This document describes the IAS-2000C automated card print quality analysis system. It allows for quantitative and objective measurement of print quality attributes on cards, rather than subjective evaluation. Key features include automated or interactive operation for research or production use, analysis of color, sharpness, defects and other attributes according to standards. It provides repeatable, reliable results critical for quality control and process improvement in card manufacturing.
If you are preparing to retire within the
next five years, you have some important
decisions to make — and one of the most
important involves your retirement income
strategy
Using Social Media In The Patient Centered Medical HomeMike Sevilla
Using Social Media in the Patient Centered Medical Home by Mike Sevilla, MD. Presented at Maine Quality Counts Learning Session on Friday, June 20, 2014 in Augusta, Maine. More information at DrMikeSevilla.com. Also check out MaineQualityCounts.Org
La geografía radical o marxista surgió en la década de 1970 como una reacción de la izquierda contra el cuantitativismo promovido en países capitalistas. Abogaba por una geografía comprometida con la sociedad que denunciara las omisiones de las posturas positivistas y se enfocara en problemas sociales y soluciones a injusticias. En la década de 1980, gracias a geógrafos como Yves Lacoste, Milton Santos y David Harvey, este enfoque crítico ganó relevancia al proponer que el espacio es una
This document describes the IAS-2000C automated card print quality analysis system. It allows for quantitative and objective measurement of print quality attributes on cards, rather than subjective evaluation. Key features include automated or interactive operation for research or production use, analysis of color, sharpness, defects and other attributes according to standards. It provides repeatable, reliable results critical for quality control and process improvement in card manufacturing.
If you are preparing to retire within the
next five years, you have some important
decisions to make — and one of the most
important involves your retirement income
strategy
Using Social Media In The Patient Centered Medical HomeMike Sevilla
Using Social Media in the Patient Centered Medical Home by Mike Sevilla, MD. Presented at Maine Quality Counts Learning Session on Friday, June 20, 2014 in Augusta, Maine. More information at DrMikeSevilla.com. Also check out MaineQualityCounts.Org
La geografía radical o marxista surgió en la década de 1970 como una reacción de la izquierda contra el cuantitativismo promovido en países capitalistas. Abogaba por una geografía comprometida con la sociedad que denunciara las omisiones de las posturas positivistas y se enfocara en problemas sociales y soluciones a injusticias. En la década de 1980, gracias a geógrafos como Yves Lacoste, Milton Santos y David Harvey, este enfoque crítico ganó relevancia al proponer que el espacio es una
SpatialAnalyzer is a fully traceable metrology software platform that allows you to perform complex fit/transformations to CAD/Part and saves you money, time, scrap, and helps you ensure that your parts or assembly perform to design specifications
CarePACS is diagnostic workstation software intended for hospitals, imaging centers, and tele-radiology practices seeking to supplement or replace their current viewing solution. It offers high performance and easy-to-use clinical functionality at an affordable price. The software provides DICOM viewing, image processing tools, communication features for transferring images, and tools for online collaboration between radiologists.
Synapse Workstation Software provides viewing and manipulation of radiological data as a multi-modality, thin-client application accessible via a web browser. It offers tools for image display, processing, annotation, and measurement. Reading protocols automate the display layout and image sequencing for studies and comparisons. Customizable work folders are populated based on patient data.
The document summarizes the key features of OMCS International's PMO2000TM Reliability Assurance Software Suite. It allows for reliability centered maintenance, risk analysis, integration with SAP systems, and customizable reporting. The software provides a complete solution for asset reliability from initial analysis through implementation and management.
Learn about going from 3D scans of core samples and other rock types to visualisation, analysis and model generation with Simpleware. Trials available here: http://www.simpleware.com/software/trial/
The document discusses Waveline metrology systems for measuring surface roughness, contour, and topography. It describes their portable, mobile, and stationary systems that can perform automated and manual measurements in production and metrology labs. The systems provide precise measurement data through tactile and optical probes to evaluate surfaces and dimensions in manufacturing.
This document summarizes the GRC software CheckAud for Data Analysis. It provides an intuitive interface that allows users to easily construct analyses using drag and drop. Analyses can be saved as analysis trees and shared with colleagues. The software executes projects and displays results. It distinguishes itself from other analysis tools by requiring less user knowledge and training time, including audit security features like an audit log, and being portable. The software aims to make data analysis more effective and efficient for auditing.
