any angle upper plate-Layout1
•
0 likes•96 views
This technical drawing shows dimensions for an upper plate of an any angle tool vice. It includes labeled dimensions for holes, radii, angles, and features of the plate with sizes ranging from 0.063 to 3.5 inches. The drawing also lists the date, scale, title, CAD file information, drawing number, and notes that it was drawn and checked by students at Central Carolina Technical College.
Report
Share
Report
Share
Download to read offline
Recommended
any angle lower plate-Layout1
This technical drawing shows dimensions for a lower plate of an any angle tool vice. It includes labeled dimensions for holes, radii, angles, and features of the plate. The drawing title identifies it as the lower plate of an any angle tool vice, and it was drawn by C.J. Ingram for Central Carolina Technical College's Engineering Graphics Technology program.
any angle saddle-Layout1
This drawing shows dimensions for an angle tool vice saddle, including hole diameters, radii, lengths, and labeling. Key features include dimensions ranging from 0.125 to 6.5, holes labeled with diameters and depths, fillets and rounds of 0.125 radius, and notes specifying the date, scale, title, file path and number. The drawing was created by C.J. Ingram for Central Carolina Technical College's Engineering Graphics Technology program.
knight-Layout1
This technical drawing depicts a knight figure with labeled dimensions for its major axis of 13 units, minor axis of 10 units, and an orientation angle of 90 degrees between the two axes. The drawing also contains title blocks identifying the author, date, scale, file information and technical college program.
KING-Layout1
This drawing shows the dimensions of a 3D model of a king chess piece. It includes dimensions for the height, width, and thickness at various points on the piece. Angles and hole diameters are also specified. The drawing title is "King", it was drawn by K. Thorpe on an unspecified date, and will be 3D printed at a scale of 2:1 using CCTC files.
3D-GCT-2014-1376-02 REV 0
This document contains engineering drawings for a trailer, including:
- Front and plan views of both an unloaded and loaded trailer, with dimensions.
- Detailed drawings of the trailer frame, with part numbers and dimensions.
- Notes referring to other drawings for hydraulic power pack details.
4. base shear
This document provides steps to calculate seismic input parameters for structural design. It includes determining the seismic coefficient and factors based on occupancy category, soil profile, seismic zone and other site-specific parameters. It then calculates the fundamental period, design base shear, and upper and lower limits on the base shear. The governing design base shear is reported as the output of these calculations.
GEAR PULLER - ARM-Layout1
This technical drawing shows dimensions for a gear puller arm with various radii, lengths, angles, and notes. Key specifications include lengths of 2.8750, 2.8400, and 1.1250 inches, an angle of 25 degrees, radii of 0.4060 and 0.0300 inches, and notes to fillet all edges but not both sides of a specific dimension. The drawing was created by K. Thorpe on November 19, 2014 for Central Carolina Technical College's engineering graphics technology course.
Belt Feeder Chute
1. This drawing shows views and dimensions of a belt feeder chute for a platinum plant.
2. The drawing was prepared using Tekla Structures software and supplied by Cadex SA, a Tekla reseller based in South Africa.
3. Views include side view, plan on flange, 3D view, and view 04 and 02 with labeled dimensions.
Recommended
any angle lower plate-Layout1
This technical drawing shows dimensions for a lower plate of an any angle tool vice. It includes labeled dimensions for holes, radii, angles, and features of the plate. The drawing title identifies it as the lower plate of an any angle tool vice, and it was drawn by C.J. Ingram for Central Carolina Technical College's Engineering Graphics Technology program.
any angle saddle-Layout1
This drawing shows dimensions for an angle tool vice saddle, including hole diameters, radii, lengths, and labeling. Key features include dimensions ranging from 0.125 to 6.5, holes labeled with diameters and depths, fillets and rounds of 0.125 radius, and notes specifying the date, scale, title, file path and number. The drawing was created by C.J. Ingram for Central Carolina Technical College's Engineering Graphics Technology program.
knight-Layout1
This technical drawing depicts a knight figure with labeled dimensions for its major axis of 13 units, minor axis of 10 units, and an orientation angle of 90 degrees between the two axes. The drawing also contains title blocks identifying the author, date, scale, file information and technical college program.
