Report
Share
Download to read offline
Recommended
Esp installation
Electrical Submersible Pump (ESP) is one of artificial lift methods that used widely in oil industry . In this presentation i showed the components of ESP and installation of it by using PIPESIM (schlumberger software )
Design manual-pump-station
This document summarizes the requirements for preliminary design of a new sewage pump station. It includes conducting geotechnical investigations, surveying the site, and performing an environmental assessment. The geotechnical investigation involves drilling borings and preparing a report with soil properties. The survey establishes horizontal and vertical site controls. An environmental site assessment evaluates potential soil and groundwater impacts. These preliminary design activities provide information to evaluate the site and develop facility alternatives.
Pumps Testing
The document discusses pump testing standards and their impact. It provides an overview of the ANSI/HI 14.6-2011 standard for pump acceptance testing. It explains that tolerances are needed because no pump is perfectly manufactured and tests have variability. It reviews previous standards and how they compare to the new HI 14.6-2011 and ISO 9906-2012 standards, noting the new standards allow specifying a power or efficiency tolerance. It provides default acceptance grades for different applications and discusses ensuring the supplier specifies which standard a pump curve or test is based on.
Horizontal or vertical inline pump design – which one to choose ?
Looking for horizontal or vertical inline pumps for your industry ? The pros & cons of each type that will help you make right decision.
Pump design presentation
The document provides an introduction to pump analysis. It discusses that the purpose of a pump is to increase the mechanical energy in a fluid by transporting it from a lower elevation to a higher elevation. It then covers key pumping concepts like capacity, head, efficiency, and power input. Specific types of pumps are defined, including centrifugal pumps which are most commonly used for wastewater applications. Methods for analyzing pump performance including head-capacity curves and affinity laws are also introduced.
ESP
The document outlines electrical submersible pumps (ESP), including their main components of motor, seal, and pump. It describes the motor parts of stator and rotor, types of seals, causes of seal failure, how centrifugal pumps work by spinning fluid within an impeller and diffuser, and sizes of pumps manufactured by Alkhorayef Company. It concludes with an overview of the functions of the motor, seal, and pump in ESP systems.
Esp systems Presentation
Brief presentation about ESP systems "artificial lifting" and focus on Egyptian market and on Novomet ESP manufacturer
Centrifugal Pump Testing Standards - Presentation by ITT
This presentation will give you all the details you need to know about Centrifugal Pumps Testing Standards.
It talks about API 610 , HI1.6, ISO 9906. What standards to follow while specifying pump testing and tolerances.
Recommended
Esp installation
Electrical Submersible Pump (ESP) is one of artificial lift methods that used widely in oil industry . In this presentation i showed the components of ESP and installation of it by using PIPESIM (schlumberger software )
Design manual-pump-station
This document summarizes the requirements for preliminary design of a new sewage pump station. It includes conducting geotechnical investigations, surveying the site, and performing an environmental assessment. The geotechnical investigation involves drilling borings and preparing a report with soil properties. The survey establishes horizontal and vertical site controls. An environmental site assessment evaluates potential soil and groundwater impacts. These preliminary design activities provide information to evaluate the site and develop facility alternatives.
Pumps Testing
The document discusses pump testing standards and their impact. It provides an overview of the ANSI/HI 14.6-2011 standard for pump acceptance testing. It explains that tolerances are needed because no pump is perfectly manufactured and tests have variability. It reviews previous standards and how they compare to the new HI 14.6-2011 and ISO 9906-2012 standards, noting the new standards allow specifying a power or efficiency tolerance. It provides default acceptance grades for different applications and discusses ensuring the supplier specifies which standard a pump curve or test is based on.
Horizontal or vertical inline pump design – which one to choose ?
Looking for horizontal or vertical inline pumps for your industry ? The pros & cons of each type that will help you make right decision.
Pump design presentation
The document provides an introduction to pump analysis. It discusses that the purpose of a pump is to increase the mechanical energy in a fluid by transporting it from a lower elevation to a higher elevation. It then covers key pumping concepts like capacity, head, efficiency, and power input. Specific types of pumps are defined, including centrifugal pumps which are most commonly used for wastewater applications. Methods for analyzing pump performance including head-capacity curves and affinity laws are also introduced.
ESP
The document outlines electrical submersible pumps (ESP), including their main components of motor, seal, and pump. It describes the motor parts of stator and rotor, types of seals, causes of seal failure, how centrifugal pumps work by spinning fluid within an impeller and diffuser, and sizes of pumps manufactured by Alkhorayef Company. It concludes with an overview of the functions of the motor, seal, and pump in ESP systems.
Esp systems Presentation
Brief presentation about ESP systems "artificial lifting" and focus on Egyptian market and on Novomet ESP manufacturer
Centrifugal Pump Testing Standards - Presentation by ITT
This presentation will give you all the details you need to know about Centrifugal Pumps Testing Standards.
It talks about API 610 , HI1.6, ISO 9906. What standards to follow while specifying pump testing and tolerances.
Strategy and Facility Management
Guest lecture strategy for 4th year FM students at Breda University of Applied Sciences, Academy for Hotel and Facility Management.
Students are introduced to FM and hospitality issues during military out-of-area operations in Afghanistan, Kandahar Airfield
Fire Pump System Pressure Control
www.Lucky-Bet.site => Bet on Sports - 50% Deposit Bonus
www.Lucky-Bet.site/casino => Online Casino - 5000$ Welcome Bonus
www.Lucky-Bet.site/lotto247 => Lotto247 - Win Big, Live Free
www.Lucky-Bet.site/eurobet => Best European Bookmaker
www.earnperhit.com/essay => Professional academic writing
NFPA 2009 Convention Session T33
Submersible pump
The document summarizes the submersible pump. It describes how the first submersible oil pump was invented in 1928 and the first deep-well water pump was developed in the 1960s. A submersible pump consists of a centrifugal pump close-coupled to a submersible motor, pump bowl, motor assembly, discharge column, and head assembly. It is used for pumping water from deep tube wells and has applications in sewage, industrial pumping, oil wells, and sea water handling. The capacity is determined by the impeller and diffuser width, while pressure depends on impeller diameter, speed, and number of impellers. Advantages include use in deep wells and small diameters, while disadvantages include difficulty
Electric submersible pump(esp)
An electrical submersible pump (ESP) is used to increase the pressure of well fluid and push it to the surface from deeper wells. It consists of a subsurface electric motor, seal section to connect the motor to multiple centrifugal pump stages, and an electric cable. The motor turns at high rpm to power the pump stages, each with an impeller and diffuser, to boost the fluid pressure stage by stage until it reaches the surface. ESPs provide high production volumes but require high voltages and more maintenance due to wear from sand and fluids. They are advantageous for deep wells but can have issues with sand and require careful installation and operation.
Modern Facility Management
This document discusses modern facility management in the 21st century. It outlines the five cardinal rules of facility management as well as essential management sections like operational excellence, compliance, human resources, business processes, and technical services. Lean production management focuses on minimizing waste and maximizing value-added activities compared to traditional batch production systems. Successful implementation of lean requires organization-wide changes, tools like value stream mapping and standard work, and a culture of continuous improvement. Compliance with regulations and quality standards is also important for operational excellence and opening doors to international business opportunities.
Business Plan Auto Repair Shop
The document proposes opening an auto repair workshop that operates at night in Peshawar, Pakistan. It will be a partnership between four individuals. The workshop aims to provide unique overnight auto repair services, hire experienced mechanics and engineering students, and earn profits while helping people. It will target middle and high-income customers and use marketing strategies like reasonable prices, guarantees, and advertisements. The organizational plan discusses hiring staff, expanding to other cities, and creating a formal work environment. Financial projections estimate the business will be profitable within a year.
Fire Pump Engines Overview
www.Lucky-Bet.site => Bet on Sports - 50% Deposit Bonus
www.Lucky-Bet.site/casino => Online Casino - 5000$ Welcome Bonus
www.Lucky-Bet.site/lotto247 => Lotto247 - Win Big, Live Free
www.Lucky-Bet.site/eurobet => Best European Bookmaker
www.earnperhit.com/essay => Professional academic writing
Key Characteristics and Requirements of Diesel Fire Pump Engines
Feasibility study of an Automobile Repair & Service Workshop
This document provides a pre-feasibility study for an automobile repair and service workshop. It recommends establishing a workshop offering mechanical repairs, denting and painting services, wheel alignment and balancing, and high pressure cleaning. The total project cost is estimated to be 2.94 million BDT. With projected revenues and costs, the internal rate of return is estimated to be 37% with a payback period of 2.5 years, indicating a financially viable investment opportunity.
Nfpa20 standard for the installation of stationary pumps for fire protection ...
This document summarizes the key requirements and guidelines from NFPA20 regarding fire pump installation and operation. It outlines the purpose of fire pumps to provide adequate water supply for sprinklers and standpipes. It describes common pump types like horizontal split case, vertical inline, end suction, and vertical turbine. Guidelines are provided for pump sizing within 90-150% of rated capacity. Requirements are listed for accessories like gauges, valves, relief valves and fittings. The roles of jockey pumps and pressure maintenance are explained. Operation parameters like start and stop pressures are also summarized.
Sprinkler system
This document summarizes the components and operation of a sprinkler system on a ship. It describes how sprinkler heads are activated by heat and spray water over a large area. The system includes a pressurized water tank, pumps, valves, and an alarm system. When a sprinkler activates, an alarm sounds and the location is indicated. The installation has multiple sections that can be isolated. Fresh water is used initially to reduce corrosion, and cleaning is important to ensure proper operation.
Sprinkler system.
Sprinkler systems are used in commercial buildings like offices, malls, hotels, and warehouses according to building codes. They contain sprinklers and a piping system connected to a water source. There are different types of sprinkler systems including wet pipe systems which always have water in the pipes, dry pipe systems used in cold areas to prevent freezing, and deluge systems which activate based on alarms instead of heat sensors and stay open once triggered. Sprinkler systems are designed based on the building contents and are intended to control fires.
Basics of pump
This Presentation is about working principle of Pumps.Basic Presentation regarding pumps , will definitely help beginners to learn pump types , their working , their parts etc.
Fire Safety Awareness
A 1-day staff Fire Awareness workshop. Presentation is an abstract from an instructor-led session, so certain elements are not fully active; video clips were also contained in the original. A full working version can be obtained from HJA: info@hollandjones.com.
Occupational Health & Safety Presentation
Presentation to (New & Old) employees on OH & S issues. An informed package to refresh & introduce others to issues involved within the workplace. It is focused on everyday issues occuring in work. Provides an awareness of rights & responsibilities of employees & employers. It is expected that any issues unresolved will be voiced objectively as possible. The overall intent is to provide a campaign on issues in both safety and health.
Occupational Health & Safety
This presentation summarizes common library workplace hazards, Queensland workplace health and safety legislation, employer and worker obligations, and the library's workplace health and safety representatives, committee, and risk management process. Common injuries include back injuries, neck strains, and slips and trips. The legislation outlines employer duties to ensure worker health and safety. Workers must follow safety instructions and not endanger others. The library has officers, a committee, and encourages all staff to be involved in identifying hazards, assessing risks, and implementing controls. Training covers safe procedures, equipment use, hazard identification, and emergency procedures.
Wireless control v mixer
This document shows how to wirelessly control a V-Mixer from a PC using a D-Link DIR-655 router. The router allows the V-Mixer to connect via USB while the PC connects to the router's wireless network. Drivers must be installed on the PC to recognize the V-Mixer. Then a sharing utility establishes the connection between the V-Mixer and PC over the wireless network, allowing remote control software to operate the V-Mixer from the PC.
Rental Highlites
Rental Highlites; diverse verhuur aanbiedingen & toevoegingen aan het complete verhuur-assortiment.
Rental Brochure 2011
Rental Brochure 2011 met compleet aanbod audio-, licht- & video-apparatuur per categorie.
Professioneel ingerichte oefenruimte te huur
Professioneel ingerichte oefenruimte te huur per dag, dagdeel of per uur.
More Related Content
Viewers also liked
Strategy and Facility Management
Guest lecture strategy for 4th year FM students at Breda University of Applied Sciences, Academy for Hotel and Facility Management.
