Hyflex provides cold applied liquid waterproofing systems for roofs, balconies, and car parks. They have been developing, producing, and installing these systems for over 60 years. Hyflex has multiple branch locations across the UK and provides a national contracting service with local project management. Their systems include the Hyflex 10, Hyflex 10 Plus, and Hyflex 10 Profile, which are cold applied liquid membranes with guarantees of 10-15 years.
http://marispolymers.com/products/waterproofing-systems/inverted-flat-roof-waterproofing/
Inverted flat roof waterproofing combined with a thermal insulation is essential for a buildings waterproofing and energy saving thermal insulation. The MARISEAL SYSTEM® inverted flat roof waterproofing method offers a simple build-up waterproofing, that features a protected waterproofing membrane and loose laying insulation boards.
The inverted waterproofing insulation system is applicable for all types of flat roofs, as it offers an efficient solution for new construction but also for renovation of old flat roofs as is it possible to install an inverted roof over an existing roof build up.
Conventional Roofing - Impacts of Insulation Strategy and Membrane ColorGraham Finch
The document summarizes a study that monitored the performance of different roofing membrane colors (white, gray, black) and insulation strategies (stone wool, polyiso, hybrid) over two years. Key findings include:
1) Darker membrane colors experienced significantly higher surface temperatures, while lighter colors provided better heat reflection and energy efficiency.
2) The insulation strategy had a major impact on peak and lagging membrane and deck temperatures, with stone wool and hybrid configurations performing best.
3) Insulation type also influenced heat loss and gain, with stone wool and hybrid assemblies showing less heat transfer.
This presentation demonstrates how to apply the product Anydron 2K. The product is a liquid-applied waterproofing system, based on PU technology. The presentation demonstrates all the necessary steps such surface preparation, priming, application of the product, and additional protection. Visit http://www.ktisis.eu
IPANEX is a liquid admixture added to concrete to make it waterproof by densifying its microstructure. It works by controlling hydration to produce a more homogeneous, fine-grained structure with smaller, more tortuous pores that restrict water penetration. Testing shows IPANEX concrete has significantly reduced permeability and chloride ion ingress. It provides advantages like increased strength, durability, corrosion resistance and waterproofness without organic chemicals that could degrade over time. IPANEX is recommended for applications requiring impermeable concrete under water pressure like foundations, tanks, and marine structures.
Over a decade ago, while performing warranty reviews and condition assessments, RDH began to find water-filled blisters under many new cold-applied membranes. In some cases it was so severe that the premature replacement of entire roof assemblies was necessary. This presentation explains the science behind what was going on, and how we were able to develop a fix for future installations.
The document describes the Central Technical Service Department of a company. It includes:
1. An overview of the department which provides new product development, technical support, and training.
2. Descriptions of the roles of the Technical Head, Specification Manager, and Training Manager.
3. Details on the responsibilities of Technical Executives which include product demonstrations and quality control.
4. An overview of the company's waterproofing products and standards for surface preparation and treating critical areas like cracks.
Osmosis - The Bane of Liquid Applied Waterproofing MembranesGraham Finch
Presentation from 18th Annual Westford Symposium, Building Science Summer Camp. Presentation covers history of cold applied liquid waterproofing membranes up to discovery and proof of osmotic blistering failure. Results from recent testing of various membrane types
This document discusses concrete permeability and durability. It defines concrete and its composition, noting that concrete is made up of cement paste and aggregates. The cement paste binds the aggregates but is also porous, allowing water and chemicals to pass through. Several degradation mechanisms are described, all of which involve the penetration of water or other substances into the concrete. The document emphasizes that permeability determines a concrete's vulnerability, and that reducing permeability is key to improving durability. It describes different transport mechanisms by which substances can move through concrete, including diffusion, capillary action, and permeation.
http://marispolymers.com/products/waterproofing-systems/inverted-flat-roof-waterproofing/
Inverted flat roof waterproofing combined with a thermal insulation is essential for a buildings waterproofing and energy saving thermal insulation. The MARISEAL SYSTEM® inverted flat roof waterproofing method offers a simple build-up waterproofing, that features a protected waterproofing membrane and loose laying insulation boards.
The inverted waterproofing insulation system is applicable for all types of flat roofs, as it offers an efficient solution for new construction but also for renovation of old flat roofs as is it possible to install an inverted roof over an existing roof build up.
Conventional Roofing - Impacts of Insulation Strategy and Membrane ColorGraham Finch
The document summarizes a study that monitored the performance of different roofing membrane colors (white, gray, black) and insulation strategies (stone wool, polyiso, hybrid) over two years. Key findings include:
1) Darker membrane colors experienced significantly higher surface temperatures, while lighter colors provided better heat reflection and energy efficiency.
2) The insulation strategy had a major impact on peak and lagging membrane and deck temperatures, with stone wool and hybrid configurations performing best.
3) Insulation type also influenced heat loss and gain, with stone wool and hybrid assemblies showing less heat transfer.
This presentation demonstrates how to apply the product Anydron 2K. The product is a liquid-applied waterproofing system, based on PU technology. The presentation demonstrates all the necessary steps such surface preparation, priming, application of the product, and additional protection. Visit http://www.ktisis.eu
IPANEX is a liquid admixture added to concrete to make it waterproof by densifying its microstructure. It works by controlling hydration to produce a more homogeneous, fine-grained structure with smaller, more tortuous pores that restrict water penetration. Testing shows IPANEX concrete has significantly reduced permeability and chloride ion ingress. It provides advantages like increased strength, durability, corrosion resistance and waterproofness without organic chemicals that could degrade over time. IPANEX is recommended for applications requiring impermeable concrete under water pressure like foundations, tanks, and marine structures.
Over a decade ago, while performing warranty reviews and condition assessments, RDH began to find water-filled blisters under many new cold-applied membranes. In some cases it was so severe that the premature replacement of entire roof assemblies was necessary. This presentation explains the science behind what was going on, and how we were able to develop a fix for future installations.
The document describes the Central Technical Service Department of a company. It includes:
1. An overview of the department which provides new product development, technical support, and training.
2. Descriptions of the roles of the Technical Head, Specification Manager, and Training Manager.
3. Details on the responsibilities of Technical Executives which include product demonstrations and quality control.
4. An overview of the company's waterproofing products and standards for surface preparation and treating critical areas like cracks.
Osmosis - The Bane of Liquid Applied Waterproofing MembranesGraham Finch
Presentation from 18th Annual Westford Symposium, Building Science Summer Camp. Presentation covers history of cold applied liquid waterproofing membranes up to discovery and proof of osmotic blistering failure. Results from recent testing of various membrane types
This document discusses concrete permeability and durability. It defines concrete and its composition, noting that concrete is made up of cement paste and aggregates. The cement paste binds the aggregates but is also porous, allowing water and chemicals to pass through. Several degradation mechanisms are described, all of which involve the penetration of water or other substances into the concrete. The document emphasizes that permeability determines a concrete's vulnerability, and that reducing permeability is key to improving durability. It describes different transport mechanisms by which substances can move through concrete, including diffusion, capillary action, and permeation.
