Groschopp 01010 specsheet
•
0 likes•35 views
The document provides specifications for a 12V DC motor. The motor runs at 900 rpm with no gearbox. It has a rated speed of 915 rpm, torque of 1.5 lb-in, current of 2.83 amps, output power of 17 watts, and efficiency of 51.9%. Under start or stall conditions, the motor draws 7.31 amps and produces 4.5 lb-in of torque. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 02007 specsheet
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 01006 specsheet
The document provides specifications for a 12V DC motor. The motor runs at 800 rpm with no gearbox. It has a rated speed of 784 rpm, torque of 2.2 lb-in, current of 3.22 amps, output power of 20 watts, and efficiency of 57.7%. Startup requires 8.15 amps and generates 5.81 lb-in of torque. Charts show torque and efficiency at different speeds.
Groschopp 04300 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 963 RPM and produces 8.9 lb-in of torque while drawing 12.2 amps of current. It has a continuous duty cycle and efficiency of 65.9% for both the motor and overall system. Under start or stall conditions, it draws 54.68 amps and produces 44 lb-in of torque. Charts show torque and speed vs RPM and efficiency vs torque for both cold and hot operating temperatures. The motor is sold and serviced by Electromate.
Groschopp 50100 specsheet
This document provides specifications for a PM 6013 motor with a 60:1 ratio gearbox. The motor runs at 900 rpm and 12 V DC, with an output of 15.3 rpm and 55.5 lb-in of torque. Key specifications listed include current, output power, duty cycle, efficiency rates, start/stall conditions, and torque and speed curves. The motor and gearbox system are sold and serviced by Electromate.
Groschopp 01011 specsheet
This document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output power, efficiency ratings, start/stall conditions, and speed vs. torque and efficiency curves. The motor runs at 2750 rpm without a gearbox, has a maximum torque of 6.31 lb-in, efficiency of 61.1%, and was manufactured by Groschopp.com.
Groschopp 01007 specsheet
This document provides specifications for a PM 6015 motor with a voltage of 90V DC, a speed of 1600 RPM, and no gearbox. Key specifications include a rating of 1565 RPM and 2.1 lb-in of torque at 0.66 amps of current. The motor has a continuous duty cycle and efficiency of 68%. Start/stall conditions are 2.33 amps and 8.25 lb-in of torque. Performance curves show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power and produces 108 watts of power at 2575 rpm with 71.7% efficiency. It can output a maximum torque of 28.49 lb-in but requires 11.37 amps of current to start or stall. Charts show the motor's torque and efficiency performance across a range of speeds.
Recommended
Groschopp 02007 specsheet
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 01006 specsheet
The document provides specifications for a 12V DC motor. The motor runs at 800 rpm with no gearbox. It has a rated speed of 784 rpm, torque of 2.2 lb-in, current of 3.22 amps, output power of 20 watts, and efficiency of 57.7%. Startup requires 8.15 amps and generates 5.81 lb-in of torque. Charts show torque and efficiency at different speeds.
Groschopp 04300 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 963 RPM and produces 8.9 lb-in of torque while drawing 12.2 amps of current. It has a continuous duty cycle and efficiency of 65.9% for both the motor and overall system. Under start or stall conditions, it draws 54.68 amps and produces 44 lb-in of torque. Charts show torque and speed vs RPM and efficiency vs torque for both cold and hot operating temperatures. The motor is sold and serviced by Electromate.
Groschopp 50100 specsheet
This document provides specifications for a PM 6013 motor with a 60:1 ratio gearbox. The motor runs at 900 rpm and 12 V DC, with an output of 15.3 rpm and 55.5 lb-in of torque. Key specifications listed include current, output power, duty cycle, efficiency rates, start/stall conditions, and torque and speed curves. The motor and gearbox system are sold and serviced by Electromate.
Groschopp 01011 specsheet
This document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output power, efficiency ratings, start/stall conditions, and speed vs. torque and efficiency curves. The motor runs at 2750 rpm without a gearbox, has a maximum torque of 6.31 lb-in, efficiency of 61.1%, and was manufactured by Groschopp.com.
