This document describes HTA series silicone coated wire wound resistors. Key details include:
- Resistors have flame retardant silicone coating, come in power ratings from 0.75W to 12W, and tolerances as close as 1%.
- They have applications in industrial, electrical, and electronic equipment and can operate at temperatures up to 350°C.
- The resistors meet various standards including JSS-50402 and IEC and are tested for characteristics like temperature cycling, voltage proof, and mechanical robustness.
Farady produces neutral grounding resistors for 6-35kV AC networks. The resistors are installed in stainless steel cabinets and include an earthing transformer, resistor, and monitoring equipment. They limit fault overvoltage to within 2.6 times the phase voltage and improve relay protection. Standard models are available from 6-35kV with resistance values from 6-36 ohms and short time current ratings from 100-2000 amps. The cabinets have compact designs for easy installation and include high quality transformers and chromium alloy resistors.
This document provides information on HTR's VHIA series of silicone coated wire wound resistors. Key details include:
- Resistors range in power rating from 0.5W to 20W and resistance from R01 to 120K ohms.
- They have a flame retardant silicone coating and meet UL safety standards.
- Dimensions, resistance ranges, tolerances, and electrical specifications are provided for each type in the series.
- Graphs show temperature rise and pulse capability characteristics for select resistor types.
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...Creativity Please
This document provides specifications for HTR's OF series of open frame, monolithic construction, current sense/low ohm resistors. It includes details on physical dimensions, power ratings from 1W to 10W, resistance values from R001 to R10, and temperature coefficient ratings. The document describes the different mounting tag configurations and provides application notes on selecting the appropriate tag based on resistance value and current requirements. It also includes electrical, environmental, and mechanical performance specifications for the resistors.
Converting from one signal type to another is a common challenge in process control. When the application calls for conversion from an electrical signal, current or voltage, to a pneumatic signal (pressure), this calls for an I/P or E/P transducer.
The Model PK200 Current-to-Pneumatic Converter:
- Converts a 4-20mA or 10-50mA input current signal to a proportional pneumatic output signal.
- Has adjustable zero and span settings, high accuracy and reliability, and is minimally affected by environmental conditions.
- Is used to actuate pneumatic devices like valves and cylinders, as well as for signal conversion in hybrid instrumentation systems.
This document describes HTA series silicone coated wire wound resistors. Key details include:
- Resistors have flame retardant silicone coating, come in power ratings from 0.75W to 12W, and tolerances as close as 1%.
- They have applications in industrial, electrical, and electronic equipment and can operate at temperatures up to 350°C.
- The resistors meet various standards including JSS-50402 and IEC and are tested for characteristics like temperature cycling, voltage proof, and mechanical robustness.
Farady produces neutral grounding resistors for 6-35kV AC networks. The resistors are installed in stainless steel cabinets and include an earthing transformer, resistor, and monitoring equipment. They limit fault overvoltage to within 2.6 times the phase voltage and improve relay protection. Standard models are available from 6-35kV with resistance values from 6-36 ohms and short time current ratings from 100-2000 amps. The cabinets have compact designs for easy installation and include high quality transformers and chromium alloy resistors.
This document provides information on HTR's VHIA series of silicone coated wire wound resistors. Key details include:
- Resistors range in power rating from 0.5W to 20W and resistance from R01 to 120K ohms.
- They have a flame retardant silicone coating and meet UL safety standards.
- Dimensions, resistance ranges, tolerances, and electrical specifications are provided for each type in the series.
- Graphs show temperature rise and pulse capability characteristics for select resistor types.
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...Creativity Please
This document provides specifications for HTR's OF series of open frame, monolithic construction, current sense/low ohm resistors. It includes details on physical dimensions, power ratings from 1W to 10W, resistance values from R001 to R10, and temperature coefficient ratings. The document describes the different mounting tag configurations and provides application notes on selecting the appropriate tag based on resistance value and current requirements. It also includes electrical, environmental, and mechanical performance specifications for the resistors.
Converting from one signal type to another is a common challenge in process control. When the application calls for conversion from an electrical signal, current or voltage, to a pneumatic signal (pressure), this calls for an I/P or E/P transducer.
The Model PK200 Current-to-Pneumatic Converter:
- Converts a 4-20mA or 10-50mA input current signal to a proportional pneumatic output signal.
- Has adjustable zero and span settings, high accuracy and reliability, and is minimally affected by environmental conditions.
- Is used to actuate pneumatic devices like valves and cylinders, as well as for signal conversion in hybrid instrumentation systems.
This document discusses meter test switches, including their specifications, configurations, and accessories according to ANSI C12.9 standards. It provides information on test switch layouts, materials, and sizing. Current transformer testing is described as dangerous if safety procedures are not followed, such as using test switches to avoid opening the secondary circuit. Test plugs and safety covers are recommended accessories for safe current transformer testing.
John Greenewald and TESCO have been involved in several AMI pilot programs and meter certification projects over the past several years. TESCO has provided customized equipment, software, and engineering support to assist with certification testing of new AMI meters and functional testing of received meters. They have also provided meter technicians to assist with various roles throughout AMI deployments.
This document provides an agenda and overview for a 2016 Meter School on test switches and accessories. It discusses test switch specifications, configurations, materials, and safety considerations. The key points are:
- Test switches allow inserting instruments into current transformer circuits safely to test meters, without opening the live secondary circuit.
- Specifications cover ratings, materials, barriers between switches, terminals, and minimum spacings. Configurations vary layout, handle colors, and potentials.
- Accessories include test plugs, safety covers, and isolators to allow testing while maintaining safety.
- Proper use and safety procedures are important as open current transformer circuits can generate high voltages, creating electrical and insulation breakdown hazards.
SOR® is a manufacturer of high-quality pressure and tempreature switches for industrial service. They serve a global market of oil and gas, chemical, petrochemical, and power industries through a network of independent sales representatives. Their products are suitable for a broad range of safety systems, control processes, and related applications.
This document provides product information for Argus Pressure Switches, Isolation Valves, and related pressure control products. It summarizes the products' specifications, certifications, materials, dimensions, and applications. The products conform to various industry standards and are designed for reliable and safe pressure monitoring and control in oil and gas well sites and other industrial processes.
Rotork YTC YT-2501 Smart Positioner Manual | YTC INDIAYTC INDIA
Rotork YTC YT-2501 Smart positioner supplies remote functions and higher liabilities in high temperature and vibration environment. YT-2501 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4-20mA, which is being input from the controller. In addition, built-in micro-processing operator optimizes the positioner's performance and provides unique functions such as Auto calibration, PID control, Alarm, and Hart protocol.
Rotork YTC Smart Positioner, Electro Pneumatic Positioner, Volume Booster, Lock Up Valve, Solenoid Valve, Position Transmitter, I/P Converter Distributors, Suppliers, Traders, Wholesalers India
For any Enquiry Call Us: +91-11-2201-4325, Email at : info@ytcindia.com, Our Website :- www.ytcindia.com
#YTCINDIA #Smartpositioner #YT2501 #Smartvalvepositioner #Industrialequipment
OA - CURRENT SENSE / LOW OHM OPEN FRAME TYPEhtrindia
This document provides specifications for HTR's OA and OP series current sense resistors. The OA series uses an axial design while the OP series is for PCB mounting. Resistance ranges from 0.5 ohms to 10 ohms with power ratings from 0.5W to 5W. Electrical characteristics include temperature coefficient, load life tests, and operating temperature range. Application examples given are power supplies, instruments, and current sensing circuits. Ordering information includes series, type, packaging and resistance value/tolerance.
Rugged, NEMA 4X, epoxy coated enclosure
SPDT or DPDT switch output
Easy access wiring
Single switch output
Internal reference scale and adjustable deadband available
Adjustable ranges: ◦30 "Hg Vac to 5000 psi
• 1 bar Vac to 344 bar
• 0.2 "wcd to 500 psid
• 0,5 mbar d to 34,5 bar d
• -180 to 650 ºF
• -117 to 340ºC
Approvals: UL, CSA, CE, TUV
The document describes an open frame, monolithic shunt resistor product line from HTR India. It provides specifications for 34 different resistor models ranging from 1W to 10W power ratings and resistance values from R001 to R10 ohms. Dimensions, weight, and technical specifications are given for each model. The document also provides application notes on selecting the appropriate resistor model and mounting configuration as well as ordering and packaging information.
The Industry-leading electrical power distribution systems. Explore Messung Wöhner track busbar. Our Industrial-grade power distribution reduces downtime.
The document provides an overview of Siemens' miniature circuit breaker product range, including standard, high-capacity, universal current, high current, and power supply company product lines. It lists the technical specifications for each product line, including rated currents and voltages, tripping characteristics, terminals, approvals, and more. The benefits of the circuit breakers include high rated breaking capacity, excellent current limitation, different tripping characteristics, safety-compliant terminals, uniform additional components, and fast installation. The circuit breakers are designed to protect electrical equipment from overheating and leakage currents.
The DET4 series are 4-terminal earth/ground resistance and soil resistivity testers that can perform 2, 3, and 4 point testing as well as stakeless and attached rod technique testing. They have measurement ranges from 0.01 to 200,000 ohms and include test leads, stakes, batteries, and a carry case. Models vary in their battery type (rechargeable or dry-cell), measurement range, and additional capabilities like selectable test frequencies and attached rod/stakeless testing. The devices are designed for durability and ease of use in outdoor environments.
This document provides specifications for HTR's CURRENT SENSE / LOW OHM OPEN FRAME TYPE MONOLITHIC shunt resistors. It lists over 30 models varying in power rating from 1W to 10W, dimensions, resistance values from R001 to R10, weight, and other details. The document describes the physical configuration, electrical and environmental characteristics, and provides application notes and ordering information.
The document provides information on various monitoring devices from Siemens, including:
- Fault signaling units that monitor industrial plants and control systems and indicate faults.
- Dusk switches that control lighting installations for energy savings based on daylight levels.
- Temperature controllers, fuse monitors, voltage and current relays, insulation monitors and other devices that monitor various electrical parameters.
Technical specifications, usage, standards, and ordering information are provided for each type of monitoring device.
Ls catalog thiet bi dien vcs ls medium voltage-vacuum contactor_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
1) Pragati Electricals Pvt. Ltd. was established in 1975 and manufactures instrument transformers up to 132kV in two factories in India.
2) The document is a certificate verifying that Pragati Electricals' quality system is in compliance with ISO 9001:2000 standards for the design, development, and manufacture of instrument transformers for industrial applications.
3) The certificate includes the scope of registration and applies to goods and services provided from Pragati's specified addresses.
Ashcroft Pressure Gauges - Air Conditioning, Heating & Refridgeration Industr...Thorne & Derrick UK
This document provides information on instrumentation products from Ashcroft for the air conditioning, heating and refrigeration industries. It describes their line of pressure gauges, switches, transmitters and temperature instruments. It highlights that their products are designed to meet the stringent demands of these industries and provide accurate measurements with features like the PowerFlex movement, FlutterGuard and True Zero indication. It also provides specifications and details on various models.
HTA - WIRE WOUND RESISTORS SILICONE COATED TYPE (OLD)htrindia
This document provides information on HTA series silicone coated wire wound resistors. Key details include:
- Resistors have a flame retardant silicone coating, ceramic core, and resistance wire wound to specific parameters.
- Power ratings range from 0.75W to 12W, tolerances as close as 1%, and TCR as low as ±20ppm/°C.
- Resistors meet various industry standards and are available in different configurations including bulk, taped, preformed leads, and pulse-rated types.
- Intended for industrial, electrical, and electronic applications where large power dissipation and elevated operating temperatures are required.
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors have a ceramic core, flame retardant silicone coating, and all welded cap and lead assembly.
- Power ratings range from 0.5W to 20W, with tolerances as close as 0.25% and resistance values from 0.1 ohm to 120 kilohms.
- Special non-inductive and pulse resistant types are available. Resistors can be supplied in bulk, taped, or on reels.
- The resistors have applications in industrial, electrical, electronic, and telecommunications equipment requiring precision and high power dissipation.
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors range from 0.5W to 20W and have tolerances as close as 0.25%. Resistance values range from R01 to 120K.
- Ceramic cores provide high thermal conductivity. Housings have flame retardant thermocoat and all welded caps and leads.
- Non-inductive winding and pulse capability versions are available. Resistors can withstand temperatures up to 275°C.
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors range from 0.5W to 20W and have tolerances as close as 0.25%. Resistance values range from R01 to 120K.
- Ceramic cores provide high thermal conductivity. Housings have flame retardant thermocoat and all welded caps and leads.
- Non-inductive winding and pulse capability versions are available. Resistors can withstand temperatures up to 275°C.
This document discusses meter test switches, including their specifications, configurations, and accessories according to ANSI C12.9 standards. It provides information on test switch layouts, materials, and sizing. Current transformer testing is described as dangerous if safety procedures are not followed, such as using test switches to avoid opening the secondary circuit. Test plugs and safety covers are recommended accessories for safe current transformer testing.
John Greenewald and TESCO have been involved in several AMI pilot programs and meter certification projects over the past several years. TESCO has provided customized equipment, software, and engineering support to assist with certification testing of new AMI meters and functional testing of received meters. They have also provided meter technicians to assist with various roles throughout AMI deployments.
This document provides an agenda and overview for a 2016 Meter School on test switches and accessories. It discusses test switch specifications, configurations, materials, and safety considerations. The key points are:
- Test switches allow inserting instruments into current transformer circuits safely to test meters, without opening the live secondary circuit.
- Specifications cover ratings, materials, barriers between switches, terminals, and minimum spacings. Configurations vary layout, handle colors, and potentials.
- Accessories include test plugs, safety covers, and isolators to allow testing while maintaining safety.
- Proper use and safety procedures are important as open current transformer circuits can generate high voltages, creating electrical and insulation breakdown hazards.
SOR® is a manufacturer of high-quality pressure and tempreature switches for industrial service. They serve a global market of oil and gas, chemical, petrochemical, and power industries through a network of independent sales representatives. Their products are suitable for a broad range of safety systems, control processes, and related applications.
This document provides product information for Argus Pressure Switches, Isolation Valves, and related pressure control products. It summarizes the products' specifications, certifications, materials, dimensions, and applications. The products conform to various industry standards and are designed for reliable and safe pressure monitoring and control in oil and gas well sites and other industrial processes.
Rotork YTC YT-2501 Smart Positioner Manual | YTC INDIAYTC INDIA
Rotork YTC YT-2501 Smart positioner supplies remote functions and higher liabilities in high temperature and vibration environment. YT-2501 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4-20mA, which is being input from the controller. In addition, built-in micro-processing operator optimizes the positioner's performance and provides unique functions such as Auto calibration, PID control, Alarm, and Hart protocol.
Rotork YTC Smart Positioner, Electro Pneumatic Positioner, Volume Booster, Lock Up Valve, Solenoid Valve, Position Transmitter, I/P Converter Distributors, Suppliers, Traders, Wholesalers India
For any Enquiry Call Us: +91-11-2201-4325, Email at : info@ytcindia.com, Our Website :- www.ytcindia.com
#YTCINDIA #Smartpositioner #YT2501 #Smartvalvepositioner #Industrialequipment
OA - CURRENT SENSE / LOW OHM OPEN FRAME TYPEhtrindia
This document provides specifications for HTR's OA and OP series current sense resistors. The OA series uses an axial design while the OP series is for PCB mounting. Resistance ranges from 0.5 ohms to 10 ohms with power ratings from 0.5W to 5W. Electrical characteristics include temperature coefficient, load life tests, and operating temperature range. Application examples given are power supplies, instruments, and current sensing circuits. Ordering information includes series, type, packaging and resistance value/tolerance.
Rugged, NEMA 4X, epoxy coated enclosure
SPDT or DPDT switch output
Easy access wiring
Single switch output
Internal reference scale and adjustable deadband available
Adjustable ranges: ◦30 "Hg Vac to 5000 psi
• 1 bar Vac to 344 bar
• 0.2 "wcd to 500 psid
• 0,5 mbar d to 34,5 bar d
• -180 to 650 ºF
• -117 to 340ºC
Approvals: UL, CSA, CE, TUV
The document describes an open frame, monolithic shunt resistor product line from HTR India. It provides specifications for 34 different resistor models ranging from 1W to 10W power ratings and resistance values from R001 to R10 ohms. Dimensions, weight, and technical specifications are given for each model. The document also provides application notes on selecting the appropriate resistor model and mounting configuration as well as ordering and packaging information.
The Industry-leading electrical power distribution systems. Explore Messung Wöhner track busbar. Our Industrial-grade power distribution reduces downtime.
The document provides an overview of Siemens' miniature circuit breaker product range, including standard, high-capacity, universal current, high current, and power supply company product lines. It lists the technical specifications for each product line, including rated currents and voltages, tripping characteristics, terminals, approvals, and more. The benefits of the circuit breakers include high rated breaking capacity, excellent current limitation, different tripping characteristics, safety-compliant terminals, uniform additional components, and fast installation. The circuit breakers are designed to protect electrical equipment from overheating and leakage currents.
The DET4 series are 4-terminal earth/ground resistance and soil resistivity testers that can perform 2, 3, and 4 point testing as well as stakeless and attached rod technique testing. They have measurement ranges from 0.01 to 200,000 ohms and include test leads, stakes, batteries, and a carry case. Models vary in their battery type (rechargeable or dry-cell), measurement range, and additional capabilities like selectable test frequencies and attached rod/stakeless testing. The devices are designed for durability and ease of use in outdoor environments.
This document provides specifications for HTR's CURRENT SENSE / LOW OHM OPEN FRAME TYPE MONOLITHIC shunt resistors. It lists over 30 models varying in power rating from 1W to 10W, dimensions, resistance values from R001 to R10, weight, and other details. The document describes the physical configuration, electrical and environmental characteristics, and provides application notes and ordering information.
The document provides information on various monitoring devices from Siemens, including:
- Fault signaling units that monitor industrial plants and control systems and indicate faults.
- Dusk switches that control lighting installations for energy savings based on daylight levels.
- Temperature controllers, fuse monitors, voltage and current relays, insulation monitors and other devices that monitor various electrical parameters.
Technical specifications, usage, standards, and ordering information are provided for each type of monitoring device.
Ls catalog thiet bi dien vcs ls medium voltage-vacuum contactor_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
1) Pragati Electricals Pvt. Ltd. was established in 1975 and manufactures instrument transformers up to 132kV in two factories in India.
2) The document is a certificate verifying that Pragati Electricals' quality system is in compliance with ISO 9001:2000 standards for the design, development, and manufacture of instrument transformers for industrial applications.
3) The certificate includes the scope of registration and applies to goods and services provided from Pragati's specified addresses.
Ashcroft Pressure Gauges - Air Conditioning, Heating & Refridgeration Industr...Thorne & Derrick UK
This document provides information on instrumentation products from Ashcroft for the air conditioning, heating and refrigeration industries. It describes their line of pressure gauges, switches, transmitters and temperature instruments. It highlights that their products are designed to meet the stringent demands of these industries and provide accurate measurements with features like the PowerFlex movement, FlutterGuard and True Zero indication. It also provides specifications and details on various models.
HTA - WIRE WOUND RESISTORS SILICONE COATED TYPE (OLD)htrindia
This document provides information on HTA series silicone coated wire wound resistors. Key details include:
- Resistors have a flame retardant silicone coating, ceramic core, and resistance wire wound to specific parameters.
- Power ratings range from 0.75W to 12W, tolerances as close as 1%, and TCR as low as ±20ppm/°C.
- Resistors meet various industry standards and are available in different configurations including bulk, taped, preformed leads, and pulse-rated types.
- Intended for industrial, electrical, and electronic applications where large power dissipation and elevated operating temperatures are required.
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors have a ceramic core, flame retardant silicone coating, and all welded cap and lead assembly.
- Power ratings range from 0.5W to 20W, with tolerances as close as 0.25% and resistance values from 0.1 ohm to 120 kilohms.
- Special non-inductive and pulse resistant types are available. Resistors can be supplied in bulk, taped, or on reels.
- The resistors have applications in industrial, electrical, electronic, and telecommunications equipment requiring precision and high power dissipation.
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors range from 0.5W to 20W and have tolerances as close as 0.25%. Resistance values range from R01 to 120K.
- Ceramic cores provide high thermal conductivity. Housings have flame retardant thermocoat and all welded caps and leads.
- Non-inductive winding and pulse capability versions are available. Resistors can withstand temperatures up to 275°C.
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors range from 0.5W to 20W and have tolerances as close as 0.25%. Resistance values range from R01 to 120K.
- Ceramic cores provide high thermal conductivity. Housings have flame retardant thermocoat and all welded caps and leads.
- Non-inductive winding and pulse capability versions are available. Resistors can withstand temperatures up to 275°C.
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors range from 0.5W to 20W and have tolerances as close as 0.25%. Resistance values range from R01 to 120K.
- Ceramic cores provide high thermal conductivity. Housings have flame retardant thermocoat and all welded caps and leads.
- Non-inductive winding and pulse capability versions are available. Resistors can be supplied in bulk, taped, or on reels.
- Precise specifications are given for electrical, environmental, mechanical, and ordering information. Intended for industrial applications where large power dissipation
This document describes wire wound resistors that have several key features:
- A ceramic core with a silicone coating for flame retardancy and high thermal conductivity.
- Resistance values from 0.5W to 20W that can have tolerances as close as 0.25% and TCR as low as 20ppm/°C.
- They are suitable for industrial and professional applications requiring precision power resistors that can operate at high ambient temperatures.
This document provides information on wire wound resistors of the HIA series, including their specifications, characteristics, applications, and ordering information. Key details include:
- The resistors have a silicone/flame retardant coating, power ratings from 0.5W to 25W, resistance values from 0.1 ohm to 150k ohm, and tolerances as close as 0.25%.
- They have characteristics like low temperature coefficients, surge capability, high voltage resistance, and mechanical robustness.
- Typical applications are in industrial equipment, power supplies, and frequencies up to 50kHz. Ordering requires specifying series, type, packing, resistance value, and tolerance.
The document summarizes the specifications of HTR's compact wire wound resistors. It describes the physical construction including a ceramic core with alloy resistance wire wound to specific parameters and fully welded. It is rated from 1W to 5W and tolerances as close as 1%. Dimensions and resistance ranges are provided for each type. It discusses electrical characteristics including temperature rise curves. Environmental specifications include high temperature operation and resistance to shock, vibration, soldering heat and more. Pulse capability curves are shown. Ordering information includes options for RoHS, non-inductive winding, impulse type and taping.
This document summarizes the specifications of HTR's compact wire wound resistors. Key details include:
- Resistance values from 0.5 ohms to 12k ohms, tolerances as tight as 1%, power ratings from 1W to 5W
- Flame retardant silicone/cement coating and tin plated copper terminations
- Construction includes resistance wire wound on a ceramic core with fully welded terminations
- Specifications cover mechanical, electrical, environmental and pulse load performance requirements
This document summarizes compact wire wound resistors that are silicone/cement coated. Key details include:
- Resistor sizes range from 1W to 5W, tolerances as close as 1%, and resistance values from R01 to 12K.
- They have flame retardant coatings compatible with UL standards and TCR as low as 20ppm/°C.
- The resistors have ceramic cores with alloy resistance wire wound to specific parameters and fully welded terminations.
- Electrical data graphs show temperature rise vs power and pulse capability curves. Environmental and mechanical specifications are also provided.
This document provides information on HTR's VHIA series of wire wound resistors. Key details include:
- Resistors range from 0.5W to 20W and have flame retardant silicone coatings.
- Resistance values range from 10 ohms to 120k ohms with tolerances as tight as 1%.
- Resistors can withstand pulses and are qualified to various industry standards.
- Dimensional drawings and electrical/thermal specifications are provided for different models.
This document provides information on HTR's VHIA series of silicone coated wire wound resistors. Key details include:
- Resistors range in power rating from 0.5W to 20W and resistance from R01 to 120K ohms.
- Models have flame retardant and high temperature silicone coatings, with operating temperatures up to 350°C.
- Specifications cover electrical characteristics, mechanical properties, environmental testing and pulse capabilities.
- Configuration options include non-inductive winding, impulse models, taping/reeling, and RoHS compliance.
This document provides information on HTR's VHIA series of wire wound resistors. The resistors are silicone coated and flame retardant. They are available in power ratings from 0.5W to 20W with resistance values from 0.1 ohm to 120k ohm and tolerances as tight as 1%. Dimensions, electrical specifications, and ordering information are provided for selecting the appropriate resistor for an application.
1. The document describes HTR's HSV series of wire wound resistors encased in ceramic housings.
2. The resistors are available in power ratings from 4W to 17W, resistance values from R04 to 82K, and mounting configurations including straight leads, cropped leads, and vertical mounting pillars.
3. The resistors have electrical and mechanical characteristics including tolerance ranges, temperature range, overload ratings, and insulation resistance that make them suitable for applications in power supplies and televisions.
1. The document describes HTR's HSV series of wire wound resistors encased in ceramic housings.
2. The resistors are available in power ratings from 4W to 17W, resistance values from R04 to 82K, and can be mounted vertically or have cropped leads.
3. The resistors have ceramic housings for fire protection and mechanically crimped termination assemblies.
1. The document describes HTR's HSV series of wire wound resistors encased in ceramic housings.
2. The resistors are available in power ratings from 4W to 17W, resistance values from R04 to 82K, and can be mounted vertically or have cropped leads.
3. The resistors have ceramic housings for fire protection and mechanically crimped termination assemblies.
This document describes alloy resistance wire wound surface mount resistors. Key details include:
- Resistors have flame retardant silicone coating and tinned end caps, suitable for reflow soldering.
- Various models and resistance ranges are specified.
- Dimensions, electrical characteristics, and performance test methods/requirements are provided.
- Resistors are qualified for various applications and have high power to size ratios.
- Ordering information includes series type, packing, resistance value, and tolerance.
HCAL - CURRENT SENSE / LOW OHM CERAMIC ENCASED TYPEhtrindia
1. The document describes ceramic encased power resistors that provide very low resistance and negligible inductance for applications requiring current sensing and pulse power.
2. The resistors are available in power ratings from 1W to 20W, resistance values from 0.002 ohms to 20 ohms, and tolerances as tight as ±0.5%.
3. The ceramic encased construction provides high temperature operation from -55C to 275C, as well as protection against moisture, shock, vibration and chemical exposure.
