Forum 06 12-16 - reservoir geomechanics
•
1 like•240 views
This presentation discusses reservoir geomechanics and focuses on surface subsidence prediction, coupled workflows for reservoir development and management, process automation, and fault reactivation prediction to help reservoir engineers, geologists, and geomechanics experts. It also briefly mentions modeling 50 million years of reservoir behavior in 50 seconds.
Report
Share
Report
Share
Download to read offline
Recommended
24 Actinide and brine chemistry in salt repositories: Updates from ABC Salt (V)
24 Actinide and brine chemistry in salt repositories: Updates from ABC Salt (V)Sandia National Laboratories: Energy & Climate: Renewables
The document summarizes the Actinide and Brine Chemistry in a Salt Repository (ABC Salt V) workshop held in March 2017. It provides an overview of the workshop sessions which covered updates on the Waste Isolation Pilot Plant (WIPP) and international salt repositories, salt research project updates, microbial effects, corrosion and sorption studies, modeling and solubility studies, temperature effects, and actinide redox chemistry and solubility. Key discussions focused on data gaps in solubility models and understanding actinide redox processes under repository conditions. The workshop facilitated productive discussions between international researchers and showed continued progress is being made in salt repository research despite challenges.Reservoir modeling and characterization
1) Sedimentary basins are regions where thick layers of sediment have accumulated, up to 20 km deep in some cases. They form primarily through the extension of tectonic plates.
2) Most sedimentary basins contain source rocks rich in organic matter that generate hydrocarbons like oil and gas during burial and heating over geological time.
3) If the right combination of source, reservoir, seal and timing conditions exist within a sedimentary basin, significant accumulations of oil and gas can be discovered and produced from conventional reservoirs.
A Study Of Production Optimization Of An Oil Copy
My Defence presentation for the Master\'s Project which I did with British Petroleum and presented at Dalhousie University, Canada.
Volume calculation
The document provides information on prospect evaluation methodology for oil companies and governments. It discusses how prospect evaluation is used for resource assessment, contracting areas, work commitments, and investment decisions. The methodology includes volumetric and economic evaluations using seismic interpretation, mapping, cash flow analysis, and other factors. Equations and parameters involved in calculating the volumes of oil and gas in-place are also presented, such as pore volume, recovery factors, and formation properties. An example calculation of recoverable oil resources is included to demonstrate the process.
Petrel course
This document outlines the steps in a Petrel course, including loading seismic data, well data like trajectories and logs, creating synthetic seismograms, picking horizons in the time domain, applying seismic attributes, converting horizons to depth using well data, and exporting maps of depth surfaces. The horizon picking was noted to be for practice only.
Estmation of oil & gas proven probable posiible
This document provides information on estimating oil and gas reserves. It defines various classifications of reserves from proven to unproven, and how reserves are estimated using volumetric, material balance, and production performance methods. The key classifications discussed are proven and probable reserves, with proven reserves having a 90% certainty of recovery and probable having 50% certainty. Volumetric estimation calculates initial hydrocarbon volumes using parameters like rock volume, porosity, fluid properties, and recovery factors.
Reservoir mapping
The document provides information on reservoir mapping techniques and workflows. It discusses constructing structure maps, isopach maps, net pay maps, and fault maps to characterize reservoirs based on well log and seismic data. The maps are used for well placement, reserves calculations, and reservoir performance monitoring. Key steps include reservoir correlation, defining flow units, determining fluid contacts, and integrating geological and petrophysical data. The results provide insights into reservoir properties and geometry to promote optimal field development.
formation evaluation chapter 1
Formation evaluation and well logging are processes used to determine the properties of subsurface reservoirs and identify commercially viable oil and gas fields. Key logging tools developed over time include resistivity logs in the 1920s, dipmeters in the 1940s, gamma ray and neutron logs in the 1940s, sonic logs in the 1950s, density logs in the 1960s, and logging while drilling was introduced, allowing real-time data acquisition. The document provides a historical overview of the development of various openhole well logging tools and techniques.
Recommended
24 Actinide and brine chemistry in salt repositories: Updates from ABC Salt (V)
24 Actinide and brine chemistry in salt repositories: Updates from ABC Salt (V)Sandia National Laboratories: Energy & Climate: Renewables
The document summarizes the Actinide and Brine Chemistry in a Salt Repository (ABC Salt V) workshop held in March 2017. It provides an overview of the workshop sessions which covered updates on the Waste Isolation Pilot Plant (WIPP) and international salt repositories, salt research project updates, microbial effects, corrosion and sorption studies, modeling and solubility studies, temperature effects, and actinide redox chemistry and solubility. Key discussions focused on data gaps in solubility models and understanding actinide redox processes under repository conditions. The workshop facilitated productive discussions between international researchers and showed continued progress is being made in salt repository research despite challenges.Reservoir modeling and characterization
1) Sedimentary basins are regions where thick layers of sediment have accumulated, up to 20 km deep in some cases. They form primarily through the extension of tectonic plates.
2) Most sedimentary basins contain source rocks rich in organic matter that generate hydrocarbons like oil and gas during burial and heating over geological time.
3) If the right combination of source, reservoir, seal and timing conditions exist within a sedimentary basin, significant accumulations of oil and gas can be discovered and produced from conventional reservoirs.
A Study Of Production Optimization Of An Oil Copy
My Defence presentation for the Master\'s Project which I did with British Petroleum and presented at Dalhousie University, Canada.
Volume calculation
The document provides information on prospect evaluation methodology for oil companies and governments. It discusses how prospect evaluation is used for resource assessment, contracting areas, work commitments, and investment decisions. The methodology includes volumetric and economic evaluations using seismic interpretation, mapping, cash flow analysis, and other factors. Equations and parameters involved in calculating the volumes of oil and gas in-place are also presented, such as pore volume, recovery factors, and formation properties. An example calculation of recoverable oil resources is included to demonstrate the process.
Petrel course
This document outlines the steps in a Petrel course, including loading seismic data, well data like trajectories and logs, creating synthetic seismograms, picking horizons in the time domain, applying seismic attributes, converting horizons to depth using well data, and exporting maps of depth surfaces. The horizon picking was noted to be for practice only.
Estmation of oil & gas proven probable posiible
This document provides information on estimating oil and gas reserves. It defines various classifications of reserves from proven to unproven, and how reserves are estimated using volumetric, material balance, and production performance methods. The key classifications discussed are proven and probable reserves, with proven reserves having a 90% certainty of recovery and probable having 50% certainty. Volumetric estimation calculates initial hydrocarbon volumes using parameters like rock volume, porosity, fluid properties, and recovery factors.
Reservoir mapping
The document provides information on reservoir mapping techniques and workflows. It discusses constructing structure maps, isopach maps, net pay maps, and fault maps to characterize reservoirs based on well log and seismic data. The maps are used for well placement, reserves calculations, and reservoir performance monitoring. Key steps include reservoir correlation, defining flow units, determining fluid contacts, and integrating geological and petrophysical data. The results provide insights into reservoir properties and geometry to promote optimal field development.
formation evaluation chapter 1
Formation evaluation and well logging are processes used to determine the properties of subsurface reservoirs and identify commercially viable oil and gas fields. Key logging tools developed over time include resistivity logs in the 1920s, dipmeters in the 1940s, gamma ray and neutron logs in the 1940s, sonic logs in the 1950s, density logs in the 1960s, and logging while drilling was introduced, allowing real-time data acquisition. The document provides a historical overview of the development of various openhole well logging tools and techniques.
Nivel de red en internet
Internet es una red de redes interconectadas que utiliza el protocolo IP como elemento común. IP permite la comunicación entre hosts conectados a redes físicas diversas. Cada host tiene una dirección IP única que identifica su ubicación en la red, y las máscaras de red dividen las direcciones IP en parte de red y parte de host.
Eliwor associati vantaggi
Associati alla più importante community del lusso, scopri tutti i vantaggi. Inizia a vivere la tua vita in first class da subito !
Kanoa Ishihara - State Theatre Culture of Inclusion Grant
This document provides background information and research on the State Theatre of Ithaca and the cultural and economic impacts of creative arts initiatives. It discusses how the State Theatre preserves Ithaca's history and identity and generates millions in local economic activity annually. The literature review also describes how the arts industry supports over a million jobs nationally and brings communities together while attracting skilled workers and stimulating downtown development.
Evaluación 4 periodo 2 competencia
Este documento define e introduce varios conceptos clave relacionados con Internet y la tecnología de la información. Explica que Internet es una red mundial de comunicaciones que conecta miles de redes de telefonía e informática para transmitir datos. También describe los navegadores web, motores de búsqueda, hipertexto, correo electrónico, sitios para compartir presentaciones y más formas de compartir información de manera digital.
Starbucks Social Media Strategy - by Kelli Kaufmann
The document provides a social media strategy for Starbucks. It includes a social media audit assessing their presence on various platforms, objectives to increase traffic and engagement, and strategies around content, paid promotion, and monitoring. Key dates and roles/responsibilities are outlined. Metrics on website traffic sources and growth of social channels over 3 months show success in reaching objectives.
María lucia castro german
El documento argumenta que no es posible una revolución educativa sin la integración de herramientas tecnológicas en el aula. Explica que las herramientas tecnológicas son vitales para el proceso de enseñanza y aprendizaje al permitir enseñar de una manera más realista y lograr los objetivos planificados de manera más efectiva. Menciona algunas herramientas tecnológicas como el cloud computing, Facebook y Twitter que han mejorado la comprensión de las lecciones y facilitado el acceso a los materiales
Trabajos taller fredy
The document appears to be a log of vehicle repair services provided between February 10th and March 15th. It lists the date, vehicle/client details, and services provided such as repairing and calibrating fuel pumps and injectors. The services range in price from $40,000 to $780,000. A variety of vehicles are listed including Campollo trucks, taxis, Toyota, Nissan, Mazda, and more.
Dinar Líneas Aéreas - Wikipedia
Dinar Líneas Aéreas was an Argentinian airline that operated from 1992 to 2002 with its headquarters in Salta, Argentina. It offered both charter and regular flights within Argentina and South America. At its peak, Dinar was known for its safety, punctuality, and menu overseen by chef Gato Dumas. Its fleet included Boeing and Airbus aircraft as well as smaller planes like the Fokker F-28 used for domestic routes.
Forum 06 12-16 - hydraulic fracture
Hydraulic fracturing simulations are important but challenging due to complex physical processes involved. Current industry practices make simplifying assumptions that limit accuracy. The document discusses three main alternatives for fracture modeling in finite element analysis: cohesive elements, extended finite element method (XFEM), and diffuse element damage theory. It also outlines development approaches using cohesive elements in Argentina and by SIMULIA, as well as benchmark models and the need for coupled reservoir-scale simulations.
Forum 06 12-16 - borehole stability
The document discusses borehole stability and completion processes. It describes factors that influence borehole stability like rock properties, stress fields, and pore pressure. Current industry models often make simplifying assumptions. Finite element modeling using Abaqus can account for more factors, including anisotropy, faults, creep, and chemical interactions. Results show stresses, safety margins, and how mud pressure optimization can improve stability. Borehole cementing is also discussed, highlighting how including creep affects initial stresses versus no stresses in the slurry. In-life loads like production and stimulation can further impact the cement sheath.
SOLAER
SOLAER es una empresa de ingeniería multidisciplinaria que ofrece servicios de diseño, análisis y simulación en las industrias de siderurgia, energía, mecánica, estructuras/civil y minería. Realizan modelización numérica y análisis técnicos como estrés, vibraciones, fatiga y propagación de daños para optimizar el diseño de equipos y estructuras en etapas tempranas de los proyectos. Cuentan con experiencia en grandes empresas de la región.
Brochure_Antares_USA_V1
We are a company that provides automation, IT, engineering and consulting services to help customers improve productivity, efficiency and quality. We offer comprehensive advice from project planning through implementation, customized solutions, and experienced professionals. Our services include automation and control systems, industrial IT solutions, robotics, machine vision, and quality control.
Brochure_Antares Mexico
La empresa se dedica a prestar servicios de automatización, consultoría, desarrollo de software, asistencia técnica y servicios afines. Ofrece asesoramiento integral para proyectos de automatización, soluciones distintivas con ventajas competitivas, y recursos profesionales altamente capacitados.
ASTS Partnerships Ve Oct 2016
ASTERAS provides strategic partnerships and consulting services to help customers gain competitive advantages. They offer various consulting services including construction design, project management, industrial engineering, manufacturing consulting, industrial IT, lean management, and more. ASTERAS works with various strategic and operating partners that provide complementary engineering, IT, automation, and industrial services globally.
Former-Engineering-
Roberto Vitale, the former Director of Engineering in Canada, has accepted a new role leading the engineering offices in China and Southeast Asia. Vitale previously worked in China during the construction of Tenaris' Qingdao facility. His new role will involve developing the engineering offices in Qingdao and Beijing. Vitale's experience as head of engineering in Canada prepared him to develop the new Chinese engineering offices. He helped integrate the Canadian engineering teams and develop his successor before taking on the new challenge in China.
TQSP en La Nacion
Techint inauguró una planta en China para producir conexiones y cuplas para tubos de acero con una inversión de $35 millones. La planta tiene una capacidad de 50,000 toneladas anuales y 150 empleados. El presidente de Tenaris dijo que tener una planta en China era un sueño que no imaginaban hace 5 años y que ven un futuro de crecimiento en el país. Funcionarios chinos prometieron continuar apoyando a Tenaris para crear un entorno favorable.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
More Related Content
Viewers also liked
Nivel de red en internet
Internet es una red de redes interconectadas que utiliza el protocolo IP como elemento común. IP permite la comunicación entre hosts conectados a redes físicas diversas. Cada host tiene una dirección IP única que identifica su ubicación en la red, y las máscaras de red dividen las direcciones IP en parte de red y parte de host.
Eliwor associati vantaggi
Associati alla più importante community del lusso, scopri tutti i vantaggi. Inizia a vivere la tua vita in first class da subito !
Kanoa Ishihara - State Theatre Culture of Inclusion Grant
This document provides background information and research on the State Theatre of Ithaca and the cultural and economic impacts of creative arts initiatives. It discusses how the State Theatre preserves Ithaca's history and identity and generates millions in local economic activity annually. The literature review also describes how the arts industry supports over a million jobs nationally and brings communities together while attracting skilled workers and stimulating downtown development.
Evaluación 4 periodo 2 competencia
Este documento define e introduce varios conceptos clave relacionados con Internet y la tecnología de la información. Explica que Internet es una red mundial de comunicaciones que conecta miles de redes de telefonía e informática para transmitir datos. También describe los navegadores web, motores de búsqueda, hipertexto, correo electrónico, sitios para compartir presentaciones y más formas de compartir información de manera digital.
Starbucks Social Media Strategy - by Kelli Kaufmann
The document provides a social media strategy for Starbucks. It includes a social media audit assessing their presence on various platforms, objectives to increase traffic and engagement, and strategies around content, paid promotion, and monitoring. Key dates and roles/responsibilities are outlined. Metrics on website traffic sources and growth of social channels over 3 months show success in reaching objectives.
María lucia castro german
El documento argumenta que no es posible una revolución educativa sin la integración de herramientas tecnológicas en el aula. Explica que las herramientas tecnológicas son vitales para el proceso de enseñanza y aprendizaje al permitir enseñar de una manera más realista y lograr los objetivos planificados de manera más efectiva. Menciona algunas herramientas tecnológicas como el cloud computing, Facebook y Twitter que han mejorado la comprensión de las lecciones y facilitado el acceso a los materiales
Trabajos taller fredy
The document appears to be a log of vehicle repair services provided between February 10th and March 15th. It lists the date, vehicle/client details, and services provided such as repairing and calibrating fuel pumps and injectors. The services range in price from $40,000 to $780,000. A variety of vehicles are listed including Campollo trucks, taxis, Toyota, Nissan, Mazda, and more.
Viewers also liked (9)
Kanoa Ishihara - State Theatre Culture of Inclusion Grant
Kanoa Ishihara - State Theatre Culture of Inclusion Grant
Starbucks Social Media Strategy - by Kelli Kaufmann
Starbucks Social Media Strategy - by Kelli Kaufmann
More from Roberto Vitale
Dinar Líneas Aéreas - Wikipedia
Dinar Líneas Aéreas was an Argentinian airline that operated from 1992 to 2002 with its headquarters in Salta, Argentina. It offered both charter and regular flights within Argentina and South America. At its peak, Dinar was known for its safety, punctuality, and menu overseen by chef Gato Dumas. Its fleet included Boeing and Airbus aircraft as well as smaller planes like the Fokker F-28 used for domestic routes.
Forum 06 12-16 - hydraulic fracture
Hydraulic fracturing simulations are important but challenging due to complex physical processes involved. Current industry practices make simplifying assumptions that limit accuracy. The document discusses three main alternatives for fracture modeling in finite element analysis: cohesive elements, extended finite element method (XFEM), and diffuse element damage theory. It also outlines development approaches using cohesive elements in Argentina and by SIMULIA, as well as benchmark models and the need for coupled reservoir-scale simulations.
Forum 06 12-16 - borehole stability
The document discusses borehole stability and completion processes. It describes factors that influence borehole stability like rock properties, stress fields, and pore pressure. Current industry models often make simplifying assumptions. Finite element modeling using Abaqus can account for more factors, including anisotropy, faults, creep, and chemical interactions. Results show stresses, safety margins, and how mud pressure optimization can improve stability. Borehole cementing is also discussed, highlighting how including creep affects initial stresses versus no stresses in the slurry. In-life loads like production and stimulation can further impact the cement sheath.
SOLAER
SOLAER es una empresa de ingeniería multidisciplinaria que ofrece servicios de diseño, análisis y simulación en las industrias de siderurgia, energía, mecánica, estructuras/civil y minería. Realizan modelización numérica y análisis técnicos como estrés, vibraciones, fatiga y propagación de daños para optimizar el diseño de equipos y estructuras en etapas tempranas de los proyectos. Cuentan con experiencia en grandes empresas de la región.
Brochure_Antares_USA_V1
We are a company that provides automation, IT, engineering and consulting services to help customers improve productivity, efficiency and quality. We offer comprehensive advice from project planning through implementation, customized solutions, and experienced professionals. Our services include automation and control systems, industrial IT solutions, robotics, machine vision, and quality control.
Brochure_Antares Mexico
La empresa se dedica a prestar servicios de automatización, consultoría, desarrollo de software, asistencia técnica y servicios afines. Ofrece asesoramiento integral para proyectos de automatización, soluciones distintivas con ventajas competitivas, y recursos profesionales altamente capacitados.
ASTS Partnerships Ve Oct 2016
ASTERAS provides strategic partnerships and consulting services to help customers gain competitive advantages. They offer various consulting services including construction design, project management, industrial engineering, manufacturing consulting, industrial IT, lean management, and more. ASTERAS works with various strategic and operating partners that provide complementary engineering, IT, automation, and industrial services globally.
Former-Engineering-
Roberto Vitale, the former Director of Engineering in Canada, has accepted a new role leading the engineering offices in China and Southeast Asia. Vitale previously worked in China during the construction of Tenaris' Qingdao facility. His new role will involve developing the engineering offices in Qingdao and Beijing. Vitale's experience as head of engineering in Canada prepared him to develop the new Chinese engineering offices. He helped integrate the Canadian engineering teams and develop his successor before taking on the new challenge in China.
TQSP en La Nacion
Techint inauguró una planta en China para producir conexiones y cuplas para tubos de acero con una inversión de $35 millones. La planta tiene una capacidad de 50,000 toneladas anuales y 150 empleados. El presidente de Tenaris dijo que tener una planta en China era un sueño que no imaginaban hace 5 años y que ven un futuro de crecimiento en el país. Funcionarios chinos prometieron continuar apoyando a Tenaris para crear un entorno favorable.
More from Roberto Vitale (9)
Recently uploaded
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaA review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Low power architecture of logic gates using adiabatic techniques
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Recently uploaded (20)
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
bank management system in java and mysql report1.pdf
bank management system in java and mysql report1.pdf
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Forum 06 12-16 - reservoir geomechanics
- 4. Several years of development at reservoir scale:
- 8. Prediction of faults reactivation: Geologist Reservoir engineer Geomechanics expert
- 10. 50,000,000 years in 50 seconds…
- 11. THANK YOU