This test method uses pressure sensitive tape to determine the adhesion quality of platings, marking inks or paints, and other materials used in conjunction with Printed Boards
YGJ-02 is applicable to the ink fastness test of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It also could be used to test adhesion condition of surface layers formed by the technique of vacuum coating, surface coating and lamination.
YGJ-02 is applicable to the ink fastness test of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It also could be used to test adhesion condition of surface layers formed by the technique of vacuum coating, surface coating and lamination.
BLJ-02 is designed for the determination of ink fastness of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It also could be used to test adhesion condition of surface layers formed by the technique of vacuum coating, surface coating and lamination.
BLJ-02 is designed for the determination of ink fastness of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It also could be used to test adhesion condition of surface layers formed by the technique of vacuum coating, surface coating and lamination.
BLJ-02 Disk Stripping Tester is professionally used to test ink fastness of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It could also be used to test adhesion condition of surface layers formed by the techniques of vacuum coating, surface coating and lamination.
Test method of mechanical properties and thickness measurement of orodispersi...Emilywu12
Or
odispersible Film shall have sufficient tensile
strength and flexibility. Otherwise it is liable to be broken or damaged. That’s why it
is necessary to test the mechanical properties of the Orodispersible Film.
i-COFTEK 3300 Coefficient of Friction Tester is designed to determine static and dynamic coefficient of friction tests of plastic films, sheets, rubber, paper, paper board, PP woven bags, fabric style, and metal-material belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, etc. Additionally the instrument could be used to test the smoothness of cosmetics, eye drops and other daily chemical products
Timber:
Introduction
Sampling & Acceptance Criterion
Code of Practice and Guidelines
Structural Steel:
Introduction
Sampling & Acceptance Criterion
Code of Practice and Guidelines
i-COFTEK 3300 Coefficient of Friction Tester is designed to determine static and dynamic coefficient of friction tests of plastic films, sheets, rubber, paper, paper board, PP woven bags, fabric style, and metal-material belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, etc. Additionally the instrument could be used to test the smoothness of cosmetics, eye drops and other daily chemical products.
BLJ-02 is designed for the determination of ink fastness of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It also could be used to test adhesion condition of surface layers formed by the technique of vacuum coating, surface coating and lamination.
BLJ-02 is designed for the determination of ink fastness of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It also could be used to test adhesion condition of surface layers formed by the technique of vacuum coating, surface coating and lamination.
BLJ-02 Disk Stripping Tester is professionally used to test ink fastness of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It could also be used to test adhesion condition of surface layers formed by the techniques of vacuum coating, surface coating and lamination.
Test method of mechanical properties and thickness measurement of orodispersi...Emilywu12
Or
odispersible Film shall have sufficient tensile
strength and flexibility. Otherwise it is liable to be broken or damaged. That’s why it
is necessary to test the mechanical properties of the Orodispersible Film.
i-COFTEK 3300 Coefficient of Friction Tester is designed to determine static and dynamic coefficient of friction tests of plastic films, sheets, rubber, paper, paper board, PP woven bags, fabric style, and metal-material belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, etc. Additionally the instrument could be used to test the smoothness of cosmetics, eye drops and other daily chemical products
Timber:
Introduction
Sampling & Acceptance Criterion
Code of Practice and Guidelines
Structural Steel:
Introduction
Sampling & Acceptance Criterion
Code of Practice and Guidelines
i-COFTEK 3300 Coefficient of Friction Tester is designed to determine static and dynamic coefficient of friction tests of plastic films, sheets, rubber, paper, paper board, PP woven bags, fabric style, and metal-material belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, etc. Additionally the instrument could be used to test the smoothness of cosmetics, eye drops and other daily chemical products.
Until recently, the word halal meant little to a producer who would pay a Muslim to
bless the slaughter of animals in the plant, not use alcohol and then put halal on the
product to entice Muslim consumers.
MBA students typically come from a background working in the private sector, while MPAs are more focused on the public sector. MPA students are more likely to have an undergraduate background in social sciences, while it's more common for MBAs to have undergrad degrees business, economics, or engineering.
Designed for those seeking leadership roles in the public or nonprofit sector, MPA develop skills in project and program management, policy implementation, public financial management, and human resources.
The Institute of Indonesian Engineers/Persatuan Insinyur Indonesia (PII) was established on May 23, 1952 in Bandung by Ir. Djuanda Kartawidjaja and Dr. Ir. Rooseno Soeryohadikoesoemo. PII is the largest and oldest professional organization of engineers in Indonesia that is acknowledged by Engineer Act 2014.
Mengenal Jenis Jenis Percetakan – Percetakan adalah sebuah bisnis yang memberikan jasa percetakan seperti buku, koran, ataupun plamfet. Bisnis percetakan memang sangat menguntungkan, apalagi jika kita mengetahui letak pasar kita ada di mana-mana.
Di Indonesia sendiri industri manufaktur masih menjadi salah satu sektor yang memberikan kontribusi hingga 20,27% pada perekonomian skala nasional, melansir Kementerian Investasi/BKPM.
he goal behind the “Right the First Time” principle is to minimize the number of product issues that get past design release and cause rework, scrap and change orders, leading to displeased customers
Whether you are using a single or multi-lamp UV Flexo system, it is crucial that
your UV lamps have a consistent UV intensity output. An uneven intensity distribution can lead to hot and cold spots in your curing, causing spoiled product.
Maslow mapped these needs onto a pyramid diagram, with each need occupying a different level of the pyramid. The lowest and biggest levels represent the basic and highest-priority needs that are essential for survival.
Pricing is a process of fixing the value that a manufacturer will receive in the exchange of services and goods. Pricing method is exercised to adjust the cost of the producer's offerings suitable to both the manufacturer and the customer
Analisis pasar ini menjadi hal penting yang harus diketahui oleh setiap orang dan juga menjadi dasar dan pondasi yang berkaitan dengan strategi pemasaran selanjutnya.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
How determine Adhesion
1. IPC-TM-650
TEST METHODS MANUAL
To determine the adhesion quality of
plating's, marking inks or paints, and
other materials used in conjunction
with Printed Boards
Ir. Sugeng Endarsiwi
2. • 1 Scope
• This test method uses pressure sensitive tape to determine the
adhesion quality of platings, marking inks or paints, and other materials
used in conjunction with Printed Boards.
• 2 Applicable Documents
• Commercial Item Description (CID) A-A-113 Tape, Pressure Sensitive,
Adhesive.
• 3 Test Specimens
• Any preproduction, first article, or production printed board. A
minimum of three tests should be performed for each evaluation
• 4 Apparatus or Material
• 4.1 Tape A roll of pressure sensitive tape 3M Brand 600 1/2 inch wide
or a tape as described in (CID AA-113), Type 1, Class B, except that the
tape may be clear. The shelf life of the tape is one year.
3. 5 Procedure
5.1 Test Press a strip of pressure sensitive tape, 50 mm [2.0 in] minimum in length,
firmly across the surface of
the test area removing all air entrapment. The time between application and
removal of tape shall be less than one minute.
Remove the tape by a rapid pull force applied approximately perpendicular (right
angle) to the test area. An unused strip of tape must be used for each test.
5.2 Evaluation
Visually examine tape and test area for evidence of any portion of the material
tested having been removed from the specimen.
5.3 Report
The report should note any evidence of material removed by this test.
4. 6 Notes
6.1 If plating overhang breaks off (slivers) and adheres to the tape, it is
evidence of overhang but not an adhesion failure.
6.2 If foreign material (oil, grease, etc.) is present on the test surface the
results may be affected.
6.3 Certification of 3M Brand 600 1/2 inch tape to CID-A-A113 is not required.
The 3M Brand 600 1/2 inch tape I available through most office supply stores.