This document provides information on HCAL series ceramic encased power resistors. Key details include:
- They are all-welded construction with tinned copper terminals and ceramic housing for high temperature operation.
- Resistance ranges from 0.002 ohms to 20 ohms with power ratings from 1W to 20W. Custom resistance values are possible.
- They have negligible inductance making them suitable for applications requiring current sensing and pulse operation like power supplies and instrumentation.
- Electrical and environmental specifications include tight tolerance, wide temperature range, high overload capability, and protection from moisture, shock, and vibration.
This document provides information on HCAL series ceramic encased power resistors. Key details include:
- They are all-welded construction with tinned copper terminals and ceramic housing for high temperature operation.
- Resistance ranges from 0.002 ohms to 20 ohms with power ratings from 1W to 20W. Custom resistance values are possible.
- They have negligible inductance making them suitable for applications requiring current sensing and pulse operation like power supplies and instrumentation.
- Electrical and environmental specifications include tight tolerance, wide temperature range, high overload capability, and protection against moisture, shock, and vibration.
Similar to HTA - WIRE WOUND RESISTORS SILICONE COATED TYPE (20)
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-EfficiencyScyllaDB
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
5th LF Energy Power Grid Model Meet-up SlidesDanBrown980551
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3Data Hops
Free A4 downloadable and printable Cyber Security, Social Engineering Safety and security Training Posters . Promote security awareness in the home or workplace. Lock them Out From training providers datahops.com
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Main news related to the CCS TSI 2023 (2023/1695)Jakub Marek
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Dandelion Hashtable: beyond billion requests per second on a commodity serverAntonios Katsarakis
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
A Comprehensive Guide to DeFi Development Services in 2024Intelisync
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
GraphRAG for Life Science to increase LLM accuracy
HTA - WIRE WOUND RESISTORS SILICONE COATED TYPE
1. Fully Welded
Construction
Flame Retardant
Thermocoat
Alloy Resistance Wire wound
To Specific Parameters On
High Thermal Conductivity
Ceramic Core
APPLICABLE STANDARDS
JSS - 50402 [Pattern RFHT - 1], IS - 8909 [Type FRP3]
IEC-Pub 266 and Pub 266 A [Type - 2E].
WIRE WOUND RESISTORS
SILICONE COATED TYPE
HTA
SERIES
HIGH SURFACE TEMPERATURE
Power Silicone“Thermo Coat”
Wire Wound Resistors
Industrial / Professional Applications
• Axial Termination
• Flame retardant coating compatible
with UL standards
• 0.75 W to 12 W
• Tolerances as close as 1%
•TCR as low as ± 20ppm / °C [on request]
• Pulse types available as per IEC-61000-4-5
• R01 to 100K
e : info@htr-india.com
www.htr-india.com
Rev Date : 22/11/2016
Asper AEC-Q200
2. H-1BA 0.75W 9.0 3.5 0.8 38 30 R01 2K2 0.6
H-2BA 2.5W 13.0 5.5 0.8 38 35 R01 10K 1.1
H-6A 6W 23.0 8.0 0.8 38 45 R01 33K 2.9
H-9A 9W 39.0 8.0 0.8 38 60 R05 68K 3.8
H-12A 12W 53.0 8.0 0.8 38 75 R05 100K 5.8
HTR
TYPE
POWER
RATING
at 70°C
L
(max)
D
(max)
DIMENSIONS (mm) RESISTANCE RANGE TYPICAL
WEIGHT
PER PC
(gms)
min max
d
+0.08
-0.05
l
±1.5
*
LM
±1
* For resistance values less than R10 and tolerances less than ±2% please measure resistance over centered length LM.
• Special resistive values available on request.
PHYSICAL CONFIGURATION
(Ambient)
NON INDUCTIVE RESISTORS
Low inductance Aryton - Perry winding type resistors are available in this series. For non-inductive types reduce maximum resistance
values shown to 50% and the continuous working voltage to 70% (please refer to note (2) of ordering information for placing orders).
•
ELECTRICAL CHARACTERISTICS/ DATA
Power Rating (Rated Ambient Temperature) Full power dissipation at upto 70°C and linearly derated down to
zero dissipation at 350°C. [see Derating Curve above]
Resistance Tolerances Available ±10% [K]; ±5% [J]; ±3% [H]; ±2% [G]; ±1% [F]
[Test method no. 13.2 of JSS - 50402 and 50400]
Voltage Rating / Limiting Voltage / Max. Working Voltage V = PxR
Voltage Proof / Dielectric Withstanding Voltage No breakdown or flashover
[applicable to insulated styles only]
[Test No. 13.31 of JSS - 50400]
Insulation Resistance 1000 M [Dry]
[Test No. 13.4 of JSS - 50402 and JSS - 50400]
Short Time Overload Max. ∆R ± (2% + R05)
[Test No. 13.19 of JSS - 50402 and JSS - 50400]
PARAMETER/PERFORMANCE TEST & TEST METHOD PERFORMANCE REQUIREMENTS
PRE-FORMED LEADS
The resistor terminations can be bent and cut as per requirements for quick PCB
mounting. Please send detailed drawings of specific type of preforming required.
Depending on application the resistors leads may be tin plated CopperWeld®
instead
of tin plated copper.
TAPING
Types H-1BA, H-2BA, H-6A, H-9A, H-12A can be supplied in taped form. Please refer
Tape / Ammo pack specifications. Tape / Reel on request. Type H6A, H-9A, H-12A
in taped form will be supplied with tin plated copper clad steel (copper weld®
)
terminations.
Pulse Capability
• Resistors for use under pulse conditions as per IEC - 61000 - 4 - 5 available. For further information please refer to “Pulse / Surge
capability of resistors”.
• In-case a tailor made pulse resistor is required, please refer to “Questionnaire of data required”and provide data accordingly.
• Once power rating and resistance value are established by the design engineer, HTR can provide vital data in the form of charts/graphs
for two important characteristics of the pulse version of these resistors -
1. Pulse on a regular basis ; Max allowable peak pulse power (W) as a function of pulse duration (T).
2. Pulse capability ; Energy (J) as a function of R (Ω).
It is essential that this data must be validated in actual trials and HTR will be pleased to provide the necessary samples for
validation and homologation.
WIRE WOUND
RESISTORS
SILICONE
COATED TYPE
HTA
e : info@htr-india.com
www.htr-india.com
Rev Date : 22/11/2016
3. Series Type Packing Resistance Value Tolerance
HTA H-6A/H6A* Bulk H-6A / H6A* 50R J
Tape & Ammo H6AT / H6A*T
Tape & Reel H6ATR / H6A*TR
ORDERING INFORMATION
1. For RoHS version - H-6A *
2. For Non Inductive type - N H-6A
3. For Pulse type - H-6A I
4. For Tape and Ammo packing - H-6A T
5. For Tape and Reel - H-6A TR
HTA Series is unique due to its special flame proof‘Thermocoat’which resists hot spot temperature of 350°C and uses specially selected
resistance elements and substrates.
These unique features can be effectively used by the circuit designer in all industrial, electrical, electronic and telecommunication
equipment where large power dissipation : size ratio are required and where the ambient operating temperature is elevated without
sacrificing accuracy and reliability.
HTA series when wound by the Aryton-Perry method can be used effectively for high frequency applications, if required.
Note : The words“Applicable standards”do not necessary signify certification to that standard., however the tests mentioned are carried
out on the broad based guidelines set out in these standards.
TYPICAL APPLICATIONS
ENVIRONMENTAL SPECIFICATIONS
PARAMETER/PERFORMANCE TEST & TEST METHOD PERFORMANCE REQUIREMENTS
MECHANICAL SPECIFICATIONS
Pull Test / Robustness of Terminations No mechanical damage
[Force supplied from 2 to 4.5Kgs depending on size]
Solderability ∆R < ± [1% + R05] - Continuous and satisfactory
[Test method no.19 of JSS 50101]
PARAMETER/PERFORMANCE TEST & TEST METHOD PERFORMANCE REQUIREMENTS
Temperature Cycling Max. ∆R ± (2% + R05)
[Test No. 13.14 of JSS - 50402 and JSS - 50400]
Life (Electrical) Max. ∆R ± (<5% + R05)
[Test No. 13.17 of JSS - 50402 and JSS - 50400]
Climatic and Damp Heat Max. ∆R ± (<5%) - No physical damage
[Test No.13.15 and 13.16 of JSS - 50402 & JSS - 50400] [Severity H - 13]
Flammability [Test no. 10 of JSS - 50101] Within the specified limits
Temperature Characteristic of Resistance ±100 to 200 ppm /°C (Can be significantly
[Test No. 13.24 of JSS - 50402 and JSS - 50400] lowered on request)
WIRE WOUND
RESISTORS
SILICONE
COATED TYPE
HTA
e : info@htr-india.com
www.htr-india.com
Rev Date : 22/11/2016