This document provides instructions for setting up a tripod in 4 steps: 1) Remove the tripod from its bag and open its legs; 2) Lift the tripod to the desired height and lock its clips or screws; 3) Attach the camera to the tripod's base plate by screwing the plate into the camera's thread; 4) Level the tripod using a spirit level and lock the camera in place.

1. How to set up a tripod
STEP 1
Open the tripod bag
Remove tripod from bag
Put tripod on floor
Open tripod legs so all sections are straight
STEP 2
Open clips on legs or screws if necessary
Lift up tripod to desired height
Lock the clips/screws
Remove camera base plate using red clip
STEP 3
Open the camera bag and remove camera
Get base plate, put screw in camera thread then tighten
STEP 4
Check spirit level
Loosen handle and adjust until level
Check spirit level is accurate
Tighten handle
Push red button and slide in camera locking into place