How to Install the Last Row of Laminate Flooring - Installation Tutorial
- Universal Installation: This tutorial walks you a universal installation of the last row of laminate flooring. It can be used in any type of room including one that may have obstacles, cabinets or tight spaces.
Step 1: Measure the Gap: In most cases, the last row of flooring will need to be cut in order to fit the space. You will need to measure the gap between the last installed plank and the wall. Remember to factor in the expansion gap!
Tip: Measure the gap at each end of the plank to get an accurate measurement. Walls can bow in or out causing a slightly different measurement at the beginning and end of a plank.
Step 2: Expansion Gap: Be sure to exclude the expansion gap in your measurement! .25” for a room under 30 ft. in length, .5” for over 30 ft. in length. Your moldings should cover this gap.
Step 3: Mark your Plank: Once the width of the plank is determined, mark the plank with a pencil according to the cut needed. Use another plank as your straight edge guide.
Tip: If the side of the plank with a locking system is against the wall, you will want to trim the plank so it has a smooth, solid edge butting against the wall.
Step 4: Cut your Plank: Use a saw to cut the plank with the decorative side up. We recommend using a jigsaw or table saw.
Jigsaw: Use a laminate cutting blade, which has a medium tooth, downstroke blade.
Table Saw: Use a medium tooth carbide blade with upside down teeth.
Step 5: Lock in the Plank: Add spacers to the end of the plank. Tilt the plank into the locking system at a 45 degree angle.
Tip: Before installing, check to make sure the plank fits. You may have to cut more of the plank to fit if your previous cut wasn’t as precise.
Step 6: Use a Pull Bar: Use a pull bar along the side of the plank, pushing the plank down and into the locking system securely Do this along the full plank.
Hint: Depending on the locking system, you may need to connect several planks together and install all at one time. The ends may not be able to connect plank by plank.
Step 7: The Next Plank: Repeat steps 1-4 to measure and cut the next plank for installation.
Step 8: Trim the Track: In most cases, it will be hard to lock your plank in two both locking systems. You can trim the track down with a blade or end of the pull bar to prepare for gluing the planks together.
Step 9: Glue the Planks: After the track is trimmed, apply woodworkers glue on the joint. Position the next plank on an angle to connect into the locking system without lowering the edge onto the glue.
Step 10: Tap Together: Use the pull bar on the side of the plank like previously stated. To secure the first and second plank, use a tapping block to connect the ends of the first and second plank in the last row.
Step 11 – Continue Installing: Continue installing the planks until you are at the end of the row. Now you’re ready to install your moldings!
Read this General Laminate Flooring Installation & Tips Guideline that will teach you everything you need to know about laminate flooring and how to install it!
Estudio Manpower de proyección de empleo 1Q14Ximo Salas
El Estudio Manpower de Proyección de Empleo para el primer trimestre de 2014 se ha llevado a cabo entrevistando a una muestra representativa de 1.000 directivos de España. A todos los encuestados se les ha preguntado: “¿Cómo prevé usted que cambiará el empleo en su empresa en el próximo trimestre, hasta finales de marzo de 2014, comparado con el actual?”. Las perspectivas de contratación de los directivos españoles para el primer trimestre de 2014 son débiles. Mientras que un 4% de los directivos anticipa un incremento de sus plantillas, el 10% prevé una reducción de las mismas y el 85% no pronostica cambio alguno, lo que resulta en una Proyección de Empleo Neto de -6%.
How to Install the Last Row of Laminate Flooring - Installation Tutorial
- Universal Installation: This tutorial walks you a universal installation of the last row of laminate flooring. It can be used in any type of room including one that may have obstacles, cabinets or tight spaces.
Step 1: Measure the Gap: In most cases, the last row of flooring will need to be cut in order to fit the space. You will need to measure the gap between the last installed plank and the wall. Remember to factor in the expansion gap!
Tip: Measure the gap at each end of the plank to get an accurate measurement. Walls can bow in or out causing a slightly different measurement at the beginning and end of a plank.
Step 2: Expansion Gap: Be sure to exclude the expansion gap in your measurement! .25” for a room under 30 ft. in length, .5” for over 30 ft. in length. Your moldings should cover this gap.
Step 3: Mark your Plank: Once the width of the plank is determined, mark the plank with a pencil according to the cut needed. Use another plank as your straight edge guide.
Tip: If the side of the plank with a locking system is against the wall, you will want to trim the plank so it has a smooth, solid edge butting against the wall.
Step 4: Cut your Plank: Use a saw to cut the plank with the decorative side up. We recommend using a jigsaw or table saw.
Jigsaw: Use a laminate cutting blade, which has a medium tooth, downstroke blade.
Table Saw: Use a medium tooth carbide blade with upside down teeth.
Step 5: Lock in the Plank: Add spacers to the end of the plank. Tilt the plank into the locking system at a 45 degree angle.
Tip: Before installing, check to make sure the plank fits. You may have to cut more of the plank to fit if your previous cut wasn’t as precise.
Step 6: Use a Pull Bar: Use a pull bar along the side of the plank, pushing the plank down and into the locking system securely Do this along the full plank.
Hint: Depending on the locking system, you may need to connect several planks together and install all at one time. The ends may not be able to connect plank by plank.
Step 7: The Next Plank: Repeat steps 1-4 to measure and cut the next plank for installation.
Step 8: Trim the Track: In most cases, it will be hard to lock your plank in two both locking systems. You can trim the track down with a blade or end of the pull bar to prepare for gluing the planks together.
Step 9: Glue the Planks: After the track is trimmed, apply woodworkers glue on the joint. Position the next plank on an angle to connect into the locking system without lowering the edge onto the glue.
Step 10: Tap Together: Use the pull bar on the side of the plank like previously stated. To secure the first and second plank, use a tapping block to connect the ends of the first and second plank in the last row.
Step 11 – Continue Installing: Continue installing the planks until you are at the end of the row. Now you’re ready to install your moldings!
Read this General Laminate Flooring Installation & Tips Guideline that will teach you everything you need to know about laminate flooring and how to install it!
Estudio Manpower de proyección de empleo 1Q14Ximo Salas
El Estudio Manpower de Proyección de Empleo para el primer trimestre de 2014 se ha llevado a cabo entrevistando a una muestra representativa de 1.000 directivos de España. A todos los encuestados se les ha preguntado: “¿Cómo prevé usted que cambiará el empleo en su empresa en el próximo trimestre, hasta finales de marzo de 2014, comparado con el actual?”. Las perspectivas de contratación de los directivos españoles para el primer trimestre de 2014 son débiles. Mientras que un 4% de los directivos anticipa un incremento de sus plantillas, el 10% prevé una reducción de las mismas y el 85% no pronostica cambio alguno, lo que resulta en una Proyección de Empleo Neto de -6%.
The user manual describes how to install and use the foldable table. The collapsible table is very compact, yet is very easy end fast to open and close.
The folding table is wall mounted, it is only a little bit more than one inch, an innovativate space-saving feature.
The table is a piece of contemporary design furniture made in Italy with lacquered or laminated board and stainless steel structures.
Hanne Vercaemer and Reinout Bevernage created a chair for a handicapped boy, so he can take this chair to other places and sit comfortably.
This is an open source design, feel free to improve it and use it.
Understanding User Needs and Satisfying ThemAggregage
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
VAT Registration Outlined In UAE: Benefits and Requirementsuae taxgpt
Vat Registration is a legal obligation for businesses meeting the threshold requirement, helping companies avoid fines and ramifications. Contact now!
https://viralsocialtrends.com/vat-registration-outlined-in-uae/
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Recruiting in the Digital Age: A Social Media MasterclassLuanWise
In this masterclass, presented at the Global HR Summit on 5th June 2024, Luan Wise explored the essential features of social media platforms that support talent acquisition, including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok.
LA HUG - Video Testimonials with Chynna Morgan - June 2024Lital Barkan
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
Company Valuation webinar series - Tuesday, 4 June 2024FelixPerez547899
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
An introduction to the cryptocurrency investment platform Binance Savings.Any kyc Account
Learn how to use Binance Savings to expand your bitcoin holdings. Discover how to maximize your earnings on one of the most reliable cryptocurrency exchange platforms, as well as how to earn interest on your cryptocurrency holdings and the various savings choices available.
Buy Verified PayPal Account | Buy Google 5 Star Reviewsusawebmarket
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
🟢 Email Access
🟢 Bank Added
🟢 Card Verified
🟢 Full SSN Provided
🟢 Phone Number Access
🟢 Driving License Copy
🟢 Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1(218) 203-5951
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
1. Domain Cabinets Direct
How to assemble a Frameless base cabinet
For some, cabinet assembly may seem to be a bit scary and if you haven’t done it before you will probably
assume that it is very complicated. However, that is not the case. The manufacturers of our cabinets are
well aware of the need to speed up the installation process and, for that reason, have designed our cabinets
to be easy to assemble. After all, no one can install a cabinet until it is assembled. In order to assemble a
cabinet from Domain Cabinets Direct there are three easy steps to read before you start.
1. Set
2. Get the
3. Learn
aside a
work area.
right tools.
the parts of
the cabinet.
Build a test
cabinet to
learn how.
Initial Step1. First be sure you have an adequate work surface. The best surface is elevated such as
a workbench. However, many choose to assemble their cabinets on the garage floor or in an area near the
place that the cabinets are to be assembled. Wherever you choose, be sure that the work surface is covered
with a non-marring material, such as an inexpensive piece of carpet or carpet remnant.
Initial Step2. The second step is to be sure that you have the right tools. You will need,
a)
b)
c)
d)
e)
f)
g)
a #2 flat and Philips screw driver
a cordless screwdriver (drill motor) and bit tip holder and # 2 Phillips tips.
a few clean shop rags
good fitting gloves
safety glasses
a tape measure
and a bottle of carpenter’s glue
That’s pretty much it. (Print and take this list with you to the hardware store). Lastly, it might be helpful to
get an extra pair of hands to hold an edge or to hand you a tool. We recommend someone you get along
with!
Initial Step 3. The third is to be familiar with all the cabinet parts. We recommend that you start
building with a simple and small wall cabinet then move to a base cabinet. There is a very quick learning
curve to building a cabinet, and if you start small you will learn the basics before going on to tackle
drawers. Additionally, it is better to build one very slowly until you get good at it. So, if you have already
built a few wall cabinets you are ready to move forward.
Frameless Base Cabinet
1 of 4
2. A typical base cabinet takes a pro- about 15- 45 minutes, depending on the number of drawers, to unpack
and assemble. Frameless cabinets assemble much the same as framed cabinets however, with a frameless
cabinet you begin with the sides and not the face frame. If it is your first one, take a little more time to
assemble it and make the first one a pleasant and calm experience. We recommend that you start with a
small cabinet to get familiar with the process.
Step1. Gloves and safety glasses on.
Box cutters can damage
the wood.
Lay out your tools near to you (fig 1).
Step 2. Open the box, if you use a box cutter be
Be sure to work on a
non-marring surface so
you won’t scratch your
cabinet.
careful not to cut into the cabinet.
Step 3. Lay out the side that will hold the door onto the non-marring work
surface, this may change due to swing-out left or swing-out right (fig 2).
(fig 2)
Do not over
tighten screws!
Lay out the materials
Step 4.
Set the drawer guide and the hinges (fig 2a, fig 2b, and fig 2c).
Set the drawer guide onto side 2 (fig 2d).
(fig 2a)
(fig 2b)
(fig 2c)
(fig 2d)
Set internal hardware
Step 5. Attach the toe kick to side 1 (fig 2 e). Then attach side 2 onto toe kick (fig 2f).
(fig 2e)
(fig 2f)
Attach both sides to the toe kick
Frameless Base Cabinet
2 of 4
3. Step 6. Preset all screws into side 2 (fig 2g). Screw both front internal supports into side 2
and into side 1(fig 2h).
(fig 2g)
(fig2h)
Set screws into side 2 and attach internal supports
Step 7. Lay the cabinet on its side and slide the cabinet bottom into place (fig I).
Screw both
sides of the cabinet bottom into place (fig 2j and fig 2 k).
(fig 2I)
(fig 2j)
(fig 2k)
Attach cabinet bottom
Step 8. Slide the back into place and apply the internal support/cap (fig 2L and fig 2m).
(fig 2L)
(fig2m)
Attach cabinet back
Step 9.
Set the base aside and start the drawer. Place the drawer’s sides down and
secure them to the drawer back (fig 2n and 2o). Slide the drawer bottom into place (2p).
(fig q)
(fig 2r)
(fig 2s)
Build drawer sides and bottom
Frameless Base Cabinet
3 of 4
4. Step 10. Place the drawer front and then set it with the screws (fig 2t and 2u)
(fig 2t)
(fig 2u)
Attach drawer front
Step 11. Set the door (fig 2v). Set the shelf supports pins ( fig 2w). Set the drawer and
click it into the guides (fig 2x and fig 2Y).
(fig 2v)
(fig 2w)
(fig 2x)
(figY)
Attach finish parts
And that’s it!
Whether you are building a wall cabinet, base cabinet, or pantry the procedure is much
the same. We recommend that you put a few more base cabinets together before moving
onto a lazy Susan or pantry. Remember be safe, slow, and clean! We hope you have a fun
time assembling your RTA cabinets.
Frameless Base Cabinet
4 of 4