IADC Certified SAFETY OFFICER Training (Detail)
•
1 like•1,113 views
This document outlines a proposal for a 5-day safety officer training course offered by the Human Assets Training Center in Saudi Arabia. The training will cover various construction and industrial safety topics, including common accidents, protective equipment, safety rules and regulations, chemical safety, lifting equipment, permits, and emergency response. Participants will gain knowledge on safety programs and administering safety effectively through classroom lectures and practical exercises. Upon completing the course with sufficient attendance and exam scores, participants will receive a certification recognized by Saudi authorities.
Report
Share
Report
Share
Download to read offline
Recommended
CV Safety Officer (2016)
Frederick Rowson Bebington has over 50 years of experience in aviation, including glider piloting since 1966 with over 2,200 launches and 500 flight hours. He has held several safety officer roles and is currently the Safety Officer for the Drakensberg Soaring Club. He has extensive training in safety management systems, quality assurance, accident investigation, and aviation security. He has worked as an airline Safety and Quality Assurance manager and currently serves as Manager of Safety and Security for Skywise Airline.
CORP - GRADUATE HSE TRN - AMANA1
This document outlines an agenda for a one-day health and safety management training course with the following key points:
- The course consists of 3 sessions covering health and safety management overview, general safety requirements, and UAE legislation on occupational health and safety.
- Sessions include objectives, content, quizzes, and timing. Content covers topics like accident causation, risk management, PPE, emergency procedures, inspections, and UAE OHS requirements.
- The course runs from 9am to 5pm with lunch and coffee breaks. Attendees will participate in quizzes after each session and receive a certificate upon completion. An attendance list is also included.
Last updated Resume Jan 2017
Mohamed Mohamed Abdel Fatah Ismail is an Egyptian safety engineer with 5 years of experience in the oil and gas industry. He has worked as a Safety Training Coordinator for Weatherford Drilling International in Egypt and as an HSE Engineer for Petro Drilling Service Overseas Company in Egypt. Mohamed holds several safety certifications including NEBOSH, IOSH, OSHA, and IADC Rig PASS. He is also a certified safety trainer through IASP.
1 construction sh
The document discusses occupational safety and health in the construction industry in Malaysia, noting that construction has the highest fatality rate of any industry sector due to hazards such as falls, equipment crashes, and electrocution. It examines the causes of accidents, responsibilities of stakeholders, risk assessment process, types of personal protective equipment and their limitations, and the role of organizations like DOSH and NIOSH in promoting occupational safety and health.
Summer training report
The document is a summer training report submitted by Indranil Banerjee, a 3rd year civil engineering student at Aliah University. It summarizes Indranil's 1 month summer training from June 1-30, 2017 at the Godrej Prakriti Phase-III housing project site run by Simplex Infrastructures Limited in Sodepur, Kolkata. The report covers various topics learned during the training, including safety practices, the role of the store department, plant and machinery used, and provides an overview of the housing project.
Diploma in industrial safety UNIT - 5
This document discusses safety in industrial settings. It covers several topics related to safety including accident history, causes of accidents, costs of accidents, and safety organization. Accidents can result from human error, mechanical failure, or acts of nature. They cause injuries, deaths, equipment damage, and loss of productivity. Establishing a strong safety culture and organization is important to reduce accidents, lower costs, and improve employee health and morale.
Introduction 1
The document describes an inspection conducted on 12/4/2016 of MMHE West yard, the largest fabrication yard in Malaysia, which found that while most health and safety systems were in good condition, there were five critical hazards identified - including risks from machinery, noise exposure, chemical storage, heat exposure, and lack of PPE - that required immediate corrective action from management to ensure compliance with relevant laws.
Developing Accident Avoidance Program for Occupational Safety and Health
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Recommended
CV Safety Officer (2016)
Frederick Rowson Bebington has over 50 years of experience in aviation, including glider piloting since 1966 with over 2,200 launches and 500 flight hours. He has held several safety officer roles and is currently the Safety Officer for the Drakensberg Soaring Club. He has extensive training in safety management systems, quality assurance, accident investigation, and aviation security. He has worked as an airline Safety and Quality Assurance manager and currently serves as Manager of Safety and Security for Skywise Airline.
CORP - GRADUATE HSE TRN - AMANA1
This document outlines an agenda for a one-day health and safety management training course with the following key points:
- The course consists of 3 sessions covering health and safety management overview, general safety requirements, and UAE legislation on occupational health and safety.
- Sessions include objectives, content, quizzes, and timing. Content covers topics like accident causation, risk management, PPE, emergency procedures, inspections, and UAE OHS requirements.
- The course runs from 9am to 5pm with lunch and coffee breaks. Attendees will participate in quizzes after each session and receive a certificate upon completion. An attendance list is also included.
Last updated Resume Jan 2017
Mohamed Mohamed Abdel Fatah Ismail is an Egyptian safety engineer with 5 years of experience in the oil and gas industry. He has worked as a Safety Training Coordinator for Weatherford Drilling International in Egypt and as an HSE Engineer for Petro Drilling Service Overseas Company in Egypt. Mohamed holds several safety certifications including NEBOSH, IOSH, OSHA, and IADC Rig PASS. He is also a certified safety trainer through IASP.
1 construction sh
The document discusses occupational safety and health in the construction industry in Malaysia, noting that construction has the highest fatality rate of any industry sector due to hazards such as falls, equipment crashes, and electrocution. It examines the causes of accidents, responsibilities of stakeholders, risk assessment process, types of personal protective equipment and their limitations, and the role of organizations like DOSH and NIOSH in promoting occupational safety and health.
Summer training report
The document is a summer training report submitted by Indranil Banerjee, a 3rd year civil engineering student at Aliah University. It summarizes Indranil's 1 month summer training from June 1-30, 2017 at the Godrej Prakriti Phase-III housing project site run by Simplex Infrastructures Limited in Sodepur, Kolkata. The report covers various topics learned during the training, including safety practices, the role of the store department, plant and machinery used, and provides an overview of the housing project.
Diploma in industrial safety UNIT - 5
This document discusses safety in industrial settings. It covers several topics related to safety including accident history, causes of accidents, costs of accidents, and safety organization. Accidents can result from human error, mechanical failure, or acts of nature. They cause injuries, deaths, equipment damage, and loss of productivity. Establishing a strong safety culture and organization is important to reduce accidents, lower costs, and improve employee health and morale.
Introduction 1
The document describes an inspection conducted on 12/4/2016 of MMHE West yard, the largest fabrication yard in Malaysia, which found that while most health and safety systems were in good condition, there were five critical hazards identified - including risks from machinery, noise exposure, chemical storage, heat exposure, and lack of PPE - that required immediate corrective action from management to ensure compliance with relevant laws.
Developing Accident Avoidance Program for Occupational Safety and Health
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
CV
Ahmed A. Saleh Mohamed's curriculum vitae provides information about his personal details, qualifications, professional memberships, coursework, work experience, job duties and responsibilities, languages, and computer skills. He holds a B.Sc. in Industrial Engineering and has over 20 years of experience in safety engineering and management roles in the oil and gas industry in Libya. His roles have included safety specialist, senior safety and environment engineer, safety and environment supervisor, and safety and environment coordinator for various companies.
Igc syllabus
This document provides information about the NEBOSH International General Certificate in Occupational Health and Safety, including:
- Key topics covered include international health and safety standards, implementing safety management systems, hazard identification, and risk control.
- The qualification consists of 3 units and takes a minimum of 133 hours of study to complete.
- Successful completion can lead to professional membership with IOSH and IIRSM.
- The qualification is designed for managers and supervisors to develop a broad understanding of health and safety to manage risks.
- Employers benefit from lower costs and liability from effective health and safety practices.
Diploma Industrial Safety - UNIT 4
The document outlines the curriculum for a Diploma in Industrial Safety from the National Safety Academy, covering topics such as chemical safety, confined spaces, electrical safety, firefighting, and construction safety. It provides details on various chemical, electrical, and fire hazards found in industrial settings and measures for their control. Upon completion of the program, students will receive job placement assistance for roles in safety supervision and management.
Updated - Safety Management Systems - Workshop - DGCA SAG Members - As Presented
The slides I used for a workshop on safety management concepts for members of the Indonesian DGCA's State Safety Program Safety Action Groups - specifically the Directorates of Airports and Air Navigation members.
Niosh[1]
The document is a presentation by Mr. Raemy Md. Zein from NIOSH Malaysia on occupational safety and health awareness. It discusses NIOSH's background and role in enhancing OSH in Malaysia through training, consultation, research, and information dissemination. It also outlines key Malaysian OSH legislation including the Factories and Machinery Act 1967 and Occupational Safety and Health Act 1994. The presentation covers employers' and employees' duties and responsibilities under this legislation. It emphasizes risk management approaches including accident investigation and safety inspections.
diploma in industrial safety UNIT-3
This document discusses work procedures related to industrial safety. It covers topics like industrial psychology, employee training, risk analysis, hazards control, emergency planning, and gas cylinder safety. The key points are:
- Employee training is important for developing safety awareness, imparting knowledge and skills to perform work safely, and demonstrating company interest in safety. Different levels of employees require different types and lengths of training.
- Risk analysis involves identifying hazards, assessing risk probabilities and impacts, and allocating risks between project parties. Quantitative risk analysis is required for new projects and periodic reviews of existing operations.
- Emergency plans must be established at both the site level and off-site to quickly respond to incidents, minimize risks to people and
Igc 2 imp qa
This document contains questions and answers related to workplace hazards and controls for the NEBOSH International General Certificate exam. It addresses topics like fire hazards and prevention, mechanical hazards of equipment like pedestal drills, demolition work hazards, exposure limits for solvents, roof repair risks, violence prevention, land maintenance hazards, and respiratory protective equipment. Control measures involve equipment guarding, training, ventilation, chemical storage, emergency procedures, and personal protective gear. Effectiveness of respiratory equipment can be reduced by factors like improper fit testing, lack of training, valve malfunction, and not changing cartridges.
Occupational Health & Safety Precautions Being Insured in Mining Explorations
This document discusses occupational health and safety precautions for mining exploration teams. It outlines the training that exploration teams should receive, including first aid training, vehicle operation training, and personal protective equipment training. It emphasizes the importance of assessing risks, preventing unauthorized access to work sites, and ensuring environmental cleanliness. The document also covers safety measures that should be implemented during the drilling phase of exploration, such as establishing work zones, using protective gear, and holding weekly safety meetings.
A safety audit report on alif garments ltd
The document is a safety audit report on Alif Garments Ltd conducted by Mallik Shaheed Hussain. The summary identifies several non-compliances at the factory including the lack of a sprinkler system, smoke/heat detectors, dedicated employees for emergency response, and proper ventilation. It recommends installing these systems, training employees in emergency response procedures, and conducting regular safety drills to improve safety conditions at the factory.
CV_VISHNU BAIJU_HSE OFFICER
Vishnu Baiju is a safety officer seeking a position in workplace safety and health. He has over 5 years of experience as an HSE safety officer in the UAE. He holds qualifications including NEBOSH IGC certification and certificates in first aid and firefighting. His experience includes conducting safety training, inspections, audits and investigations as well as developing safety plans and procedures. He is proficient in Microsoft Office and safety software and aims to promote a zero accident culture.
Industrial safety
1. The document outlines the key steps in developing and implementing an effective workplace safety program, including establishing a safety policy, analyzing accident causes, implementing procedures, and evaluating effectiveness.
2. It also discusses several major industrial accidents that occurred due to lack of safety, resulting in numerous deaths and injuries of workers.
3. Ensuring safety in factories and for workers is important, as inspections have found many violations of safety norms.
Habashi C.V. 2013
1. The document is a curriculum vitae that outlines the personal and professional experience of Mohamed Habashi Hasan Ali.
2. It details his educational background, work history including 28 years of experience in health, safety, fire, and environmental protection in the oil industry, and computer skills.
3. It also lists the many professional development courses and seminars he has attended related to topics like risk management, crisis management, and environmental protection.
Intorduction to Occupational Safety & Health Management System(OSH-MS)
The document provides an introduction to occupational health and safety management systems (OSH-MS). It discusses what OSH is, why organizations should have an OSH system, and the background and history of the development of international guidelines for OSH management by the International Labour Organization. It also reviews Myanmar's current OSH framework, the ILO conventions it has ratified, and steps it is taking to establish a national OSH framework, including setting up an OSH committee and improving training. The presentation concludes that implementing an OSH management system can significantly reduce work-related accidents and that all countries and organizations should work to improve OSH standards.
Why opt for a working at height program
CN ForkLift Training Center provides training and certification programs. Get forklift license from professional trainers in Ontario.
Industrial safety
This document discusses industrial safety and emergency preparedness. It notes statistics on work-related accidents globally. Common accident types include machinery accidents, falls from heights, and fires/explosions. The document outlines Indian legal requirements regarding factory safety under acts like the Factories Act. Key safety provisions addressed include guarding machinery, prohibiting unsafe work near moving parts, and requirements for hoists, lifts and pressure vessels. The costs of accidents to companies are also discussed. Causes are categorized as direct, indirect and basic. The importance of learning from past accidents and implementing a work permit system to manage hazards is emphasized.
Industrial accidents
Industrial accidents can be caused by unsafe conditions, unsafe acts, or other causes. Unsafe conditions include defective equipment, improper guarding, and inadequate safety devices. Unsafe acts may result from lack of knowledge, unsafe speeds, or removing safety devices. Other causes can include excessive noise, high temperatures, or arrogant supervision. Accidents range from minor to major and can have substantial costs, such as a 2001 fertilizer explosion in France that caused 31 deaths and an estimated €2.5 billion in damages. The costs of industrial accidents include injury/fatality compensation as well as property damage and business interruption losses.
Session 2 General Safety Requirements
The document outlines general safety requirements for a construction site. It covers topics like safety vision and objectives, site rules, personal protective equipment, welfare facilities, reporting incidents, emergency procedures, safety inspections, training, and motivation. It also discusses common workplace hazards like housekeeping, fire, working at heights, electricity, and manual handling and provides solutions to address them. The overall purpose is to establish safety policies and procedures to protect workers' health and safety at the construction site.
30 Hour OSHA Certificate
Chris Irish has completed a 30-Hour Construction Safety course through AdvanceOnline Solutions Online Institute. The course covered topics such as introduction to OSHA, safety hazards, protective equipment, electrical safety, tool safety, excavations, and ergonomics. Irish spent 77 hours and 33 minutes completing the online course and earned 3 continuing education units.