FlexoIAS-II is a second-generation test instrument designed for quality monitoring in flexographic printing. FlexoIAS-II brings a sophisticated tool to the shop floor, enabling quick, objective, reliable quality analysis of flexographic photopolymer plates, films and masks.
The Innovative Video Vision Machine DPS200-Video is a powerful and easy-to-use video vision machine for producing fully dimensioned drawings of measured parts within minutes. It features video edge detection to capture hundreds of data points instantly, profile scanning to automatically trace undefined parts, and SPC analysis including control charts. Dimensioned part views show in/out of tolerance dimensions in green/red.
This document contains summaries of 14 software projects developed by LV Tailoring Software for the semiconductor and medical industries. The software projects include modifications to robotic arm cleaning systems, advanced matching for CDSEM metrology, remote CDSEM control centers, log file analyzers for various tools, and systems for fast creation of new product classes for metrology tools.
The document describes the OmniScan MX2 phased array flaw detector from Olympus. The MX2 offers improvements over the previous MX model including a brighter, larger touchscreen, faster setup and testing speeds, more data storage capacity, and new analysis software. It is a modular and customizable instrument that can accommodate current and future phased array technologies to meet a user's evolving needs.
The document describes the PV650C pack handling unit, an all-in-one solution for printing and verification of folded cartons in pharmaceutical production. It features a continuous belt conveyor system for accurate transport of cartons, and is controlled by the HSAJET print and verification software to allow printing, inspection, and ejection of cartons from a single interface. The system provides a turnkey solution for compliant printing and traceability of cartons.
PLV Systems Inc. has introduced a new digital optical comparator system called DOC for measuring extruded rubber profiles. DOC uses scanners to capture high-quality images of cut profile samples and overlays CAD files to identify variances from specifications. It provides measurement and visualization capabilities in an easy-to-use, stand-up workstation. DOC's images and data can be distributed to managers and engineers for production analysis. The system aims to help manufacturers easily measure critical features, understand production needs, and improve quality processes.
Hướng dẫn sử dụng máy quét mã vạch datalogic-magellan-3300hsiKua Potter
Máy quét mã vạch Magellan ™ 3300HSi mang đến công nghệ hình ảnh mới của Datalogic với hight volume point-of-sale. Cùng với máy quét mã vạch 3200VSi, chúng là những máy quét mã vạch đầu tiên để nhân đôi tốc độ và field-of-view của máy quét laser hiệu suất cao đa hướng rộng trong khi có thêm các lợi ích gắn liền với hình ảnh. Công nghệ hình ảnh này cung cấp hiệu suất vượt trội để đọc mã vạch có chất lượng không tốt như quá ngắn, out-of-spec, chất lượng in kém và mã số GS1 DataBar ™, và cung cấp hỗ trợ cho cả hai tuyến tính (1D) và nhãn giải mã 2D. Màn hình Magellan 3300HSi cho phép quét và trình bày các kỹ thuật quét đảm bảo năng suất tối đa và dễ dàng làm việc.
Manage Multiple Production Units and lines.
Complete system to generate all barcode stickers, MRP.
Critical part verification system,
Rework Data can be maintained.
The document summarizes testing equipment from Shimadzu, including their new AG-X Precision Universal Tester series. The AG-X series focuses on reliability, easy operation, and convenient support functions. It delivers high-precision measurement performance through patented technologies and innovations. The user-friendly interface and software allow intuitive operation and efficient workflow. A variety of accessories are also available for different testing applications.
The KODAK 800 Print Manager is a digital front end that lets you run your press at peak performance with easy set-up, a sophisticated job queue, early preflight checks and on-the-fly job correction. Our scalable design lets you operate at speed using the minimal hardware required.
VeriFire Tools version 8.00 is a Windows-based programming and test utility for ONYX series fire alarm products that replaces older versions. It features a modern interface, customizable views, project management capabilities, and supports programming, testing, and maintenance of various Notifier devices. Minimum system requirements include Windows 7/8, 1GHz processor, 2GB RAM, serial or USB port, and internet connection.
Why Customizable Imaging Software is Better than a "Jack of All Trades"Olympus IMS
In manufacturing today, many types of image analysis are being performed to meet the different needs of various industries and applications. For this reason, many imaging software and microscope companies have created software that serves as a “jack of all trades,” giving you a variety of tools that seemingly allow you to accomplish just about anything.
The problem with these broad software tools is that there is more than one way to perform many imaging processes, and there can be lots of variability between different operators. Solution-based software, on the other hand, takes a look at very specific customer applications and processes and maps them step-by-step into the software. This creates a much easier to use piece of software with less variation between operators, and allows for more repeatable results in your analysis.
For more information, visit: http://www.olympus-ims.com/en/insight/customizable-imaging-software-better-than-jack-of-all-trades/
The document provides technical specifications for a book scanning system. It can scan books up to 25cm thick and 30kg in weight. The system uses a CCD sensor with 40-200 million pixels and a Rodenstock Rodagon lens. It has a minimum focus depth of 13cm and can scan at resolutions up to 440dpi. The cycle time is 3.24 seconds per scan. Additional features include a motorized book cradle and glass plate, and software for processing scans.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
SpatialAnalyzer is a fully traceable metrology software platform that allows you to perform complex fit/transformations to CAD/Part and saves you money, time, scrap, and helps you ensure that your parts or assembly perform to design specifications
CarePACS is diagnostic workstation software intended for hospitals, imaging centers, and tele-radiology practices seeking to supplement or replace their current viewing solution. It offers high performance and easy-to-use clinical functionality at an affordable price. The software provides DICOM viewing, image processing tools, communication features for transferring images, and tools for online collaboration between radiologists.
Synapse Workstation Software provides viewing and manipulation of radiological data as a multi-modality, thin-client application accessible via a web browser. It offers tools for image display, processing, annotation, and measurement. Reading protocols automate the display layout and image sequencing for studies and comparisons. Customizable work folders are populated based on patient data.
The document summarizes the key features of OMCS International's PMO2000TM Reliability Assurance Software Suite. It allows for reliability centered maintenance, risk analysis, integration with SAP systems, and customizable reporting. The software provides a complete solution for asset reliability from initial analysis through implementation and management.
Learn about going from 3D scans of core samples and other rock types to visualisation, analysis and model generation with Simpleware. Trials available here: http://www.simpleware.com/software/trial/
The document discusses Waveline metrology systems for measuring surface roughness, contour, and topography. It describes their portable, mobile, and stationary systems that can perform automated and manual measurements in production and metrology labs. The systems provide precise measurement data through tactile and optical probes to evaluate surfaces and dimensions in manufacturing.
This document summarizes the GRC software CheckAud for Data Analysis. It provides an intuitive interface that allows users to easily construct analyses using drag and drop. Analyses can be saved as analysis trees and shared with colleagues. The software executes projects and displays results. It distinguishes itself from other analysis tools by requiring less user knowledge and training time, including audit security features like an audit log, and being portable. The software aims to make data analysis more effective and efficient for auditing.
FlexoIAS-II is a second-generation test instrument designed for quality monitoring in flexographic printing. FlexoIAS-II brings a sophisticated tool to the shop floor, enabling quick, objective, reliable quality analysis of flexographic photopolymer plates, films and masks.
The Innovative Video Vision Machine DPS200-Video is a powerful and easy-to-use video vision machine for producing fully dimensioned drawings of measured parts within minutes. It features video edge detection to capture hundreds of data points instantly, profile scanning to automatically trace undefined parts, and SPC analysis including control charts. Dimensioned part views show in/out of tolerance dimensions in green/red.
This document contains summaries of 14 software projects developed by LV Tailoring Software for the semiconductor and medical industries. The software projects include modifications to robotic arm cleaning systems, advanced matching for CDSEM metrology, remote CDSEM control centers, log file analyzers for various tools, and systems for fast creation of new product classes for metrology tools.
The document describes the OmniScan MX2 phased array flaw detector from Olympus. The MX2 offers improvements over the previous MX model including a brighter, larger touchscreen, faster setup and testing speeds, more data storage capacity, and new analysis software. It is a modular and customizable instrument that can accommodate current and future phased array technologies to meet a user's evolving needs.
The document describes the PV650C pack handling unit, an all-in-one solution for printing and verification of folded cartons in pharmaceutical production. It features a continuous belt conveyor system for accurate transport of cartons, and is controlled by the HSAJET print and verification software to allow printing, inspection, and ejection of cartons from a single interface. The system provides a turnkey solution for compliant printing and traceability of cartons.
PLV Systems Inc. has introduced a new digital optical comparator system called DOC for measuring extruded rubber profiles. DOC uses scanners to capture high-quality images of cut profile samples and overlays CAD files to identify variances from specifications. It provides measurement and visualization capabilities in an easy-to-use, stand-up workstation. DOC's images and data can be distributed to managers and engineers for production analysis. The system aims to help manufacturers easily measure critical features, understand production needs, and improve quality processes.
