Gravity
•Download as PPTX, PDF•
0 likes•128 views
The document discusses key concepts related to center of gravity including that it is the point where the weight of an object is considered to act, that balancing and stability relate to center of gravity, and that free fall and circular motion involve the effects of gravity and centrifugal/centripetal forces. Videos are provided to demonstrate these concepts visually.
Report
Share
Report
Share
Recommended
Seat position
Body orientation and positioning can affect force production and contribution to the pedals in cycling. Sitting upright allows leg weight to contribute to force on the pedals during the power stroke. Reclining positions require overcoming lower limb weight when pedaling, resulting in less force. Inverted seating is more effective for pulling during recovery than pushing against gravity during the power stroke. Recumbent bicycles are less effective than upright for hill climbing as pedaling upwards works against lower limb weight during the power stroke, requiring more energy.
Biomechanics 3
This document discusses biomechanics and angular motion. It defines important terminology like centre of gravity, base of support, line of gravity, angular distance, angular displacement, angular speed, angular velocity, and angular acceleration. It explains Newton's three laws of motion as they apply to angular motion. It also discusses angular momentum, moment of inertia, and how a figure skater can speed up or slow down a spin using the law of conservation of angular momentum. Learning outcomes include linking angular motion terms to linear equivalents, describing centre of gravity/mass, and explaining how angular motion relates to Newton's laws and conservation of momentum.
Kinesiology & biomechanics
This document discusses the center of gravity (COG) in the human body. It defines COG as the point where all the weight of the body is concentrated and balanced. The location of the COG depends on factors like age, sex, movements, and addition or subtraction of weight. It can be determined for the whole body or individual body segments using mathematical formulas or laboratory methods. Knowing the COG is important for tasks like gait training and designing prosthetics to ensure balanced movement and reduce pain or injury.
Center of Gravity
The document discusses the center of gravity, which is the point where a body's weight is concentrated and can be balanced without rotating. For regularly shaped bodies, the center of gravity is located at the geometric center. The center of gravity in the human body is affected by age, sex, and body build, and is generally located around the second sacral vertebra, 6 inches above the crotch and at 55% of a person's height. However, the location shifts with changes in position and load carrying.
Speed & Agility For Football Players
Football players always want to be faster and more agile - but how do you improve those skills when you're not naturally gifted with them? Center for Performance Medicine & Rehabilitation Clinic Director Dr. Michael Vishion outlines the best drills to help anyone improve speed & agility.
Unit 1 Basic Aerodynamics (part II)
Forces in Turns: When an aircraft banks in a turn, lift acts both inward toward the center of the turn and upward. For constant altitude turns, the vertical component of lift must equal weight.
Forces in Climbs: Raising the aircraft's nose increases its angle of attack and temporarily increases lift above weight. Thrust must exceed drag to maintain airspeed during climbs. More power is required at steeper climb angles.
Basic Propeller Principles: Several factors cause a left turning tendency in airplanes, including p-factor, gyroscopic effect, corkscrew slipstream, and torque reaction based on Newton's Third Law. Flight instructors remind pilots to "Right rudder,
Principles of biomechanics
The document discusses how batting techniques in cricket have evolved over time to incorporate more attacking shots and increased risk-taking by batsmen to score runs quickly. It examines some of the key biomechanical fundamentals of batting, such as the path of the bat and angular momentum, and how coaches can optimize player development by ensuring biomechanical principles are applied appropriately within a framework focused on fundamentals. The objective is for coaches to make the act of striking a cricket ball as simple as possible for players while still allowing expression of individual batting styles.
PEShare.co.uk Shared Resource
1. The document discusses projectile motion and factors that determine how far a projectile can travel, including components of motion, variations in vertical and horizontal motion, and impulse.
2. It also covers angular motion, key terms like angular velocity and momentum, and the principle of conservation of angular momentum. Performers aim to minimize external forces and changes in moment of inertia to maintain angular momentum.
3. An example is given of a dancer who initiates a spin jump with wide arms for maximum moment of inertia, then tucks to minimize it and maximize angular velocity to complete the spin.
Recommended
Seat position
Body orientation and positioning can affect force production and contribution to the pedals in cycling. Sitting upright allows leg weight to contribute to force on the pedals during the power stroke. Reclining positions require overcoming lower limb weight when pedaling, resulting in less force. Inverted seating is more effective for pulling during recovery than pushing against gravity during the power stroke. Recumbent bicycles are less effective than upright for hill climbing as pedaling upwards works against lower limb weight during the power stroke, requiring more energy.
Biomechanics 3
This document discusses biomechanics and angular motion. It defines important terminology like centre of gravity, base of support, line of gravity, angular distance, angular displacement, angular speed, angular velocity, and angular acceleration. It explains Newton's three laws of motion as they apply to angular motion. It also discusses angular momentum, moment of inertia, and how a figure skater can speed up or slow down a spin using the law of conservation of angular momentum. Learning outcomes include linking angular motion terms to linear equivalents, describing centre of gravity/mass, and explaining how angular motion relates to Newton's laws and conservation of momentum.
Kinesiology & biomechanics
This document discusses the center of gravity (COG) in the human body. It defines COG as the point where all the weight of the body is concentrated and balanced. The location of the COG depends on factors like age, sex, movements, and addition or subtraction of weight. It can be determined for the whole body or individual body segments using mathematical formulas or laboratory methods. Knowing the COG is important for tasks like gait training and designing prosthetics to ensure balanced movement and reduce pain or injury.
Center of Gravity
The document discusses the center of gravity, which is the point where a body's weight is concentrated and can be balanced without rotating. For regularly shaped bodies, the center of gravity is located at the geometric center. The center of gravity in the human body is affected by age, sex, and body build, and is generally located around the second sacral vertebra, 6 inches above the crotch and at 55% of a person's height. However, the location shifts with changes in position and load carrying.
Speed & Agility For Football Players
Football players always want to be faster and more agile - but how do you improve those skills when you're not naturally gifted with them? Center for Performance Medicine & Rehabilitation Clinic Director Dr. Michael Vishion outlines the best drills to help anyone improve speed & agility.
Unit 1 Basic Aerodynamics (part II)
Forces in Turns: When an aircraft banks in a turn, lift acts both inward toward the center of the turn and upward. For constant altitude turns, the vertical component of lift must equal weight.
Forces in Climbs: Raising the aircraft's nose increases its angle of attack and temporarily increases lift above weight. Thrust must exceed drag to maintain airspeed during climbs. More power is required at steeper climb angles.
Basic Propeller Principles: Several factors cause a left turning tendency in airplanes, including p-factor, gyroscopic effect, corkscrew slipstream, and torque reaction based on Newton's Third Law. Flight instructors remind pilots to "Right rudder,
Principles of biomechanics
The document discusses how batting techniques in cricket have evolved over time to incorporate more attacking shots and increased risk-taking by batsmen to score runs quickly. It examines some of the key biomechanical fundamentals of batting, such as the path of the bat and angular momentum, and how coaches can optimize player development by ensuring biomechanical principles are applied appropriately within a framework focused on fundamentals. The objective is for coaches to make the act of striking a cricket ball as simple as possible for players while still allowing expression of individual batting styles.
PEShare.co.uk Shared Resource
1. The document discusses projectile motion and factors that determine how far a projectile can travel, including components of motion, variations in vertical and horizontal motion, and impulse.
2. It also covers angular motion, key terms like angular velocity and momentum, and the principle of conservation of angular momentum. Performers aim to minimize external forces and changes in moment of inertia to maintain angular momentum.
3. An example is given of a dancer who initiates a spin jump with wide arms for maximum moment of inertia, then tucks to minimize it and maximize angular velocity to complete the spin.
Biomechanics 3 2014
This document discusses angular motion and key terminology used in biomechanics. It defines angular motion as when a body moves in a circle around an axis of rotation. It then defines several important terms including centre of gravity, moment of force, angular distance, angular displacement, angular speed, angular velocity, and angular acceleration. It explains Newton's three laws of motion as applied to angular motion. Finally, it discusses the law of conservation of angular momentum and how a figure skater can speed up or slow down spins by changing their moment of inertia without changing their total angular momentum.
Cga ifa 2015 13 the role of cga in crouch
This document discusses crouch gait and its treatment. It defines crouch gait as excessive knee flexion in midstance, often accompanied by ankle dorsiflexion. Factors that can predispose individuals to or exacerbate crouch gait are then discussed, including weakness, spasticity, contractures, balance issues, and weight gain. Surgical and nonsurgical treatment options aimed at addressing these underlying issues are outlined, such as calf lengthening procedures, femoral osteotomies, tendon transfers, and orthotic management. Case examples are presented showing improvements in gait biomechanics following various surgical interventions for severe crouch gait.
Stability
This document defines stability as the tendency of a body to return to its original state after being disturbed by restoring forces. It identifies four key factors that affect an object's stability: base of support, center of gravity, mass, and line of gravity. The document outlines the characteristics of stable, unstable, and neutral equilibrium and the types of objects that exhibit each state.
Biomech noteskoodle
This document provides information on biomechanics concepts for a physical education course. It covers biomechanics principles like balance and stability, Newton's laws of motion, force summation, projectile motion, and levers. Balance depends on factors like the center of gravity and base of support. Newton's laws address inertia, acceleration from forces, and equal reaction forces. Force summation examines combining body motions to apply force. Projectile motion analyzes factors affecting trajectories. Levers are used to increase resistance or velocity of motion using effort, resistance, and fulcrum points.
