Groschopp 04303 specsheet
•
0 likes•27 views
This document provides specifications for a PM 10816 motor with a rating of 1027 rpm, 9.8 lb-in of torque, and 1.69 amps of current. The motor runs continuously at 77.5% efficiency and can operate between 0 and 1050 rpm while producing between 0 and 42 lb-in of torque. It is a 90v DC motor without a gearbox and was prepared by Groschopp.com on 02/24/14.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 04304 specsheet
This document provides specifications for a PM 10816 motor with a voltage of 90V DC, speed of 1550 RPM, and no gearbox. Key specifications include a rating of 1573 RPM and 9.0 lb-in of torque drawing 2.3 amps of current. The motor has a continuous duty cycle and efficiency of 78.7%. Start/stall conditions are 15.32 amps and 64.20 lb-in of torque. Performance curves are provided showing torque and efficiency over speed. The motor is sold and serviced by Electromate.
Groschopp 04308 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1631 rpm, 9 lb-in of torque, and continuous duty cycle. The motor operates at 130V DC with a no-load speed of 1650 rpm and has an efficiency of 80%. Startup requires 10.86 amps of current and 65 lb-in of torque. Performance curves show torque and efficiency across a range of speeds from 0 to 1800 rpm.
Groschopp 10331 specsheet
This document provides specifications for a PM 6015 motor with a RA 3000T 15:1 ratio gearbox. Key specifications include a voltage of 90V DC, speed of 2500 rpm, output speed of 165.8 rpm, torque of 14.4 lb-in, current of 0.89 amps, and power output of 28 watts. The motor has an efficiency of 70% while the gearbox is 51.5% efficient, resulting in a system efficiency of 36%. Start/stall current is 4 amps with torque of 107.13 lb-in. A graph shows efficiency and speed at varying torque levels. The motor is sold and serviced by Electromate.
Groschopp 02003 specsheet
This document provides specifications for a PM 8014 130V DC motor with a rating of 2637 RPM, 3.8 lb-in of torque, and 1.14 amps of current. Key specifications include a continuous duty cycle, 74.2% efficiency, 8.24 amps and 29.36 lb-in starting current and torque. Charts show torque and efficiency at varying speeds from 0 to 2700 RPM. The motor has no gearbox and was produced by Groschopp.com in 2014.
Groschopp 10328 specsheet
This document provides specifications for a PM 6015 motor with a 90V DC voltage, 2500 RPM speed, and 20:1 ratio RA 2600T gearbox. Key specifications include a 124.3 RPM speed, 12.4lb-in of torque, and 0.89 amps of current at 18 watts of output and 0.0245 HP. The gearbox efficiency is 33.3%, motor is 70.0%, and system efficiency is 23.3%. Start/stall conditions draw 4.00 amps and produce 130.10 lb-in of torque. Performance curves are provided for torque, speed, RPM, and efficiency. The motor is sold and serviced by Electromate.
Groschopp 04300 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 963 RPM and produces 8.9 lb-in of torque while drawing 12.2 amps of current. It has a continuous duty cycle and efficiency of 65.9% for both the motor and overall system. Under start or stall conditions, it draws 54.68 amps and produces 44 lb-in of torque. Charts show torque and speed vs RPM and efficiency vs torque for both cold and hot operating temperatures. The motor is sold and serviced by Electromate.
Groschopp 04106 specsheet
The document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency ratings, start/stall conditions, and torque-speed curve. Key details are its 982 RPM speed at 6.8 lb-in of torque drawing 9.81 amps of current.
Groschopp 01009 specsheet
This document provides specifications for a PM 6015 130V DC motor with a rating of 1535 RPM, 2.2 lb-in of torque, and 0.46 amps of current. The motor has no gearbox, runs continuously, and has an efficiency of 67.3%. It can produce up to 8.19 lb-in of torque at startup with 1.59 amps of current. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Recommended
Groschopp 04304 specsheet
This document provides specifications for a PM 10816 motor with a voltage of 90V DC, speed of 1550 RPM, and no gearbox. Key specifications include a rating of 1573 RPM and 9.0 lb-in of torque drawing 2.3 amps of current. The motor has a continuous duty cycle and efficiency of 78.7%. Start/stall conditions are 15.32 amps and 64.20 lb-in of torque. Performance curves are provided showing torque and efficiency over speed. The motor is sold and serviced by Electromate.
Groschopp 04308 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1631 rpm, 9 lb-in of torque, and continuous duty cycle. The motor operates at 130V DC with a no-load speed of 1650 rpm and has an efficiency of 80%. Startup requires 10.86 amps of current and 65 lb-in of torque. Performance curves show torque and efficiency across a range of speeds from 0 to 1800 rpm.
Groschopp 10331 specsheet
This document provides specifications for a PM 6015 motor with a RA 3000T 15:1 ratio gearbox. Key specifications include a voltage of 90V DC, speed of 2500 rpm, output speed of 165.8 rpm, torque of 14.4 lb-in, current of 0.89 amps, and power output of 28 watts. The motor has an efficiency of 70% while the gearbox is 51.5% efficient, resulting in a system efficiency of 36%. Start/stall current is 4 amps with torque of 107.13 lb-in. A graph shows efficiency and speed at varying torque levels. The motor is sold and serviced by Electromate.
Groschopp 02003 specsheet
This document provides specifications for a PM 8014 130V DC motor with a rating of 2637 RPM, 3.8 lb-in of torque, and 1.14 amps of current. Key specifications include a continuous duty cycle, 74.2% efficiency, 8.24 amps and 29.36 lb-in starting current and torque. Charts show torque and efficiency at varying speeds from 0 to 2700 RPM. The motor has no gearbox and was produced by Groschopp.com in 2014.
Groschopp 10328 specsheet
This document provides specifications for a PM 6015 motor with a 90V DC voltage, 2500 RPM speed, and 20:1 ratio RA 2600T gearbox. Key specifications include a 124.3 RPM speed, 12.4lb-in of torque, and 0.89 amps of current at 18 watts of output and 0.0245 HP. The gearbox efficiency is 33.3%, motor is 70.0%, and system efficiency is 23.3%. Start/stall conditions draw 4.00 amps and produce 130.10 lb-in of torque. Performance curves are provided for torque, speed, RPM, and efficiency. The motor is sold and serviced by Electromate.
Groschopp 04300 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 963 RPM and produces 8.9 lb-in of torque while drawing 12.2 amps of current. It has a continuous duty cycle and efficiency of 65.9% for both the motor and overall system. Under start or stall conditions, it draws 54.68 amps and produces 44 lb-in of torque. Charts show torque and speed vs RPM and efficiency vs torque for both cold and hot operating temperatures. The motor is sold and serviced by Electromate.
Groschopp 04106 specsheet
The document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency ratings, start/stall conditions, and torque-speed curve. Key details are its 982 RPM speed at 6.8 lb-in of torque drawing 9.81 amps of current.
Groschopp 01009 specsheet
This document provides specifications for a PM 6015 130V DC motor with a rating of 1535 RPM, 2.2 lb-in of torque, and 0.46 amps of current. The motor has no gearbox, runs continuously, and has an efficiency of 67.3%. It can produce up to 8.19 lb-in of torque at startup with 1.59 amps of current. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 10345 specsheet
This document provides specifications for a small DC motor including its voltage, speed, gearbox ratio, output speed, torque, current, power, duty cycle, efficiency rates, start/stall conditions, torque-speed curve, and contact information for the supplier. The motor operates at 115V, turns at 2450rpm, includes a 25:1 gearbox, and has a rated output of 97.7rpm and 7.7lb-in of torque drawing 0.63amps.
Groschopp 10348 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 2500 rpm and 2 pole configuration paired with a RA 2600T 10:1 ratio gearbox. Key specifications include an output speed of 254.8 rpm, torque of 7.8 lb-in, current of 0.66 amps, and power output of 24 watts or 0.0315 HP. The gearbox efficiency is 39.0%, motor efficiency is 73.7%, and system efficiency is 28.7%. Start/stall current is 2.98 amps with 85.21 lb-in of torque. Performance curves show torque, speed, and efficiency at varying RPMs. The motor and gearbox combination is sold and serviced
Groschopp 10349 specsheet
This document provides specifications for a PM 6015 motor with a RA 2600T 15:1 ratio gearbox. Key specifications include a voltage of 130V DC, speed of 2500 rpm, output speed of 169.9 rpm, torque of 11.2 lb-in, current of 0.66 amps, and power output of 23 watts. Charts show torque and speed vs rpm curves as well as efficiency curves for the motor, gearbox, and overall system. The motor, gearbox, and test data were prepared by Groschopp.com and the system can be purchased from Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 04306 specsheet
The document provides specifications for a 115V DC motor. It lists the motor's voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance curves show torque and efficiency at varying speeds from 0 to 1800 RPM. The motor has a continuous duty cycle and is sold and serviced by Electromate.
Groschopp 04307 specsheet
This document provides specifications for a PM 10816 motor including its voltage, speed, rating, torque, current, output, duty cycle, efficiency, start/stall conditions, and torque and efficiency curves plotted against speed. Key specifications include a rating of 2286 rpm and 5.8 lb-in of torque at 71.3% efficiency. It also lists Electromate as the seller and service provider.
Groschopp 04300 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 963 RPM and produces 8.9 lb-in of torque while drawing 12.2 amps of current. It has a continuous duty cycle and efficiency of 65.9% for both the motor and overall system. Under start or stall conditions, it draws 54.68 amps and produces 44 lb-in of torque. Charts show torque and speed vs RPM and efficiency vs torque for both cold and hot operating temperatures. The motor is sold and serviced by Electromate.
Groschopp 04106 specsheet
The document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency ratings, start/stall conditions, and torque-speed curve. Key details are its 982 RPM speed at 6.8 lb-in of torque drawing 9.81 amps of current.
Groschopp 04106 specsheet
The document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency ratings, start/stall conditions, and torque-speed curve. Key details are the motor runs at 982 rpm producing 6.8 lb-in of torque from a 12V power source. It has a continuous duty cycle and efficiency of 69.7% for both the motor and overall system.
Groschopp 02007 specsheet
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Groschopp 02007 specsheet
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Groschopp 02007 specsheet
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 01002 specsheet
This document provides specifications for a PM 6015 motor with a voltage of 90V DC, speed of 2500 rpm, and no gearbox. Key specifications include a rated speed of 2487 rpm, torque of 1.9 lb-in, current of 0.88 amps, power output of 55 watts, and efficiency of 70%. Start/stall conditions are 4 amps current and 9.69 lb-in torque. Performance curves show torque and efficiency over a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 01003 specsheet
This document provides specifications for a PM 6015 130V DC motor with no gearbox that operates at 2500 rpm. Key specifications include a rating of 2548 rpm and 2.0 lb-in of torque drawing 0.64 amps of current. Performance curves show torque and efficiency across a range of speeds from 0 to 2700 rpm. The motor has a startup current of 2.98 amps and startup torque of 10.63 lb-in.
Groschopp 01003 specsheet
This document provides specifications for a PM 6015 130V DC motor with no gearbox that operates at 2500 rpm. Key specifications include a rating of 2548 rpm and 2.0 lb-in of torque drawing 0.64 amps of current. Performance curves show torque and efficiency across a range of speeds from 0 to 2700 rpm. The motor has a startup current of 2.98 amps and startup torque of 10.63 lb-in.
Groschopp 01014 specsheet
This document provides specifications for a PM 6013 motor with a rating of 2533 rpm, 1.3 lb-in of torque, and 0.70 amps of current. The motor has an efficiency of 61.9% and can produce up to 8.75 lb-in of torque during start conditions drawing 3.76 amps of current. Performance curves are provided showing torque, speed, and efficiency over a range of rpm. The motor has no gearbox and is intended for continuous duty operation.
Groschopp 01014 specsheet
This document provides specifications for a PM 6013 motor with a rating of 2533 rpm, 1.3 lb-in of torque, and 0.70 amps of current. The motor has an efficiency of 61.9% and can produce up to 8.75 lb-in of torque during start conditions drawing 3.76 amps of current. Performance curves are provided showing torque, speed, and efficiency over a range of rpm. The motor has no gearbox and is intended for continuous duty operation.
Groschopp 01014 specsheet
This document provides specifications for a PM 6013 motor with a rating of 2533 rpm, 1.3 lb-in of torque, and 0.70 amps of current. The motor has an efficiency of 61.9% and can produce up to 8.75 lb-in of torque during start conditions drawing 3.76 amps of current. Performance charts show torque and efficiency over a range of speeds from 0 to 2700 rpm. The motor has no gearbox and is intended for continuous duty operation.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, and 1.42 amps of current. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start/stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, 1.42 amps of current, and 222 watts of output power. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start or stall conditions. Charts show torque and efficiency at different speeds.
More Related Content
What's hot
Groschopp 10345 specsheet
This document provides specifications for a small DC motor including its voltage, speed, gearbox ratio, output speed, torque, current, power, duty cycle, efficiency rates, start/stall conditions, torque-speed curve, and contact information for the supplier. The motor operates at 115V, turns at 2450rpm, includes a 25:1 gearbox, and has a rated output of 97.7rpm and 7.7lb-in of torque drawing 0.63amps.
Groschopp 10348 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 2500 rpm and 2 pole configuration paired with a RA 2600T 10:1 ratio gearbox. Key specifications include an output speed of 254.8 rpm, torque of 7.8 lb-in, current of 0.66 amps, and power output of 24 watts or 0.0315 HP. The gearbox efficiency is 39.0%, motor efficiency is 73.7%, and system efficiency is 28.7%. Start/stall current is 2.98 amps with 85.21 lb-in of torque. Performance curves show torque, speed, and efficiency at varying RPMs. The motor and gearbox combination is sold and serviced
Groschopp 10349 specsheet
This document provides specifications for a PM 6015 motor with a RA 2600T 15:1 ratio gearbox. Key specifications include a voltage of 130V DC, speed of 2500 rpm, output speed of 169.9 rpm, torque of 11.2 lb-in, current of 0.66 amps, and power output of 23 watts. Charts show torque and speed vs rpm curves as well as efficiency curves for the motor, gearbox, and overall system. The motor, gearbox, and test data were prepared by Groschopp.com and the system can be purchased from Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 04306 specsheet
The document provides specifications for a 115V DC motor. It lists the motor's voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance curves show torque and efficiency at varying speeds from 0 to 1800 RPM. The motor has a continuous duty cycle and is sold and serviced by Electromate.
Groschopp 04307 specsheet
This document provides specifications for a PM 10816 motor including its voltage, speed, rating, torque, current, output, duty cycle, efficiency, start/stall conditions, and torque and efficiency curves plotted against speed. Key specifications include a rating of 2286 rpm and 5.8 lb-in of torque at 71.3% efficiency. It also lists Electromate as the seller and service provider.
What's hot (6)
Similar to Groschopp 04303 specsheet
Groschopp 04300 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 963 RPM and produces 8.9 lb-in of torque while drawing 12.2 amps of current. It has a continuous duty cycle and efficiency of 65.9% for both the motor and overall system. Under start or stall conditions, it draws 54.68 amps and produces 44 lb-in of torque. Charts show torque and speed vs RPM and efficiency vs torque for both cold and hot operating temperatures. The motor is sold and serviced by Electromate.
Groschopp 04106 specsheet
The document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency ratings, start/stall conditions, and torque-speed curve. Key details are its 982 RPM speed at 6.8 lb-in of torque drawing 9.81 amps of current.
Groschopp 04106 specsheet
The document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency ratings, start/stall conditions, and torque-speed curve. Key details are the motor runs at 982 rpm producing 6.8 lb-in of torque from a 12V power source. It has a continuous duty cycle and efficiency of 69.7% for both the motor and overall system.
Groschopp 02007 specsheet
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Groschopp 02007 specsheet
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Groschopp 02007 specsheet
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 01002 specsheet
This document provides specifications for a PM 6015 motor with a voltage of 90V DC, speed of 2500 rpm, and no gearbox. Key specifications include a rated speed of 2487 rpm, torque of 1.9 lb-in, current of 0.88 amps, power output of 55 watts, and efficiency of 70%. Start/stall conditions are 4 amps current and 9.69 lb-in torque. Performance curves show torque and efficiency over a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 01003 specsheet
This document provides specifications for a PM 6015 130V DC motor with no gearbox that operates at 2500 rpm. Key specifications include a rating of 2548 rpm and 2.0 lb-in of torque drawing 0.64 amps of current. Performance curves show torque and efficiency across a range of speeds from 0 to 2700 rpm. The motor has a startup current of 2.98 amps and startup torque of 10.63 lb-in.
Groschopp 01003 specsheet
This document provides specifications for a PM 6015 130V DC motor with no gearbox that operates at 2500 rpm. Key specifications include a rating of 2548 rpm and 2.0 lb-in of torque drawing 0.64 amps of current. Performance curves show torque and efficiency across a range of speeds from 0 to 2700 rpm. The motor has a startup current of 2.98 amps and startup torque of 10.63 lb-in.
Groschopp 01014 specsheet
This document provides specifications for a PM 6013 motor with a rating of 2533 rpm, 1.3 lb-in of torque, and 0.70 amps of current. The motor has an efficiency of 61.9% and can produce up to 8.75 lb-in of torque during start conditions drawing 3.76 amps of current. Performance curves are provided showing torque, speed, and efficiency over a range of rpm. The motor has no gearbox and is intended for continuous duty operation.
Groschopp 01014 specsheet
This document provides specifications for a PM 6013 motor with a rating of 2533 rpm, 1.3 lb-in of torque, and 0.70 amps of current. The motor has an efficiency of 61.9% and can produce up to 8.75 lb-in of torque during start conditions drawing 3.76 amps of current. Performance curves are provided showing torque, speed, and efficiency over a range of rpm. The motor has no gearbox and is intended for continuous duty operation.
Groschopp 01014 specsheet
This document provides specifications for a PM 6013 motor with a rating of 2533 rpm, 1.3 lb-in of torque, and 0.70 amps of current. The motor has an efficiency of 61.9% and can produce up to 8.75 lb-in of torque during start conditions drawing 3.76 amps of current. Performance charts show torque and efficiency over a range of speeds from 0 to 2700 rpm. The motor has no gearbox and is intended for continuous duty operation.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, and 1.42 amps of current. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start/stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, 1.42 amps of current, and 222 watts of output power. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start or stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, 1.42 amps of current, and 222 watts of output power. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start or stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power and produces 108 watts of power at 2575 rpm with 71.7% efficiency. It can output a maximum torque of 28.49 lb-in but requires 11.37 amps of current to start or stall. Charts show the motor's torque and efficiency performance across a range of speeds.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power and produces 108 watts of power at 2575 rpm with 71.7% efficiency. It can output up to 28.49 lb-in of torque when drawing 11.37 amps of current during start/stall conditions. Charts show the motor's torque and efficiency performance at different speeds.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power, produces 108 watts of power, and has a continuous duty cycle and efficiency of 71.7%. Charts show the motor's torque and efficiency output across different speed ranges.
Similar to Groschopp 04303 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Groschopp 04303 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: PM 10816 90 v DC 1050 rpm 2 Poles None Product ID: 4303 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 1027.0 rpm 9.8lb-in 1.69 amps 119 watts 0.1589 HP Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 77.5 % 77.5 % Start/Stall Conditions: Current: Torque: 8.66 amps 52.20 lb-in Constants: Ke: 74.82 v/krpm Kt: 6.32 lb-in/amp Torque (lb-in) Speed RPM Efficiency 150 0 0.0 6.0 300 12.0 450 18.0 600 24.0 750 30.0 900 36.0 1050 42.0 1200 48.0 1350 54.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com