Hướng dẫn sử dụng máy quét mã vạch datalogic-magellan-3300hsiKua Potter
Máy quét mã vạch Magellan ™ 3300HSi mang đến công nghệ hình ảnh mới của Datalogic với hight volume point-of-sale. Cùng với máy quét mã vạch 3200VSi, chúng là những máy quét mã vạch đầu tiên để nhân đôi tốc độ và field-of-view của máy quét laser hiệu suất cao đa hướng rộng trong khi có thêm các lợi ích gắn liền với hình ảnh. Công nghệ hình ảnh này cung cấp hiệu suất vượt trội để đọc mã vạch có chất lượng không tốt như quá ngắn, out-of-spec, chất lượng in kém và mã số GS1 DataBar ™, và cung cấp hỗ trợ cho cả hai tuyến tính (1D) và nhãn giải mã 2D. Màn hình Magellan 3300HSi cho phép quét và trình bày các kỹ thuật quét đảm bảo năng suất tối đa và dễ dàng làm việc.
Manage Multiple Production Units and lines.
Complete system to generate all barcode stickers, MRP.
Critical part verification system,
Rework Data can be maintained.
The document summarizes testing equipment from Shimadzu, including their new AG-X Precision Universal Tester series. The AG-X series focuses on reliability, easy operation, and convenient support functions. It delivers high-precision measurement performance through patented technologies and innovations. The user-friendly interface and software allow intuitive operation and efficient workflow. A variety of accessories are also available for different testing applications.
The KODAK 800 Print Manager is a digital front end that lets you run your press at peak performance with easy set-up, a sophisticated job queue, early preflight checks and on-the-fly job correction. Our scalable design lets you operate at speed using the minimal hardware required.
VeriFire Tools version 8.00 is a Windows-based programming and test utility for ONYX series fire alarm products that replaces older versions. It features a modern interface, customizable views, project management capabilities, and supports programming, testing, and maintenance of various Notifier devices. Minimum system requirements include Windows 7/8, 1GHz processor, 2GB RAM, serial or USB port, and internet connection.
Why Customizable Imaging Software is Better than a "Jack of All Trades"Olympus IMS
In manufacturing today, many types of image analysis are being performed to meet the different needs of various industries and applications. For this reason, many imaging software and microscope companies have created software that serves as a “jack of all trades,” giving you a variety of tools that seemingly allow you to accomplish just about anything.
The problem with these broad software tools is that there is more than one way to perform many imaging processes, and there can be lots of variability between different operators. Solution-based software, on the other hand, takes a look at very specific customer applications and processes and maps them step-by-step into the software. This creates a much easier to use piece of software with less variation between operators, and allows for more repeatable results in your analysis.
For more information, visit: http://www.olympus-ims.com/en/insight/customizable-imaging-software-better-than-jack-of-all-trades/
The document provides technical specifications for a book scanning system. It can scan books up to 25cm thick and 30kg in weight. The system uses a CCD sensor with 40-200 million pixels and a Rodenstock Rodagon lens. It has a minimum focus depth of 13cm and can scan at resolutions up to 440dpi. The cycle time is 3.24 seconds per scan. Additional features include a motorized book cradle and glass plate, and software for processing scans.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...IJECEIAES
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELgerogepatton
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
IAS 2000D
1. The IAS-2000DF, a flat-bed scanner-based
system, is built on QEA’s IASLab® software,
a powerful general-purpose image analysis
platform designed for a broad range of
applications.
The system is used to quantify the image
quality of printed output of all kinds,
typically in a production environment. It
analyzes prints made by any printing
technology.
A comprehensive suite of image analysis
tools, applying ISO standards wherever
appropriate, ensures reliable, repeatable
results.
The IAS-2000DF has two modes of
operation: Interactive (expert) mode for
R&D and test sequence design, and
Automated (operator) mode for optimal
productivity in routine testing.
The image-capturing device is typically a
flat-bed scanner, which can be configured
with or without an automatic document
feeder. (A variant of the system, the IAS-
2000DP, uses a high-speed, high-resolution
production scanner.)
Saved images can also be analyzed. Images
can be in any of a variety of formats
including BMP, JPEG, GIF, TIF, PNG and ICO
(PDF is optional) and from any source,
including digital cameras.
Quality by design.
Do it right the first time.
QEA makes them a reality.