This document provides an overview of various waterproofing methods. It defines waterproofing and explains the importance. It then describes conventional methods like brick bat coba, bituminous treatments, and box-type waterproofing. It also covers modern techniques like crystalline waterproofing and flexible membrane waterproofing systems. For each method, it provides details on materials, application procedures, advantages, and limitations. The document serves as a comprehensive reference on traditional and contemporary waterproofing options.
Waterproofing prevents the passage of liquid water through structures and is important to apply where hydrostatic pressure may occur. It can be applied to the positive or negative side of structures. Common types include sheet membranes, liquid waterproofing, and bentonite or cementitious waterproofing. The document discusses definitions of waterproofing versus damp-proofing, why waterproofing is necessary to prevent structural damage, where and how water can enter structures, and appropriate locations and types of waterproofing applications.
The document discusses various aspects of waterproofing systems. It explains that conventional waterproofing involves applying membrane barriers to prevent water passage. It also notes that quality waterproofing is essential to preserve building envelope water-tightness, as below-grade areas and plaza decks experience hydrostatic pressure. The document then provides definitions for waterproofing versus damp-proofing and discusses different waterproofing materials and methods, including sheet membranes, liquid systems, bentonite, metal oxide, and cementitious options. It emphasizes that substrate preparation and multiple protective layers are important for effective waterproofing.
This document is a project report submitted by Sagar Kumar for the partial fulfilment of the requirements for a Master's degree in Business Administration. The report provides information on Sagar Kumar's internship with MYK LATICRETE INDIA PVT.LTD. in Kolkata. The report includes details about the company such as its origin, growth, products, organizational hierarchy, and future plans. It also discusses Sagar Kumar's work profile and contributions during the training period.
PMC-S waterproofing system is a 8 years innovative R&D effort by Jiazhou New Waterproofing Co., Ltd. and Southwest Jiaotong University.This system is a specialized waterproofing solution for tunnels and underground projects.(If applied to exposed sites like roof,etc,2cm thickness protective layer is required).
This system won China's highest honor National Science and Technology Progress Award in 2011 and also won 6 Invention Patents and 8 Utility-Model Patents.
PMC-S is successfully applied in Munigou Highway Tunnels(over 3000 meters altitude,extreme conditions),Shenzhen LNG Terminal(China's first LNG Terminal),Najing Youth Olympic Axis Underground Project(the biggest underground project),Langzhong Railway Station Underpass,Pengzhou Petrochemical Tanks Bottom Waterproofing projects,etc.
The main Benefits of PMC-S:
1.Fast curing:the membrane forms within 3 to 8 seconds after spraying on by instant oxidantion and deoxidantion chemical change in the spray gun.
2.30% Self-recovering:the membrane absorb the moisture to self-recover from the wound by construction operation
3.Long existing with the building:Unlike other waterproofing work,there will be a reparing after 3-5 years.With PMC-S applied projects,the endless and huge amount of budget for repairing is no longer a problem.
4.Fully bonded system provides excellent watertightness, preventing development of
water migration in both concrete membrane interfaces
5.Eco-friendly,non toxic component
6.Efficient Operation,fast installation,shorten the construction period time
7.Fireproof: A1 Grade
WATERGUARD GRS is a polyester nonwoven felt, reinforced with glass filament for greater durability
It is based on technology developed by the FAIRMATE through continuous research and more than 30 years of experience in the waterproofing market
WATERGUARD GRS is a high performance product that can satisfy a broad range of reinforcement requirements and the most demanding specifications.
It combines the advantages of PET nonwovens with the strength of glass.
By using WATERGUARD GRS, less liquid compounds are needed, resulting in lower costs
It is easier to control the thickness of the waterproofing membranes when WATERGUARD GRS is used, thus the water proofing membrane is more uniform
The Capitol Group is a specialist contractor established in 1993 that provides integrated building, mechanical, electrical, and facility maintenance services. It prides itself on delivering high quality and reliable services including building fit-outs, maintenance, and new construction projects. The company strives to maintain safety and quality standards through qualified personnel and ongoing training programs.
ICS Cool Energy is a leading European provider of temperature control solutions with over 25 years of experience. They offer sales, rental, and servicing of chillers and other equipment across the UK and Ireland. ICS Cool Energy has a global presence with offices across Europe and resellers in Asia, South America, and Australasia. They provide bespoke, turnkey solutions and 24/7 service with accredited engineers.
Ad Hoc Property Management provides property security services using property guardians who live in temporarily vacant properties. This prevents issues like break-ins, squatting, and vandalism while saving property owners up to 80% compared to traditional security. Ad Hoc installs vetted guardians to live in properties as residents or operate commercial businesses, protecting the properties and saving on costs like business rates. References from clients highlight the cost savings and effective security provided by Ad Hoc's property guardian model.
Wessex Shopfitters Ltd. offers liquid roof coatings that can protect against leaks for up to 25 years when installed. They provide roof coating installation and have experience coating roofs for various stores. Their services include an inspection of the roof, surface preparation, application of the coating, and a guarantee backed by insurance.
Hydratech Industries designs and manufactures hydraulic cylinders and accumulators for motion compensation applications in offshore oil and gas industries. They specialize in custom cylinders from concept to completion, with bores up to 30 inches and strokes up to 60 feet. Hydratech focuses on quality, safety, and meeting customers' specific needs through innovative sealing and surface technologies to protect cylinders in harsh marine environments.
Emma Cronin is the Strategic Channel Partner Manager at Wireless Network Developments (UK) Ltd, the UK operator of the Sigfox low power wide area network. The document discusses WNDUK's progress in building out the Sigfox network in the UK, including personnel changes and expanding their team. It outlines their channel partner model and examples of pilot projects and potential customers in various verticals like logistics, manufacturing, utilities and more.
PROGEN General Trading LLC is an engineering trading company based in the UAE that deals in HVAC equipment, lighting, generators, and building management systems. It aims to be a reliable partner for clients by providing quality products and services. The company's staff have experience in the UAE market and management strives for innovation.
This document provides information on commercial roofing systems from XtraFlex. It discusses XtraFlex's commitment to green technology and sustainable manufacturing practices. The document includes descriptions of various XtraFlex roof system options like self-adhered, heat welded, mechanically attached, and liquid applied systems. Application instructions and benefits of XtraFlex systems are also summarized.
Liddle Doors is a specialist manufacturer of high security steel products that are tested and certified to stringent security standards. They produce a wide range of security doors, shutters, grilles, and other products to protect buildings from vandalism and attacks. Liddle works closely with clients to design bespoke security solutions and provide installation and support services.
MyTradeTV Glass and Glazing Digital Magazine September 2015mytradetv
The MyTradeTV Glass and Glazing Digital Magazine is full of Aluminium, Conservatories, Doors, Glazing Events, Glass, Machinery, Recruitments, Windows, uPVC, Double Glazing, Triple Glazing News, Information, Videos, Podcasts.
Veolia Environment is a global leader in environmental services with over 300,000 employees worldwide. Dalkia, a subsidiary of Veolia, manages over 96,000 installations including housing, healthcare facilities, sports & cultural venues, education & research facilities, industrial plants, commercial buildings and more. Dalkia provides energy and facility management services to customers across various contract types with the goals of optimizing costs, guaranteeing safety and comfort, and forming long-term collaborative partnerships.
