The document provides information on the occupational standards and qualifications for a Medical Laboratory Assistant in the Caribbean region. It outlines 9 mandatory units that must be completed to obtain the Caribbean Vocational Qualification (CVQ) in Health Care Services (Medical Laboratory Assistant) at Level 2, including units on communicating in the workplace, working in a culturally diverse environment, planning and organizing work, and applying health and safety procedures. The summary provides an overview of the key requirements to achieve this CVQ and how it benefits candidates, employers, and the Caribbean region by developing skills.
Health care services (dietary assistant) level 1ralstonmckenzie1
1. The document outlines the units required to achieve a Level 1 Caribbean Vocational Qualification (CVQ) in Health Care Services (Dietary Assistant). It lists 9 mandatory units covering topics like communication, cultural diversity, safety procedures, and meal preparation and distribution.
2. To obtain the CVQ, all mandatory units must be completed. The document provides legends to decode occupational standard codes and unit codes. It also describes the benefits of CVQs for candidates, employers, and the Caribbean region.
3. The CVQ provides a standardized qualification for dietary assistants in the Caribbean that facilitates free movement of labor and a more skilled workforce across countries.
Health care services (hospital attendant) level 1ralstonmckenzie1
This document outlines the qualifications and requirements for the occupation of a Hospital Attendant at the CVQ Level 1 in the Caribbean. It includes 16 mandatory units that must be completed to obtain the CVQ, covering topics like communication, cultural diversity, health and safety policies, cleaning, transporting clients, and basic first aid. The CVQ is designed to equip candidates with workplace skills and provide a recognized qualification for free movement of labor in the Caribbean.
This document provides the competency standards for the CVQ Level III in Allied Health - Geriatric Care qualification. It outlines the mandatory and elective units required to achieve this qualification, including the nominal training hours for each. The mandatory units cover skills such as basic communication, planning and organizing work, measurements and calculations, workplace safety, and providing care support to senior citizens. Elective units allow for specialization in areas like administration of nursing procedures, skin assessment, and entrepreneurial strategy development. Completing all mandatory units and a minimum of two level 2 and one level 3 elective is required to achieve this qualification.
We are providing the assignment help for all the subjects Globally. Our task specialists realize the fear that you experience when it comes to your Assignment Help For All Subjects. We providing solutions, PPTs, excel sheets and many more.
Visit our website:
https://www.moodlemonkey.com/
https://www.moodlemonkey.com/solution/
https://www.moodlemonkey.com/power-point-presentation/
https://www.moodlemonkey.com/about-us/
Training Plan for TM 1 Contact Center Services NC IImarlinfabaraquel
The document outlines a training plan for contact center services trainees with 10 training activities that include: 1) searching for industry partners, 2) sending proposal letters, 3) setting appointments, 4) presenting to partners, 5) conducting site visits, 6) finalizing training plans, 7) presenting plans for approval, 8) placing trainees, 9) coordinating and monitoring training, and 10) evaluating work-based training. The plan will provide computer-based and hands-on training over 3 cores: communicating effectively, performing customer service processes, and engaging customers, assessed through observation and oral questioning.
This document provides information about the Certificate IV in Business qualification, including:
- An overview of the role and job outcomes for those completing the qualification.
- Details of the 10 units that must be completed, including 1 core unit and 9 electives.
- Requirements for students to complete all assessments within 12 months of enrolling in an independent study format.
- Conditions and strategies for assessment submissions, including submitting original work and completing both written and verbal assessments for each unit.
- Foundation skills in English and numeracy levels required for each unit based on the Australian Core Skills Framework.
- Performance charts describing the reading, writing, oral communication, and numeracy skills levels for each unit.
Resume Sample For Quality Manager. Invest in yourHolly Bell
The document provides information about BestResumeHelp.com, a company that offers resume samples and help with crafting resumes. It discusses how their expert resume writers can create tailored resume samples that highlight qualifications for various industries and positions. It describes the types of resume samples they provide and outlines the process for ordering a customized resume sample.
Access the Unified communications technician occupational brief to see the minimum requirement that an apprentice needs to demonstrate for this standard.
Health care services (dietary assistant) level 1ralstonmckenzie1
1. The document outlines the units required to achieve a Level 1 Caribbean Vocational Qualification (CVQ) in Health Care Services (Dietary Assistant). It lists 9 mandatory units covering topics like communication, cultural diversity, safety procedures, and meal preparation and distribution.
2. To obtain the CVQ, all mandatory units must be completed. The document provides legends to decode occupational standard codes and unit codes. It also describes the benefits of CVQs for candidates, employers, and the Caribbean region.
3. The CVQ provides a standardized qualification for dietary assistants in the Caribbean that facilitates free movement of labor and a more skilled workforce across countries.
Health care services (hospital attendant) level 1ralstonmckenzie1
This document outlines the qualifications and requirements for the occupation of a Hospital Attendant at the CVQ Level 1 in the Caribbean. It includes 16 mandatory units that must be completed to obtain the CVQ, covering topics like communication, cultural diversity, health and safety policies, cleaning, transporting clients, and basic first aid. The CVQ is designed to equip candidates with workplace skills and provide a recognized qualification for free movement of labor in the Caribbean.
This document provides the competency standards for the CVQ Level III in Allied Health - Geriatric Care qualification. It outlines the mandatory and elective units required to achieve this qualification, including the nominal training hours for each. The mandatory units cover skills such as basic communication, planning and organizing work, measurements and calculations, workplace safety, and providing care support to senior citizens. Elective units allow for specialization in areas like administration of nursing procedures, skin assessment, and entrepreneurial strategy development. Completing all mandatory units and a minimum of two level 2 and one level 3 elective is required to achieve this qualification.
We are providing the assignment help for all the subjects Globally. Our task specialists realize the fear that you experience when it comes to your Assignment Help For All Subjects. We providing solutions, PPTs, excel sheets and many more.
Visit our website:
https://www.moodlemonkey.com/
https://www.moodlemonkey.com/solution/
https://www.moodlemonkey.com/power-point-presentation/
https://www.moodlemonkey.com/about-us/
Training Plan for TM 1 Contact Center Services NC IImarlinfabaraquel
The document outlines a training plan for contact center services trainees with 10 training activities that include: 1) searching for industry partners, 2) sending proposal letters, 3) setting appointments, 4) presenting to partners, 5) conducting site visits, 6) finalizing training plans, 7) presenting plans for approval, 8) placing trainees, 9) coordinating and monitoring training, and 10) evaluating work-based training. The plan will provide computer-based and hands-on training over 3 cores: communicating effectively, performing customer service processes, and engaging customers, assessed through observation and oral questioning.
This document provides information about the Certificate IV in Business qualification, including:
- An overview of the role and job outcomes for those completing the qualification.
- Details of the 10 units that must be completed, including 1 core unit and 9 electives.
- Requirements for students to complete all assessments within 12 months of enrolling in an independent study format.
- Conditions and strategies for assessment submissions, including submitting original work and completing both written and verbal assessments for each unit.
- Foundation skills in English and numeracy levels required for each unit based on the Australian Core Skills Framework.
- Performance charts describing the reading, writing, oral communication, and numeracy skills levels for each unit.
Resume Sample For Quality Manager. Invest in yourHolly Bell
The document provides information about BestResumeHelp.com, a company that offers resume samples and help with crafting resumes. It discusses how their expert resume writers can create tailored resume samples that highlight qualifications for various industries and positions. It describes the types of resume samples they provide and outlines the process for ordering a customized resume sample.
Access the Unified communications technician occupational brief to see the minimum requirement that an apprentice needs to demonstrate for this standard.
The job description summarizes the key responsibilities of a Biomedical Technician II position. The role involves repairing and maintaining medical equipment, water systems, and facilities to ensure patient safety. Duties include performing repairs according to procedures, troubleshooting issues, maintaining inventory, and participating in quality processes. The role also requires mentoring and training new technicians, and providing outstanding customer service both internally and externally. Candidates must have at least two years of relevant experience, an associate's degree is preferred, and various certifications are required within two years of employment.
The job description summarizes the key responsibilities of a Biomedical Technician II position. The role involves repairing and maintaining medical equipment, water systems, and facilities to ensure patient safety. Duties include performing repairs according to procedures, troubleshooting issues, maintaining inventory, and participating in quality processes. The role also requires mentoring and training new technicians, and providing outstanding customer service both internally and externally. Candidates must have at least two years of relevant experience, an associate's degree is preferred, and various certifications are required within two years of employment.
This document provides the competency standards for the CVQ Level II in Allied Health - Geriatric Caregiver qualification in the Caribbean. It outlines 22 mandatory and 13 elective units that must be completed to achieve this qualification, including units on communication skills, planning and organizing work, health care procedures, and providing care support to senior citizens. The units range from 10 to 70 hours and cover areas like communication, safety, sanitation, nutrition, recreation, medication assistance, and assessing skin conditions. Completing all mandatory units and a minimum of two level 2 and one level 3 elective is required to achieve this qualification.
This document discusses service quality gaps and how to close them. It identifies five key gaps: 1) between customer expectations and management perceptions, 2) between service quality standards and service delivery, 3) between service delivery and external communications about service, 4) between customer expectations and their perceptions of service received, and 5) between customer needs and what management thinks customers want. It provides strategies for closing each gap, such as using customer research to learn expectations, setting clear service standards, ensuring proper training and resources for employees, gaining customer input, and having realistic external communications.
We are providing the assignment help for all the subjects Globally. Our task specialists realize the fear that you experience when it comes to your Assignment Help For All Subjects. We providing solutions, PPTs, excel sheets and many more.
Visit our website:
https://www.moodlemonkey.com/
https://www.moodlemonkey.com/solution/
https://www.moodlemonkey.com/power-point-presentation/
https://www.moodlemonkey.com/about-us/
This document outlines a competency-based curriculum module for working in a team environment. It includes 5 learning outcomes: 1) Describe team role and scope, 2) Identify own role and responsibility within team, 3) Work as a team member, 4) Work effectively with colleagues, and 5) Work in a socially diverse environment. For each learning outcome, it lists assessment criteria, content areas, conditions, methodologies, and assessment methods. The overall focus is developing the skills, knowledge, and attitudes to effectively identify one's role and responsibilities and work as a contributing member of a diverse team.
Unit 3 maintain yourself in professional practiceUc Man
This document summarizes the key elements of maintaining professional practice. It covers continuing professional development, networking, and managing one's own work. Element 1 involves identifying professional standards and setting development objectives. Element 2 is about establishing and maintaining contacts that can benefit one's work. Element 3 covers setting work goals, prioritizing tasks, planning, and reviewing progress. The document provides examples of how to meet the performance criteria for each element through activities, products, reports, and witness testimony.