The IAS-2000DF toolkit An array of basic and advanced
tools perform:
dot (blob), line, and area analyses, fundamental to nearly
every print analysis application
tone reproduction (tone reproduction curve, optical density
and Dmax measurements, density consistency and stability)
color analysis (color accuracy, consistency and stability, gray
balance, color gamut)
sharpness and detail (line and dot quality, bleed, dot gain,
text and barcode quality, resolution, modulation transfer,
spatial frequency response)
image noise and print defects (color registration, print
uniformity including banding, streaking, graininess mottle,
wrinkle, missing prints, voids, background, and more)
Flexible design Flexibility is built in:
The IAS-2000DF can be configured for high-speed production
QC or high-res R&D
accommodates new software tools
Interactive or Automated operation Two modes of
operation—Interactive and Automated—make this flexible
system ideal for both R&D applications and for optimal
efficiency and productivity in production environments. Expert
users working in Interactive mode specify test parameters:
regions of interest, analysis settings, results to display on the
monitor, and data to report to a database or text file.
Expert users develop programmed test sequences of any level
of complexity, to be run on any number of samples.
Programmed sequences are typically run in Automated mode
by operators doing routine testing on batches of samples.
Different areas of a test target can be scanned at different
resolutions in the same test sequence, enabling precise analysis
without sacrificing processing efficiency.
Scanner compatibility The IASLab software integrates
smoothly with many different scanners thanks to a TWAIN
device driver.
No more guesswork The IAS-2000DF delivers consistent,
quantitative, operator-independent measurements—quickly,
reliably and repeatably.
Quality Engineering Associates, Inc.
755 Middlesex Turnpike, Unit 3, Billerica, MA 01803 USA
Tel: +1 978-528-2034 Fax: +1 978-528-2033
Email: info@qea.com URL: www.qea.com
Automated Print Quality
Analysis System
IAS-2000DF®
2. Quality Engineering Associates, Inc., 755 Middlesex Turnpike, Unit 3, Billerica, MA 01803, USA
Tel: +1 978-528-2034 Fax: +1 978-528-2033 Email: info@qea.com URL: www.qea.com
SYSTEM COMPONENTS (QEA-SUPPLIED)
IASLab control software
Calibration targets
All necessary cables and connectors
Scanner (high-speed production scanner or flatbed scanner with
or without automatic document feeder)
MINIMUM PC REQUIREMENTS (CUSTOMER-SUPPLIED)
PC running Windows® 7 to 10, 64-bit (with Microsoft Office
Professional® including Excel 2007 and Access 2007,
recommended)
RAM: 8GB or more
CD-ROM drive
Two USB 2.0 ports
ELECTRICAL REQUIREMENTS
110 Vac±10% @ 50/60 Hz or 230 Vac±10% @ 50/60 Hz
OPERATING ENVIRONMENT
Temperature: 10 to 32 C (50 to 90 F)
Relative humidity: 20% to 80% (non-condensing)
DOCUMENTATION
Quick Start Guide
User’s Guide
FUNCTIONS AND FEATURES
Automated or interactive analyses with IASLab®, the IAS-
2000DF’s advanced image quality analysis software platform
Analysis of real-time or saved images in a wide range of image
file formats
Test sequence programming with a graphical user interface
All measurements in calibrated, physical units including spatial
dimensions, reflectance, optical density and color
Numerical results output to database or text file and images to
bitmaps
User-selectable results formats; zoom and color channel display
TWAIN scanner interface for image capture
Single-side or duplex scanning
ANALYSIS TOOLS AND ATTRIBUTES
Dot (blob) and halftone quality analysis (size, shape, x-y
locations, line screen, dot%, and screen angle)
Line, edge, and text quality analysis (line width, blurriness,
raggedness, density, contrast, fill, location, and orientation; line
attributes analyzed per ISO-13660 where applicable)
Solid area attribute measurements (density, reflectance, L*a*b*,
tone reproduction, gradient, graininess, mottle and background;
area attributes analyzed per ISO-13660 where applicable)
Noise Power Spectrum (NPS) and Banding (power spectrum with
Visual Transfer Function filtering)
Spatial Frequency Response (SFR or MTF) using the Slant Edge
method per ISO-12233
Histogram, Profile, Coverage and Background tools available in
the software
Barcode tool for reading information stored in the sample
(available as option)
Point-to-point distance and angle measurements
TYPICAL APPLICATIONS
For prints produced by digital or other printing technologies:
• Research and development
• Process development
• Quality control
• Diagnostics and problem-solving
• Quality management
System Specifications**
** Specifications subject to change without notice. Rev. 160223
IAS-2000DF
®