JKF has been a supplier of clean air systems for industrial businesses since 1957. Their complete range of high quality components for ventilation and dust extraction systems improves both the indoor and outdoor environments. JKF's products provide benefits like a healthier work environment for employees, more sustainable production, improved product quality, and increased profitability for customers due to factors like reduced sick leave and energy savings. JKF has manufacturing facilities and sales subsidiaries around the world to ensure their clean air solutions are accessible to customers globally.
Xuber provides specialist insurance software to insurance specialists, end-to-end. You’re trusted to provide consistent, reliable cover. So is Xuber. When events occur, you need the systems, processes and solutions to restore order. We’re not so different. The Xuber Company Overview Infographic provides a quick snapshot of our history, capabilities, partners and valued customers.
This document provides an overview of various waterproofing methods. It defines waterproofing and explains the importance. It then describes conventional methods like brick bat coba, bituminous treatments, and box-type waterproofing. It also covers modern techniques like crystalline waterproofing and flexible membrane waterproofing systems. For each method, it provides details on materials, application procedures, advantages, and limitations. The document serves as a comprehensive reference on traditional and contemporary waterproofing options.
Waterproofing prevents the passage of liquid water through structures and is important to apply where hydrostatic pressure may occur. It can be applied to the positive or negative side of structures. Common types include sheet membranes, liquid waterproofing, and bentonite or cementitious waterproofing. The document discusses definitions of waterproofing versus damp-proofing, why waterproofing is necessary to prevent structural damage, where and how water can enter structures, and appropriate locations and types of waterproofing applications.
The document discusses various aspects of waterproofing systems. It explains that conventional waterproofing involves applying membrane barriers to prevent water passage. It also notes that quality waterproofing is essential to preserve building envelope water-tightness, as below-grade areas and plaza decks experience hydrostatic pressure. The document then provides definitions for waterproofing versus damp-proofing and discusses different waterproofing materials and methods, including sheet membranes, liquid systems, bentonite, metal oxide, and cementitious options. It emphasizes that substrate preparation and multiple protective layers are important for effective waterproofing.
This document is a project report submitted by Sagar Kumar for the partial fulfilment of the requirements for a Master's degree in Business Administration. The report provides information on Sagar Kumar's internship with MYK LATICRETE INDIA PVT.LTD. in Kolkata. The report includes details about the company such as its origin, growth, products, organizational hierarchy, and future plans. It also discusses Sagar Kumar's work profile and contributions during the training period.
PMC-S waterproofing system is a 8 years innovative R&D effort by Jiazhou New Waterproofing Co., Ltd. and Southwest Jiaotong University.This system is a specialized waterproofing solution for tunnels and underground projects.(If applied to exposed sites like roof,etc,2cm thickness protective layer is required).
This system won China's highest honor National Science and Technology Progress Award in 2011 and also won 6 Invention Patents and 8 Utility-Model Patents.
PMC-S is successfully applied in Munigou Highway Tunnels(over 3000 meters altitude,extreme conditions),Shenzhen LNG Terminal(China's first LNG Terminal),Najing Youth Olympic Axis Underground Project(the biggest underground project),Langzhong Railway Station Underpass,Pengzhou Petrochemical Tanks Bottom Waterproofing projects,etc.
The main Benefits of PMC-S:
1.Fast curing:the membrane forms within 3 to 8 seconds after spraying on by instant oxidantion and deoxidantion chemical change in the spray gun.
2.30% Self-recovering:the membrane absorb the moisture to self-recover from the wound by construction operation
3.Long existing with the building:Unlike other waterproofing work,there will be a reparing after 3-5 years.With PMC-S applied projects,the endless and huge amount of budget for repairing is no longer a problem.
4.Fully bonded system provides excellent watertightness, preventing development of
water migration in both concrete membrane interfaces
5.Eco-friendly,non toxic component
6.Efficient Operation,fast installation,shorten the construction period time
7.Fireproof: A1 Grade
WATERGUARD GRS is a polyester nonwoven felt, reinforced with glass filament for greater durability
It is based on technology developed by the FAIRMATE through continuous research and more than 30 years of experience in the waterproofing market
WATERGUARD GRS is a high performance product that can satisfy a broad range of reinforcement requirements and the most demanding specifications.
It combines the advantages of PET nonwovens with the strength of glass.
By using WATERGUARD GRS, less liquid compounds are needed, resulting in lower costs
It is easier to control the thickness of the waterproofing membranes when WATERGUARD GRS is used, thus the water proofing membrane is more uniform
The Capitol Group is a specialist contractor established in 1993 that provides integrated building, mechanical, electrical, and facility maintenance services. It prides itself on delivering high quality and reliable services including building fit-outs, maintenance, and new construction projects. The company strives to maintain safety and quality standards through qualified personnel and ongoing training programs.
ICS Cool Energy is a leading European provider of temperature control solutions with over 25 years of experience. They offer sales, rental, and servicing of chillers and other equipment across the UK and Ireland. ICS Cool Energy has a global presence with offices across Europe and resellers in Asia, South America, and Australasia. They provide bespoke, turnkey solutions and 24/7 service with accredited engineers.
Ad Hoc Property Management provides property security services using property guardians who live in temporarily vacant properties. This prevents issues like break-ins, squatting, and vandalism while saving property owners up to 80% compared to traditional security. Ad Hoc installs vetted guardians to live in properties as residents or operate commercial businesses, protecting the properties and saving on costs like business rates. References from clients highlight the cost savings and effective security provided by Ad Hoc's property guardian model.
Wessex Shopfitters Ltd. offers liquid roof coatings that can protect against leaks for up to 25 years when installed. They provide roof coating installation and have experience coating roofs for various stores. Their services include an inspection of the roof, surface preparation, application of the coating, and a guarantee backed by insurance.
Hydratech Industries designs and manufactures hydraulic cylinders and accumulators for motion compensation applications in offshore oil and gas industries. They specialize in custom cylinders from concept to completion, with bores up to 30 inches and strokes up to 60 feet. Hydratech focuses on quality, safety, and meeting customers' specific needs through innovative sealing and surface technologies to protect cylinders in harsh marine environments.
Emma Cronin is the Strategic Channel Partner Manager at Wireless Network Developments (UK) Ltd, the UK operator of the Sigfox low power wide area network. The document discusses WNDUK's progress in building out the Sigfox network in the UK, including personnel changes and expanding their team. It outlines their channel partner model and examples of pilot projects and potential customers in various verticals like logistics, manufacturing, utilities and more.
PROGEN General Trading LLC is an engineering trading company based in the UAE that deals in HVAC equipment, lighting, generators, and building management systems. It aims to be a reliable partner for clients by providing quality products and services. The company's staff have experience in the UAE market and management strives for innovation.
This document provides information on commercial roofing systems from XtraFlex. It discusses XtraFlex's commitment to green technology and sustainable manufacturing practices. The document includes descriptions of various XtraFlex roof system options like self-adhered, heat welded, mechanically attached, and liquid applied systems. Application instructions and benefits of XtraFlex systems are also summarized.
Liddle Doors is a specialist manufacturer of high security steel products that are tested and certified to stringent security standards. They produce a wide range of security doors, shutters, grilles, and other products to protect buildings from vandalism and attacks. Liddle works closely with clients to design bespoke security solutions and provide installation and support services.
MyTradeTV Glass and Glazing Digital Magazine September 2015mytradetv
The MyTradeTV Glass and Glazing Digital Magazine is full of Aluminium, Conservatories, Doors, Glazing Events, Glass, Machinery, Recruitments, Windows, uPVC, Double Glazing, Triple Glazing News, Information, Videos, Podcasts.
Veolia Environment is a global leader in environmental services with over 300,000 employees worldwide. Dalkia, a subsidiary of Veolia, manages over 96,000 installations including housing, healthcare facilities, sports & cultural venues, education & research facilities, industrial plants, commercial buildings and more. Dalkia provides energy and facility management services to customers across various contract types with the goals of optimizing costs, guaranteeing safety and comfort, and forming long-term collaborative partnerships.
JKF has been a supplier of clean air systems for industrial businesses since 1957. Their complete range of high quality components for ventilation and dust extraction systems improves both the indoor and outdoor environments. JKF's products provide benefits like a healthier work environment for employees, more sustainable production, improved product quality, and increased profitability for customers due to factors like reduced sick leave and energy savings. JKF has manufacturing facilities and sales subsidiaries around the world to ensure their clean air solutions are accessible to customers globally.
Xuber provides specialist insurance software to insurance specialists, end-to-end. You’re trusted to provide consistent, reliable cover. So is Xuber. When events occur, you need the systems, processes and solutions to restore order. We’re not so different. The Xuber Company Overview Infographic provides a quick snapshot of our history, capabilities, partners and valued customers.
GlobMill is happy to announce the scaling up its services in the security industry. Our dedicated team can provide engineering, installing and maintaining works on CCTV, access control, fire alarms, intrusion detection systems and other correlated activities in the security area.
FSPL provides integrated green energy and facility management solutions, including solar power projects, building maintenance, and energy management. It offers services such as electrical work, plumbing, HVAC, and landscaping. FSPL aims to reduce clients' costs and environmental impact through preventative maintenance programs and energy audits. It has experience serving various industries and manages facilities across India.
The document summarizes a business proposal to establish a PVC window production company in Saudi Arabia called Fenstera. It discusses Hammpton's experience in construction, the quality of materials and technology that will be used from German partners Aluplast and Gretsch-Unitas GmbH. It provides market analysis of the housing and window market in Saudi Arabia, outlines the production process, projected sales figures under optimistic, realistic and pessimistic scenarios, and total investment costs.
LOCTITE SF 7200 is an aerosol cleaner designed to aid in the removal of cured chemical gaskets. It works by softening gasket materials on flanges, eliminating excessive scraping. Once applied, it forms a foam layer preventing it from running off while working. It is suitable for removing gaskets from metal flanges, particularly aluminum, without damaging flange surfaces. Typical applications include removing all types of chemical gaskets from metal flanges.
Marioff is a leading provider of water mist fire suppression systems called HI-FOG. HI-FOG uses less water than sprinkler systems but is just as effective at controlling and suppressing fires. It has received over 100 approvals based on thousands of fire tests. Marioff also offers lifecycle services to ensure reliable system performance. HI-FOG is suitable for various industries and has protected many famous buildings and cruise ships.
Ibstock aims to operate sustainably by achieving zero workplace accidents, increasing water recovery and energy efficiency, reducing waste, and investigating alternative energy sources. It supports local communities through employment, sourcing materials locally, and community sponsorship. It also operates efficiently through water recycling, waste recycling, and energy generation from landfill gas.
The document provides an overview of several architectural projects that feature Ibstock bricks. It includes summaries of Elmfield Court, a residential development in London by CF Moller featuring Ibstock Bradgate Light Buff bricks; the Courtyard House in London by Dallas Pierce Quintero featuring vertically laid Ibstock Staffordshire Slate Blue bricks; and the Foundry, an industrial development in Salford by Sixtwo Architects featuring brick facades. It also mentions Ibstock brick successes at the 40th Brick Awards and profiles new shades of grey bricks introduced by Ibstock.
The document provides an overview of several architectural projects that feature Ibstock bricks. It includes summaries of Elmfield Court, a residential development in London by CF Moller featuring Ibstock Bradgate Light Buff bricks; the Courtyard House in London by Dallas Pierce Quintero featuring vertically laid Ibstock Staffordshire Slate Blue bricks; and the Foundry, an industrial development in Salford by Sixtwo Architects featuring brick facades. It also mentions Ibstock brick successes at the 40th Brick Awards and profiles new shades of grey bricks introduced by Ibstock.
Ibstock manufactures clay bricks and pavers at 25 sites across Great Britain. It holds several certifications related to quality, environmental management, and responsible sourcing. Ibstock's products help buildings meet sustainability standards and ratings like BREEAM. Bricks on average travel only 62 miles from the manufacturing site, reducing emissions. The company undertakes various sustainability initiatives regarding resources, communities, and the environment.
1st May 2016 Roof Windows Product Selector and Price ListJagjeet Singh Bath
FAKRO roof windows are designed to provide natural light and be a focal point in any room. They offer high quality materials, including sustainably sourced pine, and best-in-class energy efficiency. FAKRO windows have numerous certifications attesting to their performance, security, and environmental sustainability. Their innovative designs and manufacturing processes allow FAKRO to continuously improve their products and set industry standards.
The document provides information on Fakro folding loft ladders, including technical specifications, warranty information, and descriptions of different ladder models. Key details include:
- Ladders are fully assembled and ready for quick installation in the ceiling. They come with a 3-year warranty.
- Models include the LWK Komfort, LWZ Plus, and LWL Lux. Features vary but include insulation, easy installation systems, and safety elements like handrails.
- Dimensions and specifications are provided for different ladder sizes to help select the right model. Additional accessories are also available.
The document discusses Fakro's flat roof window and access roof light products. It provides details on the different types of windows available, including type C windows with domes and type F windows with innovative glazing units. The windows are designed to provide natural light to buildings with flat roofs. They have high thermal insulation properties and security features. The document outlines the product ranges, technical specifications, sizes available, and benefits of Fakro's flat roof windows.
Hyflex completed roof refurbishment works at St Mary's College on a tight schedule. The project was part of a £400 million school refurbishment program. Hyflex replaced failing roofs using its expertise in design, procurement, and on-site management. Through its experienced workforce and minimal disruption, Hyflex was able to finish the work during the college holiday as required to remove scaffolding before students returned. The roofing work was completed on time, on budget, and to a high quality standard.
Hyflex - Farringdon Academy School, Sunderland TestimonialJagjeet Singh Bath
Hyflex received top marks for their work on the Sunderland School project, with an associate director rating them 9 out of 10 for quality and 10 out of 10 for completing the contract on budget. The associate director praised Hyflex for providing an excellent service with reliable workers and a helpful commercial team, and both the consultants and end-users were delighted with the overall performance and quality of the finished product.
