This document provides assembly instructions for a base trash can cabinet in 6 steps:
1. Assemble the cabinet base by attaching the side panels, bottom panel, toe kick, and drawer slides.
2. Attach the back panel and reinforcement beams to complete the cabinet base assembly.
3. Assemble the drawer frames by joining the sides, front/back aprons, and bottom (omit bottom for trash can frame).
4. Attach the drawer box segments and fronts to complete the drawers.
5. Attach the trash can to the pull-out trash can frame.
6. Inspect the finished base trash can and add any remaining parts like stoppers.
Camshelving 20th Anniversary - Timeline of Innovative Shelving Solutions for ...Cambro Manufacturing
Cambro Manufacturing is celebrating the 20th Anniversary of one of its most revolutionary products: Camshelving®. When Camshelving was introduced to the foodservice market in 1999, it was extraordinary for two reasons. Not only does it not rust, but its polypropylene shelf plates contained Camguard, an antimicrobial technology that inhibits the growth of mold, fungus and bacteria. Up to this point, foodservice operations largely had metal shelving as their only option. Metal shelving is not only difficult to clean, but it rusts easily, creating potential food safety problems. Cambro sold Camshelving with a “Shelving for Life” goal and promise—and that’s just what it’s become.
Since the inception of Camshelving, several advanced accessories and new products have been created using the same durable materials. Accessories like divider panels and shelf rails keep items organized and safe while being stored on Camshelving. New products like Drying Cradles and Racks, the Flex Station, Ultimate #10 Can Rack, and Ultimate Sheet Pan Rack were all made possible thanks to the initial manufacturing of Camshelving.
Camshelving 20th Anniversary - Timeline of Innovative Shelving Solutions for ...Cambro Manufacturing
Cambro Manufacturing is celebrating the 20th Anniversary of one of its most revolutionary products: Camshelving®. When Camshelving was introduced to the foodservice market in 1999, it was extraordinary for two reasons. Not only does it not rust, but its polypropylene shelf plates contained Camguard, an antimicrobial technology that inhibits the growth of mold, fungus and bacteria. Up to this point, foodservice operations largely had metal shelving as their only option. Metal shelving is not only difficult to clean, but it rusts easily, creating potential food safety problems. Cambro sold Camshelving with a “Shelving for Life” goal and promise—and that’s just what it’s become.
Since the inception of Camshelving, several advanced accessories and new products have been created using the same durable materials. Accessories like divider panels and shelf rails keep items organized and safe while being stored on Camshelving. New products like Drying Cradles and Racks, the Flex Station, Ultimate #10 Can Rack, and Ultimate Sheet Pan Rack were all made possible thanks to the initial manufacturing of Camshelving.
If you love nature and wildlife there is nothing more satisfying than seeing it thrive in your own back garden. By simply providing the right food, shelter and habitat, you can easily attract all kinds of wildlife into your garden for you to enjoy.
Without too much money, time or effort, you can create the perfect location for birds to visit or even settle. With trees and other natural nesting sites being destroyed, providing nest boxes for birds is a great way to encourage them into your garden and give you the opportunity to both see and watch them.
Building your own bird box is both fun and rewarding, an activity the whole family can get involved in with results the whole family can enjoy.
To build your own bird box you will need:
• Hardwood such as oak or beech at least 15mm thick
• 3mm drill bit
• 3.5X38mm galvanised screws
• Pozi drive drill bit
• G clamp
• 25mm flat bit
• Sanding sponge
Now you have all the tools and materials you need, take a look at the infographic below created by UK Oak Doors
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
Elite screens are available from Dukane.
I am an authorized consultant for Dukane
Bill McIntosh
SchoolVision Inc ( my consulting company)
Authorized Dukane/Convey Consultant
Dukane Website : www.Dukaneav.com
Phone :843-442-8888
Email :WKMcIntosh@Comcast.net
Twitter : @OtisTMcIntosh
SchoolVision Website on Facebook: https://www.facebook.com/WKMIII
Elite screens are available from Dukane.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
For more information contact Dukane AV :
Phone: 800-676-2485
Fax: (630) 584-5156
Email: AVSales@Dukane.com
Website: www.Dukane.com/AV
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
Here is a user guide for one of the screens from Elite
Elite screens are available from Dukane.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
For more information contact Dukane AV :
Phone: 800-676-2485
Fax: (630) 584-5156
Email: AVSales@Dukane.com
Website: www.Dukane.com/AV
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
Elite screens are available from Dukane.