Unit 3 maintain yourself in professional practiceUc Man
This document summarizes the key elements of maintaining professional practice. It covers continuing professional development, networking, and managing one's own work. Element 1 involves identifying professional standards and setting development objectives. Element 2 is about establishing and maintaining contacts that can benefit one's work. Element 3 covers setting work goals, prioritizing tasks, planning, and reviewing progress. The overall unit aims to provide guidance on maintaining competence through skills development, networking, and self-management.
Pre course assessment- compliance webinar v2Irena Morgan
The document discusses compliance standards for vocational education and training (VET) providers in Australia. It explains that clear standards are important for accountability and ensuring providers understand what is required to be compliant. It then examines Standard 1 of the VET Quality Framework, which requires that training and assessment strategies meet industry and learner needs and the requirements of training packages. It provides guidance on determining learner needs, such as existing skills and experience, and ensuring appropriate support is provided to meet the requirements of the qualification.
This document provides information about a technical report writing course offered by Petronomics from May 15-16, 2014 in Lagos, Nigeria. The course aims to teach participants how to write clear, concise technical reports and communicate technical information effectively. It will cover various types of technical reports, developing an outline and structure, writing clearly, using visuals appropriately, and delivering oral presentations. The target audience are engineering and technical professionals. The fee for the course is N105,000 per participant and it can also be offered in-house.
Facility mgt and maintenace july, lagosPetro Nomics
This document provides information about a 3-day facility management and maintenance training course taking place in Lagos, Nigeria from July 1-3, 2015. The training will cover topics such as the role of facility management, asset management, health and safety, maintenance approaches, communication skills, and legal requirements. The goal is for participants to gain knowledge and skills related to facility management. The course fee is 126,000 Naira per participant and in-house training can also be provided. Interested individuals should contact the business development desk for registration.
This document provides information about a two-day technical report writing course offered by Petronomics in Lagos, Nigeria from May 15-16, 2014. The course aims to teach participants how to write clear, concise and well-structured technical reports for different audiences. It will cover topics such as determining the purpose and structure of reports, developing outlines, writing and editing for clarity, incorporating diagrams and visual elements, and delivering oral presentations based on written reports. The fee for the course is 105,000 Naira per participant and it is open to engineering professionals, technical personnel and managers.
1. The induction training program for new executive chefs at Portiere Hotel and Restaurant aims to help the chefs settle in comfortably and be productive in their roles.
2. Over three days, the chefs will be introduced to key staff, given an orientation of the facilities, and trained on their job responsibilities and expectations, safety procedures, and the company's policies.
3. The itinerary includes introductions, orientation, training on the job description and responsibilities, employment terms and policies, safety drills, and service standards to prepare the chefs for their work.
Sara Anis Kamel is a qualified and motivated pharmacist seeking a career with a reputable organization where she can utilize her skills and experience. She has over 15 years of experience in training coordination, event planning, teaching, and inventory management. Some of her achievements include reducing training and event budgets by 20% and 27%, respectively, and completing 98% of assigned objectives. Kamel holds a BSc in Pharmacy from Misr International University and a Human Resources Management diploma from AUC. She is fluent in English and has excellent computer skills.
This document provides information about a maintenance planning and scheduling course taking place in Lagos, Nigeria from July 2-4, 2014. The course will provide participants with essential physical asset management skills and teach best practices for maintenance planning and scheduling. It will cover topics such as maintenance strategy, work planning, scheduling and performance indicators. The fee for the 3-day course is N126,000 per participant and organizations can also request customized in-house training. Interested individuals should contact Petronomics for registration details.
This document provides information about a maintenance planning and scheduling course taking place in Lagos, Nigeria from July 2-4, 2014. The course will provide participants with essential physical asset management skills and teach best practices for maintenance planning and scheduling. It will cover topics such as maintenance strategy, work planning, scheduling and performance indicators. The fee for the 3-day course is N126,000 per participant and organizations can also request customized in-house training. Interested individuals should contact the business development desk for registration details.
This document provides information about a maintenance planning and scheduling course taking place in Lagos, Nigeria from July 2-4, 2014. The course will provide participants with essential physical asset management skills and teach best practices for maintenance planning and scheduling. It will cover topics such as maintenance strategy, work planning, scheduling and performance indicators. The fee for the 3-day course is 126,000 Naira per participant and organizations can also request customized in-house training. Interested individuals should contact the business development desk for registration details.
This document provides information about a maintenance planning and scheduling course taking place in Lagos, Nigeria from July 2-4, 2014. The course will provide participants with essential physical asset management skills and teach best practices for maintenance planning and scheduling. It will cover topics such as maintenance strategy, work planning, scheduling and performance indicators. The fee for the 3-day course is 126,000 Naira per participant and both in-house and public training options are available. The training company, Petronomics, aims to bridge competency gaps in the energy industry through various learning programs.
This document contains a resume for a human resources professional with over 20 years of experience in recruitment and staffing roles in the Philippines. The resume outlines experience recruiting for various industries, conducting interviews, training employees, and providing counseling. Key skills include recruitment, interviewing, Microsoft Office, and employee coaching. Educational background includes a Bachelor's degree in Psychology.
This particular slides consist of- what is Pneumothorax,what are it's causes and it's effect on body, risk factors, symptoms,complications, diagnosis and role of physiotherapy in it.
This slide is very helpful for physiotherapy students and also for other medical and healthcare students.
Here is a summary of Pneumothorax:
Pneumothorax, also known as a collapsed lung, is a condition that occurs when air leaks into the space between the lung and chest wall. This air buildup puts pressure on the lung, preventing it from expanding fully when you breathe. A pneumothorax can cause a complete or partial collapse of the lung.
PET CT beginners Guide covers some of the underrepresented topics in PET CTMiadAlsulami
This lecture briefly covers some of the underrepresented topics in Molecular imaging with cases , such as:
- Primary pleural tumors and pleural metastases.
- Distinguishing between MPM and Talc Pleurodesis.
- Urological tumors.
- The role of FDG PET in NET.
More Related Content
Similar to Health care services (medical laboratory assistant) level 2
The job description summarizes the key responsibilities of a Biomedical Technician II position. The role involves repairing and maintaining medical equipment, water systems, and facilities to ensure patient safety. Duties include performing repairs according to procedures, troubleshooting issues, maintaining inventory, and participating in quality processes. The role also requires mentoring and training new technicians, and providing outstanding customer service both internally and externally. Candidates must have at least two years of relevant experience, an associate's degree is preferred, and various certifications are required within two years of employment.
The job description summarizes the key responsibilities of a Biomedical Technician II position. The role involves repairing and maintaining medical equipment, water systems, and facilities to ensure patient safety. Duties include performing repairs according to procedures, troubleshooting issues, maintaining inventory, and participating in quality processes. The role also requires mentoring and training new technicians, and providing outstanding customer service both internally and externally. Candidates must have at least two years of relevant experience, an associate's degree is preferred, and various certifications are required within two years of employment.
This document provides the competency standards for the CVQ Level II in Allied Health - Geriatric Caregiver qualification in the Caribbean. It outlines 22 mandatory and 13 elective units that must be completed to achieve this qualification, including units on communication skills, planning and organizing work, health care procedures, and providing care support to senior citizens. The units range from 10 to 70 hours and cover areas like communication, safety, sanitation, nutrition, recreation, medication assistance, and assessing skin conditions. Completing all mandatory units and a minimum of two level 2 and one level 3 elective is required to achieve this qualification.
This document discusses service quality gaps and how to close them. It identifies five key gaps: 1) between customer expectations and management perceptions, 2) between service quality standards and service delivery, 3) between service delivery and external communications about service, 4) between customer expectations and their perceptions of service received, and 5) between customer needs and what management thinks customers want. It provides strategies for closing each gap, such as using customer research to learn expectations, setting clear service standards, ensuring proper training and resources for employees, gaining customer input, and having realistic external communications.
We are providing the assignment help for all the subjects Globally. Our task specialists realize the fear that you experience when it comes to your Assignment Help For All Subjects. We providing solutions, PPTs, excel sheets and many more.
Visit our website:
https://www.moodlemonkey.com/
https://www.moodlemonkey.com/solution/
https://www.moodlemonkey.com/power-point-presentation/
https://www.moodlemonkey.com/about-us/
This document outlines a competency-based curriculum module for working in a team environment. It includes 5 learning outcomes: 1) Describe team role and scope, 2) Identify own role and responsibility within team, 3) Work as a team member, 4) Work effectively with colleagues, and 5) Work in a socially diverse environment. For each learning outcome, it lists assessment criteria, content areas, conditions, methodologies, and assessment methods. The overall focus is developing the skills, knowledge, and attitudes to effectively identify one's role and responsibilities and work as a contributing member of a diverse team.
Unit 3 maintain yourself in professional practiceUc Man
This document summarizes the key elements of maintaining professional practice. It covers continuing professional development, networking, and managing one's own work. Element 1 involves identifying professional standards and setting development objectives. Element 2 is about establishing and maintaining contacts that can benefit one's work. Element 3 covers setting work goals, prioritizing tasks, planning, and reviewing progress. The document provides examples of how to meet the performance criteria for each element through activities, products, reports, and witness testimony.
Unit 3 maintain yourself in professional practiceUc Man
This document summarizes the key elements of maintaining professional practice. It covers continuing professional development, networking, and managing one's own work. Element 1 involves identifying professional standards and setting development objectives. Element 2 is about establishing and maintaining contacts that can benefit one's work. Element 3 covers setting work goals, prioritizing tasks, planning, and reviewing progress. The overall unit aims to provide guidance on maintaining competence through skills development, networking, and self-management.
Pre course assessment- compliance webinar v2Irena Morgan
The document discusses compliance standards for vocational education and training (VET) providers in Australia. It explains that clear standards are important for accountability and ensuring providers understand what is required to be compliant. It then examines Standard 1 of the VET Quality Framework, which requires that training and assessment strategies meet industry and learner needs and the requirements of training packages. It provides guidance on determining learner needs, such as existing skills and experience, and ensuring appropriate support is provided to meet the requirements of the qualification.
This document provides information about a technical report writing course offered by Petronomics from May 15-16, 2014 in Lagos, Nigeria. The course aims to teach participants how to write clear, concise technical reports and communicate technical information effectively. It will cover various types of technical reports, developing an outline and structure, writing clearly, using visuals appropriately, and delivering oral presentations. The target audience are engineering and technical professionals. The fee for the course is N105,000 per participant and it can also be offered in-house.
Facility mgt and maintenace july, lagosPetro Nomics
This document provides information about a 3-day facility management and maintenance training course taking place in Lagos, Nigeria from July 1-3, 2015. The training will cover topics such as the role of facility management, asset management, health and safety, maintenance approaches, communication skills, and legal requirements. The goal is for participants to gain knowledge and skills related to facility management. The course fee is 126,000 Naira per participant and in-house training can also be provided. Interested individuals should contact the business development desk for registration.
This document provides information about a two-day technical report writing course offered by Petronomics in Lagos, Nigeria from May 15-16, 2014. The course aims to teach participants how to write clear, concise and well-structured technical reports for different audiences. It will cover topics such as determining the purpose and structure of reports, developing outlines, writing and editing for clarity, incorporating diagrams and visual elements, and delivering oral presentations based on written reports. The fee for the course is 105,000 Naira per participant and it is open to engineering professionals, technical personnel and managers.
1. The induction training program for new executive chefs at Portiere Hotel and Restaurant aims to help the chefs settle in comfortably and be productive in their roles.
2. Over three days, the chefs will be introduced to key staff, given an orientation of the facilities, and trained on their job responsibilities and expectations, safety procedures, and the company's policies.
3. The itinerary includes introductions, orientation, training on the job description and responsibilities, employment terms and policies, safety drills, and service standards to prepare the chefs for their work.
Sara Anis Kamel is a qualified and motivated pharmacist seeking a career with a reputable organization where she can utilize her skills and experience. She has over 15 years of experience in training coordination, event planning, teaching, and inventory management. Some of her achievements include reducing training and event budgets by 20% and 27%, respectively, and completing 98% of assigned objectives. Kamel holds a BSc in Pharmacy from Misr International University and a Human Resources Management diploma from AUC. She is fluent in English and has excellent computer skills.
This document provides information about a maintenance planning and scheduling course taking place in Lagos, Nigeria from July 2-4, 2014. The course will provide participants with essential physical asset management skills and teach best practices for maintenance planning and scheduling. It will cover topics such as maintenance strategy, work planning, scheduling and performance indicators. The fee for the 3-day course is N126,000 per participant and organizations can also request customized in-house training. Interested individuals should contact Petronomics for registration details.
This document provides information about a maintenance planning and scheduling course taking place in Lagos, Nigeria from July 2-4, 2014. The course will provide participants with essential physical asset management skills and teach best practices for maintenance planning and scheduling. It will cover topics such as maintenance strategy, work planning, scheduling and performance indicators. The fee for the 3-day course is N126,000 per participant and organizations can also request customized in-house training. Interested individuals should contact the business development desk for registration details.
This document provides information about a maintenance planning and scheduling course taking place in Lagos, Nigeria from July 2-4, 2014. The course will provide participants with essential physical asset management skills and teach best practices for maintenance planning and scheduling. It will cover topics such as maintenance strategy, work planning, scheduling and performance indicators. The fee for the 3-day course is 126,000 Naira per participant and organizations can also request customized in-house training. Interested individuals should contact the business development desk for registration details.
This document provides information about a maintenance planning and scheduling course taking place in Lagos, Nigeria from July 2-4, 2014. The course will provide participants with essential physical asset management skills and teach best practices for maintenance planning and scheduling. It will cover topics such as maintenance strategy, work planning, scheduling and performance indicators. The fee for the 3-day course is 126,000 Naira per participant and both in-house and public training options are available. The training company, Petronomics, aims to bridge competency gaps in the energy industry through various learning programs.
This document contains a resume for a human resources professional with over 20 years of experience in recruitment and staffing roles in the Philippines. The resume outlines experience recruiting for various industries, conducting interviews, training employees, and providing counseling. Key skills include recruitment, interviewing, Microsoft Office, and employee coaching. Educational background includes a Bachelor's degree in Psychology.
Similar to Health care services (medical laboratory assistant) level 2 (20)
This particular slides consist of- what is Pneumothorax,what are it's causes and it's effect on body, risk factors, symptoms,complications, diagnosis and role of physiotherapy in it.
This slide is very helpful for physiotherapy students and also for other medical and healthcare students.
Here is a summary of Pneumothorax:
Pneumothorax, also known as a collapsed lung, is a condition that occurs when air leaks into the space between the lung and chest wall. This air buildup puts pressure on the lung, preventing it from expanding fully when you breathe. A pneumothorax can cause a complete or partial collapse of the lung.
PET CT beginners Guide covers some of the underrepresented topics in PET CTMiadAlsulami
This lecture briefly covers some of the underrepresented topics in Molecular imaging with cases , such as:
- Primary pleural tumors and pleural metastases.
- Distinguishing between MPM and Talc Pleurodesis.
- Urological tumors.
- The role of FDG PET in NET.
Let's Talk About It: Breast Cancer (What is Mindset and Does it Really Matter?)bkling
Your mindset is the way you make sense of the world around you. This lens influences the way you think, the way you feel, and how you might behave in certain situations. Let's talk about mindset myths that can get us into trouble and ways to cultivate a mindset to support your cancer survivorship in authentic ways. Let’s Talk About It!
At Apollo Hospital, Lucknow, U.P., we provide specialized care for children experiencing dehydration and other symptoms. We also offer NICU & PICU Ambulance Facility Services. Consult our expert today for the best pediatric emergency care.
For More Details:
Map: https://cutt.ly/BwCeflYo
Name: Apollo Hospital
Address: Singar Nagar, LDA Colony, Lucknow, Uttar Pradesh 226012
Phone: 08429021957
Opening Hours: 24X7
Comprehensive Rainy Season Advisory: Safety and Preparedness Tips.pdfDr Rachana Gujar
The "Comprehensive Rainy Season Advisory: Safety and Preparedness Tips" offers essential guidance for navigating rainy weather conditions. It covers strategies for staying safe during storms, flood prevention measures, and advice on preparing for inclement weather. This advisory aims to ensure individuals are equipped with the knowledge and resources to handle the challenges of the rainy season effectively, emphasizing safety, preparedness, and resilience.
The best massage spa Ajman is Chandrima Spa Ajman, which was founded in 2023 and is exclusively for men 24 hours a day. As of right now, our parent firm has been providing massage services to over 50,000+ clients in Ajman for the past 10 years. It has about 8+ branches. This demonstrates that Chandrima Spa Ajman is among the most reasonably priced spas in Ajman and the ideal place to unwind and rejuvenate. We provide a wide range of Spa massage treatments, including Indian, Pakistani, Kerala, Malayali, and body-to-body massages. Numerous massage techniques are available, including deep tissue, Swedish, Thai, Russian, and hot stone massages. Our massage therapists produce genuinely unique treatments that generate a revitalized sense of inner serenely by fusing modern techniques, the cleanest natural substances, and traditional holistic therapists.
Joker Wigs has been a one-stop-shop for hair products for over 26 years. We provide high-quality hair wigs, hair extensions, hair toppers, hair patch, and more for both men and women.
LGBTQ+ Adults: Unique Opportunities and Inclusive Approaches to CareVITASAuthor
This webinar helps clinicians understand the unique healthcare needs of the LGBTQ+ community, primarily in relation to end-of-life care. Topics include social and cultural background and challenges, healthcare disparities, advanced care planning, and strategies for reaching the community and improving quality of care.
R3 Stem Cell Therapy: A New Hope for Women with Ovarian FailureR3 Stem Cell
Discover the groundbreaking advancements in stem cell therapy by R3 Stem Cell, offering new hope for women with ovarian failure. This innovative treatment aims to restore ovarian function, improve fertility, and enhance overall well-being, revolutionizing reproductive health for women worldwide.
Chandrima Spa Ajman is one of the leading Massage Center in Ajman, which is open 24 hours exclusively for men. Being one of the most affordable Spa in Ajman, we offer Body to Body massage, Kerala Massage, Malayali Massage, Indian Massage, Pakistani Massage Russian massage, Thai massage, Swedish massage, Hot Stone Massage, Deep Tissue Massage, and many more. Indulge in the ultimate massage experience and book your appointment today. We are confident that you will leave our Massage spa feeling refreshed, rejuvenated, and ready to take on the world.
Visit : https://massagespaajman.com/
Call : 052 987 1315
MBC Support Group for Black Women – Insights in Genetic Testing.pdfbkling
Christina Spears, breast cancer genetic counselor at the Ohio State University Comprehensive Cancer Center, joined us for the MBC Support Group for Black Women to discuss the importance of genetic testing in communities of color and answer pressing questions.
About this webinar: This talk will introduce what cancer rehabilitation is, where it fits into the cancer trajectory, and who can benefit from it. In addition, the current landscape of cancer rehabilitation in Canada will be discussed and the need for advocacy to increase access to this essential component of cancer care.
Health care services (medical laboratory assistant) level 2
1. Approved @ 2016 Caribbean Community (CARICOM)
Occupational Standards for Caribbean Vocational Qualifications (CVQ)
CCHSML2011 CVQ Level 2 - HEALTH CARE SERVICES (MEDICAL
LABORATORY ASSISTANT)
Unit Number Unit Title Requirement
HS00300 Communicate in the workplace Mandatory
HS00301 Work in a culturally diverse environment Mandatory
CSACOR0021A Plan and organise work Mandatory
HS00326 Apply workplace health, safety and security procedures Mandatory
HS00340 Use basic laboratory tools and equipment Mandatory
HS00341 Maintain work stations and equipment in a
medical laboratory
Mandatory
HS00342 Use computer technology for laboratory applications Mandatory
HS00343 Maintain stock levels in a medical laboratory Mandatory
HS00344 Prepare medical specimen for testing activities Mandatory
HS00345 Prepare laboratory solutions, stains and media Mandatory
To obtain a Caribbean Vocational Qualification (CVQ) all Mandatory Units must be achieved.
Legend to Occupational Standard code
Example: CCHSML2011
CCHSML2011
CARICOM Code Occupational Number
Sector Qualification Level
Occupational Area
Key: CC – CARICOM; HS – Health Services; ML – Medical Laboratory Assistant; 2 - Level 2; 011 -
Numerical sequence
2. Approved @ 2016 Caribbean Community (CARICOM)
Legend to Unit Code
Example: HS00300
HS00300
Occupational Area
Unit Number
Key: HS – Health Sector; 00300 – unit #
Country of origin: Trinidad and Tobago
3. Approved @ 2016 Caribbean Community (CARICOM)
Qualification Overview
Occupational Standards can also be used to:
Prepare job descriptions and specifications
Determine recruitment criteria
Appraise staff performance objectively
Identify skill and training gaps and needs
Conduct labour market analyses
Develop curriculum
Assess the effectiveness of training programmes
Determine compensation and rewards
The benefits of acquiring the CVQ to Candidates
Provide a basis for articulation and accreditation
Provides a broad-based preparation for employment
Is an alternative route to further / higher education
Complements and has parallel standing with academic qualifications
Provides enhanced employability and higher earning potential
Facilitates an apprenticeship with actual work experience
Equips candidates with the knowledge, skills and attitudes for the workplace
Past work experience and skills can count towards achieving the CVQ
Allows for continuity whereby if a candidate cannot complete the CVQ at a centre or school,
they can continue at another approved centre
CVQ’s are recognized qualifications and facilitates free movement of labour throughout
CARICOM
The benefits of the CVQ to Employers
Provides a larger cadre of skilled employees/candidates to choose from
Reduces cost of recruiting and selecting the ideal job candidate
Reduces cost for training workers
Ensures higher levels of productivity
The benefits of the CVQ to the Caribbean region:
Produces a higher skilled workforce that is ready to adapt to ever-changing global demands
Provides greater access for persons to achieve higher qualifications
Contributes to the region’s human resource capacity development
4. HS00300 Communicate in the Workplace
Unit Page 1 of 4
HS00300 Communicate in the Workplace
Unit Descriptor: This unit deals with the skills and knowledge required to communicate
effectively with customers and colleagues in the health sector. It includes
good interpersonal and customer service skills required to deal with
persons from culturally diverse backgrounds.
ELEMENTS PERFORMANCE CRITERIA
Candidates must be able to:
1
Maintain professionalism
1.1 Observe appropriate dress code, presentation and
demeanor according to workplace policy
1.2 Follow personal hygiene procedures according to workplace
policy
1.3 Maintain professional integrity at all times according to
workplace policy
2
Communicate with customers
1.4 Apply workplace policies and procedures to prepare for and
carry out work
and colleagues
2.1 Conduct communications with customers and colleagues in
a respectful, professional and friendly manner, taking into
account cultural and social differences
2.2 Use appropriate communication mode in accordance with
workplace guidelines
2.3 Interpret and use basic industry terms as required in the
workplace, and clarify with supervisor if necessary
2.4 Communicate through use of gestures or simple words
where language barriers and seek assistance from
supervisor, if necessary
2.5 Convey messages considering effect of personal body
language according to workplace guidelines
2.6 Use active listening and questioning techniques to ensure
effective two-way communication according to workplace
guidelines
2.7 Operate telephone system and use appropriate telephone
etiquette when dealing with callers in accordance with
workplace procedures
3 Deal with conflict 3.1
Identify and manage challenging or difficult behavior
according to workplace procedures and with the assistance
of the supervisor
5. HS00300 Communicate in the Workplace
Unit Page 2 of 4
3.2 Identify potential and existing conflicts and seek solutions
and assistance from colleagues or supervisor, where
required
3.3
Make efforts to resolve misunderstandings, taking into
account cultural and social differences
3.4 Refer issues and problems to the supervisor or appropriate
personnel for follow up in accordance with workplace
procedures
4 Work in a team 4.1 Identify work team goals with other team members
according to workplace policy
4.2 Identify, prioritise and complete individual tasks within
designated time frames and supervisor’s instructions
4.3 Offer assistance to colleagues to ensure designated work
goals are met according to workplace guidelines
4.4 Seek assistance from supervisor or appropriate personnel to
handle challenges of working in a team
5 Interpret and complete
workplace documentation
5.1 Read and interpret workplace documentation and clarify with
supervisor if necessary
5.2
Complete forms and documentation in a clear, and concise
manner in accordance with workplace procedures
RANGE STATEMENT
All range statements must be assessed:
1. Customers include but not limited to:
internal
external
2. Communication modes may include
but are not limited to:
verbal and non-verbal language
constructive feedback
active listening
questioning to clarify and confirm
understanding
use of positive, confident and
cooperative language
use of language and concepts
appropriate to individual social and
cultural differences
control of tone of voice
4. Communication equipment include but
not limited to:
telephone
computer
5. Manage appropriately includes but not
limited to:
managing emotions
defusing anger
clarifying the issues
maintaining composure and
professional attitude
providing support
seeking assistance
6. Workplace guidelines includes but not
limited to:
6. HS00300 Communicate in the Workplace
Unit Page 3 of 4
body language
use of telephones (including mobile)
email
3. Cultural and social differences includes
but not limited to:
language spoken
non-verbal behaviour
work ethics
personal grooming
customs
religious practices
special needs
income
race
language
disabilities
family structure
gender
age
levels of formality/informality
guidelines and procedures
mission statements
codes of practice
7. Workplace documentation includes but
not limited to:
notices
letters
notes
labels
recipes
menus
records
orders
reports
e-mail communication
UNDERPINNING KNOWLEDGE & SKILLS
Candidates must know:
1. why is it important to maintain professionalism in the workplace
2. what are the basic principles of effective communication
3. what are established communication channels
4. what are the barriers to good communication and how to overcome these barriers
5. what are the cultural differences that exist in the workplace
6. how to deal with clients and customers of various cultural backgrounds
7. what is the importance of teamwork
8. what documents are used in the workplace for communication
EVIDENCE GUIDE
(1) Critical Aspects of Evidence
Evidence should include a demonstrated ability to:
a. maintain professionalism
b. communicate effectively with customers and colleagues
c. work in a team
d. deal with conflict
e. interpret and complete workplace documents
7. HS00300 Communicate in the Workplace
Unit Page 4 of 4
(2) Method of Assessment
Assessors should gather a range of evidence, over a period of time, which is valid, sufficient
and authentic. Evidence should be gathered through a variety of ways including direct
observation, oral questioning, examination of portfolio, and simulation. Questioning
techniques should not require language, literacy and numeracy skills beyond those required
in this unit competency. The candidate must have access to all tools, equipment, materials
and documentation required. The candidate must be permitted to refer to any relevant
workplace procedures, manufacturer’s specifications, codes, standards, manuals and
reference materials.
(3) Context of Assessment
This unit may be assessed on the job or off the job. Where assessment is done off the job, an
appropriate simulation must be used where the range of conditions reflects realistic
workplace situations. The competencies covered by this unit would be demonstrated by an
individual working as part of a team. The assessment environment should not disadvantage
the candidate.
8. HS00301 Work in a Culturally Diverse Environment
Unit Page 1 of 3
HS00301 Work in a Culturally Diverse Environment
Unit Descriptor: This unit deals with the skills and knowledge required by persons
working in the health sector and involves the use of interpersonal,
communication and customer service skills. It includes the cultural
awareness required for working with customers and colleagues from
culturally diverse backgrounds.
ELEMENTS PERFORMANCE CRITERIA
Candidates must be able to:
1. Maintain personal presentation 1.1 Observe appropriate dress code, presentation and
demeanor according to workplace policy
1.2 Follow personal hygiene procedures according to
workplace policy and Infection Prevention and Control
guidelines
2. Work with customers and
colleagues from diverse backgr
2.1
ounds
Conduct communications with customers and colleagues
in an open, professional and friendly manner, taking into
account cultural differences
2.2 Use appropriate language and tone according to
workplace guidelines
2.3 Communicate through use of gestures or simple words
in the other person’s language where language barriers exist
2.4 Convey messages considering effect of personal body
language according to workplace guidelines
2.5 Use active listening and questioning techniques to
ensure effective two-way communication according to
workplace guidelines
2.6 Identify potential and existing conflicts and seek solutions
and assistance from colleagues or supervisor, where
required
3. Handle cross cultural
misunderstandings
3.1 Identify and handle challenging or difficult behaviour
and manage appropriately according to workplace
procedures and with the assistance of the supervisor
3.2 Make efforts to resolve misunderstandings, taking into
account cultural considerations
3.3 Refer issues and problems to the supervisor or appropriate
personnel for follow up
9. HS00301 Work in a Culturally Diverse Environment
Unit Page 2 of 3
3.4 Maintain professional integrity at all times according to
workplace policy
4. Work in a team 4.1 Identify work team goals with other team members
according to workplace policy
4.2 Identify, prioritise and complete individual tasks within
designated time frames
4.3 Seek assistance from supervisor or appropriate
personnel when required
4.4 Offer assistance to colleagues to ensure designated work
goals are met according to workplace guidelines
4.5 Acknowledge feedback and information from supervisor
or appropriate personnel
RANGE STATEMENTS
All range statements must be assessed:
1. Customers include:
members of the local community
members of the public
non-nationals
visitors from other health facilities
legal authorities
supervisors
line staff
various other health care staff
2. Manage appropriately includes:
managing emotions
defusing anger
clarifying the issues
attending to client needs
maintaining composure and professional
attitude
providing support
seeking assistance
3. Cultural and social differences include:
language spoken
non-verbal behaviour
work ethics
personal grooming
customs
religious practices
special needs
income
race
language
disabilities
family structure
gender
age
levels of formality/informality
4. Workplace guidelines include:
guidelines and procedures
mission statements
codes of practice
10. HS00301 Work in a Culturally Diverse Environment
Unit Page 3 of 3
UNDERPINNING KNOWLEDGE & SKILLS
Candidates must know and understand:
1. what are the organisations policies, procedures and guidelines
2. what are the principles that underpin cultural awareness
3. what are various communication styles
4. who are internal and external customers
5. what is the importance of teamwork principles
6. what are effective communication strategies
7. what are the various modes of communication appropriate to therapeutic practice
8. where to seek assistance if necessary
9. how to communicate effectively including:
active listening
clarify and ascertain correct meanings from communication
clear, concise and correct written and verbal communication
communicate on a one-to-one and group basis
correct presentation of correspondence
establish rapport
passing on verbal and written messages
use correct grammar, spelling and punctuation
10. how to respond appropriately to a range of clients in a range of situations and of various cultural
backgrounds
11. how to use listening skills and questioning techniques
12. how to use various styles of communication (technical or non-technical/ verbal or non-verbal)
13. how to handle difficult situations
14. how to respond appropriately to special needs
EVIDENCE GUIDE
(1) Critical Aspects of Evidence
Evidence should include a demonstrated ability to:
a. communicate effectively with customers and colleagues of various cultural groups
b. work in a team
c. respond effectively to a range of different customer service situations
(2) Method of Assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence
can be gathered through a variety of ways including direct observation, portfolio, supervisor’s reports,
project work, samples and questioning. Questioning techniques should not require language, literacy
and numeracy skills beyond those required in this unit of competency. The candidate must have access
to all tools, equipment, materials and documentation required. The candidate must be permitted to
refer to any relevant workplace procedures, product and manufacturing specifications, codes,
standards, manuals and reference materials.
(3) Context of Assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where
assessment occurs off the job, that is the candidate is not in productive work, then an appropriate
simulation must be used where the range of conditions reflects realistic workplace situations. The
competencies covered by this unit would be demonstrated by an individual working alone or as part of
a team. The assessment environment should not disadvantage the candidate.
11. CSACOR0021A Plan and organise work
Copyright 2007 Caribbean Association of National Training Agencies (CANTA) Page 1 of 4
All rights reserved. No part of this document may be reproduced in any form or by any means without the prior permission of
the publishers.
CSACOR0021A: Plan and organise work
Competency Descriptor: This unit deals with the skills and knowledge required to effectively
plan and organise work assignments, and applies to all individuals
working in the allied health sector
ELEMENT OF COMPETENCY PERFORMANCE CRITERIA
1. Identify work requirements 1.1 Instructions for work schedule and performance and quality
assurance requirements are received understood and
clarified where necessary.
2. Plan process to complete work 2.1 Tasks are identified, prioritised and sequenced to achieve
effective completion of work.
3. Select tools and equipment 3.1 Personal protective equipment is correctly identified and
selected to suit job requirements.
3.2 Appropriate tools and equipment are identified and selected
for required service.
4. Demonstrate safe and efficient
sequence of work
4.1 Service is provided safely in a logical and efficient sequence.
4.2 Tools, supplies and equipment are safely stored when not in
immediate use.
5. Report outcomes 5.1 Verbal report is given to appropriate person on completion of
service and relevant client details entered on database.
6. Clean up 6.1 Unused materials are safely stored at appropriate area.
6.2 Empty containers and waste material are removed from
service area.
6.3 Service area is left clean, safe and secure on completion.
6.4 Tools and equipment are cleaned, maintained and stored.
12. CSACOR0021A Plan and organise work
Copyright 2007 Caribbean Association of National Training Agencies (CANTA) Page 2 of 4
All rights reserved. No part of this document may be reproduced in any form or by any means without the prior permission of
the publishers.
RANGE STATEMENT
Work organisation sequence may range from receiving instructions, to carrying out task, to cleaning up
task.
Work plan may be either written or verbal and may include the following:
preparation of work area
selections of tools and equipment
handling of materials, tools and equipment
housekeeping requirements
Work schedule may be carried out in a singular application or in a team situation.
Work schedule and performance may have to adhere to quality assurance policy and procedures.
EVIDENCE GUIDE
Competency is to be demonstrated by safe and effective preparation using any of the range of work
sequences listed within the range of variables statement relative to the work environment.
(1) Critical Aspects and Evidence
It is essential that competence is observed in the following aspects:
indicate compliance with Occupational Health and Safety regulations applicable to care facility
indicate compliance with organisational policies and procedures including quality assurance
requirements
carry out correct procedures prior to and during the provision of service to clients/patients
communicate to enable efficient individual/organisational planning of work
(2) Pre-requisite Relationship of Units
Nil
13. CSACOR0021A Plan and organise work
Page 3 of 4Copyright 2007 Caribbean Association of National Training Agencies (CANTA)
All rights reserved. No part of this document may be reproduced in any form or by any means without the prior permission of
the publishers.
(3) Underpinning Knowledge and Skills
Knowledge
A knowledge of:
policies and procedures in regard to
planning and organising allocated
duties
care facility and equipment safety
requirements
equipment
materials appropriate to the task
products handling
quality assurance
Skills
The ability to:
follow instructions, perform tasks
according to care facility procedures,
plan and prioritise tasks
use equipment correctly
prepare and maintain work area
select and use products according to
manufacturer’s instructions
apply quality assurance
(4) Resource Implications
The following resources should be made available:
access to an equip care facility with patients/clients
(5) Method of Assessment
Evidence may be collected in a variety of ways including:
direct observation
oral questioning
written test
supporting statement from supervisor or previous employer
case study
Competency in this unit may be demonstrated concurrently.
(6) Context of Assessment
This unit must be assessed through practical demonstration on -the-job or in a simulated workplace
environment dealing with a variety of services and a range of communication processes with clients
result until competency is achieved.
The underpinning knowledge may be assessed off -the-job with the use of written or verbal items
inclusive of short answer or case studies.
14. CSACOR0021A Plan and organise work
Page 4 of 4Copyright 2007 Caribbean Association of National Training Agencies (CANTA)
All rights reserved. No part of this document may be reproduced in any form or by any means without the prior permission of
the publishers.
CRITICAL EMPLOYABILITYSKILLS
Three levels of performance denote level of competency required to perform a task. These levels do not
relate to the NCTVET Qualification Framework. They relate to the seven areas of generic competency that
underpin effective workplace practices.
Levels of Competency
Level 1. Level 2. Level 3.
Carries out established
processes
Makes judgement of
quality using given criteria
Manages process
Selects the criteria for the
evaluation process
Establishes principles and
procedures
Evaluates and reshapes process
Establishes criteria for evaluation
Collecting, analysing and organising ideas and information Level 1
Communicating ideas and information Level 1
Planning and organising activities Level 1
Working with others and in teams Level 1
Use mathematical ideas & techniques Level 1
Solve problems Level 1
Using technology Level 1
Please refer to the Assessment Guidelines for advice on how to use the Critical Employ ability Skills.
15. HS00326 Apply Workplace Health, Safety and Security Procedures
Unit Page 1 of 4
HS00326 Apply Workplace Health, Safety and Security Procedures
Unit Descriptor:
This unit deals with the skills and knowledge required to apply
workplace health, safety and security policies and procedures in
a health care environment. It includes the ability to incorporate
safe work practices into all workplace activities, deal with
emergency situations and contribute to the prevention of
infection in the workplace.
ELEMENTS PERFORMANCE CRITERIA
Candidates must be able to:
1
Maintain health, safety and
security
1.1
Carry out work in accordance with workplace policies and
procedures
1.2
Follow safe work practices and ensure personal safety and
the safety of others in accordance with workplace
procedures
1.3
Identify and promptly report to supervisor hazards and
issues or breaches of health, safety and security in the
workplace
2 Apply procedures for
emergency situations
1.4
Report any suspicious behavior or unusual occurrences
promptly to the supervisor or designated personnel in
accordance with workplace procedures
1.5
Follow all workplace procedures for reporting symptoms and
injuries to self and/or others
2.1
Identify emergency situations and potential emergency
situations and take required action promptly within the
scope of individual responsibility and in accordance with
workplace emergency procedures
2.2
Locate and/or use safety equipment in accordance with
workplace guidelines
2.3
Assess the need for, and perform basic first aid
procedures within scope of authority and in accordance
with workplace procedures and recognised first aid
techniques
2.4
Seek assistance promptly from colleagues or other
authorities, where appropriate
2.5
Report to supervisor and record details of emergency
situations in accordance with workplace health and safety
policy
16. HS00326 Apply Workplace Health, Safety and Security Procedures
Unit Page 2 of 4
3 Prevent infection in the
workplace
RANGE STATEMENT
All range statements must be assessed:
1. Health, safety and security
procedures include:
3.1
Keep work environment clean and tidy in accordance with
Infection Prevention and Control guidelines
3.2
Maintain personal hygiene practices in accordance with
Infection Prevention and Control guidelines
3.3
Dispose of items which may be contaminated in accordance
with Infection Prevention and Control guidelines
5. Emergency situations include:
bomb threats
irate clients
emergency, fire and accident
incident and accident reporting
consultation
hazard identification
risk assessment
risk control
security, including:
- documents
- equipment
- people
- key control systems
2. Hazards include:
workplace workloads
manual handling
ventilation
toxic or hazardous substances
Repetitive Strain Injury
biohazard waste
intoxicated persons or drug
users
personal threat by clients,
visitors and other staff
aggressive behaviour of clients
gases
accidents
robberies or armed hold-ups
fires
natural disasters
power failure
6. Safe work practices include:
use of personal protective
equipment
safe posture and movements,
including sitting, standing and
bending
using safe manual handling
techniques for such things as
lifting and transferring
taking designated breaks
rotating tasks
using tools and equipment
properly and handling hot
surfaces
safe handling of chemicals
using ergonomic furniture and
workstations
clearing any hazards from
immediate work area
paying attention to safety
signage
17. HS00326 Apply Workplace Health, Safety and Security Procedures
Unit Page 3 of 4
3. Basic first aid includes:
minor cuts / scrapes / skin
abrasions
minor burns
choking
fume inhalation
chemical irritation
allergic reactions
4. Items which may be contaminated
include:
biohazard waste
clothing
7. Safety equipment includes:
fire extinguishers
fire alarms
first aid kit
emergency lighting/warning
systems
Personal Protective Equipment
fire hose
smoke detectors
UNDERPINNING KNOWLEDGE & SKILLS
Candidates must know and understand:
1. what are the workplace health, safety and security policies and procedures
2. why is it important to follow these procedures and what are the implications of not following them
3. what are the legal requirements for health, safety and security procedures
4. what are the Personal Protective Equipment (P.P.E.) required for relevant tasks to your work area
5. what are the workplace safety signs, procedures, emergency evacuation plans, and hazard
identification procedures
6. what are the major workplace hazards and associated health, safety and security risks associated
with the hazards
7. what are individual employee responsibilities in relation to ensuring safety of self, other workers
and other persons in the workplace
8. what are the principles of basic first aid as it applies to your own scope of authority and in
accordance with recognized first aid techniques
9. where to locate safety equipment such as fire extinguishers, emergency exits and alarms and how
to operate them
10. what are the workplace procedures that apply to fire, accidents and emergency situations
11. what are the reporting mechanisms required for workplace injury and compensation claims
12. what is the importance of maintaining a clean and organized work area and how it can contribute
to health, safety, security and infection prevention and control
13. how to check that all tools and equipment are fully operational and materials are within their expiry
date and take appropriate action if they are not fit for use
14. how to perform lifting, lowering and transfer techniques of safe manual handling
15. how to implement practices that prevent or minimise risk
16. how to dispose of any waste or hazardous materials in accordance with Infection Prevention and
Control guidelines
17. how to correctly use equipment according to manufacturers’ specifications
18. how to promptly report any incidents or risks to health, safety and security to relevant personnel
and complete the required health and safety records clearly and accurately in a timely manner
19. how to recognize and report workplace hazards including drug and alcohol use and mental health
issues
18. HS00326 Apply Workplace Health, Safety and Security Procedures
Unit Page 4 of 4
20. how to handle situations with difficult clients in accordance with workplace guidelines
EVIDENCE GUIDE
(1) Critical Aspects of Evidence
Evidence should include a demonstrated ability to:
a. apply workplace health, safety and security procedures and incorporate safe work practices
into all workplace activities
b. identify and treat with hazards and emergency situations
c. apply strategies to prevent infection in the workplace
(2) Method of Assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic.
Evidence can be gathered through a variety of ways including direct observation, supervisor’s
reports, project work, samples and questioning. Questioning techniques should not require
language, literacy and numeracy skills beyond those required in this unit of competency. The
candidate must have access to all tools, equipment, materials and documentation required. The
candidate must be permitted to refer to any relevant workplace procedures, product and
manufacturing specifications, codes, standards, manuals and reference materials.
(3) Context of Assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where
assessment occurs off the job, that is the candidate is not in productive work, then an appropriate
simulation must be used where the range of conditions reflects realistic workplace situations. The
competencies covered by this unit would be demonstrated by an individual working alone or as part
of a team. The assessment environment should not disadvantage the candidate.
19. HS00340 Use Basic Laboratory Tools and Equipment
Unit Page 1 of 3
HS00340 Use Basic Laboratory Tools and Equipment
Unit Descriptor: This unit deals with the skills and knowledge required to
operate a range of basic laboratory tools and equipment under
the guidance of the medical laboratory technician.
ELEMENTS PERFORMANCE CRITERIA
Candidates must be able to:
1
Prepare basic laboratory tools
and equipment for use
2 Use basic laboratory tools,
equipment and techniques
1.1
Wear appropriate Personal Protective Equipment in
accordance with workplace health and safety guidelines
1.2
Check that tools and equipment are functional in accordance
with manufacturers guidelines
1.3
Report any tools and equipment that are non-functional to
supervisor in accordance with workplace procedures
2.1 Operate tools and equipment to carry out particular tasks in
accordance with manufacturer’s instructions
2.2
Read and record measurements, if required, in accordance
with standard operating procedures
2.3 Report any damages to tools or equipment to supervisor in
accordance with workplace procedures
2.4 Dispose of biohazard waste in accordance with workplace
waste disposal procedures
3 Sanitize and maintain
equipment
3.1
Sanitize tools and equipment in accordance with standard
operating procedures
3.2 Store tools and equipment in appropriate area in accordance
with standard operating procedures
20. HS00340 Use Basic Laboratory Tools and Equipment
Unit Page 2 of 3
RANGE STATEMENT
All range statements must be assessed:
1. Tools and equipment include:
analytical scale
autoclaves
laminar flow cabinets
fume cupboard
centrifuge
incubator
water baths
refrigerator
freezer
volumetric glassware
pipettes
ovens
filtration apparatus
thermometers
transfer and inoculation tools
pH meters
thermostat
agitator
sterilizers
syringes
petri-dishes
flasks
measuring cylinders
bottles
test tubes
needles
adaptors
2. Personal Protective Equipment
includes:
gloves
laboratory coat
flat, closed-toe shoe
goggles / face shield
3. Measurements include:
weights
volume
time
temperature
4. Biohazard waste includes:
contaminated fomites
liquid waste
disposable tools
UNDERPINNING KNOWLEDGE & SKILLS
Candidates must know and understand:
1. what is the purpose, principles and use of a range of basic medical laboratory tools and
equipment
2. what are the features and operating techniques of basic medical laboratory equipment
3. what are the equipment components, purpose and operation
4. what are the emergency procedures for a range of operational problems
5. what is the significance and method of monitoring equipment operation
6. what are the Occupational safety and health (OSH) hazards and controls
7. what are the procedures and responsibility for reporting problems
8. what are the environmental issues and controls
9. what are the cleaning and sanitising requirements of tools, equipment and work area
10. what are the aseptic techniques where relevant
11. how to fit and use appropriate personal protective clothing and/or equipment
21. HS00340 Use Basic Laboratory Tools and Equipment
Unit Page 3 of 3
12. how to select tools and equipment appropriate for the task
13. how to confirm equipment status and condition. This may include:
recognising and rejecting contaminated or faulty glassware and equipment
safety checks
replacing consumables
functionality
14. how to follow operating procedures to deliver accurate amounts. This can involve:
weighing
centrifuging
separating
pipetting
measuring
15. how to take corrective action and/or report out-of-specification results, anomalies or non-
compliance
16. how to handle biohazard waste according to workplace procedures
17. how to shut down equipment in response to an emergency situation
18. how to shut down equipment in response to routine shutdown requirements
19. how to clean and sanitize tools and equipment according to workplace procedures
20. how to carry out daily maintenance of tools and equipment according to manufacturer’s
instructions
EVIDENCE GUIDE
(1) Critical Aspects of Evidence
Evidence should include a demonstrated ability to:
a. safely use basic medical laboratory tools and equipment according to workplace
procedures
b. prepare and store tools and equipment according to workplace guidelines and
manufacturer’s instructions
c. sanitize and maintain tools and equipment according to workplace guidelines and
manufacturer’s instructions
(2) Method of Assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic.
Evidence can be gathered through a variety of ways including direct observation, supervisor’s
reports, project work, samples and questioning. Questioning techniques should not require
language, literacy and numeracy skills beyond those required in this unit of competency. The
candidate must have access to all tools, equipment, materials and documentation required.
The candidate must be permitted to refer to any relevant workplace procedures, product and
manufacturing specifications, codes, standards, manuals and reference materials.
(3) Context of Assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job.
Where assessment occurs off the job, that is the candidate is not in productive work, then an
appropriate simulation must be used where the range of conditions reflects realistic workplace
situations. The competencies covered by this unit would be demonstrated by an individual
working alone or as part of a team. The assessment environment should not disadvantage
the candidate.
22. HS00341 Maintain Work Station and Equipment in a Medical Laboratory
Unit Page 1 of 3
HS0341 Maintain Work Station and Equipment in a Medical
Laboratory
Unit Descriptor: This unit deals with the skills and knowledge required to effectively
clean and maintain the work area which includes work stations and
equipment in a medical laboratory, in accordance with workplace
health and safety guidelines.
ELEMENTS PERFORMANCE CRITERIA
Candidates must be able to:
1
Clean and sanitize work area
1.1 Follow cleaning schedules and seek clarification from
supervisor on tasks, if necessary, according to workplace
procedures
1.2 Wear relevant Personal Protective Equipment for cleaning
work area and equipment in the medical laboratory in
accordance with workplace procedures
1.3
Use cleaning chemicals and equipment to clean and sanitise
medical laboratory work stations and equipment in
accordance with workplace procedures
1.4
Decontaminate and clean any spillage on floors that may
occur in accordance with Infection Prevention and Control
guidelines
1.5
Follow first aid procedures in the event of a chemical accident
according to Material Safety Data Sheets
2 Handle waste 2.1
Place biohazard waste into colour-coded bags for disposal
in accordance with workplace procedures, relevant codes
and regulations
2.2
Transport biohazard waste to designated disposal area in
accordance with workplace procedures
2.3
Replace relevant colour-coded bags in bins in accordance
with workplace procedures
3 Maintain a safe work
environment
3.1
Record daily temperatures of laboratory rooms and
equipment and submit to supervisor in accordance with
workplace procedures
3.2
Maintain organisation of laboratory equipment and stocks in
accordance with workplace procedures
3.3 Report potential hazards and/or maintenance issues in own
work area to designated personnel
3.4 Minimise the generation of waste and environmental impacts
in accordance with workplace guidelines
23. HS00341 Maintain Work Station and Equipment in a Medical Laboratory
Unit Page 2 of 3
RANGE STATEMENT
All range statements must be assessed:
1. Work area includes:
Hematology laboratory
blood bank
biochemistry laboratory
immunology laboratory
microbiology laboratory
histology laboratory
cytology laboratory
molecular biology laboratory
sample collection area
tissue transplant area
2. Recording temperatures include:
rooms
refrigerators
freezers
incubators
3. Colour-coded bag includes:
red
yellow
4. Work station and equipment includes:
incubators
fume hoods
counter tops
bench tops
sinks
refrigerator
interior and exterior of cupboards
glassware
water bath
centrifuge
hotplate
autoclave
5. Biohazard waste includes:
contaminated fomites
liquid waste
disposable tools
UNDERPINNING KNOWLEDGE & SKILLS
Candidates must know and understand:
1. what are the workplace procedures for the cleaning and sanitizing of work areas including
work stations, tools and equipment
2. what are the storage requirements for specific materials and equipment
3. what are the workplace procedures for minimisation and disposal of waste
4. what is the relevant information required from the Material Safety Data Sheets (MSDS)
for handling chemicals to carry out particular task
5. what are the relevant health, safety and environmental requirements of the workplace
6. how to safely sanitize work area and equipment using appropriate cleaning agents,
cleaning equipment and techniques
7. how to safely decontaminate, clean and remove spillages
8. how to safely dispose of waste
9. how to minimise the exposure to hazards of self, others and the laboratory
10. how to safely store tools, equipment and materials using workplace procedures, relevant
codes and guidelines
11. how to report potential hazards and maintenance issues according to workplace
procedures
24. HS00341 Maintain Work Station and Equipment in a Medical Laboratory
Unit Page 3 of 3
EVIDENCE GUIDE
(1) Critical Aspects of Evidence
Evidence should include a demonstrated ability to:
a. apply workplace policies and procedures when cleaning and maintaining the work area
b. work safely and minimise exposure of hazards to self, others and the laboratory
c. ensure the work area is maintained in accordance with workplace standards
(2) Method of Assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic.
Evidence can be gathered through a variety of ways including direct observation, supervisor’s
reports, project work, samples and questioning. Questioning techniques should not require
language, literacy and numeracy skills beyond those required in this unit of competency. The
candidate must have access to all tools, equipment, materials and documentation required.
The candidate must be permitted to refer to any relevant workplace procedures, product and
manufacturing specifications, codes, standards, manuals and reference materials.
(3) Context of Assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job.
Where assessment occurs off the job, that is the candidate is not in productive work, then an
appropriate simulation must be used where the range of conditions reflects realistic workplace
situations. The competencies covered by this unit would be demonstrated by an individual
working alone or as part of a team. The assessment environment should not disadvantage
the candidate.
25. HS00342 Use Computer Technology for Laboratory Applications
Unit Page 1 of 3
HS00342 Use Computer Technology for Laboratory
Applications
Unit Descriptor: This unit deals with the skills and knowledge required for information and
data storage, retrieval, analysis and reporting for medical laboratories.
ELEMENTS PERFORMANCE CRITERIA
Candidates must be able to:
1
Access equipment
1.1
Identify appropriate equipment required for information
management in accordance with workplace procedures
1.2
Access software from a personal computer or network
terminal in accordance with workplace procedures and
policies
2 Use application software 2.1
Enter laboratory information into the computing
system according to supervisor’s instructions and specified
workplace procedure
3 Compile data and document
reports
2.2
Conduct searches for information output in accordance with
workplace procedures
2.3
Use application features for calculations in accordance with
workplace procedures
2.4
Construct data sets and databases for numerical and
graphical analysis in accordance with workplace procedures
2.5
Obtain data from diverse applications and integrate in
accordance with workplace procedures
3.1
Compile data using software package applications in
accordance with workplace procedures
3.2
Select correct options for constructing statistical data in
accordance with workplace procedures
3.3 Document results of data analysis using appropriate
document format and design in accordance with workplace
guidelines
3.4 Print reports using software package functions in
accordance with manufacturer's instructions
4 Complete software applications 4.1
Back up data and/or archive in accordance with workplace
procedures
4.2
Submit hard copies to supervisor and file according to
workplace procedures
26. HS00342 Use Computer Technology for Laboratory Applications
Unit Page 2 of 3
RANGE STATEMENT
All range statements must be assessed:
1. Laboratory information includes:
patient/client demographics
scope of tests requested
sample non-compliance
2. Software packages include:
Laboratory Information Management
Systems (LIMS) which includes:
• word processing
• spreadsheets
• databases
• graphical and statistical analysis
3. Functions include:
formatting
integrating
charts and tables
4. Laboratory software applies to:
sample login, tracking and scheduling
tracking labels
worksheets
status and backlog reports
barcoding
patient/client reports
5. Information and reference sources
include:
statistics
automatic data transfer, including
barcode systems
internet, intranet and email
UNDERPINNING KNOWLEDGE & SKILLS
Candidates must know and understand:
1. how the software package can be applied to the laboratory information management
system
2. what are the functions and commands associated with the software package
3. what is the relationship between procedures for data input and file storage
4. how to file and record maintenance
5. what are the basic statistical concepts, where relevant
6. how to select the appropriate software package for the data processing operation
7. how to use routine commands and instructions of the software package to complete the
required operation
8. how to use the software package to compile statistical data
9. how to present accurate data in the required format. This may include charts and tables.
10. how to back up electronic files
11. how to follow procedures to troubleshoot basic software problems
12. how to maintain the confidentiality of data according to workplace procedures
13. how to generate data in a timely manner in the required format
27. Unit Page 3 of 3
HS00342 Use Computer Technology for Laboratory Applications
EVIDENCE GUIDE
(1) Critical Aspects of Evidence
Evidence should include a demonstrated ability to:
a. use computer equipment and hardware
b. use medical laboratory software applications
c. back up data according to workplace procedures
(2) Method of Assessment
Assessors should gather a range of evidence that is valid, sufficient, current and
authentic. Evidence can be gathered through a variety of ways including direct
observation, portfolio, supervisor’s reports, project work, samples and questioning.
Questioning techniques should not require language, literacy and numeracy skills beyond
those required in this unit of competency. The candidate must have access to all tools,
equipment, materials and documentation required. The candidate must be permitted to
refer to any relevant workplace procedures, product and manufacturing specifications,
codes, standards, manuals and reference materials.
(3) Context of Assessment
This unit may be assessed on the job, off the job or a combination of both on and off the
job. Where assessment occurs off the job, that is the candidate is not in productive work,
then an appropriate simulation must be used where the range of conditions reflects
realistic workplace situations. The competencies covered by this unit would be
demonstrated by an individual working alone or as part of a team. The assessment
environment should not disadvantage the candidate.
28. HS00343 Maintain Stock Levels in a Medical Laboratory
Unit Page 1 of 3
1.5
2 Receive stock 2.1
2.2
3 Store stock 3.1
3.2
3.3
4 Rotate and maintain stock 4.1
4.2
4.3
HS00343 Maintain Stock Levels in a Medical Laboratory
.
Unit Descriptor: This unit deals with the skills and knowledge required to assist
with maintaining adequate stock levels for a medical
laboratory, in accordance with workplace procedures and
practices.
ELEMENTS PERFORMANCE CRITERIA
Candidates must be able to:
1
Order stock
1.1
Count stocks and check if they are within the
maximum/minimum levels required for the laboratory in
accordance with workplace procedures
1.2
Check the packaging information on individual stock items,
and confirm that critical details are within acceptable limits in
accordance with workplace procedures
1.3
Record and report stock levels to supervisor in accordance
with workplace procedures
1.4
Prepare stock requisition form for specified re-order levels of
stock, and obtain supervisor’s approval in accordance with
workplace procedures
Submit approved stock requisition form to stores in
accordance with workplace procedures
Receive and check new stocks from stores against
requisition form in accordance with workplace procedures
Record any discrepancies in stock and report to supervisor
in accordance with workplace procedures
Safely transport stock to the storage area in accordance with
workplace procedures
Store stock in appropriate storage area and conditions in
accordance with workplace procedures
Record updated stock levels in accordance with workplace
procedures
Rotate stock in accordance with workplace safety
requirements
Check and record stock quality and condition in accordance
with workplace procedures
Maintain a clean and organized storage area in accordance
with workplace health and safety guidelines
29. HS00343 Maintain Stock Levels in a Medical Laboratory
Unit Page 2 of 3
RANGE STATEMENT
All range statements must be assessed:
1. Stocks include:
biological specimens and materials
scientific or technical consumables
chemicals
stationery
2. Transport stock includes:
manual handling
moving aids (e.g. trolley)
with assistance from others
3. Discrepancies include:
incorrect stock / brand / size
incorrect quantity
damages
quality
expiry dates
breakage / spillage
4. Inventory includes:
laboratory stores
hardware stores
stationery stores
general stores
medical stores
5. Critical details include:
safety data sheets
quantities
expiry dates
delivery dates
weights
hazard labels
condition received
UNDERPINNING KNOWLEDGE & SKILLS
Candidates must know and understand:
1. what are the health and safety requirements of your work area
2. what are the safe lifting and handling procedures required when transporting stock
3. what is the importance of correct identification of stock, and any unique workplace coding
system
4. why it is important to maintain accurate records of stock including resources, equipment
and consumables
5. what are the types and range of stocks of resources, equipment and consumables used
in the workplace, and how they have to be checked
6. how to check the packaging information on stock (such as batch numbers and expiry
dates)
7. how and why it is important to identify materials or chemicals that should not be stored
together
8. what are the range of storage environments used to store medical laboratory resources,
equipment and consumables for workplace use
9. how to label new stock items correctly, and how to record the information
10. where and how stock items should be stored in accordance with workplace guidelines
11. how to monitor and control stock levels for medical laboratory use
12. how to dispose of expired stock items, in accordance with workplace procedures
30. HS00343 Maintain Stock Levels in a Medical Laboratory
Unit Page 3 of 3
EVIDENCE GUIDE
(1) Critical Aspects of Evidence
Evidence should include a demonstrated ability to:
a. follow health and safety requirements in maintaining levels of stock for medical
laboratory purposes
b. identify stock and take count of stock levels
c. efficiently and safely receive and store stock
(2) Method of Assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic.
Evidence can be gathered through a variety of ways including direct observation, supervisor’s
reports, project work, samples and questioning. Questioning techniques should not require
language, literacy and numeracy skills beyond those required in this unit of competency. The
candidate must have access to all tools, equipment, materials and documentation required.
The candidate must be permitted to refer to any relevant workplace procedures, product and
manufacturing specifications, codes, standards, manuals and reference materials.
(3) Context of Assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job.
Where assessment occurs off the job, that is the candidate is not in productive work, then an
appropriate simulation must be used where the range of conditions reflects realistic workplace
situations. The competencies covered by this unit would be demonstrated by an individual
working alone or as part of a team. The assessment environment should not disadvantage
the candidate.
31. HS00344 Prepare Medical Specimen for Testing Activities
Unit Page 1 of 3
HS00344 Prepare Medical Specimen for Testing Activities
Unit Descriptor: This unit deals with the skills and knowledge to prepare medical
specimen for testing and storage, in accordance with workplace
procedures.
ELEMENTS PERFORMANCE CRITERIA
Candidates must be able to:
1 Receive specimen 1.1
Wear Personal Protection Equipment (P.P.E) to handle
medical specimen in accordance with workplace health and
safety practices
1.2
Receive and handle specimen at sample collection area in
accordance with universal precautions
2 Record specimen 2.1
Sort and verify identity of specimen with accompanying
requisition form in accordance with workplace procedures
2.2
Check integrity of specimen in accordance with workplace
acceptance and rejection criteria
2.3
Record all accepted specimen in accordance with workplace
acceptance and rejection criteria
2.4
Record rejected specimen and verify with supervisor and
dispatch report in accordance with rejection criteria
3 Transport and store specimen 3.1
Transport specimen to respective department using
appropriate transportation vehicle/equipment in accordance
with workplace guidelines
3.2
Carry out sub-logging of specimen for further testing in
accordance with workplace procedures
3.3 Centrifuge specimen and aliquot for testing using
appropriate equipment in accordance with workplace
standard operating procedures
3.4 Label aliquoted specimen in accordance with workplace
standard operating procedures
3.5
3.6
Store specimen not for immediate testing in accordance with
department standard operating procedure
Dispose of waste material in accordance with workplace
guidelines
32. HS00344 Prepare Medical Specimen for Testing Activities
Unit Page 2 of 3
RANGE STATEMENT
All range statements must be assessed:
1. Personal Protective Equipment
includes:
gloves
laboratory coat
flat, closed-toe shoe
goggles / face shield
2. Rejection criteria includes:
damage / spillage
unlabelled specimen
hemolysed specimen
icteric specimen
lipemic specimen
insufficient volume
insufficient data on request form
facilities unavailable
3. Transport vehicle/equipment includes:
trays / racks
trollies
coolers
4. Store specimen includes:
freezer
refrigerator
incubator
at room temperature in designated
storage area
5. Departments include:
hematology
blood bank
biochemistry
immunology
microbiology
histology
cytology
tissue transplant
molecular
sample collection area
6. Record and verify rejected specimen
includes:
rejection report
rejection log book
signature of supervisor
7. Equipment includes:
centrifuge
glassware
pasteur pipettes
test tubes
UNDERPINNING KNOWLEDGE & SKILLS
Candidates must know and understand:
1. what are the health and safety requirements of the area in which you are preparing
medical specimen for testing activities
2. what are the implications of not taking account of legislation, regulations, standards and
guidelines when preparing medical specimen for testing activities
3. why is it important to wear Personal Protective Equipment for preparing medical
specimen for testing activities
4. what is the importance of correct identification, and any unique workplace coding system
5. what are the lines of communication and responsibilities in your department, and their
links with the rest of the organisation
6. what are the limits of your own authority and to whom you should report if you have
problems that you cannot resolve
7. why are the right sample storage conditions important
8. how to check the identity of specimen
9. how to check integrity of specimen using the acceptance and rejection criteria of the
workplace
33. HS00344 Prepare Medical Specimen for Testing Activities
Unit Page 3 of 3
10. what are the skills required to sort specimen to ensure efficient turnaround time
11. what are the types of containers used for the transport of specimen
12. what are the types of equipment used to sort specimen
13. why it is important to carry out pre-use check and identify the status of equipment before
it is used to sort specimen
14. how to load and unload equipment used in specimen preparation
15. what is the procedure to be followed when specimen do not match up with the
accompanying documentation
16. what is the procedure to be followed when a broken or spilled specimen is identified in
the workplace
17. what are the methods used for numbering and labelling specimen in the workplace
18. what are the procedures for storing specimen when archiving is required
19. what are the factors which might adversely affect the integrity of the specimen during
storage or transport
EVIDENCE GUIDE
(1) Critical Aspects of Evidence
Evidence should include a demonstrated ability to:
a. follow workplace safety precautions when preparing medical
specimen for testing activities
b. sort, record and transport specimen in accordance with workplace
procedures
c. handle specimen safely in accordance with workplace health and
safety procedures
d. centrifuge and aliquot specimen in accordance with workplace
standard operating procedures
(2) Method of Assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic.
Evidence can be gathered through a variety of ways including direct observation, supervisor’s
reports, project work, samples and questioning. Questioning techniques should not require
language, literacy and numeracy skills beyond those required in this unit of competency. The
candidate must have access to all tools, equipment, materials and documentation required.
The candidate must be permitted to refer to any relevant workplace procedures, product and
manufacturing specifications, codes, standards, manuals and reference materials.
(3) Context of Assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job.
Where assessment occurs off the job, that is the candidate is not in productive work, then an
appropriate simulation must be used where the range of conditions reflects realistic workplace
situations. The competencies covered by this unit would be demonstrated by an individual
working alone or as part of a team. The assessment environment should not disadvantage
the candidate.
34. HS00345 Prepare Laboratory Solutions, Stains and Media
Unit Page 1 of 4
HS00345 Prepare Laboratory Solutions, Stains and Media
Unit Descriptor: This unit deals with the skills and knowledge required to prepare
agar media and a variety of solutions and stains for use in the
medical laboratory.
ELEMENTS PERFORMANCE CRITERIA
Candidates must be able to:
1
Prepare materials, tools and
equipment
2 Prepare solutions, stains and
agar media
3 Store prepared solutions, stains
and agar media
1.1
Identify and select materials to prepare solutions, stains and
agar media in accordance with workplace and
manufacturer’s instructions
1.2
Prepare materials to meet departmental and task
requirements
1.3 Confirm services are available and ready for use in
accordance with task requirements
1.4 Select, prepare and confirm status for use of tools and
equipment
1.5 Report any faulty or damaged tools and equipment in
accordance with workplace guidelines
2.1 Monitor equipment to confirm operating condition when
preparing solutions, stains and agar media
2.2
Prepare solutions, stains and agar media and record in
accordance with manufacturer and departmental
specification
2.3
Re-do unacceptable solutions, stains and agar media in
accordance with supervisor's instructions
2.4
Monitor and dispose of generated waste from process using
various disposal methods in accordance with workplace
procedures
2.5
Clean and sanitize work area, tools and equipment in
accordance with workplace procedures
3.1
Label prepared solutions, stains and agar media in
accordance with workplace procedures
3.2
Store prepared solutions, stains and agar media in
appropriate environmental conditions in accordance with
workplace procedures
3.3
Record workplace information on prepared solutions, stains
and agar media in accordance with workplace procedures
35. HS00345 Prepare Laboratory Solutions, Stains and Media
Unit Page 2 of 4
RANGE STATEMENT
All range statements must be assessed:
1. Materials include:
reagents
purified water
alcohol
acid
acetone
formaldehyde
xylene
petri dishes
agar powder
2. Tools and equipment include:
scale
electronic balance
laboratory glassware
autoclave
fume cupboard
hotplate
pH meter
water baths
weigh boats
refrigerator
thermometer/thermostat
timers
3. Solutions and stains include:
those required for standard analytical
and microbiological procedures and
other tests determined by the scope and
classification of the laboratory
4. Services include:
electricity
water
gas
5. Label prepared solutions, stains and
agar media includes:
name
date prepared
use by / expiry date
codes
hazardous sign
6. Record workplace information includes:
quantity of stains, solutions and agar
media used
date prepared
solutions, stains and agar media
prepared
prepared by
stock shortages / low stock
36. HS00345 Prepare Laboratory Solutions, Stains and Media
Unit Page 3 of 4
UNDERPINNING KNOWLEDGE & SKILLS
Candidates must know and understand:
1. what is the purpose of basic laboratory solutions, stains and materials
2. what is the effect of inappropriate storage on solutions, stains and agar media
3. what are the emergency and troubleshooting procedures for operational problems
4. what is the effect of process stages on results and outcomes
5. what are the process specifications, procedures and operating parameters of equipment
6. what are the Occupational Safety and Health (OSH) hazards and controls
7. what are the procedures and responsibility for reporting problems
8. what are the cleaning and sanitizing requirements of tools and equipment and the work
area
9. what are the recording requirements and procedures
10. what are the aseptic techniques where relevant
11. why it is important to follow manufacturer’s and departmental instructions in preparing
materials
12. how to select, fit and use appropriate personal protective clothing and/or equipment
13. how to confirm equipment status and condition. This may include:
recognising and rejecting contaminated or faulty glassware and equipment
safety checks
replacing consumables
instrument setting and calibration
14. how to operate basic laboratory equipment according to workplace procedures
15. how to deliver accurate weights and measurements of materials
16. how to handle and combine materials
17. how to prevent cross-contamination
18. how to ensure solution and stain specifications. This may include:
concentration
contents
homogenous mix
19. how to report anomalies in the preparation of solutions, stains and agar media
20. how to store materials and prepared solutions, stains and agar media according to
workplace procedures
21. how to shut down equipment in response to routine and emergency requirements
22. how to clean and sanitize equipment according to enterprise procedures
EVIDENCE GUIDE
(1) Critical Aspects of Evidence
Evidence should include a demonstrated ability to:
a. work safely in accordance with workplace procedures
b. prepare solutions, stains and agar media according to manufacturers and departmental
requirements
c. conduct housekeeping and dispose of waste according to workplace standards
d. record information on the preparation of solutions, stains and agar media
(2) Method of Assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic.
Evidence can be gathered through a variety of ways including direct observation, supervisor’s
reports, project work, samples and questioning. Questioning techniques should not require
language, literacy and numeracy skills beyond those required in this unit of competency. The
candidate must have access to all tools, equipment, materials and documentation required.
37. HS00345 Prepare Laboratory Solutions, Stains and Media
Unit Page 4 of 4
The candidate must be permitted to refer to any relevant workplace procedures, product and
manufacturing specifications, codes, standards, manuals and reference materials.
(3) Context of Assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job.
Where assessment occurs off the job, that is the candidate is not in productive work, then an
appropriate simulation must be used where the range of conditions reflects realistic workplace
situations. The competencies covered by this unit would be demonstrated by an individual
working alone or as part of a team. The assessment environment should not disadvantage
the candidate.
38. GLOSSARY OF TERMS
Occupational Standards
Occupational Standards of competence are industry-determined specifications of performance, which
describe the knowledge, skills and attitudes required by a worker in the performance of a particular role
in the workplace. They specify what a person should know and do in order to carry out the functions of a
particular job in the work environment. They are the building blocks for all activities in a competency-
based training and certification system. An Occupational Standard is made up of a qualification plan, a
unit title, elements, performance criteria, range statements, underpinning knowledge and skills and
evidence guide.
Qualification Plan – The Qualification Plan identifies the Mandatory units which are those units that are
necessary to deem a candidate competent in the occupational area and provide flexibility in different wok
environments. It also contains the Title and Level of the qualification to be awarded.
Unit Title - The unit title is a succinct statement of the outcome of the unit of competency. It reflects the
major activities or functions of an individual’s work as well as the discreet units of work.
Unit Descriptor - The unit descriptor communicates the content of the unit of competency and the skill
area it addresses.
Elements - These are the basic building blocks of the unit of competency. They describe the tasks in which
competence should be demonstrated in order to carry out the specific function.
Performance Criteria - These are the descriptions of the outcomes of performance required for successful
achievement of an element. They specify the required performance in relevant tasks, roles, skills and
applied knowledge that enables competent performance.
Range Statement - This describes the essential operating conditions that should be present in training and
assessment, depending on the work situation, needs of the candidate, accessibility of the item and local
industry contexts. It lists the parameters in which candidates much demonstrate their competence.
Underpinning Knowledge and Skills – The knowledge identifies what a person needs to know to perform
the work in an informed and effective manner. The skills describe the application of knowledge to
situations where understanding is converted into a workplace outcome.
Evidence Guide - The Evidence Guide is critical in assessment as it provides information to Training
Providers and Assessors about how the described competency should be demonstrated. It provides a range
of evidence for the Assessor to make a determination of competence and defines the assessment context.
The Evidence Guide describes:
Conditions under which competency must be assessed including variables such as the assessment
environment or necessary equipment
Suitable methodologies for conducting assessment including the potential for workplace
simulation
39. Resource implications, for example access to particular equipment, infrastructure or situations
How consistency in performance must be assessed over time, various contexts and with a range of
evidence
Level 1 – Directly supervised worker
Recognizes competence in a range of varied work activities performed in a variety of contexts. Most work
activities are simple and routine. Collaboration with others through work groups or teams may often be a
requirement. Substantial supervision is required especially during the early months evolving into more
autonomy with time.
Level 2 – Supervised skilled worker
Recognizes competence in a broad range of diverse work activities performed in a variety of contexts.
Some of these may be complex and non-routine and involve some responsibility and autonomy.
Collaboration with others through work groups or teams and guidance of others may be required.
Level 3 – Independent/autonomous skilled worker
Recognizes competence in a broad range of complex, technical or professional work activities performed
in a wide variety of contexts, with a substantial degree of personal responsibility and autonomy.
Responsibility for the work of others and the allocation of resources are often a requirement. The
individual is capable of self-directed application, exhibits problem solving, planning, designing and
supervisory capabilities.
Level 4 – Supervisory specialist worker
Recognizes competence involving the application of a range of fundamental principles and complex
techniques across a wide and unpredictable variety of contexts. Requires very substantial personal
autonomy and often significant responsibility for the work of others, the allocation of resources, as well
as personal accountability for analysis, diagnosis, design, planning, execution and evaluation.
Level 5 – Managerial professional worker
Recognizes the ability to exercise personal professional responsibility for the design, development or
improvement of a product, process, system or service. Recognizes technical and management
competencies at the highest level and includes those who have occupied positions of the highest
responsibility and made outstanding contribution to the promotion and practice of their occupation.