Hyflex - Farringdon Academy School, Sunderland Testimonial
Hyflex Brochure - August 2015
1. liquid waterproofing systems – providing the solution
The national cold applied
waterproofing specialist
Glasgow
St Mungo Street
Bishopbriggs
Glasgow
G64 1JF
Tel: 0141 772 3229
Fax: 0141 762 2215
Newcastle
Amasco House
1 Garwood Street
South Shields
Tyne Wear NE33 5AG
Tel: 0191 427 2785
Fax: 0191 427 2786
Leeds
Aberford Road
Woodlesford
Leeds LS26 8LG
Tel: 0113 282 2943
Fax: 0113 282 0800
Manchester
Richmond Road
Trafford Park
Manchester M17 1RE
Tel: 0161 877 1940
Fax: 0161 877 1930
Birmingham
Amasco House
101 Powke Lane
Cradley Heath
West Midlands
B64 5PX
Tel: 0121 502 9580
Fax: 0121 502 9581
Cheltenham
Unit R2, Kingsville Road
Kingsditch Industrial Estate
Cheltenham
Gloucestershire
GL51 9NZ
Tel: 01242 227654
Fax: 01242 263038
London
Unit 6
New England Industrial Estate
Gascoigne Road
Barking
Essex IG11 7NZ
Tel: 020 8911 3719
Fax: 020 8911 3718
Hyflex Head Office: Amasco House, 101 Powke Lane, Cradley Heath, West Midlands B64 5PX
Tel: 0121 502 9580 Fax: 0121 502 9581 Email: enquiries@hyflex.co.uk www.hyflex.co.uk
The National Service
European Liquid
Waterproofing Association
Hyflex10Plus
IncorporatingHyflexBaseSheetcoldappliedforapplicationovercompressiblesubstrates
Hyflex10Profile
Thecoldappliedwaterproofingsystemforpitchedandprofiledroofs
ExemplarRoofing
Thecompleteliquidcoldappliedreinforcedroofwaterproofingsystem
ExemplarforBalconiesandWalkways
Theheavydutycoldappliedreinforcedwaterproofingandsurfacingsystemforbalconies,walkways,rampsandterraces
Hyflex10
Thecoldappliedhighperformancespecification
LIquidAppliedWaterproofing
TheSystems
Hyflex15
Thecoldappliedtopoftherangespecification
2. Hyflex Liquid Systems provide the complete solution to waterproofing problems.
The company has been successfully involved in developing, producing and installing
cold applied liquid waterproofing and insulation systems for roofs, balconies and
car parks for over sixty years.
Today Hyflex is part of the international IKO Group
who are world leaders in waterproofing systems,
with manufacturing plants in the USA, Canada
and across Europe.
Our aim is to be your first choice.
The national cold applied
waterproofing specialist
The Hyflex Network
Hyflex has a network of strategically located branches across the
UK enabling it to provide a focused local service on a national basis.
The National Contracting Service
Each branch takes sole responsibility for their projects, from initial
diagnostic survey and report through to contract completion using
only qualified operatives, supervised by local contract management.
A method statement and risk assessment are produced for each
contract by the designated Contracts Manager.
Central Services
The branch activities are backed by Hyflex Central Services who
provide estimating, purchasing and technical support. Hyflex is
also competent to act as Principal Contractor, if a project comes
under the scope of CDM regulations and as Planning Supervisor
if required.
Health and Safety
Hyflex is committed to providing a safe working environment
for clients, the public and our workforce. To this end we have
a documented Health and Safety Policy supported by full time,
qualified safety advisors ensuring compliance with both company
rules and current legislation.
Guarantees
Our philosophy is to offer an integrated guarantee covering both
materials and workmanship for all Hyflex specifications. These
guarantees can cover a period of ten or fifteen years depending
on the Hyflex system specified.
Insurance
Hyflex, in order to give our clients total comfort, carry substantial
insurance for third party and employer’s liability, contractors all
risks and professional indemnity.
Quality
Hyflex operates a Quality Management System to BS EN ISO
9001:2000, assessed and audited by SGS. The company has
operated a Quality Management System since 1992. In addition
we are Investors in People accredited and are active members of
the European Liquid Waterproofing Association.
Clients
The company’s customers vary from single unit property owners
to major blue chip companies with multi site property portfolios,
including local and national government agencies, educational
bodies, health trusts, facility management companies, housing
associations, major retailers and their professional advisors.
liquid waterproofing systems – providing the solution
3. Hyflex Liquid Systems provide the complete solution to waterproofing problems.
The company has been successfully involved in developing, producing and installing
cold applied liquid waterproofing and insulation systems for roofs, balconies and
car parks for over sixty years.
Today Hyflex is part of the international IKO Group
who are world leaders in waterproofing systems,
with manufacturing plants in the USA, Canada
and across Europe.
Our aim is to be your first choice.
The national cold applied
waterproofing specialist
The Hyflex Network
Hyflex has a network of strategically located branches across the
UK enabling it to provide a focused local service on a national basis.
The National Contracting Service
Each branch takes sole responsibility for their projects, from initial
diagnostic survey and report through to contract completion using
only qualified operatives, supervised by local contract management.
A method statement and risk assessment are produced for each
contract by the designated Contracts Manager.
Central Services
The branch activities are backed by Hyflex Central Services who
provide estimating, purchasing and technical support. Hyflex is
also competent to act as Principal Contractor, if a project comes
under the scope of CDM regulations and as Planning Supervisor
if required.
Health and Safety
Hyflex is committed to providing a safe working environment
for clients, the public and our workforce. To this end we have
a documented Health and Safety Policy supported by full time,
qualified safety advisors ensuring compliance with both company
rules and current legislation.
Guarantees
Our philosophy is to offer an integrated guarantee covering both
materials and workmanship for all Hyflex specifications. These
guarantees can cover a period of ten or fifteen years depending
on the Hyflex system specified.
Insurance
Hyflex, in order to give our clients total comfort, carry substantial
insurance for third party and employer’s liability, contractors all
risks and professional indemnity.
Quality
Hyflex operates a Quality Management System to BS EN ISO
9001:2000, assessed and audited by SGS. The company has
operated a Quality Management System since 1992. In addition
we are Investors in People accredited and are active members of
the European Liquid Waterproofing Association.
Clients
The company’s customers vary from single unit property owners
to major blue chip companies with multi site property portfolios,
including local and national government agencies, educational
bodies, health trusts, facility management companies, housing
associations, major retailers and their professional advisors.
liquid waterproofing systems – providing the solution
4. liquid waterproofing systems – providing the solution
The system comes with a 10 year
guarantee covering both materials
and workmanship.
Hyflex 10 is ideally suited for use
over traditional roofing membranes,
such as asphalt and reinforced
bituminous membranes. Applied
in liquid form it is also particularly
suitable for intricate detail work.
Hyflex 10
Hyflex 10 is a proven, high
performance waterproofing
system made up of rubber
modified, bituminous
coatings reinforced with
two polyester carriers.
• Seamless
• Light in weight
• Easily maintained
• Suitable for
maintenance traffic
• Cold applied
• AA fire rating
• 10 year guarantee
• Long life expectancy
• Single source security
• Revival system available
• Optional colour finishes
• Excellent value for money
• BBA certified
Key Features
5. Hyflex 15
Base Coat
Hyflex 10 Plus
Base Coat
Hyflex Membrane
Hyflex Cold
Bond Adhesive
Hyflex Roofing Solar
Reflective Finish
Hyflex 10 Plus
Finish Coat
Installation Hyflex 10 Plus
Hyflex Base Sheet
Hyvodex Primer
Substrate
Hyflex Membrane
Hyflex 15
Base Coat
Hyflex Roofing Solar
Reflective Finish
Hyflex 15
Finish Coat
Installation Hyflex 15
Hyflex 15
Finish Coat
Hyflex Membrane
Hyvodex Primer
Substrate
Hyflex 10
Base Coat
Hyflex Membrane
Hyflex 10
Base Coat
Hyflex Roofing Solar
Reflective Finish
Hyflex 10
Finish Coat
Installation Hyflex 10
Hyflex Membrane
Hyvodex Primer
Substrate
For further information please call:
0121 502 9580
e-mail us
enquiries@hyflex.co.uk
or visit our webpage
www.hyflex.co.uk
flame free waterproofing – providing the solution
Hyflex: Amasco House, 101 Powke Lane, Cradley Heath, West Midlands B64 5PX
Application
After preparing the surface in the appropriate way apply by
brush or roller to the main areas and by brush to the detail
areas in the following sequence.
Hyvodex Primer, a low viscosity, solvent based
bituminous primer.
Hyflex Base Coat, a bituminous high build liquid coating,
available in both solution (winter) and emulsion
(summer) formulations.
Hyflex Membrane, a 50 gramme bi-component polyester/
polyamide reinforcement membrane, which because of its
thermally welded composition provides high tensile strength
and puncture resistance to the system.
Hyflex Membrane D, a warp knitted polyester membrane
with superb drape characteristics which is designed to
facilitate work on complex details. In addition, in stress
situations at upstands and flashings, it provides
exceptional strength and flexibility to the system.
Hyflex Base Coat, a bituminous high build liquid coating,
available in both solution (winter) and emulsion
(summer) formulations.
Hyflex Finish Coat, a rubber modified liquid bitumen
designed to give maximum elasticity to the weathering
layer and resistance to flexural fatigue. Also available in
winter and summer grades.
Hyflex Roofing Solar Reflective Finish, provides the
standard solar reflective coating, however where design
considerations dictate, colour finishes are available.
For further details and downloadable specification go to:
NBS Plus - Section J31- Liquid Applied Waterproof Roof
Reference - 110 Cold Applied Roof Coverings.
Hyflex 10
Product details
Standard Specification
• Hyvodex Primer @ 6.5m2
/l
• Hyflex Base Coat @ 1.0m2
/l
• Hyflex Membrane
• Hyflex Base Coat @ 1.0m2
/l
• Hyflex Membrane
• Hyflex Finish Coat @ 1.0m2
/l
• Hyflex Roofing Solar Reflective Finish 10m2
/l
Coverings
6. liquid waterproofing systems – providing the solution
Complete with a 10 year guarantee covering
both materials and workmanship.
Where design requirements call for insulation,
Hyflex 10 Plus insulation is available as an
integral part of the system.
Hyflex 10 Plus uses the same proven
waterproofing constituents as Hyflex 10 with
the addition of an SBS modified, polyester
reinforced base sheet which acts as a carrier
for the liquid coatings. This is bonded to the
substrate using Hyflex Cold Bond liquid adhesive.
This offers additional puncture resistance which
makes the system more appropriate for use
over compressible substrates.
Hyflex 10 Plus
Cold applied liquid roof
waterproofing designed
for use over compressible
substrates such as insulation,
or over substrates which
are not suitable for direct
application of a liquid coating.
Key Features
• Seamless
• Light in weight
• Easily maintained
• Suitable for
maintenance traffic
• Cold applied
• AA fire rating
• 10 year guarantee
• Long life expectancy
• Single source security
• Revival system available
• Optional colour finishes
• Excellent value for money
• BBA certified
• Improved puncture
resistance
• Suitable for use over
insulation
7. Hyflex 15
Base Coat
Hyflex 10 Plus
Base Coat
Hyflex Membrane
Hyflex Cold
Bond Adhesive
Hyflex Roofing Solar
Reflective Finish
Hyflex 10 Plus
Finish Coat
Installation Hyflex 10 Plus
Hyflex Base Sheet
Hyvodex Primer
Substrate
Hyflex Membrane
Hyflex 15
Base Coat
Hyflex Membrane
Hyvodex Primer
Substrate
Hyflex 10
Base Coat
Hyflex Membrane
Hyflex 10
Base Coat
Hyflex Roofing Solar
Reflective Finish
Hyflex 10
Finish Coat
Installation Hyflex 10
Hyflex Membrane
Hyvodex Primer
Substrate
Application
After preparing the surface in the appropriate way apply by
brush or roller to the main areas and by brush to the detail
areas in the following sequence.
Hyvodex Primer, a low viscosity, solvent based
bituminous primer.
Hyflex Cold Bond Adhesive, which is a PU adhesive
Hyflex Base Sheet, an SBS modified base sheet reinforced
with a 180 gramme polyester fleece.
Hyflex Base Coat, a bituminous high build liquid coating,
available in both solution (winter) and emulsion
(summer) formulations.
Hyflex Membrane, a 50 gramme bi-component polyester/
polyamide reinforcement membrane, which because of its
thermally welded composition provides high tensile strength
and puncture resistance to the system.
Hyflex Membrane D, a warp knitted polyester membrane
with superb drape characteristics which is designed to
facilitate work on complex details. In addition, in stress
situations at upstands and flashings, it provides exceptional
strength and flexibility to the system.
Hyflex Finish Coat, a filled bituminous high build liquid
coating, available in both solution (winter) and emulsion
summer) formulations.
Hyflex Roofing Solar Reflective Finish, provides the standard
solar reflective coating, however where design considerations
dictate, colour finishes are available.
For further details and downloadable specification go to:
NBS Plus - Section J31- Liquid Applied Waterproof Roof
Reference - 110 Cold Applied Roof Coverings.
Hyflex 10 Plus
Product details
Standard Specification
• Hyvodex Primer @ 6.5m2
/l
• Hyflex Cold Bond Adhesive @ 1.0m2
/l
• Hyflex Base Sheet
• Hyflex Base Coat @ 1.0m2
/l
• Hyflex Membrane
• Hyflex Finish Coat @ 1.0m2
/l
• Hyflex Roofing Solar Reflective Finish 10m2
/l
For further information please call:
0121 502 9580
e-mail us
enquiries@hyflex.co.uk
or visit our webpage
www.hyflex.co.uk
flame free waterproofing – providing the solution
Hyflex: Amasco House, 101 Powke Lane, Cradley Heath, West Midlands B64 5PX
Coverings
8. liquid waterproofing systems – providing the solution
Applied in liquid form, Hyflex 10 Profile
will waterproof any profile.
Overlap joints and mechanical fixings
are reinforced with a flexmat polyester
reinforcement membrane, embedded
in the liquid coating to provide a flexible
and effective waterproofing system.
Hyflex 10
Profile
Hyflex 10 Profile uses proven
coating technology to provide
an effective, lightweight
overlay waterproofing system
and is ideally suited for
use over old and weathered
roofs, such as coated
metal roof sheets.
• Seamless
• Light in weight
• Low maintenance
• Suitable for
maintenance traffic
• Cold applied
• AA fire rating
• 10 year guarantee
• Long life expectancy
• Single source security
• Revival system available
• Optional colour finishes
• Excellent value for money
Key Features
9. Application
After preparing the surface, apply by brush or roller to main
areas and by brush to detail areas in the following sequence.
Hyflex Primer, a low viscosity, solvent based
bituminous primer.
Hyflex 10 Profile Base Coat, a bituminous, high build
liquid coating available in both solution (winter) and emulsion
(summer) formulations, applied to laps and fixings.
Hyflex Flexmat, a chopped strand polyester mat for
reinforcing overlaps and fixings.
Hyflex 10 Profile Base Coat, a bituminous, high build liquid
coating available in both solution (winter) and emulsion
(summer) formulations.
Hyflex 10 Profile Finish Coat, a rubber modified liquid
bitumen designed to give maximum elasticity to the
weathering layer and resistance to flexural fatigue. Available
in winter and summer grades.
Hyflex Roofing Solar Reflective Finish, provides the standard
solar reflective coating, however where design considerations
dictate, colour finishes are available.
Note: Attention is drawn to HSG 33 published by the Health
and Safety Executive, which classifies many pitched roofs
of this type as fragile. This means that additional elements
concerning health and safety may need to be considered.
For further details and downloadable specification go to:
NBS Plus - Section J31- Liquid Applied Waterproof Roof
Reference - 110 Cold Applied Roof Coverings.
Hyflex 10 Profile
Product details
Standard Specification
• Hyvodex Primer @ 6.5m2
/l
• Hyflex 10 Profile Base Coat @ 1.0m2
/l to laps and fixings
• Hyflex Flexmat to laps and fixings
• Hyflex 10 Profile Base Coat @ 1.0m2
/l
• Hyflex 10 Profile Finish Coat @ 1.0m2
/l
• Hyflex Roofing Solar Reflective Finish 10m2
/l
Hyflex 15
Base Coat
Hyflex 10 Profile
Base Coat
Hyflex Roofing Solar
Reflective Finish
Hyflex 10
Finish Coat
Installation Hyflex 10 Profile
Hyflex 10Profile
Base Coat
Hyflex Primer
Roofing Sheets
Hyflex Flexmat
to Laps and Fixings
Hyflex Membrane
Hyflex 15
Base Coat
ex 15
Hyflex Membrane
Hyvodex Primer
Substrate
Hyflex 10
Base Coat
Hyflex Membrane
Hyflex 10
Base Coat
ex 10
Hyflex Membrane
Hyvodex Primer
Substrate
Exemplar: Roofing
For further information please call:
0121 502 9580
e-mail us
enquiries@hyflex.co.uk
or visit our webpage
www.hyflex.co.uk
flame free waterproofing – providing the solution
Hyflex: Amasco House, 101 Powke Lane, Cradley Heath, West Midlands B64 5PX
Coverings
10. Hyflex 15 has evolved as a result of the
process of continuous product development.
The system utilises constituents of our
traditional bituminous liquid coatings
combined with additional modified coatings,
which provide increased flexibility, strength
and durability.
Compatible with most substrates including
mastic asphalt, built up felt roofing, timber
and concrete. As with all Hyflex systems,
being applied in liquid form it is particularly
suitable for dressing to intricate detail work.
Hyflex 15
Hyflex 15 is a cold applied
liquid roof waterproofing
system based on modified
bitumens giving a
comprehensive 15
year guarantee.
liquid waterproofing systems – providing the solution
• 15 year guarantee
• Seamless
• Light in weight
• Easily maintained
• Suitable for
maintenance traffic
• Cold applied
• AA fire rating
• Long life expectancy
• Single source security
• Revival system available
• Optional colour finishes
• Excellent value for money
• Improved durability
• Multiple substrate
compatibility
Key Features
11. Hyflex 15
Base Coat
Hyflex Membrane
Hyflex 15
Base Coat
Hyflex Roofing Solar
Reflective Finish
Hyflex 15
Finish Coat
Installation Hyflex 15
Hyflex 15
Finish Coat
Hyflex Membrane
Hyvodex Primer
Substrate
Hyflex 10
Base Coat
Hyflex Membrane
Hyflex 10
Base Coat
Hyflex Roofing Solar
Reflective Finish
Hyflex 10
Finish Coat
Installation Hyflex 10
Hyflex Membrane
Hyvodex Primer
Substrate
Hyflex 15
Product details
Application
After preparing the surface, apply by brush or roller to main
areas and by brush to detail areas in the following sequence.
Hyvodex Primer, a low viscosity, solvent based
bituminous primer
Hyflex Base Coat, a bituminous high build liquid coating,
available in both solution (winter) and emulsion (summer)
formulations.
Hyflex Membrane, a 50 gramme bi-component polyester/
polyamide reinforcement membrane, which
because of its thermally welded composition provides
high tensile strength and puncture resistance to the system.
Hyflex Base Coat, a bituminous high build liquid coating,
available in both solution (winter) and emulsion
(summer) formulations.
Hyflex Membrane, a 50 gramme bi-component polyester/
polyamide reinforcement membrane, which
because of its thermally welded composition provides
high tensile strength and puncture resistance to the system.
2 Layers:
Hyflex Finish Coat, a rubber modified liquid bitumen
designed to give maximum elasticity to the weathering layer
and resistance to flexural fatigue. Also available in winter
and summer grades.
Hyflex Roofing Solar Reflective Finish, provides the standard
solar reflective coating, however where design considerations
dictate, colour finishes are available.
For further details and downloadable specification go to:
NBS Plus - Section J31- Liquid Applied Waterproof Roof
Reference - 110 Cold Applied Roof Coverings.
Standard Specification
• Hyvodex Primer @ 6.5m2
/l
• Hyflex 15 Base Coat @ 1.0m2
/l
• Hyflex Membrane
• Hyflex 15 Base Coat @ 1.0m2
/l
• Hyflex Membrane
• Hyflex 15 Finish Coat @ 1.0m2
/l
• Hyflex 15 Finish Coat @ 1.0m2
/l
• Hyflex Roofing Solar Reflective Finish 10m2
/l
For further information please call:
0121 502 9580
e-mail us
enquiries@hyflex.co.uk
or visit our webpage
www.hyflex.co.uk
flame free waterproofing – providing the solution
Hyflex: Amasco House, 101 Powke Lane, Cradley Heath, West Midlands B64 5PX
Coverings
12. liquid waterproofing systems – providing the solution
Exemplar is based on the latest
PMMA [polymethylmethacrylate]
technology, which in essence
provides a lightweight, flexible,
thin but tough, fully bonded totally
waterproof system, which can be
applied to virtually all substrates,
and is suitable for both new build
and refurbishment projects.
Exemplar
Roofing
The complete liquid cold
applied reinforced roof
waterproofing system.
Features and Benefits
• Cold Applied no Flame.
• Quick cure rain proof in 30 mins, walk on in one hour.
• Compatible with all common substrates
no need to strip existing.
• Fully bonded no wind uplift, no flow of water
between membrane and substrate .
• UV resistant resists degradation and maintains
finish and colour.
• Low maintenance cuts service costs.
• Vapour permeable underlying roof structure will
dry out over time.
• Seamless finish no ingress through weak seams,
joints or fixings.
• Root resistant suitable for extensive Green
Roof applications.
• Low temperature application can be applied
in UK winters [-5
o
c]
• Liquid applied the system can be shaped to
complex details.
• Elastomeric the system can cope with unforeseen
movement and cracking.
• Durable the system accommodates maintenance
traffic. {Non slip finishes are available}
• Fire resistant AA rated lower insurance costs.
13. Application
All elements of the system, both primer and waterproofing, are
applied by lambswool rollers after the appropriate preparation of the
surface to be overlaid ie. blisters are cut out and all voids infilled.
Specification
• Exemplar Primer, lay an even layer to the substrate
to improve adhesion.
• Lay an even layer of Exemplar R over the surface to
be waterproofed 2.0 kg/m2
is the minimum thickness.
• To the wet resin, lay in 110gm reinforcement membrane,
express any trapped air by pushing out with the roller.
• Make the second application of Exemplar R wet on wet,
ensuring that the reinforcement membrane is totally
saturated 1.3 kg/m2
minimum thickness.
• Options include colour and / or anti-skid surfacing.
For further details and downloadable specification go to:
NBS Plus - Section J31- Liquid Applied Waterproof Roof Coverings
Reference - 110 Cold Applied Roof Coverings.
Exemplar Roofing
Product details
For further information please call:
0121 502 9580
e-mail us
enquiries@hyflex.co.uk
or visit our webpage
www.hyflex.co.uk
flame free waterproofing – providing the solution
Hyflex: Amasco House, 101 Powke Lane, Cradley Heath, West Midlands B64 5PX
14. liquid waterproofing systems – providing the solution
The Exemplar range of products based on
the latest PMMA [polymethylmethacrylate]
technology provides us with a tough,
lightweight, fully bonded system which
can be bonded to most existing substrates
found on balconies and walkways, it is
also suitable for new build.
There are two variants available depending
on whether or not the application is over
occupied premises. Different wearing
finishes are also available depending on the
anticipated level of traffic.
• Cold Applied no Flame.
• Quick cure minimum disruption for residents/
occupants/trading activities.
• Compatible with all common substrates
no need to strip existing.
• Fully bonded no possibility of wind uplift.
• Durable wearing finishes long life, easy to clean,
cuts maintenance cost, chemical resistant.
• Seamless finish no ingress through weak seams,
joints or fixings.
• Low temperature application can be applied
in UK winters [-5
o
c]
• Liquid applied can be applied to awkward
shapes and penetrations.
• Elastomeric the system can cope with
unforeseen movement and cracking.
• 4mm thickness generally means that existing
details do not have to be changed i.e. Thresholds.
• Variety of colour finishes available increases
design possibilities effecting safety and attractiveness
for users and occupants.
Exemplar for
Balconies
and Walkways
The heavy duty cold applied
reinforced waterproofing and
surfacing system for balconies,
walkways, ramps and terraces.
Features and Benefits
15. Application
All elements of the system are applied by lambswool roller and
trowel. Existing surfaces must be properly prepared, existing
finishes must be removed by grinding, surfaces must also be free
of all contaminants, and should be clean and dry. Cut and seal any
blisters and infill all indentations and voids.
Specification
Variant 1 Un-reinforced. (PMMA)
• Exemplar Primer @ 0.4kg/m2
• Exemplar Deck Shield @ 4.0kg/m2
• Exemplar Crystal Quartz @7kg/m2
• Exemplar Sealer @ 0.5kg/m2
Variant 2 Reinforced. (Polyester and PMMA)
• Exemplar Primer @ 0.4kg/m2
• Exemplar RD @ 1.5kg/m2
• Exemplar 110g Reinforcement.
• Exemplar RD @ 1.0kg/m2
Wearing Layer:
• Exemplar RD @ 1.5kg/m2
• Exemplar Crystal Quartz @7kg/m2
• Exemplar Sealer @ 0.5kg/m2
For further details and downloadable specification go to:
NBS Plus - Section J31- Liquid Applied Waterproof Roof Coverings
Reference - 110 Cold Applied Roof Coverings.
Exemplar for Balconies and Walkways
Product details
EXEMPLAR: Balconies Walkways
Variant 1
Exemplar Sealer
Exemplar Quartz
Exemplar
Deck Shield
Exemplar Primer
Substrate
EXEMPLAR : Balconies Walkways
over occupied premises Variant 2
Exemplar Sealer
Exemplar Quartz
Exemplar RD
Exemplar 110g
Reinforcement
Exemplar RD 1.5g
Exemplar Primer
Substrate
Exemplar RD
For further information please call:
0121 502 9580
e-mail us
enquiries@hyflex.co.uk
or visit our webpage
www.hyflex.co.uk
flame free waterproofing – providing the solution
Hyflex: Amasco House, 101 Powke Lane, Cradley Heath, West Midlands B64 5PX
16. liquid waterproofing systems – providing the solution
The national cold applied
waterproofing specialist
Glasgow
St Mungo Street
Bishopbriggs
Glasgow
G64 1JF
Tel: 0141 772 3229
Fax: 0141 762 2215
Newcastle
Amasco House
1 Garwood Street
South Shields
Tyne Wear NE33 5AG
Tel: 0191 427 2785
Fax: 0191 427 2786
Leeds
Aberford Road
Woodlesford
Leeds LS26 8LG
Tel: 0113 282 2943
Fax: 0113 282 0800
Manchester
Richmond Road
Trafford Park
Manchester M17 1RE
Tel: 0161 877 1940
Fax: 0161 877 1930
Birmingham
Amasco House
101 Powke Lane
Cradley Heath
West Midlands
B64 5PX
Tel: 0121 502 9580
Fax: 0121 502 9581
Cheltenham
Unit R2, Kingsville Road
Kingsditch Industrial Estate
Cheltenham
Gloucestershire
GL51 9NZ
Tel: 01242 227654
Fax: 01242 263038
London
Unit 6
New England Industrial Estate
Gascoigne Road
Barking
Essex IG11 7NZ
Tel: 020 8911 3719
Fax: 020 8911 3718
Hyflex Head Office: Amasco House, 101 Powke Lane, Cradley Heath, West Midlands B64 5PX
Tel: 0121 502 9580 Fax: 0121 502 9581 Email: enquiries@hyflex.co.uk www.hyflex.co.uk
The National Service
European Liquid
Waterproofing Association
Hyflex10Plus
IncorporatingHyflexBaseSheetcoldappliedforapplicationovercompressiblesubstrates
Hyflex10Profile
Thecoldappliedwaterproofingsystemforpitchedandprofiledroofs
ExemplarRoofing
Thecompleteliquidcoldappliedreinforcedroofwaterproofingsystem
ExemplarforBalconiesandWalkways
Theheavydutycoldappliedreinforcedwaterproofingandsurfacingsystemforbalconies,walkways,rampsandterraces
Hyflex10
Thecoldappliedhighperformancespecification
LIquidAppliedWaterproofing
TheSystems
Hyflex15
Thecoldappliedtopoftherangespecification