Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

How to Make Dangle Crackle Pendant DIY Jewelry Making Tutorial


Published on

Learn to make this wonderful pendant necklace that would be a perfect gift or something to match with your own attire!

Published in: Design
  • Be the first to comment

  • Be the first to like this

How to Make Dangle Crackle Pendant DIY Jewelry Making Tutorial

  1. 1. How To Make: Dangle Crackle Pendant
  2. 2. Materials: 8 inches of 20 gauge copper wire, 8 inches of 28 gauge copper wire, cut into 2 pieces - for attaching beads to the pendant, 3 head pins - size around 3 inches long (or shorter), 1 crackle bead - size 12 mm, 3 crackle beads - size 8mm, 4 crackle beads - size 6 mm, 3 glass beads - size 4 mm
  3. 3. Tools: Round Nose Pliers, Wire Cutters
  4. 4. Step 1: Bend wire in the middle to create small drop shape
  5. 5. Step 2: Create two small loops
  6. 6. Step 3: Shape wire around the bead (size 12mm) as shown in the photo
  7. 7. Step 4: Wrap wire around the base wire in order to close the base shape, then trim it
  8. 8. Step 5: Create a hanging loop by shaping it with your pliers. You can also wrap the ending of wire around the base of the loop to create closed shape (it depends on the length of the wire you work with)
  9. 9. Step 6: Wrap thin wire around the base, then insert a bead and again wrap wire around the base. Trim wire which is left. Repeat this step with second crackle bead
  10. 10. Step 7: Insert beads onto pin, create the hook shape and put it through the loop as shown in the photo
  11. 11. Step 8: Close the loop by trimming the pin and bending it to the bead in order to create closed loop, or by wrapping it around itself. Repeat this step with the rest of the beads and pins
  12. 12. Step 9: Attach chain to the pendant. Your necklace is ready to wear!