I am an authorized consultant for Dukane
Bill McIntosh
SchoolVision Inc ( my consulting company)
Authorized Dukane/Convey Consultant
Dukane Website : www.Dukaneav.com
Phone :843-442-8888
Email :WKMcIntosh@Comcast.net
Twitter : @OtisTMcIntosh
SchoolVision Website on Facebook: https://www.facebook.com/WKMIII
If you love nature and wildlife there is nothing more satisfying than seeing it thrive in your own back garden. By simply providing the right food, shelter and habitat, you can easily attract all kinds of wildlife into your garden for you to enjoy.
Without too much money, time or effort, you can create the perfect location for birds to visit or even settle. With trees and other natural nesting sites being destroyed, providing nest boxes for birds is a great way to encourage them into your garden and give you the opportunity to both see and watch them.
Building your own bird box is both fun and rewarding, an activity the whole family can get involved in with results the whole family can enjoy.
To build your own bird box you will need:
• Hardwood such as oak or beech at least 15mm thick
• 3mm drill bit
• 3.5X38mm galvanised screws
• Pozi drive drill bit
• G clamp
• 25mm flat bit
• Sanding sponge
Now you have all the tools and materials you need, take a look at the infographic below created by UK Oak Doors
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
Elite screens are available from Dukane.
I am an authorized consultant for Dukane
Bill McIntosh
SchoolVision Inc ( my consulting company)
Authorized Dukane/Convey Consultant
Dukane Website : www.Dukaneav.com
Phone :843-442-8888
Email :WKMcIntosh@Comcast.net
Twitter : @OtisTMcIntosh
SchoolVision Website on Facebook: https://www.facebook.com/WKMIII
Elite screens are available from Dukane.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
For more information contact Dukane AV :
Phone: 800-676-2485
Fax: (630) 584-5156
Email: AVSales@Dukane.com
Website: www.Dukane.com/AV
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
Here is a user guide for one of the screens from Elite
Elite screens are available from Dukane.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
For more information contact Dukane AV :
Phone: 800-676-2485
Fax: (630) 584-5156
Email: AVSales@Dukane.com
Website: www.Dukane.com/AV
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
Elite screens are available from Dukane.
I am an authorized consultant for Dukane
Bill McIntosh
SchoolVision Inc ( my consulting company)
Authorized Dukane/Convey Consultant
Dukane Website : www.Dukaneav.com
Phone :843-442-8888
Email :WKMcIntosh@Comcast.net
Twitter : @OtisTMcIntosh
SchoolVision Website on Facebook: https://www.facebook.com/WKMIII
The world of search engine optimization (SEO) is buzzing with discussions after Google confirmed that around 2,500 leaked internal documents related to its Search feature are indeed authentic. The revelation has sparked significant concerns within the SEO community. The leaked documents were initially reported by SEO experts Rand Fishkin and Mike King, igniting widespread analysis and discourse. For More Info:- https://news.arihantwebtech.com/search-disrupted-googles-leaked-documents-rock-the-seo-world/
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
Digital Transformation and IT Strategy Toolkit and TemplatesAurelien Domont, MBA
This Digital Transformation and IT Strategy Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants, after more than 5,000 hours of work. It is considered the world's best & most comprehensive Digital Transformation and IT Strategy Toolkit. It includes all the Frameworks, Best Practices & Templates required to successfully undertake the Digital Transformation of your organization and define a robust IT Strategy.
Editable Toolkit to help you reuse our content: 700 Powerpoint slides | 35 Excel sheets | 84 minutes of Video training
This PowerPoint presentation is only a small preview of our Toolkits. For more details, visit www.domontconsulting.com
Buy Verified PayPal Account | Buy Google 5 Star Reviewsusawebmarket
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
🟢 Email Access
🟢 Bank Added
🟢 Card Verified
🟢 Full SSN Provided
🟢 Phone Number Access
🟢 Driving License Copy
🟢 Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1(218) 203-5951
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
Putting the SPARK into Virtual Training.pptxCynthia Clay
This 60-minute webinar, sponsored by Adobe, was delivered for the Training Mag Network. It explored the five elements of SPARK: Storytelling, Purpose, Action, Relationships, and Kudos. Knowing how to tell a well-structured story is key to building long-term memory. Stating a clear purpose that doesn't take away from the discovery learning process is critical. Ensuring that people move from theory to practical application is imperative. Creating strong social learning is the key to commitment and engagement. Validating and affirming participants' comments is the way to create a positive learning environment.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
Skye Residences | Extended Stay Residences Near Toronto Airportmarketingjdass
Experience unparalleled EXTENDED STAY and comfort at Skye Residences located just minutes from Toronto Airport. Discover sophisticated accommodations tailored for discerning travelers.
Website Link :
https://skyeresidences.com/
https://skyeresidences.com/about-us/
https://skyeresidences.com/gallery/
https://skyeresidences.com/rooms/
https://skyeresidences.com/near-by-attractions/
https://skyeresidences.com/commute/
https://skyeresidences.com/contact/
https://skyeresidences.com/queen-suite-with-sofa-bed/
https://skyeresidences.com/queen-suite-with-sofa-bed-and-balcony/
https://skyeresidences.com/queen-suite-with-sofa-bed-accessible/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-king-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed-accessible/
#Skye Residences Etobicoke, #Skye Residences Near Toronto Airport, #Skye Residences Toronto, #Skye Hotel Toronto, #Skye Hotel Near Toronto Airport, #Hotel Near Toronto Airport, #Near Toronto Airport Accommodation, #Suites Near Toronto Airport, #Etobicoke Suites Near Airport, #Hotel Near Toronto Pearson International Airport, #Toronto Airport Suite Rentals, #Pearson Airport Hotel Suites
What is the TDS Return Filing Due Date for FY 2024-25.pdfseoforlegalpillers
It is crucial for the taxpayers to understand about the TDS Return Filing Due Date, so that they can fulfill your TDS obligations efficiently. Taxpayers can avoid penalties by sticking to the deadlines and by accurate filing of TDS. Timely filing of TDS will make sure about the availability of tax credits. You can also seek the professional guidance of experts like Legal Pillers for timely filing of the TDS Return.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
1. Domain Cabinets Direct
888-US-CABINETS
Domain Cabinets Direct 1 | P a g e
Base Trash Can
Assembly Instructions for 15” and 18” Frameless Base Trash Can Cabinet
BEFORE YOU START
STEP 1: Collect your tools. For this project you will need:
• Phillips head Power Drill
• Nail gun or Staple gun
• Common/Flathead screwdriver
• Rubber mallet
• Wood glue
• Box cutter
STEP 2: Place the box on a sturdy work surface.
STEP 3: Open the box by carefully cutting the tape on the ends of the box. Lift the box from the contents on
one side when cutting along the center seam of tape to avoid damaging the pieces.
STEP 4: Pull back the packaging and carefully lift each piece out of the box, inspecting them for damage. Place
them against a wall.
STEP 5: Remove the box of hardware from the packaging. Separate the types of hardware into small piles and
place them in a plastic box.
PRO TIP: Hardware can get lost, placing it in a box can keep it organized, easy to reach, and prevent small pieces
from getting misplaced.
STEP 6: Locate your model number on the website and click the Packing List link to open a PDF version of the
exploded view Packing List, print. Make sure all parts are accounted for, checking them off the part list.
BEGINNING ASSEMBLY
CABINET BASE
STEP 1: Take the left side (Part A) and lay it flat on your work surface with the interior side facing up.
Left Side
Part A
Right Side
Part A
Pre-drilled holes for
Drawer Glides
2. Domain Cabinets Direct
888-US-CABINETS
Domain Cabinets Direct 2 | P a g e
STEP 2: Locate the Drawer Slides and remove them from any packaging. Fully extend each slide. The furthest
segment of each slide is the Drawer Box Segment. Pressing the black plastic pin of the Drawer Box
Segment upward, pull it from the remaining segments of the Drawer Slide and place it aside for later.
STEP 3: Place the flat side of the remaining Drawer Slide on Part A, aligning it with the pre-
drilled holes ensuring that the slide extends to the front of the cabinet. To get
access to the drill holes, you will need to slide the inner track until the holes are
visible. Using the 12mm Slide Screws, gently screw the drawer slides to Part A.
Repeat for the right side Part A.
STEP 4: Locate Part B (Bottom Panel).
STEP 5: With the Drawer Slides attached to
Part A, attach Part A to Part B (Bottom Panel)
fitting wood dowels into the dowel holes.
Secure Part A to Part B using four 50mm screws
and ensure that the grove at the back of Part A
meets the groove on Part B.
NOTE: The grooves must align as they serve as the track to slide in the back panel later in the assembly process.
STEP 6: Once Part A is attached to Part B, attach the other side of Part A to the bottom
and lay the unit on its back.
STEP 7: Locate Part J (Toe Kick) and fit it between the two Part As, aligning the pre-drilled
screw holes. Using four 50mm screws, secure the toe kick to Part A (Left) and Part A (Right).
STEP 8: Set the unit aside.
PRO TIP: Many assemblers use wood glue to secure the dowels and create added strength. Excess wood glue
can be removed with a damp towel.
STEP 9: Locate the two Part Fs (the Drawer Side Connecting Beams). Part D is a
support bridge between the drawers. Using a small bead of wood glue, place wood
dowels in the dowel holes on the side of each of the Part Fs.
NOTE: When using wood glue to secure dowels for Part D, Part E, Part H, and Part G, remember to also add a
bead of glue to their corresponding holes in Part A and Part B.
Remember – what you do on one side, do on the other.
Part B
(Bottom Panel)
Back Panel Groove
Part A
(Side Panel)
Part B
(Bottom Panel)
Part G
(Toe Kick)
Part F
3. Domain Cabinets Direct
888-US-CABINETS
Domain Cabinets Direct 3 | P a g e
STEP 10: Locate Part C (Back Panel). IF YOU CHOOSE NOT TO INSTALL PART C, PROCEED TO
STEP 12.
STEP 11: To install the back panel, face the finished side of Part C
towards the front of the cabinet and carefully slide it along the groves
at the rear of the unit. Be sure that the panel sits securely in the groves
along the base as well as the sides.
STEP 12: Locate Part D (Top Back Connecting Beam) and place it between the two Part
As at the top back of the unit using 50mm screws.
NOTE: IF YOU INSTALLED THE BACK PANEL, make sure to fit the groves of Part D over the top edge of the back
panel.
STEP 13: Locate the two Part Es (Back Reinforcement Beam). These support beams
secure the cabinet to the wall and (if you install the back panel) helps to secure the back
panel in place. Fit one Part E along the back of the cabinet at the top with the angled pre-
drilled hole in the center pointed upwards and secure it using one of the 30mm screws.
Use 50mm screws to attach Part I at the sides.
STEP 14: Repeat STEP 13 for the second Part E, securing it at the lower back section of
the unit and ensuring the angled pre-drilled hole points downward.
This completes the cabinet base assembly. For door and drawer assembly & instructions, set the cabinet base aside
and please continue.
Part D
Part D
Part C
(Back Panel)
Part E
(Back Reinforcement
Beams)
Part C
Part A
4. Domain Cabinets Direct
888-US-CABINETS
Domain Cabinets Direct 4 | P a g e
DRAWER & TRASH CAN FRAME ASSEMBLY
Drawer assembly is simple yet precise. As all of the drawers use dovetail joining, it is important to be very careful
during assembly and not to use unnecessary force as it could cause damage to the joiners.
Each drawer consists of 2 Drawer Sides (Part H), 2 Drawer Aprons (Part J – for soft closing drawers the rear and
back drawer aprons will vary slightly – the rear apron will have a notch at the base of each side whereas the front
apron has a straight base and will contain two pre-drilled holes in order to attach the Door Face), 1 Drawer Bottom
(Part I), and the Drawer Front.
For the Base Trash Can, you will create two drawer frames but only install a bottom in one of the drawers as the
other bottomless drawer frame will hold your trashcan.
STEP 1: Collect your tools. For this project you will need:
• Power Drill with Phillips
screwdriver tip
• Wood glue
• Rubber mallet
• 2 x 4 piece of scrap wood
STEP 2: For each drawer, locate 2 Drawer Sides (Part H), 2 Drawer Aprons (Part J – one notched as well as one
straight bottom with pre-drilled holes), 1 Drawer Bottom (Part I, ONLY for the top drawer & not for the
trashcan drawer frame), and the Drawer Front and set them on a secure work surface bottom groove
side facing upward.
STEP 3: Set aside one of the drawer aprons (Part J) and one of the drawer
sides (Part H). Place a small bead of wood glue between the
dovetail joiners on one side of the front drawer apron (Part J).
STEP 4: Align the drawer side (Part H) with the glued side of the front drawer apron (Part J), ensuring the groves
at the base of each piece align, and that the dovetail joiners align. Tap gently with the rubber mallet.
PRO TIP: To fit the pieces together and avoid damage to the box and joiners, use the scrap 2 x 4 by placing it over
the dovetail joint. Tap the mallet firmly but carefully. The 2 x 4 distributes the pressure of the mallet
evenly and also keeps the mallet from leaving impressions in the wood.
Remember – Although dovetail makes a very secure joining the dovetail tongues are vulnerable to damage until the
sides are assembled, be careful and try not to force pieces together.
STEP 5: Locate Part I (Drawer Bottom) for the top drawer ONLY. Slide the drawer bottom into place along the
grooves.
STEP 6: Place a small bead of wood glue between the dovetail joiners on
opposite side of the front drawer apron (Part J) already joined to the drawer
side (Part H). Take the other drawer side (Part H) and slide it into place, aligning
it with the glued dovetail joiners and the drawer base. Tap gently with the
rubber mallet as described in STEP 4 and as listed in the above PRO TIP.
Part J
(Drawer Apron)
Part H
(Drawer Side)
Part J
(Drawer Apron)
Part H
(Drawer Side)
5. Domain Cabinets Direct
888-US-CABINETS
Domain Cabinets Direct 5 | P a g e
Part J
(Drawer Apron)
Drawer Front
Trash Bin
STEP 7: Locate Part J (the back Drawer Apron). Apply small beads of wood glue
on both dovetail joiner sides. Align the back drawer apron (Part J) to the
drawer sides (Part H) and drawer base, gently tapping it into place with
the mallet. Repeat the instructions listed in the above PRO TIP.
Repeat STEP 2 – STEP 7 for Trash Can Frame but omit Part I
(Drawer Bottom).
STEP 8: Locate the Drawer Box Segment of the drawer glides set aside earlier during the cabinet base assembly.
STEP 9: Placing the assembled drawer box on its side, positioning the drawer
box segment of the drawer glides so that the break end faces the front of the
box and the pinched end faces the rear. Be sure to align the pre-drilled holes on
the drawer sides with holes on the drawer slide. Secure using the 12mm slide
screws. Repeat for each side of each drawer.
STEP 10: Attaching Drawer Fronts: Use a
piece of scribe molding as a spacer to align the
fronts then attach from the back, inside the drawer, using 30mm
screws. Clamps come in handy to hold the pieces in place during
drilling. Repeat for drawer and for the sink side false panel. Keep in
mind you won’t necessarily attach the drawer fronts to the drawer
aprons at the pre-drilled holes. Each style is different. As a rule,
ALWAYS attach aprons to the “meat” of the drawer front to avoid
drawer front damage.
NOTE: When attaching handles, be sure not to over-tighten screws as it could damage the front. You may wish
to attach hardware to the “meat” of the drawer front (such as the frame on a shaker-style cabinet).
FINISHING UP
Congratulations, you have just assembled your Base Trash Can! To finish up,
place the adhesive plastic stoppers at the corners of the drawers and doors to
keep them from banging upon closing.
Take a moment to hang your trashcan from the trash can frame (as shown) to
ensure the pull out feature functions properly. Note that the lip of the trash bin
should hang over the drawer frame to hold the bin in place.
Before installing, take a moment to re-inspect your work a final time, looking
for any screws that could be tightened or hinges that could be adjusted slightly.
Drawer Glide
(End)
Part L
(Front Drawer
Apron)
6. Domain Cabinets Direct
888-US-CABINETS
Domain Cabinets Direct 6 | P a g e
PART LIST
Base Trash Can (15” and 18”)
Part Part Name Quantity
Drawer Front 1
Trash Can Drawer Front 1
A Side Panel 2
B Bottom Panel 1
C Back Panel 1
D Top Back Connecting Beam 1
E Back Reinforcement Beam 2
F Top Front Connecting Beam 2
G Toe Kick 1
H Drawer Side 4
I Drawer Bottom 1
J Drawer Apron 4
50MM Screw 36
30MM Screw 14
Plastic Stopper 8
Wood Dowel 6
Drawer Slides (Pair) 2
(¢4 ×12MM) Slide Screw 24
A
A
B
C
D
E
F
F
G
H
H
H
H
I
J
J