Groschopp 01007 specsheet
This document provides specifications for a PM 6015 motor with a voltage of 90V DC, a speed of 1600 RPM, and no gearbox. Key specifications include a rating of 1565 RPM and 2.1 lb-in of torque at 0.66 amps of current. The motor has a continuous duty cycle and efficiency of 68%. Start/stall conditions are 2.33 amps and 8.25 lb-in of torque. Performance curves show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power and produces 108 watts of power at 2575 rpm with 71.7% efficiency. It can output a maximum torque of 28.49 lb-in but requires 11.37 amps of current to start or stall. Charts show the motor's torque and efficiency performance across a range of speeds.
PRASUN RESUME
Prasun Paul provides his resume including academic qualifications, computer proficiency, personal information, and work experience. He has a B.Com. (Hons.) degree from City College of Commerce in Kolkata and is proficient in MS Office, Tally, and SAP. Currently working as an Accountant at Eureka Forbes Limited, his responsibilities include day-to-day accounts, maintaining materials and stock, petty cash vouchering, and sales invoicing. He is looking to increase his current compensation of 2.03 lakhs to 2.40 lakhs.
Cassandra
ProTech Professional Technical Services certified that Selvakumar Jeyakumar of WAL-MART STORES INC completed a comprehensive course of study in Introduction to Cassandra 2, CQL 3, and the Datastax Java Driver from April 4-6, 2016 at their location in Turtle Creek, Pennsylvania.
Alteryx Selvakumar Jeyakumar (3)
ProTech Professional Technical Services certified that Selvakumar Jeyakumar of WAL-MART STORES INC completed a comprehensive intermediate level Alteryx training course from August 17-19, 2016 at their location in Turtle Creek, Pennsylvania.
Carlos Paz
Carlos Paz se encuentra en la provincia de Córdoba, al sur del Valle de Punilla. Fue fundada el 16 de julio de 1913 y declarada ciudad el 16 de julio de 1987. Ofrece vida nocturna con espectáculos, cines y restaurantes, así como paseos por la ciudad como el cerro de la Cruz, donde hay una cruz de 15 metros de altura, y las aerosillas que conducen a una terraza mirador.
Jhonatan stiven muñoz ramírez
Jhonatan Stiven Muñoz Ramírez estudia Ciencias del Deporte y la Recreación en la Universidad Tecnológica de Pereira porque siempre le ha apasionado el tema del deporte y la salud. Sus expectativas son ayudar a personas con discapacidades a mejorar su calidad de vida a través del ejercicio y fomentar su práctica.
Finalaya featured result_15may2014
Tata Steel's net profit for the fourth quarter increased 51.13% to Rs. 1978.64 crore compared to the same period the previous fiscal year. Net sales rose 13.19% while net profit margin improved to 16.23% from 12.16% last year. Earnings per share for the quarter was Rs. 20.39, higher than Rs. 13.02 in the corresponding period of the previous year. The company's stock price on the BSE closed 1.89% higher at Rs. 460.70.
Santa Monica Cochin - Tips For Successful Visa Interview
Useful tips for a successful visa interview. How to succeed in a visa interview.Santa Monica Study Abroad Pvt Ltd providing you some tips that you should follow while giving your visa interview.
Final United Project-1 Final
This document discusses options for a new United Bank credit card, including whether to offer a low-interest rate card or a rewards card. It provides details on the features and requirements of United Bank's current Visa Platinum card, as well as competitors' cards. It also outlines two potential card options - a Simply Low Rates card with introductory and subsequent APRs, and an Earn Rewards card that allows customers to earn points through spending, payments, and other activities that can be redeemed in various ways. The document seeks feedback on how to design the card application process and address any obstacles to approval.
GaneshZilpe_Resume
This document is a resume for Ganesh Zilpe, a software developer with over 3 years of experience. He has expertise in languages like Java, C++, and Python as well as tools like Eclipse and Visual Studio. He has worked as a software developer intern at Edupoint Educational Company and EdTech Software Company, where he developed applications and APIs. He is currently pursuing a Master's degree in Computer Science at Arizona State University.
Tarun Verma Resume
Tarun Verma has a Master's degree in Information Systems from the University of Maryland and a Bachelor's degree in Computer Science from Jaypee University of Information Technology. He has professional experience as a software developer for Infosys Technologies and internships with the US Department of Health and Human Services and Washington Speakers Bureau. His skills include programming languages like C#, SQL, and Python as well as tools like Salesforce, Hadoop, and Microsoft Dynamics CRM.
Math trivia
This document contains math trivia facts organized into different categories such as numbers, geometry, algebra, and more. It provides interesting tidbits about topics in math under each category to engage and educate readers with fun facts from the field of mathematics in a brief and accessible manner. The trivia covers a wide range of math topics presented concisely for anyone wanting to learn more about the subject in a casual way.
future landscape 3
The document describes a graphic equalizer installation that changes colors and sound levels based on detected movement in a city. The intensity of colors and sound increase during the day when there is more movement, and decrease at night when there is less movement. The installation is intended as an artistic building feature or public installation to provide information on busy times and attract different audiences with its visual effects.
Lightweight Rowing Presentation
The document discusses lightweight rowing and issues around weight loss and classification. It summarizes the experiences of three collegiate athletes who died from excessive weight loss for wrestling. It then outlines guidelines established by various athletic organizations to promote safe, gradual weight loss and prevent rapid dehydration among lightweight rowers.
Cualidades de la escritura y estilos de escritura
El documento habla sobre la importancia de la escritura y diferentes estilos de escritura a través de la historia. Resume los orígenes de la escritura sumeria y egipcia, así como la escritura china, fenicia y griega. También describe la escritura clásica, humanística, gótica, cortesana y procesal; resaltando sus características principales.
Groschopp 04303 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1027 rpm, 9.8 lb-in of torque, and 1.69 amps of current. The motor runs continuously at 77.5% efficiency and can operate between 0 and 1050 rpm while producing between 0 and 42 lb-in of torque. It has a no load speed of 1027 rpm, stall torque of 52.2 lb-in, and is supplied by Electromate.
Groschopp 04303 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1027 rpm, 9.8 lb-in of torque, and 1.69 amps of current. The motor runs continuously at 77.5% efficiency and can operate between 0 and 1050 rpm while producing between 0 and 42 lb-in of torque. It is a 90v DC motor without a gearbox and was prepared by Groschopp.com on 02/24/14.
Groschopp 04300 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 963 RPM and produces 8.9 lb-in of torque while drawing 12.2 amps of current. It has a continuous duty cycle and efficiency of 65.9% for both the motor and overall system. Under start or stall conditions, it draws 54.68 amps and produces 44 lb-in of torque. Charts show torque and speed vs RPM and efficiency vs torque for both cold and hot operating temperatures. The motor is sold and serviced by Electromate.
Groschopp 01014 specsheet
This document provides specifications for a PM 6013 motor with a rating of 2533 rpm, 1.3 lb-in of torque, and 0.70 amps of current. The motor has an efficiency of 61.9% and can produce up to 8.75 lb-in of torque during start conditions drawing 3.76 amps of current. Performance curves are provided showing torque, speed, and efficiency over a range of rpm. The motor has no gearbox and is intended for continuous duty operation.
Groschopp 01014 specsheet
This document provides specifications for a PM 6013 motor with a rating of 2533 rpm, 1.3 lb-in of torque, and 0.70 amps of current. The motor has an efficiency of 61.9% and can produce up to 8.75 lb-in of torque during start conditions drawing 3.76 amps of current. Performance curves are provided showing torque, speed, and efficiency over a range of rpm. The motor has no gearbox and is intended for continuous duty operation.
Groschopp 01014 specsheet
This document provides specifications for a PM 6013 motor with a rating of 2533 rpm, 1.3 lb-in of torque, and 0.70 amps of current. The motor has an efficiency of 61.9% and can produce up to 8.75 lb-in of torque during start conditions drawing 3.76 amps of current. Performance charts show torque and efficiency over a range of speeds from 0 to 2700 rpm. The motor has no gearbox and is intended for continuous duty operation.
More Related Content
Viewers also liked
PRASUN RESUME
Prasun Paul provides his resume including academic qualifications, computer proficiency, personal information, and work experience. He has a B.Com. (Hons.) degree from City College of Commerce in Kolkata and is proficient in MS Office, Tally, and SAP. Currently working as an Accountant at Eureka Forbes Limited, his responsibilities include day-to-day accounts, maintaining materials and stock, petty cash vouchering, and sales invoicing. He is looking to increase his current compensation of 2.03 lakhs to 2.40 lakhs.
Cassandra
ProTech Professional Technical Services certified that Selvakumar Jeyakumar of WAL-MART STORES INC completed a comprehensive course of study in Introduction to Cassandra 2, CQL 3, and the Datastax Java Driver from April 4-6, 2016 at their location in Turtle Creek, Pennsylvania.
Alteryx Selvakumar Jeyakumar (3)
ProTech Professional Technical Services certified that Selvakumar Jeyakumar of WAL-MART STORES INC completed a comprehensive intermediate level Alteryx training course from August 17-19, 2016 at their location in Turtle Creek, Pennsylvania.
Carlos Paz
Carlos Paz se encuentra en la provincia de Córdoba, al sur del Valle de Punilla. Fue fundada el 16 de julio de 1913 y declarada ciudad el 16 de julio de 1987. Ofrece vida nocturna con espectáculos, cines y restaurantes, así como paseos por la ciudad como el cerro de la Cruz, donde hay una cruz de 15 metros de altura, y las aerosillas que conducen a una terraza mirador.
Jhonatan stiven muñoz ramírez
Jhonatan Stiven Muñoz Ramírez estudia Ciencias del Deporte y la Recreación en la Universidad Tecnológica de Pereira porque siempre le ha apasionado el tema del deporte y la salud. Sus expectativas son ayudar a personas con discapacidades a mejorar su calidad de vida a través del ejercicio y fomentar su práctica.
Finalaya featured result_15may2014
Tata Steel's net profit for the fourth quarter increased 51.13% to Rs. 1978.64 crore compared to the same period the previous fiscal year. Net sales rose 13.19% while net profit margin improved to 16.23% from 12.16% last year. Earnings per share for the quarter was Rs. 20.39, higher than Rs. 13.02 in the corresponding period of the previous year. The company's stock price on the BSE closed 1.89% higher at Rs. 460.70.
Santa Monica Cochin - Tips For Successful Visa Interview
Useful tips for a successful visa interview. How to succeed in a visa interview.Santa Monica Study Abroad Pvt Ltd providing you some tips that you should follow while giving your visa interview.
Final United Project-1 Final
This document discusses options for a new United Bank credit card, including whether to offer a low-interest rate card or a rewards card. It provides details on the features and requirements of United Bank's current Visa Platinum card, as well as competitors' cards. It also outlines two potential card options - a Simply Low Rates card with introductory and subsequent APRs, and an Earn Rewards card that allows customers to earn points through spending, payments, and other activities that can be redeemed in various ways. The document seeks feedback on how to design the card application process and address any obstacles to approval.
GaneshZilpe_Resume
This document is a resume for Ganesh Zilpe, a software developer with over 3 years of experience. He has expertise in languages like Java, C++, and Python as well as tools like Eclipse and Visual Studio. He has worked as a software developer intern at Edupoint Educational Company and EdTech Software Company, where he developed applications and APIs. He is currently pursuing a Master's degree in Computer Science at Arizona State University.
Tarun Verma Resume
Tarun Verma has a Master's degree in Information Systems from the University of Maryland and a Bachelor's degree in Computer Science from Jaypee University of Information Technology. He has professional experience as a software developer for Infosys Technologies and internships with the US Department of Health and Human Services and Washington Speakers Bureau. His skills include programming languages like C#, SQL, and Python as well as tools like Salesforce, Hadoop, and Microsoft Dynamics CRM.
Math trivia
This document contains math trivia facts organized into different categories such as numbers, geometry, algebra, and more. It provides interesting tidbits about topics in math under each category to engage and educate readers with fun facts from the field of mathematics in a brief and accessible manner. The trivia covers a wide range of math topics presented concisely for anyone wanting to learn more about the subject in a casual way.
future landscape 3
The document describes a graphic equalizer installation that changes colors and sound levels based on detected movement in a city. The intensity of colors and sound increase during the day when there is more movement, and decrease at night when there is less movement. The installation is intended as an artistic building feature or public installation to provide information on busy times and attract different audiences with its visual effects.
Lightweight Rowing Presentation
The document discusses lightweight rowing and issues around weight loss and classification. It summarizes the experiences of three collegiate athletes who died from excessive weight loss for wrestling. It then outlines guidelines established by various athletic organizations to promote safe, gradual weight loss and prevent rapid dehydration among lightweight rowers.
Cualidades de la escritura y estilos de escritura
El documento habla sobre la importancia de la escritura y diferentes estilos de escritura a través de la historia. Resume los orígenes de la escritura sumeria y egipcia, así como la escritura china, fenicia y griega. También describe la escritura clásica, humanística, gótica, cortesana y procesal; resaltando sus características principales.
Viewers also liked (16)
Santa Monica Cochin - Tips For Successful Visa Interview
Santa Monica Cochin - Tips For Successful Visa Interview
Similar to Groschopp 01010 specsheet
Groschopp 04303 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1027 rpm, 9.8 lb-in of torque, and 1.69 amps of current. The motor runs continuously at 77.5% efficiency and can operate between 0 and 1050 rpm while producing between 0 and 42 lb-in of torque. It has a no load speed of 1027 rpm, stall torque of 52.2 lb-in, and is supplied by Electromate.
Groschopp 04303 specsheet
This document provides specifications for a PM 10816 motor with a rating of 1027 rpm, 9.8 lb-in of torque, and 1.69 amps of current. The motor runs continuously at 77.5% efficiency and can operate between 0 and 1050 rpm while producing between 0 and 42 lb-in of torque. It is a 90v DC motor without a gearbox and was prepared by Groschopp.com on 02/24/14.
Groschopp 04300 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 963 RPM and produces 8.9 lb-in of torque while drawing 12.2 amps of current. It has a continuous duty cycle and efficiency of 65.9% for both the motor and overall system. Under start or stall conditions, it draws 54.68 amps and produces 44 lb-in of torque. Charts show torque and speed vs RPM and efficiency vs torque for both cold and hot operating temperatures. The motor is sold and serviced by Electromate.
Groschopp 01014 specsheet
This document provides specifications for a PM 6013 motor with a rating of 2533 rpm, 1.3 lb-in of torque, and 0.70 amps of current. The motor has an efficiency of 61.9% and can produce up to 8.75 lb-in of torque during start conditions drawing 3.76 amps of current. Performance curves are provided showing torque, speed, and efficiency over a range of rpm. The motor has no gearbox and is intended for continuous duty operation.
Groschopp 01014 specsheet
This document provides specifications for a PM 6013 motor with a rating of 2533 rpm, 1.3 lb-in of torque, and 0.70 amps of current. The motor has an efficiency of 61.9% and can produce up to 8.75 lb-in of torque during start conditions drawing 3.76 amps of current. Performance curves are provided showing torque, speed, and efficiency over a range of rpm. The motor has no gearbox and is intended for continuous duty operation.
Groschopp 01014 specsheet
This document provides specifications for a PM 6013 motor with a rating of 2533 rpm, 1.3 lb-in of torque, and 0.70 amps of current. The motor has an efficiency of 61.9% and can produce up to 8.75 lb-in of torque during start conditions drawing 3.76 amps of current. Performance charts show torque and efficiency over a range of speeds from 0 to 2700 rpm. The motor has no gearbox and is intended for continuous duty operation.
Groschopp 02007 specsheet
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Groschopp 02007 specsheet
This document provides specifications for a PM 8014 90V DC motor with a rating of 1006 RPM, 4.3 lb-in of torque, and 0.0678 HP. The motor runs continuously at 59.7% efficiency and can produce up to 18.45 lb-in of torque under start/stall conditions of 3.56 amps of current. Performance charts show torque, speed, and efficiency over various loads. The motor is sold and serviced by Electromate.
Groschopp 50102 specsheet
This document provides specifications for a small DC motor including its voltage, speed, gearbox ratio, torque, current draw, output power, duty cycle, and efficiency ratings. Performance curves are given showing torque, speed, and efficiency over a range of operating conditions. The motor has a continuous duty cycle and peak current of 7.31 amps can produce 390.75 lb-in of torque for starting or stalling.
Groschopp 01008 specsheet
This document provides specifications for a PM 6015 motor with a voltage of 115V, speed of 1300 rpm, and no gearbox. Key specifications include a rating of 1317.9 rpm, 1.6 lb-in of torque, 0.47 amps of current, and 54.3% efficiency. Start/stall conditions are 1.54 amps and 7.81 lb-in of torque. Charts show torque and efficiency at various speeds. The motor is sold and serviced by Electromate.
Groschopp 01008 specsheet
This document provides specifications for a PM 6015 motor with a voltage of 115V, speed of 1300 rpm, and no gearbox. Key specifications include a rating of 1317.9 rpm, 1.6 lb-in of torque, 0.47 amps of current, and 54.3% efficiency. Start/stall conditions are 1.54 amps and 7.81 lb-in of torque. Charts show torque and efficiency at various speeds. The motor is sold and serviced by Electromate.
Groschopp 01013 specsheet
This document provides specifications for a PM 6013 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. Key specifications include a rating of 1685 RPM, torque of 1.4 lb-in, current of 0.54 amps, output of 28 watts and 0.038 HP. The motor has a continuous duty cycle and efficiency of 58.7%. Start/stall conditions are 2.19 amps current and 6.94 lb-in torque. A graph shows torque and efficiency at various speeds. The motor is sold and serviced by Electromate.
Groschopp 01013 specsheet
This document provides specifications for a PM 6013 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. Key specifications include a rated speed of 1685 RPM, torque of 1.4 lb-in, current of 0.54 amps, output power of 28 watts, and efficiency of 58.7%. Start/stall conditions are listed as 2.19 amps current and 6.94 lb-in torque. Charts show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 01013 specsheet
This document provides specifications for a PM 6013 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. Key specifications include a rating of 1685 RPM, torque of 1.4 lb-in, current of 0.54 amps, output of 28 watts and 0.038 HP. The motor has a continuous duty cycle and efficiency of 58.7%. Start/stall conditions are 2.19 amps current and 6.94 lb-in torque. A graph shows torque and efficiency at various speeds. The motor is sold and serviced by Electromate.
Groschopp 01006 specsheet
The document provides specifications for a 12V DC motor. The motor runs at 800 rpm with no gearbox. It has a rated speed of 784 rpm, torque of 2.2 lb-in, current of 3.22 amps, output power of 20 watts, and efficiency of 57.7%. Startup requires 8.15 amps and generates 5.81 lb-in of torque. Charts show torque and efficiency at different speeds.
Groschopp 04106 specsheet
The document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency ratings, start/stall conditions, and torque-speed curve. Key details are its 982 RPM speed at 6.8 lb-in of torque drawing 9.81 amps of current.
Groschopp 04106 specsheet
The document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency ratings, start/stall conditions, and torque-speed curve. Key details are its 982 RPM speed at 6.8 lb-in of torque drawing 9.81 amps of current.
Groschopp 04106 specsheet
The document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency ratings, start/stall conditions, and torque-speed curve. Key details are the motor runs at 982 rpm producing 6.8 lb-in of torque from a 12V power source. It has a continuous duty cycle and efficiency of 69.7% for both the motor and overall system.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. A graph shows torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 02006 specsheet
This document provides specifications for a 12V DC motor. The motor runs at 950 rpm with no gearbox. It has a rated speed of 934 rpm, torque of 4.8 lb-in, and current of 7.3 amps, producing 53 watts of power. The motor has a continuous duty cycle and efficiency of 61.9%. It requires 26.19 amps and 18.84 lb-in of torque for start/stall conditions. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Similar to Groschopp 01010 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Recently uploaded (20)
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Groschopp 01010 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: PM 6013 12 v DC 900 rpm 2 Poles None Product ID: 1010 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 915.0 rpm 1.5lb-in 2.83 amps 17 watts 0.0223 HP Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 51.9 % 51.9 % Start/Stall Conditions: Current: Torque: 7.31 amps 4.50 lb-in Constants: Ke: 7.82 v/krpm Kt: 0.66 lb-in/amp Torque (lb-in) Speed RPM Efficiency 150 0 0.0 0.5 300 1.0 450 1.5 600 2.0 750 2.5 900 3.0 1050 3.5 1200 4.0 1350 4.5 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com