Heat Shrink Joint Kit - 1.5-2.5sqmm 5Pair - SPA NHF 1.5-2.5-5PR
•
0 likes•702 views
This document provides information on cable joints for multicore and multipair XLPE and EPR cables for voltages up to 600/1000V. It lists various part numbers for joints suited to cable ranges with 5 to 61 cores of 1.5-2.5mm2. It also describes low voltage zero halogen cable joints that are fire resistant, designed and tested in accordance with fire testing standards. These joints can be used for both single and multicore low smoke and fire resistant cable configurations.
Report
Share
Report
Share
Download to read offline
Recommended
SPS Low Voltage Zero Halogen Cable Joints For Limited Fire Hazard Cables - SP...
SPS Low Voltage Zero Halogen Cable Joints For Limited Fire Hazard Cables - SP...Thorne & Derrick International
SPS Low Voltage Zero Halogen Cable Joints For Limited Fire Hazard Cables - SPS SPANHF Heat Shrink Cable Jointing KitsPrysmian FP400 Fire Resistant & fire performance cables
Prysmian FP400® is a fire resistant armoured cable that provides a robust wiring system that maintains circuit integrity during a fire. It produces very low smoke and acid gases, protecting human life and equipment. FP400® installs and terminates easily like a standard armoured cable without special tools. It is suitable for indoor or outdoor installation, including direct burial. FP400® meets various British and European fire safety standards for fire resistant cables.
Prysmian JEM Resin FP400 4 Core 10sqmm Fire Performance Cable Joint - FRZHMPJ2
Prysmian JEM Resin FP400 4 Core 10sqmm Fire Performance Cable Joint - FRZHMPJ2Thorne & Derrick International
This document summarizes Prysmian's FRZHMPJ low voltage fire performance cable joint kits. It provides details on the features of the joints, including the low hazard isocyanate-free JEM resin used, fire retardant and LSOH glass reinforced phenolic joint shells, and slim-line design. Technical data is given on the joints passing fire resistance tests to BS 6387 categories C, W and Z. Reference codes and dimensions are listed for joints with copper conductors from 4mm2 to 400mm2.Fire Resistant Cable Joints
This document discusses low voltage zero halogen cable joints that provide limited fire hazard. It offers:
1) A comprehensive range of heat shrink joints for single and multicore low smoke fume zero halogen cables that have been fire tested and compliant with London Underground standards.
2) Joints that incorporate flame retardant, non-halogen heat shrink tubing and a flexible outer fire barrier tube to provide a high degree of fire resistance.
3) Easy to use joints that are slim in profile and can be installed horizontally or vertically with an unlimited shelf life. Part numbers and cable ranges supported are provided.
3M Earthing Kits & Constant Force Springs | AKBAR TRADING EST. - mail@akbart...
This document provides information on various earthing kits and accessories from 3M for establishing electrical continuity and grounding across cable joints. It describes 10 different Armour Continuity Kits from 3M that are used for inline, tee, or branch configurations on armored power cables. It also lists constant force springs, earth bonding kits, electrical shielding and grounding braid tapes, copper braid, and tools that can be used for bonding armor wires and providing an electrical connection or fault current path for cable joints and terminations.
3M Armour Continuity Kits - 3M Scotch Electrical Shielding, Grounding & Earth...
3M Armour Continuity Kits - 3M Scotch Electrical Shielding, Grounding & Earth...Thorne & Derrick International
This document provides information on various earthing kits and components for electrical joints and terminations. It describes 3M armour continuity kits that provide electrical continuity across cable joints, along with accepted cable diameters and copper cord lengths. It also lists constant force springs, earth bonding kits, electrical shielding and grounding braids, and copper braid options for providing earth continuity and fault current paths. Technical support contact information is provided at the end.PVC Control cables 1.5 mm SWA
For control circuits unenclosed, enclosed in conduit, buried direct or in underground ducts for commercial, industrial, mining and electricity authority systems where mechanical damage may occur. The 90°C cable is used where improved aging properties to those of 75°C PVC insulated cable are required because of higher ambient temperatures.
Canadian 290w panel Kuk
This document summarizes the specifications of Canadian Solar's CS3K-290P/295P/300P high efficiency polycrystalline solar photovoltaic modules. The modules have a high PTC rating of up to 92.63% and provide benefits such as lower hot spot temperature, low power loss in cell connection, and minimized micro-cracks. They also have a low NMOT of 42±3°C and a low temperature coefficient of -0.37%/°C. The modules come with a 25-year linear power output warranty and a 12-year product warranty on materials and workmanship.
Recommended
SPS Low Voltage Zero Halogen Cable Joints For Limited Fire Hazard Cables - SP...
SPS Low Voltage Zero Halogen Cable Joints For Limited Fire Hazard Cables - SP...Thorne & Derrick International
SPS Low Voltage Zero Halogen Cable Joints For Limited Fire Hazard Cables - SPS SPANHF Heat Shrink Cable Jointing KitsPrysmian FP400 Fire Resistant & fire performance cables
Prysmian FP400® is a fire resistant armoured cable that provides a robust wiring system that maintains circuit integrity during a fire. It produces very low smoke and acid gases, protecting human life and equipment. FP400® installs and terminates easily like a standard armoured cable without special tools. It is suitable for indoor or outdoor installation, including direct burial. FP400® meets various British and European fire safety standards for fire resistant cables.
Prysmian JEM Resin FP400 4 Core 10sqmm Fire Performance Cable Joint - FRZHMPJ2
Prysmian JEM Resin FP400 4 Core 10sqmm Fire Performance Cable Joint - FRZHMPJ2Thorne & Derrick International
This document summarizes Prysmian's FRZHMPJ low voltage fire performance cable joint kits. It provides details on the features of the joints, including the low hazard isocyanate-free JEM resin used, fire retardant and LSOH glass reinforced phenolic joint shells, and slim-line design. Technical data is given on the joints passing fire resistance tests to BS 6387 categories C, W and Z. Reference codes and dimensions are listed for joints with copper conductors from 4mm2 to 400mm2.Fire Resistant Cable Joints
This document discusses low voltage zero halogen cable joints that provide limited fire hazard. It offers:
1) A comprehensive range of heat shrink joints for single and multicore low smoke fume zero halogen cables that have been fire tested and compliant with London Underground standards.
2) Joints that incorporate flame retardant, non-halogen heat shrink tubing and a flexible outer fire barrier tube to provide a high degree of fire resistance.
3) Easy to use joints that are slim in profile and can be installed horizontally or vertically with an unlimited shelf life. Part numbers and cable ranges supported are provided.
3M Earthing Kits & Constant Force Springs | AKBAR TRADING EST. - mail@akbart...
This document provides information on various earthing kits and accessories from 3M for establishing electrical continuity and grounding across cable joints. It describes 10 different Armour Continuity Kits from 3M that are used for inline, tee, or branch configurations on armored power cables. It also lists constant force springs, earth bonding kits, electrical shielding and grounding braid tapes, copper braid, and tools that can be used for bonding armor wires and providing an electrical connection or fault current path for cable joints and terminations.
3M Armour Continuity Kits - 3M Scotch Electrical Shielding, Grounding & Earth...
3M Armour Continuity Kits - 3M Scotch Electrical Shielding, Grounding & Earth...Thorne & Derrick International
This document provides information on various earthing kits and components for electrical joints and terminations. It describes 3M armour continuity kits that provide electrical continuity across cable joints, along with accepted cable diameters and copper cord lengths. It also lists constant force springs, earth bonding kits, electrical shielding and grounding braids, and copper braid options for providing earth continuity and fault current paths. Technical support contact information is provided at the end.PVC Control cables 1.5 mm SWA
For control circuits unenclosed, enclosed in conduit, buried direct or in underground ducts for commercial, industrial, mining and electricity authority systems where mechanical damage may occur. The 90°C cable is used where improved aging properties to those of 75°C PVC insulated cable are required because of higher ambient temperatures.
Canadian 290w panel Kuk
This document summarizes the specifications of Canadian Solar's CS3K-290P/295P/300P high efficiency polycrystalline solar photovoltaic modules. The modules have a high PTC rating of up to 92.63% and provide benefits such as lower hot spot temperature, low power loss in cell connection, and minimized micro-cracks. They also have a low NMOT of 42±3°C and a low temperature coefficient of -0.37%/°C. The modules come with a 25-year linear power output warranty and a 12-year product warranty on materials and workmanship.
3M Scotchcast 82 A3 Airfield Lighting Joint Kits, 70 120sqmm Data Sheet
3M Scotchcast 82 A3 Airfield Lighting Joint Kits, 70 120sqmm Data SheetThorne & Derrick International
The document discusses 3M's airfield ground lighting kits for joining and terminating low voltage cables. It describes the 82 Series in-line joint kit which is designed for single core screened cables up to 5kV and multi-core unarmored cables up to 1.1kV. It also describes the AGL series kit which is available in heat shrink or cold shrink versions and is approved by the UK Ministry of Defence and Department of the Environment. The kit is suitable for different cable diameters and configurations including unscreened, screened, and externally earthed cables.Airfield Ground Lighting (AGL) Heat Shrink Cable Joint Kits
This document provides information on heat shrink joint kits for airfield lighting cables and traffic control cables. For airfield lighting cables, it lists part numbers for joint kits for primary and secondary cables with various connector and cable types. For traffic control cables, it similarly lists part numbers for joint kits for loop cables, feeder cables, telephone cables, and motorway cables. The joint kits are approved for use on UK military and civilian airports and by the UK's Department of Transport.
Airfield Ground Lighting Cables - 5kV Single Core 6sqmm (Primary & Secondary)
Airfield Ground Lighting Cables - 5kV Single Core 6sqmm (Primary & Secondary)Thorne & Derrick International
This document provides specifications for 5kV airfield lighting cables. The cables meet FAA and British Standards for conductor insulation materials and testing. They are rated for a voltage of 5kV and tested to detect porosity in the insulation and sheath. The cables can be installed at a minimum temperature of +5°C and are available with customized color coding for the insulation and sheath. Technical data is provided for a cable with a 6.0mm2 cross section including stranding, insulation/sheath thickness, diameter, resistance, and weight.Optex ax 500
The AX-250/500PLUS photoelectric detector provides a 5 year warranty and improved outdoor detection capabilities. It uses a dual beam design with synchronized pulsed signals that can eliminate unwanted activation. The detector automatically compensates for environmental changes and has an easy installation process. It offers long-term reliability and precise detection, even in harsh outdoor conditions.
Nexans Airfield Ground Lighting Cables (Primary Secondary)
This document provides information on various types of cables for airfield lighting applications, including:
- Primary circuit cables used between constant current regulators and transformers, including the FLYCY, FL2XCY, FL2XCYRY, RHDt, and RHV cables.
- Secondary circuit cables used between transformers and lights, including the H07RN-F and FLGG cables.
- 400Hz cables including the RHEYGROUND, RHEYCORD, and RHEYPUR cables.
- It provides specifications for each cable type including conductor material and size, insulation material, screening, outer sheath material, voltage rating, temperature rating, bending radius, and applicable standards.
Specifications HK60p_240-260_en
This document provides specifications for a polycrystalline photovoltaic module. The module comes with a 12-year product warranty and performance guarantee, with power output guaranteed to be at least 82% after 25 years. Key features include high efficiency polycrystalline cells, tempered safety glass, and resistance to weather conditions like wind, snow, and hail. Electrical and mechanical specifications are provided for modules ranging from 240 to 260W in power output.
Fuses(The power system protection)
A fuse is a short piece of metal, inserted in the circuit, which melts when excessive current flows through it and thus breaks the circuit. The fuse element is generally made of materials having low melting point, high conductivity and least deterioration due to oxidation e.g., silver, copper etc. It is inserted in series with the circuit to be protected. Under normal operating conditions, the fuse element is at a temperature below its melting point. Therefore, it carries the normal current without overheating. However, when a short-circuit or overload occurs, the current through the fuse increases beyond its rated value. This raises the temperature and fuse element melts (or blows out), disconnecting the circuit protected by it. In this way, a fuse protects the machines and equipment from damage due to excessive currents.
1.1 0128 measurement of the force...mv joints
Thermal testing was conducted on medium voltage cable joints, including screw connectors and compression connectors. The screw connectors had more flexibility and withstood the testing better, with lower resistance and less damage than the compression connectors. One cable showed a burn hole in the insulation and shielding near the compression connector joint after getting hot.
Canadian solar datasheet- ku-max_cs3u-p_high efficiency_v5.6_in
Buy Canadian Solar Panels
CANADIAN SOLAR KuMax CS3U-350
Canadian Solar Panel 350 Watt
Canadian Poly PERc 350 watt solar panel
Clenergy PV EZ Rack
Clenergy's PV-ezRack SolarRoof is a versatile roof-mounting solution for pitched and flat roofs that can accommodate most module types. It uses an innovative rail system along with Z-modules and standard roof hooks to provide a safe, cost-effective installation for solar panels. The system is suitable for roof slopes up to 60 degrees, roof heights up to 20 meters, and wind and snow loads up to 80m/s and 1.4kN/m2. An aluminum construction and 10-year warranty provide durability.
Cable Spiker - Accles & Shelvoke
The Accles & Shelvoke Cable Spiker is a tool for safely de-energizing electric power cables before work is done on them. It can penetrate all types of cable coverings and is operated remotely via a lanyard for employee safety. If a live cable is spiked, the fault current will likely trip the circuit breaker without harming the tool. The Cable Spiker provides a safer alternative to manual spiking with hammers or sticks.
CATU Cable Spike Equipment - CATU MP-213 Cable Spiking Tools
The document describes several underground cable testing and earthing equipment items:
1) A multistrand copper earth wire that is 2.50 meters long with an earth clamp for connecting to underground systems.
2) A cable testing stick that can pierce cable insulation and shielding up to 50 kV with a 70 mm diameter capacity.
3) A cable spike equipment with a 9mm bullet for testing voltage and earthing on underground cables along with spare blades and an extractor.
Datasheet kbm
This document provides specifications for a BNC male connector suitable for cables with inner conductors from 0.3 to 1.1 mm in diameter. The connector has an impedance of 75 ohms and operates from 0-1 GHz with a return loss better than -54 dB. It is made from brass, nickel, bronze, derlin, zinc, silicone, steel and protected plastic and can operate from -40 to +120 degrees Celsius.
CSUN320-72M_QSAR_ENG
1) CSUN produces high-efficiency solar modules under the QSAR brand, with efficiencies up to 19% and a 25-year linear power output warranty.
2) The CSUN320-72M is their highest power module, producing up to 320W with a multi-layer encapsulant, tempered glass, and aluminum frame.
3) CSUN has established itself as a leading global producer of solar panels through strict quality control and delivering over 1.4GW of products worldwide.
Trina Duomax 250w Solar Module
Trina Solar is a leading global manufacturer of photovoltaic products. They believe close cooperation with partners is critical to success. They are committed to building strategic partnerships to drive shared success. Their products include mono and multi solar modules that offer improved durability, enhanced safety, and increased value through a 30-year linear warranty.
Newly Developed Products 2016 - Part 3
This document introduces several newly developed products from 2016, including a supreme-grade epoxy with chemical, abrasion and heat resistance, a nickel-conductive epoxy that meets NASA outgassing specifications, a UV-curable system with abrasion resistance and flexibility, a silver-filled silicone that meets NASA outgassing specifications, and a chemical-resistant epoxy with a high glass transition temperature. Contact information is provided at the end.
Trina 315 silver frame
The document summarizes the specifications of Trina Solar's 60-cell monocrystalline photovoltaic modules. The modules have a power output range of 275-315W, maximum efficiency of 19.2%, and come with a 10-year product warranty and 25-year linear power warranty. They are certified to withstand wind loads up to 2400 Pa, snow loads up to 5400 Pa, and hailstones up to 35 mm at 97 km/h. The modules have high reliability due to stringent quality control and testing beyond certification requirements.
Pv grid connected inverter
Shenzhen Solartech Renewable Energy Co.,Ltd is a Chinese company that produces PV grid-connected inverters. The inverters convert DC power from solar panels into AC power for the grid. They utilize maximum power point tracking technology to optimize power output. Solartech offers inverters in models of 1000W, 2000W and 3000W that are lightweight, compact and have protections such as anti-islanding and overcurrent limiting.
Newly Developed Products 2016 - Part 2
2016 was a standout year for developing new and innovative products. Let’s take a look back on some adhesives, sealants, coating and encapsulation compounds that were released in this past year.
Newly Developed Products 2016 - Part 1
With 2017 on the horizon, it is the perfect time to reflect on what our most outstanding accomplishments were this past year. Here are some of the breakthrough epoxies, silicones and UV curable products that were developed in 2016 at a glance.
Cembre 2A160 Crimp Lugs 800sqmm 11-33kV
The document describes heavy duty copper tube terminals of the 2A-M series. The terminals are made from high purity copper tube and are annealed. They feature a double length barrel for enhanced electrical and mechanical performance in heavy duty applications. The terminals are electrolytically tin plated to prevent atmospheric corrosion. The document also provides specifications and dimensions for various terminal sizes.
Tyco TE Raychem LFRJ Fire Resistant Cable Joints (LV)
The Raychem LFRJ is a new flame retardant inline joint system for safety class cables up to 1 kV that combines the high performance flame retardant components of Raychem heat shrink technology. It meets the same characteristics and requirements as safety class cables, is universally applicable for power and control cables, and meets cable flexibility requirements after installation without any fragile components or hazardous materials, making installation easy and fast.
More Related Content
What's hot
3M Scotchcast 82 A3 Airfield Lighting Joint Kits, 70 120sqmm Data Sheet
3M Scotchcast 82 A3 Airfield Lighting Joint Kits, 70 120sqmm Data SheetThorne & Derrick International
The document discusses 3M's airfield ground lighting kits for joining and terminating low voltage cables. It describes the 82 Series in-line joint kit which is designed for single core screened cables up to 5kV and multi-core unarmored cables up to 1.1kV. It also describes the AGL series kit which is available in heat shrink or cold shrink versions and is approved by the UK Ministry of Defence and Department of the Environment. The kit is suitable for different cable diameters and configurations including unscreened, screened, and externally earthed cables.Airfield Ground Lighting (AGL) Heat Shrink Cable Joint Kits
This document provides information on heat shrink joint kits for airfield lighting cables and traffic control cables. For airfield lighting cables, it lists part numbers for joint kits for primary and secondary cables with various connector and cable types. For traffic control cables, it similarly lists part numbers for joint kits for loop cables, feeder cables, telephone cables, and motorway cables. The joint kits are approved for use on UK military and civilian airports and by the UK's Department of Transport.
Airfield Ground Lighting Cables - 5kV Single Core 6sqmm (Primary & Secondary)
Airfield Ground Lighting Cables - 5kV Single Core 6sqmm (Primary & Secondary)Thorne & Derrick International
This document provides specifications for 5kV airfield lighting cables. The cables meet FAA and British Standards for conductor insulation materials and testing. They are rated for a voltage of 5kV and tested to detect porosity in the insulation and sheath. The cables can be installed at a minimum temperature of +5°C and are available with customized color coding for the insulation and sheath. Technical data is provided for a cable with a 6.0mm2 cross section including stranding, insulation/sheath thickness, diameter, resistance, and weight.Optex ax 500
The AX-250/500PLUS photoelectric detector provides a 5 year warranty and improved outdoor detection capabilities. It uses a dual beam design with synchronized pulsed signals that can eliminate unwanted activation. The detector automatically compensates for environmental changes and has an easy installation process. It offers long-term reliability and precise detection, even in harsh outdoor conditions.
Nexans Airfield Ground Lighting Cables (Primary Secondary)
This document provides information on various types of cables for airfield lighting applications, including:
- Primary circuit cables used between constant current regulators and transformers, including the FLYCY, FL2XCY, FL2XCYRY, RHDt, and RHV cables.
- Secondary circuit cables used between transformers and lights, including the H07RN-F and FLGG cables.
- 400Hz cables including the RHEYGROUND, RHEYCORD, and RHEYPUR cables.
- It provides specifications for each cable type including conductor material and size, insulation material, screening, outer sheath material, voltage rating, temperature rating, bending radius, and applicable standards.
Specifications HK60p_240-260_en
This document provides specifications for a polycrystalline photovoltaic module. The module comes with a 12-year product warranty and performance guarantee, with power output guaranteed to be at least 82% after 25 years. Key features include high efficiency polycrystalline cells, tempered safety glass, and resistance to weather conditions like wind, snow, and hail. Electrical and mechanical specifications are provided for modules ranging from 240 to 260W in power output.
Fuses(The power system protection)
A fuse is a short piece of metal, inserted in the circuit, which melts when excessive current flows through it and thus breaks the circuit. The fuse element is generally made of materials having low melting point, high conductivity and least deterioration due to oxidation e.g., silver, copper etc. It is inserted in series with the circuit to be protected. Under normal operating conditions, the fuse element is at a temperature below its melting point. Therefore, it carries the normal current without overheating. However, when a short-circuit or overload occurs, the current through the fuse increases beyond its rated value. This raises the temperature and fuse element melts (or blows out), disconnecting the circuit protected by it. In this way, a fuse protects the machines and equipment from damage due to excessive currents.
1.1 0128 measurement of the force...mv joints
Thermal testing was conducted on medium voltage cable joints, including screw connectors and compression connectors. The screw connectors had more flexibility and withstood the testing better, with lower resistance and less damage than the compression connectors. One cable showed a burn hole in the insulation and shielding near the compression connector joint after getting hot.
Canadian solar datasheet- ku-max_cs3u-p_high efficiency_v5.6_in
Buy Canadian Solar Panels
CANADIAN SOLAR KuMax CS3U-350
Canadian Solar Panel 350 Watt
Canadian Poly PERc 350 watt solar panel
Clenergy PV EZ Rack
Clenergy's PV-ezRack SolarRoof is a versatile roof-mounting solution for pitched and flat roofs that can accommodate most module types. It uses an innovative rail system along with Z-modules and standard roof hooks to provide a safe, cost-effective installation for solar panels. The system is suitable for roof slopes up to 60 degrees, roof heights up to 20 meters, and wind and snow loads up to 80m/s and 1.4kN/m2. An aluminum construction and 10-year warranty provide durability.
Cable Spiker - Accles & Shelvoke
The Accles & Shelvoke Cable Spiker is a tool for safely de-energizing electric power cables before work is done on them. It can penetrate all types of cable coverings and is operated remotely via a lanyard for employee safety. If a live cable is spiked, the fault current will likely trip the circuit breaker without harming the tool. The Cable Spiker provides a safer alternative to manual spiking with hammers or sticks.
CATU Cable Spike Equipment - CATU MP-213 Cable Spiking Tools
The document describes several underground cable testing and earthing equipment items:
1) A multistrand copper earth wire that is 2.50 meters long with an earth clamp for connecting to underground systems.
2) A cable testing stick that can pierce cable insulation and shielding up to 50 kV with a 70 mm diameter capacity.
3) A cable spike equipment with a 9mm bullet for testing voltage and earthing on underground cables along with spare blades and an extractor.
Datasheet kbm
This document provides specifications for a BNC male connector suitable for cables with inner conductors from 0.3 to 1.1 mm in diameter. The connector has an impedance of 75 ohms and operates from 0-1 GHz with a return loss better than -54 dB. It is made from brass, nickel, bronze, derlin, zinc, silicone, steel and protected plastic and can operate from -40 to +120 degrees Celsius.
CSUN320-72M_QSAR_ENG
1) CSUN produces high-efficiency solar modules under the QSAR brand, with efficiencies up to 19% and a 25-year linear power output warranty.
2) The CSUN320-72M is their highest power module, producing up to 320W with a multi-layer encapsulant, tempered glass, and aluminum frame.
3) CSUN has established itself as a leading global producer of solar panels through strict quality control and delivering over 1.4GW of products worldwide.
Trina Duomax 250w Solar Module
Trina Solar is a leading global manufacturer of photovoltaic products. They believe close cooperation with partners is critical to success. They are committed to building strategic partnerships to drive shared success. Their products include mono and multi solar modules that offer improved durability, enhanced safety, and increased value through a 30-year linear warranty.
Newly Developed Products 2016 - Part 3
This document introduces several newly developed products from 2016, including a supreme-grade epoxy with chemical, abrasion and heat resistance, a nickel-conductive epoxy that meets NASA outgassing specifications, a UV-curable system with abrasion resistance and flexibility, a silver-filled silicone that meets NASA outgassing specifications, and a chemical-resistant epoxy with a high glass transition temperature. Contact information is provided at the end.
Trina 315 silver frame
The document summarizes the specifications of Trina Solar's 60-cell monocrystalline photovoltaic modules. The modules have a power output range of 275-315W, maximum efficiency of 19.2%, and come with a 10-year product warranty and 25-year linear power warranty. They are certified to withstand wind loads up to 2400 Pa, snow loads up to 5400 Pa, and hailstones up to 35 mm at 97 km/h. The modules have high reliability due to stringent quality control and testing beyond certification requirements.
Pv grid connected inverter
Shenzhen Solartech Renewable Energy Co.,Ltd is a Chinese company that produces PV grid-connected inverters. The inverters convert DC power from solar panels into AC power for the grid. They utilize maximum power point tracking technology to optimize power output. Solartech offers inverters in models of 1000W, 2000W and 3000W that are lightweight, compact and have protections such as anti-islanding and overcurrent limiting.
Newly Developed Products 2016 - Part 2
2016 was a standout year for developing new and innovative products. Let’s take a look back on some adhesives, sealants, coating and encapsulation compounds that were released in this past year.
Newly Developed Products 2016 - Part 1
With 2017 on the horizon, it is the perfect time to reflect on what our most outstanding accomplishments were this past year. Here are some of the breakthrough epoxies, silicones and UV curable products that were developed in 2016 at a glance.
What's hot (20)
3M Scotchcast 82 A3 Airfield Lighting Joint Kits, 70 120sqmm Data Sheet
3M Scotchcast 82 A3 Airfield Lighting Joint Kits, 70 120sqmm Data Sheet
Airfield Ground Lighting (AGL) Heat Shrink Cable Joint Kits
Airfield Ground Lighting (AGL) Heat Shrink Cable Joint Kits
Airfield Ground Lighting Cables - 5kV Single Core 6sqmm (Primary & Secondary)
Airfield Ground Lighting Cables - 5kV Single Core 6sqmm (Primary & Secondary)
Nexans Airfield Ground Lighting Cables (Primary Secondary)
Nexans Airfield Ground Lighting Cables (Primary Secondary)
Canadian solar datasheet- ku-max_cs3u-p_high efficiency_v5.6_in
Canadian solar datasheet- ku-max_cs3u-p_high efficiency_v5.6_in
CATU Cable Spike Equipment - CATU MP-213 Cable Spiking Tools
CATU Cable Spike Equipment - CATU MP-213 Cable Spiking Tools
Viewers also liked
Cembre 2A160 Crimp Lugs 800sqmm 11-33kV
The document describes heavy duty copper tube terminals of the 2A-M series. The terminals are made from high purity copper tube and are annealed. They feature a double length barrel for enhanced electrical and mechanical performance in heavy duty applications. The terminals are electrolytically tin plated to prevent atmospheric corrosion. The document also provides specifications and dimensions for various terminal sizes.
Tyco TE Raychem LFRJ Fire Resistant Cable Joints (LV)
The Raychem LFRJ is a new flame retardant inline joint system for safety class cables up to 1 kV that combines the high performance flame retardant components of Raychem heat shrink technology. It meets the same characteristics and requirements as safety class cables, is universally applicable for power and control cables, and meets cable flexibility requirements after installation without any fragile components or hazardous materials, making installation easy and fast.
Zone 1 (ATEX) Bulkhead Fluorescent Fire Exit Luminaire - HDL109 (32 Watts)
Zone 1 (ATEX) Bulkhead Fluorescent Fire Exit Luminaire - HDL109 (32 Watts)Thorne & Derrick International
This document provides information on the HDL 109 bulkhead luminaire from Hadar Lighting. It is a Zone 1 approved explosion-proof bulkhead light fixture intended for use in hazardous locations. It uses 2 x 18W compact fluorescent lamps and has an emergency version. Key features include IP66/67 ingress protection, operating temperatures up to 100°C, mounting options of Unistrut, bracket or pole, and ATEX and IEC Ex certification.Prysmian BICC BICON U10CHEX Crimp Tool Die Set - 10sqmm Copper
The document lists various tooling components for compression tools. It includes a range of U-type hexagonal die sets from 10mm to 400mm that can be used with two-stage hydraulic tools to crimp BICON compression connectors onto aluminum or copper cables. The tools deliver 11.5 tonnes of compressive force and include overload protection to ensure crimp reliability. They can accept interchangeable die sets for different cable and lug sizes up to 400mm2.
3M Scotchcast Resin, Epoxy Resin 8
This document provides information on the properties and usage of 3M Scotchcast Electrical Resin 8, including:
- It is a two-part, room-curing epoxy resin that offers long pot life, low viscosity, and high moisture resistance.
- It has a mix ratio of 1:1 by weight and cures at room temperature over 24-48 hours or can be quick-cured at elevated temperatures.
- The resin has various applications including potting, encapsulating, and coating electrical and electronic components.
Rail PPE - Hi-Viz Visibility Orange Clothing (Jackets, Trousers, Coveralls, P...
Rail PPE - Hi-Viz Visibility Orange Clothing (Jackets, Trousers, Coveralls, P...Thorne & Derrick International
High Visibility Clothing is a mandatory requirement for all persons associated with rail track or lineside working. With most of the work undertaken on active railways, both day, night and under different weather conditions, it is very important that the highest level of visibility is maintained.
ProGARM supply a high visibility orange range of protective clothing which complies with the GO/RT 3279 standard specified by the rail industry - orange high visibility garments are designed for workers on or near the rail trackside, this includes hi-visibility orange trousers, jackets, coveralls, polo shirts and sweatshirts.
There are specific standards this high visibility clothing has to meet to be worn on the UK rail network:
GO/RT 3279 - the 'minimum requirements for high-visibility clothing for being conspicuous on the lineside or on or near the line'. Colour: Orange.
BS EN471 - The minimum requirements for high visibility clothing worn as part of personal protective equipment, conforming to the class 2 specification in respect of the minimum area of visible materials.
All high visibility PPE garments have to incorporate both fluorescent and retro-reflective materials. The railway standard specifies the high visibility warning clothing to be orange meeting the GORT 3279 standard.
Railway Group Standard GO/RT 3279
GO/RT 3279 standard is based on the European standard EN 471:2003 + A1:2007. GO/RT 3279 requires garments to meet at least class 2 (the mid-point of a 3-class scale) of EN 471 for the minimum area of high-visibility materials used within a garment. Whereas the European standard permits several different colours of high-visibility materials, the Railway Group Standard specifies an orange colour.
Railway locomotive headlights pick out retro-reflective materials in high-visibility clothing. Again, the Railway Group Standard GO/RT 3279 draws on EN 471:2003 + A1:2007 and specifies materials for use that meet the highest level of photometric performance criteria that are specified within the standard. GO/RT 3279 also defines the requirements for a high-visibility minivest. These are required to conform to class 1 design requirements of EN 471:2003 + A1:2007, except they need to exceed the requirements in EN 471 for both the minimum area of the orange background material and retro-reflective tape in the garment.
Nexans GPH Cable Lugs, Splices & Ferrules - Compression Cable Lugs Catalogue
Nexans GPH Cable Lugs, Splices & Ferrules - Compression Cable Lugs CatalogueThorne & Derrick International
GPH (Nexans) medium voltage mechanical cable connectors and cable lugs suit aluminium and copper conductor ranges 16-1000sqmm up to 33kV.
GPH (Nexans) Medium Voltage Cable Connectors & Cable Lugs - Ranges
*Aluminium round stranded up to 1000sqmm
*Aluminium round solid up to 1000sqmm
*Copper round stranded up to 800sqmm
Medium Voltage Cable Connector/Lug Specification - Connector body is high strength aluminium alloy with brass bolts featuring alley key and hexagon head - all surfaces are tin-plated.
Nexans manufacture a complete range of
accessories for MV Medium Voltage underground cables: Pre-moulded EPDM separable screened connectors to ANSI and CENELEC standards, epoxy bushings for ANSI and CENELEC standards as well as a large range of medium voltage slip on, cold-shrinkable and heat-shrinkable terminations and cable joints. Nexans MV medium voltage cable accessories are supported by a tailor-made MV cable jointers tol kit to enable the installation of MV connectors, joints and terminations
Nexans GPH Cable Lugs, Splices & Ferrules - Compression Joints Catalogue
Nexans GPH Cable Lugs, Splices & Ferrules - Compression Joints CatalogueThorne & Derrick International
GPH (Nexans) medium voltage mechanical cable connectors and cable lugs suit aluminium and copper conductor ranges 16-1000sqmm up to 33kV.
GPH (Nexans) Medium Voltage Cable Connectors & Cable Lugs - Ranges
*Aluminium round stranded up to 1000sqmm
*Aluminium round solid up to 1000sqmm
*Copper round stranded up to 800sqmm
Medium Voltage Cable Connector/Lug Specification - Connector body is high strength aluminium alloy with brass bolts featuring alley key and hexagon head - all surfaces are tin-plated.
Nexans manufacture a complete range of
accessories for MV Medium Voltage underground cables: Pre-moulded EPDM separable screened connectors to ANSI and CENELEC standards, epoxy bushings for ANSI and CENELEC standards as well as a large range of medium voltage slip on, cold-shrinkable and heat-shrinkable terminations and cable joints. Nexans MV medium voltage cable accessories are supported by a tailor-made MV cable jointers tol kit to enable the installation of MV connectors, joints and terminations
Cembre Cable Crimp Lugs (Single Hole - Copper Conductors) - A Range
This document provides product data and specifications for Cembre copper tube crimping lugs type AM. The lugs are manufactured from electrolytic copper tube to provide efficient conductivity and mechanical strength. They are annealed to guarantee ductility and withstand severe deformation during installation and vibration. The lugs come in various sizes to accommodate different conductor sizes and are marked with relevant certification information. Dimensional specifications and sections are provided for the different lug models.
Cembre Single Hole Crimp Lugs
This document provides specifications for copper tube crimping lugs manufactured by Cembre for connecting copper conductors. It describes the materials and dimensions of the lugs. The lugs are made from annealed copper tube to provide optimum ductility and withstand deformation during crimping. Tables provide the dimensions and electrical ratings for various lug models for different conductor sizes.
Prysmian Draka - Marine & Offshore LV HV Cables
Prysmian Draka supplies a complete range of marine, offshore oil and gas power, control and instrumentation cables for use on oil platforms and floating oil production units (FPSO). T&D distribute an extensive range of cables from 250V to 33kV - a complete range of marine, offshore oil and gas industry cables to IEEE, UKOOA and IEC specification.
The T&D and Prysmian commercial relationshipgoes back to the previous century. T&D have distributed the Prysmian Components range of cable joints, cable glands, cable cleats and high voltage cable terminations for several decades. The new relationship will now extend T&D's portfolio to embrace Prysmian Draka Offshore Marine, Oil & Gas cables.
Prysmian Draka Marine Offshore Oil & Gas Cables - Overview
RFOU(i) 250V S1/S5 Halogen-free, mud resistant instrumentation cable
RFOU(c)250V S2/S6 Halogen-free, mud resistant instrumentation cable
BFOU(i)250V S3/S7 Halogen-free, mud and fire resistant instrumentation cable
BFOU(c)250V S4/S8 Halogen-free, mud and fire resistant instrumentation cable
RU(i) 250V S11 Halogen-free, unarmoured, mud resistant instrumentation cable
BU(i) 250V S13 Halogen-free, unarmoured, mud resistant instrumentation cable
BU(c) 250V S14 Halogen-free, unarmoured, mud resistant instrumentation cable
RFOU 0,6/1kV P1/P8 Halogen-free, mud resistant power cable
RFOU 6/10(12)kV P3/P10 Halogen-free, mud resistant HV power cable
RFOU 12/20(24)kVP19/P21 Halogen-free, mud resistant HV power cable
BFOU 0,6/1kV P5/P12 Halogen-free, mud resistant, fire resistant power cable
UX 1000V P15 Halogen-free, mud resistant insulated conductor
RU 0,6/1kV P18 Halogen-free, unarmoured, mud resistant power cable
BU 0,6/1kV P17 Halogen-free, fire resistant, unarmoured, mud resistant power cable
QFCI Fire resistant optical fibre cable, halogen-free
AICI Optical cable for industrial environments
IFLI 250V P16 Cables for living quarter and office areas, halogen-free
Cembre - Hydraulic Tools, Mechanical Tools, Crimping Tools, Cable Cutters, AT...
Cembre - Hydraulic Tools, Mechanical Tools, Crimping Tools, Cable Cutters, AT...Thorne & Derrick International
Cembre is today the leading Italian manufacturer and one of the largest European manufacturers of electrical compression connectors and related installation tooling.
T&D are Preferred Distributors for the Cembre range of cable crimping tools.
Cembre crimping tools are always the first choice of the electrical contractor and cable jointer for ease of use, reliability and versatility. This includes Cembre hydraulic, ratchet and battery crimping tools.
T&D distribute Cembre tools for LV-HV cable cutting of armoured (SWA), braided (SWB) and unarmoured cables with copper or aluminium conductors - this includes manual, ratchet and hydraulic cable cutters and cutting tools.
T&D are Main UK Stockists for the Cembre range of copper compression connectors (cable crimp lugs and splices) for low voltage cable crimping applications.
Cembre cable crimp lug ranges include : transformer cable lugs, single hole cable lugs, 2 hole cable lugs, narrow palm cable lugs, Ceetaps (C Taps) and reducer crimps. This includes copper, aluminium and bi-metallic Cembre crimp connectors to suit all cable termination, jointing and electrical applications.
T&D also offer competitive prices for Burndy, Mecatraction, Panduit, Thomas & Betts, Klauke and Prysmian (BICC BICON) ranges of cable lugs, splices, terminals and connectors.
Cembre Overview: Terminals, Connectors, Connector Sleeves, Copper Crimping Lugs, ATEX Cable Glands, Plugs, Mechanical Tools, Hydraulic Tools, Crimping Tools, Cable Cutters, Cable Clamps, High Voltage Copper Terminals, Cable Ties, Heatshrinkable Tubing. Viewers also liked (13)
Tyco TE Raychem LFRJ Fire Resistant Cable Joints (LV)
Tyco TE Raychem LFRJ Fire Resistant Cable Joints (LV)
Zone 1 (ATEX) Bulkhead Fluorescent Fire Exit Luminaire - HDL109 (32 Watts)
Zone 1 (ATEX) Bulkhead Fluorescent Fire Exit Luminaire - HDL109 (32 Watts)
Prysmian BICC BICON U10CHEX Crimp Tool Die Set - 10sqmm Copper
Prysmian BICC BICON U10CHEX Crimp Tool Die Set - 10sqmm Copper
Rail PPE - Hi-Viz Visibility Orange Clothing (Jackets, Trousers, Coveralls, P...
Rail PPE - Hi-Viz Visibility Orange Clothing (Jackets, Trousers, Coveralls, P...
Nexans GPH Cable Lugs, Splices & Ferrules - Compression Cable Lugs Catalogue
Nexans GPH Cable Lugs, Splices & Ferrules - Compression Cable Lugs Catalogue
Nexans GPH Cable Lugs, Splices & Ferrules - Compression Joints Catalogue
Nexans GPH Cable Lugs, Splices & Ferrules - Compression Joints Catalogue
Cembre Cable Crimp Lugs (Single Hole - Copper Conductors) - A Range
Cembre Cable Crimp Lugs (Single Hole - Copper Conductors) - A Range
Cembre - Hydraulic Tools, Mechanical Tools, Crimping Tools, Cable Cutters, AT...
Cembre - Hydraulic Tools, Mechanical Tools, Crimping Tools, Cable Cutters, AT...
Similar to Heat Shrink Joint Kit - 1.5-2.5sqmm 5Pair - SPA NHF 1.5-2.5-5PR
SPS - LV MV Heat Shrink Cable Joints & Terminations (Full Catalogue)
The document provides information on cable accessories including terminations, joints, heat shrink components, connectors, tapes and tools. It lists various termination kits for single core and three core XLPE and PILC cables from 0.6kV to 33kV. Joints listed include triplex joints for 12kV cables, universal heat shrink joints for 7.2/12kV, 3 core joints for 17.5-33kV cables, and cold shrink joints for 7.2-33kV. Accessories such as heat shrink tubing, anti-track materials, and compression lugs are also listed. The company is based in the UK and specializes in heat shrink and cold shrink cable joints and terminations
Shrink Polymer Systems - Heat Shrink Cable Joints & Cable Terminations, Low ...
Shrink Polymer Systems - Heat Shrink Cable Joints & Cable Terminations, Low ...Thorne & Derrick International
Shrink Polymer Systems high voltage (HV) heat shrink cable joints, cable terminations and busbar tape and tubings for 6.6kV, 11kV, 24kV and 33kV.
SPS HV Cable Joints - Straight, transition, pot-end, trifurcating and branch cable joints for both polymeric and paper cables, 11kV-33kV.
SPS HV Cable Terminations - Single and 3 core, indoor and outdoor high voltage cable terminations for both polymeric and paper cables, 11kV-33kV.
SPS 6.6kV, 11kV and 33kV heat shrink cable joint kits and cable termination kits are quick and easy to install by trained HV jointers providing high reliability and excellent performance for high voltage cable circuits. SPS heat shrink cable termination and joint kits are suitable for three and single core XLPE, EPR and PILC cables, including utility specification Triplex cables 11kV-33kV.
SPS heat shrink cable joints and cable terminations are Tested to International Standards outlined in Cenelec HD 628 S1 and 629.1 S2 : 2006 - encompassing VDE 0278 and IEC 60502 - peace of mind performance.
THORNE & DERRICK UK are Exclusive UK Distributors for SPS Shrink Polymer Systems. T&D SPS provide the most competitive prices, largest stocks and first class service for LV-HV cable joints, cable terminations and accessories up to 33kV.
Tested to Cenelec, VDE, IEC Standards - save time and money without compromising high voltage cable installations.
T&D supply LV-HV Cable Accessories, Cable Jointing & Electrical Eqpt - we service UK and global contractors involved in cable installations, cable jointing, substation and electrical construction at LV, 11kV, 33kV and EHV. We export to utilities, power, construction, rail, mining, offshore, oil, gas and petrochemical industries.
Shrink Polymer Systems Catalogue
Our Catalogue which will include our full range of Cable Joints, Terminations and Accessories, please drop me a message for any specials.
Flexible Cables Solution
Prysmian offers a comprehensive range of flexible cable solutions with Class 5 conductors for fixed installations. With Flexible XLPE and Fire Performance cables, Prysmian has a full suite of cables for the entire Construction market.
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...Thorne & Derrick International
This document provides information on heat shrink terminations for low voltage PILC cables ranging from 0.6/1kV. It lists the part numbers, cable ranges, and tail lengths for single core and 3 core indoor/outdoor heat shrink terminations for XLPE and PILC cables ranging from 1.9/3.6kV. It also lists part numbers for 3/4 core PILC cable terminations ranging from 4-300mm2 with tail lengths of 600mm or 1000mm. An note indicates that for 4 core terminations, the last digit of the part number should read -4.3M 8425-8 Cold Shrink Tube
3M Cold Shrink Tube 8425-83M 8425-8 Cold Shrink Tube
Cold Shrink Tube Min Diameter 10.2mm
Cold Shrink Tube Max Diameter 20.8mm
Cold Shrink Tube Length 203mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
3M 8423-6 Cold Shrink Tube
3M Brand PST Cold Shrink Connector Insulators are open-ended, tubular rubber sleeves that are factory expanded and assembled onto a removable core. They are used to provide primary electrical insulation and physical protection for cable splices and connections rated up to 1000 volts. The insulators are made of EPDM rubber and are installed by removing the core, allowing the tube to shrink and form a waterproof seal around the cable or connection. They can be used for indoor, outdoor, overhead, buried, or submerged applications without additional heat or adhesives.
3M 8428-18 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables
3M Cold Shrink Tube 8428-183M 8428-18 Cold Shrink Tube
Cold Shrink Tube Min Diameter 24.0mm
Cold Shrink Tube Max Diameter 49.3mm
Cold Shrink Tube Length 457mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
3M 8429-12 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables
3M Cold Shrink Tube 8429-123M 8429-12 Cold Shrink Tube
Cold Shrink Tube Min Diameter 32.2mm
Cold Shrink Tube Max Diameter 67.8mm
Cold Shrink Tube Length 305mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors
3M 8429-6 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables
3M Cold Shrink Tube 8429-63M 8429-6 Cold Shrink Tube
Cold Shrink Tube Min Diameter 32.2mm
Cold Shrink Tube Max Diameter 67.8mm
Cold Shrink Tube Length 152mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
3M 8429-18 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables
3M Cold Shrink Tube 8429-123M 8429-18 Cold Shrink Tube
Cold Shrink Tube Min Diameter 32.2mm
Cold Shrink Tube Max Diameter 67.8mm
Cold Shrink Tube Length 457mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
3M 8430-18 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables 3M Cold Shrink Tube 8430-9 Cold Shrink Tube Min Diameter 42.6mm Cold Shrink Tube Max Diameter 93.7mm Cold Shrink Tube Length 229mm 3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core. •Cold shrink provides a constant radial pressure seal •No heat required with 3M Cold Shrink - 100% cold applied •No specialist cable jointing or heat shrink tools required •Quality - long term reliability •Moisture resistant for submersible and outdoor applications 3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
3M 8427-16 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables
3M Cold Shrink Tube 8427-163M 8427-16 Cold Shrink Tube
Cold Shrink Tube Min Diameter 17.5mm
Cold Shrink Tube Max Diameter 33.0mm
Cold Shrink Tube Length 406mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
3M 8428-24 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables
3M Cold Shrink Tube 8428-243M 8428-24 Cold Shrink Tube
Cold Shrink Tube Min Diameter 24.0mm
Cold Shrink Tube Max Diameter 49.3mm
Cold Shrink Tube Length 609mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
3M 8426-9 Cold Shrink Tube
3M Cold Shrink EPDM Tubes (8420 series) are open-ended rubber sleeves that are factory expanded and placed over a removable core. They are used to provide insulation and waterproof sealing for cable connections and terminations rated up to 1000 volts. The tubes are made of EPDM rubber and shrink to form a tight seal when the core is removed after positioning over the connection. They can be used for indoor, outdoor, overhead, buried, or submerged applications without additional heat or adhesives.
3M 8429-9 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables
3M Cold Shrink Tube 8429-93M 8429-9 Cold Shrink Tube
Cold Shrink Tube Min Diameter 32.2mm
Cold Shrink Tube Max Diameter 67.8mm
Cold Shrink Tube Length 229mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
3M 8428-12 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables
3M Cold Shrink Tube 8428-123M 8428-12 Cold Shrink Tube
Cold Shrink Tube Min Diameter 24.0mm
Cold Shrink Tube Max Diameter 49.3mm
Cold Shrink Tube Length 305mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
3M 8428-6 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables
3M Cold Shrink Tube 8428-63M 8428-6 Cold Shrink Tube
Cold Shrink Tube Min Diameter 24.0mm
Cold Shrink Tube Max Diameter 49.3mm
Cold Shrink Tube Length 152mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
3M 8427-6 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables
3M Cold Shrink Tube 8427-63M 8427-6 Cold Shrink Tube
Cold Shrink Tube Min Diameter 17.5mm
Cold Shrink Tube Max Diameter 33.0mm
Cold Shrink Tube Length 152mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
3M 8430-9 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables
3M Cold Shrink Tube 8430-93M 8430-9 Cold Shrink Tube
Cold Shrink Tube Min Diameter 42.6mm
Cold Shrink Tube Max Diameter 93.7mm
Cold Shrink Tube Length 229mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
Similar to Heat Shrink Joint Kit - 1.5-2.5sqmm 5Pair - SPA NHF 1.5-2.5-5PR (20)
SPS - LV MV Heat Shrink Cable Joints & Terminations (Full Catalogue)
SPS - LV MV Heat Shrink Cable Joints & Terminations (Full Catalogue)
Shrink Polymer Systems - Heat Shrink Cable Joints & Cable Terminations, Low ...
Shrink Polymer Systems - Heat Shrink Cable Joints & Cable Terminations, Low ...
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Recently uploaded (20)
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Heat Shrink Joint Kit - 1.5-2.5sqmm 5Pair - SPA NHF 1.5-2.5-5PR
- 1. Unit E3, Crown Way, Crown Park Industrial Estate, Rushden, Northants, UK, NN10 6FD Tel: +44 (0)1933 356758 Fax: +44 (0)1933 413821 Email: info@shrinkpolymersystems.co.uk Skype: shrinkpolymersystems www.shrinkpolymersystems.co.uk 47 Joints to Suit Multicore / Multipair XLPE / EPR Cables Part Number Cable Range Voltage SPA NHF 1.5-2.5-5 5 core 1.5-2.5mm² 600/1000V SPA NHF 1.5-2.5-7 7 core 1.5-2.5mm² 600/1000V SPA NHF 1.5-2.5-12 12 core 1.5-2.5mm² 600/1000V SPA NHF 1.5-2.5-19 19 core1.5-2.5mm² 600/1000V SPA NHF 1.5-2.5-27 27 core 1.5-2.5mm² 600/1000V SPA NHF 1.5-2.5-37 37 core1.5-2.5mm² 600/1000V SPA NHF 1.5-2.5-48 48 core 1.5-2.5mm² 600/1000V SPA NHF 1.5-2.5-61 61 core 1.5-2.5mm² 600/1000V Notes: 1. For non armoured joints, omit letter (A) from the part number 2. Add letter “PR” to end of part number to indicate multipair cables 3. If cable size is 0.5-1.5mm², insert 0.5-1.5mm after SPA NHF then number of cores Low Voltage Zero Halogen Cable Joints for Fire Resistant Cables • Designed for use where low smoke fume and fire resistance is essential • Designed and tested in leading UK fire testing laboratory, in accordance with the procedures specified in IEC 60331-21:1999 • Test report available • Joints available for all types of LV and MV cables Fire resistant cables are usually installed where vital electrical circuits are required to continue operating in the event of a fire. Shrink Polymer Systems can provide joint kits to suit these cable types for both single and multicore configurations. In addition to utilising LSF/Zero halogen heat shrink tubes and fire barrier tubes, the joints also incorporate mica tape over each of the cores. Mica tape is a slit silica tape constructed from 96% pure SiO2 silica fiber, coated one side with a pressure sensitive adhesive backing that facilitates installation. The adhesive decomposes at high temperatures, leaving a perfectly taped core Suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C), mica tape when combined with our proven zero halogen joint range, enables the joint to work in these extreme conditions. WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK