Fonroche Lighting installed 1 Smartlight Power 365 single arm light for an isolated bus shelter in Brix, France. Installed to improve security for passengers.
Fonroche Solar Street Lighting Case Study: Corporate Parking LotFred Hagelberg
Fonroche Lighting installed 4 Smartlight Power 365 single arm and 3 Smartlight double arm lights for a company parking area in La Poste Villeneuve-sur-Lot, France
Fonroche Solar Street Lighting Case Study: Corporate Parking LotFred Hagelberg
Fonroche Lighting installed 4 Smartlight Power 365 single arm and 3 Smartlight double arm lights for a company parking area in La Poste Villeneuve-sur-Lot, France
Hitechled integrated solar led street light vs other street lightsJames Chen
Hitechled engaged in providing green renewable energy solutions. Our new generation all in one integrated smart solar led street light, which integrates high lumen LED lamp, latest LiFePO4 lithium battery(about 2000circles,more than 5 years. Much better than normal Li-Ion battery which only about 500circles),high efficient Sunpower monocrystal solar panel (22% transfer ratio,whiles others normal mono solar only about 17% transfer ratio) and the smart controller with PIR motion sensor(optional) together. It is 100% clean,green, renewable light,can be frequently used new rural construction lighting, residential lighting,parking lot lighting, pathway lighting , ramp lighting,perimeter security lighting, farm & ranch lighting, wildlife area lighting,dock& pier lighting ,garden lighting , campus lighting ,county yards lighting, desert lighting, seaside resort lighting, military base lighting, any exterior area wherever there is sufficient sunlight, especially for those places where wiring is not economic and/or achievable.
Integrated Solar LED Light For Street, Gaurden and HomeGauravVerma495
DESCRIPTION:
New Integrated solar street light is the Upgraded version of a solar street light system,it has Integrated design, put solar panel, LED lamp, battery and controller all in one box, without any candle, easy to install and ship, easy to maintain or replacement, also it can service longer life.
This research provides new effective and cheap designed system for save electrical energy dissipation in all urban area roads and highways. The aim of this system is to minimizing the waste electrical power on highways and urban area roads. The designed system depends on two Arduino circuit types, master and slave. The master Arduino has an ability to detect the day light by light dependent resistor (LDR) sensor and cars movements by pyroelectric infrared (PIR) sensor, according to these conditions, the master will send a signal by XBee module works as transmitter to the following five slaves Arduino which are waiting for a signal and receive it by XBee module works as receiver to turn ON the lights for 5 minutes then OFF it if there is no car movement on the street. The system can mount directly to the highway lights. The system has been tested and applied on the street lights, the system works perfectly and slaves respond fastly and effectively to the master Arduino signal.
SolarSphere's outdoor solar street lights, use solar energy to brighten parks, driveways, and other outdoor spaces while cutting energy usage and having little adverse environmental impact.
Hitechled integrated solar led street light vs other street lightsJames Chen
Hitechled engaged in providing green renewable energy solutions. Our new generation all in one integrated smart solar led street light, which integrates high lumen LED lamp, latest LiFePO4 lithium battery(about 2000circles,more than 5 years. Much better than normal Li-Ion battery which only about 500circles),high efficient Sunpower monocrystal solar panel (22% transfer ratio,whiles others normal mono solar only about 17% transfer ratio) and the smart controller with PIR motion sensor(optional) together. It is 100% clean,green, renewable light,can be frequently used new rural construction lighting, residential lighting,parking lot lighting, pathway lighting , ramp lighting,perimeter security lighting, farm & ranch lighting, wildlife area lighting,dock& pier lighting ,garden lighting , campus lighting ,county yards lighting, desert lighting, seaside resort lighting, military base lighting, any exterior area wherever there is sufficient sunlight, especially for those places where wiring is not economic and/or achievable.
Integrated Solar LED Light For Street, Gaurden and HomeGauravVerma495
DESCRIPTION:
New Integrated solar street light is the Upgraded version of a solar street light system,it has Integrated design, put solar panel, LED lamp, battery and controller all in one box, without any candle, easy to install and ship, easy to maintain or replacement, also it can service longer life.
This research provides new effective and cheap designed system for save electrical energy dissipation in all urban area roads and highways. The aim of this system is to minimizing the waste electrical power on highways and urban area roads. The designed system depends on two Arduino circuit types, master and slave. The master Arduino has an ability to detect the day light by light dependent resistor (LDR) sensor and cars movements by pyroelectric infrared (PIR) sensor, according to these conditions, the master will send a signal by XBee module works as transmitter to the following five slaves Arduino which are waiting for a signal and receive it by XBee module works as receiver to turn ON the lights for 5 minutes then OFF it if there is no car movement on the street. The system can mount directly to the highway lights. The system has been tested and applied on the street lights, the system works perfectly and slaves respond fastly and effectively to the master Arduino signal.
