Precast concrete lintels reinforced with rebar and stirrups, packing pieces of pressure treated timber fixed to structures, and purpose made windows and frames of pressure treated timber including casement leaves, heads, jambs, mullions, and sills are included. Ironmongeries like hinges and locks for the windows along with glazing of glass in panes and painting of timber surfaces and windows with primer, undercoat and finish coats are also part of the bill of quantities. The rates provided are in Malaysian Ringgit per specified unit for each item such as per meter, number, or square meter.
M3 EG BQ metal frame door
This document provides a bill of quantities for door and window items including precast concrete lintels, metal door frames, timber flush doors, hinges, locks, and painting works. The items are priced per unit and include descriptions of materials and specifications. The total amount will be carried over to the collection page.
highland tower case study
This case details the tragedy of the 12-Floor Highland Towers Condominium collapsed on the ethical theories and codes of ethics in engineering practice perspective. This major disaster occurred in 1993 where it caused the deaths of 48 people and lead to the evacuation of the other two blocks due to safety concerns.. Block one collapsed due to the failed of the poorly constructed retaining walls and the high force of the landslide that equivalent to 200 Boeing 747 jets.
08-Working details-ceiling-Knauf metal profiles_brochure
Knauf produces precision-engineered metal profiles and accessories for complete drywall systems. Their profiles are made from high-grade galvanized steel and are designed for quality, rigidity, simplicity, compatibility and variety. Knauf offers a wide range of studs, tracks, channels and accessories that are specially engineered to work together for partition, wall lining, ceiling and other drywall system applications.
Bill of Quantities ( Door and Window )
This document provides specifications for a timber louvred window and timber frame door for an intermediate apartment type B. It includes details on the precast concrete lintel and packing piece. For the window, it specifies aluminum adjustable louvre frames with clear glass panels. For the door, it outlines the timber door frame and leaf dimensions and ironmongeries to be supplied and installed. Both require preparation and multiple coats of primer and paint.
BUILDING TECHNOLOGY 2: Project 2- Working Drawing- Construction Drawing
This document contains construction drawings for a proposed 5-storey film theatre building, including floor plans, sections, and elevations. Key features shown are a basement car park, ground floor retail spaces, and upper floors containing a theatre, cafe, studios, and roof garden. Construction details illustrate structural elements like concrete slabs, walls, and steel framing. Dimensions and technical specifications are provided to fully convey the building design for construction.
General structural notes
This document provides general structural notes for a project involving the evaluation of existing floor framing between grid lines F-4 to F-8 and H-4 to H-8 at the Chamberlain SMD facility in Nogales, Sonora. It specifies design loads, construction materials, contractor responsibilities, and details structural steel requirements. It also outlines the statement of special inspection, naming the structural engineer as special inspector and defining inspection duties.
Mezzanine floor system in Chennai|Vijayawada|Nellore|Mumbai|Pune|Delhi|Tric...
https://g.page/steelrackmanufacturers?share
http://steelrackmanufacturers.com/Departmental-Storage-Rack.html
http://steelrackmanufacturers.com/HeavyDuty-Rack.html
http://steelrackmanufacturers.com/Industrial-Rack.html
http://steelrackmanufacturers.com/Storage-Rack.html
http://steelrackmanufacturers.com/Steel-Rack.html
http://steelrackmanufacturers.com/mobile-rack-manufacturers-chennai-tamilnadu-india.html
http://steelrackmanufacturers.com/RacK.html
http://steelrackmanufacturers.com/garment-display-rack-manufacturers-chennai-tamilnadu-india.html
http://steelrackmanufacturers.com/mobile-racking-system-manufacturers-chennai-tamilnadu-india.html
http://steelrackmanufacturers.com/Supermarket-Rack.html
http://steelrackmanufacturers.com/two-tier-racks.html
http://steelrackmanufacturers.com/retail-display-racks.html
http://steelrackmanufacturers.com/pallet-racking-system.html
https://mezzanineflooringinchennai.blogspot.com/
https://storagerackmanufacturersinchennai.blogspot.com/
https://steelrackmanufacturersinchennai.blogspot.com/
https://rackmanufacturersinchennai.blogspot.com/
https://supermarketrackschennai.blogspot.com/
https://retaildisplayrackschennai.blogspot.com/
https://departmentalstoragerackchennai.blogspot.com/
https://rackingsystemchennai.blogspot.com/
https://heavydutyrackchennai.blogspot.com/
https://g.page/steelrackmanufacturers?share
http://steelrackmanufacturers.com/Mezzanine-Flooring.html
http://steelrackmanufacturers.com/Mezzanine-Floor-Construction.html
http://steelrackmanufacturers.com/Blog-mezzanine-flooring-manufacturers.html
http://steelrackmanufacturers.com/Mezzanine-Flooring-System.html
Construction Site Report
This construction site visit report summarizes a visit by students to the D'Latour construction site in Bandar Sunway, Selangor, Malaysia. The report describes the objectives of the visit which were to experience the construction site environment, understand safety procedures, visualize building materials and processes, and gain knowledge of machinery uses. Key observations from the site include the building foundations consisting of micropiles, use of post-tensioning and scaffolding, storage of materials, and different formwork types including timber, table, and steel forms. Photos document various construction elements, equipment, and the group visiting the site.
Curtain walls
The document presents information about curtain walls, including what they are, their history, components, construction systems, implications for designers, examples on campus, and concerns. Curtain walls are non-load bearing exterior walls attached to but not part of the structural frame of a building. They minimize air and water infiltration and were first used in the Hallidie Building in 1918. Their components include anchors, mullions, and vision glass. Common construction systems are stick, unit panel, unit mullion, and point-loaded structural glazing. Designers must consider factors like thermal performance and safety.
What's hot (20)
08-Working details-ceiling-Knauf metal profiles_brochure
08-Working details-ceiling-Knauf metal profiles_brochure
BUILDING TECHNOLOGY 2: Project 2- Working Drawing- Construction Drawing
BUILDING TECHNOLOGY 2: Project 2- Working Drawing- Construction Drawing
Mezzanine floor system in Chennai|Vijayawada|Nellore|Mumbai|Pune|Delhi|Tric...
Mezzanine floor system in Chennai|Vijayawada|Nellore|Mumbai|Pune|Delhi|Tric...
J. Gregg 100875103 - Parapet Detail 7 TYPICAL FLASHING DETAIL @ PARAPET
- 1. PREFIN. METAL FLASHING CAP TO MATCH MS2 COLOUR MODIFIED CAP SHEET EXT. GRADE SHEATING BOARD WOOD BLOCKING WITH R10 INSULATION INFILLEXTEND 2 MODIFIED CAP SHEET TO SIDING PREFIN. METAL FLASHING W. DRIP EDGE TO MATCH MS2 COLOUR. PREFIN. BLACK METAL CLOSURE PIECE AT MITERED SIDING 5% SLOPE MS2 R1b EXTEND 2 MODIFIED CAP SHEET TO SIDING PREFIN. METAL FLASHING EDGE TO MATCH MS2 COLOUR. EXTEND CONT. SECOND CAP SHEET 300mm FROM PARAPET CANT STRIP 300 75 ANCHOR BOLT AT BASE AND SILL FOR SHEAR LOAD RESISTANCE SHEET NUMBER TITLE ISSUE CHART GREGG BUILDING CONSULTANTS PROJECT Approved Checked Drawn Job Number Sheet Information 4/7/20154:22:23PMF:GB6.BLDG3013-DetailingModule11Module11ParapetDetail7.rvt S-007 TYPICAL FLASHING DETAIL @ PARAPET GBC HEALTH SCIENCES BUILDING TORONTO, ON 51 DOCKSIDE DRIVE TORONTO, ON GEORGE BROWN COLLEGE S. MANN J. GREGG DETAIL 7 1 : 10 TYPICAL FLASHING DETAIL @ PARAPET 1 3D AXO VIEW - PARAPET DETAIL 2 MARK ISSUE DATE 1 2 3 5 6 7 9 8 10 4 LEGEND 1. R30 SEMI-RIGID INSULATION TYPE 4 (INS-4) 2. GAL STEEL SIDING MOUNTED VERTICALLY. 3. METAL FLASHING CAP. 4. WOOD BLOCK FRAMING FILLED WITH MIN. R20 BATT. INSUL. 5. RAINSCREEN MEMB. WRAPPED ABOVE SHATHING AND BLOCKING. 6. 200mm CONC. FLOOR SLAB. 7. COMPOSITE DECK AS PART OF ROOF TYPE R1b. REFER TO STRUCTURAL 8. 150mm COLD FORMED STEEL FRAMING 400 mm O.C. 9. W610X153 WIDE FLANGE STEEL BEAM. REFER TO STRUCTURAL 10. GALV. STEEL L CHANNEL MOUNTED TO INTERIOR EDGE OF W BEAM