Students are introduced to FM and hospitality issues during military out-of-area operations in Afghanistan, Kandahar Airfield
Fire Pump System Pressure Control
www.Lucky-Bet.site => Bet on Sports - 50% Deposit Bonus
www.Lucky-Bet.site/casino => Online Casino - 5000$ Welcome Bonus
www.Lucky-Bet.site/lotto247 => Lotto247 - Win Big, Live Free
www.Lucky-Bet.site/eurobet => Best European Bookmaker
www.earnperhit.com/essay => Professional academic writing
NFPA 2009 Convention Session T33
Submersible pump
The document summarizes the submersible pump. It describes how the first submersible oil pump was invented in 1928 and the first deep-well water pump was developed in the 1960s. A submersible pump consists of a centrifugal pump close-coupled to a submersible motor, pump bowl, motor assembly, discharge column, and head assembly. It is used for pumping water from deep tube wells and has applications in sewage, industrial pumping, oil wells, and sea water handling. The capacity is determined by the impeller and diffuser width, while pressure depends on impeller diameter, speed, and number of impellers. Advantages include use in deep wells and small diameters, while disadvantages include difficulty
Electric submersible pump(esp)
An electrical submersible pump (ESP) is used to increase the pressure of well fluid and push it to the surface from deeper wells. It consists of a subsurface electric motor, seal section to connect the motor to multiple centrifugal pump stages, and an electric cable. The motor turns at high rpm to power the pump stages, each with an impeller and diffuser, to boost the fluid pressure stage by stage until it reaches the surface. ESPs provide high production volumes but require high voltages and more maintenance due to wear from sand and fluids. They are advantageous for deep wells but can have issues with sand and require careful installation and operation.
Modern Facility Management
This document discusses modern facility management in the 21st century. It outlines the five cardinal rules of facility management as well as essential management sections like operational excellence, compliance, human resources, business processes, and technical services. Lean production management focuses on minimizing waste and maximizing value-added activities compared to traditional batch production systems. Successful implementation of lean requires organization-wide changes, tools like value stream mapping and standard work, and a culture of continuous improvement. Compliance with regulations and quality standards is also important for operational excellence and opening doors to international business opportunities.
Business Plan Auto Repair Shop
The document proposes opening an auto repair workshop that operates at night in Peshawar, Pakistan. It will be a partnership between four individuals. The workshop aims to provide unique overnight auto repair services, hire experienced mechanics and engineering students, and earn profits while helping people. It will target middle and high-income customers and use marketing strategies like reasonable prices, guarantees, and advertisements. The organizational plan discusses hiring staff, expanding to other cities, and creating a formal work environment. Financial projections estimate the business will be profitable within a year.
Fire Pump Engines Overview
www.Lucky-Bet.site => Bet on Sports - 50% Deposit Bonus
www.Lucky-Bet.site/casino => Online Casino - 5000$ Welcome Bonus
www.Lucky-Bet.site/lotto247 => Lotto247 - Win Big, Live Free
www.Lucky-Bet.site/eurobet => Best European Bookmaker
www.earnperhit.com/essay => Professional academic writing
Key Characteristics and Requirements of Diesel Fire Pump Engines
Feasibility study of an Automobile Repair & Service Workshop
This document provides a pre-feasibility study for an automobile repair and service workshop. It recommends establishing a workshop offering mechanical repairs, denting and painting services, wheel alignment and balancing, and high pressure cleaning. The total project cost is estimated to be 2.94 million BDT. With projected revenues and costs, the internal rate of return is estimated to be 37% with a payback period of 2.5 years, indicating a financially viable investment opportunity.
Nfpa20 standard for the installation of stationary pumps for fire protection ...
This document summarizes the key requirements and guidelines from NFPA20 regarding fire pump installation and operation. It outlines the purpose of fire pumps to provide adequate water supply for sprinklers and standpipes. It describes common pump types like horizontal split case, vertical inline, end suction, and vertical turbine. Guidelines are provided for pump sizing within 90-150% of rated capacity. Requirements are listed for accessories like gauges, valves, relief valves and fittings. The roles of jockey pumps and pressure maintenance are explained. Operation parameters like start and stop pressures are also summarized.
Sprinkler system
This document summarizes the components and operation of a sprinkler system on a ship. It describes how sprinkler heads are activated by heat and spray water over a large area. The system includes a pressurized water tank, pumps, valves, and an alarm system. When a sprinkler activates, an alarm sounds and the location is indicated. The installation has multiple sections that can be isolated. Fresh water is used initially to reduce corrosion, and cleaning is important to ensure proper operation.
Sprinkler system.
Sprinkler systems are used in commercial buildings like offices, malls, hotels, and warehouses according to building codes. They contain sprinklers and a piping system connected to a water source. There are different types of sprinkler systems including wet pipe systems which always have water in the pipes, dry pipe systems used in cold areas to prevent freezing, and deluge systems which activate based on alarms instead of heat sensors and stay open once triggered. Sprinkler systems are designed based on the building contents and are intended to control fires.
Basics of pump
This Presentation is about working principle of Pumps.Basic Presentation regarding pumps , will definitely help beginners to learn pump types , their working , their parts etc.
Fire Safety Awareness
A 1-day staff Fire Awareness workshop. Presentation is an abstract from an instructor-led session, so certain elements are not fully active; video clips were also contained in the original. A full working version can be obtained from HJA: info@hollandjones.com.
Occupational Health & Safety Presentation
Presentation to (New & Old) employees on OH & S issues. An informed package to refresh & introduce others to issues involved within the workplace. It is focused on everyday issues occuring in work. Provides an awareness of rights & responsibilities of employees & employers. It is expected that any issues unresolved will be voiced objectively as possible. The overall intent is to provide a campaign on issues in both safety and health.
Occupational Health & Safety
This presentation summarizes common library workplace hazards, Queensland workplace health and safety legislation, employer and worker obligations, and the library's workplace health and safety representatives, committee, and risk management process. Common injuries include back injuries, neck strains, and slips and trips. The legislation outlines employer duties to ensure worker health and safety. Workers must follow safety instructions and not endanger others. The library has officers, a committee, and encourages all staff to be involved in identifying hazards, assessing risks, and implementing controls. Training covers safe procedures, equipment use, hazard identification, and emergency procedures.
Viewers also liked (15)
Feasibility study of an Automobile Repair & Service Workshop
Feasibility study of an Automobile Repair & Service Workshop
Nfpa20 standard for the installation of stationary pumps for fire protection ...
Nfpa20 standard for the installation of stationary pumps for fire protection ...
More from Edwin Dijkens
Wireless control v mixer
This document shows how to wirelessly control a V-Mixer from a PC using a D-Link DIR-655 router. The router allows the V-Mixer to connect via USB while the PC connects to the router's wireless network. Drivers must be installed on the PC to recognize the V-Mixer. Then a sharing utility establishes the connection between the V-Mixer and PC over the wireless network, allowing remote control software to operate the V-Mixer from the PC.
Rental Highlites
Rental Highlites; diverse verhuur aanbiedingen & toevoegingen aan het complete verhuur-assortiment.
Rental Brochure 2011
Rental Brochure 2011 met compleet aanbod audio-, licht- & video-apparatuur per categorie.
Professioneel ingerichte oefenruimte te huur
Professioneel ingerichte oefenruimte te huur per dag, dagdeel of per uur.
More from Edwin Dijkens (6)
Flyer PSME
- 1. Gebruikt u draadloze microfoons? Het kan zijn dat deze na 1 januari 2013 storing ondervinden. Wat is er aan de hand? De huidige frequenties 790 tot 862 MHz gaan gebruikt worden voor mobiel internet. Voor de gebruikers van draadloze microfoons komen binnenkort nieuwe frequenties beschikbaar. Ook het landelijk kanaal 63 gaat verdwijnen. Gebruikers van dit kanaal verhuizen naar de kanalen 39, 40 en 41 (614 – 638 MHz) die samen landelijke dekking bieden. We raden gebruikers en leveranciers aan na te gaan welke frequenties hun huidige en nieuw aan te schaffen apparatuur gebruikt. Soms kunnen apparaten geüpdatet worden naar andere frequenties. Soms moet apparatuur vervangen worden. Uw leverancier kan u vertellen of dit het geval is. Lees meer over oorzaak, gevolg en beschikbare frequenties op www.agentschaptelecom.nl