The Micro, Small and Medium Enterprises (MSME) sector plays worldwide an important and significant catalytic role for economic development through enterprise creation and employment generation. The MSME sector in India covers a wide spectrum of economic activities. With more than 44.7 million enterprises, this sector generates more than 100 million jobs, next only to agriculture sector.
Promoting Sustainable Development of MSMEs - FMCTheBambooLink
Sustainability has already taken centre stage of development globally and Govt. of India has made several commitments at national and international platforms. Make in India with Zero Defect & Zero Effect initiatives of the Government express the zeal to balance economic growth with sustainability and social inclusion. All the sectors of economy viz. agriculture, manufacturing and services will need to contribute in this collective endeavour of nation building.
India @ G20 : A Primer on Priorities
Economic growth, industrialization, infrastructure and access to energy provide the foundations of development
for any growing economy.
‘Building Resilience’ is the prime objective of the G20 and with this in mind this grouping has set itself the
task of increasing the stability and resilience of economies, and thus of the global economy as a whole. Global
economic growth had taken quite a blow in recent times and therefore become much weaker overall than it
did after previous economic downturns. As a result, public and private debt across various regions, Central
banks’ interest rates got negatively impacted in many G20 countries. Structural reforms in G20 countries, with
focus on fiscal and monetary policies are the key to stability and long-term sustainability.
Promoting Sustainable Development of MSMEs - FMCTheBambooLink
Sustainability has already taken centre stage of development globally and Govt. of India has made several commitments at national and international platforms. Make in India with Zero Defect & Zero Effect initiatives of the Government express the zeal to balance economic growth with sustainability and social inclusion. All the sectors of economy viz. agriculture, manufacturing and services will need to contribute in this collective endeavour of nation building.
India @ G20 : A Primer on Priorities
Economic growth, industrialization, infrastructure and access to energy provide the foundations of development
for any growing economy.
‘Building Resilience’ is the prime objective of the G20 and with this in mind this grouping has set itself the
task of increasing the stability and resilience of economies, and thus of the global economy as a whole. Global
economic growth had taken quite a blow in recent times and therefore become much weaker overall than it
did after previous economic downturns. As a result, public and private debt across various regions, Central
banks’ interest rates got negatively impacted in many G20 countries. Structural reforms in G20 countries, with
focus on fiscal and monetary policies are the key to stability and long-term sustainability.
Bala Vikasa is positioning itself as a key player in this new dynamic of the Indian development story. Social accountability, ethical business and sustainable development are very important for business success today. Contemporary business is more than ever before evaluating its performance and deriving competitive advantage from tangible social attributes being prevalent throughout its business cycle. Companies are critically appraised by consumers, stakeholders, communities and government based on the demonstration of sustainability in their business performance.
Business today is seeking to promote its brand and social visibility, and engage with stakeholders in seeking social licenses. It is strategizing its corporate social responsibility aimed at business operations sustainability. However, business is yet to manifest its vital role as a partner with the community for social development.
During the webinar, the speakers promoted a set of training materials that is freely available for those interested in learning more about the implementation of NDCs in the agriculture sector in Africa.
More info about the webinar: https://ccafs.cgiar.org/implementing-ndcs-agriculture-sector-across-africa-what-directions-capacity-building#.XxaxH_gzbfZ
A Study on Sustainability and Coping Ability of SHGS Members with Special Ref...ijtsrd
Micro finance in general is a practice of providing the poor with credit, savings and insurance facilities to set up or to expand Income generating activities relating to agriculture and its allied activities and non farm sector and thereby reducing poverty. In India, the history of Micro Finance, rural credit, and poverty alleviation are inextricably interwoven. Micro Finance has turned out to be a very useful development assistance product. It reached millions of poor people and emerged as a revolution. Over the past two decades of the Bank’s association, India’s SHG movement has evolved from small savings and credit groups that sought to empower poor rural women, into one of the world’s largest institutional platforms of the poor. Today, 67 million Indian women are members of 6 million SHGs. Presently SKDRDP is actively involved in implementing the financial inclusion plan of the government of India by working as Banking Correspondent and Business Facilitator BC and BF in all the areas of its operation. Under the programme SKDRDP is promoting Self Help groups enabling the poor people in the remote villages to access banking facilities at their door steps. The paper is an attempt to understand the progress of SHGs members after taking micro finance service from SKDRDP. Through the current study the researcher has made an attempt to analyze the perception of selected Self help group members on Micro Finance Programme, the challenges they faced and the steps taken by SKDRDP to overcome the same due to the hit of COVID 19 and the support they got for their growth to survival. Praveena D | Dr. Ravi M N "A Study on Sustainability & Coping Ability of SHGS Members with Special Reference to SKDRDP Micro Finance Programme" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-1 , December 2020, URL: https://www.ijtsrd.com/papers/ijtsrd38086.pdf Paper URL : https://www.ijtsrd.com/management/marketing-management/38086/a-study-on-sustainability-and-coping-ability-of-shgs-members-with-special-reference-to-skdrdp-micro-finance-programme/praveena-d
Responsible Banking special focus on Micro, Medium Enterprise.pdfTheBambooLink
This book provides a snapshot of the role and significance of the financial institutions (FIs) in fostering Business Responsibility (BR), particularly in the context of MSMEs in India, and is in line with the National Voluntary Guidelines on Social, Environmental and Economic Responsibilities of Business released by the Ministry of Corporate Affairs. Responsible banking lays stress on the environmental and social consequences of projects and financial products, rather than just the economic and financial impact. The study was conducted with the objective of understanding the extent and ways in which the international and national FIs foster BR among enterprises through responsible lending and also map international and national BR instruments related to FIs for sustainable lending.
Income under the head of “House property”
2.Income under the head of “profit and gain of business or profession”
3.Income under the head of “Capital Gain”
4.Income under the head of “Income from other sources”
Scoping study on the State of the Art of Natural Capital Incorporation in Investment and Lending Decision Making
Report can be found here: http://www.unepfi.org/fileadmin/documents/NCD-NaturalResourceRisksScopingStudy.pdf
The topic was delivered by Shri B.S. Mubarak IFS, Director (South) – Ministry of External Affairs, Government of India, Delhi | Former Consul General of India in Saudi Arabia.
