The document discusses Hewlett Packard printer software prompts that occur when using refilled ink cartridges and how to disable some of the prompts. It notes that installing just the printer driver during software installation can limit prompts, and selecting default options on prompts allows printing with refilled cartridges. The document also advises customers that refilled cartridges will show empty ink levels and more prompts than new cartridges, but printing is still possible.
HDXPRT assesses how PCs handle real-world media scenarios while using common consumer applications. It presents results that are relevant and easy to understand. HDXPRT uses mainstream applications to test the performance of the system, and installs trial versions of all required applications during setup.
ATEQ Quickset TPMS Reset Relearn Tool User ManualTim Miller
This is the user manual of the ATEQ Quickset TPMS tool.
>> READ MORE: https://www.obdadvisor.com/best-tpms-tool-review/
Here is a detailed review of the best TPMS tools based on my own experience, including:
- Compatibility
- Features and Functions
- Pros and Cons
Check it out to get the REVIEW and some NOTES about using the tool.
Numéro de l'article SP56
http://www.eobd2.fr/bmw-scanner-140-v-436.html
How to install VCDS 12.12 software?
Step 1. Connect VAG COM 12.12 to your PC and a Found New Hardware Wizard window should pop up:
Step 2. Select "Install from a list or specific location (Advanced)" and click Next.
Step 3. You will get a dialog as shown below:
Step 4. Select "Search for the best driver in these locations", click "Include this location in the search", select the VCDS file under C: Ross-Tech and Click “OK”.
Step 5. Click “Next” in the following window.
Step 6. If it is a clone version, you will get a Windows message saying "This equipment will not be installed. Contact your system administrator ", then you must do the following
1. Log on to Windows with administrator rights.
2. Go to Start -> Settings -> Control Panel -> System -> Hardware -> Driver Signing
3. Select Prevent and select "Prompt me each time to choose an action."
4. Then repeat the driver installation.
Step 7. You will get a diaglog box warns you that we did not pay Microsoft a pound of flesh to certify the driver. Click “Continue Anyway”.
Step 8. Click “Finish” to complete the found new hardware wizard.
HDXPRT assesses how PCs handle real-world media scenarios while using common consumer applications. It presents results that are relevant and easy to understand. HDXPRT uses mainstream applications to test the performance of the system, and installs trial versions of all required applications during setup.
ATEQ Quickset TPMS Reset Relearn Tool User ManualTim Miller
This is the user manual of the ATEQ Quickset TPMS tool.
>> READ MORE: https://www.obdadvisor.com/best-tpms-tool-review/
Here is a detailed review of the best TPMS tools based on my own experience, including:
- Compatibility
- Features and Functions
- Pros and Cons
Check it out to get the REVIEW and some NOTES about using the tool.
Numéro de l'article SP56
http://www.eobd2.fr/bmw-scanner-140-v-436.html
How to install VCDS 12.12 software?
Step 1. Connect VAG COM 12.12 to your PC and a Found New Hardware Wizard window should pop up:
Step 2. Select "Install from a list or specific location (Advanced)" and click Next.
Step 3. You will get a dialog as shown below:
Step 4. Select "Search for the best driver in these locations", click "Include this location in the search", select the VCDS file under C: Ross-Tech and Click “OK”.
Step 5. Click “Next” in the following window.
Step 6. If it is a clone version, you will get a Windows message saying "This equipment will not be installed. Contact your system administrator ", then you must do the following
1. Log on to Windows with administrator rights.
2. Go to Start -> Settings -> Control Panel -> System -> Hardware -> Driver Signing
3. Select Prevent and select "Prompt me each time to choose an action."
4. Then repeat the driver installation.
Step 7. You will get a diaglog box warns you that we did not pay Microsoft a pound of flesh to certify the driver. Click “Continue Anyway”.
Step 8. Click “Finish” to complete the found new hardware wizard.
1. Hewlett Packard Software Prompts
Hewlett Packard software prompts given when printing with refilled cartridges can only be disabled
when installing the printer’s software by installing the print driver only. Refilled cartridges can be used
without issues when all software options are installed but more prompts are given. Selecting the default
on all prompts will allow printing with a refilled cartridge.
Customer education is important to limit returns. Let your customers know that they will see extra
prompts that they would not normally see when installing a new OEM cartridge and that the ink level
prompt will always show empty. Some customers may choose to reinstall their printer’s software using
the driver only option outlined below.
Go to “Control Panel” and select > “Add or Remove Programs” to remove printer software
2. Insert Printer’s Software CD & Install Software: Select > “Advanced Install” then > “Next”
*** unplug the printers USB cable until prompted to connect ***
Printer Software can
be downloaded from
HP’s website if
Printer’s Software CD
has been misplaced.
Windows XP users
have the option of
downloading a
“Basic” Driver only.
Visa and Windows 7
users must download
the full software
version.
Select > No, I prefer to do this myself
3. Select > Custom (for advanced users)*
Uncheck all and Select > Next (Driver Software is required, it cannot be unselected)
*** from this point select defaults and reconnect the USB cable when prompted ***
4. Software prompts examples below are a comparison between “new” and “refilled” cartridges with full
software options installed
New Cartridges
> Select “OK”
Refilled Cartridge
> Select “OK”
5. Refilled Cartridge > Select “OK” (this prompt appears when a refilled cartridge is installed because the
software sees the cartridge ink level as empty; does not appear when a new cartridge is installed)
6. New Cartridge & Refilled
Cartridge > Select
“Alignment”
New Cartridge & Refilled
Cartridge > Select
“Align”
7. New Cartridge & Refilled
Cartridge > Adjust Values
> Select “Done”
New Cartridge & Refilled
Cartridge > Select the
“Check Mark”
8. New Cartridges > “Ink Alert” prompt appears when the a cartridge is near the end of life
> Select “OK” (Dismiss this message)
Refilled Cartridges > “Ink Alert” prompt does not appear when cartridges are near the end of life. Fuel
gauges are always shown as empty when refilled cartridges are installed. If a new cartridge is removed
from the printer for refilling before the “Ink Alert” is given the prompt will appear; the fuel gauges will
resume where they were before the cartridge was filling.
Disclaimer: SME is not affiliated with the Hewlett Packard
or any other OEM. Any HP trademarks or logos belong to
the Hewlett Packard.