This document provides instructions for making genuine goldstone earrings using various beads, headpins, and bead caps. The instructions are as follows: 1) Insert copper beads onto a headpin. 2) Bend a bead cap around the headpin. 3) Add more bead caps, a goldstone bead, and additional bead caps. 4) Add a bead cap and copper beads, then bend the cap. 5) Create a loop, trim excess wire, and close the loop to complete one earring. Repeat the steps to make a second earring and attach earwires.

1. How To Make: Genuine Goldstone Earrings

2. Materials: 2 ball headpins – around 3 inches long, 2 sandstone (goldstone) beads – size 10 mm, 4 copper beads – size 4 mm,
4 copper beads – size 3 mm, 2 copper beads – size 2 mm, 8 bead caps – size/diameter 9 mm, 4 bead caps – size/diameter 7 mm,
Pair of earwires

3. Tools: Round Nose Pliers, Wire Cutters

4. Step 1: Insert two copper beads (size 3 mm and 4 mm) onto the headpin

5. Step 2: You need to bend bead cap (size 9 mm) as shown in the photo. The best way to do it is by squeezing it on the headpin

6. Step 3: Insert 2 more bead caps (size 7 mm and 9 mm), a sand stone bead and again bead caps (9 mm and 7 mm)

7. Step 4: Insert 1 bead cap (size 9 mm) and copper beads. Then move those elements up on the headpin in order to bend the bead cap by squeezing in delicately.
Then move it all to the sand stone bead

8. Step 5: Create a loop, trim the pin if you need to and close the shape to create final loop. Repeat all the steps to create second
Earring. Now attach earwires. Your earrings are ready to wear!