1
About 3 TREES
3TREES is a high-end paint brand from China, founded in 2002. Their products include interior
and exterior wall paints, waterproof products, insulation materials, industrial paints, floor coatings,
new home decoration materials, and auxiliary materials. 3TREES stands at the top among global high-
end paint companies, and their products have received international environmental certifications.
The headquarters of 3TREES is located in Putian, Fujian Province, with brand centers in Shanghai,
Guangzhou, Beijing, and other major cities. Their production bases are spread across China and have
been rated as national-level “green factories.”
3TREES provides interior and exterior paints, kitchen and bathroom waterproofing paints,
indoor and outdoor wood paints, and adhesives. Their products are guaranteed to be odorless and
allow for moving in within 8 hours after application.
2
About 3 Trees
3TREES သည် တရုတ်နိုင်ငံမှ အဆင့်မြင့်ဆေးအမှတ်တံဆိပ်တစ်ခုဖြစ်ပြီး 2002 ခုနှစ်တွင် စတင်တည်ထောင်ခဲ့
သည်။ 3 trees ၏ထုတ်ကုန်များတွင် အတွင်းပိုင်းနှင့် ပြင်ပနံရံဆေးများ၊ ရေစိုခံထုတ်ကုန်များ၊ အပူကာပစ္စည်းများ၊ စက်မှု
လုပ်ငန်းသုံးဆေးများ၊ ကြမ်းခင်းဆေးများ၊ အိမ်အလှဆင်ပစ္စည်းအသစ်များနှင့် အထောက်အကူပစ္စည်းများ ပါဝင်သည်။
3TREES သည် ကမ္ဘာလုံးဆိုင်ရာ အဆင့်မြင့်ဆေးပစ္စည်းကုမ္ပဏီများစာရင်းတွင် ထိပ်တန်းတွင် ရပ်တည်နေပြီး ၎င်းတို့၏
ထုတ်ကုန်များသည် အပြည်ပြည်ဆိုင်ရာ ပတ်ဝန်းကျင်ဆိုင်ရာ အာမခံချက်များကို ရရှိထားသည်။
3TREES ၏ ဌာနချုပ်သည် Fujian ပြည်နယ် Putian တွင် ရှိပြီး ရှန်ဟိုင်း၊ ဂွမ်ကျ ိုး၊ ပေကျင်းနှင့် အခြားမြို့ကြီးများတွင်
အမှတ်တံဆိပ်စင်တာများရှိသည်။ 3 trees ၏ ထုတ်လုပ်ရေးအခြေစိုက်စခန်းများသည် တရုတ်နိုင်ငံအနှံ့တွင် တည်ရှိပြီး
“
အမျ ိုးသားအဆင့် National level green factory” ဟု အဆင့်သတ်မှတ်ထားသည်။
3TREES သည် အိမ်တွင်းနှင့် အိမ်ပြင်ဆေးများ၊ မီးဖိုချောင်နှင့် ရေချ ိုးခန်းရေစိုခံဆေးများ၊ အိမ်တွင်းနှင့် အိမ်ပြင်သစ်သား
ဆေးများနှင့် ကော်များကို ပံ့ပိုးပေးသည်။ 3 trees ၏ ထုတ်ကုန်များသည် အနံ ့
မရှိဘဲ ဆေးသုတ်ပြီး ၈ နာရီအတွင်း
အိမ်သို့ ရွှေ့ပြောင်းနိုင်ရန် အာမခံထားသော Brand တစ်ခုဖြစ်သည်။
3TREES သည် ကမ္ဘာလုံးဆိုင်ရာ အဆင့်မြင့်ဆေးပစ္စည်းကုမ္ပဏီများစာရင်းတွင် ထိပ်တန်းတွင် ရပ်တည်နေပြီး ၎င်းတို့၏
ထုတ်ကုန်များသည် အပြည်ပြည်ဆိုင်ရာ ပတ်ဝန်းကျင်ဆိုင်ရာ အာမခံချက်များကို ရရှိထားသည်။
3
4
Specifications
345g*24/set
Scope of Application
Applies to most substrate materials: wood, stone, metal, ceramics, glass, plastics, rubber,
plaster board, fiber board, various artificial materials, artwork, etc. Applies widely to construction,
advertising, decoration and manufacturing.
