The construction of high-performance industrial
flooring can be tricky when there are access,
width and load restrictions to be considered.
This is the case on such sites as underground
areas and raised platforms in which cumbersome
and heavy laying machinery cannot be used and
flooring thickness is restricted.
BoxJoin Corporation has developed an innovative "Sliding Open Top" container design. The design features roof bows fitted with rollers that run along an interior track, allowing the entire roof assembly to be slid open for easier loading/unloading without risk of losing parts. Trials show quicker cargo handling and reduced maintenance costs compared to standard open top designs. The sliding design costs $200 more initially but saves $200 annually in repairs. BoxJoin is marketing the containers internationally and offering trials.
Eindhoven Havalimanı Otoparkının Neden Çöktüğüne Dair Teknik RaporYusuf Yıldız
27 Mayıs 2017 tarihinde inşaat aşamasındayken çöken Eindhoven Havalimanı otoparkının neden çöktüğüne dair hazırlanan teknik rapor.
İçerik dili: İngilizce
This is about how you would use the drive in method for installing a sand spear
Q1- What is a Sand spear point bore,
Q2- How does a Sandspears work,
Q3- Can I install this myself,
Q4- What other names is a Sandspear called,
Q5- What sizes do they come in,
Q6- What materials are they made from,
Q7- Do I need a License to install my sand spear,
Q8- What size sand spears are available,
Q9- What Installations methods are there,
Q10- What’s the best Sandspear,
Q11- Will they remove salt,
Q12- How do I install my Sand spear,
Q13- Difference between PVC Sandspear and the Stainless sand spear,
Q14- Do I need a license to drill a Sandspear,
Q15- How much water can I pump from a sand spear,
Q16- How much do they cost,
Q17- Do my Sandspears come with a guarantee,
Q18- How to I get the water out of the screen,
Q19- Can I drink the water,
Q20- Where do I connect my pump to my Sandspear,
Q21- How deep do I set my sand spear,
Q22- Why do I need to develop a bore,
Q23- How do I develop my bore,
Q24- Have you sold many Sandspears,
Q25- What materials are Sandspears made from,
Q26- What accessories do you sell,
Q27- What accessories do I need for my Sandspear installation,
Q28- Can I buy my Sandspear online,
Q29- Do Sandspears and installation tools come in a kit
Q30- Do you deliver and where,
Q31- Where do I get help on my Sandspear issues,
Q32- Can I access water from a beach,
Q33- Is there a situation where a Sandspear cannot be installed,
Q34- Is there any other costs with having a sand spear bore,
Q35- What are the benefits of having a Sand spear installation,
Q36- Do I have to pay for the water I use from my Sand spear bore,
Q37- What else can I use this water for,
Q38- Is there anything that will need replacing,
Q39- How long do they last in the ground,
Q39- What locations are best suited for a Sandspear installation,
Q40- What types of Sandspears are there,
Q41- What open aperture width of my screen do I need,
Q42- What is the best pump to use in my Sandspear Installation,
Q43- What is the best pump to use in my Sandspear Installation,
Q44- What type of pump do I use for my sand spear bore,
Q45- Can I make a sand-spear myself,
Q46- Does my Sandspear need maintenance or an inspection,
Q47- What are the best drilling methods for Sand,
Q48 – How deep do I have to go to find water,
Q49- What is the best Sandspear,
Q50- What is the best pump for mu Sandspear bore,
Q51- What is the easiest installation methods of my sand spear,
Q52- Can I auger through the sand to reach my depth needed,
Q53- What would it cost if I got a professional in to drill or install my sand-spear,
Q54- My Pump will not keep primed,
Q55- Can I make my own Bailer for my Sandspear bore,
Q56- Where have you sold sand spears to,
Q57 – What pump do we recommend,
Q58- How much water can I expect from a Sandspear installation,
Q59- I don’t have electricity available, how can I get water out from my Sandspear Installation,
This document provides guidelines for identifying components and installing a flood gate unit. It identifies the gate, gate pan, installation bracket, and gate unit. It then lists 18 steps for installation, including identifying rough opening dimensions, excavating, placing structural footing and drain, setting and leveling the gate unit, anchoring it, and finishing with concrete, grout, and paint. Proper installation is estimated to take a 4 person crew 3 days, with setting and anchoring the gate unit taking 1.5 days. Contact information is provided for technical assistance.
The Sinus Slide joint as final solution - Kaushal ParikhELSCC
You cannot avoid joints in an industrial floor. The inevitable shrinkage as a result of the drying process of the concrete must be taken up by expansion joints. Each joint is a critical area in an industrial floor. Therefore you must try to limit the quantity of joints.
The document discusses an engineering model for designing industrial floors using Cosinus Slide® joint technology. The model enhances stability and ongoing usability by transferring load through staggered sinusoidal steel plates into reinforced concrete columns, rather than through the joint. This allows withstanding shocks from forklifts regardless of speed. In particular, it addresses issues with small, hard synthetic wheels that standard models do not consider but which cause heavy shocks damaging floors and joints. The Cosinus Slide® joint and engineering model are shown to eliminate these problems and ensure stability and ongoing usability.
The construction of high-performance industrial
flooring can be tricky when there are access,
width and load restrictions to be considered.
This is the case on such sites as underground
areas and raised platforms in which cumbersome
and heavy laying machinery cannot be used and
flooring thickness is restricted.
BoxJoin Corporation has developed an innovative "Sliding Open Top" container design. The design features roof bows fitted with rollers that run along an interior track, allowing the entire roof assembly to be slid open for easier loading/unloading without risk of losing parts. Trials show quicker cargo handling and reduced maintenance costs compared to standard open top designs. The sliding design costs $200 more initially but saves $200 annually in repairs. BoxJoin is marketing the containers internationally and offering trials.
Eindhoven Havalimanı Otoparkının Neden Çöktüğüne Dair Teknik RaporYusuf Yıldız
27 Mayıs 2017 tarihinde inşaat aşamasındayken çöken Eindhoven Havalimanı otoparkının neden çöktüğüne dair hazırlanan teknik rapor.
İçerik dili: İngilizce
This is about how you would use the drive in method for installing a sand spear
Q1- What is a Sand spear point bore,
Q2- How does a Sandspears work,
Q3- Can I install this myself,
Q4- What other names is a Sandspear called,
Q5- What sizes do they come in,
Q6- What materials are they made from,
Q7- Do I need a License to install my sand spear,
Q8- What size sand spears are available,
Q9- What Installations methods are there,
Q10- What’s the best Sandspear,
Q11- Will they remove salt,
Q12- How do I install my Sand spear,
Q13- Difference between PVC Sandspear and the Stainless sand spear,
Q14- Do I need a license to drill a Sandspear,
Q15- How much water can I pump from a sand spear,
Q16- How much do they cost,
Q17- Do my Sandspears come with a guarantee,
Q18- How to I get the water out of the screen,
Q19- Can I drink the water,
Q20- Where do I connect my pump to my Sandspear,
Q21- How deep do I set my sand spear,
Q22- Why do I need to develop a bore,
Q23- How do I develop my bore,
Q24- Have you sold many Sandspears,
Q25- What materials are Sandspears made from,
Q26- What accessories do you sell,
Q27- What accessories do I need for my Sandspear installation,
Q28- Can I buy my Sandspear online,
Q29- Do Sandspears and installation tools come in a kit
Q30- Do you deliver and where,
Q31- Where do I get help on my Sandspear issues,
Q32- Can I access water from a beach,
Q33- Is there a situation where a Sandspear cannot be installed,
Q34- Is there any other costs with having a sand spear bore,
Q35- What are the benefits of having a Sand spear installation,
Q36- Do I have to pay for the water I use from my Sand spear bore,
Q37- What else can I use this water for,
Q38- Is there anything that will need replacing,
Q39- How long do they last in the ground,
Q39- What locations are best suited for a Sandspear installation,
Q40- What types of Sandspears are there,
Q41- What open aperture width of my screen do I need,
Q42- What is the best pump to use in my Sandspear Installation,
Q43- What is the best pump to use in my Sandspear Installation,
Q44- What type of pump do I use for my sand spear bore,
Q45- Can I make a sand-spear myself,
Q46- Does my Sandspear need maintenance or an inspection,
Q47- What are the best drilling methods for Sand,
Q48 – How deep do I have to go to find water,
Q49- What is the best Sandspear,
Q50- What is the best pump for mu Sandspear bore,
Q51- What is the easiest installation methods of my sand spear,
Q52- Can I auger through the sand to reach my depth needed,
Q53- What would it cost if I got a professional in to drill or install my sand-spear,
Q54- My Pump will not keep primed,
Q55- Can I make my own Bailer for my Sandspear bore,
Q56- Where have you sold sand spears to,
Q57 – What pump do we recommend,
Q58- How much water can I expect from a Sandspear installation,
Q59- I don’t have electricity available, how can I get water out from my Sandspear Installation,
This document provides guidelines for identifying components and installing a flood gate unit. It identifies the gate, gate pan, installation bracket, and gate unit. It then lists 18 steps for installation, including identifying rough opening dimensions, excavating, placing structural footing and drain, setting and leveling the gate unit, anchoring it, and finishing with concrete, grout, and paint. Proper installation is estimated to take a 4 person crew 3 days, with setting and anchoring the gate unit taking 1.5 days. Contact information is provided for technical assistance.
The Sinus Slide joint as final solution - Kaushal ParikhELSCC
You cannot avoid joints in an industrial floor. The inevitable shrinkage as a result of the drying process of the concrete must be taken up by expansion joints. Each joint is a critical area in an industrial floor. Therefore you must try to limit the quantity of joints.
The document discusses an engineering model for designing industrial floors using Cosinus Slide® joint technology. The model enhances stability and ongoing usability by transferring load through staggered sinusoidal steel plates into reinforced concrete columns, rather than through the joint. This allows withstanding shocks from forklifts regardless of speed. In particular, it addresses issues with small, hard synthetic wheels that standard models do not consider but which cause heavy shocks damaging floors and joints. The Cosinus Slide® joint and engineering model are shown to eliminate these problems and ensure stability and ongoing usability.
Engineering structure decks are made of carefully formulated concrete but nevertheless
require surface waterproofing to protect their reinforcing or prestressing steel from corrosion.
Polymer bitumen membranes can be used to ensure durable waterproofing, even when the
concrete is cracked. Eurovia’s Hydroplast® sheet is a high-performance solution.
Böllhoff and DELO have developed a new fastening system called ONSERT that allows for quick and reliable bonding of fastening elements. There are two variants, ONSERT basic and ONSERT plus. ONSERT basic bonds threaded bushes to sheets, circuit boards, and housings using heat-curing or dual-curing adhesives. It provides advantages like preventing leaks and allowing fastening elements to withstand heat without being visible. ONSERT plus bonds fastening elements coated with transparent adhesive to injection molded parts, reducing sink marks and allowing new design possibilities. Both variants offer short curing times, standardized elements, and suitability for automated processing.
The document describes the Zenith model 913 concrete block making machine. It is ideal for economical mass production of high-quality concrete blocks. The machine produces blocks directly onto the ground in lines and is capable of producing hollow, solid, foundation, and chimney blocks. It has outstanding performance both in open areas and buildings. The machine is equipped with hydraulic systems for easy interchange of moulds and turning of the machine at the end of production lines. More than 6,000 of these machines have been installed worldwide.
1) The document describes the MANTO formwork system, which uses large panels, clamps, and connectors to allow for fast and economical concrete forming.
2) A key feature is the aligning panel clamp, which connects panels flush, aligned, and tension resistant in a single operation without need for bracing.
3) The system offers panels up to 3.30 meters high and widths from 30-240 cm, allowing large surfaces to be formed with few joints and ties in a single lift.
This document provides installation instructions for injection hose systems used to seal structural joints in underground concrete structures and tunnels. It describes how to place the hose in the middle of a cold joint and secure it with hose clamps every 15 cm. It also explains that the injection ends should be placed outside the formwork and that ventilation hoses must be fixed to prevent movement during concrete pouring. Finally, it provides specifications for the PREDIMAX and CEM injection hose systems, including dimensions, materials that can be injected, maximum lengths, and characteristics.
RIW Structureseal -Sodium Bentonite System - Typical DetailsRIW Ltd
Structureseal is a waterproofing composite made of a geotextile encapsulating sodium bentonite. It is a pre-applied tanking system that is quick and easy to apply without primers or adhesives. It can waterproof below-grade structures like basements, retaining walls, and ground floors when applied to surfaces like concrete, compacted earth, and sand blinding. When wetted, the sodium bentonite within Structureseal can swell up to 15 times its dry volume to self-seal cracks and form an impervious barrier against water for the life of the structure. Typical applications include backfilled concrete walls, slabs on grade, and various boundary line construction methods.
Sealvia cold microsurfacing is an ultra-thin pavement maintenance technique that can replace traditional surface dressings and thin asphalt layers. It involves applying a 10mm layer of dense graded aggregates and modified bitumen emulsion. Sealvia offers benefits like immediate reopening to traffic, high application rates up to 25,000 square meters per day, and less community disruption. It is a cost-effective maintenance solution for roads experiencing only surface defects.
The document provides information about a construction project taking place at Opus Lake Vicinity in Cyberjaya, Malaysia. It includes an introduction to the site, discussions of site safety measures, various plants and machinery being used, details on external work like drainage systems and roadwork, and explanations of setting out and earthwork processes. The contents page outlines 8 sections that will be covered related to different stages of the construction project.
The document provides information about the construction of a building project located in Opus Lake Vicinity, Cyberjaya. It includes an introduction to the site, discussions of site safety measures, various plants and machinery used, external work including drainage systems and roadwork, the setting out process, and foundations. Scaffolding, signage, personal protective equipment, excavators, backhoes, cranes, compactors, and cement mixers are some of the equipment described. Steps like installing drainage pipes, constructing temporary fences, and laying out baselines are also outlined.
The document provides information about building and construction materials sourced from Flanders, Belgium. It begins by introducing Flanders Investment & Trade, the agency that promotes Flanders' international economic policy. It then provides details about various building products manufactured in Flanders, including roofing materials, conservatory glazing, translucent sheeting, precast concrete floors, lightweight steel roofing panels, and precast concrete elements. Regular updates on sourcing suppliers in Flanders can be found on their website.
This document summarizes information about U-Boot® Beton, a recycled polypropylene formwork system used to create lightweight reinforced concrete slabs and rafts. It provides details on the product specifications, applications, advantages, and installation photos. The formwork allows creating voided slab structures that reduce concrete and steel usage, provide large spans, and increase architectural freedom. Benefits include lighter structures, cost savings, improved acoustics and seismic performance, and easier construction.
Teco manufactures commercial grain storage silos including flat bottom silos and hopper bottom silos. They provide details on their silo designs and capacities. Teco also discusses grain bin components like roofs, ladders, platforms, doors, and unloading augers. The document provides specifications and details on Teco's commercial grain storage systems and silos.
Our formwork cones, has two main functions, the first is to create a guide with a PVC tube to allow the threaded bar (which allow the formwork to stay parallel), to go trough the width of the wall and avoid it from getting stuck once dry.
PROFILE DE ROST DE CONTROL DILATATIE PARDOSELI CERAMICEREDA SRL
The document discusses control joints for adhesive affixed tiles. It describes Serie 1600 control joints, which are made of a flexible rubber insert bonded to metal corners. They are used to partition tile floors up to 30mm thick. The joints absorb stresses in industrial and commercial floors. They are generally installed in bays between 25-60m2. Serie 1600 joints are available in heights from 3mm to 30mm and widths of 10mm. The document also briefly describes Serie 1700, Serie Eco 600 and Serie Luxe 2700 control joints.
Cementflex is a two component, polymer modified, flexible, cement based, waterproof coating for concrete and masonry.
Find out more here:
http://www.riw.co.uk/products/cement-based-systems/cementflex
UNITEK is a leading manufacturer of crosshead technology for the cable extrusion industry. Their product line includes fixed centered crossheads for single, dual, and triple layer extrusion, as well as accessories like automatic color changing systems, cartridges, tools, and bypasses. They have over 800 customers globally and aim to provide innovative solutions to increase productivity for cable manufacturers.
The document describes a point connection system called Greenflex for precast insulated sandwich panels. Greenflex is made of glass fiber reinforced polymer and connects the two layers of insulated sandwich panels. It comes in three heights and thicknesses to fit various panel geometries up to 13 meters long and 3.5 meters wide. Greenflex allows for fast and flexible installation, reduces thermal bridging, and permits thermal expansion of the external panel layer while keeping the layers connected as a composite panel. It enhances insulation and reduces costs.
The document contains plans and specifications for the ground floor of a proposed leisure centre. It includes a ground floor plan showing the layout and dimensions of the various spaces including a 25m pool, leisure pool, sports hall, changing village, reception area and squash courts. It also includes a door schedule listing the doors on the ground floor along with general notes specifying building regulations and standards to be followed for construction including fire resistance ratings for structural elements.
The document describes Block Transformers, a ready-made building solution that can be assembled in one hour. The Block Transformers are transported compactly but expand to provide 28.4 square meters of living space. They transform using a "butterfly" principle where the roof panels lift, floor panels are put in place, and wall panels lift from the floor. Block Transformers have advantages such as low transportation costs, quick assembly time, reusability, and reasonable price, making them suitable for temporary housing in various situations such as after natural disasters or for exhibitions.
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...Zilliz
Join us to introduce Milvus Lite, a vector database that can run on notebooks and laptops, share the same API with Milvus, and integrate with every popular GenAI framework. This webinar is perfect for developers seeking easy-to-use, well-integrated vector databases for their GenAI apps.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Engineering structure decks are made of carefully formulated concrete but nevertheless
require surface waterproofing to protect their reinforcing or prestressing steel from corrosion.
Polymer bitumen membranes can be used to ensure durable waterproofing, even when the
concrete is cracked. Eurovia’s Hydroplast® sheet is a high-performance solution.
Böllhoff and DELO have developed a new fastening system called ONSERT that allows for quick and reliable bonding of fastening elements. There are two variants, ONSERT basic and ONSERT plus. ONSERT basic bonds threaded bushes to sheets, circuit boards, and housings using heat-curing or dual-curing adhesives. It provides advantages like preventing leaks and allowing fastening elements to withstand heat without being visible. ONSERT plus bonds fastening elements coated with transparent adhesive to injection molded parts, reducing sink marks and allowing new design possibilities. Both variants offer short curing times, standardized elements, and suitability for automated processing.
The document describes the Zenith model 913 concrete block making machine. It is ideal for economical mass production of high-quality concrete blocks. The machine produces blocks directly onto the ground in lines and is capable of producing hollow, solid, foundation, and chimney blocks. It has outstanding performance both in open areas and buildings. The machine is equipped with hydraulic systems for easy interchange of moulds and turning of the machine at the end of production lines. More than 6,000 of these machines have been installed worldwide.
1) The document describes the MANTO formwork system, which uses large panels, clamps, and connectors to allow for fast and economical concrete forming.
2) A key feature is the aligning panel clamp, which connects panels flush, aligned, and tension resistant in a single operation without need for bracing.
3) The system offers panels up to 3.30 meters high and widths from 30-240 cm, allowing large surfaces to be formed with few joints and ties in a single lift.
This document provides installation instructions for injection hose systems used to seal structural joints in underground concrete structures and tunnels. It describes how to place the hose in the middle of a cold joint and secure it with hose clamps every 15 cm. It also explains that the injection ends should be placed outside the formwork and that ventilation hoses must be fixed to prevent movement during concrete pouring. Finally, it provides specifications for the PREDIMAX and CEM injection hose systems, including dimensions, materials that can be injected, maximum lengths, and characteristics.
RIW Structureseal -Sodium Bentonite System - Typical DetailsRIW Ltd
Structureseal is a waterproofing composite made of a geotextile encapsulating sodium bentonite. It is a pre-applied tanking system that is quick and easy to apply without primers or adhesives. It can waterproof below-grade structures like basements, retaining walls, and ground floors when applied to surfaces like concrete, compacted earth, and sand blinding. When wetted, the sodium bentonite within Structureseal can swell up to 15 times its dry volume to self-seal cracks and form an impervious barrier against water for the life of the structure. Typical applications include backfilled concrete walls, slabs on grade, and various boundary line construction methods.
Sealvia cold microsurfacing is an ultra-thin pavement maintenance technique that can replace traditional surface dressings and thin asphalt layers. It involves applying a 10mm layer of dense graded aggregates and modified bitumen emulsion. Sealvia offers benefits like immediate reopening to traffic, high application rates up to 25,000 square meters per day, and less community disruption. It is a cost-effective maintenance solution for roads experiencing only surface defects.
The document provides information about a construction project taking place at Opus Lake Vicinity in Cyberjaya, Malaysia. It includes an introduction to the site, discussions of site safety measures, various plants and machinery being used, details on external work like drainage systems and roadwork, and explanations of setting out and earthwork processes. The contents page outlines 8 sections that will be covered related to different stages of the construction project.
The document provides information about the construction of a building project located in Opus Lake Vicinity, Cyberjaya. It includes an introduction to the site, discussions of site safety measures, various plants and machinery used, external work including drainage systems and roadwork, the setting out process, and foundations. Scaffolding, signage, personal protective equipment, excavators, backhoes, cranes, compactors, and cement mixers are some of the equipment described. Steps like installing drainage pipes, constructing temporary fences, and laying out baselines are also outlined.
The document provides information about building and construction materials sourced from Flanders, Belgium. It begins by introducing Flanders Investment & Trade, the agency that promotes Flanders' international economic policy. It then provides details about various building products manufactured in Flanders, including roofing materials, conservatory glazing, translucent sheeting, precast concrete floors, lightweight steel roofing panels, and precast concrete elements. Regular updates on sourcing suppliers in Flanders can be found on their website.
This document summarizes information about U-Boot® Beton, a recycled polypropylene formwork system used to create lightweight reinforced concrete slabs and rafts. It provides details on the product specifications, applications, advantages, and installation photos. The formwork allows creating voided slab structures that reduce concrete and steel usage, provide large spans, and increase architectural freedom. Benefits include lighter structures, cost savings, improved acoustics and seismic performance, and easier construction.
Teco manufactures commercial grain storage silos including flat bottom silos and hopper bottom silos. They provide details on their silo designs and capacities. Teco also discusses grain bin components like roofs, ladders, platforms, doors, and unloading augers. The document provides specifications and details on Teco's commercial grain storage systems and silos.
Our formwork cones, has two main functions, the first is to create a guide with a PVC tube to allow the threaded bar (which allow the formwork to stay parallel), to go trough the width of the wall and avoid it from getting stuck once dry.
PROFILE DE ROST DE CONTROL DILATATIE PARDOSELI CERAMICEREDA SRL
The document discusses control joints for adhesive affixed tiles. It describes Serie 1600 control joints, which are made of a flexible rubber insert bonded to metal corners. They are used to partition tile floors up to 30mm thick. The joints absorb stresses in industrial and commercial floors. They are generally installed in bays between 25-60m2. Serie 1600 joints are available in heights from 3mm to 30mm and widths of 10mm. The document also briefly describes Serie 1700, Serie Eco 600 and Serie Luxe 2700 control joints.
Cementflex is a two component, polymer modified, flexible, cement based, waterproof coating for concrete and masonry.
Find out more here:
http://www.riw.co.uk/products/cement-based-systems/cementflex
UNITEK is a leading manufacturer of crosshead technology for the cable extrusion industry. Their product line includes fixed centered crossheads for single, dual, and triple layer extrusion, as well as accessories like automatic color changing systems, cartridges, tools, and bypasses. They have over 800 customers globally and aim to provide innovative solutions to increase productivity for cable manufacturers.
The document describes a point connection system called Greenflex for precast insulated sandwich panels. Greenflex is made of glass fiber reinforced polymer and connects the two layers of insulated sandwich panels. It comes in three heights and thicknesses to fit various panel geometries up to 13 meters long and 3.5 meters wide. Greenflex allows for fast and flexible installation, reduces thermal bridging, and permits thermal expansion of the external panel layer while keeping the layers connected as a composite panel. It enhances insulation and reduces costs.
The document contains plans and specifications for the ground floor of a proposed leisure centre. It includes a ground floor plan showing the layout and dimensions of the various spaces including a 25m pool, leisure pool, sports hall, changing village, reception area and squash courts. It also includes a door schedule listing the doors on the ground floor along with general notes specifying building regulations and standards to be followed for construction including fire resistance ratings for structural elements.
The document describes Block Transformers, a ready-made building solution that can be assembled in one hour. The Block Transformers are transported compactly but expand to provide 28.4 square meters of living space. They transform using a "butterfly" principle where the roof panels lift, floor panels are put in place, and wall panels lift from the floor. Block Transformers have advantages such as low transportation costs, quick assembly time, reusability, and reasonable price, making them suitable for temporary housing in various situations such as after natural disasters or for exhibitions.
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...Zilliz
Join us to introduce Milvus Lite, a vector database that can run on notebooks and laptops, share the same API with Milvus, and integrate with every popular GenAI framework. This webinar is perfect for developers seeking easy-to-use, well-integrated vector databases for their GenAI apps.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...Neo4j
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentations
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Building RAG with self-deployed Milvus vector database and Snowpark Container...Zilliz
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
20 Comprehensive Checklist of Designing and Developing a WebsitePixlogix Infotech
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
1. HENGELHOEF CONCRETE JOINTS
A new era in industrial flooring technology
Pagina 1 van 11
Hengelhoefstraat 158 info@hcjoints.be www.hcjoints.eu
B 3600 GENK (Belgium)
Tel +32 89 323980
HC Sinus Slide® joints for lasting repairs in industrial floors
Damaged joints in floors are a real nightmare for every warehouse and facility manager. It is a
source of continuous frustration and annoyance for owners and users of logistic buildings and
warehouses.
Once a jointing problem with damage is arising there is started an irreversible spiral
movement of damage which becomes worse, worse and worse until situation is intolerable.
The damage is not only existent on joint and floor but also material handling equipment,
transported goods and even the forklift operators will be damaged due to liability of
constantly recurring shocks and striking impacts of the wheels.
This vicious circle of damage can only be stopped by lasting repairs which neutralise the
cause of damage. The cause of damage is the striking impact of the passing wheel of the
forklift which will fall in the opening gap of the joint. The solution is to create a situation
where wheels are continuously supported and slide, vibration and shock free, from one floor
slab to another. As this feature is the specific quality of the Sinus Slide® joint, they are
extremely useful for joint repair.
The power of the HC-Sinus Slide® joint is that it neutralises the impact of the shocks of the
striking wheels, which is the cause of damage. With the HC Sinus Slide joint 100 % shock-
and even vibration free transfers are realised, so future damage is impossible.
We have developed 2 kinds of repair solutions which, depending from the damaged situation,
are extremely useful.
2. HENGELHOEF CONCRETE JOINTS
A new era in industrial flooring technology
Pagina 2 van 11
Hengelhoefstraat 158 info@hcjoints.be www.hcjoints.eu
B 3600 GENK (Belgium)
Tel +32 89 323980
1. HC-Sinus Slide® repairs with jointing system
In this case the complete joint needs to be replaced or there is no joint at all between the floor
slabs. The complete joints needs to be replaced if the joint is from dubious quality or there is
so much vertical displacement that a fundamental repair is the only solution. The original
joint normally had the following functions.
•••• Free horizontal expansion and contraction of the industrial floor. As the poured
concrete dries, the inevitable contraction is taken up by the horizontal spreading of
the expansion joint. Once the dilatation process is stabilised the joint only will
expand slightly by extreme fluctuating temperature. The existing joint opening is a
result of the shrinkage movement of the of the concrete slabs. The shrinkage of a
floor slab is strongly dependent on a number of thermal variables as well as the
quality of the concrete. Shrinkage can vary between 0,3 to 0,5 mm/meter. In any
case, an attempt must be made to limit the opening of the joints to a maximum of
20 mm. An indication in normal conditions would be floor sections of 30 to 40
metres. However, the advice of a local expert is always recommended because
shrinkage can vary considerably from country to country due to local
environmental factors and concrete quality. Anyway, the problems of shrinkage
and cracks is under control but there arose a new problem which can be a source of
annoyance, lead to uncomfortable and unsafe work stations and big costs. That
problem is the straight traditional joint opening gap.
•••• Load transfer and the limit of any vertical movement. The construction of the
joint takes care the floor slabs are connected and that any vertical movement is
limited. This principle enables also to realize the necessary load transfer which
gives much better support of the slab and extends its life.
3. HENGELHOEF CONCRETE JOINTS
A new era in industrial flooring technology
Pagina 3 van 11
Hengelhoefstraat 158 info@hcjoints.be www.hcjoints.eu
B 3600 GENK (Belgium)
Tel +32 89 323980
•••• The traditional straight expansion joint provides edge protection which is
however not sufficient by some kind and/or intense traffic
•••• An expansion joint is also suitable for use as day joint profile and a help when
finishing the floor.
Once the shrinkage process is stabilised the only functions of the expansion joints are
horizontal movement of the floor slabs in case of extreme fluctuating temperatures, the
limitation of any vertical movement, load transfer and edge protection. In case of intense
forklift traffic the opening gap of the joints is a source of continuous frustration and will
cause huge costs and problems. The HC Sinus Slide® Joint has a sliding capacity which
enables smooth load transfers and vibration- and shock free wheel crossings on the joint.
You can still see a opening gap but you don’t feel or hear it anymore. So if joint repair is
necessary the HC-Sinus Slide® joint is the only lasting and final solution. If was chosen
for the Sinus Slide® technology by the start of the project no repair would have been
necessary as there would be no damage
The repair has to be done as follows
Saw-cut the concrete full depth on both sides of the damaged joint on a width of
approximately 800 to 1000 mm. Remove carefully the concrete and re-level and re-
compact the sub-base material.
4. HENGELHOEF CONCRETE JOINTS
A new era in industrial flooring technology
Pagina 4 van 11
Hengelhoefstraat 158 info@hcjoints.be www.hcjoints.eu
B 3600 GENK (Belgium)
Tel +32 89 323980
Then drill and fix deformed bars (ø16 x 600 lg) in each concrete slab.
At least 3 dowels per meter in each concrete slab. 300 mm of the dowel must be fixed in
the concrete (ideally with resin anchorage system) and 300 mm must stick out. Put also
special primer on all vertical sides of the concrete slab.
5. HENGELHOEF CONCRETE JOINTS
A new era in industrial flooring technology
Pagina 5 van 11
Hengelhoefstraat 158 info@hcjoints.be www.hcjoints.eu
B 3600 GENK (Belgium)
Tel +32 89 323980
Install a HC Sinus Slide® joint in the middle of the gap opening between the concrete
slabs. Level out the HC Sinus Side® joints down and across. Eventually, weld the dowels
fixed in the concrete slabs to the anchorage system of the HC Sinus Slide joint or use
reinforcing mesh to link dowels and joint connectors.
6. HENGELHOEF CONCRETE JOINTS
A new era in industrial flooring technology
Pagina 6 van 11
Hengelhoefstraat 158 info@hcjoints.be www.hcjoints.eu
B 3600 GENK (Belgium)
Tel +32 89 323980
Then fill up the opening gap with (reinforced) concrete or special repair concrete. Finish
the floor by polishing. It is recommended to use a HC Sinus Slide® joint with 5 mm
foam between the undulated lips to permit a horizontal movement in the two directions
in case of extreme fluctuating temperatures. This repaired jointing system with sliding
capacity will realise optimal smooth load transfers by 100% shock- and even vibration
free wheel crossings. Future damage is almost impossible and unprecedented comfort is
achieved. Yearly savings on forklifts wheels are huge.
7. HENGELHOEF CONCRETE JOINTS
A new era in industrial flooring technology
Pagina 7 van 11
Hengelhoefstraat 158 info@hcjoints.be www.hcjoints.eu
B 3600 GENK (Belgium)
Tel +32 89 323980
8. HENGELHOEF CONCRETE JOINTS
A new era in industrial flooring technology
Pagina 8 van 11
Hengelhoefstraat 158 info@hcjoints.be www.hcjoints.eu
B 3600 GENK (Belgium)
Tel +32 89 323980
9. HENGELHOEF CONCRETE JOINTS
A new era in industrial flooring technology
Pagina 9 van 11
Hengelhoefstraat 158 info@hcjoints.be www.hcjoints.eu
B 3600 GENK (Belgium)
Tel +32 89 323980
2. HC-Sinus Slide® repair joint without jointing system
For repairs on elevated slabs the procedure is similar but there is no need for a complete joint
as the load transfer will be realised by the pre-stressed hollow core slabs or underlying
supporting floor. Also if the connecting jointing system is still in good condition the whole
joint doesn’t need to be removed. What is good can stay in the concrete. You only need to
remove the damaged surface of concrete and joint.
Here our special designed HC-Sinus Slide® repair joint is a sustainable and reliable solution.
This repair joint is standard with 5 mm foam between the undulated plates and with a round
foam on bottom to separate the filling substance.
The repair has to be done as follows
Saw-cut away the concrete on both sides of the joint on a width of approximately 100 to
150 mm and a depth of about 100 mm accordingly to the accessed damage.
Put also special primer on all sides of the concrete slab for good adhesion of filling
substance. Drill some holes in the concrete bottom positioned at the same distance as the
anchorage of the HC-Sinus Slide® repair joint. Install screwed rod trough the
anchorage openings and fix into the drilled holes. Level out the HC Sinus Slide® joints
down and across.
10. HENGELHOEF CONCRETE JOINTS
A new era in industrial flooring technology
Pagina 10 van 11
Hengelhoefstraat 158 info@hcjoints.be www.hcjoints.eu
B 3600 GENK (Belgium)
Tel +32 89 323980
Fill up the opening gap with (reinforced) concrete or special repair concrete and finish
the floor by polishing as soon as possible.
11. HENGELHOEF CONCRETE JOINTS
A new era in industrial flooring technology
Pagina 11 van 11
Hengelhoefstraat 158 info@hcjoints.be www.hcjoints.eu
B 3600 GENK (Belgium)
Tel +32 89 323980