Business Aviation Economic Value and Business BenefitsArthur Thomas
Economic Value anhd Business Benefits provided by Business Aviation in Europe - Annual Report
Yearly Infographics Publication - A snapshot on the BizAv Market in 31 european Countries
The document discusses health and safety in the petroleum and construction industries. It provides an overview of common hazards in each industry such as chemical, physical, biological, and ergonomic hazards. In the petroleum industry, nearly half of fatalities are from vehicle crashes or being struck by objects. The construction industry also faces a wide variety of hazards like noise, falls, hazardous materials, and musculoskeletal disorders. Both industries require effective occupational safety and health management systems to control risks, monitor worker health, and improve safety performance.
The document discusses factors that influence employee job satisfaction. It identifies six key factors: personnel beliefs, salary and benefits, participation in decision making, job security, interaction with colleagues, and meeting basic needs. A study was conducted of employees in an insurance department to determine the relationship between these factors and job satisfaction. The findings revealed that all factors were positively correlated with job satisfaction. Personnel beliefs had the strongest influence on satisfaction, followed by interaction with colleagues.
This document summarizes laws and policies related to teachers in the Philippines across four categories: Commonwealth Acts, Republic Acts, Presidential Decrees, and Executive Orders. Some key points covered include:
- Commonwealth Act No. 177 protects teachers' tenure and places them under civil service rules. Commonwealth Act No. 578 recognizes teachers as persons in authority.
- Republic Act No. 4670, the Magna Carta for Public School Teachers, aims to improve teachers' living and working conditions to attract and retain qualified teachers.
- Presidential decrees establish rules for teacher examinations, eligibility, professionalization, and pensions.
- Executive orders cover policies like a new teacher career progression system, teacher salaries and benefits
The document discusses the role of human resources in an organization. It describes how human resource management involves attracting, developing, and retaining quality employees. It also outlines the importance of human resources in areas like recruitment, training, employee welfare, workplace safety, and awareness of legislation. The document further discusses the functions of human resource management like planning, organizing, staffing, directing, and controlling. It also provides an overview of the People Management Association of the Philippines and the history of personnel management in the country.
Government Laws and Regulations of Compensation, Incentives and BenefitsJoey Miñano
This document discusses laws and regulations related to compensation, incentives, and benefits for government employees in the Philippines. It provides details on several key laws:
- The Compensation and Position Classification Act of 1989 (RA 6758) which established a unified compensation and position classification system for government employees.
- The Salary Standardization Law III of 2009 which provided substantial salary increases for government employees, ranging from 28-142% depending on the position level.
- Required benefits that all working Filipinos receive, including contributions to Social Security (SSS), health insurance (PhilHealth), housing (Pag-ibig), and retirement (GSIS).
- Provisions around retirement benefits and privileges in the Labor
This document discusses school personnel management and classification. It describes the different types of personnel including administrative, teaching, and non-teaching staff. Administrative personnel include principals and head teachers, with duties like assigning teacher loads and building community relationships. Teaching personnel are those engaged in actual teaching, such as teachers and special education teachers. Non-teaching personnel include guidance counselors, librarians, bus drivers, cooks, and others who support school operations and students.
Business Aviation Economic Value and Business BenefitsArthur Thomas
Economic Value anhd Business Benefits provided by Business Aviation in Europe - Annual Report
Yearly Infographics Publication - A snapshot on the BizAv Market in 31 european Countries
The document discusses health and safety in the petroleum and construction industries. It provides an overview of common hazards in each industry such as chemical, physical, biological, and ergonomic hazards. In the petroleum industry, nearly half of fatalities are from vehicle crashes or being struck by objects. The construction industry also faces a wide variety of hazards like noise, falls, hazardous materials, and musculoskeletal disorders. Both industries require effective occupational safety and health management systems to control risks, monitor worker health, and improve safety performance.
The document discusses factors that influence employee job satisfaction. It identifies six key factors: personnel beliefs, salary and benefits, participation in decision making, job security, interaction with colleagues, and meeting basic needs. A study was conducted of employees in an insurance department to determine the relationship between these factors and job satisfaction. The findings revealed that all factors were positively correlated with job satisfaction. Personnel beliefs had the strongest influence on satisfaction, followed by interaction with colleagues.
This document summarizes laws and policies related to teachers in the Philippines across four categories: Commonwealth Acts, Republic Acts, Presidential Decrees, and Executive Orders. Some key points covered include:
- Commonwealth Act No. 177 protects teachers' tenure and places them under civil service rules. Commonwealth Act No. 578 recognizes teachers as persons in authority.
- Republic Act No. 4670, the Magna Carta for Public School Teachers, aims to improve teachers' living and working conditions to attract and retain qualified teachers.
- Presidential decrees establish rules for teacher examinations, eligibility, professionalization, and pensions.
- Executive orders cover policies like a new teacher career progression system, teacher salaries and benefits
The document discusses the role of human resources in an organization. It describes how human resource management involves attracting, developing, and retaining quality employees. It also outlines the importance of human resources in areas like recruitment, training, employee welfare, workplace safety, and awareness of legislation. The document further discusses the functions of human resource management like planning, organizing, staffing, directing, and controlling. It also provides an overview of the People Management Association of the Philippines and the history of personnel management in the country.
Government Laws and Regulations of Compensation, Incentives and BenefitsJoey Miñano
This document discusses laws and regulations related to compensation, incentives, and benefits for government employees in the Philippines. It provides details on several key laws:
- The Compensation and Position Classification Act of 1989 (RA 6758) which established a unified compensation and position classification system for government employees.
- The Salary Standardization Law III of 2009 which provided substantial salary increases for government employees, ranging from 28-142% depending on the position level.
- Required benefits that all working Filipinos receive, including contributions to Social Security (SSS), health insurance (PhilHealth), housing (Pag-ibig), and retirement (GSIS).
- Provisions around retirement benefits and privileges in the Labor
This document discusses school personnel management and classification. It describes the different types of personnel including administrative, teaching, and non-teaching staff. Administrative personnel include principals and head teachers, with duties like assigning teacher loads and building community relationships. Teaching personnel are those engaged in actual teaching, such as teachers and special education teachers. Non-teaching personnel include guidance counselors, librarians, bus drivers, cooks, and others who support school operations and students.
Wind Drivetrain: Reliability and Serviceability of DrivetrainsTorben Haagh
An integral component of a wind turbine, the drivetrain is continually evolving as new concepts and designs are explored. As larger turbines are developed, and more wind farms are installed in deeper water, the service and maintenance of each component must also be considered.
Want to learn more about this topic? Please also visit our website: http://bit.ly/wind-drivetrain
Offshore cabling the hidden arteries of the wind industryTorben Haagh
Underwater cables are crucial to offshore wind farms as they transport power from the wind turbines back to land, accounting for 10% of project costs. Faults in cables cause 70% of insurance claims, and repairing cables can be difficult work affected by weather. Experts say successful cable installation relies on thorough planning, engineering, and coordination between installers and developers from an early stage. A future European supergrid may help countries share renewable energy resources through interconnected offshore cabling networks.
Rotor blades: The economic challenges of rotor blade developmentTorben Haagh
The European Commission has committed to obtaining 20% of Europe's energy from renewable sources by 2020, with wind energy expected to be the largest contributor. Developing larger wind turbines with blades up to 20MW in size will be necessary to meet targets but poses technological and cost challenges. Manufacturers must increase blade size without dramatically raising production costs to make wind power competitive without subsidies. Transportation and noise from larger blades also present issues to overcome.
This document provides an overview of machinery safety standards and regulations. It discusses the key concepts in three areas:
1) Legal framework - It outlines the Machinery Directive and Work Equipment Directive which establish health and safety requirements for machinery in Europe. It also discusses the role of harmonized standards in establishing conformity.
2) Standards structure - European machinery safety standards are divided into three types: A) general standards, B) standards on specific safety aspects or safeguards, and C) machine-specific standards.
3) Manufacturer/user responsibilities - Manufacturers placing machinery on the EU market must comply with the Machinery Directive, while users must ensure purchased machines are CE marked and safe to use according to instructions.
Enercon, Nordex, Siemens Wind Power and Gamesa on overcoming the challenges o...Torben Haagh
Want to learn more about overcoming the challenges of anti-, de-icing and ice detection for wind turbines?
Then don't miss this unique opportunity to hear expert presentations, take part in interactive workshops and meet with wind turbine experts from around the world including participation from:
• Enercon GmbH • Nordex Energy GmbH • Siemens Wind Power A/S • Gamesa • Kjeller Vindteknikk • K2 Management A/S • Wicetec Oy • Wölfel Wind Systems and many many more.
Want to know more regarding this topic area? Then join us at our
Anti-Icing for Wind Turbines
06 – 07 May 2015 | Grand Elysée Hotel, Hamburg, Germany
To see the whole agenda, please click here http://bit.ly/Event-Agenda
If you would like to be part of our conference, please register: http://bit.ly/Event_Register
airsight supports wind farm developers to resolve complex wind farm planning issues related to aviation. As expert in
aerodrome operations and air traffic control, airsight provide its expertise to make complex wind turbine projects pos-
sible and to optimise assets allocation.
This document provides guidance on working safely with high energy electrical systems. It outlines several key safety requirements including isolating energy sources where possible, performing risk assessments, developing safe work plans, ensuring only trained workers perform tasks, using proper equipment, and having emergency procedures in place. High energy electrical sources present serious hazards like electric shock, burns, and arc flash that require protective measures.
Joe Da Costa provides a profile of his work experience for LinkedIn. He has extensive technical expertise in areas critical to the safety, cost and performance of power networks. This includes transformer design, fault level analysis, protection system design and incident investigations. As an example, he took full responsibility for ensuring adequate power supply and protection for the 2012 Olympics venues in London. He has also audited protection systems at major UK airports. Da Costa brings considerable value through complex analysis, technical advice and lectures that help optimize network operation and minimize risks.
Understanding terminology and mathematical bases of dependability
Being familiar with probabilities and their use in dependability
Beginning with reliability block diagrams
Grid Integration: Future for Electricity TransmissionTorben Haagh
The European Commission has targets for 20% of energy to come from renewable sources like wind power by 2020. This will require upgrades to Europe's electricity grid infrastructure to integrate more offshore wind power. The document discusses plans to build over 35,000 km of new transmission lines and upgrade 7,000 km of existing lines at a cost of 23-28 billion euros over 5 years. This will help connect renewable generation to areas of demand, improve security of supply, and facilitate a single European electricity market. However, integrating variable wind power over long distances poses technical challenges around transmission efficiency and managing periods of low generation.
Unlike other industries, detailed discussions about functional safety in the automotive industry only began a few years ago. One of the reasons was that there was a prevailing view that the risks posed as a result of mechanical failures are still within the control of the driver.
You can also find interesting articles here: http://bit.ly/steering-articles
Australian elevator association hand bookLutfi Ismail
This document summarizes the key points from the Australian Elevator Association Owners Handbook:
- It provides guidance on risk management plans, responsibilities of different parties, and safety practices for operating, maintaining, and working on elevators, escalators and moving walks.
- A risk management plan is required for each installed vertical transport system and must include a current hazard analysis, safety management over the life of the system, and budgeting for future maintenance and upgrades.
- Those in control of the systems, such as owners and service providers, have responsibilities to ensure safety for users and workers, including maintaining registration, inspection and servicing of the equipment.
- Safety procedures are outlined for installation, alteration
Guest speaker presentation at 'Seminar Offshore Wind Energy' UGent – June 201...Pieter Jan Jordaens
Introduction seminar to the new study program in 'Offshore Wind Energy' organized by the Faculty of Engineering Technology of the KU Leuven and the Faculty of Engineering and Architecture of the University of Ghent (UGent). Goals of the seminar was to give an overview of the current developments in the Belgian Offshore Wind industry. This seminar gave an overview in fields such as offshore wind energy technology, grid integration & operation and maintenance. My contribution gave an overview of the current drivers, technological evolutions, ongoing market trends and technical challenges within this relative new industry. Also insights in reliability issues, risk mitigation pathways and case studies from testing and monitoring projects within OWI-Lab have been presented.
IRJET- Smart Production Line Industry 4.0 - Leak Testing for Fuel TankIRJET Journal
This document discusses a smart production line system that uses leak testing to check for leaks in fuel tanks. It uses an Ateq leak detector to pressurize the fuel tank and measure any leakage through differential pressure. Data from each tank test is logged and a report is generated at the end of the cycle to ensure the leak test passed. The system allows integrating lean production practices with Industry 4.0 technologies like data logging and smart network connectivity between machines to create an intelligent production line.
The document discusses vehicle interactions in mining and other industries that often result in fatalities and injuries due to limited operator visibility and "blind spots". It recommends implementing ISO 5006/16001 standards to address this issue by using camera systems and proximity detection technologies. These "defenses" can help mitigate over 90% of incidents by improving visibility and warning operators of nearby objects or people. Companies are advised to conduct risk analyses, consider additional procedural controls, ensure technologies are reliable and fit for purpose, and properly manage safety systems ongoing through training, data collection, and process improvement.
Why do I Need Lockout/Tagout? discusses the importance of implementing an effective Lockout/Tagout (LOTO) program to prevent accidental startup of machinery or release of stored energy during maintenance or servicing. LOTO is necessary to protect employees from catastrophic injuries and fatalities. An effective LOTO program includes developing energy control procedures, employee training, and inspections to ensure hazardous energy sources are isolated before any work is performed. The document outlines the five key elements of an effective LOTO program: a written program, equipment-specific procedures, training, protective lockout devices, and regular inspections and reviews.
Introduction to Functional Safety and SIL CertificationISA Boston Section
This overview session will acquaint attendees with the key concepts in the IEC 61508 standard for functional safety of electrical/electronic and programmable electronic systems. An introduction is provided to safety integrity levels (SIL), the safety lifecycle and the requirements needed to achieve a functional safety certificate. Information will be provided on documentation requirements and an introduction to the basic objectives of product design for functional safety.
Wind Generators: the advantages and disadvantagesTorben Haagh
Learn more about the advantages and disadvantages of wind generators by reading this article.
Are you looking for more interesting content on windpower? Take a look here: http://bit.ly/ee-systems-wind-articles
Guideline for the certification of wind turbine service technicians 2015 julyMichael Mattocks
The document discusses guidelines for certifying wind turbine service technicians, including safety rules and cyber security concerns. It outlines the roles of organizations like RenewableUK, the Health & Safety Executive, and certification bodies in developing and enforcing standards for wind turbine safety. Technicians must be aware of statutory regulations and the importance of cyber security for wind farm control systems, as unauthorized access could disrupt controls and endanger safety.
Guideline for the Chartered Certification WTSR of Wind Turbine Service Techni...Michael Mattocks
The document discusses guidelines for certifying wind turbine service technicians, including safety rules and cybersecurity concerns. It outlines the roles of organizations like RenewableUK, the Health & Safety Executive, and WindHSE.org in developing wind turbine safety standards. The Wind Turbine Safety Rules version 3 include guidelines around high voltage boundaries and transformers. The document also warns that industrial control systems like those used in wind turbines are vulnerable to cyber attacks, referencing malware like Stuxnet that have targeted these systems in the past. Technicians must be aware of cybersecurity protocols to safely operate and maintain wind farm equipment.
Join us at the Wind Turbine Towers Conference to stay competitive by learning advanced #tower concepts and by getting a global perspective of the wind energy sector! Taking place between 27 – 29 August 2019, at Swissôtel in Bremen, Germany. Bitly: http://bit.ly/SS_Wind_Turbine_Towers_Agenda
Be there at the ISO26262 Conference on the 25-28 March 2019 at the Holiday Inn, Munich City Center, Germany. Confirmed speakers from Delphi Technologies, Toyota Research Institute, Texas Instruments. Read the details here: http://bit.ly/2Esno5h
More Related Content
Similar to Health and safety training standards and requirements for personnel in the offshore wind power industry
Wind Drivetrain: Reliability and Serviceability of DrivetrainsTorben Haagh
An integral component of a wind turbine, the drivetrain is continually evolving as new concepts and designs are explored. As larger turbines are developed, and more wind farms are installed in deeper water, the service and maintenance of each component must also be considered.
Want to learn more about this topic? Please also visit our website: http://bit.ly/wind-drivetrain
Offshore cabling the hidden arteries of the wind industryTorben Haagh
Underwater cables are crucial to offshore wind farms as they transport power from the wind turbines back to land, accounting for 10% of project costs. Faults in cables cause 70% of insurance claims, and repairing cables can be difficult work affected by weather. Experts say successful cable installation relies on thorough planning, engineering, and coordination between installers and developers from an early stage. A future European supergrid may help countries share renewable energy resources through interconnected offshore cabling networks.
Rotor blades: The economic challenges of rotor blade developmentTorben Haagh
The European Commission has committed to obtaining 20% of Europe's energy from renewable sources by 2020, with wind energy expected to be the largest contributor. Developing larger wind turbines with blades up to 20MW in size will be necessary to meet targets but poses technological and cost challenges. Manufacturers must increase blade size without dramatically raising production costs to make wind power competitive without subsidies. Transportation and noise from larger blades also present issues to overcome.
This document provides an overview of machinery safety standards and regulations. It discusses the key concepts in three areas:
1) Legal framework - It outlines the Machinery Directive and Work Equipment Directive which establish health and safety requirements for machinery in Europe. It also discusses the role of harmonized standards in establishing conformity.
2) Standards structure - European machinery safety standards are divided into three types: A) general standards, B) standards on specific safety aspects or safeguards, and C) machine-specific standards.
3) Manufacturer/user responsibilities - Manufacturers placing machinery on the EU market must comply with the Machinery Directive, while users must ensure purchased machines are CE marked and safe to use according to instructions.
Enercon, Nordex, Siemens Wind Power and Gamesa on overcoming the challenges o...Torben Haagh
Want to learn more about overcoming the challenges of anti-, de-icing and ice detection for wind turbines?
Then don't miss this unique opportunity to hear expert presentations, take part in interactive workshops and meet with wind turbine experts from around the world including participation from:
• Enercon GmbH • Nordex Energy GmbH • Siemens Wind Power A/S • Gamesa • Kjeller Vindteknikk • K2 Management A/S • Wicetec Oy • Wölfel Wind Systems and many many more.
Want to know more regarding this topic area? Then join us at our
Anti-Icing for Wind Turbines
06 – 07 May 2015 | Grand Elysée Hotel, Hamburg, Germany
To see the whole agenda, please click here http://bit.ly/Event-Agenda
If you would like to be part of our conference, please register: http://bit.ly/Event_Register
airsight supports wind farm developers to resolve complex wind farm planning issues related to aviation. As expert in
aerodrome operations and air traffic control, airsight provide its expertise to make complex wind turbine projects pos-
sible and to optimise assets allocation.
This document provides guidance on working safely with high energy electrical systems. It outlines several key safety requirements including isolating energy sources where possible, performing risk assessments, developing safe work plans, ensuring only trained workers perform tasks, using proper equipment, and having emergency procedures in place. High energy electrical sources present serious hazards like electric shock, burns, and arc flash that require protective measures.
Joe Da Costa provides a profile of his work experience for LinkedIn. He has extensive technical expertise in areas critical to the safety, cost and performance of power networks. This includes transformer design, fault level analysis, protection system design and incident investigations. As an example, he took full responsibility for ensuring adequate power supply and protection for the 2012 Olympics venues in London. He has also audited protection systems at major UK airports. Da Costa brings considerable value through complex analysis, technical advice and lectures that help optimize network operation and minimize risks.
Understanding terminology and mathematical bases of dependability
Being familiar with probabilities and their use in dependability
Beginning with reliability block diagrams
Grid Integration: Future for Electricity TransmissionTorben Haagh
The European Commission has targets for 20% of energy to come from renewable sources like wind power by 2020. This will require upgrades to Europe's electricity grid infrastructure to integrate more offshore wind power. The document discusses plans to build over 35,000 km of new transmission lines and upgrade 7,000 km of existing lines at a cost of 23-28 billion euros over 5 years. This will help connect renewable generation to areas of demand, improve security of supply, and facilitate a single European electricity market. However, integrating variable wind power over long distances poses technical challenges around transmission efficiency and managing periods of low generation.
Unlike other industries, detailed discussions about functional safety in the automotive industry only began a few years ago. One of the reasons was that there was a prevailing view that the risks posed as a result of mechanical failures are still within the control of the driver.
You can also find interesting articles here: http://bit.ly/steering-articles
Australian elevator association hand bookLutfi Ismail
This document summarizes the key points from the Australian Elevator Association Owners Handbook:
- It provides guidance on risk management plans, responsibilities of different parties, and safety practices for operating, maintaining, and working on elevators, escalators and moving walks.
- A risk management plan is required for each installed vertical transport system and must include a current hazard analysis, safety management over the life of the system, and budgeting for future maintenance and upgrades.
- Those in control of the systems, such as owners and service providers, have responsibilities to ensure safety for users and workers, including maintaining registration, inspection and servicing of the equipment.
- Safety procedures are outlined for installation, alteration
Guest speaker presentation at 'Seminar Offshore Wind Energy' UGent – June 201...Pieter Jan Jordaens
Introduction seminar to the new study program in 'Offshore Wind Energy' organized by the Faculty of Engineering Technology of the KU Leuven and the Faculty of Engineering and Architecture of the University of Ghent (UGent). Goals of the seminar was to give an overview of the current developments in the Belgian Offshore Wind industry. This seminar gave an overview in fields such as offshore wind energy technology, grid integration & operation and maintenance. My contribution gave an overview of the current drivers, technological evolutions, ongoing market trends and technical challenges within this relative new industry. Also insights in reliability issues, risk mitigation pathways and case studies from testing and monitoring projects within OWI-Lab have been presented.
IRJET- Smart Production Line Industry 4.0 - Leak Testing for Fuel TankIRJET Journal
This document discusses a smart production line system that uses leak testing to check for leaks in fuel tanks. It uses an Ateq leak detector to pressurize the fuel tank and measure any leakage through differential pressure. Data from each tank test is logged and a report is generated at the end of the cycle to ensure the leak test passed. The system allows integrating lean production practices with Industry 4.0 technologies like data logging and smart network connectivity between machines to create an intelligent production line.
The document discusses vehicle interactions in mining and other industries that often result in fatalities and injuries due to limited operator visibility and "blind spots". It recommends implementing ISO 5006/16001 standards to address this issue by using camera systems and proximity detection technologies. These "defenses" can help mitigate over 90% of incidents by improving visibility and warning operators of nearby objects or people. Companies are advised to conduct risk analyses, consider additional procedural controls, ensure technologies are reliable and fit for purpose, and properly manage safety systems ongoing through training, data collection, and process improvement.
Why do I Need Lockout/Tagout? discusses the importance of implementing an effective Lockout/Tagout (LOTO) program to prevent accidental startup of machinery or release of stored energy during maintenance or servicing. LOTO is necessary to protect employees from catastrophic injuries and fatalities. An effective LOTO program includes developing energy control procedures, employee training, and inspections to ensure hazardous energy sources are isolated before any work is performed. The document outlines the five key elements of an effective LOTO program: a written program, equipment-specific procedures, training, protective lockout devices, and regular inspections and reviews.
Introduction to Functional Safety and SIL CertificationISA Boston Section
This overview session will acquaint attendees with the key concepts in the IEC 61508 standard for functional safety of electrical/electronic and programmable electronic systems. An introduction is provided to safety integrity levels (SIL), the safety lifecycle and the requirements needed to achieve a functional safety certificate. Information will be provided on documentation requirements and an introduction to the basic objectives of product design for functional safety.
Wind Generators: the advantages and disadvantagesTorben Haagh
Learn more about the advantages and disadvantages of wind generators by reading this article.
Are you looking for more interesting content on windpower? Take a look here: http://bit.ly/ee-systems-wind-articles
Guideline for the certification of wind turbine service technicians 2015 julyMichael Mattocks
The document discusses guidelines for certifying wind turbine service technicians, including safety rules and cyber security concerns. It outlines the roles of organizations like RenewableUK, the Health & Safety Executive, and certification bodies in developing and enforcing standards for wind turbine safety. Technicians must be aware of statutory regulations and the importance of cyber security for wind farm control systems, as unauthorized access could disrupt controls and endanger safety.
Guideline for the Chartered Certification WTSR of Wind Turbine Service Techni...Michael Mattocks
The document discusses guidelines for certifying wind turbine service technicians, including safety rules and cybersecurity concerns. It outlines the roles of organizations like RenewableUK, the Health & Safety Executive, and WindHSE.org in developing wind turbine safety standards. The Wind Turbine Safety Rules version 3 include guidelines around high voltage boundaries and transformers. The document also warns that industrial control systems like those used in wind turbines are vulnerable to cyber attacks, referencing malware like Stuxnet that have targeted these systems in the past. Technicians must be aware of cybersecurity protocols to safely operate and maintain wind farm equipment.
Similar to Health and safety training standards and requirements for personnel in the offshore wind power industry (20)
Join us at the Wind Turbine Towers Conference to stay competitive by learning advanced #tower concepts and by getting a global perspective of the wind energy sector! Taking place between 27 – 29 August 2019, at Swissôtel in Bremen, Germany. Bitly: http://bit.ly/SS_Wind_Turbine_Towers_Agenda
Be there at the ISO26262 Conference on the 25-28 March 2019 at the Holiday Inn, Munich City Center, Germany. Confirmed speakers from Delphi Technologies, Toyota Research Institute, Texas Instruments. Read the details here: http://bit.ly/2Esno5h
Would you like to know how SOTIF addresses possible hazards caused by intended behavior? Discuss the first draft of the SOTIF standard with international working group members and functional safety experts during the SOTIF Conference. Find out more here: http://bit.ly/SOTIF_Agenda_2019
Daimler, Audi, and Volvo, at Advanced E-Motor - Advanced E-Motor Technology C...Torben Haagh
Preview of the 7th E-Motor Conference 2019 Agenda, taking place at the Hotel Palace Berlin. Get the full Agenda here: http://bit.ly/E-Motor_Agenda_2019
Volkswagen, Ford, and PSA Group - Intelligent Automotive Lighting Agenda 2019Torben Haagh
Have a glimpse of the next years Intelligent Automotive Lighting Conference. Join us on the 20-22 February 2019 at the Hilton Hotel, Mainz. Download the full Agenda here: http://bit.ly/Automotive_Lighting_Agenda_2019
14th International Conference Innovative Seating 2019Torben Haagh
Get an idea of this year's Innovative Seating Conference topic areas. Download the entire Agenda here and join us at the Conference on 18 - 21 February in Düsseldorf. http://bit.ly/InnovativeSeating2019-Agenda
Agenda - Airport Operational Excellence and Automation 2019, Frankfurt Am Ma...Torben Haagh
Have a sneak peak of the latest agenda, with confirmed speakers from Lufthansa, German Aerospace Center, and Athens International Airport. Download the full agenda for free here:
http://bit.ly/Airport_Excellence_Agenda_2019
Agenda: Interior Cabin Innovation for Automated Vehicles 2019Torben Haagh
This document summarizes an international conference on cabin design for autonomous vehicles to be held from January 29-31, 2019 in Berlin, Germany. The conference will address reshaping vehicle interiors for new mobility experiences and discuss how mobility-as-a-service is changing passenger expectations. Experts from automakers like BMW, Bentley, Peugeot, Fiat, and Volvo will speak on engineering usability, integrating new technologies, and designing for various ownership models. Interactive sessions will provide opportunities for networking with OEMs, suppliers, and designers developing the future of in-vehicle experiences.
First and only technology cutting-edge event in Europe bringing you real cognitive automation use cases from end-users, 12 – 14 March 2019 in Berlin, Germany
Join the event and learn:
• how to deal with unstructured data for better predictive analytics and forecasting
• how to set up an AI or machine learning department with fast results and roll out into the rest of the organization
• how to guarantee Data Readiness, Data Creation and Normalisation
• how to leverage Tensorflow, Keras, Neural Network, Deep learning, and Dataset, for your business success
Meat AI & intelligent robotics experts from YES BANK, UBS, Xing, Alibaba, idealo internet, DHL, Turkcell, Solvay, Unicredit, ieso digital health, Zurich Group, Magic Unicorn Inc., Unbabel, and many more top companies at the Cognitive Automation Conference between 12 - 14 March in Berlin, Germany.
Download the FULL AGENDA to see the entire speaker list, round table sessions, focused workshops and at the following link: http://bit.ly/CognitiveAutomation2019FullAgenda
Präsentation zu Roll-Out Messsysteme Infrastruktur bei EnBWTorben Haagh
In der Präsentation von Herrn Albertsmeyer, Teilprojektleiter ROMI (Roll-Out Messsysteme Infrastruktur) bei Netze BW/EnBW, erfahren Sie, wie der Aufbau der Messsystem-Infrastruktur gelingt. Hier finden Sie die gesamte Präsentation: http://bit.ly/2mGnwDt
Is there potential for robotics in finance and accounting?Torben Haagh
In the presentation, you read about "Robotics in Finance" by Mr. Rode, Project Manager at Allianz. Here you can find the full presentation: http://bit.ly/2DdaNPQ
In der Präsentation des Director General Statistics bei der EZB, lesen Sie mehr über den langfristigen strategischen Ansatz des ESZB bei der Erhebung von Bankdaten. Hier finden Sie die gesamte Präsentation: http://bit.ly/2DkRxnP
Expert interview with Nexans - the 66kV cabling technologyTorben Haagh
Stefaan Mensaert, Product Line Manager Renewables at Nexans gave us the opportunity to talk to him about 66 kV cables, junction boxes and connectors. As an experienced cable manufacturer, he gave us some answers to the following topics:
- Major challenges to overcome in order to deliver 66 kV XLPE insulated submarine cable and the accessories, junction boxes and connectors
- What kind of tests they executed to ensure quality and high performance of 66 kV cabling technology
- Nexans and the Blyth project in the UK
- Future for offshore wind energy 66 kV inter-array cabling
http://bit.ly/2fLLn2c
ENERCON - Energy System Change: Era of Feed-in Tariffs is coming to an endTorben Haagh
Andreas Linder, Grid Integration & SCADA Sales by Enercon gave a presentation about system services by wind energy on last years Digital Data Integration and Management conference.
Have a look at the presentation to get an overview of the following:
- System Change: Status Quo Regulation & projects, examples and rolemodels
- The Energy System: Centralised versus decentralised
- Differentiation minimum requirements versus Services for the Grid
- Control reserve by wind - why not? Status quo - TSOs, IT-Requirements, Regulator
- Advantages and challenges
http://bit.ly/2wDLMe4
Innovative Ansätze im Mahn- und Inkassoprozess - Kundenorientiertes Mahnen in...Torben Haagh
Ralph Rochau, Experte Forderungsmanagement bei der BKW Energie AG gibt Einblicke in drei große Bereiche für innovative Ansätze im Bereich Forderungsmanagement:
- Mahnstrategie/Mahnverfahren
- Kommunikation und Kundenorientierung
- Infrastruktur
Für die komplette Präsentation inklusive der Potenziale und Stolpersteine der einzelnen Bereiche, klicken Sie hier:
http://bit.ly/2qiWLIK
Effizienter mit Kooperationen bei Integra-PartnernTorben Haagh
N-Ergie, enercity & Mainova haben das Projekt „IT-Servicemanagement“ (ITSM) partnerschaftlich umgesetzt - dieses beschreiben und analysieren Frau Dr. Ernst und Herr Lübcke in einer Präsentation, die Sie hier kostenlos herunterladen: http://bit.ly/2n3tIFE
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
3 Simple Steps To Buy Verified Payoneer Account In 2024SEOSMMEARTH
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
How MJ Global Leads the Packaging Industry.pdfMJ Global
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
Industrial Tech SW: Category Renewal and CreationChristian Dahlen
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
Digital Marketing with a Focus on Sustainabilitysssourabhsharma
Digital Marketing best practices including influencer marketing, content creators, and omnichannel marketing for Sustainable Brands at the Sustainable Cosmetics Summit 2024 in New York
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....Lacey Max
“After being the most listed dog breed in the United States for 31
years in a row, the Labrador Retriever has dropped to second place
in the American Kennel Club's annual survey of the country's most
popular canines. The French Bulldog is the new top dog in the
United States as of 2022. The stylish puppy has ascended the
rankings in rapid time despite having health concerns and limited
color choices.”
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Tastemy Pandit
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...my Pandit
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
Company Valuation webinar series - Tuesday, 4 June 2024FelixPerez547899
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
Company Valuation webinar series - Tuesday, 4 June 2024
Health and safety training standards and requirements for personnel in the offshore wind power industry
1. Health and safety training standards and requirements
for personnel in the offshore wind power industry
Introduction
With the rapid growth of the wind power industry in recent years, and the expected
continued expansion to meet EU targets by 2050, the sector is in danger of suffering a skills
shortage throughout the various types of employment within the industry.
The EWEA’s wind at work report of 2009 (1) concluded that on average 15.1 jobs for a year
are created in the EU for every MW of power installed per year, and 0.4 long term jobs are
created per MW of cumulative capacity in operations and maintenance and other activities.
The EWEA data from 2007 showed that 108,000 people were employed in the wind industry
throughout the EU; 37% of which were employed by wind turbine manufacturers and 22%
by component suppliers. The report also estimated that a further 42,000 people were
employed indirectly as a result of the wind energy industry; making it responsible for
150,000 jobs in total. That figure is expected to double by 2020, based on estimates of a
total of 180GW of installed wind power, and half of those jobs are expected to be based
offshore.
Source: Siemens press picture
-----------------------------------------------------------------------------------------------------------------------------
IQPC GmbH | Friedrichstr. 94 | D-10117 Berlin, Germany
t: +49 (0) 30 2091 3330 | f: +49 (0) 30 2091 3263 | e: eq@iqpc.de | w: www.iqpc.de
Visit IQPC for a portfolio of topic-related events, congresses, seminars and conferences: www.iqpc.de
2. RenewableUK (formerly the BWEA) studies in 2008 showed that 5,000 people were
employed in the UK in the wind power industry (2). With an expected increase to 34GW of
installed power by 2020, the employment figure is estimated to rise to 57,000. Among the
professions to be singled out as being in danger of a shortage were health and safety
specialists.
With the increase in wind energy continuing over the coming decades the shortage of
skilled staff is an issue which the industry must address, and one of the key issues within
that shortage is developing not only the safety standards for these employees to work to,
but the professionals to implement and uphold those standards.
Wind energy specific health and safety issues
Due to the specific nature of the operation of a wind farm there are several issues that
relate particularly to the wind industry, although some of the types of work, and therefore
guidelines, can be borrowed from other more established industries. RenewableUK is one of
the leading organisations in Europe in terms of training for health and safety on offshore
wind farms. It details some of the specific issues in its model training course, designed to
assist with training to aid implementation of the WTSR’s (Wind Turbine Safety Rules) (3),
and in its Approved training standard for ‘Working at Height and Rescue – Wind Turbines’
(4).
The model training course breaks down the areas of health and safety to be considered into
to clear sections:
• The wind turbine, its plant, and its associated low voltage (LV) infrastructure. Low
voltage means equal to, or less than 1000V AC / 1500V DC. The WTSR’s apply to
this section.
• The high voltage (HV) infrastructure, where high voltage is greater than 1000V AC /
1500V DC. Separate HV rules apply to this section.
The plant includes the mechanical parts, and the low voltage apparatus includes the
electrical parts. Safety issues within these systems include rotating parts, temperature and
-----------------------------------------------------------------------------------------------------------------------------
IQPC GmbH | Friedrichstr. 94 | D-10117 Berlin, Germany
t: +49 (0) 30 2091 3330 | f: +49 (0) 30 2091 3263 | e: eq@iqpc.de | w: www.iqpc.de
Visit IQPC for a portfolio of topic-related events, congresses, seminars and conferences: www.iqpc.de
3. pressure; low voltage electricity; and substances such as chemicals and lubricants. The
electro-mechanical systems are considered to be relatively simple and are virtually identical
in each turbine. They are usually operated on by small working parties, often in isolated
locations; and most of the work is isolated to one turbine not affecting others on the wind
farm. The dangers are associated with either the system itself or the work environment and
in the vicinity of the work yet not related to the actual tasks being carried out.
The ‘Working at Height and Rescue’ approved training standards cover wind turbine specific
issues such as, pre-entry, entry, ascending and descending within the tower and base,
working in the yaw platform, and working in or on the nacelle. The training standards
include detail on the use of harnesses, work positioning, work restraint, inertia reels,
lanyards and shock absorbers (including calculation of clearance distances), placement of
anchors and suitability of anchor points, CE markings and applicable EN standards, the
principles and methods of 100% attachment, and working at height PPE and restraint
equipment. The standards also set out training on emergency rescue techniques related to
wind turbines, including the selection, inspection and use of rescue equipment, rescue
techniques for recovery of a casualty (both conscious and unconscious) from a vertical
ladder and from the nacelle side, rescue from within or on the side of the hub, and casualty
handling techniques.
Common types of offshore incidents
The Offshore Safety Division (OSD) produced a report for the Health and Safety laboratory
in 2009, relating to the underlying causes of offshore incidents (5). The aim of which was to
identify the causes of offshore incidents which resulted in fatalities, major injuries and
major dangerous occurrences, and to determine any trends arising from the research. They
analyzed 67 major incidents, of which 5 resulted in fatalities and 62 resulted in major
injuries. The findings are of benefit to the wind industry as it looks to improve on the health
and safety measures it can take to prevent these types of occurrence.
-----------------------------------------------------------------------------------------------------------------------------
IQPC GmbH | Friedrichstr. 94 | D-10117 Berlin, Germany
t: +49 (0) 30 2091 3330 | f: +49 (0) 30 2091 3263 | e: eq@iqpc.de | w: www.iqpc.de
Visit IQPC for a portfolio of topic-related events, congresses, seminars and conferences: www.iqpc.de
4. They found that the predominant injury was a fracture, and that younger workers were
involved in fewer incidents than older workers. 11 were aged 21-30, 18 from 31-40, 17
from 41-50, and 15 from the 51-60 age group. It was also noted that the majority of the
injured parties, 42, worked for a contractor, where only 25 worked for the installation
operator.
The most common incidents were:
• Struck by a moving, flying or falling object; the injury sustained by the impact.
• Injured while handling, lifting or carrying equipment.
• Falls from height.
• Slips or falls on the same level.
The most common underlying causes of reported incidents were interpreted as:
• Inadequate risk assessment or hazard analysis.
• Lack of supervision.
• Lack of, or inadequate operating procedures.
• Inadequacies in permit-to-work.
The report recommended targeted inspection activity in several issues; permit-to-work,
supervision, monitoring, audit and review, operating procedures, planning and
implementation, reference to MHSWR (Management of Health and Safety at Work
Regulations), and reference to LOLER (Lifting Operations and Lifting Equipment
Regulations).
Want to learn more about health and safety standards for the offshore wind
power industry?
Visit our download centre for more articles, white papers and interviews:
http://bit.ly/hse-offshore
-----------------------------------------------------------------------------------------------------------------------------
IQPC GmbH | Friedrichstr. 94 | D-10117 Berlin, Germany
t: +49 (0) 30 2091 3330 | f: +49 (0) 30 2091 3263 | e: eq@iqpc.de | w: www.iqpc.de
Visit IQPC for a portfolio of topic-related events, congresses, seminars and conferences: www.iqpc.de