Gate screw jack, hydraulic sluice gate actuators, sluice gate electric actuator, linear actuator gate opener, sluice gate hoist

•

0 likes•733 views

gate screw jack, hydraulic sluice gate actuators, sluice gate electric actuator, linear actuator gate opener, sluice gate hoist features: Important Components: 1. Heavy duty and self lock screw jack. Special requirements stainless steel jack 2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism. 3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover. 4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke. Other Features: 1. Inverted type installation, tension load. 2. Translating screw with female thread cylinder rod clevis end. 3. Low speed gear ratio screw jack with gear reduction mechanism geared motor. 4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length. 5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements. 6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force. 7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed. Customers Used Screw Jacks Models: 1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.

Business

Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
Screw Jack For Raising and Lowering Sluice Gate
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction
mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel
stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when
full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing
height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force,
water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500
mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm,
6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum
tension lifting force, inverted mounting screw jack, translating screw configuration, long
travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter,
protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit
switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum
tension lifting force, inverted mounting screw jack, translating screw configuration, long
travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter,
protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit
switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum
tension lifting force, inverted mounting screw jack, translating screw configuration, long
travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter,
protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit
switches.

Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack

Jtb 200 kn ball screw jack, 20 ton spiral worm gear ball screw jack, 20t ball worm screw lift, 20000 kg ball screw gear lift, 50000lb capacity 63mm ball jack screw features: 1. Lifting force 196kN. Under max. lifting force, input shaft required torque, high ratio 104.5Nm, low ratio 54.2Nm. 2. Ball screw diameter 63 mm, lead 16 mm. 3. High worm gear ratio 1/8, low worm gear ratio 1/24. 4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation. 5. High speed, high precision, high efficiency, high duty cycle, high performance, high frequency operation, low drive torque, long service life. 6. motorized ball screw jack by 3-phase or single phase electric motor/gearmotor, manual ball screw jack by handwheel/crank. 7. Ball screw ends include top plate, clevis end, plain end and threaded end. 8. Individually or multiple ball screw jack lift system arrangements are available. 9. Equivalent to Japan TSUBAKI JWB200 ball screw jack and MAKISHINKO JB200 ball screw jack. Note: ball screw without self-locking, braking motor, brake mechanism or other locking systems are required when keep the position. When a motorized ball screw jack, less power is required than an equivalent size JTM200 machine screw jack.

Jtw 2.5 t worm screw jack, acme ball screw jack, 2.5 ton acme screw linear ac...

Jacton Electromechanical Co.,Ltd

Jtw 2.5 t worm screw jack, acme ball screw jack, 2.5 ton acme screw linear actuator, 25 kn acme screw jack load capacity, 5000lbs jack screw acme nut features: 1. Maximum load capacity 2.5 ton, maximum torque 18 Nm. 2. Lift screw diameter 30 mm, pitch 6 mm. 3. 6:1, 24:1 gear ratios 4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation. 5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems. 6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both. 7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 1500 mm/min and 375 mm/min. 8. No standard lift screw stroke, maximum travel stroke 1500mm when tension load. 9. Top plate, clevis end, plain end and threaded end are available. 10. Individually or multiple screw jack lift system arrangements are available. 11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry. 12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.

Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acm...

Jacton Electromechanical Co.,Ltd

Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acme screw jack linear, 10000lbs acme thread screw jack, compact acme screw jacks features: 1. Maximum load capacity 5 ton, maximum torque 44.2 Nm. 2. Lift screw diameter 40 mm, pitch 7 mm. 3. 6:1, 24:1 gear ratios 4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation. 5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems. 6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both. 7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 1750 mm/min and 437.5 mm/min. 8. No standard lift screw stroke, maximum travel stroke 2000mm when tension load. 9. Top plate, clevis end, plain end and threaded end are available. 10. Individually or multiple screw jack lift system arrangements are available. 11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry. 12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.

Jtc500 worm gear screw lifter,2 inches stroke machine screw jacks,50t jack sc...

Jacton Electromechanical Co.,Ltd

Jtc500 worm gear screw lifter,2 inches stroke machine screw jacks,50t jack screw arrangement,50 ton screw jack lift,500 kn gear lift, screw jack vertical arrangement,50 tonnes acme screw adjuster mechanism static load capacity 500 kn, high speed torque 442 n.m, low speed torque 148 n.m. lead screw (spindle) Tr120x14. high speed gear ratio 1/14, low speed gear ratio 1/56. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 5500 mm stroke. single screw jack or multiple screw jacks system arrangements.

Jtw 25 t worm screw jack, 25 ton acme screw actuator, 250 kn linear actuator ...

Jacton Electromechanical Co.,Ltd

Jtw 25 t worm screw jack, 25 ton acme screw actuator, 250 kn linear actuator acme screw jack, linear ball screw actuator, 50000 lbs screw driven linear actuator, 25t machine screw actuator features: 1. Maximum load capacity 25 ton, maximum torque 314 Nm. 2. Lift screw diameter 90 mm, pitch 16 mm. 3. 32:3, 32:1 gear ratios 4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation. 5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems. 6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both. 7. 3-phase or single phase motor driven with 1000 rpm input, standard lifting speed 1500 mm/min and 500 mm/min. 8. No standard lift screw stroke, maximum travel stroke 3500mm when tension load. 9. Top plate, clevis end, plain end and threaded end are available. 10. Individually or multiple screw jack lift system arrangements are available. 11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry. 12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.

Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specific...

Jacton Electromechanical Co.,Ltd

Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specifications, 500 kn screw jack threaded rod, 100000 lbs screw jack torque calculation, screw jack thread type features: 1. Maximum load capacity 50 ton, maximum torque 848 Nm. 2. Lift screw diameter 120 mm, pitch 20 mm. 3. 33:3, 32:1 gear ratios 4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation. 5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems. 6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both. 7. 3-phase or single phase motor driven with 1000 rpm input, standard lifting speed 1818 mm/min and 625 mm/min. 8. No standard lift screw stroke, maximum travel stroke 5500mm when tension load. 9. Top plate, clevis end, plain end and threaded end are available. 10. Individually or multiple screw jack lift system arrangements are available. 11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry. 12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.

Jtw 10 t worm screw jack, acme screw drive, 10 ton acme screw driven linear a...

Jacton Electromechanical Co.,Ltd

Jtw 10 t worm screw jack, acme screw drive, 10 ton acme screw driven linear actuator, 100 kn acme lead screw jack efficiency, 20000 lbs acme screw thread jack efficiency features: 1. Maximum load capacity 10 ton, maximum torque 108 Nm. 2. Lift screw diameter 58 mm, pitch 12 mm. 3. 23:3, 24:1 gear ratios 4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation. 5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems. 6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both. 7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 2348 mm/min and 750 mm/min. 8. No standard lift screw stroke, maximum travel stroke 2500mm when tension load. 9. Top plate, clevis end, plain end and threaded end are available. 10. Individually or multiple screw jack lift system arrangements are available. 11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry. 12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.

A new range of PSC Hands-off safety tools(lift assist manual lifting aids), it prevents back pain problems from bending, and simultaneously improves ergonomics in workplace. It also reduces possible chances of hand and finger injuries associated with lifting carrying the small equipment with bare hands. The manual lifting aids are used with chicksan and bop choke valves, pup joints, fishing tools, pipe, tubing, deck cargo etc.

Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn scre...

Jacton Electromechanical Co.,Ltd

Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn screw thread actuator lift, 50000 lbs worm screw actuator, worm gear screw actuator, worm gear linear actuator features: 1. Maximum load capacity 20 ton, maximum torque 228 Nm. 2. Lift screw diameter 65 mm, pitch 12 mm. 3. 8:1, 24:1 gear ratios 4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation. 5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems. 6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both. 7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 2250 mm/min and 750 mm/min. 8. No standard lift screw stroke, maximum travel stroke 3000mm when tension load. 9. Top plate, clevis end, plain end and threaded end are available. 10. Individually or multiple screw jack lift system arrangements are available. 11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry. 12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.

CHAIN-PRODUCT- USA-FOLLETO

villaallendemagazine

Kubota l3430 tractor service repair manual

fhhsjdkmem

Kubota l3130 tractor service repair manual

fjskekazswdmme

KUBOTA L4630 TRACTOR Service Repair Manual

fusefjjjsekkemd

This is the Highly Detailed factory service repair manual for theKUBOTA L4630 TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KUBOTA L4630 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly. Service Repair Manual Covers: General Engine Clutch Transmission Rear Axle Brake Front Axle Steering Hydraulic System Electrical System Cabin File Format: PDF Compatible: All Versions of Windows & Mac Language: English Requirements: Adobe PDF Reader NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKUBOTA L4630 TRACTOR Service Repair Workshop Manual. Looking for some other Service Repair Manual,please check: https://www.aservicemanualpdf.com/ Thanks for visiting!

manual screw jack with hand wheel operation adjusting upper rolls in Coil Pro...

Jacton Electromechanical Co.,Ltd

manual screw jack with hand wheel operation adjusting upper rolls in Coil Processing Sheet Slitter Line.Two worm gear screw jacks are connected by a line shafting, a 8" diameter hand wheel manual adjustment upper rolls in the vertical plane to permit synchronized roll penetration into the material to be achieved from the operator side of this machine, and all lower flattening rolls and pinch rolls are fixed. Two worm gear screw jacks model JT-3T-IS-300-H-II-C-PP/HW, maximum load capacity 3 ton, inverted translating screw type, 300mm(12") travel stroke, high gear ratio 1/6, clevis end, double input worm shaft, additional protective pipe for dust-proof and 8" diameter hand wheel.

5 ton machine screw jacks, 20 ton upright translating screw jacks for lift di...Jacton Electromechanical Co.,Ltd

Webtools WGO135 Cable Gripping & Lifting Tools - Data Sheet

Thorne & Derrick International

Ring spinning-BSLRajeev Sharan

Torque systems ms400_specsheetElectromate

TS-04A 150X20mm WPC outdoor decking

威小

Webtools SL55 Softline Cutters - Data Sheet

Thorne & Derrick International

Solar tracking screw jack, ball screw jack applications solar panels, solar s...

Jacton Electromechanical Co.,Ltd

solar tracking screw jack, ball screw jack applications solar panels, solar screw jack, screw jack type solar tracker motor, solar jacks and actuators regular screw jack model: JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP 10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism. Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.

Solar actuators and motorized jacks, solar tracking jacks and actuators, sola...

Jacton Electromechanical Co.,Ltd

solar actuators and motorized jacks, solar tracking jacks and actuators, solar tracking drive jacks, solar tracking drive actuators, self-locking powered actuators regular screw jack model: JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP 10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism. Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.

Solar jacks type, solar panel positioning gears jack, solar tracker jack with...

Jacton Electromechanical Co.,Ltd

solar jacks type, solar panel positioning gears jack, solar tracker jack with ball joint, uses of solar power screw jack, screw jack for solar panel tracking system mechanism regular screw jack model: JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP 10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism. Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.

Worm screw jack for solar trackers, solar tracking machine screw jack actuato...

Jacton Electromechanical Co.,Ltd

Worm screw jack for solar trackers, solar tracking machine screw jack actuators, electric lightweight scew jacks solar tracking, self positioning solar panel jack regular screw jack model: JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP 10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism. Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.

Solar panel adjustment jack, solar panel tracking using screw jacks, solar tr...

Jacton Electromechanical Co.,Ltd

solar panel adjustment jack, solar panel tracking using screw jacks, solar tracker linear actuator, solar system screw drive, solar positioning system screw jack regular screw jack model: JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP 10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism. Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.

Miniature worm gear acme mechanical jacks, micro miniature actuators, micro-m...

Jacton Electromechanical Co.,Ltd

Mini manually operated screw driven jacks, lightweight screw jacks, light dut...

Jacton Electromechanical Co.,Ltd

Miniature screw jacks, miniature acme shafts jack, small worm gear jack screw...

Jacton Electromechanical Co.,Ltd

Miniature lifting screw jack, light duty screw jack rod, miniature screw jack...

Jacton Electromechanical Co.,Ltd

What's hot

PSC Lift-Mate Manual Lifting Aids

Project Sales Corp

Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn scre...

Jacton Electromechanical Co.,Ltd

CHAIN-PRODUCT- USA-FOLLETO

villaallendemagazine

Kubota l3430 tractor service repair manual

fhhsjdkmem

Kubota l3130 tractor service repair manual

fjskekazswdmme

KUBOTA L4630 TRACTOR Service Repair Manual

fusefjjjsekkemd

manual screw jack with hand wheel operation adjusting upper rolls in Coil Pro...

Jacton Electromechanical Co.,Ltd

5 ton machine screw jacks, 20 ton upright translating screw jacks for lift di...Jacton Electromechanical Co.,Ltd

Webtools WGO135 Cable Gripping & Lifting Tools - Data Sheet

Thorne & Derrick International

Ring spinning-BSLRajeev Sharan

Torque systems ms400_specsheetElectromate

TS-04A 150X20mm WPC outdoor decking

威小

Webtools SL55 Softline Cutters - Data Sheet

Thorne & Derrick International

What's hot (13)

PSC Lift-Mate Manual Lifting Aids

Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn scre...

CHAIN-PRODUCT- USA-FOLLETO

Kubota l3430 tractor service repair manual

Kubota l3130 tractor service repair manual

KUBOTA L4630 TRACTOR Service Repair Manual

manual screw jack with hand wheel operation adjusting upper rolls in Coil Pro...

5 ton machine screw jacks, 20 ton upright translating screw jacks for lift di...

Webtools WGO135 Cable Gripping & Lifting Tools - Data Sheet

Ring spinning-BSL

Torque systems ms400_specsheet

TS-04A 150X20mm WPC outdoor decking

Webtools SL55 Softline Cutters - Data Sheet

Similar to Gate screw jack, hydraulic sluice gate actuators, sluice gate electric actuator, linear actuator gate opener, sluice gate hoist

Solar tracking screw jack, ball screw jack applications solar panels, solar s...

Jacton Electromechanical Co.,Ltd

Solar actuators and motorized jacks, solar tracking jacks and actuators, sola...

Jacton Electromechanical Co.,Ltd

Solar jacks type, solar panel positioning gears jack, solar tracker jack with...

Jacton Electromechanical Co.,Ltd

Worm screw jack for solar trackers, solar tracking machine screw jack actuato...

Jacton Electromechanical Co.,Ltd

Solar panel adjustment jack, solar panel tracking using screw jacks, solar tr...

Jacton Electromechanical Co.,Ltd

Miniature worm gear acme mechanical jacks, micro miniature actuators, micro-m...

Jacton Electromechanical Co.,Ltd

Mini manually operated screw driven jacks, lightweight screw jacks, light dut...

Jacton Electromechanical Co.,Ltd

Miniature screw jacks, miniature acme shafts jack, small worm gear jack screw...

Jacton Electromechanical Co.,Ltd

Miniature lifting screw jack, light duty screw jack rod, miniature screw jack...

Jacton Electromechanical Co.,Ltd

Micro lifting mechanism, light duty screw jack, light weight miniature jacks,...

Jacton Electromechanical Co.,Ltd

Miniature linear screw adjustment, lightweight gear drive lifting, lightweigh...

Jacton Electromechanical Co.,Ltd

Miniature linear screw adjustment, lightweight gear drive lifting, lightweight screw mechanism for lifting, micro worm gear screw actuators Features 1. Lifting Force 2.5kN. Under max. lifting force, drive torque 1.2Nm (high speed), 0.4Nm (low speed). 2. Lifting screw diameter 16 mm, pitch 4 mm. 3. High gear ratio 1/4, low gear ratio 1/16. 4. Translating screw, travelling nut rotating screw, keyed translating screw configurations in upright or inverted mounting orientations. 5. Precision positioning, self-locking lead screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems. 6. Hand-operated screw jack by hand wheel or crank handle, or electric driven screw jack by 3-phase or single phase motor or gear reduction motor. 7. No standard lead screw travel length, all lead screw travel length is processed according customers requirements. Maximum permissible 300mm travel length. 8. Lead screw end fittings include top plate, clevis end, plain end and threaded end. 9. Individually or multiple screw jack lift system arrangements are available. Applications Micro-miniature screw jacks matching mini bevel gearboxes with parts are composed of small screw jacks lifting system, which widely used in beverage can conveyor systems height adjustment and beverage can washing area of the production line, saving man-hours and lowering the down time, crucial for increasing output and are extremely pleased with the recent financial benefits. Prior to the upgrade when the can washer area on each line required to be changed to accommodate a run taller or shorter cans the conversion would be completed manually. Small screw jack lifting systems is utilized several stages for washing and blow drying the cans. Suitable for lifting height adjustment and washing in aluminium can production lines, magnetic conveying systems, steel can line, aluminium can line, food can line, upgrade fill and packaging line, conversion steel aluminum can line, bottle conveyor systems, case and pallet conveyor systems.

Light weight screw lift equipment, 16mm screw jack gearbox, micro motor screw...

Jacton Electromechanical Co.,Ltd

Smallest cubic screw jack, miniature wormgear screw jack, 2.5kn cubic screw j...

Jacton Electromechanical Co.,Ltd

Mini screw lift jack, miniture lifter mechanism, light duty gear jack, light ...

Jacton Electromechanical Co.,Ltd

Mini worm gear screw jack, mini machine screw jack, micro worm drive lifting ...

Jacton Electromechanical Co.,Ltd

Mini screw jack lifting, micro worm gear screw lifter, micro screw jacks, min...

Jacton Electromechanical Co.,Ltd

Micro lift jack, small screw jacks, 2.5kn mini worm gear screw jack, mechanic...

Jacton Electromechanical Co.,Ltd

Small worm gear jack, acme miniature screw jack, miniature lifting jack screw...

Jacton Electromechanical Co.,Ltd

electric screw jack gear hoist raising lowering sluice gate of canal

Jacton Electromechanical Co.,Ltd

machine screw jack,electric machine screw actuator,electrical mechanical actu...

Jacton Electromechanical Co.,Ltd

machine screw jack,electric machine screw actuator,electrical mechanical actuators,manual actuator lifts features: 1. Lifting force 2.5kN to 1000kN. Under max. lifting force, input shaft required torque, high ratio 10.83Nm to 2040Nm, low ratio 0.42Nm to 1278Nm. 2. Machine screw diameter 12 mm to 150 mm, screw pitch 3 mm to 20 mm. 3. Worm gear ratio 1/5 to 1/36. 4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation. 5. Heavy duty, precision positioning, self-locking machine screw, low efficiency, low frequency, low travel speed, low duty cycle. 6. electric machine screw jack by 3-phase or single phase electric motor/gearmotor, manual machine screw jack by handle/crank. 7. Machine screw ends include top plate, clevis end, plain end and threaded end. 8. Individually or multiple machine screw jack lift system arrangements are available. 9. Application in steel, pipe, tube, plate, roll forming roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.

Similar to Gate screw jack, hydraulic sluice gate actuators, sluice gate electric actuator, linear actuator gate opener, sluice gate hoist (20)