SolarSphere's outdoor solar street lights, use solar energy to brighten parks, driveways, and other outdoor spaces while cutting energy usage and having little adverse environmental impact.
The Solar Roadway generates electrical power from the sun and becomes a nation’s decentralized, intelligent, self-healing power grid, replacing our current deteriorating power distribution infrastructure.
IT INCLUDES SOLAR HIGHWAYS, VERTICAL WIND TURBINE, SPEED BUMBERS ENERGY GENERATION, REPORTS AND ARTICLES ETC... FULL PPT IS DONE BY THE STUDENTS OF MIT-WPU UNIVERSITY, KOTHRUD, PUNE...
DO LIKE AND SHARE THIS PPT
NanoGrids for Home Application in a Power Cloud Framework Alessandro Burgio
Thanks to recent innovations driven by European Union and national policies, lately it has been possible to see the realization of effective renewable energy technologies, for both large and small-scale use, alongside considerable cost reductions for customers. As a result, businesses and households can increasingly produce and consume, some or all, their own electricity, either instantaneously or in a deferred manner through decentralized storage, behind the connection point with the grid (i.e. the meter). In such a way, it is possible to maximize self-consumption in order to increase their efficiency of energy use and reduce their exposure to electricity prices. In the paper, the use of the so-called Nanogrid for Home Application is proposed to achieve the result of the self-consumption maximization. Moreover, a framework of exchanging energy among Prosumers (Power Cloud) is illustrated to promote the use of Nanogrids for Home Applications.
Solar powered led street light with auto intensity controlkanhaiya lal
This Project is all about Solar powered LED street light with auto intensity control.
Key Description :-
1. Solar Power
2. Solar Panel
3. LED
4. Batteries
5. 8051 IC
6. Regulator
7. MOSFET
8. Voltage Controller
9. Pro's and Con's
10. Features and Daily life usage
I've worked a lot on this PPt. It wont let you down so feel free to download it and rate my work so I can upload better Material regarding to this in near future.
Thank you!
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Gen AI Study Jams _ For the GDSC Leads in India.pdf
Fonroche Solar Street Lighting Case Study: Bus Stop (Isolated Area)
1. Benefits of solar lighting
Solar lighting permits to get public lighting thanks to photovoltaic energy production. This lighting
has several advantages:
- Compared to a streetlight connected to the grid, the installation of a solar streetlight does
not require civil engineering, the installation is therefore much simpler, faster and most of
all viable economically.
- The electricity bill drops to 0€ - System 100% autonomous. The only solar energy produced
by the PV panel is used to power the solar streetlight.
- The installation of ten Fonroche solar streetlights permits to avoid the emission of more
than one ton of CO2 per year.
- Solar lighting poses no risk of electrical shock. The system is working in continuous current
(24VDC TBT), so there is no electrical handling necessary for installation.
- The several components have a long service life, with a first maintenance only after ten
years, with the shift of the battery.
- It is possible to perform all the lighting profiles with a solar streetlight (dimming during the
night, extinction of the streetlight…).
- It is possible to communicate with the solar streetlights in order to know remotely and in
real time their operating state and monitor their impact on the project.
SOLAR LIGHTING
Isolated Point
Bus shelter
2. Case study: Bus shelter - Brix (50) - France
1/ THE NEED
- Securing of an isolated bus shelter
- Lighting of the bus shelter
- Compliance with the EN13201 standard
2/ THE PROBLEM
- Improve the user’s safety.
- Smart programming to avoid the luminous pollution and provide comfort to the inhabitants.
- Prevent the constraint of connection to the electrical grid
3/ THE FONROCHE SOLUTION
- Fonroche Lighting has proposed 1 Smartlight Power365 single arm to illuminate the bus shelter.
- The offered product is sized according to values measured by the nearest meteorological stations to
the project, based on the last ten years period. All the calculation is then based on the worst period
measured in order to ensure the operation of the solar streetlight all over the year.
- From the first day of installation, the solar streetlight has illuminated the bus shelter. One day of
installation has been enough for the streetlight to be completely installed and efficient.
- The Fonroche Lighting solar streetlights are sized to offer an autonomy of 365 days a year while being
compliant with the EN 13201 European lighting standard. The bus shelter is now totally secured by
the lighting all year long.
- The smart programming permits to reduce significantly the streetlight lighting power once the bus
tour is over. The comfort of the inhabitants in the surroundings is preserved.
4/ LIGHTING SURFACE DIAGRAM
3D modelling to represent the lighting surface offered by a Smartlight solar streetlight: a lighting surface
of 300 square meters: