iot UNIT-II (9).pdf
•
0 likes•12 views
This document discusses topics related to Internet of Things (IoT) including integrating sensors and actuators with Arduino, implementing IoT with Raspberry Pi, software defined networking, cloud computing, sensor-cloud, fog computing, smart cities, smart homes, connected vehicles, smart grid, and case studies in agriculture, healthcare, and activity monitoring. It also mentions robotics behavior levels 1 through 4.
Report
Share
Report
Share
Download to read offline
Recommended
IRJET- Implementation of Cloud Robotics using Raspberry PI to Monitor Product...
This document describes the implementation of a cloud robot using a Raspberry Pi to monitor production in an industrial environment. A Raspberry Pi controller is used to control devices like sensors, a camera, and DC motors attached to a robot. The robot's movement and sensors are controlled remotely using ROS from an Android device. Sensor data and camera footage are sent to the Raspberry Pi and stored in the cloud. The cloud robot allows remote monitoring of industrial processes and conditions to improve safety and efficiency.
Architecture and scope of Internet of things (IoT)
In this presentation clearly mention about the IoT and its functioning and graph for the scope of IoT.
Actionable Insights from Multi-sensor IoT Systems using the OGC SensorThings ...
Actionable Insights from Multi-sensor IoT Systems using the OGC SensorThings API - Sensors are Better When They Are Together - delivered at the OGC Location Powers event in Singapore.
I articulate the importance of building IoT system of systems, and why AI / Analytics can perform significantly better on interoperable IoT in comparison to silo'd IoT systems.
Iot
This document discusses the Internet of Things (IoT). It begins with an introduction and overview of IoT elements and layers. It then discusses the key drivers and applications of IoT, as well as challenges. IoT connects physical objects through sensors and allows them to communicate over the internet. It has applications across various sectors like smart homes, cities, manufacturing and enterprises. However, realizing its full potential faces challenges related to sensing, connectivity, power, security and complexity of development.
iot module 1 ppt (3).pdf
This document discusses Internet of Things (IoT) networking. It explains that IoT involves the convergence of multiple domains like sensing, communication, cloud computing and data analytics. The key components of an IoT network are devices, communication networks and the cloud. Communication standards and gateway devices enable interconnection and information exchange between various IoT devices and the cloud. Some challenges in IoT networking include security, scalability, energy efficiency and interoperability due to the large numbers and variety of connected devices. Careful consideration is needed in choice of network architecture and communication technologies to address the diverse needs of different IoT applications.
iot module 1 ppt.pptx
This document discusses Internet of Things (IoT) applications and networking. It covers:
1) The definition and history of IoT, how it connects devices to the internet using wireless technologies, and projections of over 20 billion connected "things" in the future.
2) Key components of an IoT system including sensing, actuation, networking, communication protocols, and machine-to-machine communications.
3) Challenges of IoT including security, scalability, energy efficiency, and data analytics.
Internet of Things
Internet of Things has been identified as one of the emerging technologies in IT.
Within 2020 the number of things connected to the Internet will be about 50 billion.
Unit I.pptx
The document discusses the key aspects of an IoT (Internet of Things) course syllabus. It covers topics like introducing IoT characteristics, physical and logical design, domain applications, programming Raspberry Pi and Arduino for IoT development, and an introduction to robotics. Specific topics include defining IoT, communication models, home automation, smart cities, programming LEDs and sensors using Raspberry Pi and Arduino, and identifying robotic components. The objectives are to explain IoT characteristics, design, communication models, identify domain applications, and develop IoT applications using Raspberry Pi and Arduino.
Recommended
IRJET- Implementation of Cloud Robotics using Raspberry PI to Monitor Product...
This document describes the implementation of a cloud robot using a Raspberry Pi to monitor production in an industrial environment. A Raspberry Pi controller is used to control devices like sensors, a camera, and DC motors attached to a robot. The robot's movement and sensors are controlled remotely using ROS from an Android device. Sensor data and camera footage are sent to the Raspberry Pi and stored in the cloud. The cloud robot allows remote monitoring of industrial processes and conditions to improve safety and efficiency.
Architecture and scope of Internet of things (IoT)
In this presentation clearly mention about the IoT and its functioning and graph for the scope of IoT.
Actionable Insights from Multi-sensor IoT Systems using the OGC SensorThings ...
Actionable Insights from Multi-sensor IoT Systems using the OGC SensorThings API - Sensors are Better When They Are Together - delivered at the OGC Location Powers event in Singapore.
I articulate the importance of building IoT system of systems, and why AI / Analytics can perform significantly better on interoperable IoT in comparison to silo'd IoT systems.
Iot
This document discusses the Internet of Things (IoT). It begins with an introduction and overview of IoT elements and layers. It then discusses the key drivers and applications of IoT, as well as challenges. IoT connects physical objects through sensors and allows them to communicate over the internet. It has applications across various sectors like smart homes, cities, manufacturing and enterprises. However, realizing its full potential faces challenges related to sensing, connectivity, power, security and complexity of development.
iot module 1 ppt (3).pdf
This document discusses Internet of Things (IoT) networking. It explains that IoT involves the convergence of multiple domains like sensing, communication, cloud computing and data analytics. The key components of an IoT network are devices, communication networks and the cloud. Communication standards and gateway devices enable interconnection and information exchange between various IoT devices and the cloud. Some challenges in IoT networking include security, scalability, energy efficiency and interoperability due to the large numbers and variety of connected devices. Careful consideration is needed in choice of network architecture and communication technologies to address the diverse needs of different IoT applications.
iot module 1 ppt.pptx
This document discusses Internet of Things (IoT) applications and networking. It covers:
1) The definition and history of IoT, how it connects devices to the internet using wireless technologies, and projections of over 20 billion connected "things" in the future.
2) Key components of an IoT system including sensing, actuation, networking, communication protocols, and machine-to-machine communications.
3) Challenges of IoT including security, scalability, energy efficiency, and data analytics.
Internet of Things
Internet of Things has been identified as one of the emerging technologies in IT.
Within 2020 the number of things connected to the Internet will be about 50 billion.
Unit I.pptx
The document discusses the key aspects of an IoT (Internet of Things) course syllabus. It covers topics like introducing IoT characteristics, physical and logical design, domain applications, programming Raspberry Pi and Arduino for IoT development, and an introduction to robotics. Specific topics include defining IoT, communication models, home automation, smart cities, programming LEDs and sensors using Raspberry Pi and Arduino, and identifying robotic components. The objectives are to explain IoT characteristics, design, communication models, identify domain applications, and develop IoT applications using Raspberry Pi and Arduino.
Smart Cities, IoT, SDN, 5G Networks, Cloud Computing… Managing Complexity wit...
Service & Content Providers’ Perspective of Smart Cities -How to enrich citizen experience using a pervasive urban SDN connectivity environment, Ramon Casellas
B.E-ECE-FT-R 2021-Curriculum and Syllabus-2.pdf
This document outlines an Internet of Things course for electronics. The course aims to impart knowledge about IoT, including its value chain structure, application areas, and technologies. Students will learn about IoT sensors and technological challenges, market forecasts, and how to prepare projects using Raspberry Pi. The course objectives are to explain IoT concepts, sensors, design technological sensors and applications, and advanced IoT topics. The syllabus covers introduction to IoT, IoT and M2M, cloud offerings, development examples, and preparing sensor and actuator projects with Raspberry Pi.
Project Document
The document describes a connected mailbox prototype that uses sensors and cloud technology to provide instant mail notification. Sensors attached to mailboxes detect when mail is delivered and send the data to a Raspberry Pi. The Pi then sends the sensor data to the IBM Cloud using MQTT protocol. If motion is detected, notifications are sent via email and text message to recipients. The system aims to make the mailing process smarter and more efficient by eliminating delays in notification.
IRJET- Plug and Play Approach: Sensors to Cloud Communication
This document discusses a plug and play approach for sensors to communicate with the cloud via IoT gateways and cloud APIs. It first defines plug and play and describes how IoT gateways can translate between different sensor protocols and facilitate communication with the cloud. It then discusses how cloud APIs provide standardized interfaces that allow IoT gateways to connect heterogeneous sensors to clouds in a plug and play manner without additional programming. Specifically, cloud APIs for IoT gateways consist of sensor, rule, and communication engines that handle data extraction from sensors, processing rules, and transmitting data to clouds through various wired and wireless connections. This plug and play approach via IoT gateways and cloud APIs provides an effective way to access sensor data from clouds.
Introduction to Internet of Things (IoT)
The document provides an introduction to the Internet of Things (IoT). It discusses the history and growth of IoT, including forecasts of 20-50 billion connected devices by 2020. Key enabling technologies for IoT are described, such as sensors, actuators, embedded systems, connectivity standards, and cloud computing. Example applications of IoT are highlighted in areas like smart cities, homes, cars, and industrial settings. However, security and privacy challenges are also noted as areas that must be addressed for IoT to reach its full potential.
2014 IoT_Forum_NXP
Topic: 'Connected Consumers' and the Smart City
Speaker: Andrew C. Russell, Vice President, Greater China Regional Marketing, NXP Semiconductors
Code for Birmingham - Citizen IoT Project
This document proposes a citizen-owned smart city platform called SmarterBham. A diverse team will create an open-source IoT platform and governance model to collect real-time city sensor data. Starting with a small pilot of sensors measuring light, noise, air quality and temperature, the goal is to empower citizens to shape their city and improve quality of life. The roadmap outlines workshops in 2018 to build prototypes, with a public launch planned for late 2018 after completing the governance model.
Tactical Virtual Assistance (TVA) With Jubal Biggs | Current 2022
Causing Pain:
The traditional edge intelligence computing model doesn’t work for edge Military wearable and IOBT devices. Transmission of large amounts of sensor data over potentially unreliable communications channels puts Battlefield soldiers at risk.
Problem Statement: How DOD can manage the military battlefield assets to include integrate signals from a diverse and dynamic set of sensors, including static ground sensors and soldiers worn sensors to provide predictive and operational analytics?
SAIC’s Virtual Tactical Assistance provides the DOD the IOT infrastructure to manage military battlefield assets to include integrating signals and communications protocols from a diverse and dynamic set of sensors, including stat ground sensors and soldier worn sensors to provide Distributed compute resources and predictive and operational analytics. Combatant personnel require the ability to use data from many systems and communicate peer to peer without access to significant IT infrastructure. The technology seeks to enhance asset management, supply and maintenance operations, rapid target acquisition, and the sharing of targeting/ballistic solutions. Sensors and other weapon mountable accessories/enablers are designed to capture logistic, targeting, and telemetry data from individual weapon systems and share it across the squad, platoon, and higher echelons via a decentralized network. Confluent/Kafka provides processing of IOBT data streams, such as device and sensor data, which provides insights into asset state by monitoring use, providing indicators, tracking patterns and optimizing asset use for proactive and predictive analytics. More importantly, Confluent kafka provides each TVA to function as a data hub and a peer in a “data mesh”, which can share messages, location updates, and other data with other TVA devices in an ad-hoc manner independent of any wider network.
IOT ajay binay.pdf
The document provides an overview of Internet of Things (IoT) concepts including definitions, characteristics, physical and logical design of IoT systems, enabling technologies, communication models and protocols. It discusses domain-specific IoT applications, IoT platforms design methodology, physical IoT devices, and emerging technologies related to IoT like big data, industry 4.0, RFID and mobile app development tools.
Iot
The document provides an overview of Internet of Things (IoT) concepts including definitions, characteristics, physical and logical design of IoT systems, enabling technologies, communication models and protocols. It discusses domain-specific IoT applications, IoT platforms design methodology, physical IoT devices, and emerging technologies related to IoT like big data, industry 4.0, RFID and mobile app development tools.
IRJET - Interaction Paradigm of IoT using Augmented Reality
This document discusses using augmented reality to improve human interaction with internet of things devices. The goal is to combine augmented reality's ability to overlay digital information on the physical world with internet of things technology. This would allow users to see an augmented reality interface for IoT devices by pointing their smartphone camera at them, rather than having to navigate separate device interfaces. It could also digitally connect inputs and outputs of different IoT devices through these augmented reality overlays. The document outlines the hardware and software tools needed to implement this approach, including the Unity game engine, Vuforia augmented reality SDK, Arduino microcontrollers, and ESP8266 WiFi modules. Flowcharts show how input and output devices would work within the system.
Sensors, IoT and Aged Care: A Practical Guide
A presentation on sensor and IoT technology within the Aged Care market, covering a range of topics including innovation, security and concerns.
IoT
This document provides an overview of Internet of Things (IoT) concepts including what IoT is, sample IoT devices, difference between microcontrollers and microprocessors, popular IoT hardware platforms, categories of IoT, connectivity approaches, protocols, frameworks, tools and cloud platforms. Key topics covered include common IoT devices, how IoT systems connect devices to apps and the cloud, open source frameworks for device integration, and platforms for ingesting and analyzing IoT data.
Internet of Things (IoT).pptx
The document discusses the Internet of Things (IoT). It defines IoT as a system of interrelated computing devices, mechanical and digital machines, objects, animals or people that are provided with unique identifiers and the ability to transfer data over a network without requiring human interaction. It notes that in IoT, things can be people, animals, vehicles or any object that can be assigned an IP address. The document also outlines the different types of IoT including consumer, commercial, military, industrial and infrastructure IoT. It states that organizations use IoT to operate more efficiently and enhance customer service. The key building blocks of IoT like end devices, gateways, connectivity, applications and programming languages are also mentioned.
Codesign-Oriented Platform for Agile Internet of Things Prototype Development
Codesign-Oriented Platform for Agile Internet of Things Prototype DevelopmentJonathan Ruiz de Garibay
The Internet of Things offers a growing market open to new products. To be able to take advantages of this opportunity companies need to be able to quickly create prototypes of their products. Given the difficulties that the development of embedded devices presents, both on the hardware and software parts, it is a necessity to create tools that ease this process. In this paper we present a codesing-oriented platform that will help developers to create their prototypes in an agile manner. The presented platform simplifies the usage and integration of standardized peripherals and reduces the complexity of the development process. We also present a prototype created using the platform, showcasing its capabilities.IRJET- Wireless Sensor Network Based Internet of things for Environmental...
This document describes a wireless sensor network system using Internet of Things technology for environmental impact analysis. The system uses low-cost sensors and Raspberry Pi, Arduino, and XBee modules to monitor environmental conditions like temperature and humidity from different locations. Sensor data is sent to the Raspberry Pi base station via a ZigBee wireless protocol and stored. The data can be accessed remotely through a web interface to monitor and control the system. The system provides a low-cost way to wirelessly monitor the environment in real-time.
Internet of Things Overview
This presentation gives a high level view of Internet of Things and where it stands today. It also contains a slide on how a Temperature Logger was built out using Arduino, Python and the Google Cloud Platform.
Iot presentation
The Internet of things describes physical objects that are embedded with sensors, processing ability, software, and other technologies that connect and exchange data with other devices and systems over the Internet or other communications networks.
2018.10.slide share
RADIO6ENSE is a Technological Developer focused on innovative solutions for Industry 4.0 and Industrial IoT. We offer High Customized Systems and Devices for manufacturing, testing and maintenance.
Unleashing the Potential of IoT and Android
Embark on a journey into the heart of IoT and Android connectivity with Ficode. Our brand stands at the forefront of technology, breaking barriers and exploring new horizons. "IoT and Android: How These Devices Connect and Communicate (with/without Internet)!" becomes a reality with Ficode's innovative solutions. Immerse yourself in a world where devices seamlessly communicate, enhancing your daily experiences. Whether online or offline, our products ensure uninterrupted connectivity, empowering you to control your environment effortlessly. Embrace the future with Ficode and witness the power of limitless connections. For more detail visit our website: https://www.ficode.co.uk/services/iot-development
More Related Content
Similar to iot UNIT-II (9).pdf
Smart Cities, IoT, SDN, 5G Networks, Cloud Computing… Managing Complexity wit...
Service & Content Providers’ Perspective of Smart Cities -How to enrich citizen experience using a pervasive urban SDN connectivity environment, Ramon Casellas
B.E-ECE-FT-R 2021-Curriculum and Syllabus-2.pdf
This document outlines an Internet of Things course for electronics. The course aims to impart knowledge about IoT, including its value chain structure, application areas, and technologies. Students will learn about IoT sensors and technological challenges, market forecasts, and how to prepare projects using Raspberry Pi. The course objectives are to explain IoT concepts, sensors, design technological sensors and applications, and advanced IoT topics. The syllabus covers introduction to IoT, IoT and M2M, cloud offerings, development examples, and preparing sensor and actuator projects with Raspberry Pi.
Project Document
The document describes a connected mailbox prototype that uses sensors and cloud technology to provide instant mail notification. Sensors attached to mailboxes detect when mail is delivered and send the data to a Raspberry Pi. The Pi then sends the sensor data to the IBM Cloud using MQTT protocol. If motion is detected, notifications are sent via email and text message to recipients. The system aims to make the mailing process smarter and more efficient by eliminating delays in notification.
IRJET- Plug and Play Approach: Sensors to Cloud Communication
This document discusses a plug and play approach for sensors to communicate with the cloud via IoT gateways and cloud APIs. It first defines plug and play and describes how IoT gateways can translate between different sensor protocols and facilitate communication with the cloud. It then discusses how cloud APIs provide standardized interfaces that allow IoT gateways to connect heterogeneous sensors to clouds in a plug and play manner without additional programming. Specifically, cloud APIs for IoT gateways consist of sensor, rule, and communication engines that handle data extraction from sensors, processing rules, and transmitting data to clouds through various wired and wireless connections. This plug and play approach via IoT gateways and cloud APIs provides an effective way to access sensor data from clouds.
Introduction to Internet of Things (IoT)
The document provides an introduction to the Internet of Things (IoT). It discusses the history and growth of IoT, including forecasts of 20-50 billion connected devices by 2020. Key enabling technologies for IoT are described, such as sensors, actuators, embedded systems, connectivity standards, and cloud computing. Example applications of IoT are highlighted in areas like smart cities, homes, cars, and industrial settings. However, security and privacy challenges are also noted as areas that must be addressed for IoT to reach its full potential.
2014 IoT_Forum_NXP
Topic: 'Connected Consumers' and the Smart City
Speaker: Andrew C. Russell, Vice President, Greater China Regional Marketing, NXP Semiconductors
Code for Birmingham - Citizen IoT Project
This document proposes a citizen-owned smart city platform called SmarterBham. A diverse team will create an open-source IoT platform and governance model to collect real-time city sensor data. Starting with a small pilot of sensors measuring light, noise, air quality and temperature, the goal is to empower citizens to shape their city and improve quality of life. The roadmap outlines workshops in 2018 to build prototypes, with a public launch planned for late 2018 after completing the governance model.
Tactical Virtual Assistance (TVA) With Jubal Biggs | Current 2022
Causing Pain:
The traditional edge intelligence computing model doesn’t work for edge Military wearable and IOBT devices. Transmission of large amounts of sensor data over potentially unreliable communications channels puts Battlefield soldiers at risk.
Problem Statement: How DOD can manage the military battlefield assets to include integrate signals from a diverse and dynamic set of sensors, including static ground sensors and soldiers worn sensors to provide predictive and operational analytics?
SAIC’s Virtual Tactical Assistance provides the DOD the IOT infrastructure to manage military battlefield assets to include integrating signals and communications protocols from a diverse and dynamic set of sensors, including stat ground sensors and soldier worn sensors to provide Distributed compute resources and predictive and operational analytics. Combatant personnel require the ability to use data from many systems and communicate peer to peer without access to significant IT infrastructure. The technology seeks to enhance asset management, supply and maintenance operations, rapid target acquisition, and the sharing of targeting/ballistic solutions. Sensors and other weapon mountable accessories/enablers are designed to capture logistic, targeting, and telemetry data from individual weapon systems and share it across the squad, platoon, and higher echelons via a decentralized network. Confluent/Kafka provides processing of IOBT data streams, such as device and sensor data, which provides insights into asset state by monitoring use, providing indicators, tracking patterns and optimizing asset use for proactive and predictive analytics. More importantly, Confluent kafka provides each TVA to function as a data hub and a peer in a “data mesh”, which can share messages, location updates, and other data with other TVA devices in an ad-hoc manner independent of any wider network.
IOT ajay binay.pdf
The document provides an overview of Internet of Things (IoT) concepts including definitions, characteristics, physical and logical design of IoT systems, enabling technologies, communication models and protocols. It discusses domain-specific IoT applications, IoT platforms design methodology, physical IoT devices, and emerging technologies related to IoT like big data, industry 4.0, RFID and mobile app development tools.
Iot
The document provides an overview of Internet of Things (IoT) concepts including definitions, characteristics, physical and logical design of IoT systems, enabling technologies, communication models and protocols. It discusses domain-specific IoT applications, IoT platforms design methodology, physical IoT devices, and emerging technologies related to IoT like big data, industry 4.0, RFID and mobile app development tools.
IRJET - Interaction Paradigm of IoT using Augmented Reality
This document discusses using augmented reality to improve human interaction with internet of things devices. The goal is to combine augmented reality's ability to overlay digital information on the physical world with internet of things technology. This would allow users to see an augmented reality interface for IoT devices by pointing their smartphone camera at them, rather than having to navigate separate device interfaces. It could also digitally connect inputs and outputs of different IoT devices through these augmented reality overlays. The document outlines the hardware and software tools needed to implement this approach, including the Unity game engine, Vuforia augmented reality SDK, Arduino microcontrollers, and ESP8266 WiFi modules. Flowcharts show how input and output devices would work within the system.
Sensors, IoT and Aged Care: A Practical Guide
A presentation on sensor and IoT technology within the Aged Care market, covering a range of topics including innovation, security and concerns.
IoT
This document provides an overview of Internet of Things (IoT) concepts including what IoT is, sample IoT devices, difference between microcontrollers and microprocessors, popular IoT hardware platforms, categories of IoT, connectivity approaches, protocols, frameworks, tools and cloud platforms. Key topics covered include common IoT devices, how IoT systems connect devices to apps and the cloud, open source frameworks for device integration, and platforms for ingesting and analyzing IoT data.
Internet of Things (IoT).pptx
The document discusses the Internet of Things (IoT). It defines IoT as a system of interrelated computing devices, mechanical and digital machines, objects, animals or people that are provided with unique identifiers and the ability to transfer data over a network without requiring human interaction. It notes that in IoT, things can be people, animals, vehicles or any object that can be assigned an IP address. The document also outlines the different types of IoT including consumer, commercial, military, industrial and infrastructure IoT. It states that organizations use IoT to operate more efficiently and enhance customer service. The key building blocks of IoT like end devices, gateways, connectivity, applications and programming languages are also mentioned.
Codesign-Oriented Platform for Agile Internet of Things Prototype Development
Codesign-Oriented Platform for Agile Internet of Things Prototype DevelopmentJonathan Ruiz de Garibay
The Internet of Things offers a growing market open to new products. To be able to take advantages of this opportunity companies need to be able to quickly create prototypes of their products. Given the difficulties that the development of embedded devices presents, both on the hardware and software parts, it is a necessity to create tools that ease this process. In this paper we present a codesing-oriented platform that will help developers to create their prototypes in an agile manner. The presented platform simplifies the usage and integration of standardized peripherals and reduces the complexity of the development process. We also present a prototype created using the platform, showcasing its capabilities.IRJET- Wireless Sensor Network Based Internet of things for Environmental...
This document describes a wireless sensor network system using Internet of Things technology for environmental impact analysis. The system uses low-cost sensors and Raspberry Pi, Arduino, and XBee modules to monitor environmental conditions like temperature and humidity from different locations. Sensor data is sent to the Raspberry Pi base station via a ZigBee wireless protocol and stored. The data can be accessed remotely through a web interface to monitor and control the system. The system provides a low-cost way to wirelessly monitor the environment in real-time.
Internet of Things Overview
This presentation gives a high level view of Internet of Things and where it stands today. It also contains a slide on how a Temperature Logger was built out using Arduino, Python and the Google Cloud Platform.
Iot presentation
The Internet of things describes physical objects that are embedded with sensors, processing ability, software, and other technologies that connect and exchange data with other devices and systems over the Internet or other communications networks.
2018.10.slide share
RADIO6ENSE is a Technological Developer focused on innovative solutions for Industry 4.0 and Industrial IoT. We offer High Customized Systems and Devices for manufacturing, testing and maintenance.
Unleashing the Potential of IoT and Android
Embark on a journey into the heart of IoT and Android connectivity with Ficode. Our brand stands at the forefront of technology, breaking barriers and exploring new horizons. "IoT and Android: How These Devices Connect and Communicate (with/without Internet)!" becomes a reality with Ficode's innovative solutions. Immerse yourself in a world where devices seamlessly communicate, enhancing your daily experiences. Whether online or offline, our products ensure uninterrupted connectivity, empowering you to control your environment effortlessly. Embrace the future with Ficode and witness the power of limitless connections. For more detail visit our website: https://www.ficode.co.uk/services/iot-development
Similar to iot UNIT-II (9).pdf (20)
Smart Cities, IoT, SDN, 5G Networks, Cloud Computing… Managing Complexity wit...
Smart Cities, IoT, SDN, 5G Networks, Cloud Computing… Managing Complexity wit...
IRJET- Plug and Play Approach: Sensors to Cloud Communication
IRJET- Plug and Play Approach: Sensors to Cloud Communication
Tactical Virtual Assistance (TVA) With Jubal Biggs | Current 2022
Tactical Virtual Assistance (TVA) With Jubal Biggs | Current 2022
IRJET - Interaction Paradigm of IoT using Augmented Reality
IRJET - Interaction Paradigm of IoT using Augmented Reality
Codesign-Oriented Platform for Agile Internet of Things Prototype Development
Codesign-Oriented Platform for Agile Internet of Things Prototype Development
IRJET- Wireless Sensor Network Based Internet of things for Environmental...
IRJET- Wireless Sensor Network Based Internet of things for Environmental...
Recently uploaded
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
Recently uploaded (20)
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
An improved modulation technique suitable for a three level flying capacitor ...
An improved modulation technique suitable for a three level flying capacitor ...
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
iot UNIT-II (9).pdf
- 1. UNIT-II Introduction to Arduino Programming: Integration of Sensors and Actuators with Arduino. Introduction to Raspberry Pi: Implementation of IoT with Raspberry Pi. Introduction to SDN: SDN for IoT, Data Handling and Analytics, Cloud Computing, Sensor-Cloud, Fog Computing, Smart Cities and Smart Homes, Connected Vehicles, Smart Grid, Industrial IoT, Case Study: Agriculture, Healthcare, Activity Monitoring. RBT Levels: L1, L2, L3,L4.
- 27. Integration of Sensors and Actuators with Arduino
- 34. Integration of Actuators with Arduino
- 41. Introduction to Raspberry Pi Implementation of IoT with Raspberry Pi.
- 56. Client and server interface
- 60. SOFTWARE DEFINED NETWORKING PART
- 77. CLOUD COMPUTING
- 90. SENSOR-CLOUD
- 98. Dynamic And Adaptive Data Caching Mechanisms
- 101. Dynamic Optional Pricing For Sensor Cloud Infrastructure
- 103. FOG COMPUTING
- 117. SMART CITIES AND SMART HOMES
- 121. Connected Vehicles
- 128. Smart Grid