1. How To Make: Pretty Loop Pendant

2. Materials: 10” of 20 Gauge Copper Wire, 1 Glass Bead- Size 12 mm

3. Tools: Round Nose Pliers, Wire Cutters

4. Step 1: Create small loop in the middle of the wire

5. Step 2: Create 4 more loops as shown in the photo. Use your pliers to create them

6. Step 3: Insert your bead onto the wire

7. Step 4: Create 5 small loops, then bend wires as shown in the photo to create tear shape

8. Step 5: Wrap one wire around the other to close the base, then trim wire which is left

9. Step 6: Bend wire as shown in the photo then create hook shape, trim the wire if you need to and close the hook to create final loop

10. Step 7: Squeeze the arms of the pendant to shape it from tear to triangular shape

11. Step 8: Add chain to your pendant. Your necklace is ready to wear!