KING-Layout1
This drawing shows the dimensions of a 3D model of a king chess piece. It includes dimensions for the height, width, and thickness at various points on the piece. Angles and hole diameters are also specified. The drawing title is "King", it was drawn by K. Thorpe on an unspecified date, and will be 3D printed at a scale of 2:1 using CCTC files.
3D-GCT-2014-1376-02 REV 0
This document contains engineering drawings for a trailer, including:
- Front and plan views of both an unloaded and loaded trailer, with dimensions.
- Detailed drawings of the trailer frame, with part numbers and dimensions.
- Notes referring to other drawings for hydraulic power pack details.
4. base shear
This document provides steps to calculate seismic input parameters for structural design. It includes determining the seismic coefficient and factors based on occupancy category, soil profile, seismic zone and other site-specific parameters. It then calculates the fundamental period, design base shear, and upper and lower limits on the base shear. The governing design base shear is reported as the output of these calculations.
GEAR PULLER - ARM-Layout1
This technical drawing shows dimensions for a gear puller arm with various radii, lengths, angles, and notes. Key specifications include lengths of 2.8750, 2.8400, and 1.1250 inches, an angle of 25 degrees, radii of 0.4060 and 0.0300 inches, and notes to fillet all edges but not both sides of a specific dimension. The drawing was created by K. Thorpe on November 19, 2014 for Central Carolina Technical College's engineering graphics technology course.
Belt Feeder Chute
1. This drawing shows views and dimensions of a belt feeder chute for a platinum plant.
2. The drawing was prepared using Tekla Structures software and supplied by Cadex SA, a Tekla reseller based in South Africa.
3. Views include side view, plan on flange, 3D view, and view 04 and 02 with labeled dimensions.
any angle clamp plug-Layout1
This technical drawing shows dimensions and specifications for a clamp plug for an any angle tool vice. It includes dimensions for various angles and diameters of the plug. The drawing also lists the date it was created, the scale, the title, associated CAD file, and the school and program where it was created.
bishop-Layout1
This document contains measurements and technical drawings of a bishop piece including dimensions for its major and minor axes, various radii and angles, and notes indicating it was drawn by K. Thorpe on a particular date and saved file location. The drawing number, title, and school are also included.
Sample Draft for Manufacturing
This document contains an isometric view and sectional view of a mechanical part at a scale of 2:1, along with two detail views at a scale of 2:1. It also includes a bill of materials listing dimensions, tolerances, notes and references to an attached 3D file and designer for additional details.
GEAR PULLY - LEAD SCREW-Layout1
This technical drawing shows a gear puller with lead screw details. It includes dimensions for the gear puller components and lead screw, a scale of 1:1, and was drawn by K. Thorpe on November 18, 2014. It also references a detail view A of the lead screw at a scale of 4:1 and provides file information for the technical drawing.
TROLLEY - DEPARTURE BALL-Layout1
This drawing shows a departure ball bearing for a trolley with 8 evenly spaced balls. The drawing specifies the dimensions of the balls and outer raceway of the bearing which has 2 balls required and was drawn by K. Thorpe for a class project at Central Carolina Technical College.
J0017227-1
This document contains a summary of the key components of an enclosure assembly, including a brief bill of materials listing the main parts. It identifies seven main items that make up the assembly, providing the manufacturer and part number for each. The components include an explosion proof enclosure, plugs, fuse holder, power supply, transmitter mounting plate, speed switch/transmitter, and speed sensor.
GEAR PULLER - COTTER PIN-Layout1
This drawing shows a gear puller tool used to remove cotter pins. It was drawn by K. Thorpe on November 20, 2014 at a scale of 8:1. The gear puller has several rounded features including the jaws that grip the gear, with dimensions provided in inches. It will be used to assist the removal of cotter pins from mechanical components.
CMF 2019 Kimberly Goetz
The site plan shows areas for demolition, construction access, and relocation of two units. Unit 8 will relocate to Unit 36 and Unit 14 will relocate to Unit 24. The legend provides information on existing buildings such as Marshalls, Office Depot, and T.J. Maxx, as well as their square footages. Walmart is identified as occupying 121,097 square feet and is planned for expansion of approximately 63,653 additional square feet.
EE201_Assignment2
This document contains instructions for 3 MATLAB programming assignments. Assignment 1 asks students to write a program that prompts users to input the radius and height of a cone and calculates the surface area and volume. Assignment 2 asks students to write a program that prompts for the stretching distance of a spring and calculates the potential energy. Assignment 3 asks students to write a program that prompts for the energy released in an earthquake and calculates the magnitude. Sample solutions are provided for each assignment.
09-Rooney-Elevations
This document contains elevation drawings for a residential remodel project, including the north, east, west, and south elevations of the property. Each elevation includes labels and callouts for notable features, along with a legend identifying the labels.
as400 built in function- %YEARS
%YEARS converts a number into a duration that can be added or subtracted to a date or timestamp value to change its year. It is used in the example to add 2 years to a date, setting it to 2013-01-12, and subtract 2 years from a timestamp, setting it to 2011-02-01-01.28.10.07 1000.
Tubular Chair.PDF
This document provides a technical drawing of a tubular chair, including dimensions and notes. The drawing shows the chair frame is composed of bent tubing of exaggerated sizes for clarity. Notes indicate all bends have a 30mm radius and tube sizes are exaggerated for clarity. The document also provides the title "Tubular Chair", drawing number, scale, materials used, and designer/date.
T30-14 ....PDF
This document contains a technical drawing with dimensions and specifications for an entry roller guide. It includes views and details of the part with labels for materials, scales, and other annotations. The drawing number, title, date, and company name are provided in notes.
Exercise 1 networking
1. The supplemental problem solutions are presented in a table with information on events, activities, earliest start and finish times, and latest start and finish times.
2. A network diagram is to be completed showing the dependencies between activities. A bar chart schedule and calculations for float times are also to be included.
3. The project involves 10 activities related to building construction with a total estimated material cost of $88,450 and actual cost of $75,553.15.
707685-12
This document contains a parts list for a transformer assembly with 17 items. It lists the item description, part number, and quantity for each part including the cover assembly, tank assembly, bushing assembly, rods, seals, brackets, washers, nuts, bucholze pipe assembly, pockets, CT bushing assembly, flanges, drain valve assembly, blanks, lifting lugs, bolts, and bars. The document also includes dimensional references and tolerances, surface texture symbols, references, titles, and other identifying information for the assembly drawing.
Indi. Prog.2
This individual progress report summarizes the activities and expenses of Mr. Arnel M. Ortalla for the month of July on the Vehicle and Parking system project. It shows that he earned 100 in income from savings from his allowance and spent 85 on PC and printer rentals for presentations and reports. The total income for the month was 100 and total expenses were 85, resulting in a net income of 15.
Grid map
This document contains a grid map with coordinates ranging from 530000 to 646000. It includes a legend with symbols for an 8km radius circle, 1x1km grid, waterbody, airport runway, roadway, railway, and index maps for Biman Bandar and Rajuk Dhaka. The grid map is part of an appendix for the Civil Aviation Authority of Bangladesh and is labeled Drawing No. with revision details.
Fixture Slide Block-Layout1
This drawing shows the dimensions of a fixture slide block with labeled measurements for its various features. It was drawn by Sara N. Briggs on April 27, 2015 for a class project at Central Carolina Technical College for their Engineering Graphics Technology program.
Modul 6 tugasan visual penjanaan perjalanan
This document contains a table summarizing housing unit data including area, price, expenditures, and withdrawals by zone. It also contains calculations of the total, average, and equalized expenditures and withdrawals across all zones. Visualizations of the expenditures and withdrawals by zone are presented. The document concludes by thanking the reader.
RISK SHARING IN TRADITIONAL CONSTRUCTION CONTRACTS FOR BUILDING PROJECTS
A master thesis project designed, executed and presented by Ir. Dimitrios Kordas for the degree of MSc in Construction Management and Engineering at the University of Twente, the Netherlands.
Study details:
√ questionnaire-based survey study
√ 27 individual on-site risks assessed
√ 5 cost elemental categories
√ product-based cost model
√ Tools: MC method, AHP, Sensitivity diagrams
√ Sample: 22 building projects from the Greek Construction Industry
Under the supervision of:
Prof. Joop Halman (chairman)
Assoc. Prof. Saad Al-Jibouri (direct supervisor)
More Related Content
What's hot
any angle clamp plug-Layout1
This technical drawing shows dimensions and specifications for a clamp plug for an any angle tool vice. It includes dimensions for various angles and diameters of the plug. The drawing also lists the date it was created, the scale, the title, associated CAD file, and the school and program where it was created.
bishop-Layout1
This document contains measurements and technical drawings of a bishop piece including dimensions for its major and minor axes, various radii and angles, and notes indicating it was drawn by K. Thorpe on a particular date and saved file location. The drawing number, title, and school are also included.
Sample Draft for Manufacturing
This document contains an isometric view and sectional view of a mechanical part at a scale of 2:1, along with two detail views at a scale of 2:1. It also includes a bill of materials listing dimensions, tolerances, notes and references to an attached 3D file and designer for additional details.
GEAR PULLY - LEAD SCREW-Layout1
This technical drawing shows a gear puller with lead screw details. It includes dimensions for the gear puller components and lead screw, a scale of 1:1, and was drawn by K. Thorpe on November 18, 2014. It also references a detail view A of the lead screw at a scale of 4:1 and provides file information for the technical drawing.
TROLLEY - DEPARTURE BALL-Layout1
This drawing shows a departure ball bearing for a trolley with 8 evenly spaced balls. The drawing specifies the dimensions of the balls and outer raceway of the bearing which has 2 balls required and was drawn by K. Thorpe for a class project at Central Carolina Technical College.
J0017227-1
This document contains a summary of the key components of an enclosure assembly, including a brief bill of materials listing the main parts. It identifies seven main items that make up the assembly, providing the manufacturer and part number for each. The components include an explosion proof enclosure, plugs, fuse holder, power supply, transmitter mounting plate, speed switch/transmitter, and speed sensor.
GEAR PULLER - COTTER PIN-Layout1
This drawing shows a gear puller tool used to remove cotter pins. It was drawn by K. Thorpe on November 20, 2014 at a scale of 8:1. The gear puller has several rounded features including the jaws that grip the gear, with dimensions provided in inches. It will be used to assist the removal of cotter pins from mechanical components.
CMF 2019 Kimberly Goetz
The site plan shows areas for demolition, construction access, and relocation of two units. Unit 8 will relocate to Unit 36 and Unit 14 will relocate to Unit 24. The legend provides information on existing buildings such as Marshalls, Office Depot, and T.J. Maxx, as well as their square footages. Walmart is identified as occupying 121,097 square feet and is planned for expansion of approximately 63,653 additional square feet.
EE201_Assignment2
This document contains instructions for 3 MATLAB programming assignments. Assignment 1 asks students to write a program that prompts users to input the radius and height of a cone and calculates the surface area and volume. Assignment 2 asks students to write a program that prompts for the stretching distance of a spring and calculates the potential energy. Assignment 3 asks students to write a program that prompts for the energy released in an earthquake and calculates the magnitude. Sample solutions are provided for each assignment.
09-Rooney-Elevations
This document contains elevation drawings for a residential remodel project, including the north, east, west, and south elevations of the property. Each elevation includes labels and callouts for notable features, along with a legend identifying the labels.
as400 built in function- %YEARS
%YEARS converts a number into a duration that can be added or subtracted to a date or timestamp value to change its year. It is used in the example to add 2 years to a date, setting it to 2013-01-12, and subtract 2 years from a timestamp, setting it to 2011-02-01-01.28.10.07 1000.
Tubular Chair.PDF
This document provides a technical drawing of a tubular chair, including dimensions and notes. The drawing shows the chair frame is composed of bent tubing of exaggerated sizes for clarity. Notes indicate all bends have a 30mm radius and tube sizes are exaggerated for clarity. The document also provides the title "Tubular Chair", drawing number, scale, materials used, and designer/date.
T30-14 ....PDF
This document contains a technical drawing with dimensions and specifications for an entry roller guide. It includes views and details of the part with labels for materials, scales, and other annotations. The drawing number, title, date, and company name are provided in notes.
Exercise 1 networking
1. The supplemental problem solutions are presented in a table with information on events, activities, earliest start and finish times, and latest start and finish times.
2. A network diagram is to be completed showing the dependencies between activities. A bar chart schedule and calculations for float times are also to be included.
3. The project involves 10 activities related to building construction with a total estimated material cost of $88,450 and actual cost of $75,553.15.
707685-12
This document contains a parts list for a transformer assembly with 17 items. It lists the item description, part number, and quantity for each part including the cover assembly, tank assembly, bushing assembly, rods, seals, brackets, washers, nuts, bucholze pipe assembly, pockets, CT bushing assembly, flanges, drain valve assembly, blanks, lifting lugs, bolts, and bars. The document also includes dimensional references and tolerances, surface texture symbols, references, titles, and other identifying information for the assembly drawing.
Indi. Prog.2
This individual progress report summarizes the activities and expenses of Mr. Arnel M. Ortalla for the month of July on the Vehicle and Parking system project. It shows that he earned 100 in income from savings from his allowance and spent 85 on PC and printer rentals for presentations and reports. The total income for the month was 100 and total expenses were 85, resulting in a net income of 15.
Grid map
This document contains a grid map with coordinates ranging from 530000 to 646000. It includes a legend with symbols for an 8km radius circle, 1x1km grid, waterbody, airport runway, roadway, railway, and index maps for Biman Bandar and Rajuk Dhaka. The grid map is part of an appendix for the Civil Aviation Authority of Bangladesh and is labeled Drawing No. with revision details.
Fixture Slide Block-Layout1
This drawing shows the dimensions of a fixture slide block with labeled measurements for its various features. It was drawn by Sara N. Briggs on April 27, 2015 for a class project at Central Carolina Technical College for their Engineering Graphics Technology program.
Modul 6 tugasan visual penjanaan perjalanan
This document contains a table summarizing housing unit data including area, price, expenditures, and withdrawals by zone. It also contains calculations of the total, average, and equalized expenditures and withdrawals across all zones. Visualizations of the expenditures and withdrawals by zone are presented. The document concludes by thanking the reader.
RISK SHARING IN TRADITIONAL CONSTRUCTION CONTRACTS FOR BUILDING PROJECTS
A master thesis project designed, executed and presented by Ir. Dimitrios Kordas for the degree of MSc in Construction Management and Engineering at the University of Twente, the Netherlands.
Study details:
√ questionnaire-based survey study
√ 27 individual on-site risks assessed
√ 5 cost elemental categories
√ product-based cost model
√ Tools: MC method, AHP, Sensitivity diagrams
√ Sample: 22 building projects from the Greek Construction Industry
Under the supervision of:
Prof. Joop Halman (chairman)
Assoc. Prof. Saad Al-Jibouri (direct supervisor)
What's hot (20)
RISK SHARING IN TRADITIONAL CONSTRUCTION CONTRACTS FOR BUILDING PROJECTS
RISK SHARING IN TRADITIONAL CONSTRUCTION CONTRACTS FOR BUILDING PROJECTS
Viewers also liked
Curso enfermedades profesionales
Este curso trata sobre enfermedades profesionales. Se analizan las causas y consecuencias de las enfermedades derivadas del trabajo, así como las medidas de prevención y protección laboral.
Clasificacion final 2013/14
El resumen presenta los resultados del sexto concurso de palomas de trabajo, suelta, hembreo y zuriteo del Club de Palomas de Trabajo, Suelta Hembreo y Zuriteo. El concurso se celebró entre noviembre de 2013 y mayo de 2014. La lista incluye el número de socio, las puntuaciones de cada participante en suelta, hembreo y zuriteo, y su clasificación final en cada categoría.
Mapa Oficial Leaf green e Fire Red
Mapa da Liga Leaf Green e Fire Red lançamento da Liga Double Cards em 2005 , o mapa foi feito na mão na época mais até hoje essa Liga tem muita repercussao na Double Cards.
Lessons learnt
The course taught that ideas are not spontaneous and can be extracted through limited structure and reframing problems. It exposed tools like environmental scanning, 6 thinking hats, and mind maps to help access blind spots and circumvent barriers so creative juices can flow freely in developing ideas. These lessons in creativity and communication were integrated into the person's project work and organization as practical innovations.
Viewers also liked (13)
More from Kristopher Thorpe
TROLLEY-Layout1
This technical drawing shows the side plate of a trolley, including dimensions and hole specifications. It was drawn by K. Thorpe on October 2, 2014 for Central Carolina Technical College's Engineering Graphics Technology program. The drawing is number 3 of 8 for the trolley project.
TROLLEY - WHEEL-Layout1
This drawing shows details of a trolley wheel, including dimensions and notes. It was drawn by K. Thorpe on October 30, 2014 for Central Carolina Technical College's Engineering Graphics Technology program. The drawing depicts the profile of a wheel with various radii, diameters, and other geometric specifications.
TROLLEY - SNAPS-Layout1
This technical drawing shows the dimensions for a trolley axle and wheel assembly with two snap rings to hold the axle in place and four snap rings for the wheels. It was drawn by K. Thorpe on November 5, 2014 for a class project at Central Carolina Technical College.
TROLLEY - SIDE PLATE-Layout1
This technical drawing shows the side plate component of a trolley system, including its dimensions and hole placement. It was drawn by K. Thorpe on December 8, 2014 for Central Carolina Technical College's Engineering Graphics Technology program. The side plate is approximately 8 inches long and 7 inches high with various holes and cutouts as indicated on the scale drawing.
TROLLEY - AXLE-Layout1
The drawing depicts an axle for a trolley with dimensions, including an overall length of 2.875 inches, diameter of 0.875 inches, and thickness of 0.1040 inches. It was drawn by K. Thorpe for Central Carolina Technical College's Engineering Graphics Technology course, and is drawing number 5 of 8 in the Trolley - Axle series.
TROLLEY - ASSEMBLY-Layout1
This drawing document provides assembly details for a trolley. It was drawn by K. Thorpe on December 1, 2014 at an unspecified scale for Central Carolina Technical College's Engineering Graphics Technology program. The drawing is numbered 1 of 8.
any angle Eccentric-Layout1
This technical drawing shows dimensions for an eccentric any angle tool vice. Key dimensions include the diameter and thickness of various cylindrical and circular features ranging from .125 to 1.281 units. The drawing also lists the drafter, date, scale, title, CAD file information, and school where it was created.
any angle tool holder-Layout1
This drawing shows a compound tool holder with various dimensions and features including holes, diameters, angles, chamfers, and notes. It was drawn by C.J. Ingram for Central Carolina Technical College's Engineering Graphics Technology program and provides the details to manufacture the tool holder.
any angle upper member-Layout1
This document contains technical drawings and specifications for an upper compound member including dimensions, tolerances, notes and labels such as the title, scale, part number, date, and initials of the designer and checker. Key specifications include an outside diameter of 1.75 inches, a radius of 1.999 inches, a length of 15.1 inches, angles of 40 and 15 degrees, and thread specifications.
GEAR PULLY - CLEVIS PIN-Layout1
The drawing depicts a gear puller with clevis pin attachment. It shows the dimensions and specifications for the gear puller's clevis pin connection point, including diameters of 0.4380 and 0.3100 inches, a 0.0300 inch by 45 degree chamfer, and 0.0940 inch diameter pin hole. The drawing also lists the date of November 20, 2014, was drawn by K. Thorpe and checked by the engineering graphics technology department at Central Carolina Technical College.
GEAR PULLY - YOKE-Layout1
This drawing shows a gear puller yoke with technical specifications. It was drawn by K. Thorpe on December 8, 2014 for Central Carolina Technical College's Engineering Graphics Technology program. The yoke has symmetrical features including rounded edges and holes, and notes specify fillet and round radii unless otherwise indicated.
GEAR PULLER - ASSEMBLY-Layout1
This drawing shows the assembly of a gear puller with 5 main parts: a yoke, arm, lead screw, clevis pin, and cotter pin. The drawing was created by K. Thorpe on 11/20/2014 for Central Carolina Technical College's Engineering Graphics Technology course. It includes the quantities needed for each of the 5 parts that make up the gear puller assembly.
PLUG VALVE - ASSEMBLEY-Layout1
This drawing document provides assembly details for a plug valve. It was drawn by K. Thorpe on December 1, 2014 at a metric scale for Central Carolina Technical College's Engineering Graphics Technology program. The drawing is numbered 1 of 6.
PLUG VALVE - HANDLE-Layout1
This technical drawing shows details of a plug valve handle. It includes dimensions for the main cylindrical handle that is 80mm long with diameters of 11mm and 9mm at each end connected by tapers with radii of 2.5mm and 1mm. Four holes with a diameter of 6mm are located around the middle section.
PLUG VALVE - HOUSING-Layout1
This drawing shows the housing component of a plug valve. It includes dimensions for the outer diameter, holes, and ribs. The housing has an outer diameter of 88mm and contains three evenly spaced ribs with a radius of 2mm on the interior. Smaller holes of varying diameters are placed throughout for connections. The title, scale, and other identifying information are present to specify the part and conform to engineering drawing standards.
PLUG VALVE - PUG-Layout1
This technical drawing shows a plug valve design with dimensions. The plug valve features a cylindrical plug that fits inside a tapered valve body. Key dimensions include the plug diameter of 16mm, valve body diameters of 26.5mm and 38.5mm, and plug length of 30mm. The drawing was created by K. Thorpe for a class project at Central Carolina Technical College and checked for accuracy.
PLUG VALVE - CAP-Layout1
This drawing depicts a plug valve cap with dimensions and tolerances. It was drawn by K. Thorpe on an unspecified date for Central Carolina Technical College's Engineering Graphics Technology program. The drawing number is 2 of 6 and shows the cap has an outer diameter of 110mm, four radius 4 corners, and two M42 threads that are 2mm deep.
PLUG VLAVE - PIN-Layout1
This drawing shows a plug valve pin with dimensions and tolerances. The pin is approximately 27mm long and tapers from a diameter of 17mm on one end to 27mm on the other. Small chamfers are placed at various edges. The drawing title is "PLUG VALVE - PIN" and it was drawn by K. Thorpe for Central Carolina Technical College Engineering Graphics Technology.
Board-Layout1
This drawing shows the dimensions of a board with a rectangular shape. The board is 111 centimeters long and 29.25 centimeters wide. It was drawn by K. Thorpe on September 23, 2014 at a metric scale for Central Carolina Technical College's Engineering Graphics Technology program.
PAWN A-Layout1
This technical drawing document contains dimensions and specifications for a part called "Pawn A". It includes measurements in millimeters for the part's features and geometry. The document also lists the date it was drawn, the scale, the drawing title, file information, and notes that it was drawn and checked by students at Central Carolina Technical College for their Engineering Graphics Technology program.
More from Kristopher Thorpe (20)
any angle upper plate-Layout1
- 1. .187 .28 .56 .75 3.50 3.00 2.25 1.00 .75 1.00 2.00 R.1325 2X Ø.281 vØ.406 x.156 3X Ø.125 90° 2.00 40° .125 32° R.125 R1.687 R1.375 .25 .25 .063 DRAWN BY: C.J. INGRAM DATE: SCALE: 1:1 DRAWING TITLE: ANY ANGLE TOOL VICE - UPPER PLATE CAD FILE: F:MULTIVIEW DRAWINGSTOOL VICE - UP PLATE.DWG 12/1/2014 DRAWING NO: 6 OF 11 SIZE: A CENTRAL CAROLINA TECHNICAL COLLEGE ENGINEERING GRAPHICS TECHNOLOGY CHECKED BY:DCT GRADE: