The document is a cover letter and resume for an automation engineer with over 8 years of experience in automation projects. It outlines their experience with programming PLCs, HMI/SCADA systems, VFDs and soft starters from manufacturers like Allen Bradley and Danfoss. It also lists their skills in electrical installation, commissioning, project management, coordination with clients and vendors, and developing technical documentation.
Seeking a career as a offshore wind technician where my knowledge of electrical/hydraulic troubleshooting, a high mechanical aptitude, and an unyielding commitment to safety can effectively contribute to the successful and profitable operation of the company.
Distributed Control System (DCS) Applications, Selection & TroubleshootingpetroEDGE
Since the first Distributed Control System was installed in the late 1970’s, the concept of DCS has swept alternative control technologies from the field. The substantial growth, in the construction of plants in the traditional heavy process industries, such as power generation, refining, oil and gas, water and petrochemicals, is driving significant growth in the utilization of DCS. The broad architecture of a solution involves either a direct connection to physical equipment, such as switches, pumps and valves or connection via a fieldbus communication system.
Seeking a career as a offshore wind technician where my knowledge of electrical/hydraulic troubleshooting, a high mechanical aptitude, and an unyielding commitment to safety can effectively contribute to the successful and profitable operation of the company.
Distributed Control System (DCS) Applications, Selection & TroubleshootingpetroEDGE
Since the first Distributed Control System was installed in the late 1970’s, the concept of DCS has swept alternative control technologies from the field. The substantial growth, in the construction of plants in the traditional heavy process industries, such as power generation, refining, oil and gas, water and petrochemicals, is driving significant growth in the utilization of DCS. The broad architecture of a solution involves either a direct connection to physical equipment, such as switches, pumps and valves or connection via a fieldbus communication system.
5 Tips for Using TIA Portal V14 to Decrease Safety Development Time DMC, Inc.
Presenter - Ryan Landwehr
The release of Totally Integrated Automation Portal V14 made significant improvements to SIMATIC STEP 7 Safety. We will demonstrate how these new features can decrease development time and significantly decrease wiring while maintaining or improving the SIL or PL.
This presentation will discuss how to use these new features, including S7-1200F PROFIsafe communication and distributed safety using F-I-Device communication. We will also explore ways to program your Siemens safety PLC effectively and efficiently through reusable safety function blocks, PLC data types, and built-in Siemens safety blocks.
IN-PLANT TRAINING PROGRAMS
Prolific Systems & Technologies Pvt. Ltd.
Started in 1997 by technocrat promoters with engineering background and industrial work experience. Prolific provides turnkey automation solutions and Technical training services to over 200 manufacturing firms across the globe.
Executed over 500 in-plant training programs for well known companies including 50+ Fortune 1000 companies.
On-site training courses are available for our customers that have a requirement for a tailored course. These specific course typically provide cost benefits to customers that have at least eight (8) employees who need professional development training provided within its premises or at any other convenient location
We can provide off-the-shelf courses on a wide range of technical topics. we can also customize them to bring maximum benefit in the shortest possible time
In-plant training
* Electrical Engineering
* Mechanical Engineering
* Instrumentation Engineering
* Process Automation & Controls
* Oil & Gas
* Steel Production
* Welding Technologies
Thanks & Regards
Sagar Parab | Head- Corporate Training Department ( Customized Technical Training)
Prolific Systems and Technologies Pvt. Ltd.
Cell +91 9223525017 / +91 022 - 65200135
Fax No. 022 21731822
Email1: sagar@prolific-trg.com
Email2: sagar.prolific@gmail.com
Degree'd 30 year Instrumentation & Controls Professional with over twenty-five years Petrochemical, Power Transformers, DCS and Custom Automation projects experience including designing & commissioning PLC based controls systems. Experience programming RsView & PLC’s & HMI’s. Accomplished Team Player with a strong work ethic & positive attitude. Willing and able to effectively manage multiple tasks in stressful situations with tight deadlines. Seeking a career opportunity to utilize my education, training and controls knowledge working in a team environment with a stable and progressive company.
Western Carolina University - B.S. Manufacturing Engineering
5 Tips for Using TIA Portal V14 to Decrease Safety Development Time DMC, Inc.
Presenter - Ryan Landwehr
The release of Totally Integrated Automation Portal V14 made significant improvements to SIMATIC STEP 7 Safety. We will demonstrate how these new features can decrease development time and significantly decrease wiring while maintaining or improving the SIL or PL.
This presentation will discuss how to use these new features, including S7-1200F PROFIsafe communication and distributed safety using F-I-Device communication. We will also explore ways to program your Siemens safety PLC effectively and efficiently through reusable safety function blocks, PLC data types, and built-in Siemens safety blocks.
IN-PLANT TRAINING PROGRAMS
Prolific Systems & Technologies Pvt. Ltd.
Started in 1997 by technocrat promoters with engineering background and industrial work experience. Prolific provides turnkey automation solutions and Technical training services to over 200 manufacturing firms across the globe.
Executed over 500 in-plant training programs for well known companies including 50+ Fortune 1000 companies.
On-site training courses are available for our customers that have a requirement for a tailored course. These specific course typically provide cost benefits to customers that have at least eight (8) employees who need professional development training provided within its premises or at any other convenient location
We can provide off-the-shelf courses on a wide range of technical topics. we can also customize them to bring maximum benefit in the shortest possible time
In-plant training
* Electrical Engineering
* Mechanical Engineering
* Instrumentation Engineering
* Process Automation & Controls
* Oil & Gas
* Steel Production
* Welding Technologies
Thanks & Regards
Sagar Parab | Head- Corporate Training Department ( Customized Technical Training)
Prolific Systems and Technologies Pvt. Ltd.
Cell +91 9223525017 / +91 022 - 65200135
Fax No. 022 21731822
Email1: sagar@prolific-trg.com
Email2: sagar.prolific@gmail.com
Degree'd 30 year Instrumentation & Controls Professional with over twenty-five years Petrochemical, Power Transformers, DCS and Custom Automation projects experience including designing & commissioning PLC based controls systems. Experience programming RsView & PLC’s & HMI’s. Accomplished Team Player with a strong work ethic & positive attitude. Willing and able to effectively manage multiple tasks in stressful situations with tight deadlines. Seeking a career opportunity to utilize my education, training and controls knowledge working in a team environment with a stable and progressive company.
Western Carolina University - B.S. Manufacturing Engineering
Air voice technologies provides various training programs related to electronic/Electrical/Instrumentation Engineering like
Industrial Automation training
Telecommunication
Electrical designing and drafting
HVAC designing
PLC+SCADA training
Embedded system
1. COVER LETTER
As professional +8.0 Years of experience in Automation Industry, Process Control & Project Execution, Planning,
Procurement and EPC firms of Designing, erection, installation, commissioning, operation and maintenance of
Control, Instrumentation and Automation system based on PLC/RTU/DCSSCADA/HMI/DRIVES/Electrical system.
JOB PROFILE AND RESPOSIBILITIES
ENGINEERING ACTIVITES
Signal & Control wiring of PLC Control Panel, Motor Control panel Start-Delta & DOL Motor, VFD and Soft
starter panel, RTU, Instrument Control Panel and Network panel as per design and drawing.
Installation, Programming and Commissioning of Electrical System (MCC, PCC, VFD & Soft-Starter).
Installation, Programming (Ladder logic & Functional block diagram) and Commissioning of PLC control
system.
Designing and develop of HMI/MMI and SCADA graphics, Trends, Alarms and Event, Security.
Full Integration of multiple third party hardware, field process instruments, HMI/SCADA system with PLC
control system.
Attend service call to generate analysis report and troubleshoot the PLC, SCADA,HMI VFD, Soft-Starter
and Network related problem.
Prepare Electrical and Control PLC drawing of the Automation and Instrumentation Control system.
On-siteErection, Installation,and Commissioningactivitiesof electrical, Instrumentation and Automation.
Cable Tray Work (GI Ladder/Perforated type) •Cable Tray and Cable Lay job for LT equipments, Instrument
(Control & Signal) and Communication. • Cable Glanding & Termination (Single/Double Compression and
PG Glands).
Programing of Allen Bradley Programmable logic controller (PLC), VFD and Soft starter & Develop SCADA
and HMI/MMI Graphics, alarms, event & trends on Allen Bradley Man Machine Interface (HMI) Graphic
terminal and PC based Standalone & Network (Distributed Server-Client) SCADA Station.
Erection, Installation, calibration of the process instruments and integrates with PLC/SCADA Automation
system. Integrate the electrical meters, safety relays and numeric relays with PLC/SCADA Automation
system.
Integrate distributed PLC/SCADA Automation system thru multiple communication technology s uch as
GSM/GPRS, RF, V-SAT and OFC.
Prepare Input and Output list for designing of Automation and Instrumentation system.
Prepare Load list for Electrical, Automation and Instrumentation system.
Preparation of technical datasheets for Control & Instrumentation system.
Selection of instruments, prepare instrument datasheet, hook-up drawing.
Selection of electrical switchgears,cablesizing(LT, Communication,Control & •Instrumentation) including
voltage drop calculation, cable tray sizing, UPS Selection and battery sizing.
Prepare project report on multipletasks by co-ordinates with design engineer, production & procurement
department and project engineer.
Continue in touch with higher management and customer/client with the project progress report and
ongoing activities & schedules.
Understanding & coordinating client’s needs / enhancements, customization, software-related issues,
providing solutions in adherence to delivery schedules
PROJECT MANGEMENT ACTIVITES
Co-ordination with various in-houseand external agencies likeclient,vendor, sub-contractors,design
department, production, accountand servicedepartment for timely and satisfactory completion of
project.
Planningfor projectactivities involvingScoping,Estimation,Tracking,Delivery Management & Post
Implementation support and ensuringon time delivery of projects
Creates work plans and costestimates in own area of responsibility, man power requirement and ensure
quality deliverableson time and within targeted cost.
2. Prepare of Techno-Commercial Proposal,Technical Solutions& Tender document designingfor SCADA
PLC based Automation system for multipleautomation vendor.
Closefollow-ups to Procurement & production department and vendor to manufacturing,availability of
material and dispatch the automation system within time.
Team building/management
Project lifecyclemanagement as well as operation and maintenance.
Attend pre-bid meeting and prepare pre-bid query and present solution.
Leading and managing team member for expertise-technical and non-technical,effectively and efficiently.
Allocations of daily production work,monitoringquality records and ensuringquality checks.
Implementing project plans within pre-setbudgets and deadlines.
Assists customers on technical issues, interacts with official contacts, contractors and other staff within
his/her scope of deliverables. Assist communication pertaining to specific assignments or meetings.
Assigns tasks to and coordinates work with entry level engineers, technicians, and admi nistrative staff.
Evaluates, selects and applies standard techniques and procedures to perform engineering assignments.
Provides technical support for testing, installation and commissioning activities
KEY SKILL AND EXPERTISE
INDUSTRIAL AUTOMATION PRODUCTS WORKED ON
HARDWARE – PROGRAMMING AND COMMISSIONING EXPERTISE
Allen Bradley PLC Control
System
• 1747 SLC 5/05 Controller PLC (L551 & L552) • Micrologix Controller PLC (1761,
1762, 1763, 1763, 1766) • 1769 Compact Logix Controller PLC (1769-L1x, 1769-
L2x, 1769-L3x) • 1756 Control Logix Controller PLC (1756-L1x, L2x, L3x, L-6x) •
Micro 800 Controller PLC (Micro 830 & Micro850)
Allen Bradley Variable
Frequency Drive (VFD)
• Power Flex Compact Class Drive - 4/40/400, 523/525 Series
• Power Flex Architecture Class Drive – 70/753/755 Series
Allen Bradley Soft-Starter • SMC-Flex Low Voltage Starter • SMC-3 Low Voltage Starter • SMC-50
Allen Bradley Graphic
Terminals (HMI)
• 2711C- Panel View Component Graphic Terminals • 2711PC- Panel View Plus 6
Compact Graphic Terminals • 2711P Panel View Plus 6and 7 Graphic Terminals
Danfoss Soft-Starter • VLT Softstater – MCD 500
Danfoss VFD • VLT Aqua Drive-FC202
SOFTWARE - PROGRAMING AND HMI / SCADA DESIGNING EXPERTISE
PLC Programing Software • RS Logix 500 • RS Logix 5000 • Connected Work Bench
Allen Bradley SCADA and
Data Management
Software
• Factory Talk View Studio Machine Addition • Studio 5000 View Designer for HMI
Station (2715-Panel View 5500) • Factory Talk View Studio Site Addition for
Standalone and Network SCADA Station • RS View 32 Studio • Factory Talk View
Point • Factory Talk Historian.
Allen Bradley Drive S/w •Drive Explorer •9303 Drive Tool
Allen Bradley Network
Management Software
•RS Networx – DeviceNet, ControlNet & Ethernet
• Device Level Ring Network • RS Linx Classic • Factory Talk Gateway.
OPC Software • Kepserver • RS Linx Classic and Factory Talk Gateway OPC • Matrikon OPC
ABB SCADA Software • Compact HMI 800 Base Systems.
SCHNEIDIER SCADA • Wornderware Archestra •In Touch
COMMUNICATION
PROTOCOL
• DH+ • DF1 (Full/Half Duplex) •Ethernet over LAN and OFC •Modbus Serial
•Modbus TCP/IP •Rockwell DeviceNet, ControlNet and Ethernet TCP/IP •
DNP3.0Slave