electric screw jack gear hoist raising lowering sluice gate of canal
•
0 likes•281 views
electric screw jack gear hoist is widely used for raising lowering sluice gate of canal (inlet gate, intake gate, flushing gate, outlet gate) in modernization hydropower station or hydro-projects, which uses electric motor driven instead of human power manual operation. Selecting electric screw jack gear hoist following sluice gate sizes, weight, required travel speed etc.
Report
Share
Report
Share
Download to read offline
Recommended
Hydro electric
This presentation outlines the Nepal Electricity Authority and the Middle-Marsyangdi Hydroelectric Power Stations. It introduces NEA as the government agency responsible for electricity generation, transmission, distribution and pricing. It then describes the electrical power system in Nepal including generation at 11kV, transmission at 110-220kV, and distribution at 11kV and 220/380V. The presentation provides details on the 70MW Middle-Marsyangdi plant including its features, operating principles involving water intake, turbines and electricity generation, and key hydroelectric components like civil structures, mechanical equipment and electrical generators, transformers and protection systems.
transformer substation
This document discusses different forms of electricity production including solar, wind, geothermal, fuels, and bio-energy. It then covers transformers, including their components, types (step-up and step-down), cooling methods, and losses. The document also discusses substation busbar systems including single bus, double bus double breaker, and their advantages and disadvantages.
Braking and multi-quadrant operation of VSI drives,Cycloconverter based indu...
Cycloconverter based induction motor drive;
Braking and multi-quadrant operation of VSI drives;
Variable frequency control from a current source;
synchronous generator excitation
- Synchronous generator excitation requires varying levels of excitation depending on the machine's size, number of poles, speed, and desired regulation. Smaller machines with many poles require proportionally more excitation, while larger machines with fewer poles require less.
- Exciters are commonly built to operate at 125 or 250 volts. Larger alternators are better suited to 250-volt exciters to decrease current.
- Common excitation systems involve a self-excited or separately excited DC shunt generator. For larger machines, a separately excited main exciter driven by a pilot exciter is often used. Automatic voltage regulators aim to maintain a constant voltage despite load changes.
Excitation Synchronous Wind Power Generators With Maximum Power Tracking Scheme
This paper presents a novel wind power generator system that consists of an excitation synchronous generator, permanent magnet synchronous servo motor, and control system. The generator and servo motor share a coaxial configuration to integrate their powers. When wind speed varies, the servo motor provides compensatory power to maintain constant generator speed. A maximum power tracking scheme controls the exciter current to ensure the generator absorbs all available wind power. Simulation and experimental results demonstrate the feasibility of the proposed system to directly connect to the grid without a power converter.
Alternator excitation systems
A short description of different types of excitation system of Alternator, mainly focused on Hydro Alternators.
The Excitation system by SAI
This PPT is a complete description about the Function,principle,Types and working of Excitation System.
Low Voltage Motors
This document provides information about motors, including their main parts, types, maintenance, overhauling process, and safety procedures. It discusses the working principle of motors and lists common motor types like AC, DC, single phase, and squirrel cage induction motors. The overhauling process is described in steps from obtaining safety documentation to testing after reassembly. Key parts like the stator, rotor, bearings and housing are inspected. Common faults, protection devices, and safety precautions are also outlined.
Recommended
Hydro electric
This presentation outlines the Nepal Electricity Authority and the Middle-Marsyangdi Hydroelectric Power Stations. It introduces NEA as the government agency responsible for electricity generation, transmission, distribution and pricing. It then describes the electrical power system in Nepal including generation at 11kV, transmission at 110-220kV, and distribution at 11kV and 220/380V. The presentation provides details on the 70MW Middle-Marsyangdi plant including its features, operating principles involving water intake, turbines and electricity generation, and key hydroelectric components like civil structures, mechanical equipment and electrical generators, transformers and protection systems.
transformer substation
This document discusses different forms of electricity production including solar, wind, geothermal, fuels, and bio-energy. It then covers transformers, including their components, types (step-up and step-down), cooling methods, and losses. The document also discusses substation busbar systems including single bus, double bus double breaker, and their advantages and disadvantages.
Braking and multi-quadrant operation of VSI drives,Cycloconverter based indu...
Cycloconverter based induction motor drive;
Braking and multi-quadrant operation of VSI drives;
Variable frequency control from a current source;
synchronous generator excitation
- Synchronous generator excitation requires varying levels of excitation depending on the machine's size, number of poles, speed, and desired regulation. Smaller machines with many poles require proportionally more excitation, while larger machines with fewer poles require less.
- Exciters are commonly built to operate at 125 or 250 volts. Larger alternators are better suited to 250-volt exciters to decrease current.
- Common excitation systems involve a self-excited or separately excited DC shunt generator. For larger machines, a separately excited main exciter driven by a pilot exciter is often used. Automatic voltage regulators aim to maintain a constant voltage despite load changes.
Excitation Synchronous Wind Power Generators With Maximum Power Tracking Scheme
This paper presents a novel wind power generator system that consists of an excitation synchronous generator, permanent magnet synchronous servo motor, and control system. The generator and servo motor share a coaxial configuration to integrate their powers. When wind speed varies, the servo motor provides compensatory power to maintain constant generator speed. A maximum power tracking scheme controls the exciter current to ensure the generator absorbs all available wind power. Simulation and experimental results demonstrate the feasibility of the proposed system to directly connect to the grid without a power converter.
Alternator excitation systems
A short description of different types of excitation system of Alternator, mainly focused on Hydro Alternators.
The Excitation system by SAI
This PPT is a complete description about the Function,principle,Types and working of Excitation System.
Low Voltage Motors
This document provides information about motors, including their main parts, types, maintenance, overhauling process, and safety procedures. It discusses the working principle of motors and lists common motor types like AC, DC, single phase, and squirrel cage induction motors. The overhauling process is described in steps from obtaining safety documentation to testing after reassembly. Key parts like the stator, rotor, bearings and housing are inspected. Common faults, protection devices, and safety precautions are also outlined.
Seminar report on ultrasonic motor
This document provides an overview of ultrasonic motors. It discusses that ultrasonic motors use piezoelectric elements to generate ultrasonic vibrations that produce rotational or linear motion. The vibrations are amplified through resonance. Advantages over electromagnetic motors include high torque at low speeds, compact size, and insensitivity to magnetic fields. The document then describes various prototypes of linear and rotary ultrasonic motors and their design and modeling. It provides details on the operating principles and applications of ultrasonic motors.
Brushless excitation
The document describes a brushless generator system that uses a main exciter and pilot exciter to generate AC power from a rotating wheel. The main exciter rotor is powered by the permanent magnet generator and produces DC power that excites the generator stator to produce AC power at 50 Hz and 15.6 kV. The pilot exciter ensures stable voltage regulation of the main generator output.
Ultrasonic motor
Ultrasonic motors use piezoelectric materials to convert electrical energy into ultrasonic vibrations, generating motion through friction. They have a stator that transmits vibrations, a rotor that rotates, and a shaft that transfers the rotation. When voltage is applied, the piezoelectric ceramics in the stator vibrate and transmit the vibrations to the rotor through friction, inducing a traveling wave that creates torque to rotate the rotor. Ultrasonic motors offer advantages over conventional motors like high torque at low speeds, compact size, accuracy, and lack of electromagnetic interference. However, they require high-frequency power supplies and have lower durability. Major applications include cameras, hard drives, robots,
Three phase induction_motor(eee499.blogspot.com)
This document summarizes a graduation project on speed control of a three-phase induction motor using a pulse width modulation inverter. It contains chapters on the induction motor, PWM inverter design, and a practical drive circuit. The circuit uses a HEF-4752V PWM generation chip to generate sinusoidal PWM signals to control the inverter switches and thereby regulate motor speed. Diagrams of the motor equivalent circuit and torque-speed characteristics are provided to explain how speed can be varied by changing supply frequency or voltage. The document contains detailed circuit descriptions and explanations of motor and inverter operation.
Brushless DC Excitation Systems
This document is a project report on brushless excitation systems submitted to Jawaharlal Nehru Technological University. It was prepared by students Ravi, Sharmili, and Shravan under the guidance of S. Chandra Reddy of Bharat Heavy Electricals Limited. The report provides an overview of brushless excitation systems, which overcome issues with conventional brush gear systems and improve reliability. It describes the components, construction, cooling, metering and supervision of brushless excitation systems.
Alternatorexcitation
This document discusses the functions and components of excitation systems for synchronous generators. It provides definitions and examples of different types of excitation systems including DC, AC, static, and brushless systems. DC excitation systems used early DC generators as a power source but were large in size. AC excitation systems use alternators as the power source and rectifiers to convert AC to DC for the field windings. Static and brushless systems provide excitation through feedback without external DC sources. The document also includes diagrams of components like alternators, rectifiers, and regulators in excitation systems and mathematical models of the exciter field. It concludes that seminars on these topics help provide practical knowledge to understand generator operation.
Generator Voltage control
Synchronous generators have a rotor with windings that are excited by a rotating exciter. The exciter provides power to the rotor windings which generate a magnetic field. An automatic voltage regulator controls the generator output voltage by adjusting the field current using a thyristor circuit to bypass a portion of the excitation current. It compares the generator voltage to a setpoint and controls the thyristor firing pulses accordingly. In parallel operation, droop compensation equipment ensures uniform reactive power sharing by reducing the generator voltage linearly as reactive current increases.
Marelli Motori marine applications
Marelli Motori manufactures electric motor and generators for all marine applications where power is required. Our product applications include propulsion, thrusters, FI-FI system, auxiliaries, dredge pumps, winch and PTO-PTI system. Our machines are also suitable for shaft generators, hybrid machines, offshore, generators at variable speed and emergency applications.
Ultra sonic motor
This document discusses ultrasonic motors. It begins with an introduction describing how ultrasonic motors were developed and their advantages over traditional motors at small scales. It then covers key topics such as piezoelectricity, poling, basic principles of operation, construction, types including standing wave and traveling wave motors, driver circuits, control techniques, applications, and advantages/disadvantages. In summary, the document provides an overview of ultrasonic motors, how they work using piezoelectric effects, their construction and operating principles, examples of different types, and their applications and benefits.
New Microsoft Word Document
This document is a report on protecting an alternator from various faults. It discusses faults like unbalanced loading, stator winding faults, inter-turn faults, and protection methods like differential protection and its modifications. It also covers protection from earth faults, overspeed, overcurrent, overvoltage, failure of the field and prime mover. Diagrams are included to explain the protection principles and connections. The report provides a comprehensive overview of alternator faults and protection techniques.
Loss of excitation
The document discusses excitation in generators and loss of excitation (LOE). It begins by explaining what excitation is, why it is required, and how it is provided in generators of different sizes. It then discusses what will happen if excitation is lost, including potential overspeeding, abnormal heating, and loss of synchronization. Several protection schemes for LOE are presented, including impedance-based R-X schemes which monitor changes in generator terminal impedance during LOE. Settings for typical LOE relays are also calculated and described.
EXCITATION SYSTEMS
Functions and Performance Requirements
Elements of an Excitation System
Types of Excitation Systems
Control and Protection Functions
Modeling of Excitation Systems
The functions of an excitation system are
to provide direct current to the synchronous generator field winding, and
to perform control and protective functions essential to the satisfactory operation of the power system
The performance requirements of the excitation system are determined by
Generator considerations:
supply and adjust field current as the generator output varies within its continuous capability
respond to transient disturbances with field forcing consistent with the generator short term capabilities:
rotor insulation failure due to high field voltage
rotor heating due to high field current
stator heating due to high VAR loading
heating due to excess flux (volts/Hz)
Power system considerations:
contribute to effective control of system voltage and improvement of system stability
Vishwas jain
1. The document discusses various aspects of electric traction systems used for rail transport including power supply installation, overhead line equipment, and remote control systems.
2. It describes different types of traction systems including DC traction, AC traction, and multi-system electric traction.
3. The advantages of electric traction systems are highlighted such as cleanliness, low maintenance costs, high starting torque and acceleration.
Excitation3
This document provides an overview of excitation system models for synchronous generators and different approaches to regulating these systems. It discusses:
1) Nineteen excitation system models classified into three groups: direct current, alternator supplied rectifier, and static excitation systems.
2) Traditional linear regulation methods like P, PI, and PID controllers that are effective for steady state but not dynamic operation.
3) Newly developed nonlinear regulation methods like neural networks, fuzzy logic control, and adaptive control that have potential to improve dynamic regulation but are more complex.
4) Key components of excitation systems and how they provide excitation current to regulate generator output values like voltage and reactive power.
EXCITATION SYSTEMS by Dr. Kundur Power Systems
The functions of an excitation system are
to provide direct current to the synchronous generator field winding, and
to perform control and protective functions essential to the satisfactory operation of the power system
The performance requirements of the excitation system are determined by
Generator considerations:
supply and adjust field current as the generator output varies within its continuous capability
respond to transient disturbances with field forcing consistent with the generator short term capabilities:
rotor insulation failure due to high field voltage
rotor heating due to high field current
stator heating due to high VAR loading
heating due to excess flux (volts/Hz)
Power system considerations:
contribute to effective control of system voltage and improvement of system stability
Machines
This document summarizes key information about synchronous generators (alternators) and three-phase induction motors. It explains that alternators generate AC voltage through a rotating magnetic field produced by a rotor, while induction motors operate using the interaction between the rotating magnetic field of the stator and the induced current in the rotor to generate torque. The document also provides details on the construction, working principles, advantages, and formulas for calculating speed and induced EMF for these common electrical machines.
Equipment protection
The document discusses protection of transformers, generators, and motors from various faults. It describes:
1) Types of faults that can occur in transformers, generators, and motors such as winding failures, overloads, and short circuits.
2) Protection devices used such as Buchholz relays, differential relays, overcurrent relays, and thermal overload relays. Settings must coordinate with equipment thermal limits.
3) Generator protection is complex due to large size and connections; methods include neutral grounding resistors, field suppression, and differential relays. Faults can damage windings if not cleared quickly.
Project of lpo 1512(narendra pal)
This document provides specifications for a Tata LPO 1512 truck, including details about the Cummins 6BTAA 5.9L diesel engine with 6 cylinders, fuel and air filters, 6-speed transmission, rear axle, brakes, frame, suspension, tires, fuel tank, electrical system, dimensions, and weights. The engine produces 99kW at 2200 rpm and 490 Nm of torque at 1400 rpm. The transmission has 6 forward gears and 1 reverse gear. The rear axle has a ratio of 50,857:1.
Troubleshooting, Maintenance and Protection of AC Electrical Motors and Drives
It is estimated that electrical drives and other rotating equipment consume about 50% of the total electrical energy consumed in the world today. The cost of maintaining electrical motors can be a significant amount in the budget item of manufacturing and mining industries. This workshop gives you a thorough understanding of electrical motor’s working, maintenance and failure modes and gives you the tools to maintain and troubleshoot electrical motors.
You will gain a fundamental understanding of the installation, operation and troubleshooting of electric motors. Typical applications of electric motors in mining, manufacturing, materials handling, process control are covered in detail. You will learn the basic steps in specifying, installing, wiring and commissioning motors. The concluding section of the workshop gives you the fundamental tools in troubleshooting motors confidently and effectively.
MORE INFORMATION: http://www.idc-online.com/content/troubleshooting-maintenance-protection-ac-electrical-motors-and-drives-13
Future with going to
This document discusses the future with going to construction in English. It explains that the future with going to is formed with the present form of the verb "to be" plus "going to" plus the base verb. It is used to express planned or intended future actions. Some examples given are "She is going to travel in three weeks" and "They are going to study tomorrow." The document also explains the difference between using "will" and "going to" to express the future. While "will" indicates uncertainty, "going to" expresses something planned in advance that is certain to occur. It provides examples of how each would be used in sentences.
Sortida museu terrassa
Apuesta presentació parla d'una sortida que vam fer amb l'escola a aquest museu. Esper-ho que us agradi!!!
More Related Content
What's hot
Seminar report on ultrasonic motor
This document provides an overview of ultrasonic motors. It discusses that ultrasonic motors use piezoelectric elements to generate ultrasonic vibrations that produce rotational or linear motion. The vibrations are amplified through resonance. Advantages over electromagnetic motors include high torque at low speeds, compact size, and insensitivity to magnetic fields. The document then describes various prototypes of linear and rotary ultrasonic motors and their design and modeling. It provides details on the operating principles and applications of ultrasonic motors.
Brushless excitation
The document describes a brushless generator system that uses a main exciter and pilot exciter to generate AC power from a rotating wheel. The main exciter rotor is powered by the permanent magnet generator and produces DC power that excites the generator stator to produce AC power at 50 Hz and 15.6 kV. The pilot exciter ensures stable voltage regulation of the main generator output.
Ultrasonic motor
Ultrasonic motors use piezoelectric materials to convert electrical energy into ultrasonic vibrations, generating motion through friction. They have a stator that transmits vibrations, a rotor that rotates, and a shaft that transfers the rotation. When voltage is applied, the piezoelectric ceramics in the stator vibrate and transmit the vibrations to the rotor through friction, inducing a traveling wave that creates torque to rotate the rotor. Ultrasonic motors offer advantages over conventional motors like high torque at low speeds, compact size, accuracy, and lack of electromagnetic interference. However, they require high-frequency power supplies and have lower durability. Major applications include cameras, hard drives, robots,
Three phase induction_motor(eee499.blogspot.com)
This document summarizes a graduation project on speed control of a three-phase induction motor using a pulse width modulation inverter. It contains chapters on the induction motor, PWM inverter design, and a practical drive circuit. The circuit uses a HEF-4752V PWM generation chip to generate sinusoidal PWM signals to control the inverter switches and thereby regulate motor speed. Diagrams of the motor equivalent circuit and torque-speed characteristics are provided to explain how speed can be varied by changing supply frequency or voltage. The document contains detailed circuit descriptions and explanations of motor and inverter operation.
Brushless DC Excitation Systems
This document is a project report on brushless excitation systems submitted to Jawaharlal Nehru Technological University. It was prepared by students Ravi, Sharmili, and Shravan under the guidance of S. Chandra Reddy of Bharat Heavy Electricals Limited. The report provides an overview of brushless excitation systems, which overcome issues with conventional brush gear systems and improve reliability. It describes the components, construction, cooling, metering and supervision of brushless excitation systems.
Alternatorexcitation
This document discusses the functions and components of excitation systems for synchronous generators. It provides definitions and examples of different types of excitation systems including DC, AC, static, and brushless systems. DC excitation systems used early DC generators as a power source but were large in size. AC excitation systems use alternators as the power source and rectifiers to convert AC to DC for the field windings. Static and brushless systems provide excitation through feedback without external DC sources. The document also includes diagrams of components like alternators, rectifiers, and regulators in excitation systems and mathematical models of the exciter field. It concludes that seminars on these topics help provide practical knowledge to understand generator operation.
Generator Voltage control
Synchronous generators have a rotor with windings that are excited by a rotating exciter. The exciter provides power to the rotor windings which generate a magnetic field. An automatic voltage regulator controls the generator output voltage by adjusting the field current using a thyristor circuit to bypass a portion of the excitation current. It compares the generator voltage to a setpoint and controls the thyristor firing pulses accordingly. In parallel operation, droop compensation equipment ensures uniform reactive power sharing by reducing the generator voltage linearly as reactive current increases.
Marelli Motori marine applications
Marelli Motori manufactures electric motor and generators for all marine applications where power is required. Our product applications include propulsion, thrusters, FI-FI system, auxiliaries, dredge pumps, winch and PTO-PTI system. Our machines are also suitable for shaft generators, hybrid machines, offshore, generators at variable speed and emergency applications.
Ultra sonic motor
This document discusses ultrasonic motors. It begins with an introduction describing how ultrasonic motors were developed and their advantages over traditional motors at small scales. It then covers key topics such as piezoelectricity, poling, basic principles of operation, construction, types including standing wave and traveling wave motors, driver circuits, control techniques, applications, and advantages/disadvantages. In summary, the document provides an overview of ultrasonic motors, how they work using piezoelectric effects, their construction and operating principles, examples of different types, and their applications and benefits.
New Microsoft Word Document
This document is a report on protecting an alternator from various faults. It discusses faults like unbalanced loading, stator winding faults, inter-turn faults, and protection methods like differential protection and its modifications. It also covers protection from earth faults, overspeed, overcurrent, overvoltage, failure of the field and prime mover. Diagrams are included to explain the protection principles and connections. The report provides a comprehensive overview of alternator faults and protection techniques.
Loss of excitation
The document discusses excitation in generators and loss of excitation (LOE). It begins by explaining what excitation is, why it is required, and how it is provided in generators of different sizes. It then discusses what will happen if excitation is lost, including potential overspeeding, abnormal heating, and loss of synchronization. Several protection schemes for LOE are presented, including impedance-based R-X schemes which monitor changes in generator terminal impedance during LOE. Settings for typical LOE relays are also calculated and described.
EXCITATION SYSTEMS
Functions and Performance Requirements
Elements of an Excitation System
Types of Excitation Systems
Control and Protection Functions
Modeling of Excitation Systems
The functions of an excitation system are
to provide direct current to the synchronous generator field winding, and
to perform control and protective functions essential to the satisfactory operation of the power system
The performance requirements of the excitation system are determined by
Generator considerations:
supply and adjust field current as the generator output varies within its continuous capability
respond to transient disturbances with field forcing consistent with the generator short term capabilities:
rotor insulation failure due to high field voltage
rotor heating due to high field current
stator heating due to high VAR loading
heating due to excess flux (volts/Hz)
Power system considerations:
contribute to effective control of system voltage and improvement of system stability
Vishwas jain
1. The document discusses various aspects of electric traction systems used for rail transport including power supply installation, overhead line equipment, and remote control systems.
2. It describes different types of traction systems including DC traction, AC traction, and multi-system electric traction.
3. The advantages of electric traction systems are highlighted such as cleanliness, low maintenance costs, high starting torque and acceleration.
Excitation3
This document provides an overview of excitation system models for synchronous generators and different approaches to regulating these systems. It discusses:
1) Nineteen excitation system models classified into three groups: direct current, alternator supplied rectifier, and static excitation systems.
2) Traditional linear regulation methods like P, PI, and PID controllers that are effective for steady state but not dynamic operation.
3) Newly developed nonlinear regulation methods like neural networks, fuzzy logic control, and adaptive control that have potential to improve dynamic regulation but are more complex.
4) Key components of excitation systems and how they provide excitation current to regulate generator output values like voltage and reactive power.
EXCITATION SYSTEMS by Dr. Kundur Power Systems
The functions of an excitation system are
to provide direct current to the synchronous generator field winding, and
to perform control and protective functions essential to the satisfactory operation of the power system
The performance requirements of the excitation system are determined by
Generator considerations:
supply and adjust field current as the generator output varies within its continuous capability
respond to transient disturbances with field forcing consistent with the generator short term capabilities:
rotor insulation failure due to high field voltage
rotor heating due to high field current
stator heating due to high VAR loading
heating due to excess flux (volts/Hz)
Power system considerations:
contribute to effective control of system voltage and improvement of system stability
Machines
This document summarizes key information about synchronous generators (alternators) and three-phase induction motors. It explains that alternators generate AC voltage through a rotating magnetic field produced by a rotor, while induction motors operate using the interaction between the rotating magnetic field of the stator and the induced current in the rotor to generate torque. The document also provides details on the construction, working principles, advantages, and formulas for calculating speed and induced EMF for these common electrical machines.
Equipment protection
The document discusses protection of transformers, generators, and motors from various faults. It describes:
1) Types of faults that can occur in transformers, generators, and motors such as winding failures, overloads, and short circuits.
2) Protection devices used such as Buchholz relays, differential relays, overcurrent relays, and thermal overload relays. Settings must coordinate with equipment thermal limits.
3) Generator protection is complex due to large size and connections; methods include neutral grounding resistors, field suppression, and differential relays. Faults can damage windings if not cleared quickly.
Project of lpo 1512(narendra pal)
This document provides specifications for a Tata LPO 1512 truck, including details about the Cummins 6BTAA 5.9L diesel engine with 6 cylinders, fuel and air filters, 6-speed transmission, rear axle, brakes, frame, suspension, tires, fuel tank, electrical system, dimensions, and weights. The engine produces 99kW at 2200 rpm and 490 Nm of torque at 1400 rpm. The transmission has 6 forward gears and 1 reverse gear. The rear axle has a ratio of 50,857:1.
Troubleshooting, Maintenance and Protection of AC Electrical Motors and Drives
It is estimated that electrical drives and other rotating equipment consume about 50% of the total electrical energy consumed in the world today. The cost of maintaining electrical motors can be a significant amount in the budget item of manufacturing and mining industries. This workshop gives you a thorough understanding of electrical motor’s working, maintenance and failure modes and gives you the tools to maintain and troubleshoot electrical motors.
You will gain a fundamental understanding of the installation, operation and troubleshooting of electric motors. Typical applications of electric motors in mining, manufacturing, materials handling, process control are covered in detail. You will learn the basic steps in specifying, installing, wiring and commissioning motors. The concluding section of the workshop gives you the fundamental tools in troubleshooting motors confidently and effectively.
MORE INFORMATION: http://www.idc-online.com/content/troubleshooting-maintenance-protection-ac-electrical-motors-and-drives-13
What's hot (19)
Troubleshooting, Maintenance and Protection of AC Electrical Motors and Drives
Troubleshooting, Maintenance and Protection of AC Electrical Motors and Drives
Viewers also liked
Future with going to
This document discusses the future with going to construction in English. It explains that the future with going to is formed with the present form of the verb "to be" plus "going to" plus the base verb. It is used to express planned or intended future actions. Some examples given are "She is going to travel in three weeks" and "They are going to study tomorrow." The document also explains the difference between using "will" and "going to" to express the future. While "will" indicates uncertainty, "going to" expresses something planned in advance that is certain to occur. It provides examples of how each would be used in sentences.
Sortida museu terrassa
Apuesta presentació parla d'una sortida que vam fer amb l'escola a aquest museu. Esper-ho que us agradi!!!
Exam sch.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Bask bladeintro290811
This document provides specifications for a portable LED light. It is 300mm long, powered by a 5W internal battery that can be charged via USB. It has an on/off button, charge indicator, and reset button. It is water resistant and comes with a wrist lanyard. Accessories include standard and large lamp stands, mini tripods, and magnetic claw grips. It is designed for uses like camping, cycling, hiking, outdoor parties, reading, projects, and emergencies.
Presentacion de las tics
Este documento describe las herramientas digitales y sus efectos en los centros escolares. Explica que las herramientas digitales son programas que se usan en computadoras y dispositivos para realizar actividades. Entre sus usos están la comunicación, el apoyo educativo y la diversión. Se clasifican según su función como redes sociales, edición multimedia, acortadores de URL y streaming. Su función principal es facilitar actividades y proveer información de calidad, aunque requieren cuidado para evitar virus y proteger la privacidad.
Uso de la tcnologia yazmin yalico 5to
Los teléfonos móviles se pueden usar para enviar mensajes de texto sencillos para concertar citas, así como para enviar informes importantes como parte de transacciones empresariales, y ofrecen muchas otras posibilidades gracias a la tecnología.
GeoGebra 3D: uma experiência de ensino com atividades exploratório-investigat...
Esse artigo apresenta um estudo sobre as contribuições do software GeoGebra 3D na visualização de conceitos geométricos intrínsecos aos sólidos geométricos mediante uma tarefa de cunho exploratório-investigativa realizada com alunos do 2º ano do Ensino Médio de uma escola de Além Paraíba-MG
Presentation on Negativity
1) This document discusses negativity, its causes, effects, and how to achieve mastery over negativity.
2) Common causes of negativity include fear, lack of motivation, and minimizing the positive. Negativity can lead to stress, depression, hypertension, and ADHD.
3) To overcome negativity, the document recommends engaging in good habits, getting to the root of problems, removing them, and starting anew with a positive mindset. The overall message is that negativity should not be allowed and a positive outlook on life is important.
24053838 desg-endocrino
Este documento trata sobre fisiología del sistema endocrino y enfermedades de la hipófis y el hipotálamo. Incluye preguntas y respuestas sobre temas como embriología del tiroides, metabolismo de la vitamina D, regulación neuroendocrina, efectos del cortisol, fisiopatología de la prolactina y diagnóstico de diabetes insípida.
Dealing with Hoax
Dokumen tersebut memberikan definisi hoax dan membedakannya dengan opini dan fakta. Hoax adalah pemalsuan kebenaran yang disebarkan untuk menipu orang lain. Dokumen ini juga menjelaskan penyebab maraknya hoax serta cara untuk mendeteksi kebenaran suatu informasi, seperti memeriksa sumber berita dan melakukan pencarian ulang informasi. Kemampuan untuk membedakan fakta dan hoax perlu ditingkatkan karena teknologi memud
Photoshop precentacion
Este documento presenta una introducción a Adobe Photoshop CS5, incluyendo una definición de Photoshop, detalles sobre las nuevas características en CS5 como mejoras en las herramientas de selección y deformación de posición libre, y instrucciones sobre cómo iniciar Photoshop, abrir y guardar imágenes, y trabajar con formatos de imagen y colores.
Економічний серфінг: на гребені хвилі глобальних трендів
Економічний серфінг: на гребені хвилі глобальних трендів
Вища політична школа
Роман Корнилюк, к.е.н.
Квітень 2016
Viewers also liked (14)
GeoGebra 3D: uma experiência de ensino com atividades exploratório-investigat...
GeoGebra 3D: uma experiência de ensino com atividades exploratório-investigat...
Економічний серфінг: на гребені хвилі глобальних трендів
Економічний серфінг: на гребені хвилі глобальних трендів
Similar to electric screw jack gear hoist raising lowering sluice gate of canal
Dc 24v motorized screw jack accurate positioning solar panel tracking system
Dc 24v motorized screw jack accurate positioning solar panel tracking systemJacton Electromechanical Co.,Ltd
Motorized screw jack accurate positioning solar panel tracking system, which is the ideal solutions of solar panel tracking system. Because motorized screw jack is equipped with self-locking acme screw, protective pipe, bellows boot, limit switches, swivel plate, swivel mounting base, electric motor and gear reducer. Which solves the problem that solar panel tracking system must be highly rugged and can withstand wind force and weather,function reliably,maintenance free for many years,safety self locking and accurate positioning tracking movement. If motorized screw jack with high accuracy ball screw, must be equipped with brake mechanism.Electric screw lift gate, hydro gates screw jacks, screw jack gate lift gearb...
Electric screw lift gate, hydro gates screw jacks, screw jack gate lift gearb...Jacton Electromechanical Co.,Ltd
electric screw lift gate, hydro gates screw jacks, screw jack gate lift gearbox,sluice gate screw jack,screw jack water gate positioner features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.Gate screw jack, hydraulic sluice gate actuators, sluice gate electric actuat...
Gate screw jack, hydraulic sluice gate actuators, sluice gate electric actuat...Jacton Electromechanical Co.,Ltd
gate screw jack, hydraulic sluice gate actuators, sluice gate electric actuator, linear actuator gate opener, sluice gate hoist features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.Sluice gate screw jack gearbox, gate lifting screw jack, sluice gate jack dou...
Sluice gate screw jack gearbox, gate lifting screw jack, sluice gate jack dou...Jacton Electromechanical Co.,Ltd
sluice gate screw jack gearbox, gate lifting screw jack, sluice gate jack double, gearbox and motor for gate, electric water lifting gate screw jack gear features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.Sluice gate jack with limit switches, sluice gate jacks, screw jack gearboxes...
Sluice gate jack with limit switches, sluice gate jacks, screw jack gearboxes...Jacton Electromechanical Co.,Ltd
sluice gate jack with limit switches, sluice gate jacks, screw jack gearboxes for raising and lowering sluice gates features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.Dam gate hoist, head gate hoist, electric gate gear, sluice gate lifting gear...
Dam gate hoist, head gate hoist, electric gate gear, sluice gate lifting gear...Jacton Electromechanical Co.,Ltd
dam gate hoist, head gate hoist, electric gate gear, sluice gate lifting gear, sluice gate jack, screw jack raising and lowering dampers features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.Worm gear screw jack for canal gate, motorized screw jack hoisting sluice gat...
Worm gear screw jack for canal gate, motorized screw jack hoisting sluice gat...Jacton Electromechanical Co.,Ltd
worm gear screw jack for canal gate, motorized screw jack hoisting sluice gates, gates with screw hoists, sluice gate screw jack motor operated features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.Screw hoist raising lowering sluice gate canal, screw jack lifting gate, jack...
Screw hoist raising lowering sluice gate canal, screw jack lifting gate, jack...Jacton Electromechanical Co.,Ltd
screw hoist raising lowering sluice gate canal, screw jack lifting gate, jack screw operated sluice gate, hand crank screw jack for gates features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.1 ton weight water barrier with the pressure is hoisted by double 20 ton worm...
1 ton weight water barrier with the pressure is hoisted by double 20 ton worm...Jacton Electromechanical Co.,Ltd
1 ton weight water barrier with the pressure is hoisted by double 20 ton worm gear screw jacks 3000 mm screw length in russiaWorm screw jack for solar trackers, solar tracking machine screw jack actuato...
Worm screw jack for solar trackers, solar tracking machine screw jack actuato...Jacton Electromechanical Co.,Ltd
Worm screw jack for solar trackers, solar tracking machine screw jack actuators, electric lightweight scew jacks solar tracking, self positioning solar panel jack regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.Solar panel adjustment jack, solar panel tracking using screw jacks, solar tr...
Solar panel adjustment jack, solar panel tracking using screw jacks, solar tr...Jacton Electromechanical Co.,Ltd
solar panel adjustment jack, solar panel tracking using screw jacks, solar tracker linear actuator, solar system screw drive, solar positioning system screw jack regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.Solar jacks type, solar panel positioning gears jack, solar tracker jack with...
Solar jacks type, solar panel positioning gears jack, solar tracker jack with...Jacton Electromechanical Co.,Ltd
solar jacks type, solar panel positioning gears jack, solar tracker jack with ball joint, uses of solar power screw jack, screw jack for solar panel tracking system mechanism regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.Solar tracking screw jack, ball screw jack applications solar panels, solar s...
Solar tracking screw jack, ball screw jack applications solar panels, solar s...Jacton Electromechanical Co.,Ltd
solar tracking screw jack, ball screw jack applications solar panels, solar screw jack, screw jack type solar tracker motor, solar jacks and actuators regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.Solar actuators and motorized jacks, solar tracking jacks and actuators, sola...
Solar actuators and motorized jacks, solar tracking jacks and actuators, sola...Jacton Electromechanical Co.,Ltd
solar actuators and motorized jacks, solar tracking jacks and actuators, solar tracking drive jacks, solar tracking drive actuators, self-locking powered actuators regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.Miniature worm gear acme mechanical jacks, micro miniature actuators, micro-m...
Miniature worm gear acme mechanical jacks, micro miniature actuators, micro-m...Jacton Electromechanical Co.,Ltd
1. The document discusses micro-miniature screw jacks that are among the smallest in the world, with lifting forces up to 2.5kN and travel lengths up to 300mm.
2. These screw jacks are used in beverage production lines for height adjustment and can washing, improving output and reducing downtime.
3. Jacton Electromechanical Co. is a Chinese manufacturer of precision screw jacks and lifting systems, serving customers globally across various industries.Mini manually operated screw driven jacks, lightweight screw jacks, light dut...
Mini manually operated screw driven jacks, lightweight screw jacks, light dut...Jacton Electromechanical Co.,Ltd
Mini manually operated screw driven jacks, lightweight screw jacks, light duty beveled screw jack,micro lifting jack suppliers and manufacturersMiniature screw jacks, miniature acme shafts jack, small worm gear jack screw...
Miniature screw jacks, miniature acme shafts jack, small worm gear jack screw...Jacton Electromechanical Co.,Ltd
Miniature screw jacks, miniature acme shafts jack, small worm gear jack screw actuators, high lead lightweight lifting screw jack suppliers, manufacturersSmall worm gear jack, acme miniature screw jack, miniature lifting jack screw...
Small worm gear jack, acme miniature screw jack, miniature lifting jack screw...Jacton Electromechanical Co.,Ltd
Small worm gear jack, acme miniature screw jack, miniature lifting jack screws,light weight machine screw actuators suppliers, manufacturersMiniature lifting screw jack, light duty screw jack rod, miniature screw jack...
Miniature lifting screw jack, light duty screw jack rod, miniature screw jack...Jacton Electromechanical Co.,Ltd
Miniature lifting screw jack, light duty screw jack rod, miniature screw jacks, gear worm jack mini, lightweight linear actuators suppliers, manufacturersMicro lifting mechanism, light duty screw jack, light weight miniature jacks,...
Micro lifting mechanism, light duty screw jack, light weight miniature jacks,...Jacton Electromechanical Co.,Ltd
Micro lifting mechanism, light duty screw jack, light weight miniature jacks, miniature worm gear machine screw jacks, mini actuators suppliers, manufacturersSimilar to electric screw jack gear hoist raising lowering sluice gate of canal (20)
Dc 24v motorized screw jack accurate positioning solar panel tracking system
Dc 24v motorized screw jack accurate positioning solar panel tracking system
Electric screw lift gate, hydro gates screw jacks, screw jack gate lift gearb...
Electric screw lift gate, hydro gates screw jacks, screw jack gate lift gearb...
Gate screw jack, hydraulic sluice gate actuators, sluice gate electric actuat...
Gate screw jack, hydraulic sluice gate actuators, sluice gate electric actuat...
Sluice gate screw jack gearbox, gate lifting screw jack, sluice gate jack dou...
Sluice gate screw jack gearbox, gate lifting screw jack, sluice gate jack dou...
Sluice gate jack with limit switches, sluice gate jacks, screw jack gearboxes...
Sluice gate jack with limit switches, sluice gate jacks, screw jack gearboxes...
Dam gate hoist, head gate hoist, electric gate gear, sluice gate lifting gear...
Dam gate hoist, head gate hoist, electric gate gear, sluice gate lifting gear...
Worm gear screw jack for canal gate, motorized screw jack hoisting sluice gat...
Worm gear screw jack for canal gate, motorized screw jack hoisting sluice gat...
Screw hoist raising lowering sluice gate canal, screw jack lifting gate, jack...
Screw hoist raising lowering sluice gate canal, screw jack lifting gate, jack...
1 ton weight water barrier with the pressure is hoisted by double 20 ton worm...
1 ton weight water barrier with the pressure is hoisted by double 20 ton worm...
Worm screw jack for solar trackers, solar tracking machine screw jack actuato...
Worm screw jack for solar trackers, solar tracking machine screw jack actuato...
Solar panel adjustment jack, solar panel tracking using screw jacks, solar tr...
Solar panel adjustment jack, solar panel tracking using screw jacks, solar tr...
Solar jacks type, solar panel positioning gears jack, solar tracker jack with...
Solar jacks type, solar panel positioning gears jack, solar tracker jack with...
Solar tracking screw jack, ball screw jack applications solar panels, solar s...
Solar tracking screw jack, ball screw jack applications solar panels, solar s...
Solar actuators and motorized jacks, solar tracking jacks and actuators, sola...
Solar actuators and motorized jacks, solar tracking jacks and actuators, sola...
Miniature worm gear acme mechanical jacks, micro miniature actuators, micro-m...
Miniature worm gear acme mechanical jacks, micro miniature actuators, micro-m...
Mini manually operated screw driven jacks, lightweight screw jacks, light dut...
Mini manually operated screw driven jacks, lightweight screw jacks, light dut...
Miniature screw jacks, miniature acme shafts jack, small worm gear jack screw...
Miniature screw jacks, miniature acme shafts jack, small worm gear jack screw...
Small worm gear jack, acme miniature screw jack, miniature lifting jack screw...
Small worm gear jack, acme miniature screw jack, miniature lifting jack screw...
Miniature lifting screw jack, light duty screw jack rod, miniature screw jack...
Miniature lifting screw jack, light duty screw jack rod, miniature screw jack...
Micro lifting mechanism, light duty screw jack, light weight miniature jacks,...
Micro lifting mechanism, light duty screw jack, light weight miniature jacks,...
More from Jacton Electromechanical Co.,Ltd
2014 new catalogue jtw-series machine screw jack,machine screw jack worm gear...
2014 new catalogue jtw-series machine screw jack,machine screw jack worm gear...Jacton Electromechanical Co.,Ltd
The document describes the JTW-Series machine screw jacks. Key points:
- The jacks use heat-treated steel and bronze gears to translate rotation into linear movement via an acme thread lifting screw. Ball bearings and seals support components.
- Configurations include types that translate, rotate the lifting nut, include anti-rotation/backlash features, and different lifting screw ends. Capacities range from 0.5 to 100 tons.
- JTW jacks are self-locking, precisely position loads, and do not require additional braking. They can be driven manually or by motor in various mounting positions.
- Applications include metalworking, mining, construction, and other industries2014 new catalogue jtv-series miter gearbox,assembly 90 gear box,90 degree be...
2014 new catalogue jtv-series miter gearbox,assembly 90 gear box,90 degree be...Jacton Electromechanical Co.,Ltd
This document provides specifications for the JTV-series miter gearbox. The gearbox has a cubic, machined housing with average efficiencies of 95-98%. It can operate in both directions smoothly with low noise and vibration. Spiral bevel gears are made of hardened alloy steel and precision processed to provide rigidity and high precision transmission. The gearbox is available in various configurations with 1-4 shafts and maximum torques ranging from 19Nm to 1841Nm.2014 new catalogue jt-series miter gearboxes,t series 3 axes gear boxes,1 1 r...
2014 new catalogue jt-series miter gearboxes,t series 3 axes gear boxes,1 1 r...Jacton Electromechanical Co.,Ltd
Jacton Industry Co., Ltd is a company that provides lifting systems solutions including screw jacks, miter gearboxes, and lifting systems. They can be contacted via their phone number, Skype, email, or website for inquiries about custom screw jacks, custom acme screws, or their JT-Series miter gearbox product line.2014 new catalogue jt-series acme screw jack,worm gear for acme screw,acme wo...
2014 new catalogue jt-series acme screw jack,worm gear for acme screw,acme wo...Jacton Electromechanical Co.,Ltd
The JT-Series Acme Screw Jacks incorporate heat-treated steel and bronze gears to translate or rotate an acme threaded lifting screw, supporting loads without backdriving. They are available in sizes from 0.5 to 100 tons and various configurations, and can lift at speeds up to 3 m/min. JT-Series jacks are commonly used for controlled lifting, lowering, pushing and pulling in applications like steel mill roller adjustment. They are generally maintenance-free and accessories allow for electric, hand wheel, or combined motor operation.2014 new catalogue cubicle gearbox screw jacks,screw jacks with cubic housing...
2014 new catalogue cubicle gearbox screw jacks,screw jacks with cubic housing...Jacton Electromechanical Co.,Ltd
The document describes the JTC-Series Cubic Screw Jack. It has a worm gear driven trapezoidal lead screw that incorporates a heat-treated steel worm and bronze worm gear. It uses ball bearings and seals to support components. The jack housing is made of ductile iron and comes in various configurations for different applications. It can provide lifting forces from 2.5 to 500 kN and linear speeds up to 1.5 m/min. Accessories include motors, wheels, and switches. It is used for applications requiring controlled lifting/lowering such as conveyors and stages.2014 new catalogue worm gear ball screw jacks,electric ball screw lifting jac...
2014 new catalogue worm gear ball screw jacks,electric ball screw lifting jac...Jacton Electromechanical Co.,Ltd
The document describes JTB-Series Ball Screw Jacks, which use ball screws and ball nuts instead of machine screws to reduce torque requirements. They have worm gears that drive bronze gear sets and ball nuts to translate or rotate lifting ball screws. The ball screw design allows for smoother and more efficient lifting than machine screw jacks. JTB ball screw jacks are used where controlled lifting is required and can be installed as single units or in lifting systems. They come in various configurations for different applications.1 ton solar actuators and motorized jacks, 5 ton solar tracking jacks and act...
1 ton solar actuators and motorized jacks, 5 ton solar tracking jacks and act...Jacton Electromechanical Co.,Ltd
we are professional 1 ton solar actuators and motorized jacks, 5 ton solar tracking jacks and actuators, 10 ton solar tracking drive jacks, 20 ton solar tracking drive actuators for solar panel tracker system in canada manufacturers and suppliers in China.Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm ...
Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm ...Jacton Electromechanical Co.,Ltd
we are professional Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm for nc precision slitting production line automatic slitter machine in australia manufacturers and suppliers in China.Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm ...
Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm ...Jacton Electromechanical Co.,Ltd
The document describes 3 ton worm gear screw jacks lifting devices that are 300mm in travel stroke and have a maximum load capacity of 3 tons. The screw jacks are hand wheel operated and are being offered for use in NC precision slitting production lines and automatic slitter machines in Australia. The screw jacks have a high gear ratio of 1/6 and include additional protective piping.2.5kn, 5kn, 10kn lightweight micro miniature screw jacks for aluminium can pr...
2.5kn, 5kn, 10kn lightweight micro miniature screw jacks for aluminium can pr...Jacton Electromechanical Co.,Ltd
The document advertises lightweight micro-miniature screw jacks from 2.5kn to 10kn lifting force for aluminum can production lines in the UK. It provides details on 4 screw jack models ranging from 2.5kn to 10kn lifting force that are inverted type, have a traveling screw configuration, 100mm lift height, and protective tubing. The screw jacks and other products like gear boxes, couplings, motors, and accessories are suitable for applications that require height adjustment and lifting on conveyor lines.1 ton, 2 ton, 3 ton, 5 ton, 10 ton precision gear lifts worm gear drive, prec...
1 ton, 2 ton, 3 ton, 5 ton, 10 ton precision gear lifts worm gear drive, prec...Jacton Electromechanical Co.,Ltd
Jacton Electromechanical Co. produces precision screw jacks and gear lifts for precision straighteners used in the USA. They offer inverted translating worm gear screw jacks in various tonnage ratings from 1 to 10 tons with stroke lengths from 80 to 300mm. These screw jacks feature customized threaded ends, double input shaft worms, and protective tubes to prevent rust. Jacton also produces other screw jack and gear products for industrial machinery.5 ton upright traveling nut machine screw jack, 5t load acme nut screw jack f...
5 ton upright traveling nut machine screw jack, 5t load acme nut screw jack f...Jacton Electromechanical Co.,Ltd
we are professional 5 ton upright traveling nut machine screw jack, 5t load acme nut screw jack for tunnel freezer top lid lifting in food processing lines in united kingdom manufacturers and suppliers in China.Self locking jack screw driven scissor mechanism, worm gear screw jack style ...
Self locking jack screw driven scissor mechanism, worm gear screw jack style ...Jacton Electromechanical Co.,Ltd
we are professional Self locking jack screw driven scissor mechanism, worm gear screw jack style scissor lift system, acme screw jack lifting system for scissor lift table in singapore manufacturers and suppliers in China.Self locking jack screw driven scissor mechanism, worm gear screw jack style ...
Self locking jack screw driven scissor mechanism, worm gear screw jack style ...Jacton Electromechanical Co.,Ltd
The document discusses screw jack lifting systems for scissor lift tables. It describes how ball screw or acme screw jack lifting systems can provide self-locking, precise positioning, uniform lifting speed, synchronization, easy installation and maintenance for scissor lifts. It then provides details about a specific order from a Singapore customer for a screw jack scissor lift table with two screw jacks driven by a 3-phase motor.25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...
25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...Jacton Electromechanical Co.,Ltd
we are professional 25kn load capacity machine screw jacks 300mm stroke for continuous pu panel production lines in thailand manufacturers and suppliers in China.25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...
25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...Jacton Electromechanical Co.,Ltd
The document describes 25kn load capacity machine screw jacks with 300mm stroke that are used in continuous sandwich panel laminating machines for raising and lowering caterpillar plates. It provides details on two models, the JTW-2.5T-IS-300-H-III-C-PP and JTC25-IS-500-H-I-C-PP, which have load capacities of 2.5 tons and 25kN respectively. It also includes links to the company's website pages on various screw jack products and related parts.5 ton theatre lifting stage jack, 10 ton acme screws stage and theatre lifts,...
5 ton theatre lifting stage jack, 10 ton acme screws stage and theatre lifts,...Jacton Electromechanical Co.,Ltd
The document discusses a theatre lifting stage jack system for a theatre in France. It includes specifications for a lifting platform that is 15000x10000mm carrying a total load of 2400kN. The system would include 6 screw jacks each with a load capacity of 400kN and 628mm of travel, along with 3 miter gearboxes to connect the screw jacks. An electric motor with a gear reducer is also specified to drive the screw jack system at a speed of 37.5mm/min. Parts for the system like screw jacks, couplings, linking bars, bearings, motors and gearboxes are also referenced.5 ton machine screw jacks, 20 ton upright translating screw jacks for lift di...
5 ton machine screw jacks, 20 ton upright translating screw jacks for lift di...Jacton Electromechanical Co.,Ltd
5 Ton Machine Screw Jacks, 20 Ton Upright Translating Screw Jacks For Lift Different Rotors Of Horizontal Axis Balancing Machines In Russia
This balancing machine is a dynamic soft bearing machine with a horizontal axis.
It has an AC motor with variable speed, which drives the balancing machine through a belt drive system.
The machine can be mounted on a reinforced concrete basement or rigid table for better operating conditions. Self-installing rollers, ac frequency inverter, 5t or 20t screw jacks for for smooth and non-shock rotor stop.
20 Ton Upright Translating Screw Jacks
Model: JT-20T-US-350-L-I-C-N
* Static loading capacity max. 20t, spindle tr64x8
* Upright mounting, translating screw configuration
* Travel stroke 350 mm
* Low worm gear ratio 1/32, 0.25mm per revolution of input shaft
* Double input shaft, no additional accessory
5 Ton Upright Translating Screw Jacks
Model: JT-5T-US-300-L-I-C-N
* Static loading capacity max. 5t, spindle tr38x6
* Upright mounting, translating screw configuration
* Travel stroke 300 mm
* Low worm gear ratio 1/24, 0.25mm per revolution of input shaft
* Double input shaft, no additional accessory5 ton machine screw jacks, 20 ton upright translating screw jacks for lift di...
5 ton machine screw jacks, 20 ton upright translating screw jacks for lift di...Jacton Electromechanical Co.,Ltd
Jacton Electromechanical Co.,Ltd produces 5 ton and 20 ton upright translating screw jacks for lifting different rotors on horizontal axis balancing machines in Russia. The balancing machine has an AC motor with variable speed that drives the machine through a belt system. It can be mounted on a concrete base or table. The screw jacks provide smooth, non-shock stopping of rotors and include features like travel stroke, worm gear ratio, and double input shafts. Other products include various screw jack models, gear boxes, hand wheels, motors, and accessories.Dc 24 v geared motor screw jack actuator hoisting water gates in agricultural...
Dc 24 v geared motor screw jack actuator hoisting water gates in agricultural...Jacton Electromechanical Co.,Ltd
The document discusses a DC 24V geared motor screw jack actuator used for hoisting water gates in agricultural industry in Malaysia. The screw jack has a 10 ton load capacity, 7 foot stroke length, and is powered by a 24V DC motor with a 1/4 gear reduction ratio. It includes protective tubing, bellows boots, and limit switches. The company, Jacton Electromechanical Co., also produces other screw jacks and gearboxes.More from Jacton Electromechanical Co.,Ltd (20)
2014 new catalogue jtw-series machine screw jack,machine screw jack worm gear...
2014 new catalogue jtw-series machine screw jack,machine screw jack worm gear...
2014 new catalogue jtv-series miter gearbox,assembly 90 gear box,90 degree be...
2014 new catalogue jtv-series miter gearbox,assembly 90 gear box,90 degree be...
2014 new catalogue jt-series miter gearboxes,t series 3 axes gear boxes,1 1 r...
2014 new catalogue jt-series miter gearboxes,t series 3 axes gear boxes,1 1 r...
2014 new catalogue jt-series acme screw jack,worm gear for acme screw,acme wo...
2014 new catalogue jt-series acme screw jack,worm gear for acme screw,acme wo...
2014 new catalogue cubicle gearbox screw jacks,screw jacks with cubic housing...
2014 new catalogue cubicle gearbox screw jacks,screw jacks with cubic housing...
2014 new catalogue worm gear ball screw jacks,electric ball screw lifting jac...
2014 new catalogue worm gear ball screw jacks,electric ball screw lifting jac...
1 ton solar actuators and motorized jacks, 5 ton solar tracking jacks and act...
1 ton solar actuators and motorized jacks, 5 ton solar tracking jacks and act...
Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm ...
Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm ...
Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm ...
Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm ...
2.5kn, 5kn, 10kn lightweight micro miniature screw jacks for aluminium can pr...
2.5kn, 5kn, 10kn lightweight micro miniature screw jacks for aluminium can pr...
1 ton, 2 ton, 3 ton, 5 ton, 10 ton precision gear lifts worm gear drive, prec...
1 ton, 2 ton, 3 ton, 5 ton, 10 ton precision gear lifts worm gear drive, prec...
5 ton upright traveling nut machine screw jack, 5t load acme nut screw jack f...
5 ton upright traveling nut machine screw jack, 5t load acme nut screw jack f...
Self locking jack screw driven scissor mechanism, worm gear screw jack style ...
Self locking jack screw driven scissor mechanism, worm gear screw jack style ...
Self locking jack screw driven scissor mechanism, worm gear screw jack style ...
Self locking jack screw driven scissor mechanism, worm gear screw jack style ...
25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...
25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...
25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...
25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...
5 ton theatre lifting stage jack, 10 ton acme screws stage and theatre lifts,...
5 ton theatre lifting stage jack, 10 ton acme screws stage and theatre lifts,...
5 ton machine screw jacks, 20 ton upright translating screw jacks for lift di...
5 ton machine screw jacks, 20 ton upright translating screw jacks for lift di...
5 ton machine screw jacks, 20 ton upright translating screw jacks for lift di...
5 ton machine screw jacks, 20 ton upright translating screw jacks for lift di...
Dc 24 v geared motor screw jack actuator hoisting water gates in agricultural...
Dc 24 v geared motor screw jack actuator hoisting water gates in agricultural...
Recently uploaded
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
Leaders who possess self-awareness deeply understand their emotions, strengths, and weaknesses.
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSDearbornMusic-KatherineJasperFullSailUni
My powerpoint presentation for my Music Retail and Distribution class at Full Sail University
The latest Heat Pump Manual from Newentide
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambarHow MJ Global Leads the Packaging Industry.pdf
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
2022 Vintage Roman Numerals Men Rings
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Call8328958814 satta matka Kalyan result satta guessing
Satta Matka Kalyan Main Mumbai Fastest Results
Satta Matka ❋ Sattamatka ❋ New Mumbai Ratan Satta Matka ❋ Fast Matka ❋ Milan Market ❋ Kalyan Matka Results ❋ Satta Game ❋ Matka Game ❋ Satta Matka ❋ Kalyan Satta Matka ❋ Mumbai Main ❋ Online Matka Results ❋ Satta Matka Tips ❋ Milan Chart ❋ Satta Matka Boss❋ New Star Day ❋ Satta King ❋ Live Satta Matka Results ❋ Satta Matka Company ❋ Indian Matka ❋ Satta Matka 143❋ Kalyan Night Matka..
Business storytelling: key ingredients to a story
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
Profiles of Iconic Fashion Personalities.pdf
The fashion industry is dynamic and ever-changing, continuously sculpted by trailblazing visionaries who challenge norms and redefine beauty. This document delves into the profiles of some of the most iconic fashion personalities whose impact has left a lasting impression on the industry. From timeless designers to modern-day influencers, each individual has uniquely woven their thread into the rich fabric of fashion history, contributing to its ongoing evolution.
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
The Steadfast and Reliable Bull: Taurus Zodiac Sign
Explore the steadfast and reliable nature of the Taurus Zodiac Sign. Discover the personality traits, key dates, and horoscope insights that define the determined and practical Taurus, and learn how their grounded nature makes them the anchor of the zodiac.
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & InnovationOperational Excellence Consulting
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentationsThe Genesis of BriansClub.cm Famous Dark WEb Platform
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
Recently uploaded (20)
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Call8328958814 satta matka Kalyan result satta guessing
Call8328958814 satta matka Kalyan result satta guessing
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Registered-Establishment-List-in-Uttarakhand-pdf.pdf
Registered-Establishment-List-in-Uttarakhand-pdf.pdf
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
The Steadfast and Reliable Bull: Taurus Zodiac Sign
The Steadfast and Reliable Bull: Taurus Zodiac Sign
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & Innovation
The Genesis of BriansClub.cm Famous Dark WEb Platform
The Genesis of BriansClub.cm Famous Dark WEb Platform
electric screw jack gear hoist raising lowering sluice gate of canal
- 1. electric screw jack gear hoist raising lowering sluice gate of canal electric screw jack gear hoist is widely used for raising lowering sluice gate of canal (inlet gate, intake gate, flushing gate, outlet gate) in modernization hydropower station or hydro-projects, which uses electric motor driven instead of human power manual operation. Selecting electric screw jack gear hoist following sluice gate sizes, weight, required travel speed etc. Russia Water Conservancy Project electric screw jack gear hoist for canal sluice gate models: 1. JTW-50T-IS-5000-L-II-M4-PP/EM/GR/LS. Spindle lifting screw sizes Tr120x20, 50ton maximum tension lifting force, inverted mounting worm screw jack, translating screw configuration, long travel length 5000mm, low gear ratio 32:1, clevis end fitting, right side motor flange adapter with worm shaft, protective pipe, 3-phase electric motor, right angle double 15:1 ratio flange mounted worm gear reducer and limit switches, low travel speed with worm gear reducer about 62.5mm/min. 2. JTW-35T-IS-4000-L-II-M4-PP/EM/GR/LS. Spindle lifting screw sizes Tr100x18, 35ton maximum tension lifting force, inverted mounting worm screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 32:1, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. low travel speed about 81.6mm/min. 3. JTW-25T-IS-3500-L-II-M4-PP/EM/GR/LS. Spindle lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting worm screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 32:1, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. low travel speed about 75mm/min. 4. JTW-20T-IS-3000-L-II-M4-PP/EM/GR/LS. Spindle lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting worm screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 24:1, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. low travel speed about 75mm/min. Website: http://www.screw-jack.com/info/Application-Sluice-Gate-Lifting-And-Lowering.html Email: sales@screw-jack.com Company: Jacton Electromechanical Co.,Ltd Tel: 86-769-81585852 Fax: 86-769-8162095 Contact: Mr Warren Lee (86-13532830851) Skype: jactonjack
- 2. Website: http://www.screw-jack.com/info/Application-Sluice-Gate-Lifting-And-Lowering.html Email: sales@screw-jack.com Company: Jacton Electromechanical Co.,Ltd Tel: 86-769-81585852 Fax: 86-769-8162095 Contact: Mr Warren Lee (86-13532830851) Skype: jactonjack