GEAR PULLY - YOKE-Layout1
•
0 likes•215 views
This drawing shows a gear puller yoke with technical specifications. It was drawn by K. Thorpe on December 8, 2014 for Central Carolina Technical College's Engineering Graphics Technology program. The yoke has symmetrical features including rounded edges and holes, and notes specify fillet and round radii unless otherwise indicated.
Report
Share
Report
Share
Download to read offline
Recommended
GEAR PULLER - ASSEMBLY-Layout1
This drawing shows the assembly of a gear puller with 5 main parts: a yoke, arm, lead screw, clevis pin, and cotter pin. The drawing was created by K. Thorpe on 11/20/2014 for Central Carolina Technical College's Engineering Graphics Technology course. It includes the quantities needed for each of the 5 parts that make up the gear puller assembly.
GEAR PULLY - LEAD SCREW-Layout1
This technical drawing shows a gear puller with lead screw details. It includes dimensions for the gear puller components and lead screw, a scale of 1:1, and was drawn by K. Thorpe on November 18, 2014. It also references a detail view A of the lead screw at a scale of 4:1 and provides file information for the technical drawing.
GEAR PULLER - COTTER PIN-Layout1
This drawing shows a gear puller tool used to remove cotter pins. It was drawn by K. Thorpe on November 20, 2014 at a scale of 8:1. The gear puller has several rounded features including the jaws that grip the gear, with dimensions provided in inches. It will be used to assist the removal of cotter pins from mechanical components.
GEAR PULLER - ARM-Layout1
This technical drawing shows dimensions for a gear puller arm with various radii, lengths, angles, and notes. Key specifications include lengths of 2.8750, 2.8400, and 1.1250 inches, an angle of 25 degrees, radii of 0.4060 and 0.0300 inches, and notes to fillet all edges but not both sides of a specific dimension. The drawing was created by K. Thorpe on November 19, 2014 for Central Carolina Technical College's engineering graphics technology course.
KING-Layout1
This drawing shows the dimensions of a 3D model of a king chess piece. It includes dimensions for the height, width, and thickness at various points on the piece. Angles and hole diameters are also specified. The drawing title is "King", it was drawn by K. Thorpe on an unspecified date, and will be 3D printed at a scale of 2:1 using CCTC files.
PLUG VALVE - PUG-Layout1
This technical drawing shows a plug valve design with dimensions. The plug valve features a cylindrical plug that fits inside a tapered valve body. Key dimensions include the plug diameter of 16mm, valve body diameters of 26.5mm and 38.5mm, and plug length of 30mm. The drawing was created by K. Thorpe for a class project at Central Carolina Technical College and checked for accuracy.
GEAR PULLY - CLEVIS PIN-Layout1
The drawing depicts a gear puller with clevis pin attachment. It shows the dimensions and specifications for the gear puller's clevis pin connection point, including diameters of 0.4380 and 0.3100 inches, a 0.0300 inch by 45 degree chamfer, and 0.0940 inch diameter pin hole. The drawing also lists the date of November 20, 2014, was drawn by K. Thorpe and checked by the engineering graphics technology department at Central Carolina Technical College.
Capstone ANGLE SLIDE-Layout1
This technical drawing shows the details of an angle slide, including its dimensions and tolerances. It was drawn by K. Thorpe for a class at Central Carolina Technical College. The angle slide has various sized slots and holes, with most features rounded or filleted to a radius of 0.125 inches except where noted otherwise.
Recommended
GEAR PULLER - ASSEMBLY-Layout1
This drawing shows the assembly of a gear puller with 5 main parts: a yoke, arm, lead screw, clevis pin, and cotter pin. The drawing was created by K. Thorpe on 11/20/2014 for Central Carolina Technical College's Engineering Graphics Technology course. It includes the quantities needed for each of the 5 parts that make up the gear puller assembly.
GEAR PULLY - LEAD SCREW-Layout1
This technical drawing shows a gear puller with lead screw details. It includes dimensions for the gear puller components and lead screw, a scale of 1:1, and was drawn by K. Thorpe on November 18, 2014. It also references a detail view A of the lead screw at a scale of 4:1 and provides file information for the technical drawing.
GEAR PULLER - COTTER PIN-Layout1
This drawing shows a gear puller tool used to remove cotter pins. It was drawn by K. Thorpe on November 20, 2014 at a scale of 8:1. The gear puller has several rounded features including the jaws that grip the gear, with dimensions provided in inches. It will be used to assist the removal of cotter pins from mechanical components.
GEAR PULLER - ARM-Layout1
This technical drawing shows dimensions for a gear puller arm with various radii, lengths, angles, and notes. Key specifications include lengths of 2.8750, 2.8400, and 1.1250 inches, an angle of 25 degrees, radii of 0.4060 and 0.0300 inches, and notes to fillet all edges but not both sides of a specific dimension. The drawing was created by K. Thorpe on November 19, 2014 for Central Carolina Technical College's engineering graphics technology course.
KING-Layout1
This drawing shows the dimensions of a 3D model of a king chess piece. It includes dimensions for the height, width, and thickness at various points on the piece. Angles and hole diameters are also specified. The drawing title is "King", it was drawn by K. Thorpe on an unspecified date, and will be 3D printed at a scale of 2:1 using CCTC files.
PLUG VALVE - PUG-Layout1
This technical drawing shows a plug valve design with dimensions. The plug valve features a cylindrical plug that fits inside a tapered valve body. Key dimensions include the plug diameter of 16mm, valve body diameters of 26.5mm and 38.5mm, and plug length of 30mm. The drawing was created by K. Thorpe for a class project at Central Carolina Technical College and checked for accuracy.
GEAR PULLY - CLEVIS PIN-Layout1
The drawing depicts a gear puller with clevis pin attachment. It shows the dimensions and specifications for the gear puller's clevis pin connection point, including diameters of 0.4380 and 0.3100 inches, a 0.0300 inch by 45 degree chamfer, and 0.0940 inch diameter pin hole. The drawing also lists the date of November 20, 2014, was drawn by K. Thorpe and checked by the engineering graphics technology department at Central Carolina Technical College.
Capstone ANGLE SLIDE-Layout1
This technical drawing shows the details of an angle slide, including its dimensions and tolerances. It was drawn by K. Thorpe for a class at Central Carolina Technical College. The angle slide has various sized slots and holes, with most features rounded or filleted to a radius of 0.125 inches except where noted otherwise.
knight-Layout1
This technical drawing depicts a knight figure with labeled dimensions for its major axis of 13 units, minor axis of 10 units, and an orientation angle of 90 degrees between the two axes. The drawing also contains title blocks identifying the author, date, scale, file information and technical college program.
PLUG VALVE - HOUSING-Layout1
This drawing shows the housing component of a plug valve. It includes dimensions for the outer diameter, holes, and ribs. The housing has an outer diameter of 88mm and contains three evenly spaced ribs with a radius of 2mm on the interior. Smaller holes of varying diameters are placed throughout for connections. The title, scale, and other identifying information are present to specify the part and conform to engineering drawing standards.
PLUG VALVE - ASSEMBLEY-Layout1
This drawing document provides assembly details for a plug valve. It was drawn by K. Thorpe on December 1, 2014 at a metric scale for Central Carolina Technical College's Engineering Graphics Technology program. The drawing is numbered 1 of 6.
Board-Layout1
This drawing shows the dimensions of a board with a rectangular shape. The board is 111 centimeters long and 29.25 centimeters wide. It was drawn by K. Thorpe on September 23, 2014 at a metric scale for Central Carolina Technical College's Engineering Graphics Technology program.
QWEEN-Layout1
This technical drawing shows the dimensions of a 3D model of a queen chess piece. It includes dimensions for the height, width, angles, and diameters of circular cutouts. The drawing title is "Queen" and it was drawn by K. Thorpe on September 29, 2014 for a class project at Central Carolina Technical College.
TROLLEY - ASSEMBLY-Layout1
This drawing document provides assembly details for a trolley. It was drawn by K. Thorpe on December 1, 2014 at an unspecified scale for Central Carolina Technical College's Engineering Graphics Technology program. The drawing is numbered 1 of 8.
C-Clamp Assembly
This parts list contains 8 items needed to assemble a C-clamp. The items include a bottom ring, C body, pin head, ring, shaft, and T handle. Quantities and part numbers are provided for each item. A drawing shows the C-clamp assembly with labeled dimensions.
any angle clamp plug-Layout1
This technical drawing shows dimensions and specifications for a clamp plug for an any angle tool vice. It includes dimensions for various angles and diameters of the plug. The drawing also lists the date it was created, the scale, the title, associated CAD file, and the school and program where it was created.
TROLLEY - SNAPS-Layout1
This technical drawing shows the dimensions for a trolley axle and wheel assembly with two snap rings to hold the axle in place and four snap rings for the wheels. It was drawn by K. Thorpe on November 5, 2014 for a class project at Central Carolina Technical College.
Saudi Aramco Inspection Procedure (SAIP)
This document is a proposal from Dirham Mujahid Al-Salah Est. for general contracting, building, road construction, mechanical, electrical maintenance and operation works. It was prepared for the Master Gas Pipeline Phase I Projects Division of the Ministry of Energy, Industry and Mineral Resources in Riyadh, Saudi Arabia, under contract number S6il0032833 with C.A.T. International Co. LTD. The proposal includes the contractor's contact information and credentials.
SEPTIEMBRE 2016
This document is a pilot's flight log from September 1-30, 2016. It lists 16 separate flights taken on various aircraft, including several Airbus A319 and A320 models. For each flight it provides details like the date, aircraft type, route, total flight time, landings, and category of flight. The log totals 58.38 hours for the period covered, and certifies the entries are true.
Safety & Loss Prevention Programs
This document is a proposal from Dirham Mujahid Al-Salah Est. for general contracting, mechanical, electrical, and maintenance work. It includes the company's contact information, license number, and addresses. It also references a specific contract number for a pipeline project of the Master Gas Pipeline Phase 1 Projects Division in Riyadh, Saudi Arabia.
Saudi Aramco Inspection Checklist (SAIC)
Dirham Mujahid Al-Salah Est. is a general contracting company based in Saudi Arabia that provides services including general building construction, road construction, mechanical, electrical maintenance and operation works. The document appears to be a Saudi Arabian inspection checklist for a gas pipeline project prepared by Dirham Mujahid Al-Salah Est. in April 2016 for their Projects Division in Riyadh.
Diesel Electrical Locomotive--Passager & Freight Transport
Freight transport on main line,
AC-DC electric transmission & Single Phase AC
Engine rate power 1250 kw ~ 7200 kw;
Engine type: 16v240ZJD / 12V240ZJG / CAT3516DITA / CAT3512B / 16RK215T / 16V265H
Saudi Aramco Test Report (SATR)
This document is from Dirham Mujahid Al-Salah Est., a general contracting company based in Dammam, Saudi Arabia. It provides their contact information, including their commercial registration number and address. It also references two projects they are involved in - the East/West Pipeline Project for the Master Gas Pipeline Phase 1 Projects Division in Riyadh, with contract number 6500032833, and construction work for the Saudi Aramco Test Refinery.
Manhouler scania p380
This document appears to be a technical drawing or blueprint for a bus way manhole. It includes dimensions and measurements for various parts of the manhole design. Specifically, it lists dimensions such as 2500mm, 1940mm, 750mm repeated multiple times, and 1462mm. It also includes labels for items like quantity, manufacturing, part name, and scale.
Desenho redutor
The parts list document contains descriptions and quantities of parts needed to build a reducer including a carcass, two axles, two gears for assembly, two lateral covers, one superior cover, and screws. Drawings are provided on two sheets showing details of the reducer parts and their dimensions.
Grid map
This document contains a grid map with coordinates ranging from 530000 to 646000. It includes a legend with symbols for an 8km radius circle, 1x1km grid, waterbody, airport runway, roadway, railway, and index maps for Biman Bandar and Rajuk Dhaka. The grid map is part of an appendix for the Civil Aviation Authority of Bangladesh and is labeled Drawing No. with revision details.
1 MW solar Power plant project Scheduling and Tracking
In this PPT i have discussed about WBS, Gantt Chart, CPM Techniques and crashing of an 1 MW solar power plant project.
Cl1
This document appears to be a performance test record for an air handling unit or similar HVAC equipment. It includes sections for design parameters, test performance data, fan data, drive data, motor data, and a commissioning checklist. The document also notes that the unit was located at IIT Hyderabad for their campus development project but was not approved.
Examiner c21 knows you'll be watching
- Century 21 commissioned a survey to better understand viewers of their Super Bowl commercial after seeing success from their debut ad last year.
- The survey found most people (84%) will watch the game at home for comfort over sports bars, and will do so in pajamas while snacking on salty foods like chips.
- While men may watch more for the game, many women (63%) attend Super Bowl parties more for the social aspect and are very receptive to commercials, even if not watching the game closely.
More Related Content
What's hot
knight-Layout1
This technical drawing depicts a knight figure with labeled dimensions for its major axis of 13 units, minor axis of 10 units, and an orientation angle of 90 degrees between the two axes. The drawing also contains title blocks identifying the author, date, scale, file information and technical college program.
PLUG VALVE - HOUSING-Layout1
This drawing shows the housing component of a plug valve. It includes dimensions for the outer diameter, holes, and ribs. The housing has an outer diameter of 88mm and contains three evenly spaced ribs with a radius of 2mm on the interior. Smaller holes of varying diameters are placed throughout for connections. The title, scale, and other identifying information are present to specify the part and conform to engineering drawing standards.
PLUG VALVE - ASSEMBLEY-Layout1
This drawing document provides assembly details for a plug valve. It was drawn by K. Thorpe on December 1, 2014 at a metric scale for Central Carolina Technical College's Engineering Graphics Technology program. The drawing is numbered 1 of 6.
Board-Layout1
This drawing shows the dimensions of a board with a rectangular shape. The board is 111 centimeters long and 29.25 centimeters wide. It was drawn by K. Thorpe on September 23, 2014 at a metric scale for Central Carolina Technical College's Engineering Graphics Technology program.
QWEEN-Layout1
This technical drawing shows the dimensions of a 3D model of a queen chess piece. It includes dimensions for the height, width, angles, and diameters of circular cutouts. The drawing title is "Queen" and it was drawn by K. Thorpe on September 29, 2014 for a class project at Central Carolina Technical College.
TROLLEY - ASSEMBLY-Layout1
This drawing document provides assembly details for a trolley. It was drawn by K. Thorpe on December 1, 2014 at an unspecified scale for Central Carolina Technical College's Engineering Graphics Technology program. The drawing is numbered 1 of 8.
C-Clamp Assembly
This parts list contains 8 items needed to assemble a C-clamp. The items include a bottom ring, C body, pin head, ring, shaft, and T handle. Quantities and part numbers are provided for each item. A drawing shows the C-clamp assembly with labeled dimensions.
any angle clamp plug-Layout1
This technical drawing shows dimensions and specifications for a clamp plug for an any angle tool vice. It includes dimensions for various angles and diameters of the plug. The drawing also lists the date it was created, the scale, the title, associated CAD file, and the school and program where it was created.
TROLLEY - SNAPS-Layout1
This technical drawing shows the dimensions for a trolley axle and wheel assembly with two snap rings to hold the axle in place and four snap rings for the wheels. It was drawn by K. Thorpe on November 5, 2014 for a class project at Central Carolina Technical College.
Saudi Aramco Inspection Procedure (SAIP)
This document is a proposal from Dirham Mujahid Al-Salah Est. for general contracting, building, road construction, mechanical, electrical maintenance and operation works. It was prepared for the Master Gas Pipeline Phase I Projects Division of the Ministry of Energy, Industry and Mineral Resources in Riyadh, Saudi Arabia, under contract number S6il0032833 with C.A.T. International Co. LTD. The proposal includes the contractor's contact information and credentials.
SEPTIEMBRE 2016
This document is a pilot's flight log from September 1-30, 2016. It lists 16 separate flights taken on various aircraft, including several Airbus A319 and A320 models. For each flight it provides details like the date, aircraft type, route, total flight time, landings, and category of flight. The log totals 58.38 hours for the period covered, and certifies the entries are true.
Safety & Loss Prevention Programs
This document is a proposal from Dirham Mujahid Al-Salah Est. for general contracting, mechanical, electrical, and maintenance work. It includes the company's contact information, license number, and addresses. It also references a specific contract number for a pipeline project of the Master Gas Pipeline Phase 1 Projects Division in Riyadh, Saudi Arabia.
Saudi Aramco Inspection Checklist (SAIC)
Dirham Mujahid Al-Salah Est. is a general contracting company based in Saudi Arabia that provides services including general building construction, road construction, mechanical, electrical maintenance and operation works. The document appears to be a Saudi Arabian inspection checklist for a gas pipeline project prepared by Dirham Mujahid Al-Salah Est. in April 2016 for their Projects Division in Riyadh.
Diesel Electrical Locomotive--Passager & Freight Transport
Freight transport on main line,
AC-DC electric transmission & Single Phase AC
Engine rate power 1250 kw ~ 7200 kw;
Engine type: 16v240ZJD / 12V240ZJG / CAT3516DITA / CAT3512B / 16RK215T / 16V265H
Saudi Aramco Test Report (SATR)
This document is from Dirham Mujahid Al-Salah Est., a general contracting company based in Dammam, Saudi Arabia. It provides their contact information, including their commercial registration number and address. It also references two projects they are involved in - the East/West Pipeline Project for the Master Gas Pipeline Phase 1 Projects Division in Riyadh, with contract number 6500032833, and construction work for the Saudi Aramco Test Refinery.
Manhouler scania p380
This document appears to be a technical drawing or blueprint for a bus way manhole. It includes dimensions and measurements for various parts of the manhole design. Specifically, it lists dimensions such as 2500mm, 1940mm, 750mm repeated multiple times, and 1462mm. It also includes labels for items like quantity, manufacturing, part name, and scale.
Desenho redutor
The parts list document contains descriptions and quantities of parts needed to build a reducer including a carcass, two axles, two gears for assembly, two lateral covers, one superior cover, and screws. Drawings are provided on two sheets showing details of the reducer parts and their dimensions.
Grid map
This document contains a grid map with coordinates ranging from 530000 to 646000. It includes a legend with symbols for an 8km radius circle, 1x1km grid, waterbody, airport runway, roadway, railway, and index maps for Biman Bandar and Rajuk Dhaka. The grid map is part of an appendix for the Civil Aviation Authority of Bangladesh and is labeled Drawing No. with revision details.
1 MW solar Power plant project Scheduling and Tracking
In this PPT i have discussed about WBS, Gantt Chart, CPM Techniques and crashing of an 1 MW solar power plant project.
Cl1
This document appears to be a performance test record for an air handling unit or similar HVAC equipment. It includes sections for design parameters, test performance data, fan data, drive data, motor data, and a commissioning checklist. The document also notes that the unit was located at IIT Hyderabad for their campus development project but was not approved.
What's hot (20)
Diesel Electrical Locomotive--Passager & Freight Transport
Diesel Electrical Locomotive--Passager & Freight Transport
1 MW solar Power plant project Scheduling and Tracking
1 MW solar Power plant project Scheduling and Tracking
Viewers also liked
Examiner c21 knows you'll be watching
- Century 21 commissioned a survey to better understand viewers of their Super Bowl commercial after seeing success from their debut ad last year.
- The survey found most people (84%) will watch the game at home for comfort over sports bars, and will do so in pajamas while snacking on salty foods like chips.
- While men may watch more for the game, many women (63%) attend Super Bowl parties more for the social aspect and are very receptive to commercials, even if not watching the game closely.
Feliz fin de semana
El documento agradece a alguien por impartir un curso de computación y dice que fue excelente recibir clases con esa persona.
Bibliographic format ISO 2709
This power point presentation gives an overview idea of basic features , structure and use of ISO 2709.Each of it's structural elements have been described with diagrams and the ultimate form of a ISO 2709 Bibliographic record has been illustrated with a picture.
ASM History since 1960
This document discusses the history of artisanal and small-scale mining (ASM) since 1960. It outlines several key periods: from 1983-1987 when ASM was marginalized; from 1973-1987 when ASM rose to prominence due to economic crises and gold/diamond price increases; from 1987-2002 when core priorities for ASM were consolidated, including contributions to development and adherence to social and environmental standards; and since 2003 when there has been a proliferation of ASM initiatives but also a lack of focus, as issues like conflict minerals have drawn attention away from core ASM concerns. The document also notes events like gold rushes in the 1970s-80s that increased ASM's profile and priorities established in
Sustainable Mining: The Dodd Frank Act Section 1502 On "Conflict Minerals"
Resource Consulting Services is a leading consultancy that specializes in extractive industries, natural resources, and supply chain management. They provide advisory services to help clients comply with regulations regarding conflict minerals. The Dodd-Frank Act Section 1502 requires companies to report whether their products contain conflict minerals from the Democratic Republic of Congo. These minerals, which include gold, tin, tantalum, and tungsten, have helped finance armed groups in eastern DRC. Companies must conduct supply chain due diligence to determine if their minerals are "conflict free". Resource Consulting Services advises clients on implementing the OECD Due Diligence Guidance to help achieve Dodd-Frank Act compliance.
Tema 3
El documento resume las leyes de la herencia genética establecidas por Mendel. Explica que los genes se transmiten de generación en generación y determinan los caracteres de un individuo. Mendel descubrió que los factores hereditarios (los alelos de un gen) se separan y recombinan independientemente durante la reproducción sexual, dando lugar a nuevas combinaciones genéticas. Esto forma la base de la genética mendeliana.
Viewers also liked (9)
Sustainable Mining: The Dodd Frank Act Section 1502 On "Conflict Minerals"
Sustainable Mining: The Dodd Frank Act Section 1502 On "Conflict Minerals"
More from Kristopher Thorpe
TROLLEY-Layout1
This technical drawing shows the side plate of a trolley, including dimensions and hole specifications. It was drawn by K. Thorpe on October 2, 2014 for Central Carolina Technical College's Engineering Graphics Technology program. The drawing is number 3 of 8 for the trolley project.
TROLLEY - WHEEL-Layout1
This drawing shows details of a trolley wheel, including dimensions and notes. It was drawn by K. Thorpe on October 30, 2014 for Central Carolina Technical College's Engineering Graphics Technology program. The drawing depicts the profile of a wheel with various radii, diameters, and other geometric specifications.
TROLLEY - SIDE PLATE-Layout1
This technical drawing shows the side plate component of a trolley system, including its dimensions and hole placement. It was drawn by K. Thorpe on December 8, 2014 for Central Carolina Technical College's Engineering Graphics Technology program. The side plate is approximately 8 inches long and 7 inches high with various holes and cutouts as indicated on the scale drawing.
TROLLEY - DEPARTURE BALL-Layout1
This drawing shows a departure ball bearing for a trolley with 8 evenly spaced balls. The drawing specifies the dimensions of the balls and outer raceway of the bearing which has 2 balls required and was drawn by K. Thorpe for a class project at Central Carolina Technical College.
TROLLEY - AXLE-Layout1
The drawing depicts an axle for a trolley with dimensions, including an overall length of 2.875 inches, diameter of 0.875 inches, and thickness of 0.1040 inches. It was drawn by K. Thorpe for Central Carolina Technical College's Engineering Graphics Technology course, and is drawing number 5 of 8 in the Trolley - Axle series.
any angle Eccentric-Layout1
This technical drawing shows dimensions for an eccentric any angle tool vice. Key dimensions include the diameter and thickness of various cylindrical and circular features ranging from .125 to 1.281 units. The drawing also lists the drafter, date, scale, title, CAD file information, and school where it was created.
any angle lower plate-Layout1
This technical drawing shows dimensions for a lower plate of an any angle tool vice. It includes labeled dimensions for holes, radii, angles, and features of the plate. The drawing title identifies it as the lower plate of an any angle tool vice, and it was drawn by C.J. Ingram for Central Carolina Technical College's Engineering Graphics Technology program.
any angle saddle-Layout1
This drawing shows dimensions for an angle tool vice saddle, including hole diameters, radii, lengths, and labeling. Key features include dimensions ranging from 0.125 to 6.5, holes labeled with diameters and depths, fillets and rounds of 0.125 radius, and notes specifying the date, scale, title, file path and number. The drawing was created by C.J. Ingram for Central Carolina Technical College's Engineering Graphics Technology program.
any angle tool holder-Layout1
This drawing shows a compound tool holder with various dimensions and features including holes, diameters, angles, chamfers, and notes. It was drawn by C.J. Ingram for Central Carolina Technical College's Engineering Graphics Technology program and provides the details to manufacture the tool holder.
any angle upper member-Layout1
This document contains technical drawings and specifications for an upper compound member including dimensions, tolerances, notes and labels such as the title, scale, part number, date, and initials of the designer and checker. Key specifications include an outside diameter of 1.75 inches, a radius of 1.999 inches, a length of 15.1 inches, angles of 40 and 15 degrees, and thread specifications.
any angle upper plate-Layout1
This technical drawing shows dimensions for an upper plate of an any angle tool vice. It includes labeled dimensions for holes, radii, angles, and features of the plate with sizes ranging from 0.063 to 3.5 inches. The drawing also lists the date, scale, title, CAD file information, drawing number, and notes that it was drawn and checked by students at Central Carolina Technical College.
PLUG VALVE - HANDLE-Layout1
This technical drawing shows details of a plug valve handle. It includes dimensions for the main cylindrical handle that is 80mm long with diameters of 11mm and 9mm at each end connected by tapers with radii of 2.5mm and 1mm. Four holes with a diameter of 6mm are located around the middle section.
PLUG VALVE - CAP-Layout1
This drawing depicts a plug valve cap with dimensions and tolerances. It was drawn by K. Thorpe on an unspecified date for Central Carolina Technical College's Engineering Graphics Technology program. The drawing number is 2 of 6 and shows the cap has an outer diameter of 110mm, four radius 4 corners, and two M42 threads that are 2mm deep.
PLUG VLAVE - PIN-Layout1
This drawing shows a plug valve pin with dimensions and tolerances. The pin is approximately 27mm long and tapers from a diameter of 17mm on one end to 27mm on the other. Small chamfers are placed at various edges. The drawing title is "PLUG VALVE - PIN" and it was drawn by K. Thorpe for Central Carolina Technical College Engineering Graphics Technology.
bishop-Layout1
This document contains measurements and technical drawings of a bishop piece including dimensions for its major and minor axes, various radii and angles, and notes indicating it was drawn by K. Thorpe on a particular date and saved file location. The drawing number, title, and school are also included.
PAWN A-Layout1
This technical drawing document contains dimensions and specifications for a part called "Pawn A". It includes measurements in millimeters for the part's features and geometry. The document also lists the date it was drawn, the scale, the drawing title, file information, and notes that it was drawn and checked by students at Central Carolina Technical College for their Engineering Graphics Technology program.
More from Kristopher Thorpe (16)
GEAR PULLY - YOKE-Layout1
- 1. DRAWN BY: K.THORPE DATE: SCALE: 1:1 DRAWING TITLE: GEAR PULLER - YOKE CCTC FILESRAPIDPHOTOGEAR PULLER- YOKE.DWG 12/8/2014 DRAWING NO: 2 OF 6 SIZE: A CENTRAL CAROLINA TECHNICAL COLLEGE ENGINEERING GRAPHICS TECHNOLOGY CHECKED BY: GRADE: 0.8750 TYP. 0.2475 TYP. 0.3800 TYP. 120° TYP. 0.5000 TYP. 1.4375 TYP. .4375 - 20 UNC - 2B THRU 6X R0.0300 3X R0.38 R0.4375 TYP. Ø0.3125 TYP. NOTE: ALL FILLETS AND ROUNDS R.06 UNLESS OTHERWISE NOTED