Product Features
Quick drying, highly adhesive, easy to apply
5
Application Instructions
1.Clean the substrate surface, until it is free of oil, stain and dust;
2.Cut the top of the hose, use the glue mouth to pierce the inner aluminum foil, cut the
mouth 45° into desired size and shape, put the mouth onto the hose and then connect the
hose to the gun;
3.Apply glue to the substrate surface in dots, stripes or zigzags. Single-side application is
sufficient.
Dry Gluing
Apply glue to one surface, press the two surfaces together, pull them apart, leave them for
3-5 minutes (no longer than 10 minutes), and then press them together again, to achieve
quick positioning.
Wet Gluing
Apply glue to one surface, press the two surfaces together, and immediately apply tape or
clip; remove the tape or clip when primary adhesion is achieved (in about 24 hours).
6
Expiration Date
This product can be stored for 12 months in a cool, dry place, below 30°C.
Attention
Prevent accidental eating by children; avoid contact with skin or eye;
Keep away from flammables; application shall be made in well-ventilated place;
Avoid application in high-temperature environments, such as in metal roofs or heat pipes; not
applicable to long-soaked, oil leaking or plasticizer materials;
This product, in all its technical aspects, is made strictly according to standards. However, due to
varying climates and way of use, a performance test should be conducted before formal use to
achieve desired effect.
7
Product Profile:
The 3TREES Zerolite Interior Wall Emulsion Paint is a cost-effective interior wall coating
with excellent environmental property, outstanding application performance, high coverage,
excellent hiding power and strong scrub resistance. At the same time, it also has the
characteristics of good adhesion, easy application, high solid content and alkali resistance.
Product use:
It is widely used in the interior wall decoration and protection of villas, hotels,
hospitals, office buildings and homes.
8
Product Nature
Main ingredients: Emulsion, pigment, filler, auxiliaries and water.
Product Features
1.Large coating area;
2.Excellent whiteness;
3.Easy application;
4.Excellent hiding power.
Application instructions: The surface must be clean, dry, neutral, flat,
and free of floating ash, oil stains and foreign substances. Water-leaking
positions must undergo waterproof treatment. Before coating, the surface
should be polished and leveled to ensure that the surface humidity of the pre-
coated substrate is <10% and the pH value is <10. Paint surface effect will
depend on substrate flatness.
Application conditions: Wall temperature ≥ 5 , and humidity ≤ 85%.
℃
Application method: Brushing, rolling, or spraying.
9
Recoating time: Surface drying 30-60 minutes, hard drying 2 hours, and
recoating interval 2-3 hours (which may be duly extended under low-temperature
conditions)
Maintenance time: 7 days, which may be duly extended under low-
temperature conditions to obtain a solid film effect.
Tool cleaning: After or between applications, please clean the tools with clean
water in time so as to prolong tool life.
Attention
Safety and Health Tips:
1.Please cover the paint tank tightly and keep it out of children’s reach;
2.Please operate the paint in a well-ventilated environment and wear protective
masks when polishing walls;
3.When applying the paint, please follow local operation specifications and wear
necessary protective and labor protection items, such as protective glasses, gloves
and professional spraying clothes;
4.If the paint is accidentally splashed into the eye, please immediately rinse with
plenty of water and go to hospital for treatment;
10
3TREES Excellent Tile Gum
This is a single-component product treating the back side of tiles. It is
made of a special single-component polymer emulsion, added with
various function modifiers. It sticks well to both sides and, used together
with 3TREES tile adhesive, can well solve hollows and dropping in low
water absorption tiles and boost the overall solidity.
11
The 3TREES Joint Master is a two-component epoxy adhesive made from strong
fibers. The product features strong adhesion and good toughness and can effectively
prevent bonding materials from cracking. At the same time, it also has the
outstanding advantages of quick setting, anti-running, no sagging, easy polishing, no
yellowing, and good chemical resistance. The product is easy to apply and has reliable
quality.
12
Scope of Application
This product is widely used in the crack filling and joint bonding of all kinds of
indoor and outdoor construction and decoration projects. It not only solves
the problem of cracking in traditional materials, but also saves labor and
material costs in later-stage project maintenance and improves project quality
and image. For example:
1.Gap bonding and repair for wood, masonry, gypsum board, and silica gel
calcium board materials;
2.Gap bonding and repair for wood, ceilings, concrete (stone) walls and floors;
3.Adhesive for installation of dolomite and large wall tiles;
4.Sealing of crack repair agents required for various grouting projects;
5.Roof mending, and bonding of plastic and iron pieces.
13
Application Process
1.Mix the main material and curing agent in a strict 2:1 ratio.
2.Scrape the fully and evenly mixed material directly into the joint to be bonded and make sure
to apply solidly and flatly (fill up fully and use the angle end of the scraper to scrape back and
forth at the joint location. There should be no hollowing.)
3.Scrape the product into an even 5-8cm-wide and >2 mm-thick film on the surface of the joint,
and press a mesh cloth or straw belt with a scraper to get better strength;
4.After the joint master dries and solidified, apply one layer of interface agent or liquid linen on
the surface as the sealing coating to prevent the putty powder from hollowing, falling off and
yellowing.
5.The best strength forms within one week after ≤ 3 hours of surface drying and ≤ 24 hours of
hard drying at a room temperature of 25℃
6.For a coating 4cm wide and 2mm thick over a 0.3m-wide and 0.3cm-deep conventional joint,
the theoretical coating consumption is 10m/kg (for reference only, actual consumption depends
on the substrate)
14
Attention
1.Store in a cool, well-ventilated place.
2.Keep away from heat sources, sparks, open flames and hot surfaces: 1) after opening the storage bucket, blend the
main material and curing agent evenly respectively before mixing them together, and seal the bucket tightly after use;
and 2) mix the main material and curing agent in strict accordance with the specified ratio. Otherwise, it may cause the
joint master to be wet for a long time, seep color or crack.
3.If the joint is too small, make sure to use a scraper or other tools to cut a 3-4mm-wide opening before applying the
product.
4.To apply the product on calcium silicate board or gypsum board joints, make sure to clear the powder and dirt on the
inside and surface of the joint, mix the product well and apply it several rounds until the dust is completely fused with
the product.
5.For application on lime walls or soft substrates, make sure to remove the surface and clear the dust before applying the
product.
6.Make sure to use the supporting products in the brand package. The mixed product should be used up within 30
minutes, while those not must be sealed immediately after opening.
7.The suitable temperature is 5 - 35 , and air humidity is ≤85%. Please keep the environment ventilated and dry
℃ ℃
during the application process. Keep the container closed.
15
3TREES Corner Bead
This product protects and strengthens the most vulnerable part of mortar. It
consolidates the wall and keeps internal/external corners straight, being an indispensable
auxiliary material in home decoration.
Product Features
1.High PVC content, resistance to corrosion, impact and aging;
2.Both elastic and solid, highly plastical, and hard to deform or break;
3.An excellent whiteness to blend with wall;
4.External corner < 90°, internal corner > 90°, stay close to corners and increase
resistance to impact;
5.Easy to install; increase efficiency by 2-5 times.
16
Instructions
1.Level the corner and wall surface with mixed corner protector, keep the plaster in a
proper thickness;
2.Stick the product close to corner, press until the plaster flows out from holes, and
scrap the plaster;
3.After drying, apply putty and scrap, and after natural drying, polish slightly with
sandpaper;
4.Finally, apply paint or decorative materials like diatom mud.
17
3TREES Healthy Home Masking Film
This product is made from quality raw materials using advanced techniques. The tape is highly
adhesive without dropping or leaving residue; the film is of a thicker design to prevent leakage,
increase coverage and boost efficiency.
Product Features
1.Thicker film, high adhesion to paint, little leakage, full protection
2.Highly adhesive tape, little dropping or residue
3.Easy to apply, color separation and masking made into one
18

3 trees paints specification(Emulsion Panit & tool.pptx

  • 1.
    1 About 3 TREES 3TREESis a high-end paint brand from China, founded in 2002. Their products include interior and exterior wall paints, waterproof products, insulation materials, industrial paints, floor coatings, new home decoration materials, and auxiliary materials. 3TREES stands at the top among global high- end paint companies, and their products have received international environmental certifications. The headquarters of 3TREES is located in Putian, Fujian Province, with brand centers in Shanghai, Guangzhou, Beijing, and other major cities. Their production bases are spread across China and have been rated as national-level “green factories.” 3TREES provides interior and exterior paints, kitchen and bathroom waterproofing paints, indoor and outdoor wood paints, and adhesives. Their products are guaranteed to be odorless and allow for moving in within 8 hours after application.
  • 2.
    2 About 3 Trees 3TREESသည် တရုတ်နိုင်ငံမှ အဆင့်မြင့်ဆေးအမှတ်တံဆိပ်တစ်ခုဖြစ်ပြီး 2002 ခုနှစ်တွင် စတင်တည်ထောင်ခဲ့ သည်။ 3 trees ၏ထုတ်ကုန်များတွင် အတွင်းပိုင်းနှင့် ပြင်ပနံရံဆေးများ၊ ရေစိုခံထုတ်ကုန်များ၊ အပူကာပစ္စည်းများ၊ စက်မှု လုပ်ငန်းသုံးဆေးများ၊ ကြမ်းခင်းဆေးများ၊ အိမ်အလှဆင်ပစ္စည်းအသစ်များနှင့် အထောက်အကူပစ္စည်းများ ပါဝင်သည်။ 3TREES သည် ကမ္ဘာလုံးဆိုင်ရာ အဆင့်မြင့်ဆေးပစ္စည်းကုမ္ပဏီများစာရင်းတွင် ထိပ်တန်းတွင် ရပ်တည်နေပြီး ၎င်းတို့၏ ထုတ်ကုန်များသည် အပြည်ပြည်ဆိုင်ရာ ပတ်ဝန်းကျင်ဆိုင်ရာ အာမခံချက်များကို ရရှိထားသည်။ 3TREES ၏ ဌာနချုပ်သည် Fujian ပြည်နယ် Putian တွင် ရှိပြီး ရှန်ဟိုင်း၊ ဂွမ်ကျ ိုး၊ ပေကျင်းနှင့် အခြားမြို့ကြီးများတွင် အမှတ်တံဆိပ်စင်တာများရှိသည်။ 3 trees ၏ ထုတ်လုပ်ရေးအခြေစိုက်စခန်းများသည် တရုတ်နိုင်ငံအနှံ့တွင် တည်ရှိပြီး “ အမျ ိုးသားအဆင့် National level green factory” ဟု အဆင့်သတ်မှတ်ထားသည်။ 3TREES သည် အိမ်တွင်းနှင့် အိမ်ပြင်ဆေးများ၊ မီးဖိုချောင်နှင့် ရေချ ိုးခန်းရေစိုခံဆေးများ၊ အိမ်တွင်းနှင့် အိမ်ပြင်သစ်သား ဆေးများနှင့် ကော်များကို ပံ့ပိုးပေးသည်။ 3 trees ၏ ထုတ်ကုန်များသည် အနံ ့ မရှိဘဲ ဆေးသုတ်ပြီး ၈ နာရီအတွင်း အိမ်သို့ ရွှေ့ပြောင်းနိုင်ရန် အာမခံထားသော Brand တစ်ခုဖြစ်သည်။ 3TREES သည် ကမ္ဘာလုံးဆိုင်ရာ အဆင့်မြင့်ဆေးပစ္စည်းကုမ္ပဏီများစာရင်းတွင် ထိပ်တန်းတွင် ရပ်တည်နေပြီး ၎င်းတို့၏ ထုတ်ကုန်များသည် အပြည်ပြည်ဆိုင်ရာ ပတ်ဝန်းကျင်ဆိုင်ရာ အာမခံချက်များကို ရရှိထားသည်။
  • 3.
  • 4.
    4 Specifications 345g*24/set Scope of Application Appliesto most substrate materials: wood, stone, metal, ceramics, glass, plastics, rubber, plaster board, fiber board, various artificial materials, artwork, etc. Applies widely to construction, advertising, decoration and manufacturing. Product Features Quick drying, highly adhesive, easy to apply
  • 5.
    5 Application Instructions 1.Clean thesubstrate surface, until it is free of oil, stain and dust; 2.Cut the top of the hose, use the glue mouth to pierce the inner aluminum foil, cut the mouth 45° into desired size and shape, put the mouth onto the hose and then connect the hose to the gun; 3.Apply glue to the substrate surface in dots, stripes or zigzags. Single-side application is sufficient. Dry Gluing Apply glue to one surface, press the two surfaces together, pull them apart, leave them for 3-5 minutes (no longer than 10 minutes), and then press them together again, to achieve quick positioning. Wet Gluing Apply glue to one surface, press the two surfaces together, and immediately apply tape or clip; remove the tape or clip when primary adhesion is achieved (in about 24 hours).
  • 6.
    6 Expiration Date This productcan be stored for 12 months in a cool, dry place, below 30°C. Attention Prevent accidental eating by children; avoid contact with skin or eye; Keep away from flammables; application shall be made in well-ventilated place; Avoid application in high-temperature environments, such as in metal roofs or heat pipes; not applicable to long-soaked, oil leaking or plasticizer materials; This product, in all its technical aspects, is made strictly according to standards. However, due to varying climates and way of use, a performance test should be conducted before formal use to achieve desired effect.
  • 7.
    7 Product Profile: The 3TREESZerolite Interior Wall Emulsion Paint is a cost-effective interior wall coating with excellent environmental property, outstanding application performance, high coverage, excellent hiding power and strong scrub resistance. At the same time, it also has the characteristics of good adhesion, easy application, high solid content and alkali resistance. Product use: It is widely used in the interior wall decoration and protection of villas, hotels, hospitals, office buildings and homes.
  • 8.
    8 Product Nature Main ingredients:Emulsion, pigment, filler, auxiliaries and water. Product Features 1.Large coating area; 2.Excellent whiteness; 3.Easy application; 4.Excellent hiding power. Application instructions: The surface must be clean, dry, neutral, flat, and free of floating ash, oil stains and foreign substances. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre- coated substrate is <10% and the pH value is <10. Paint surface effect will depend on substrate flatness. Application conditions: Wall temperature ≥ 5 , and humidity ≤ 85%. ℃ Application method: Brushing, rolling, or spraying.
  • 9.
    9 Recoating time: Surfacedrying 30-60 minutes, hard drying 2 hours, and recoating interval 2-3 hours (which may be duly extended under low-temperature conditions) Maintenance time: 7 days, which may be duly extended under low- temperature conditions to obtain a solid film effect. Tool cleaning: After or between applications, please clean the tools with clean water in time so as to prolong tool life. Attention Safety and Health Tips: 1.Please cover the paint tank tightly and keep it out of children’s reach; 2.Please operate the paint in a well-ventilated environment and wear protective masks when polishing walls; 3.When applying the paint, please follow local operation specifications and wear necessary protective and labor protection items, such as protective glasses, gloves and professional spraying clothes; 4.If the paint is accidentally splashed into the eye, please immediately rinse with plenty of water and go to hospital for treatment;
  • 10.
    10 3TREES Excellent TileGum This is a single-component product treating the back side of tiles. It is made of a special single-component polymer emulsion, added with various function modifiers. It sticks well to both sides and, used together with 3TREES tile adhesive, can well solve hollows and dropping in low water absorption tiles and boost the overall solidity.
  • 11.
    11 The 3TREES JointMaster is a two-component epoxy adhesive made from strong fibers. The product features strong adhesion and good toughness and can effectively prevent bonding materials from cracking. At the same time, it also has the outstanding advantages of quick setting, anti-running, no sagging, easy polishing, no yellowing, and good chemical resistance. The product is easy to apply and has reliable quality.
  • 12.
    12 Scope of Application Thisproduct is widely used in the crack filling and joint bonding of all kinds of indoor and outdoor construction and decoration projects. It not only solves the problem of cracking in traditional materials, but also saves labor and material costs in later-stage project maintenance and improves project quality and image. For example: 1.Gap bonding and repair for wood, masonry, gypsum board, and silica gel calcium board materials; 2.Gap bonding and repair for wood, ceilings, concrete (stone) walls and floors; 3.Adhesive for installation of dolomite and large wall tiles; 4.Sealing of crack repair agents required for various grouting projects; 5.Roof mending, and bonding of plastic and iron pieces.
  • 13.
    13 Application Process 1.Mix themain material and curing agent in a strict 2:1 ratio. 2.Scrape the fully and evenly mixed material directly into the joint to be bonded and make sure to apply solidly and flatly (fill up fully and use the angle end of the scraper to scrape back and forth at the joint location. There should be no hollowing.) 3.Scrape the product into an even 5-8cm-wide and >2 mm-thick film on the surface of the joint, and press a mesh cloth or straw belt with a scraper to get better strength; 4.After the joint master dries and solidified, apply one layer of interface agent or liquid linen on the surface as the sealing coating to prevent the putty powder from hollowing, falling off and yellowing. 5.The best strength forms within one week after ≤ 3 hours of surface drying and ≤ 24 hours of hard drying at a room temperature of 25℃ 6.For a coating 4cm wide and 2mm thick over a 0.3m-wide and 0.3cm-deep conventional joint, the theoretical coating consumption is 10m/kg (for reference only, actual consumption depends on the substrate)
  • 14.
    14 Attention 1.Store in acool, well-ventilated place. 2.Keep away from heat sources, sparks, open flames and hot surfaces: 1) after opening the storage bucket, blend the main material and curing agent evenly respectively before mixing them together, and seal the bucket tightly after use; and 2) mix the main material and curing agent in strict accordance with the specified ratio. Otherwise, it may cause the joint master to be wet for a long time, seep color or crack. 3.If the joint is too small, make sure to use a scraper or other tools to cut a 3-4mm-wide opening before applying the product. 4.To apply the product on calcium silicate board or gypsum board joints, make sure to clear the powder and dirt on the inside and surface of the joint, mix the product well and apply it several rounds until the dust is completely fused with the product. 5.For application on lime walls or soft substrates, make sure to remove the surface and clear the dust before applying the product. 6.Make sure to use the supporting products in the brand package. The mixed product should be used up within 30 minutes, while those not must be sealed immediately after opening. 7.The suitable temperature is 5 - 35 , and air humidity is ≤85%. Please keep the environment ventilated and dry ℃ ℃ during the application process. Keep the container closed.
  • 15.
    15 3TREES Corner Bead Thisproduct protects and strengthens the most vulnerable part of mortar. It consolidates the wall and keeps internal/external corners straight, being an indispensable auxiliary material in home decoration. Product Features 1.High PVC content, resistance to corrosion, impact and aging; 2.Both elastic and solid, highly plastical, and hard to deform or break; 3.An excellent whiteness to blend with wall; 4.External corner < 90°, internal corner > 90°, stay close to corners and increase resistance to impact; 5.Easy to install; increase efficiency by 2-5 times.
  • 16.
    16 Instructions 1.Level the cornerand wall surface with mixed corner protector, keep the plaster in a proper thickness; 2.Stick the product close to corner, press until the plaster flows out from holes, and scrap the plaster; 3.After drying, apply putty and scrap, and after natural drying, polish slightly with sandpaper; 4.Finally, apply paint or decorative materials like diatom mud.
  • 17.
    17 3TREES Healthy HomeMasking Film This product is made from quality raw materials using advanced techniques. The tape is highly adhesive without dropping or leaving residue; the film is of a thicker design to prevent leakage, increase coverage and boost efficiency. Product Features 1.Thicker film, high adhesion to paint, little leakage, full protection 2.Highly adhesive tape, little dropping or residue 3.Easy to apply, color separation and masking made into one
  • 18.