Safety enginnering college
Safety engineers work to ensure safe and hazard-free work environments. They inspect buildings, machines, and new equipment for safety violations and hazards. They also recommend safety features for new processes and products. Safety engineers evaluate plans for new equipment to ensure safe operation. They investigate accidents to determine causes and prevent recurrences. Some specialize in fire prevention by analyzing building and item designs to best place fire equipment. Others focus on product safety through research to make products safe and recommend design changes for safety.
HSE Management Plan
VIETNAM MACHINERY INSTALLATION CORPORATION
(LILAMA CORPORATION) SITE SAFETY, HEALTH AND
ENVIRONMENT PLAN (For Bidding purpose)
Health and Safety Presentation FINAL
1) The construction industry has one of the highest rates of work-related injuries, though numbers have fallen in recent decades due to improved safety standards. Project managers are legally responsible for ensuring workplace health and safety compliance.
2) A comprehensive health and safety program includes policies, objectives, training, inspections, incident reporting, emergency procedures and medical support. It also requires management and employee participation through joint safety committees.
3) A case study from Singapore described a fatal scaffolding accident caused by permit to work failures, lack of safety equipment and supervision. Proper training, safe equipment, safety programs and inspections could have prevented it.
More Related Content
What's hot
CV
Ahmed A. Saleh Mohamed's curriculum vitae provides information about his personal details, qualifications, professional memberships, coursework, work experience, job duties and responsibilities, languages, and computer skills. He holds a B.Sc. in Industrial Engineering and has over 20 years of experience in safety engineering and management roles in the oil and gas industry in Libya. His roles have included safety specialist, senior safety and environment engineer, safety and environment supervisor, and safety and environment coordinator for various companies.
Igc syllabus
This document provides information about the NEBOSH International General Certificate in Occupational Health and Safety, including:
- Key topics covered include international health and safety standards, implementing safety management systems, hazard identification, and risk control.
- The qualification consists of 3 units and takes a minimum of 133 hours of study to complete.
- Successful completion can lead to professional membership with IOSH and IIRSM.
- The qualification is designed for managers and supervisors to develop a broad understanding of health and safety to manage risks.
- Employers benefit from lower costs and liability from effective health and safety practices.
Diploma Industrial Safety - UNIT 4
The document outlines the curriculum for a Diploma in Industrial Safety from the National Safety Academy, covering topics such as chemical safety, confined spaces, electrical safety, firefighting, and construction safety. It provides details on various chemical, electrical, and fire hazards found in industrial settings and measures for their control. Upon completion of the program, students will receive job placement assistance for roles in safety supervision and management.
Updated - Safety Management Systems - Workshop - DGCA SAG Members - As Presented
The slides I used for a workshop on safety management concepts for members of the Indonesian DGCA's State Safety Program Safety Action Groups - specifically the Directorates of Airports and Air Navigation members.
Niosh[1]
The document is a presentation by Mr. Raemy Md. Zein from NIOSH Malaysia on occupational safety and health awareness. It discusses NIOSH's background and role in enhancing OSH in Malaysia through training, consultation, research, and information dissemination. It also outlines key Malaysian OSH legislation including the Factories and Machinery Act 1967 and Occupational Safety and Health Act 1994. The presentation covers employers' and employees' duties and responsibilities under this legislation. It emphasizes risk management approaches including accident investigation and safety inspections.
diploma in industrial safety UNIT-3
This document discusses work procedures related to industrial safety. It covers topics like industrial psychology, employee training, risk analysis, hazards control, emergency planning, and gas cylinder safety. The key points are:
- Employee training is important for developing safety awareness, imparting knowledge and skills to perform work safely, and demonstrating company interest in safety. Different levels of employees require different types and lengths of training.
- Risk analysis involves identifying hazards, assessing risk probabilities and impacts, and allocating risks between project parties. Quantitative risk analysis is required for new projects and periodic reviews of existing operations.
- Emergency plans must be established at both the site level and off-site to quickly respond to incidents, minimize risks to people and
Igc 2 imp qa
This document contains questions and answers related to workplace hazards and controls for the NEBOSH International General Certificate exam. It addresses topics like fire hazards and prevention, mechanical hazards of equipment like pedestal drills, demolition work hazards, exposure limits for solvents, roof repair risks, violence prevention, land maintenance hazards, and respiratory protective equipment. Control measures involve equipment guarding, training, ventilation, chemical storage, emergency procedures, and personal protective gear. Effectiveness of respiratory equipment can be reduced by factors like improper fit testing, lack of training, valve malfunction, and not changing cartridges.
Occupational Health & Safety Precautions Being Insured in Mining Explorations
This document discusses occupational health and safety precautions for mining exploration teams. It outlines the training that exploration teams should receive, including first aid training, vehicle operation training, and personal protective equipment training. It emphasizes the importance of assessing risks, preventing unauthorized access to work sites, and ensuring environmental cleanliness. The document also covers safety measures that should be implemented during the drilling phase of exploration, such as establishing work zones, using protective gear, and holding weekly safety meetings.
A safety audit report on alif garments ltd
The document is a safety audit report on Alif Garments Ltd conducted by Mallik Shaheed Hussain. The summary identifies several non-compliances at the factory including the lack of a sprinkler system, smoke/heat detectors, dedicated employees for emergency response, and proper ventilation. It recommends installing these systems, training employees in emergency response procedures, and conducting regular safety drills to improve safety conditions at the factory.
CV_VISHNU BAIJU_HSE OFFICER
Vishnu Baiju is a safety officer seeking a position in workplace safety and health. He has over 5 years of experience as an HSE safety officer in the UAE. He holds qualifications including NEBOSH IGC certification and certificates in first aid and firefighting. His experience includes conducting safety training, inspections, audits and investigations as well as developing safety plans and procedures. He is proficient in Microsoft Office and safety software and aims to promote a zero accident culture.
Industrial safety
1. The document outlines the key steps in developing and implementing an effective workplace safety program, including establishing a safety policy, analyzing accident causes, implementing procedures, and evaluating effectiveness.
2. It also discusses several major industrial accidents that occurred due to lack of safety, resulting in numerous deaths and injuries of workers.
3. Ensuring safety in factories and for workers is important, as inspections have found many violations of safety norms.
Habashi C.V. 2013
1. The document is a curriculum vitae that outlines the personal and professional experience of Mohamed Habashi Hasan Ali.
2. It details his educational background, work history including 28 years of experience in health, safety, fire, and environmental protection in the oil industry, and computer skills.
3. It also lists the many professional development courses and seminars he has attended related to topics like risk management, crisis management, and environmental protection.
Intorduction to Occupational Safety & Health Management System(OSH-MS)
The document provides an introduction to occupational health and safety management systems (OSH-MS). It discusses what OSH is, why organizations should have an OSH system, and the background and history of the development of international guidelines for OSH management by the International Labour Organization. It also reviews Myanmar's current OSH framework, the ILO conventions it has ratified, and steps it is taking to establish a national OSH framework, including setting up an OSH committee and improving training. The presentation concludes that implementing an OSH management system can significantly reduce work-related accidents and that all countries and organizations should work to improve OSH standards.
Why opt for a working at height program
CN ForkLift Training Center provides training and certification programs. Get forklift license from professional trainers in Ontario.
Industrial safety
This document discusses industrial safety and emergency preparedness. It notes statistics on work-related accidents globally. Common accident types include machinery accidents, falls from heights, and fires/explosions. The document outlines Indian legal requirements regarding factory safety under acts like the Factories Act. Key safety provisions addressed include guarding machinery, prohibiting unsafe work near moving parts, and requirements for hoists, lifts and pressure vessels. The costs of accidents to companies are also discussed. Causes are categorized as direct, indirect and basic. The importance of learning from past accidents and implementing a work permit system to manage hazards is emphasized.
Industrial accidents
Industrial accidents can be caused by unsafe conditions, unsafe acts, or other causes. Unsafe conditions include defective equipment, improper guarding, and inadequate safety devices. Unsafe acts may result from lack of knowledge, unsafe speeds, or removing safety devices. Other causes can include excessive noise, high temperatures, or arrogant supervision. Accidents range from minor to major and can have substantial costs, such as a 2001 fertilizer explosion in France that caused 31 deaths and an estimated €2.5 billion in damages. The costs of industrial accidents include injury/fatality compensation as well as property damage and business interruption losses.
Session 2 General Safety Requirements
The document outlines general safety requirements for a construction site. It covers topics like safety vision and objectives, site rules, personal protective equipment, welfare facilities, reporting incidents, emergency procedures, safety inspections, training, and motivation. It also discusses common workplace hazards like housekeeping, fire, working at heights, electricity, and manual handling and provides solutions to address them. The overall purpose is to establish safety policies and procedures to protect workers' health and safety at the construction site.
30 Hour OSHA Certificate
Chris Irish has completed a 30-Hour Construction Safety course through AdvanceOnline Solutions Online Institute. The course covered topics such as introduction to OSHA, safety hazards, protective equipment, electrical safety, tool safety, excavations, and ergonomics. Irish spent 77 hours and 33 minutes completing the online course and earned 3 continuing education units.
Safety enginnering college
Safety engineers work to ensure safe and hazard-free work environments. They inspect buildings, machines, and new equipment for safety violations and hazards. They also recommend safety features for new processes and products. Safety engineers evaluate plans for new equipment to ensure safe operation. They investigate accidents to determine causes and prevent recurrences. Some specialize in fire prevention by analyzing building and item designs to best place fire equipment. Others focus on product safety through research to make products safe and recommend design changes for safety.
What's hot (19)
Updated - Safety Management Systems - Workshop - DGCA SAG Members - As Presented
Updated - Safety Management Systems - Workshop - DGCA SAG Members - As Presented
Occupational Health & Safety Precautions Being Insured in Mining Explorations
Occupational Health & Safety Precautions Being Insured in Mining Explorations
Intorduction to Occupational Safety & Health Management System(OSH-MS)
Intorduction to Occupational Safety & Health Management System(OSH-MS)
Similar to IADC Certified SAFETY OFFICER Training (Detail)
HSE Management Plan
VIETNAM MACHINERY INSTALLATION CORPORATION
(LILAMA CORPORATION) SITE SAFETY, HEALTH AND
ENVIRONMENT PLAN (For Bidding purpose)
Health and Safety Presentation FINAL
1) The construction industry has one of the highest rates of work-related injuries, though numbers have fallen in recent decades due to improved safety standards. Project managers are legally responsible for ensuring workplace health and safety compliance.
2) A comprehensive health and safety program includes policies, objectives, training, inspections, incident reporting, emergency procedures and medical support. It also requires management and employee participation through joint safety committees.
3) A case study from Singapore described a fatal scaffolding accident caused by permit to work failures, lack of safety equipment and supervision. Proper training, safe equipment, safety programs and inspections could have prevented it.
BATD189
This document provides information about a NEBOSH Certificate in Oil and Gas Operational Safety training course taking place from August 22-27, 2016 in Accra, Ghana. The course is accredited by NEBOSH and will cover key topics in operational safety for the oil and gas industries. Patrick Casken from Armada OSH will lead the course. The training will take place over 6 days and include sessions on hazards, risk management, process safety management, hydrocarbon safety, fire protection and emergency response. Participants will be assessed through a written exam on the final day. The document also outlines the course objectives, structure, learning outcomes and terms and conditions.
BATD 189
This document provides information about a NEBOSH Certificate in Oil and Gas Operational Safety training course taking place from August 22-27, 2016 in Accra, Ghana. The course is accredited by NEBOSH and will cover key topics in operational safety for the oil and gas industries. Patrick Casken from Armada OSH will lead the course. The training will take place over 5 days and include sessions on hazards, risk management, process safety management, hydrocarbon safety, fire protection and emergency response, and logistics and transport operations. Participants will be assessed through a written exam on the final day. The document also provides the course schedule, learning objectives, and terms and conditions.
Abid mahmood --hse
Safe Day Sir,
I introduce myself as a self motivated, hardworking individual having 6 years experience in the field of Health, Safety & Environmental with standard of ISO 9001 ISO 14001 and OSHAS 18001.
Review of my credentials will confirm that I have served as a catalyst for Occupational Health and Safety in the Petro chemical and construction industry, with complete accountability complemented by over 5 years of experience.
Recently I was associated with SAMSUNG ENGINEERING (EPC) (With knowledge of EHSMS) as HSE/Safety supervisor My goal is to transit my enthusiasm, creativity & experience into a position, where I continue to provide the strategic/ tactical leadership critical to retaining valued customers of an organization.
I am certain that my presence in your team will prove to be beneficial to your organization. As such, I would welcome an opportunity to speak with you to evaluate your needs & share my ideas.
My detailed resume is enclosed for your kind reference.
Hopefully the detail in my CV, glimpse of my personal and professional background will serve as the foundation to a longer standing relationship.
I appreciate your consideration and look forward to hearing from you.
ABID MAHMOOD
HSE/ Engineer-Officer
+971552587710
+971504213588
Rsec safety training
This document outlines a safety training program for RSEC Pvt. Ltd. It discusses the importance of health and safety training, including ensuring employees work safely without injury, developing a safety culture, and meeting legal duties. The training program covers general safety topics like safety philosophy and accident prevention, as well as specific topics like confined spaces, gas and electrical safety, material handling safety, and construction safety. Contact information is provided for RSEC Pvt. Ltd. to participate in the training.
Ashraf C v.doc2
This document is a curriculum vitae for Ashraf Abdallah Mohamed EL-Fakharany. It provides biographical information such as his name, date of birth, nationality, marital status, education, and contact information. It also outlines his 15 years of experience as an HSE Manager in oil production companies, including his roles and responsibilities. Finally, it lists his computer skills, languages, abilities, training courses, and essential work activities.
Walid Soliman, Safety Officer, CV
This document contains a CV for Walid Soliman that outlines his personal details, qualifications, computer skills, special courses taken, professional experience, and job description as a Safety Officer. It details his education background which includes courses in radio communication, NEBOSH, and OSHA. It also lists over 50 safety courses and trainings he has completed. His professional experience includes working as a Safety Officer for Weatherford Drilling International since 2008 and prior experience on offshore rigs. His job duties as Safety Officer are also outlined which include ensuring safety compliance, conducting safety inspections, trainings, and responding to safety issues.
Module 4 pre construction
This document outlines the pre-construction planning process for occupational safety and health on a construction project. It discusses examining contract documents to identify safety constraints, conducting a risk assessment to determine hazardous operations and high-risk tasks. It also covers planning logistics like site layout, temporary facilities, equipment needs, and storage areas. The document emphasizes that thorough pre-construction planning is important for budgeting, preparation, and proactively managing OSH risks during the work. Effective planning helps implement basic OSH requirements and make necessary arrangements to protect workers and others on-site.
CV_ARUN S R_HSEEO
Arun S R is seeking a position as a house engineer utilizing his engineering skills and over 1 year of experience in safety management. He has expertise in site management, production management, compliance management, hazard studies, health and safety, risk management, permitting for safety activities, audits, and quality control. He is a result-oriented professional with strong communication, problem-solving, and people management skills.
Cause of accident and prevention in construction industry
The document discusses causes of accidents in the construction industry and methods for prevention. It identifies the primary causes of accidents as unsafe acts and unsafe conditions. Unsafe acts include operating equipment without authority, disregarding safety procedures, and failure to use personal protective equipment. Unsafe conditions include wet/slippery floors and unguarded machinery. Accident prevention methods discussed include establishing safety policies and regulations, conducting safety trainings, ensuring the use of protective equipment, maintaining safe housekeeping practices, and having emergency response procedures and first aid resources. The document concludes that implementing effective safety measures can significantly reduce accident rates at construction sites.
Industrial Safety
This document discusses the importance of safety culture in industrial workplaces. It provides examples of how organizational commitment to safety, training, leadership, communication, and worker engagement can develop a strong culture that makes safety the top priority. The document also summarizes two case studies that assessed safety culture - the 2012 London Olympics construction projects which measured safety climate, and a Las Vegas construction project where a survey found priorities of productivity over safety and lack of management commitment. It concludes that cultivating a sustained safety culture is key to industrial safety.
SESSION : 1 Health & Safety Management : An overview
SESSION : 1 Health & Safety Management : An overview
What is Industrial Safety?
Why Manage Health & Safety – 3 Good Reasons
Cost and Consequences of Accidents – Video
Accident Causation theory
Common cause of accidents in construction
How Manage Health & Safety – HSG (65) Model
4 C’s for Positive Health & Safety Culture
Proactive & Reactive Monitoring
Principle of Control in H&S
Hazards & Risk Management
Safe System of work, PTW
Hierarchy of Control – Video
Principle of Accident prevention
MEEP – Material, Equipment, Environment & People
IITS - Information, Instruction , Training and Supervisions
Surya-CV
This curriculum vitae outlines Suryatej Mooliyl Vydyar's experience and qualifications. He has over 8 years of experience in health and safety roles in construction and oil/gas projects in the United Arab Emirates, Oman, Qatar, and India. His responsibilities included developing and implementing safety procedures, conducting inspections and trainings, investigating accidents, and ensuring compliance with regulations. He holds an International General Certificate in Occupational Health and Safety from NEBOSH UK and additional safety qualifications.
Thesis MSC
This thesis studied risks, safety climate, safety management practices, and situation awareness in offshore environments. It had four main objectives: 1) assess risks of offshore drilling and production platforms, 2) evaluate safety climate and safety management practices, 3) identify root causes of offshore accidents, and 4) examine safety and situation awareness of offshore crews. Various methods were used, including risk assessment techniques, a safety climate assessment toolkit, an accident root cause model, and interviews with offshore personnel. Key findings included identifying major hazards for offshore platforms, assessing the current safety climate and practices of companies, determining root causes of accidents, and factors affecting crew situation awareness. The study provided recommendations to improve offshore safety and risk management.
SAFETY OFFICER-CV-21.4.2015
Saiful Amin Jafri is applying for the position of Senior Safety Officer and has over 14 years of experience in safety roles across various industries including construction, oil and gas, and petrochemicals. He holds several safety certifications and has a diploma in mechanical engineering as well as fire safety. Jafri aims to further his career in safety and possesses skills in hazard identification, risk assessment, incident investigation, and safety compliance.
GHULAM MARCH 2015
The candidate is seeking a senior level position in industrial safety and has over 9 years of experience in the field. They have technical qualifications including NEBOSH and IOSH certifications. Responsibilities would include maintaining safety documents, conducting audits and inspections, advising on safety equipment purchases and maintenance, conducting safety training programs, and ensuring compliance with safety laws and standards. The candidate has worked as a Safety Officer for a construction company in Saudi Arabia on various industrial projects since 2005.
Safety health and environment
This document outlines the safety, health, environment and security plan for PT. Karinda Daya Perkasa. It discusses establishing a SHE management system to ensure work is performed safely and healthily. The contractor will base their site SHE program on 5 pillars: identifying risks, cultivating a safety culture, supervision, following safe work procedures, and inspections/audits. The plan also discusses organizing a safety committee, coordination internally and externally, and implementing programs like basic SHE rules, training, permitting, fire prevention and emergency response.
Seminar 141120202109-conversion-gate02
This document summarizes a seminar on construction site safety and management. It discusses why safety is important, including reducing costs from accidents, legal obligations, and protecting a company's reputation. It then outlines the key aspects of a safety management plan, including identifying hazards, developing controls and training, conducting inspections, and analyzing any accidents. The document provides examples of physical, biological, chemical, and ergonomic hazards common in construction. It emphasizes the importance of planning, communication through tools like signage and training, and ongoing review and improvement of safety practices.
Similar to IADC Certified SAFETY OFFICER Training (Detail) (20)
Cause of accident and prevention in construction industry
Cause of accident and prevention in construction industry
SESSION : 1 Health & Safety Management : An overview
SESSION : 1 Health & Safety Management : An overview
IADC Certified SAFETY OFFICER Training (Detail)
- 1. HUMAN ASSETS TRAINING CENTER Page 1 Human Assets Training Center P.O. 76717 Al-Khobar 31952 Kingdom of Saudi Arabia Mob: 0507403693 Fax: +966 3 849 3404 www.hatc-ksa.com PROPOSAL FOR IADC SAFETY OFFICER Safety starts very essential in the field of industries and constriction in very short it’s become human daily business therefore the professional way of safety approach is very necessary. IADC Construction Safety is the clean explanation about general construction in safety, chemical safety, and industrial safety orientation. Objective: By actively participating in this course, personnel will gain a basic knowledge in:- Safe Work Method Statements / Safe Work Practices An understanding of their roles in the event of an Emergency The importance of wearing the appropriate Personal Protective Equipment (PPE) The Basic Site HSE Rules & Regulations To ensure the effectiveness of the safety program, management usually places program administration in the hands of a safety director or manager of safety and health. To administer a safety program effectively requires considerable training Subjects: COMMON CAUSES OF ACCIDENTS PERSONAL PROTECTIVE EQUIPMENT HEALTH AND WELFARE FACILITIES SITE RULES & REGULATIONS MATERIAL HANDLING CHEMICAL SAFETY AWARENESS HAND TOOLS HOUSE KEEPING ENVIRONMENT ELECTRICAL SAFETY MANUAL HANDLING VEHICLE SAFETY MOBILE PLANT OR MACHINERY CRANES & LIFTING APPLIANCES TOOL BOX MEETING PERMIT TO WORK SYSTEM SCAFFOLDING LADDERS SAFETY EXCAVATION SAFETY WORKING AT HEIGHT HOUSE KEEPING ENVIRONMENT INCIDENTS & NEAR-MISS REPORTING FIRE SAFETIES ENVIRONMENT SAFETY AND EMERGENCY RESPONSE
- 2. HUMAN ASSETS TRAINING CENTER Page 2 Human Assets Training Center P.O. 76717 Al-Khobar 31952 Kingdom of Saudi Arabia Mob: 0507403693 Fax: +966 3 849 3404 www.hatc-ksa.com Contents: The major functions of the safety and health professional are contained within 5basic segments. The major are: 1. Hazard identification 2. Chemical safety 3. Manuel and mechanical lifting 4. Permit to work system. 5. Environment and emergency procedure Time Management: Total 5 days course Day 1 S.NO Subject 1 Common Causes of Accidents 2 Personal Protective Equipment 3 Health & Welfare Facilities 4 Site Rules & Regulations 5 Material Handling Day 2 S.NO SUBJECT 1 Chemical Safety Awareness Hand Tools 2 House Keeping Environment 3 Electrical Safety 4 Vehicle Safety 5 Mobile plant machinery Day 3 S.NO SUBJECT 1 Manual and Mechanical Lift 2 Cranes & Lifting Appliances 3 Tool Box Meeting 4 Practical Audit & Group Discussion 5 Practical Audit & Group Discussion
- 3. HUMAN ASSETS TRAINING CENTER Page 3 Human Assets Training Center P.O. 76717 Al-Khobar 31952 Kingdom of Saudi Arabia Mob: 0507403693 Fax: +966 3 849 3404 www.hatc-ksa.com Day 4 S.NO SUBJECT 1 Work to permit system 2 Scaffold safety 3 Excavation safety 4 Work at height 5 Practical audit and group discussion Day 5 S.NO SUBJECT 1 Fire safety 2 Environment safety and Emergency Response 3 Course review 4 Course review 5 EXAM Location: ALKHOBAR OR AL JUBAIL Note: other than ALKHOBAR OR AL JUBAIL, relocation fee is applicable with the course fee Certification: All the participants in the class will be certified on the bases of exam. All certificate which is given by HAT CENTER which is approved by Kingdom of Saudi Arabia Technical and Vocational Training Corporation as per kingdom regulatory Our certification is recognized and tracked by integrated number locking system Through our website, No one eligible for certificate of completion unless he attend 90% attendance and 70% exam result, otherwise he will gets certificate of attendance only.