Jtc50 worm gear screw lifter,5t screw actuator worm gear, 5 t linear worm drive jack,50 kn fabricated worm screw jack,5 ton screw worm gearbox,5 tonnes worm wheel screw drive lift,5000kg worm screw lift static load capacity 50 kn, high speed torque 31 n.m, low speed torque 9.7 n.m. lead screw (spindle) Tr40x7. high speed gear ratio 1/7, low speed gear ratio 1/28. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 2000 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jtc100 worm gear screw lifter,10t screw jack worm gear unit,10 ton worm gear screw lift,10 tonnes long stroke worm gear screw jack,100 kn worm gear wheel lifts,10000kg worm gear screw jack for lifting static load capacity 100 kn, high speed torque 67 n.m, low speed torque 21.5 n.m. lead screw (spindle) Tr55x9. high speed gear ratio 1/9, low speed gear ratio 1/36. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 2500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 0.5 t travelling nut screw jack shaft, 0.5 ton jack screw length,500 kg synchronized screw jack,5kn screw jack roller bearings,1000lb screw jack housing casting static lifting force 500 kg, dynamic lifting force 300 kg. lifting screw (spindle) Tr20x5. high speed gear ratio 1/5, medium speed gear ratio 1/10, low speed gear ratio 1/20. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 100 mm stroke without guidances, 200 mm stroke with guidances. when tension load, 700 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jtc50 worm gear screw lifter,5t screw actuator worm gear, 5 t linear worm drive jack,50 kn fabricated worm screw jack,5 ton screw worm gearbox,5 tonnes worm wheel screw drive lift,5000kg worm screw lift static load capacity 50 kn, high speed torque 31 n.m, low speed torque 9.7 n.m. lead screw (spindle) Tr40x7. high speed gear ratio 1/7, low speed gear ratio 1/28. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 2000 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jtc100 worm gear screw lifter,10t screw jack worm gear unit,10 ton worm gear screw lift,10 tonnes long stroke worm gear screw jack,100 kn worm gear wheel lifts,10000kg worm gear screw jack for lifting static load capacity 100 kn, high speed torque 67 n.m, low speed torque 21.5 n.m. lead screw (spindle) Tr55x9. high speed gear ratio 1/9, low speed gear ratio 1/36. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 2500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 0.5 t travelling nut screw jack shaft, 0.5 ton jack screw length,500 kg synchronized screw jack,5kn screw jack roller bearings,1000lb screw jack housing casting static lifting force 500 kg, dynamic lifting force 300 kg. lifting screw (spindle) Tr20x5. high speed gear ratio 1/5, medium speed gear ratio 1/10, low speed gear ratio 1/20. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 100 mm stroke without guidances, 200 mm stroke with guidances. when tension load, 700 mm stroke. single screw jack or multiple screw jacks system arrangements.
miniature screw jack,micro worm gear screw jack,small lifting screw jacks,mini linear screw drive actuator,light duty screw lift,light weight screw jack gear reducer,light load mechanical actuators features:
1. Lifting Force 2.5kN. Under max. lifting force, drive torque high speed 1.2Nm, low speed 0.4Nm.
2. Acme screw diameter 16 mm, pitch 4 mm.
3. High gear ratio 1/4, low gear ratio 1/16.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 300mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end and threaded end.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON MULI 0 mini screw jack, Germany INKOMA HSG-0 mini screw jack, PFAFF MERKUR M0 mini screw jack, GROB MJ0 mini screw jack, Australia ZIMM GSZ-2-S/R mini screw jack and Switzerland NOZAG NSE 2-SN/SL mini screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
JTC10 10KN lifting lowering screw jack,1000 kg cubical gearbox screw jack up and down,1 ton worm gear screw jack open close features:
1. Lifting Force 10kN. Under max. lifting force, drive torque high speed 5.6Nm, low speed 1.83Nm.
2. Acme screw diameter 20 mm, pitch 4 mm.
3. High gear ratio 1/4, low gear ratio 1/16.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 600mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON MULI 2 cubic screw jack, Germany INKOMA HSG-2 cubic screw jack, PFAFF MERKUR M2 cubic screw jack, GROB MJ2 cubic screw jack, Australia ZIMM Z-10-S/R or GSZ-10-S/R cubic screw jack and Switzerland NOZAG NSE 10-SN/SL cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
Jtc5 worm gear screw lifter,small mechanical worm gear screw jacks, stainless steel worm gear screw jack,small worm geared screw jack,small industrial worm screw jacks,lifting worm gear jack, jack worm screw static load capacity 5 kn, high speed torque 2.6 n.m, low speed torque 0.8 n.m. lead screw (spindle) Tr18x4. high speed gear ratio 1/4, low speed gear ratio 1/16. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 400 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jtc500 worm gear screw lifter,2 inches stroke machine screw jacks,50t jack screw arrangement,50 ton screw jack lift,500 kn gear lift, screw jack vertical arrangement,50 tonnes acme screw adjuster mechanism static load capacity 500 kn, high speed torque 442 n.m, low speed torque 148 n.m. lead screw (spindle) Tr120x14. high speed gear ratio 1/14, low speed gear ratio 1/56. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 5500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jtc25 worm gear screw lifter,2.5 ton worm and screw gear lift,2.5 tonnes self locking of worm gears drive,25 kn precision worm wheel screw jack,5000lbs worm gear screw jack mechanism,screw actuator worm gear static load capacity 25 kn, high speed torque 13.9 n.m, low speed torque 4.5 n.m. lead screw (spindle) Tr30x6. high speed gear ratio 1/6, low speed gear ratio 1/24. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 1500 mm stroke. single screw jack or multiple screw jacks system arrangements.
250kn worm gear screw jack,jtc250 25 ton heavy load screw jack,25 tonnes high capacity machine screw actuators features:
1. Lifting Force 250kN. Under max. lifting force, drive torque high speed 200.36Nm, low speed 67.32Nm.
2. Acme screw diameter 80 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 3500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 3 cubic screw jack, Germany PFAFF MERKUR M6 cubic screw jack and GROB BJ3 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
solar tracking screw jack, ball screw jack applications solar panels, solar screw jack, screw jack type solar tracker motor, solar jacks and actuators regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
solar actuators and motorized jacks, solar tracking jacks and actuators, solar tracking drive jacks, solar tracking drive actuators, self-locking powered actuators regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
solar jacks type, solar panel positioning gears jack, solar tracker jack with ball joint, uses of solar power screw jack, screw jack for solar panel tracking system mechanism regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Worm screw jack for solar trackers, solar tracking machine screw jack actuators, electric lightweight scew jacks solar tracking, self positioning solar panel jack regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
solar panel adjustment jack, solar panel tracking using screw jacks, solar tracker linear actuator, solar system screw drive, solar positioning system screw jack regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Jtc200 worm gear screw lifter,20000kg rotating screw jack,20ton travelling nut screw jack,20 t 4 ft worm gear lift jack,200 kn worm screw lift assembly,20 tonnes cubical gearbox screw jack static load capacity 200 kn, high speed torque 146 n.m, low speed torque 48 n.m. lead screw (spindle) Tr70x10. high speed gear ratio 1/10, low speed gear ratio 1/40. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 3000 mm stroke. single screw jack or multiple screw jacks system arrangements.
35 ton lifting jack,jtc350 350kn worm gear screw jack,high lift mechanical gear jack,long stroke linear screw drive actuator features:
1. Lifting Force 350kN. Under max. lifting force, drive torque high speed 325.51Nm, low speed 107.46Nm.
2. Acme screw diameter 100 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 4500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 4 cubic screw jack, Germany PFAFF MERKUR M7 cubic screw jack and GROB BJ4 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
miniature screw jack,micro worm gear screw jack,small lifting screw jacks,mini linear screw drive actuator,light duty screw lift,light weight screw jack gear reducer,light load mechanical actuators features:
1. Lifting Force 2.5kN. Under max. lifting force, drive torque high speed 1.2Nm, low speed 0.4Nm.
2. Acme screw diameter 16 mm, pitch 4 mm.
3. High gear ratio 1/4, low gear ratio 1/16.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 300mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end and threaded end.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON MULI 0 mini screw jack, Germany INKOMA HSG-0 mini screw jack, PFAFF MERKUR M0 mini screw jack, GROB MJ0 mini screw jack, Australia ZIMM GSZ-2-S/R mini screw jack and Switzerland NOZAG NSE 2-SN/SL mini screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
JTC10 10KN lifting lowering screw jack,1000 kg cubical gearbox screw jack up and down,1 ton worm gear screw jack open close features:
1. Lifting Force 10kN. Under max. lifting force, drive torque high speed 5.6Nm, low speed 1.83Nm.
2. Acme screw diameter 20 mm, pitch 4 mm.
3. High gear ratio 1/4, low gear ratio 1/16.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 600mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON MULI 2 cubic screw jack, Germany INKOMA HSG-2 cubic screw jack, PFAFF MERKUR M2 cubic screw jack, GROB MJ2 cubic screw jack, Australia ZIMM Z-10-S/R or GSZ-10-S/R cubic screw jack and Switzerland NOZAG NSE 10-SN/SL cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
Jtc5 worm gear screw lifter,small mechanical worm gear screw jacks, stainless steel worm gear screw jack,small worm geared screw jack,small industrial worm screw jacks,lifting worm gear jack, jack worm screw static load capacity 5 kn, high speed torque 2.6 n.m, low speed torque 0.8 n.m. lead screw (spindle) Tr18x4. high speed gear ratio 1/4, low speed gear ratio 1/16. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 400 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jtc500 worm gear screw lifter,2 inches stroke machine screw jacks,50t jack screw arrangement,50 ton screw jack lift,500 kn gear lift, screw jack vertical arrangement,50 tonnes acme screw adjuster mechanism static load capacity 500 kn, high speed torque 442 n.m, low speed torque 148 n.m. lead screw (spindle) Tr120x14. high speed gear ratio 1/14, low speed gear ratio 1/56. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 5500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jtc25 worm gear screw lifter,2.5 ton worm and screw gear lift,2.5 tonnes self locking of worm gears drive,25 kn precision worm wheel screw jack,5000lbs worm gear screw jack mechanism,screw actuator worm gear static load capacity 25 kn, high speed torque 13.9 n.m, low speed torque 4.5 n.m. lead screw (spindle) Tr30x6. high speed gear ratio 1/6, low speed gear ratio 1/24. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 1500 mm stroke. single screw jack or multiple screw jacks system arrangements.
250kn worm gear screw jack,jtc250 25 ton heavy load screw jack,25 tonnes high capacity machine screw actuators features:
1. Lifting Force 250kN. Under max. lifting force, drive torque high speed 200.36Nm, low speed 67.32Nm.
2. Acme screw diameter 80 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 3500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 3 cubic screw jack, Germany PFAFF MERKUR M6 cubic screw jack and GROB BJ3 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
solar tracking screw jack, ball screw jack applications solar panels, solar screw jack, screw jack type solar tracker motor, solar jacks and actuators regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
solar actuators and motorized jacks, solar tracking jacks and actuators, solar tracking drive jacks, solar tracking drive actuators, self-locking powered actuators regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
solar jacks type, solar panel positioning gears jack, solar tracker jack with ball joint, uses of solar power screw jack, screw jack for solar panel tracking system mechanism regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Worm screw jack for solar trackers, solar tracking machine screw jack actuators, electric lightweight scew jacks solar tracking, self positioning solar panel jack regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
solar panel adjustment jack, solar panel tracking using screw jacks, solar tracker linear actuator, solar system screw drive, solar positioning system screw jack regular screw jack model:
JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP
10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.
Jtc200 worm gear screw lifter,20000kg rotating screw jack,20ton travelling nut screw jack,20 t 4 ft worm gear lift jack,200 kn worm screw lift assembly,20 tonnes cubical gearbox screw jack static load capacity 200 kn, high speed torque 146 n.m, low speed torque 48 n.m. lead screw (spindle) Tr70x10. high speed gear ratio 1/10, low speed gear ratio 1/40. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 3000 mm stroke. single screw jack or multiple screw jacks system arrangements.
35 ton lifting jack,jtc350 350kn worm gear screw jack,high lift mechanical gear jack,long stroke linear screw drive actuator features:
1. Lifting Force 350kN. Under max. lifting force, drive torque high speed 325.51Nm, low speed 107.46Nm.
2. Acme screw diameter 100 mm, pitch 10 mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. Maximum permissible 4500mm travel length.
8. Amce screw end fittings include top plate, clevis end, plain end, threaded end and forked head.
9. Individually or multiple screw jack lift system arrangements are available.
10. Equivalent to USA THOMSON JUMBO 4 cubic screw jack, Germany PFAFF MERKUR M7 cubic screw jack and GROB BJ4 cubic screw jack.
11. Application in roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
we are professional 1 ton solar actuators and motorized jacks, 5 ton solar tracking jacks and actuators, 10 ton solar tracking drive jacks, 20 ton solar tracking drive actuators for solar panel tracker system in canada manufacturers and suppliers in China.
we are professional Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm for nc precision slitting production line automatic slitter machine in australia manufacturers and suppliers in China.
we are professional 2.5kn, 5kn, 10kn lightweight micro miniature screw jacks for aluminium can production lines in uk manufacturers and suppliers in China.
we are professional 1 ton, 2 ton, 3 ton, 5 ton, 10 ton precision gear lifts worm gear drive, precision screw jack mechanical actuators, precision linear jack screw for precision straightener in usa manufacturers and suppliers in China.
we are professional 5 ton upright traveling nut machine screw jack, 5t load acme nut screw jack for tunnel freezer top lid lifting in food processing lines in united kingdom manufacturers and suppliers in China.
we are professional Self locking jack screw driven scissor mechanism, worm gear screw jack style scissor lift system, acme screw jack lifting system for scissor lift table in singapore manufacturers and suppliers in China.
we are professional 25kn load capacity machine screw jacks 300mm stroke for continuous pu panel production lines in thailand manufacturers and suppliers in China.
we are professional 5 ton theatre lifting stage jack, 10 ton acme screws stage and theatre lifts, 20 ton stage and orchestra platform lifts manufacturers and suppliers in China.
5 Ton Machine Screw Jacks, 20 Ton Upright Translating Screw Jacks For Lift Different Rotors Of Horizontal Axis Balancing Machines In Russia
This balancing machine is a dynamic soft bearing machine with a horizontal axis.
It has an AC motor with variable speed, which drives the balancing machine through a belt drive system.
The machine can be mounted on a reinforced concrete basement or rigid table for better operating conditions. Self-installing rollers, ac frequency inverter, 5t or 20t screw jacks for for smooth and non-shock rotor stop.
20 Ton Upright Translating Screw Jacks
Model: JT-20T-US-350-L-I-C-N
* Static loading capacity max. 20t, spindle tr64x8
* Upright mounting, translating screw configuration
* Travel stroke 350 mm
* Low worm gear ratio 1/32, 0.25mm per revolution of input shaft
* Double input shaft, no additional accessory
5 Ton Upright Translating Screw Jacks
Model: JT-5T-US-300-L-I-C-N
* Static loading capacity max. 5t, spindle tr38x6
* Upright mounting, translating screw configuration
* Travel stroke 300 mm
* Low worm gear ratio 1/24, 0.25mm per revolution of input shaft
* Double input shaft, no additional accessory
DC 24V Geared Motor Screw Jack Actuator Hoisting Water Gates In Agricultural Industry In Malaysia
DC 24V Geared Motor driven actuator (screw jack) for water gate up/down movement, water gate length 7ft, width 53 Inches, weight 1.5 Tons. Stroke length 7 feet. DC 24V operated.
10T LOAD CAPACITY SCREW JACK ACTUATOR
Model: JTW-10T-IS-2500-L-II-C-PP/BB/LS
* Max. 10 ton load, lifting screw Tr58x12
* Inverted, translating screw, 7 ft stroke(2500mm deduct bellows retract length)
* Low worm gear ratio, 1/24, 0.5mm stroke per revolution of worms, double worms input
* Accessories include protective tube, bellows boots, limit switches, clevis end.
24V DC MOTOR WITH GEAR REDUCER
Model: 130ZYT105PX4A1
* 1Kw 3000rpm input dc motor
* Gear reducer with 1/4 reduction ratio
UK Live Centre In Electron Beam Welding Machines Height Adjustment By Cast Iron Crank Handle Operated Small Jack Screw Lift Mechanism
UK customers new design, use our micro-miniature screw jacks with hand wheel manual operation for height adjustable live centre in electroc beam welding machines.
Upright Travelling Nut Rotating Screw Jack Model: JTC2.5-UR-300-H-VI-A-HW
1. Jtc2.5 model, lifting screw tr16x4, max. load capacity 2.5kN
2. Upright mounting, travelling nut rotating screw configuration
3. 300mm stroke with high worm gear set ratio, 1mm per turn of hand wheel
4. Plain end fitting 12mm matching top ball bearing
5. Single input worm shaft, left side
6. Accessory: 100mm diam. hand wheel, bronze travelling nut with mounting 6 holes
What are the main advantages of using HR recruiter services.pdfHumanResourceDimensi1
HR recruiter services offer top talents to companies according to their specific needs. They handle all recruitment tasks from job posting to onboarding and help companies concentrate on their business growth. With their expertise and years of experience, they streamline the hiring process and save time and resources for the company.
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
RMD24 | Retail media: hoe zet je dit in als je geen AH of Unilever bent? Heid...BBPMedia1
Grote partijen zijn al een tijdje onderweg met retail media. Ondertussen worden in dit domein ook de kansen zichtbaar voor andere spelers in de markt. Maar met die kansen ontstaan ook vragen: Zelf retail media worden of erop adverteren? In welke fase van de funnel past het en hoe integreer je het in een mediaplan? Wat is nu precies het verschil met marketplaces en Programmatic ads? In dit half uur beslechten we de dilemma's en krijg je antwoorden op wanneer het voor jou tijd is om de volgende stap te zetten.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
Unveiling the Secrets How Does Generative AI Work.pdfSam H
At its core, generative artificial intelligence relies on the concept of generative models, which serve as engines that churn out entirely new data resembling their training data. It is like a sculptor who has studied so many forms found in nature and then uses this knowledge to create sculptures from his imagination that have never been seen before anywhere else. If taken to cyberspace, gans work almost the same way.
Digital Transformation and IT Strategy Toolkit and TemplatesAurelien Domont, MBA
This Digital Transformation and IT Strategy Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants, after more than 5,000 hours of work. It is considered the world's best & most comprehensive Digital Transformation and IT Strategy Toolkit. It includes all the Frameworks, Best Practices & Templates required to successfully undertake the Digital Transformation of your organization and define a robust IT Strategy.
Editable Toolkit to help you reuse our content: 700 Powerpoint slides | 35 Excel sheets | 84 minutes of Video training
This PowerPoint presentation is only a small preview of our Toolkits. For more details, visit www.domontconsulting.com
Buy Verified PayPal Account | Buy Google 5 Star Reviewsusawebmarket
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
🟢 Email Access
🟢 Bank Added
🟢 Card Verified
🟢 Full SSN Provided
🟢 Phone Number Access
🟢 Driving License Copy
🟢 Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1(218) 203-5951
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
ENTREPRENEURSHIP TRAINING.ppt for graduating class (1).ppt
Smallest cubic screw jack, miniature wormgear screw jack, 2.5kn cubic screw jack, small miniature worm gear linear actuator suppliers, manufacturers
1. The Smallest Worm Screw Jacks On The World Markets
Micro-Miniature Screw Jacks Features
1. Lifting Force 2.5kN. Under max. lifting force, drive torque 1.2Nm (high speed), 0.4Nm
(low speed).
2. Lifting screw diameter 16 mm, pitch 4 mm.
3. High gear ratio 1/4, low gear ratio 1/16.
4. Translating screw, travelling nut rotating screw, keyed translating screw configurations
in upright or inverted mounting orientations.
5. Precision positioning, self-locking lead screw which supports the loads and hold
position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by hand wheel or crank handle, or electric driven screw jack
by 3-phase or single phase motor or gear reduction motor.
7. No standard lead screw travel length, all lead screw travel length is processed
according customers requirements. Maximum permissible 300mm travel length.
8. Lead screw end fittings include top plate, clevis end, plain end and threaded end.
9. Individually or multiple screw jack lift system arrangements are available.
Micro-Miniature Screw Jacks Applications
Micro-miniature screw jacks matching mini bevel gearboxes with parts are composed of
small screw jacks lifting system, which widely used in beverage can conveyor systems
height adjustment and beverage can washing area of the production line, saving
man-hours and lowering the down time, crucial for increasing output and are extremely
pleased with the recent financial benefits. Prior to the upgrade when the can washer area
on each line required to be changed to accommodate a run taller or shorter cans the
conversion would be completed manually. Small screw jack lifting systems is utilized
several stages for washing and blow drying the cans. Suitable for lifting height adjustment
and washing in aluminium can production lines, magnetic conveying systems, steel can
line, aluminium can line, food can line, upgrade fill and packaging line, conversion steel
aluminum can line, bottle conveyor systems, case and pallet conveyor systems.
Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
3. Micro-Miniature Screw Jacks Dimensions
JTC2.5 Mini Screw Jack Ordering Information
JTC
1
-
2.5
2
-
UR 3
300
4
-
H 5
II
6
-
C
7
-
HW
8
1. Jack Series
JT: "Jacton" brand screw jack
C series cubic screw jack
2. Load Capacity
2.5: lifting force 2.5kN, only for thrust load.
Before selecting 2.5 frame no., please check above JTC2.5 mini screw jack specifications.
3. Screw Configuration & Mounting Orientation
US: Upright translating screw
IS: Inverted translating screw
UK: Upright keyed screw
IK: Inverted keyed screw
UR: Upright rotating screw
IR: Inverted rotating screw
Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
4. 4. Travel Stroke
300, means travel stroke 300mm
No standard travel stroke, JTC2.5 mini screw jack travel stroke produced following your
require travel length, maximum permissible 300mm travel length.
5. Gear Ratio
JTC2.5 mini screw jack gear ratios include 1/4, 1/16.
H: High gear ratio 1/4, 1mm travel length per full turn of worm shaft.
L: Low gear ratio 1/16, 0.25mm travel length per full turn of worm shaft.
6. Lift Screw End Fittings
JTC2.5 mini screw jack standard acme screw end fittings includes top plate, clevis end,
threaded end and plain end. If you have your own acme screw end fitting design, we can
make them following your requirements.
Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
5. 7. Worm Shaft Input Types
A: left side worm shaft input.
B: right side worm shaft input.
C: double worm shaft input.
M1: left side motor flange direct input.
M2: right side motor flange direct input.
M3: left side motor flange direct input, right side worm shaft input.
M4: right side motor flange direct input, left side worm shaft input.
8. Accessories
N: No accessory
PP: Protective pipe (lifting screw dustproof and rustproof)
BB: Bellows boot (lifting screw dustproof and rustproof)
HW: Hand wheel (hand operated jack, optional hand crank)
DC: Digital counter or digital position indicator (installed on worm shaft, precision display
stroke)
EM: Electric motor (motor driven jack, optional ac motor or dc motor)
GR: Gear reducer (motor driven jack with low speed, optional gear motor, worm gear
Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
6. reducer, helical gear reducer)
LS: Limit switches (control stroke, when full extend or full retract travel, the motor will
stop )
SN: Stop nut (installed at the bottom of lifting screw, prevent lifting screw from being
removed from the jack housing)
PB: Pillow block bearing (when long distance between jack and jack, which fixes
connecting shaft, avoid swing)
FC: Flexible coupling (for shafts connection like connecting shaft and worm shaft)
CS: Connecting shaft (for connecting drive shafts like screw jack lift system)
BG: Miter gearbox (right angle transmit rotary motions, power or torque in screw jack lift
system)
SP: Swivel plate or trunnion mounting plates (installed on jack base with swivel pins for
pivoting of loads)
SM: Swivel mounting base or trunnion mounting base (matching swivel plate or trunnion
mounting plates)
Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
7. “JACTON” Company Profiles
Precision worm gear screw jacks, lifting jacks, machine screw actuators, ball screw jacks,
trapezoidal screw jacks, bevel gear screw jacks, worm gear driven lift mechanism, spiral
bevel gears right angle gearbox, miter gears drives 90 degree gearbox, multiple units
screw jack lifting system arrangements manufacturers and suppliers in China – Jacton
Electromechanical Co.,Ltd. Since 1997, only occupied 500 square meters for factory, up
to 2012, factory is occupied 5000 square meters with 55 employee staffs. With senior
engineers, experienced skilled workers and practiced sales teams, our company
consistently provides ideal mechanical power transmission solutions.
Application in roll forming line, theater stage lift table, solar tracking system, earth station
antennas, hydropower sluice gate, food processing line, coil sheet slitter line, tension
leveling line and straightening line, continuous galvanizing line, beverage production line,
railway maintenance lifting jack, angle tilt adjustments with double clevis, aircraft docking
system, printing press, plastic extruder, sewage auger, bonding equipment, metering
auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web
finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump
drive, sand spreader, residential mower, snow blower, mining equipment, crane,
agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader
and sewage conveyor etc.
Manufacturing Equipments include cnc lathes, gear cutting hobbing machines, radial
drilling machines, high speed thread whirling machines, worm shaft grinding machines,
vertical milling machines, high precision CNC machine tools, cnc precision automatic
lathes, lathes, punching machines, hydraulic straightening machines, polisher machines.
Testing equimments include noise meters, infrared thermometers, hardness testers, gear
meshing testing machines, micrometers, testing lifting screw moving smoothly adjustable
working table.
Customers are distributed throughout the world, such as USA, Canada, Mexico, Brazil,
Argentina, Chile, Australia, New Zealand, Japan, Korea, Thailand, India, Indonesia,
Malaysia, Philippines, Singapore, Vietnam, Sri Lanka, Pakistan, Iran, UAE, Saudi Arabia,
Turkey, South Africa, Egypt, Zambia, Germany, UK, Poland, Sweden, Slovak, Spain,
Greece, Italy, Russia, Netherland, Danmark, Belgium and Other Countries.
Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack