Infrared Plastic Solar Cell - EEERulez.BlogSpot.in
•Download as PPT, PDF•
13 likes•11,839 views
Nanotechnology is the nexus of sciences. It includes anything smaller than 100 nanometers with novel properties. The advent of solar energy just about solved all the problems. The conventional solar cells that are used to harness solar energy are less efficient and cannot function properly on a cloudy day. The use of nanotechnology in the solar cells created an opportunity to overcome this problem , thereby increasing the efficiency. This paper deals with an offshoot in the advancement of nanotechnology and its advantage over commercial solar cell.
Report
Share
Report
Share
Recommended
INFRARED PLASTIC SOLAR CELLS
Nanotechnology is the nexus of sciences.
It includes anything smaller than 100 nanometers with novel properties.
The conventional solar cells that are used to harness solar energy are less efficient and cannot function properly on a cloudy day.
The use of nanotechnology in the solar cells created an opportunity to overcome this problem , thereby increasing the efficiency.
Infrared Plastic Solar Cell
Konark Institute of Science and Technology discusses infrared plastic solar cells. The cells use nanotechnology and quantum dots combined with a polymer to harness infrared rays from sunlight for energy, making them potentially 5 times more efficient than conventional solar cells. The plastic solar cells are also flexible, lightweight and compact, allowing them to be painted on surfaces like cars to recharge batteries. While initial costs are high, the technology could eventually provide a clean renewable energy source for portable electronics.
Infrared plastic solar cell- tamilyoungsters.com -2nd PPT
Infrared plastic solar cells have three main advantages over conventional solar cells: 1) They can harness infrared rays and generate electricity even on cloudy days, whereas conventional solar cells only use 35% of the sun's energy; 2) They are more compact and flexible than bulky solar panels; 3) Initial tests show they may be 30% more efficient. The plastic solar cells consist of cadmium selenide nanorods dispersed in a polymer that acts as a conductor, sandwiched between electrodes. When light hits the nanorods, electrons are released to generate current and flow to the electrodes. This overcomes disadvantages of conventional solar cells.
infrared plastic solar cell
This document summarizes a seminar on infrared plastic solar cells. It discusses how plastic solar cells use nanotechnology to harness infrared radiation from the sun through semiconductor nanorods, allowing them to generate electricity even on cloudy days. This overcomes limitations of conventional solar panels. While plastic cells are more efficient, a current limitation is their higher cost compared to traditional panels. The seminar covers solar energy basics, nanotechnology applications, infrared radiation properties, types of solar cells, and advantages of plastic cells for harnessing more of the sun's energy spectrum.
seminar report on solar cell
The document is a seminar report on solar cells submitted in partial fulfillment for a Bachelor of Technology degree in Electrical Engineering. It discusses the basic components and manufacturing process of solar cells over 10 sections. The report provides an overview of what solar cells are, the history and generations of solar cell technology, how solar cells work on a crystalline silicon level, and the 7-step manufacturing process involving silicon purification, wafer preparation, doping, screen printing, stringing, anti-reflective coating, and module manufacturing. It also covers applications, efficiency, costs, materials used, and when not to install PV systems.
Infrared plastic solar cell -- tamil youngsters.com
The document discusses how nanotechnology has been used to develop new solar cells that are more efficient than conventional solar cells. It explains that nanotechnology solar cells use nanorods and quantum dots combined with a polymer material to detect infrared radiation from the sun and produce electricity, even on cloudy days. These plastic solar cells represent a breakthrough as they can harness invisible infrared rays and are considered 30% more efficient than traditional solar cells. The nanotechnology allows them to be compact and flexible, with potential to be a consistent green energy source.
plastic solaar cell
This document summarizes a seminar presentation on plastic solar cells. It begins with an introduction to plastic solar cells, which were first introduced in 1986 and use conducting plastics and flexible substrates. It then describes conventional solar cells made from semiconductors, which have high efficiency but are expensive to produce. The working principle of a basic p-n junction solar cell is explained. The document then discusses the device architectures, working principles, advantages and drawbacks of plastic solar cells, which use organic semiconductors and conjugated polymers. It concludes by stating that while plastic solar cells are more compact and effective than conventional cells, their current high cost is a major drawback that may be solved in the future.
Presentation on solar cell
Solar cells directly convert sunlight into electricity through the photovoltaic effect in semiconductor materials like silicon, with solar panels consisting of multiple interconnected solar cells to produce a usable amount of power. The document discusses the basic physics of how silicon is doped to create either holes or electrons that form pairs when struck by photons, as well as explaining the components and operation of single solar cells and larger solar panels.
Recommended
INFRARED PLASTIC SOLAR CELLS
Nanotechnology is the nexus of sciences.
It includes anything smaller than 100 nanometers with novel properties.
The conventional solar cells that are used to harness solar energy are less efficient and cannot function properly on a cloudy day.
The use of nanotechnology in the solar cells created an opportunity to overcome this problem , thereby increasing the efficiency.
Infrared Plastic Solar Cell
Konark Institute of Science and Technology discusses infrared plastic solar cells. The cells use nanotechnology and quantum dots combined with a polymer to harness infrared rays from sunlight for energy, making them potentially 5 times more efficient than conventional solar cells. The plastic solar cells are also flexible, lightweight and compact, allowing them to be painted on surfaces like cars to recharge batteries. While initial costs are high, the technology could eventually provide a clean renewable energy source for portable electronics.
Infrared plastic solar cell- tamilyoungsters.com -2nd PPT
Infrared plastic solar cells have three main advantages over conventional solar cells: 1) They can harness infrared rays and generate electricity even on cloudy days, whereas conventional solar cells only use 35% of the sun's energy; 2) They are more compact and flexible than bulky solar panels; 3) Initial tests show they may be 30% more efficient. The plastic solar cells consist of cadmium selenide nanorods dispersed in a polymer that acts as a conductor, sandwiched between electrodes. When light hits the nanorods, electrons are released to generate current and flow to the electrodes. This overcomes disadvantages of conventional solar cells.
infrared plastic solar cell
This document summarizes a seminar on infrared plastic solar cells. It discusses how plastic solar cells use nanotechnology to harness infrared radiation from the sun through semiconductor nanorods, allowing them to generate electricity even on cloudy days. This overcomes limitations of conventional solar panels. While plastic cells are more efficient, a current limitation is their higher cost compared to traditional panels. The seminar covers solar energy basics, nanotechnology applications, infrared radiation properties, types of solar cells, and advantages of plastic cells for harnessing more of the sun's energy spectrum.
seminar report on solar cell
The document is a seminar report on solar cells submitted in partial fulfillment for a Bachelor of Technology degree in Electrical Engineering. It discusses the basic components and manufacturing process of solar cells over 10 sections. The report provides an overview of what solar cells are, the history and generations of solar cell technology, how solar cells work on a crystalline silicon level, and the 7-step manufacturing process involving silicon purification, wafer preparation, doping, screen printing, stringing, anti-reflective coating, and module manufacturing. It also covers applications, efficiency, costs, materials used, and when not to install PV systems.
Infrared plastic solar cell -- tamil youngsters.com
The document discusses how nanotechnology has been used to develop new solar cells that are more efficient than conventional solar cells. It explains that nanotechnology solar cells use nanorods and quantum dots combined with a polymer material to detect infrared radiation from the sun and produce electricity, even on cloudy days. These plastic solar cells represent a breakthrough as they can harness invisible infrared rays and are considered 30% more efficient than traditional solar cells. The nanotechnology allows them to be compact and flexible, with potential to be a consistent green energy source.
plastic solaar cell
This document summarizes a seminar presentation on plastic solar cells. It begins with an introduction to plastic solar cells, which were first introduced in 1986 and use conducting plastics and flexible substrates. It then describes conventional solar cells made from semiconductors, which have high efficiency but are expensive to produce. The working principle of a basic p-n junction solar cell is explained. The document then discusses the device architectures, working principles, advantages and drawbacks of plastic solar cells, which use organic semiconductors and conjugated polymers. It concludes by stating that while plastic solar cells are more compact and effective than conventional cells, their current high cost is a major drawback that may be solved in the future.
Presentation on solar cell
Solar cells directly convert sunlight into electricity through the photovoltaic effect in semiconductor materials like silicon, with solar panels consisting of multiple interconnected solar cells to produce a usable amount of power. The document discusses the basic physics of how silicon is doped to create either holes or electrons that form pairs when struck by photons, as well as explaining the components and operation of single solar cells and larger solar panels.
Long Flashover Arresters - EEERulez.BlogSpot.in
A new simple, effective and inexpensive method for lightning protection of medium voltage overhead distribution line is using long flashover arresters (LFA).
The important feature of this modular long flashover arrester (LFA-M) is that it can be applied for lightning protection of overhead distribution line against both induced overvoltage and direct lightning strokes
Solar panel Technology ppt
The document discusses solar energy and solar panels. It begins by defining solar energy as energy originating from thermonuclear fusion reactions in the sun. It then discusses how solar energy can be used to generate electricity through thermal solar or photovoltaic methods. The remainder of the document focuses on photovoltaics, explaining how solar panels work to convert sunlight into electricity using photovoltaic cells. It describes the components and manufacturing of different types of solar panels, including monocrystalline, polycrystalline, and thin film technologies. It concludes by outlining the specifications that characterize solar panels.
Presentation on solar cell
This document provides an overview of solar cell technology. It discusses the history of solar cells from their development in 1954 at Bell Laboratories to their use in satellites. It describes how solar cells work, converting sunlight into electricity using the photoelectric effect in semiconductor materials like silicon. The document outlines the benefits of solar cells as well as their applications and disadvantages.
TPMS Vehicle Safety Standard
In response to a mandate in the Transportation Recall Enhancement, Accountability, and Documentation (TREAD) Act of 2000, this agency is issuing a two-part final rule.
The first part is contained in this document. It establishes a new Federal Motor
Vehicle Safety Standard that requires the installation of tire pressure monitoring systems (TPMSs) that warn the driver when a tire is significantly under-inflated. The standard applies to passenger cars, trucks, multipurpose passenger vehicles, and buses with a gross vehicle weight rating of 10,000 pounds or less, except those vehicles with dual wheels on an axle.
This document establishes two compliances for the short term, for the period between November 1, 2003, and October 31, 2006. Under the first compliance option, a vehicle's TPMS must warn the driver when the pressure in any single tire or in each tire in any combination of tires, up to a total of four tires, has fallen to 25 percent or more below the vehicle manufacturer's recommended cold inflation pressure for the tires, or a minimum level of pressure specified in the standard, whichever pressure is higher. Under the second compliance option, a vehicle's TPMS must warn the driver when the pressure in any single tire has fallen to 30 percent or more below the vehicle manufacturer's recommended cold inflation pressure for the tires, or a minimum level of pressure specified in the standard, whichever pressure is higher. Compliance with the options would be phased in during that period by increasing percentages of production.
Learn more at www.TIROGAGE.com
TPMS, Tire pressure moniter system
During our driving journey, the tire burst always happens, when you install our TPMS, it can remind you any abnormality.
WHAT IS TPMS & HOW DOES IT WORK
The tyre pressure monitoring system (TPMS) warns drivers when tyre pressure is low through a yellow indicator light. There are two main types of TPMS: indirect and direct. Indirect TPMS uses wheel speed sensors to detect differences in rotation that may indicate low pressure, while direct TPMS has sensors inside each tyre that directly measure and wirelessly transmit pressure readings. Both aim to prevent accidents that may occur from underinflated tyres, though direct TPMS is more accurate while indirect TPMS is less expensive. Proper tyre maintenance is still important, as TPMS is not a replacement for manual pressure checks.
Tire Pressure Monitoring System (TPMS) - An Introduction
The document provides an introduction to tire pressure monitoring systems (TPMS). It discusses why TPMS are important for safety and fuel economy reasons. It describes the requirements for TPMS according to US and European legislation. It then explains the three main types of TPMS - indirect, direct, and hybrid systems. Indirect systems use wheel speed sensors to detect pressure differences while direct systems have sensors on each wheel transmitting pressure readings. Hybrid systems combine aspects of both.
Zno tio2 coreshell- independent study- HUST
The document provides an overview of an independent study on synthesizing ZnO-TiO2 core-shell nanostructures via hydrothermal method. The student chose this topic because ZnO and TiO2 are efficient photocatalysts but have poor solar energy absorption. The study aims to develop a new photocatalyst by growing ZnO nanorods on a substrate, depositing TiO2 shells via hydrothermal method, and characterizing the material. Analysis methods include XRD, SEM, and UV-visible spectroscopy. The results and discussion sections analyze the material properties and structure.
Google home
Este documento describe la aplicación Google Home, la cual permite configurar y controlar dispositivos Chromecast, Chromecast Audio y Google Home. Explica que se necesita tener uno de estos dispositivos y conexión a Internet para usar la aplicación. Luego detalla las funciones principales de la aplicación como reproducir contenido, cambiar la configuración de los dispositivos y descubrir nuevas aplicaciones y funciones compatibles con cada dispositivo. Finalmente, brinda instrucciones básicas sobre cómo encontrar y controlar los dispositivos conectados a través de la aplicación.
PV Hybrid System with DSTATCOM for Residential Applications
Now a days PV based energy systems are playing a
vital role among all the renewable energy sourcesin our day
to day life.Proper control should be required to meet the exact
load conditions such that it should satisfy the non-linear
nature of both the solar irradiance and load. In this paper, a
battery is also incorporated along with the PV system to meet
the necessary drop due to change in weather conditions. Here,
a proper control is achieved by using DSTATCOM to
compensate the reactive power. This paper proposes an
advanced technique of PWM to generate the gating pulses
and applied to a Cascaded H-Bridge multilevel inverter to
improve the voltage quality. Here, the entire system is designed
to meet the load of Mogulthur (W.G.Dt. Andhra Pradesh).
Simulation results are presented through Matlab/Simulink
by taking different cases into consideration.
Light Emitting Polymer- By M.S.Koushik
This presentation is about the next Gen display technology Light emitting polymer. It overcomes the disadvantages of LCD's and LED's and take you to to the next level of enjoying this technology.
Improvement of Power System Reliability - EEERulez.BlogSpot.in
Geographically speaking, power systems are probably the largest interconnected networks in service today and offer interesting engineering challenges.
Generating sites are far away from big load demand regions.
Some power plants are close to natural resources, while others are in areas with fewer e1nvironmental restrictions.
Because of this generation/load separation, a reliable power transmission network is necessary.
Right-of-way restrictions limit transmission line construction.
In general, almost nobody wants to live close to a power plant or a transmission line.
This limited network growth requires optimization of available resources.
Google home - Social media campaign - Pierre-clement Lihou
Social Media Campaign for the Google Home product. Focusing on Facebook, YouTube, Twitter and Google store.
Equal Split Wilkinson Power Divider - Project Report
This document describes the design of an equal split Wilkinson power divider with the following specifications: frequency of 2.4 GHz, source and load impedances of 50 ohms, substrate permittivity of 3.38, substrate thickness of 1.524 mm, and conductor thickness of 0.15 mm. It provides background on Wilkinson power dividers, describes the calculation of microstrip line widths and lengths, shows the simulated circuit schematic and layout, and plots the resulting S-parameters which achieve the desired 3 dB power split with good port matching and isolation as expected.
Organic solar cell
The document discusses organic semiconductors and their operation in organic solar cells. It describes how organic materials can act as conductors when their molecular structure forms alternating single and double bonds. The source of free electrons in these materials is pi bonds between carbon atoms. When light is absorbed in the materials, excitons are formed which are electron-hole pairs. At the interface between an organic donor material and an organic acceptor material in a solar cell, the excitons can dissociate into free charge carriers. However, the charges remain bound as polarons which need to be separated by an external voltage before being transported to the electrodes.
Wireless Networking
The document provides an overview of wireless networks, including:
1. Wireless networks interconnect systems capable of providing mobile service within a geographic region without physical cables.
2. Components include base stations, mobile switching centers, and public telephone networks. Wireless networks offer mobility, lower installation costs, and flexibility over wired networks but have lower speeds and security.
3. Basic components are wireless network interface cards, access points, and hardware like antennas. Wireless modes include ad-hoc peer-to-peer and infrastructure with access points. Security methods are SSIDs, MAC filtering, and encryption.
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.More Related Content
Viewers also liked
Long Flashover Arresters - EEERulez.BlogSpot.in
A new simple, effective and inexpensive method for lightning protection of medium voltage overhead distribution line is using long flashover arresters (LFA).
The important feature of this modular long flashover arrester (LFA-M) is that it can be applied for lightning protection of overhead distribution line against both induced overvoltage and direct lightning strokes
Solar panel Technology ppt
The document discusses solar energy and solar panels. It begins by defining solar energy as energy originating from thermonuclear fusion reactions in the sun. It then discusses how solar energy can be used to generate electricity through thermal solar or photovoltaic methods. The remainder of the document focuses on photovoltaics, explaining how solar panels work to convert sunlight into electricity using photovoltaic cells. It describes the components and manufacturing of different types of solar panels, including monocrystalline, polycrystalline, and thin film technologies. It concludes by outlining the specifications that characterize solar panels.
Presentation on solar cell
This document provides an overview of solar cell technology. It discusses the history of solar cells from their development in 1954 at Bell Laboratories to their use in satellites. It describes how solar cells work, converting sunlight into electricity using the photoelectric effect in semiconductor materials like silicon. The document outlines the benefits of solar cells as well as their applications and disadvantages.
TPMS Vehicle Safety Standard
In response to a mandate in the Transportation Recall Enhancement, Accountability, and Documentation (TREAD) Act of 2000, this agency is issuing a two-part final rule.
The first part is contained in this document. It establishes a new Federal Motor
Vehicle Safety Standard that requires the installation of tire pressure monitoring systems (TPMSs) that warn the driver when a tire is significantly under-inflated. The standard applies to passenger cars, trucks, multipurpose passenger vehicles, and buses with a gross vehicle weight rating of 10,000 pounds or less, except those vehicles with dual wheels on an axle.
This document establishes two compliances for the short term, for the period between November 1, 2003, and October 31, 2006. Under the first compliance option, a vehicle's TPMS must warn the driver when the pressure in any single tire or in each tire in any combination of tires, up to a total of four tires, has fallen to 25 percent or more below the vehicle manufacturer's recommended cold inflation pressure for the tires, or a minimum level of pressure specified in the standard, whichever pressure is higher. Under the second compliance option, a vehicle's TPMS must warn the driver when the pressure in any single tire has fallen to 30 percent or more below the vehicle manufacturer's recommended cold inflation pressure for the tires, or a minimum level of pressure specified in the standard, whichever pressure is higher. Compliance with the options would be phased in during that period by increasing percentages of production.
Learn more at www.TIROGAGE.com
TPMS, Tire pressure moniter system
During our driving journey, the tire burst always happens, when you install our TPMS, it can remind you any abnormality.
WHAT IS TPMS & HOW DOES IT WORK
The tyre pressure monitoring system (TPMS) warns drivers when tyre pressure is low through a yellow indicator light. There are two main types of TPMS: indirect and direct. Indirect TPMS uses wheel speed sensors to detect differences in rotation that may indicate low pressure, while direct TPMS has sensors inside each tyre that directly measure and wirelessly transmit pressure readings. Both aim to prevent accidents that may occur from underinflated tyres, though direct TPMS is more accurate while indirect TPMS is less expensive. Proper tyre maintenance is still important, as TPMS is not a replacement for manual pressure checks.
Tire Pressure Monitoring System (TPMS) - An Introduction
The document provides an introduction to tire pressure monitoring systems (TPMS). It discusses why TPMS are important for safety and fuel economy reasons. It describes the requirements for TPMS according to US and European legislation. It then explains the three main types of TPMS - indirect, direct, and hybrid systems. Indirect systems use wheel speed sensors to detect pressure differences while direct systems have sensors on each wheel transmitting pressure readings. Hybrid systems combine aspects of both.
Zno tio2 coreshell- independent study- HUST
The document provides an overview of an independent study on synthesizing ZnO-TiO2 core-shell nanostructures via hydrothermal method. The student chose this topic because ZnO and TiO2 are efficient photocatalysts but have poor solar energy absorption. The study aims to develop a new photocatalyst by growing ZnO nanorods on a substrate, depositing TiO2 shells via hydrothermal method, and characterizing the material. Analysis methods include XRD, SEM, and UV-visible spectroscopy. The results and discussion sections analyze the material properties and structure.
Google home
Este documento describe la aplicación Google Home, la cual permite configurar y controlar dispositivos Chromecast, Chromecast Audio y Google Home. Explica que se necesita tener uno de estos dispositivos y conexión a Internet para usar la aplicación. Luego detalla las funciones principales de la aplicación como reproducir contenido, cambiar la configuración de los dispositivos y descubrir nuevas aplicaciones y funciones compatibles con cada dispositivo. Finalmente, brinda instrucciones básicas sobre cómo encontrar y controlar los dispositivos conectados a través de la aplicación.
PV Hybrid System with DSTATCOM for Residential Applications
Now a days PV based energy systems are playing a
vital role among all the renewable energy sourcesin our day
to day life.Proper control should be required to meet the exact
load conditions such that it should satisfy the non-linear
nature of both the solar irradiance and load. In this paper, a
battery is also incorporated along with the PV system to meet
the necessary drop due to change in weather conditions. Here,
a proper control is achieved by using DSTATCOM to
compensate the reactive power. This paper proposes an
advanced technique of PWM to generate the gating pulses
and applied to a Cascaded H-Bridge multilevel inverter to
improve the voltage quality. Here, the entire system is designed
to meet the load of Mogulthur (W.G.Dt. Andhra Pradesh).
Simulation results are presented through Matlab/Simulink
by taking different cases into consideration.
Light Emitting Polymer- By M.S.Koushik
This presentation is about the next Gen display technology Light emitting polymer. It overcomes the disadvantages of LCD's and LED's and take you to to the next level of enjoying this technology.
Improvement of Power System Reliability - EEERulez.BlogSpot.in
Geographically speaking, power systems are probably the largest interconnected networks in service today and offer interesting engineering challenges.
Generating sites are far away from big load demand regions.
Some power plants are close to natural resources, while others are in areas with fewer e1nvironmental restrictions.
Because of this generation/load separation, a reliable power transmission network is necessary.
Right-of-way restrictions limit transmission line construction.
In general, almost nobody wants to live close to a power plant or a transmission line.
This limited network growth requires optimization of available resources.
Google home - Social media campaign - Pierre-clement Lihou
Social Media Campaign for the Google Home product. Focusing on Facebook, YouTube, Twitter and Google store.
Equal Split Wilkinson Power Divider - Project Report
This document describes the design of an equal split Wilkinson power divider with the following specifications: frequency of 2.4 GHz, source and load impedances of 50 ohms, substrate permittivity of 3.38, substrate thickness of 1.524 mm, and conductor thickness of 0.15 mm. It provides background on Wilkinson power dividers, describes the calculation of microstrip line widths and lengths, shows the simulated circuit schematic and layout, and plots the resulting S-parameters which achieve the desired 3 dB power split with good port matching and isolation as expected.
Organic solar cell
The document discusses organic semiconductors and their operation in organic solar cells. It describes how organic materials can act as conductors when their molecular structure forms alternating single and double bonds. The source of free electrons in these materials is pi bonds between carbon atoms. When light is absorbed in the materials, excitons are formed which are electron-hole pairs. At the interface between an organic donor material and an organic acceptor material in a solar cell, the excitons can dissociate into free charge carriers. However, the charges remain bound as polarons which need to be separated by an external voltage before being transported to the electrodes.
Wireless Networking
The document provides an overview of wireless networks, including:
1. Wireless networks interconnect systems capable of providing mobile service within a geographic region without physical cables.
2. Components include base stations, mobile switching centers, and public telephone networks. Wireless networks offer mobility, lower installation costs, and flexibility over wired networks but have lower speeds and security.
3. Basic components are wireless network interface cards, access points, and hardware like antennas. Wireless modes include ad-hoc peer-to-peer and infrastructure with access points. Security methods are SSIDs, MAC filtering, and encryption.
Viewers also liked (17)
Tire Pressure Monitoring System (TPMS) - An Introduction
Tire Pressure Monitoring System (TPMS) - An Introduction
PV Hybrid System with DSTATCOM for Residential Applications
PV Hybrid System with DSTATCOM for Residential Applications
Improvement of Power System Reliability - EEERulez.BlogSpot.in
Improvement of Power System Reliability - EEERulez.BlogSpot.in
Google home - Social media campaign - Pierre-clement Lihou
Google home - Social media campaign - Pierre-clement Lihou
Equal Split Wilkinson Power Divider - Project Report
Equal Split Wilkinson Power Divider - Project Report
Recently uploaded
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdPengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...Nguyen Thanh Tu Collection
https://app.box.com/s/qhtvq32h4ybf9t49ku85x0n3xl4jhr15Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Recently uploaded (20)
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx