1. How to Make:
Calming Twisted Pendant

2. Materials
1.7” Bead Stringing Wire
1 Stone Bead (Size 10mm)
3 Metal Beads (Size 2mm, 3mm, & 4mm)
Wire Cutters
Chain Nose Pliers

3. Step 1:
Take wire and bend it like on the photo, then put the stone bead onto the middle of it.

4. Step 2:
Wrap wire around the bead as shown on the photo.

5. Step 3:
Squeeze your wires together a little bit so that they are almost touching one another.

6. Step 4:
Put copper bead onto both wires, then trim one wire, and put other metal beads onto the wire which is left.

7. Step 5:
Shape the wire in the loop as shown on the photo, trim the wire if you need to.

8. Step 6:
Add chain to the pendant and your necklace is ready to wear!