Women's basketball II
The document provides strength training exercises for women's basketball players to improve explosive power, vertical leap, and lower and upper body strength. It describes exercises like power cleans, front squats, dumbbell shoulder squats, sternum lateral pull downs, Jacob's jumps, and wide stance Romanian deadlifts. These exercises target muscles used in basketball skills like rebounding, shooting, and changing directions. Recommended sets, reps, and rest periods are also provided.
Analysis of the Long Jump Takeoff & Landing
Cameron T. Gary is a certified track and field coach specializing in jumps, sprints, hurdles, and relays. The document provides an overview of the biomechanics of jumping, including the importance of triple extension of the hips, knees, and ankles. It describes the difference between concentric jumping, which is strength-oriented, and counter-movement jumping, which utilizes the stretch-shortening cycle. It also discusses plyometrics and the plyometric effect, leg stiffness, center of mass, flight styles, and optimal landing techniques.
How to fix common golf problems
This document provides five drills to help improve a golfer's balance during their swing: 1) the one leg drill which strengthens the front leg, 2) the one hand drill which teaches proper weight shift, 3) lifting the front leg during the downswing to shift weight, 4) closing the eyes to feel weight distribution, and 5) hitting balls with the feet together to encourage a perfect turn. Maintaining balance is key to consistency, rhythm, and power in the golf swing. These drills target different phases of the swing to help ingrain better balance.
John Keogh, rowing coach: Late drive early recovery
John Keogh, head coach women for Rowing Canada Aviron gave this talk at the 2013 Joy of Sculling rowing coaching conference.
Gait_ Introduction, Analysis & Re-education Principles
A presentation aimed to educate First-year studeb=nts of undergraduate physiotherapy course. The presentation includes Introduction and Analysis of Gait Cycle, Walking Aids & Gait Re-education Principles using the aids.
Biomechanics and Sports
Chapter 10 Bio-Mechanics and Sports for Grade XII students of Physical Education of CBSE board. All new topics covered
Center 4
The center of gravity is the point where the sum of all forces acting on the body is zero. In humans, it is located anterior to the second sacral vertebra when standing. Its location can change during activities depending on body position. Factors like age, sex, position, and added/subtracted weight affect its location. The center of gravity can be calculated using segmental or total body methods. Stability depends on factors like the relationship between the center of gravity and base of support. There are three types of equilibrium - stable, unstable, and neutral.
Unit 1 Basic Aerodynamics ATPP 200
The document discusses the four forces of flight - lift, weight, thrust, and drag. It explains that lift is produced by the interaction of air moving over an airfoil shape according to Bernoulli's principle. The angle of attack and airspeed determine the amount of lift generated. For steady level flight, the opposing forces of lift and weight and of thrust and drag must balance. Induced drag is caused by lift and increases with higher angles of attack needed for slower flight. Exceeding the critical angle of attack causes a stall from airflow separation over the wing.
Kinematic gait analysis 1
The document discusses kinematics and gait analysis. It defines kinematics as the study of motion, including positions, angles, velocities and accelerations. Kinematic measurements provide a description of motion but not the causes. Gait is defined as forward body propulsion using coordinated lower limb movements. Six features that increase gait efficiency are described, such as pelvic tilt and rotation. Gait parameters including spatial measures like step length and temporal measures like stance duration are also outlined. Various methods for analyzing gait kinematics and kinetics are presented, including motion capture, electromyography, and force plates.
Biomechanics 1 (intro, levers, planes and axis) 2015
This document discusses key concepts in biomechanics including:
- There are two types of biomechanical analysis: qualitative and quantitative.
- Biomechanics is used to improve techniques, develop new techniques, design equipment, and prevent and rehabilitate injuries.
- Levers, forces, Newton's laws of motion, centers of gravity, bases of support, and lines of gravity are described in the context of human movement and sports. Examples are provided to illustrate how these concepts relate to specific sports techniques.
Stability
This document defines stability, equilibrium, and balance. It identifies six key factors that affect stability: center of gravity height, base of support, relation of line of gravity to base of support, properties of the supporting surface, segmentation principle, and subject's vision and emotional state. Each of these factors is then explained in more detail and examples are provided to illustrate how they impact stability.
Cga ifa 2015 8 why we walk kinetics
This document discusses kinetics in gait analysis, including ground reaction forces and joint moments. It begins by defining ground reaction forces as the forces exerted by the ground in response to forces exerted by the body. The document explains that ground reaction forces can be broken down into vertical and horizontal components and discusses the characteristic shapes seen in these components during gait cycles. It then defines joint moments as the tendency of forces to cause rotation at a joint and explains how moments are calculated from forces and lever arms. The document concludes by defining joint powers as the rate of energy generation or absorption at a joint and discusses the characteristic power profiles seen at the ankle, knee, and hip during gait.
More Biomechanical Terms
Inertia is an object's resistance to changes in motion. The heavier an object, the greater its inertia and the more force needed to move or stop it. Momentum is an object's mass multiplied by its velocity. Impulse is the force applied to an object over time. The greater the force or longer it is applied, the greater the impulse. Sports involve all three basic types of motion: linear, where all parts move the same distance in the same direction at the same time; angular, where the body rotates around an axis; and general, which is a combination.
Gait analysis in elderly population and rehabilitation
This document summarizes gait analysis in elderly populations. It discusses how factors like loss of muscle mass, decreased range of motion, and sensory decline affect locomotion in older adults. Common diagnoses that can lead to gait disorders are also outlined. Joint kinetics and kinematics are described for the ankle, knee, and hip with increasing age. Other considerations for elderly gait include lower push-off forces, increased fall risks, and strategies for obstacle avoidance. Both subjective and objective techniques for analyzing elderly gait are presented, such as the Timed Up and Go test and force platforms.
KettlebellSportLifts
The document describes the key movement patterns of the kettlebell snatch and long cycle sport lifts. It discusses 5 patterns for the snatch lift (swing, acceleration pull, hand insertion, lockout, and drop) and 7 patterns for the long cycle lift (clean, rack, first dip, bump, second dip, lockout, and drop). Each movement is explained in detail to properly perform the lifts, avoid injury, and improve kettlebell training.
Dynamics of machines-5
This document discusses governors and gyroscopes. It defines governors as automatic speed control mechanisms that use centrifugal or inertia forces to regulate fuel supply and maintain engine speed. Gyroscopes use conservation of angular momentum to maintain orientation. Their applications include navigation, stabilization of vehicles like helicopters, and maintaining direction in tunnel mining. The document also describes how gyroscopes produce gyroscopic couples that affect a ship's motion during turns, pitching, and rolling.
Nehemiah
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like depression and anxiety.
Esther ppt
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help boost feelings of calmness, happiness and focus.
More Related Content
What's hot
Biomechanics 3 2014
This document discusses angular motion and key terminology used in biomechanics. It defines angular motion as when a body moves in a circle around an axis of rotation. It then defines several important terms including centre of gravity, moment of force, angular distance, angular displacement, angular speed, angular velocity, and angular acceleration. It explains Newton's three laws of motion as applied to angular motion. Finally, it discusses the law of conservation of angular momentum and how a figure skater can speed up or slow down spins by changing their moment of inertia without changing their total angular momentum.
Cga ifa 2015 13 the role of cga in crouch
This document discusses crouch gait and its treatment. It defines crouch gait as excessive knee flexion in midstance, often accompanied by ankle dorsiflexion. Factors that can predispose individuals to or exacerbate crouch gait are then discussed, including weakness, spasticity, contractures, balance issues, and weight gain. Surgical and nonsurgical treatment options aimed at addressing these underlying issues are outlined, such as calf lengthening procedures, femoral osteotomies, tendon transfers, and orthotic management. Case examples are presented showing improvements in gait biomechanics following various surgical interventions for severe crouch gait.
Stability
This document defines stability as the tendency of a body to return to its original state after being disturbed by restoring forces. It identifies four key factors that affect an object's stability: base of support, center of gravity, mass, and line of gravity. The document outlines the characteristics of stable, unstable, and neutral equilibrium and the types of objects that exhibit each state.
Biomech noteskoodle
This document provides information on biomechanics concepts for a physical education course. It covers biomechanics principles like balance and stability, Newton's laws of motion, force summation, projectile motion, and levers. Balance depends on factors like the center of gravity and base of support. Newton's laws address inertia, acceleration from forces, and equal reaction forces. Force summation examines combining body motions to apply force. Projectile motion analyzes factors affecting trajectories. Levers are used to increase resistance or velocity of motion using effort, resistance, and fulcrum points.
Women's basketball II
The document provides strength training exercises for women's basketball players to improve explosive power, vertical leap, and lower and upper body strength. It describes exercises like power cleans, front squats, dumbbell shoulder squats, sternum lateral pull downs, Jacob's jumps, and wide stance Romanian deadlifts. These exercises target muscles used in basketball skills like rebounding, shooting, and changing directions. Recommended sets, reps, and rest periods are also provided.
Analysis of the Long Jump Takeoff & Landing
Cameron T. Gary is a certified track and field coach specializing in jumps, sprints, hurdles, and relays. The document provides an overview of the biomechanics of jumping, including the importance of triple extension of the hips, knees, and ankles. It describes the difference between concentric jumping, which is strength-oriented, and counter-movement jumping, which utilizes the stretch-shortening cycle. It also discusses plyometrics and the plyometric effect, leg stiffness, center of mass, flight styles, and optimal landing techniques.
How to fix common golf problems
This document provides five drills to help improve a golfer's balance during their swing: 1) the one leg drill which strengthens the front leg, 2) the one hand drill which teaches proper weight shift, 3) lifting the front leg during the downswing to shift weight, 4) closing the eyes to feel weight distribution, and 5) hitting balls with the feet together to encourage a perfect turn. Maintaining balance is key to consistency, rhythm, and power in the golf swing. These drills target different phases of the swing to help ingrain better balance.
John Keogh, rowing coach: Late drive early recovery
John Keogh, head coach women for Rowing Canada Aviron gave this talk at the 2013 Joy of Sculling rowing coaching conference.
Gait_ Introduction, Analysis & Re-education Principles
A presentation aimed to educate First-year studeb=nts of undergraduate physiotherapy course. The presentation includes Introduction and Analysis of Gait Cycle, Walking Aids & Gait Re-education Principles using the aids.
Biomechanics and Sports
Chapter 10 Bio-Mechanics and Sports for Grade XII students of Physical Education of CBSE board. All new topics covered
Center 4
The center of gravity is the point where the sum of all forces acting on the body is zero. In humans, it is located anterior to the second sacral vertebra when standing. Its location can change during activities depending on body position. Factors like age, sex, position, and added/subtracted weight affect its location. The center of gravity can be calculated using segmental or total body methods. Stability depends on factors like the relationship between the center of gravity and base of support. There are three types of equilibrium - stable, unstable, and neutral.
Unit 1 Basic Aerodynamics ATPP 200
The document discusses the four forces of flight - lift, weight, thrust, and drag. It explains that lift is produced by the interaction of air moving over an airfoil shape according to Bernoulli's principle. The angle of attack and airspeed determine the amount of lift generated. For steady level flight, the opposing forces of lift and weight and of thrust and drag must balance. Induced drag is caused by lift and increases with higher angles of attack needed for slower flight. Exceeding the critical angle of attack causes a stall from airflow separation over the wing.
Kinematic gait analysis 1
The document discusses kinematics and gait analysis. It defines kinematics as the study of motion, including positions, angles, velocities and accelerations. Kinematic measurements provide a description of motion but not the causes. Gait is defined as forward body propulsion using coordinated lower limb movements. Six features that increase gait efficiency are described, such as pelvic tilt and rotation. Gait parameters including spatial measures like step length and temporal measures like stance duration are also outlined. Various methods for analyzing gait kinematics and kinetics are presented, including motion capture, electromyography, and force plates.
Biomechanics 1 (intro, levers, planes and axis) 2015
This document discusses key concepts in biomechanics including:
- There are two types of biomechanical analysis: qualitative and quantitative.
- Biomechanics is used to improve techniques, develop new techniques, design equipment, and prevent and rehabilitate injuries.
- Levers, forces, Newton's laws of motion, centers of gravity, bases of support, and lines of gravity are described in the context of human movement and sports. Examples are provided to illustrate how these concepts relate to specific sports techniques.
Stability
This document defines stability, equilibrium, and balance. It identifies six key factors that affect stability: center of gravity height, base of support, relation of line of gravity to base of support, properties of the supporting surface, segmentation principle, and subject's vision and emotional state. Each of these factors is then explained in more detail and examples are provided to illustrate how they impact stability.
Cga ifa 2015 8 why we walk kinetics
This document discusses kinetics in gait analysis, including ground reaction forces and joint moments. It begins by defining ground reaction forces as the forces exerted by the ground in response to forces exerted by the body. The document explains that ground reaction forces can be broken down into vertical and horizontal components and discusses the characteristic shapes seen in these components during gait cycles. It then defines joint moments as the tendency of forces to cause rotation at a joint and explains how moments are calculated from forces and lever arms. The document concludes by defining joint powers as the rate of energy generation or absorption at a joint and discusses the characteristic power profiles seen at the ankle, knee, and hip during gait.
More Biomechanical Terms
Inertia is an object's resistance to changes in motion. The heavier an object, the greater its inertia and the more force needed to move or stop it. Momentum is an object's mass multiplied by its velocity. Impulse is the force applied to an object over time. The greater the force or longer it is applied, the greater the impulse. Sports involve all three basic types of motion: linear, where all parts move the same distance in the same direction at the same time; angular, where the body rotates around an axis; and general, which is a combination.
Gait analysis in elderly population and rehabilitation
This document summarizes gait analysis in elderly populations. It discusses how factors like loss of muscle mass, decreased range of motion, and sensory decline affect locomotion in older adults. Common diagnoses that can lead to gait disorders are also outlined. Joint kinetics and kinematics are described for the ankle, knee, and hip with increasing age. Other considerations for elderly gait include lower push-off forces, increased fall risks, and strategies for obstacle avoidance. Both subjective and objective techniques for analyzing elderly gait are presented, such as the Timed Up and Go test and force platforms.
KettlebellSportLifts
The document describes the key movement patterns of the kettlebell snatch and long cycle sport lifts. It discusses 5 patterns for the snatch lift (swing, acceleration pull, hand insertion, lockout, and drop) and 7 patterns for the long cycle lift (clean, rack, first dip, bump, second dip, lockout, and drop). Each movement is explained in detail to properly perform the lifts, avoid injury, and improve kettlebell training.
Dynamics of machines-5
This document discusses governors and gyroscopes. It defines governors as automatic speed control mechanisms that use centrifugal or inertia forces to regulate fuel supply and maintain engine speed. Gyroscopes use conservation of angular momentum to maintain orientation. Their applications include navigation, stabilization of vehicles like helicopters, and maintaining direction in tunnel mining. The document also describes how gyroscopes produce gyroscopic couples that affect a ship's motion during turns, pitching, and rolling.
What's hot (20)
John Keogh, rowing coach: Late drive early recovery
John Keogh, rowing coach: Late drive early recovery
Gait_ Introduction, Analysis & Re-education Principles
Gait_ Introduction, Analysis & Re-education Principles
Biomechanics 1 (intro, levers, planes and axis) 2015
Biomechanics 1 (intro, levers, planes and axis) 2015
Gait analysis in elderly population and rehabilitation
Gait analysis in elderly population and rehabilitation
More from ruthkezia
Nehemiah
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like depression and anxiety.
Esther ppt
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help boost feelings of calmness, happiness and focus.
Ezra ppt
The document discusses the results of a study on the impact of COVID-19 lockdowns on air pollution. Researchers found that lockdowns led to significant short-term reductions in nitrogen dioxide and fine particulate matter pollution globally as transportation and industrial activities declined substantially. However, the document notes that continued long-term progress on air quality will require sustainable changes rather than temporary reductions brought about by economic shutdowns.
Hardwork
The document contains several Bible verses that emphasize the importance of working hard and diligently. It encourages the reader to work wholeheartedly for the Lord, not to be idle but to work quietly and earn a living. Whoever works hard at their task will find success and provision, but those who are lazy or pursue worthless activities will lack and not prosper. Work was part of God's original command to Adam in the garden of Eden and is an important part of helping others.
Motion final ppt
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help alleviate symptoms of mental illness and boost overall mental well-being.
What is imside atom
This document provides information about atoms and their structure. It defines atoms as the smallest unit of matter and discusses their tiny size. Atoms are made up of subatomic particles, including protons, neutrons, and electrons. Early models of the atom are described, such as the plum pudding model, Rutherford model, and Bohr model. Key aspects of atomic structure like atomic number, mass, protons, neutrons, electrons, and valence electrons are defined and explained. Diagrams of hydrogen, oxygen, and sodium atoms are provided based on the Bohr model.
newtons laws of motion
The document discusses Newton's three laws of motion and provides examples to illustrate them. Newton's 1st law states that an object at rest stays at rest and an object in motion stays in motion unless acted upon by an unbalanced force. Examples show a body continuing to move after a bike stops, and dust remaining at rest on a carpet while the carpet moves. Newton's 2nd law concerns the relationship between force, mass, and acceleration. The 3rd law involves equal and opposite reaction forces between interacting objects.
Refraction
This document discusses refraction of light and total internal reflection. It defines refraction as the deviation of light's path when passing from one medium to another of different density. It explains that light slows down more in an optically denser medium. Total internal reflection occurs when light passes from an optically denser medium to a rarer one at an angle greater than the critical angle, causing the light to reflect back into the denser medium. Examples of total internal reflection applications include optical fibers and mirages.
Matter ppt
This document discusses the properties and states of matter. It defines matter as anything that occupies space and has mass. Matter is classified based on physical state (solid, liquid, gas) and chemical composition (pure substances and mixtures). The document describes activities that demonstrate particles of matter are very tiny, have space between them, are continuously moving, and attract each other. It then defines the three states of matter and their properties. The document explains how matter changes states through melting, boiling, sublimation, and evaporation. It discusses factors that affect evaporation and how evaporation causes cooling.
Atom and mole cules
This document discusses the naming conventions for elements based on scientists, places, planets, Latin and Greek names, gods, colors, and mythology. It also mentions the concepts of valency, which is an atom's combining capacity, symbols to represent atoms, and isotopes, which are atoms of the same element that have the same number of protons but different numbers of neutrons.
Heat
This document discusses various physical changes that can occur when heat is applied to materials:
- Melting occurs when a solid reaches its melting point and phases into a liquid. Boiling is when a liquid reaches its boiling point and forms gas bubbles.
- Evaporation changes a liquid to a gas without reaching the boiling point. Vapourization refers more broadly to both evaporation and boiling.
- Sublimation bypasses the liquid phase by going directly from solid to gas. The reverse is deposition.
- Condensation is the reverse of evaporation where a gas condenses to a liquid. Freezing is the reverse of melting where a liquid solidifies.
- Water absor
1matterinoursurroundings (1)
This document discusses the properties and states of matter. It defines matter as anything that occupies space and has mass. Matter is classified based on physical state (solid, liquid, gas) and chemical composition (pure substances and mixtures). The document describes activities that demonstrate particles of matter are very tiny, have space between them, are continuously moving, and attract each other. It outlines the key properties of solids, liquids, and gases. Changes in state from solid to liquid to gas are explained in detail, including melting, boiling, sublimation, and the effects of pressure on gases. The document concludes by discussing evaporation and how it causes cooling.
Motion final ppt
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Christmas programme ppt
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Electricity
This document discusses electrical circuits and how overloading appliances can cause a fuse to blow or circuit to overload. It also mentions birds sitting on power lines and Kirchhoff's laws, which relate to the conservation of charge in electrical circuits.
Refraction
Refraction is the deviation in the path of light when it passes from one medium to another of different density. When light travels from an optically rarer medium where it travels faster to an optically denser medium where it travels slower, it bends toward the normal line. Examples are light bending as it enters water from air or glass from water due to the changing speed of light between the different media.
Chemical bond ppt
Hybridisation is the process of cross-breeding between two different species or subspecies resulting in a hybrid offspring. It occurs in nature when two animals or plants from different species or subspecies mate and produce offspring. The hybrid offspring shows characteristics of both parent species or subspecies.
More from ruthkezia (20)
Recently uploaded
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...Abdul Wali Khan University Mardan,kP,Pakistan
hematic appreciation test is a psychological assessment tool used to measure an individual's appreciation and understanding of specific themes or topics. This test helps to evaluate an individual's ability to connect different ideas and concepts within a given theme, as well as their overall comprehension and interpretation skills. The results of the test can provide valuable insights into an individual's cognitive abilities, creativity, and critical thinking skillsUnlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
The pygmy halfbeak Dermogenys colletei, is known for its viviparous nature, this presents an intriguing case of relatively low fecundity, raising questions about potential compensatory reproductive strategies employed by this species. Our study delves into the examination of fecundity and the Gonadosomatic Index (GSI) in the Pygmy Halfbeak, D. colletei (Meisner, 2001), an intriguing viviparous fish indigenous to Sarawak, Borneo. We hypothesize that the Pygmy halfbeak, D. colletei, may exhibit unique reproductive adaptations to offset its low fecundity, thus enhancing its survival and fitness. To address this, we conducted a comprehensive study utilizing 28 mature female specimens of D. colletei, carefully measuring fecundity and GSI to shed light on the reproductive adaptations of this species. Our findings reveal that D. colletei indeed exhibits low fecundity, with a mean of 16.76 ± 2.01, and a mean GSI of 12.83 ± 1.27, providing crucial insights into the reproductive mechanisms at play in this species. These results underscore the existence of unique reproductive strategies in D. colletei, enabling its adaptation and persistence in Borneo's diverse aquatic ecosystems, and call for further ecological research to elucidate these mechanisms. This study lends to a better understanding of viviparous fish in Borneo and contributes to the broader field of aquatic ecology, enhancing our knowledge of species adaptations to unique ecological challenges.
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless ReproducibilityUniversity of Rennes, INSA Rennes, Inria/IRISA, CNRS
The ability to recreate computational results with minimal effort and actionable metrics provides a solid foundation for scientific research and software development. When people can replicate an analysis at the touch of a button using open-source software, open data, and methods to assess and compare proposals, it significantly eases verification of results, engagement with a diverse range of contributors, and progress. However, we have yet to fully achieve this; there are still many sociotechnical frictions.
Inspired by David Donoho's vision, this talk aims to revisit the three crucial pillars of frictionless reproducibility (data sharing, code sharing, and competitive challenges) with the perspective of deep software variability.
Our observation is that multiple layers — hardware, operating systems, third-party libraries, software versions, input data, compile-time options, and parameters — are subject to variability that exacerbates frictions but is also essential for achieving robust, generalizable results and fostering innovation. I will first review the literature, providing evidence of how the complex variability interactions across these layers affect qualitative and quantitative software properties, thereby complicating the reproduction and replication of scientific studies in various fields.
I will then present some software engineering and AI techniques that can support the strategic exploration of variability spaces. These include the use of abstractions and models (e.g., feature models), sampling strategies (e.g., uniform, random), cost-effective measurements (e.g., incremental build of software configurations), and dimensionality reduction methods (e.g., transfer learning, feature selection, software debloating).
I will finally argue that deep variability is both the problem and solution of frictionless reproducibility, calling the software science community to develop new methods and tools to manage variability and foster reproducibility in software systems.
Exposé invité Journées Nationales du GDR GPL 2024
The binding of cosmological structures by massless topological defects
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
Bob Reedy - Nitrate in Texas Groundwater.pdf
Presented at June 6-7 Texas Alliance of Groundwater Districts Business Meeting
原版制作(carleton毕业证书)卡尔顿大学毕业证硕士文凭原版一模一样
原版纸张【微信：741003700 】【(carleton毕业证书)卡尔顿大学毕业证】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Thornton ESPP slides UK WW Network 4_6_24.pdf
ESPP presentation to EU Waste Water Network, 4th June 2024 “EU policies driving nutrient removal and recycling
and the revised UWWTD (Urban Waste Water Treatment Directive)”
Randomised Optimisation Algorithms in DAPHNE
Slides from talk:
Aleš Zamuda: Randomised Optimisation Algorithms in DAPHNE .
Austrian-Slovenian HPC Meeting 2024 – ASHPC24, Seeblickhotel Grundlsee in Austria, 10–13 June 2024
https://ashpc.eu/
Phenomics assisted breeding in crop improvement
As the population is increasing and will reach about 9 billion upto 2050. Also due to climate change, it is difficult to meet the food requirement of such a large population. Facing the challenges presented by resource shortages, climate
change, and increasing global population, crop yield and quality need to be improved in a sustainable way over the coming decades. Genetic improvement by breeding is the best way to increase crop productivity. With the rapid progression of functional
genomics, an increasing number of crop genomes have been sequenced and dozens of genes influencing key agronomic traits have been identified. However, current genome sequence information has not been adequately exploited for understanding
the complex characteristics of multiple gene, owing to a lack of crop phenotypic data. Efficient, automatic, and accurate technologies and platforms that can capture phenotypic data that can
be linked to genomics information for crop improvement at all growth stages have become as important as genotyping. Thus,
high-throughput phenotyping has become the major bottleneck restricting crop breeding. Plant phenomics has been defined as the high-throughput, accurate acquisition and analysis of multi-dimensional phenotypes
during crop growing stages at the organism level, including the cell, tissue, organ, individual plant, plot, and field levels. With the rapid development of novel sensors, imaging technology,
and analysis methods, numerous infrastructure platforms have been developed for phenotyping.
Shallowest Oil Discovery of Turkiye.pptx
The Petroleum System of the Çukurova Field - the Shallowest Oil Discovery of Türkiye, Adana
Nucleophilic Addition of carbonyl compounds.pptx
Nucleophilic addition is the most important reaction of carbonyls. Not just aldehydes and ketones, but also carboxylic acid derivatives in general.
Carbonyls undergo addition reactions with a large range of nucleophiles.
Comparing the relative basicity of the nucleophile and the product is extremely helpful in determining how reversible the addition reaction is. Reactions with Grignards and hydrides are irreversible. Reactions with weak bases like halides and carboxylates generally don’t happen.
Electronic effects (inductive effects, electron donation) have a large impact on reactivity.
Large groups adjacent to the carbonyl will slow the rate of reaction.
Neutral nucleophiles can also add to carbonyls, although their additions are generally slower and more reversible. Acid catalysis is sometimes employed to increase the rate of addition.
What is greenhouse gasses and how many gasses are there to affect the Earth.
What are greenhouse gasses how they affect the earth and its environment what is the future of the environment and earth how the weather and the climate effects.
ESR spectroscopy in liquid food and beverages.pptx
With increasing population, people need to rely on packaged food stuffs. Packaging of food materials requires the preservation of food. There are various methods for the treatment of food to preserve them and irradiation treatment of food is one of them. It is the most common and the most harmless method for the food preservation as it does not alter the necessary micronutrients of food materials. Although irradiated food doesn’t cause any harm to the human health but still the quality assessment of food is required to provide consumers with necessary information about the food. ESR spectroscopy is the most sophisticated way to investigate the quality of the food and the free radicals induced during the processing of the food. ESR spin trapping technique is useful for the detection of highly unstable radicals in the food. The antioxidant capability of liquid food and beverages in mainly performed by spin trapping technique.
Recently uploaded (20)
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
mô tả các thí nghiệm về đánh giá tác động dòng khí hóa sau đốt
mô tả các thí nghiệm về đánh giá tác động dòng khí hóa sau đốt
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless Reproducibility
The binding of cosmological structures by massless topological defects
The binding of cosmological structures by massless topological defects
What is greenhouse gasses and how many gasses are there to affect the Earth.
What is greenhouse gasses and how many gasses are there to affect the Earth.
ESR spectroscopy in liquid food and beverages.pptx
ESR spectroscopy in liquid food and beverages.pptx
Gravity
- 2. CENTRE OF GRAVTY: • The imaginary point in a body at which the weight of the body appears to act is called centre of gravity • balancing point • Represented by COG,or CG
- 6. Video of centre of gravity
- 16. Stand with right shoulder and foot against the wall and raise your left foot. Stand with your heels against the floor and try to touch your toes.
- 22. Video of stability-centre of gravity exp
- 32. FREE FALL •It is any motion of a body where gravity is the only force acting on them
- 36. CIRCULAR MOTION • Motion of a body in circular path • Radius is constant • Direction changes • Velocity changes • Speed can be constant or not • Kinetic energy changes
- 39. Video of centripetal centrifugal force
- 57. THE END