Green Banking India’s Vision for Sustainable Finance in G20ijtsrd
In recent years global economies have realised that climate change has the worst impacts at the global level. Every country is experiencing the impact of climate change. Thus, a vision for long run could be the only way to sustain and develop holistically. The G20 summit in 2021 incorporated the concept of Sustainable Finance or the ways to make finance and banking sector more focused towards the sustainable business processes and models. The theme of upcoming G20 summit 2023 in India Vasudhaiv Kutumbakam or One earth, One family, One future clearly shows how much we need to focus on sustainable ways for development. Green Banking is one such way through which sustainable finance could be achieved. Green banking is the way of incorporating sustainable and green methods in banking practices to reduce carbon footprints of banks so that environment could be preserved and sustainable development could be ensured. Banks are adopting sustainable ways of financing and through other green methods are ensuring that there is no harm to the environment. This paper throws light on Indias vision for sustainable finance in G20 and green banking would help in achieving it. Green banking, through innovative and sustainable business models and financially supporting sustainable businesses, would be a key facilitator of sustainable development. Prof. Mohd. Hanif | Manisha Joshi "Green Banking: India’s Vision for Sustainable Finance in G20" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-7 | Issue-3 , June 2023, URL: https://www.ijtsrd.com.com/papers/ijtsrd57525.pdf Paper URL: https://www.ijtsrd.com.com/management/accounting-and-finance/57525/green-banking-india’s-vision-for-sustainable-finance-in-g20/prof-mohd-hanif
Promoting Responsible Business by BMOs - Issue II - FMCTheBambooLink
For the micro, small and medium enterprises (MSMEs), the backbone of both developing as well as developed nations, the challenge is how to promote these nearly 50 million MSMEs towards “Zero Defect Zero Effect” production. Interestingly, a significant proportion of these MSMEs are represented by their industry associations and Chambers of Commerce also called Business Membership Organizations (BMOs). BMOs being the most trusted ally of MSMEs, are best suited to promote the concept of “Responsible Business” in a balanced manner among millions of MSMEs in India.
Working Together Works – Cluster Case StudiesTheBambooLink
This book is a compilation of 19 case studies of cluster initiatives. It provides an insight into diverse cluster development approaches that can be undertaken with as much variety of objectives and outcomes. The idea is to capture the diversity of clusters, approaches,implementation agencies and objectives to help the reader draw one’s own lessons and conclusions. The case studies include a wide range of products among micro enterprises such as handlooms items, brass & bell metal, traditional footwear, crochet & lace work, coir products, hand tools etc.
State Cluster Development Policy Road MapTheBambooLink
To develop a roadmap to promote Cluster development initiatives in the state of Madhya Pradesh with a view to support and foster development of Micro, Small & Medium Enterprises (MSME) sector. There is a broad consensus that many countries in the world as well as many states in India have benefitted through cluster development approach. However, in case of Madhya Pradesh, success story of cluster initiatives is minimal. Atal Bihari Vajpayee Institute of Good Governance and Policy Analysis (AIGGPA) commissioned the study to examine the status of Cluster development initiatives in the state and to develop policy road map for cluster initiatives in association with Foundation of MSME Cluster (FMC), New Delhi.
More Related Content
Similar to Financing Sustainable Production among MSME Clusters - FMC
Bala Vikasa is positioning itself as a key player in this new dynamic of the Indian development story. Social accountability, ethical business and sustainable development are very important for business success today. Contemporary business is more than ever before evaluating its performance and deriving competitive advantage from tangible social attributes being prevalent throughout its business cycle. Companies are critically appraised by consumers, stakeholders, communities and government based on the demonstration of sustainability in their business performance.
Business today is seeking to promote its brand and social visibility, and engage with stakeholders in seeking social licenses. It is strategizing its corporate social responsibility aimed at business operations sustainability. However, business is yet to manifest its vital role as a partner with the community for social development.
During the webinar, the speakers promoted a set of training materials that is freely available for those interested in learning more about the implementation of NDCs in the agriculture sector in Africa.
More info about the webinar: https://ccafs.cgiar.org/implementing-ndcs-agriculture-sector-across-africa-what-directions-capacity-building#.XxaxH_gzbfZ
A Study on Sustainability and Coping Ability of SHGS Members with Special Ref...ijtsrd
Micro finance in general is a practice of providing the poor with credit, savings and insurance facilities to set up or to expand Income generating activities relating to agriculture and its allied activities and non farm sector and thereby reducing poverty. In India, the history of Micro Finance, rural credit, and poverty alleviation are inextricably interwoven. Micro Finance has turned out to be a very useful development assistance product. It reached millions of poor people and emerged as a revolution. Over the past two decades of the Bank’s association, India’s SHG movement has evolved from small savings and credit groups that sought to empower poor rural women, into one of the world’s largest institutional platforms of the poor. Today, 67 million Indian women are members of 6 million SHGs. Presently SKDRDP is actively involved in implementing the financial inclusion plan of the government of India by working as Banking Correspondent and Business Facilitator BC and BF in all the areas of its operation. Under the programme SKDRDP is promoting Self Help groups enabling the poor people in the remote villages to access banking facilities at their door steps. The paper is an attempt to understand the progress of SHGs members after taking micro finance service from SKDRDP. Through the current study the researcher has made an attempt to analyze the perception of selected Self help group members on Micro Finance Programme, the challenges they faced and the steps taken by SKDRDP to overcome the same due to the hit of COVID 19 and the support they got for their growth to survival. Praveena D | Dr. Ravi M N "A Study on Sustainability & Coping Ability of SHGS Members with Special Reference to SKDRDP Micro Finance Programme" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-1 , December 2020, URL: https://www.ijtsrd.com/papers/ijtsrd38086.pdf Paper URL : https://www.ijtsrd.com/management/marketing-management/38086/a-study-on-sustainability-and-coping-ability-of-shgs-members-with-special-reference-to-skdrdp-micro-finance-programme/praveena-d
Responsible Banking special focus on Micro, Medium Enterprise.pdfTheBambooLink
This book provides a snapshot of the role and significance of the financial institutions (FIs) in fostering Business Responsibility (BR), particularly in the context of MSMEs in India, and is in line with the National Voluntary Guidelines on Social, Environmental and Economic Responsibilities of Business released by the Ministry of Corporate Affairs. Responsible banking lays stress on the environmental and social consequences of projects and financial products, rather than just the economic and financial impact. The study was conducted with the objective of understanding the extent and ways in which the international and national FIs foster BR among enterprises through responsible lending and also map international and national BR instruments related to FIs for sustainable lending.
Income under the head of “House property”
2.Income under the head of “profit and gain of business or profession”
3.Income under the head of “Capital Gain”
4.Income under the head of “Income from other sources”
Scoping study on the State of the Art of Natural Capital Incorporation in Investment and Lending Decision Making
Report can be found here: http://www.unepfi.org/fileadmin/documents/NCD-NaturalResourceRisksScopingStudy.pdf
The topic was delivered by Shri B.S. Mubarak IFS, Director (South) – Ministry of External Affairs, Government of India, Delhi | Former Consul General of India in Saudi Arabia.
Green Banking India’s Vision for Sustainable Finance in G20ijtsrd
In recent years global economies have realised that climate change has the worst impacts at the global level. Every country is experiencing the impact of climate change. Thus, a vision for long run could be the only way to sustain and develop holistically. The G20 summit in 2021 incorporated the concept of Sustainable Finance or the ways to make finance and banking sector more focused towards the sustainable business processes and models. The theme of upcoming G20 summit 2023 in India Vasudhaiv Kutumbakam or One earth, One family, One future clearly shows how much we need to focus on sustainable ways for development. Green Banking is one such way through which sustainable finance could be achieved. Green banking is the way of incorporating sustainable and green methods in banking practices to reduce carbon footprints of banks so that environment could be preserved and sustainable development could be ensured. Banks are adopting sustainable ways of financing and through other green methods are ensuring that there is no harm to the environment. This paper throws light on Indias vision for sustainable finance in G20 and green banking would help in achieving it. Green banking, through innovative and sustainable business models and financially supporting sustainable businesses, would be a key facilitator of sustainable development. Prof. Mohd. Hanif | Manisha Joshi "Green Banking: India’s Vision for Sustainable Finance in G20" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-7 | Issue-3 , June 2023, URL: https://www.ijtsrd.com.com/papers/ijtsrd57525.pdf Paper URL: https://www.ijtsrd.com.com/management/accounting-and-finance/57525/green-banking-india’s-vision-for-sustainable-finance-in-g20/prof-mohd-hanif
Promoting Responsible Business by BMOs - Issue II - FMCTheBambooLink
For the micro, small and medium enterprises (MSMEs), the backbone of both developing as well as developed nations, the challenge is how to promote these nearly 50 million MSMEs towards “Zero Defect Zero Effect” production. Interestingly, a significant proportion of these MSMEs are represented by their industry associations and Chambers of Commerce also called Business Membership Organizations (BMOs). BMOs being the most trusted ally of MSMEs, are best suited to promote the concept of “Responsible Business” in a balanced manner among millions of MSMEs in India.
Similar to Financing Sustainable Production among MSME Clusters - FMC (20)
Working Together Works – Cluster Case StudiesTheBambooLink
This book is a compilation of 19 case studies of cluster initiatives. It provides an insight into diverse cluster development approaches that can be undertaken with as much variety of objectives and outcomes. The idea is to capture the diversity of clusters, approaches,implementation agencies and objectives to help the reader draw one’s own lessons and conclusions. The case studies include a wide range of products among micro enterprises such as handlooms items, brass & bell metal, traditional footwear, crochet & lace work, coir products, hand tools etc.
State Cluster Development Policy Road MapTheBambooLink
To develop a roadmap to promote Cluster development initiatives in the state of Madhya Pradesh with a view to support and foster development of Micro, Small & Medium Enterprises (MSME) sector. There is a broad consensus that many countries in the world as well as many states in India have benefitted through cluster development approach. However, in case of Madhya Pradesh, success story of cluster initiatives is minimal. Atal Bihari Vajpayee Institute of Good Governance and Policy Analysis (AIGGPA) commissioned the study to examine the status of Cluster development initiatives in the state and to develop policy road map for cluster initiatives in association with Foundation of MSME Cluster (FMC), New Delhi.
Getting to Know Clusters: Frequently Asked QuestionsTheBambooLink
This document contains 69 simple questions in 18 short sections allowing the reader to sift through the type of questions of his/her interest as per the sections in the table of contents. The basic definition of cluster, its typology and spread has been captured. Issues of whether clusters should be newly created and aspects of how cluster policy is different from conventional enterprise development are also dealt with. Some of the terms like social capital, cluster mapping, cluster diagnosis, trust building, cluster action plan, networks and service providers which are commonly used in cluster development have been defined in the document.
Policy and Status Paper on Cluster Development in India.pdfTheBambooLink
This report takes stock of the developments that have taken place in the arena of cluster development and suggest inputs to a policy framework for promotion of cluster based MSME development in India. The document draws heavily from a wealth of secondary literature and benefited immensely from the documents shared by several practitioners as well as insights obtained from a number of unpublished sources. Report was funded by Swiss Agency for Development and Cooperation.
Pro Poor Cluster Development Methodology.pdfTheBambooLink
This document sponsored by EDII focuses on methodology of cluster development programme in poverty intensive clusters mostly consists of rural and urban informal clusters where primary stakeholders are mostly in poverty. How to identify the poor stakeholders, understand their problems, needs and prepare an appropriate action plan has been explained in the document along with the methodology of implementation of the programme to address poverty.
This report brings out demand side view points on how to create a suitable enterprise led approach for poverty alleviation and also suggest changes in the policy of schematic support. This report is based on a field study undertaken by FMC in 12 poverty intensive locations in India of which 6 have no micro enterprises clusters and another 6 micro enterprise based. This study was funded by UNDP.
Analysis of Factors for Employment in MSME Clusters - FMCTheBambooLink
This report is an outcome of a study commissioned by Institute of Applied Manpower Research (IAMR) of Planning Commission, Government of India to FMC. The report captured the phenomenon of “jobless growth” and draw policy suggestions, based on the field study of 46 MSME clusters in India. The study outlined major factors that have led to jobless growth and these factors were further analysed with respect to the sectors the clusters fell in.
Promoting Innovation in Clusters - Foundation for MSME Clusters (FMC).pdfTheBambooLink
This is a policy guidebook aspires to provide roadmap for cluster practitioners, development organizations, donor institutions and government agencies working towards promoting innovations in MSME clusters. It offers a practical approach and flexible framework for implementing an innovation promotion project in clusters, thus paving way for new frontiers of knowledge to develop innovative clusters.
Mapping Energy, Environment and Social Issues among MSME Clusters - FMCTheBambooLink
This report has indentified clusters from 11 sub-sectors in India which are economically significant, energy intensive and environment sensitive through a systematic methodology. A way forward has been suggested for tackling various energy, environment and social issues in the clusters. This study is funded by IICA.
Promoting Responsible Business by BMOs Issue III - FMCTheBambooLink
The existence of Indian MSMEs is deep rooted in clusters. It is estimated that 70 per cent of the manufacturing enterprises exist in clusters. Clusters of MSMEs are present all over the country. Evolution of these clusters has helped to reap the benefits of mutual co-existence. The member entities support each other in growing together and faster. However, the growth has not been as high as compared to their potential.
Fostering Business Responsibility in MSME Clusters Volume 3 TheBambooLink
Fostering Business Responsibility in MSME Clusters’ is in three volumes. Volume I is for Policy Makers, Volume II for Implementing Agencies (IAs) and Volume III for Cluster Development Agents (CDAs). These volumes are a guide to the varied roles and responsibilities all three stakeholders in encouraging Business Responsibility among Micro, Small and Medium Enterprises (MSMEs) through a cluster development approach have been explained in these volumes by using various case studies and illustrations. The document was made under the IICA-GIZ programme.
Fostering Business Responsibility in MSME Clusters Volume 2 - FMCTheBambooLink
Fostering Business Responsibility in MSME Clusters’ is in three volumes. Volume I is for Policy Makers, Volume II for Implementing Agencies (IAs) and Volume III for Cluster Development Agents (CDAs). These volumes are a guide to the varied roles and responsibilities all three stakeholders in encouraging Business Responsibility among Micro, Small and Medium Enterprises (MSMEs) through a cluster development approach have been explained in these volumes by using various case studies and illustrations. The document was made under the IICA-GIZ programme.
Cluster Twinning - Understanding the Dynamics and Methodological Issues - FMCTheBambooLink
The paper focused on “Cluster Twinning” was implemented that aimed at optimal process for the linking two clusters across different countries at different levels of development, i.e. a developed or mature and a developing or emerging cluster that were nevertheless producing similar products.
Study on Brand Building in Clusters to Improve Competitiveness of MSMEs - FMCTheBambooLink
The study has captured ten successful international examples of cluster based branding and the learning that has relevance for Indian clusters and could be extended to other developing countries as well. Branding potential has also been analyzed in eleven national clusters. Possible role of policy and clsuter stakeholders for cluster based brand promotion is suggested based on the leaning from the international cases. This book is an outcome of a study commissioned by SIDBI to FMC on cluster based branding.
Fostering Business Responsibility in MSME Clusters Volume 1 - FMCTheBambooLink
Fostering Business Responsibility in MSME Clusters’ is in three volumes. Volume I is for Policy Makers, Volume II for Implementing Agencies (IAs) and Volume III for Cluster Development Agents (CDAs). These volumes are a guide to the varied roles and responsibilities all three stakeholders in encouraging Business Responsibility among Micro, Small and Medium Enterprises (MSMEs) through a cluster development approach have been explained in these volumes by using various case studies and illustrations. The document was made under the IICA-GIZ programme.
Changing Paradigms of Cluster Development - FMC.pdfTheBambooLink
An overview of the practice of competitiveness through cluster development approach. We begin by looking at some of the roots of the practice and how it has evolved to become a significant force in the way many organizations and many countries now pursue economic development. We then provide an overview of the practice of competitiveness, looking specifically at how cluster-based initiatives have been developed in the context of multilateral and regional organizations.
Promoting Responsible Business by BMOs - FMCTheBambooLink
The Foundation for MSME Clusters being the premier organisation devoted to the cause of MSMEs and clusters, deemed it appropriate and timely to identify such BMOs that have made noteworthy contributions in the growth and development of MSMEs and therefore launched the “Awards for Responsible BMOs” programme and invited BMOs across the country to apply.
Training Manual 51 FAQs for easy access loans through schemes of Govt. of Ind...TheBambooLink
The booklet has been prepared as a part of the Project “Scaling up Sustainable Development of MSME Clusters in India”, being jointly implemented by Foundation for MSME Clusters (FMC), The Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ), Global Reporting Initiative (GRI), Indian Institute of Corporate Affairs (IICA), United Nations Industrial Development Organization (UNIDO) and Small Industries Development Bank of India (SIDBI) and partly funded by the EU Switch Asia Project.
Promoting Responsible Business by BMOs Issue IV - FMCTheBambooLink
Issues related to responsible growth have also emerged as an area of critical importance and has got national importance with the announcement of Zero Effect Zero Defect (ZED) growth path and equally impor- tantly with the resolve of the global community in the form of Sustainable Development Goals (SDGs) and in particular SDG 8 (promoting decent work) and SDG 12 (promoting responsible consumption and production).
Impact of Covid-19 on Borrower MSMEs -Issues and Pointers for Way Forward - FMCTheBambooLink
The advent of Covid-19 in 2020 had a cascading impact on the MSMEs of India, the banking system and the economy. Thanks largely to the quick liquidity infusion support to MSMEs through the banks, guaranteed by the Government of India and a few other measures to mitigate the impact of covid that helped provide a good degree of resilience to MSMEs without adversely affecting the sustenance of the banking system.
Premium MEAN Stack Development Solutions for Modern BusinessesSynapseIndia
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
Recruiting in the Digital Age: A Social Media MasterclassLuanWise
In this masterclass, presented at the Global HR Summit on 5th June 2024, Luan Wise explored the essential features of social media platforms that support talent acquisition, including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok.
Cracking the Workplace Discipline Code Main.pptxWorkforce Group
Cultivating and maintaining discipline within teams is a critical differentiator for successful organisations.
Forward-thinking leaders and business managers understand the impact that discipline has on organisational success. A disciplined workforce operates with clarity, focus, and a shared understanding of expectations, ultimately driving better results, optimising productivity, and facilitating seamless collaboration.
Although discipline is not a one-size-fits-all approach, it can help create a work environment that encourages personal growth and accountability rather than solely relying on punitive measures.
In this deck, you will learn the significance of workplace discipline for organisational success. You’ll also learn
• Four (4) workplace discipline methods you should consider
• The best and most practical approach to implementing workplace discipline.
• Three (3) key tips to maintain a disciplined workplace.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Improving profitability for small businessBen Wann
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
The key differences between the MDR and IVDR in the EUAllensmith572606
In the European Union (EU), two significant regulations have been introduced to enhance the safety and effectiveness of medical devices – the In Vitro Diagnostic Regulation (IVDR) and the Medical Device Regulation (MDR).
https://mavenprofserv.com/comparison-and-highlighting-of-the-key-differences-between-the-mdr-and-ivdr-in-the-eu/
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
What is the TDS Return Filing Due Date for FY 2024-25.pdfseoforlegalpillers
It is crucial for the taxpayers to understand about the TDS Return Filing Due Date, so that they can fulfill your TDS obligations efficiently. Taxpayers can avoid penalties by sticking to the deadlines and by accurate filing of TDS. Timely filing of TDS will make sure about the availability of tax credits. You can also seek the professional guidance of experts like Legal Pillers for timely filing of the TDS Return.
3. Page | 3
Disclaimer: This
This publication has been produced under the
Project “Scaling up Sustainable Development of
MSME Clusters in India” with the financial
assistance of the European Union. The Project is
implemented by the Foundation for MSME Clusters
(FMC) along with Global Reporting Initiative
(GRI), Deutsche Gesellschaft für Internationale
Zusammenarbeit (GIZ), Indian Institute for
Corporate Affairs (IICA), Small Industries
Development Bank of India (SIDBI) and the United
Nations Industrial Development Organization
(UNIDO). This publication is led by FMC & SIDBI.
The contents of this publication are the sole
responsibility of the authors and can in no way be
taken to reflect the views of the European Union or
any of the partners.
Any part of this report can be reproduced, used, or
transmitted, in any form or by any means with due
acknowledgement.
This paper is based on
the learning drawn from
Work Package-4 of the
project “Scaling Up
Sustainable Development
of MSME Clusters in
India” funded by the
European Union and the
SIDBI
Authors:
Ms. Sangeeta Agasty
Mr. Amit Tyagi
Ms. Ruchita Sanwal
Foundation for MSME
Clusters
Guidance and Inputs:
Mr. Ramesh Dharmaji,
CGM, SIDBI
Mr. Mukesh Gulati, ED,
FMC
Mr. Sanjay N. Gowan,
DGM, SIDBI
Mr. Karan Butalia, SVP
& Chief Business
Relations Officer
Axis Bank
April 2016
8. Page | 8
FOREWARD
The Micro, Small and Medium Enterprises (MSME) sector plays
worldwide an important and significant catalytic role for economic
development through enterprise creation and employment generation.
The MSME sector in India covers a wide spectrum of economic
activities. With more than 44.7 million enterprises, this sector generates
more than 100 million jobs, next only to agriculture sector. It also
contributes around 45 percent of total industrial manufacturing and 43
percent of India’s total exports. The sector manufactures over 6000
products, ranging from the traditional to hi-tech items, in addition to
providing a wide range of services. With the changing scenario, the
sector needs to constantly move up in the value chain as well as
strengthen its competitiveness in local as well as global markets.
Given the current scenario of energy constraints in India, sustainable development of the MSME sector
through appropriate policy initiatives aimed at promoting energy efficiency and reduction in greenhouse
gas emissions is an essential part of overall societal development. SIDBI, being the Principal Financial
Institution for the MSME sector, has been taking various initiatives for the holistic development of
industrial clusters. SIDBI has partnered with Foundation for MSME Clusters (FMC), Global Reporting
Initiative (GRI), GIZ and the Indian Institute of Corporate Affairs (IICA) to implement an ‘EU-Switch
Asia Programme’ (2012-16) for enabling adoption of sustainable environment and social business
practices across 5 MSME foundry clusters (Batala and Jalandhar in Punjab, Jaipur and Ajmer in
Rajasthan and Howrah in West Bengal). The project has targeted 1100 foundry enterprises. It had been
realised that availability finance was a major deterrent for enterprises from adopting energy efficient
technologies. Hence, one of the work packages of the project focused on enhancement of access of
credit to MSMEs through stronger linkages with banks and innovative financial products & delivery
mechanisms. SIDBI was the technical lead for this work package while the ground level delivery was
undertaken by FMC as per the guidance and backend support by SIDBI.
As a part of the project, SIDBI has taken the initiative to bring out this policy document, with the aim
to capture the financial and non-financial needs of this sector and to have a comprehensive
understanding of sustainable financing for the MSMEs.
I sincerely believe that this study will be useful for all the stakeholders like international development
agencies, Government Departments and commercial banks who are eager to encourage sustainability
financing for the promotion of sustainable consumption and production practices in the MSME sector.
(RAMESH DHARMAJI)
Chief General Manager, SIDBI
10. Page | 10
PREFACE
With the world awakening to the realities of climate change,
sustainability has already taken centre stage of development globally
and Govt. of India has made several commitments at national and
international platforms. The government has also taken several
initiatives in the period 2014-16 to have a renewed focus on solar
energy and reduce the burden on environment through initiatives such
as Zero Defect & Zero Effect. The National Clean Energy Fund has
been revised to ensure that the outreach and impact is strong by
undertaking several projects that help mitigate environmental
implications. The Jan Dhan Yojana, inception of Mudra bank, initiation
of Small Finance Banks and provision of social insurance to the un-
insured will have a further positive impact at the national level.
The small enterprises that have together almost half of the manufacturing share but significantly higher
employment contribution requires a strong policy thrust that must be multipronged and coordinated by
a variety of stakeholders. One of the key missing factors has been the financing of small enterprises in
general and financing for sustainability in particular. A few national and international banks have taken
lead to highlight and support initiatives in this area and notable among them are IFC, SIDBI, KfW (a
German Development Bank), State Bank of India and Yes Bank to name a few.
Under an ongoing project, Scaling up sustainable MSME clusters in India, funded largely by the
European Union (EU) followed by the Yes Bank and SIDBI, the project during the period 2012-16
reached out to 1100 foundry enterprises across three states of Punjab, Rajasthan and West Bengal. Out
of these, almost 500 of them were targeted for direct technical support to help them improve energy
efficiency and consequentially save about 25000 MTs of carbon every year. While many of them
undertook process oriented changes, 120 of them required to undertake capital equipment upgradation
and thus needed institutional credit.
Many of the international donor institutions including European Union, United Nations Industrial
Development Organisation, KfW, JICA, World Bank through GEF facility and several others have been
alive to integrating technical support with credit financing. The above mentioned project assisted 92
enterprises to seek sustainability linked financing from several banks in India and this policy document
probably for the first time tries to capture the experiential learnings and provide policy
recommendations. We believe that the document will be of use not only for the international
development agencies but also Reserve Bank of India, Indian Bankers Association, Department of
Financial Services, Ministry of MSME and several scheduled banks that are keen to promote
sustainability financing.
The key to effective implementation of such targeted interventions lies in our ability to design
interventions with convergence. Second, the implementation will not be meaningful without
coordination among regulatory & development policy makers, enterprises & their representative bodies,
service providers and banks. We hope that some of the learnings and recommendations will find their
way among the well-meaning development practitioners, regulators and development policy makers in
their ongoing and future endeavours.
(MUKESH GULATI)
Executive Director, Foundation for MSME Clusters
11. Page | 11
List of Acronyms
BDSP: Business Development Service Provider
BMO: Business Membership Organizations
CA: Chartered Accountant
CFKDBL: Cluster Focused Knowledge Driven Banking
CGTMSE: Credit Guarantee Trust for Micro & Small Enterprises
CII: Confederation of Indian Industries
CLCSS: Credit Linked Capital Subsidy Scheme
CO2
: Carbon dioxide
DBC: Divided Blast Cupola
DIC: District Industries Centre
ESCOs: Energy Service Companies
EU: European Union
FAQ: Frequently Asked Questions
FI: Financial Institution
FMC: Foundation for MSME Clusters
GDP: Gross Domestic Product
GIZ: Deutsche Gesellschaft für Internationale Zusammenarbeit
GRI: Global Reporting Initiative
IFC: International Finance Corporation
IICA: Indian Institute of Corporate Affairs
ISTSL: India SME Technology Services Ltd.
ME: Micro Enterprise
MSME: Micro Small and Medium Enterprise
NBFC: Non Banking Financial Companies
NCEUS: National Commission for Enterprises in the Unorganized Sector
NOC: No Objection Certificate
NPA: Non-Performing Asset
PNB: Punjab National Bank
RBI: Reserve Bank of India
12. Page | 12
SBC: Single Blast Cupola
SCP: Sustainable Consumption and Production
SIDBI: Small Industries Development Bank of India
TEQUP: Technology Upgradation Scheme
UNIDO: United Nations Industrial Development Organisation
WP: Work Package
13. Page | 13
Table of Contents
CHAPTER I..........................................................................................................................................15
INTRODUCTION ................................................................................................................................15
CHAPTER II.........................................................................................................................................18
Status of Existing Institutional Finance among MSMEs ......................................................................18
CHAPTER III .......................................................................................................................................19
Project Objectives and Interventions Designed ....................................................................................19
CHAPTER IV.......................................................................................................................................21
Experiences from the Project and Learnings therefrom........................................................................21
CHAPTER V ........................................................................................................................................33
Way Forward ........................................................................................................................................33
Table of Figures
Figure 1: The Project Output Flowchart..................................................................................22
Figure 2: Area wise distribution of linkages............................................................................24
Figure 3: Total number of enterprises that availed loans.........................................................25
Figure 4: Number of enterprises availing loans.......................................................................26
Figure 5: Sequential services provided to the enterprises........................................................27
Figure 6: Nature and degree of support ...................................................................................27
Figure 7: Relation between First-time loanees and degree of support.....................................28
Figure 8: Loan Processing Time in months.............................................................................28
Figure 9: Training Manual.......................................................................................................29
Figure 10: Schemes Availed....................................................................................................31
Figure 11: Linkages with banks as per size of enterprises.......................................................32
15. Page | 15
CHAPTER I
INTRODUCTION
Manufacturing in the Micro, Small and Medium Enterprise (MSME) sector plays a major role
in the Indian economy contributing to 8 percent of the country’s GDP, 45 percent to
manufacturing sector output and 40 percent to India’s total manufactured exports. According
to the annual report (2012-13) of Ministry of MSME, there are about 44 million MSMEs in
India employing over 100 million people and is the second largest employer in India after
agriculture. There are over 7,000 products, ranging from traditional to high-tech, that are
manufactured by Indian MSMEs today.
Despite its significant contribution to the economy, MSMEs often find it hard to comply with
environmental legislations due to various technical and non-technical limitations leading to
poor levels of sustainability. The pollution per unit of production is generally higher in select
sectors of MSMEs than that of the corresponding large enterprises partly due to use of obsolete
technologies and poor management practices, and partly because many of the enterprises do
not come under regulatory ambit (FMC, The Businss in Business Responsibility, 2009).
It has been mentioned in Planning Commission’s Working Group paper that around 70 per
cent of the total industrial pollution is contributed by MSMEs in India.(Planning
Commission, 2014) Although the basis of estimate is not mentioned but the figure is indicative
that the volume of pollution is significantly high. The pollution per unit of production is
generally higher in select sub-sectors of MSMEs than that of the corresponding large
enterprises partly due to the use of obsolete technologies and poor management practices.
(“Mapping Energy, Environment and Social Issues among MSME Clusters in India”, 2009).
Several MSMEs either find it difficult to comply with the environmental regulations resulting
in loss of competitiveness or unable to do so due to lack of access to appropriate & affordable
green technologies, lack of adequate finances, non-availability of technical guidance from
experts, difficulty in procuring alternate land for re-location and so on. On the other hand,
regulatory authorities also face difficulties in ordering the closure of polluting and non-
complying MSMEs since such action would lead to loss of production, unemployment and
social unrest.
In India, according to a study done by Foundation for MSME Clusters (FMC), 11 sub-sectors
have been identified which are economically significant, energy intensive and environment
sensitive clusters. (“Mapping Energy, Environment and Social Issues among MSME Clusters
in India”, 2009) Hence, the need for Sustainable Consumption and Production is critical in
these sectors. Out of these sectors, foundries occupy the most significant position and have
been listed in the “Red Category” industries1
because of certain pollution-generating operations
such as sand preparation, emissions from cupola furnaces, production of waste used and sand,
1
The CPCB has classified 64 types of polluting industries/ industrial activities as “Red Category” industries on the basis of high emissions/
discharge of significant pollutants or generating hazardous wastes. Industries where the degree of pollution is less, are termed as “Orange”
category industries and small-scale and cottage/village industries are categorized as “Green” category industries.
16. Page | 16
slag and sludge. In Small foundry industry, coal is used for metal melting in Cupola furnaces.
The energy costs contribute about 25 - 30% of the manufacturing cost in Indian foundry. (BEE,
2011)
Excluding a few large and medium foundries, which are modern and competitive, most small
and micro foundries in India—constituting 96.6% of the total number of foundries—suffer
from technological obsolescence, production inefficiencies and weak finances. They
manufacture predominantly low-value, low-quality products for a saturated market. Foundries
supply castings to almost all engineering industries; for example, the infrastructure industry,
the government’s thrust area, requires ingots and billets.
India ranks third in the world as the producer of castings after China and the US, the domestic
industry is unable to meet the increasing demand from the user industries for high-quality and
high-value foundry products. Major energy sources being used in foundry sector are electricity
and fuels such as Coal, Furnace Oil, and Diesel. This depends on application of technology,
process requirement, availability, and economic and safety point of view. The two forms of
energy being used in foundry sector in typical foundry enterprises are electrical energy and
thermal energy. Electrical energy is being used in melting of iron in induction furnaces;
operation of electrical utilities and thermal energy is being used in cupola furnaces operation.
(BEE, 2011)
Cleaner production, green technology, energy efficient technologies and resource efficient
technology are synonymously used as sustainable production2
and is emerging as an
important medium to attain sustainable development3
of MSMEs. It enables increased
efficient use of resources and reduced negative impact on environment and thus, leading to
greater sustainability. One of the key factors adversely affecting the adoption of sustainable
practices among MSMEs is considered to be the non-availability of institutional finance
and this paper deals with this issue in further detail, building on the experiences of a
development project implemented in the foundry sub-sector among 500 MSMEs across 3 states
of India during the period 2012-16.
Since, the foundries in India are significantly polluting but have a great scope for energy
savings, FMC streamlined foundries from other sectors and have launched their project to
intervene and introduce energy efficiency practices. During the duration of Project on energy
saving by FMC, there has been an estimated savings of 30,000 tonnes of CO2 emission on an
annual basis against a total opportunity of 150,000 metric tonnes at the national level. The
figure of opportunity in financing may work out to be Rs. 300 crores if only 1000 enterprises
2
The Lowell Center for Sustainable Production, 1998 defined Sustainable Production as creation of goods and services using processes and
systems that are: non-polluting, conserving of energy and natural resources, economically viable, and safe and healthful for workers,
communities, and consumers.
3
According to the Brundtland Commission of the United Nations (1987), “sustainable development is development that meets the needs of the
present without compromising the ability of future generations to meet their own needs”. This involves the three pillars of environmental,
economic, and social sustainability. Sustainable production attempts to establish a solid foundation for all three pillars to achieve a
sustainable business practice.
17. Page | 17
out of 5000, which are the middle and lower enterprises and excludes the 500 enterprises which
fall in the higher category, are to be targeted requiring Rs. 30 lacs each on an average.
The project is based on a fundamental assumption that lack of information about availability
of clean technologies/ energy efficient methods and their consequential business case
associated is the primary reason for MSMEs lagging behind in up gradation and modernization
of their facilities. Thus, with technology upgradation through machinery and equipment
change, which is capital intensive, it would arise the need of finance in these enterprises.
Through this4-year-long project titled “Scaling Up Sustainable Development of MSME
Clusters in India”(2012-16) substantially funded by the European Union (EU) under SWITCH
Asia component, it contributes towards enhancing the competitiveness of less sustainable
MSME clusters, while reducing their environmental and social impacts. In order to achieve the
objective, the Project has been designed along five main activities (Work Packages)
Work Package 1: Foster sustainable production through technical and non-technical
measures
Work Package 2: Build capacities of Business Membership Organizations (BMOs) for
Sustainable Consumption and Production
Work Package 3: Introduce and facilitate Aggregate Sustainability Reporting among Cluster
MSMEs
Work Package 4: Enhance access of MSMEs to credit through stronger linkages with
Financial Institutions (FIs) and innovative financial products and delivery mechanisms
Work Package 5: Undertake policy advocacy and dissemination
The MSMEs in the foundry sector were provided with missing technical support services in
terms of knowledge and handholding to help 500 foundry enterprises adopt and adapt
sustainable production practices in 4 clusters across 7 locations in Punjab, Rajasthan and West
Bengal. To facilitate adoption of such sustainable practices, the project also provided
special emphasis on credit facilitation with institutional finance. There has been a constant
issue of non-availability of institutional finance, thus WP4 aims that by involving banks as
business partners, it can address one of the key problems faced by MSMEs in adopting
sustainable practices – namely the limited availability and access to credit for sustainable
production and this paper mainly deals with this issue in further detail.
The project was implemented by a consortium of national and international partners viz.
Foundation for MSME Clusters (FMC), GIZ (a German bilateral technical development
agency), Global Reporting Initiative (GRI), United Nations Industrial Development
Organisation (UNIDO), Indian Institute of Corporate Affairs (IICA) and Small Industries
Development Bank of India (SIDBI). As a pioneer development financial Institution engaged
in promoting sustainable development of MSMEs in the country, SIDBI has helped design
and guide the process of execution of institutional credit financing. The project had at the
design stage targeted institutional credit provision with 100 MSMEs in foundry sector and
strengthen credit delivery system for the MSME sub sector in the country. Specific objectives
of this work package are given in section III on Project Objectives & Intervention of this paper.
18. Page | 18
This learning paper captures the experiences of the project and suggests policy measures
to the banks & relevant policy stakeholders to promote sustainable production among
less sustainable MSMEs through appropriate financial mechanisms.
CHAPTER II
Status of Existing Institutional Finance among MSMEs
As reported by the Reserve Bank of India (RBI), 8% of all MSMEs across different sectors in
the country have access to banks and financial institutions, while the rest 92% remain excluded
and are compelled to raise money through informal channels. (RBI, 2015) Poor households
increasingly have access to small loans, usually in the range of Rs. 50,000 and less from
microfinance institutions, and medium & large enterprises can get credit through commercial
banks and open debt markets. But many micro and small entrepreneurs remain under-served,
particularly in the range of Rs. 50,000 to Rs. 10 lacs. Their financial needs are generally too
large for microfinance, but too small for commercial banks & open debt markets. This gap
inhibits growth and limits the development of micro and small enterprises. It is also a loss to
the financial sector, which ignores millions of potential MSME borrower clients.
The government has been trying to push the banks to lend to the MSMEs for several decades.
Banks are pushed to lend to MSMEs as per the Priority Sector Lending requirements instituted
by Reserve bank of India (RBI) since 1972.In terms of the recommendations of the Prime
Minister’s Task Force on MSMEs in the year 2010, banks were advised to achieve a 20 per
cent year-on-year growth in credit to micro and small enterprises and a 10% annual growth in
the number of micro enterprise accounts. As per the more recent RBI circular (2014-15), in
order to ensure that sufficient credit is available to micro enterprises within the MSE sector,
banks should ensure that: (a) 40 per cent of the total advances to MSE sector should go to micro
(manufacturing) enterprises having investment in plant and machinery up to Rs. 10 lakh and
micro (service) enterprises having investment in equipment up to Rs. 4 lakh; (b) 20 per cent of
the total advances to MSE sector should go to micro (manufacturing) enterprises with
investment in plant and machinery above Rs. 10 lakh and up to Rs. 25 lakh, and micro (service)
enterprises with investment in equipment above Rs. 4 lakh and up to Rs. 10 lakh. Thus, 60 per
cent of MSE advances should go to the micro enterprises. (RBI Circular: RBI/2014-15/93
RPCD.MSME &NFS.BC.No. 3/06.02.31/2014-15).
In contrast, evidence from National Commission for Enterprises in the Unorganized Sector
(NCEUS) 2009 shows that in August 2007 and 2008, credit for credit cards increased by 86.3
per cent, all services sector by 35.3 per cent, construction by 48.3 per cent, real estate by 46.3
per cent whereas increase of credit for MSMEs by just 9.7 per cent. Overall availability of
credit to MSMEs as percentage of net bank credit of the scheduled commercial banks has
declined from 15.5 per cent in 1996-97 to 6.6 per cent in 2007-08. A study undertaken by
Intellecap and supported by International Finance Corporation (IFC) in the year 2012 reflected
a huge demand supply gap of Rs 20.9 Trillion.
19. Page | 19
Based on global experiences and various studies done by GIZ, UNIDO, FMC, SIDBI and other
organisations, it has been seen that the problems faced by the MSMEs can be analysed
primarily from a three-fold perspective: demand-side, supply-side and intermediary channels.
On the demand side, most of the MSMEs have very low awareness of relevant financial
products and public support schemes and ability of accounting, drawing business plans.
Whereas, on the supply side the main bottlenecks include lack of innovative financial products
and public schemes that enable cluster enterprises to switch to green technology and adopt
broader sustainability issues that help MSMEs bring down their operating costs. Besides, local
bankers, credit officers and other actors in the credit delivery channels are often not trained to
be sensitive towards the needs of MSMEs for wider sustainability issues. Such differential
factors in the demand and supply of credit financing have limited the MSME owners’ ability
to address sustainable production.
CHAPTER III
Project Objectives and Interventions Designed
The objective of this one out of the five work packages of the project was to enhance access of
credit to MSMEs through stronger linkages with Financial Institutions (FIs) and innovative
financial products & delivery mechanisms.
The specific sub objectives were as follows.
Strengthen existing financial products and credit delivery channels
Develop new financial products and credit delivery channels
Link 100 MSMEs to FIs and other public funding options for sustainable production
SIDBI was at the technical lead for this work package while the ground level delivery was
undertaken by FMC as per the guidance and backend support by SIDBI. It was expected that
credit will essentially be required for those enterprises among the targeted 500 enterprises that
would purchase capital equipment needed for adoption of sustainable practices i.e. around 250
enterprises. The enterprises that do not go for capital equipment purchase may only adopt better
practices i.e. the remaining 250 enterprises. It was expected at the project design stage that
credit provision of INR 15 crore will be undertaken to reach 100 enterprises even though
demand may exist among larger numbers. Financial linkages were aimed to be provided by any
financial institution that was willing to fund the targeted MSMEs.
Besides the credit provision, the project also targeted to tie up loans with available
government’s public schemes of assistance available and in particular 2 such credit linked grant
based schemes that could be availed of by the enterprises. These 2 schemes in vogue were
administered by Ministry of MSME, Govt. of India and are called Credit linked Capital Subsidy
Schemes (CLCSS) (15% subsidy) and Technology Upgradation Scheme (TEQUP) (25%
subsidy). In order to encourage banks to provide collateral free loans, another instrument was
intended to be linked with Credit Guarantee Trust for Micro & Small Enterprises (CGTMSE)
20. Page | 20
where 75% of the credit provided by the banks would be guaranteed by the Trust if the
enterprises pay the requisite fee for the same.
While the above measures were intended to be undertaken using available financial products,
government schemes for grant based assistance and credit guarantee; it was felt that the project
must also support creation and implementation of at least one financial product that supports
sustainable production uptake. It was felt that the creation of innovative financial product will
be undertaken sometime in the middle of the project i.e. 2 years from the project start date and
it would build on the experiences till then.
The project aimed to capacitate the Business intermediaries, especially Business Membership
Organisations (BMO), Business Development Service Providers (BDSPs) and Chartered
Accountants (CAs) for bringing synergy between sustainable business and finance for MSME
sector by informing MSMEs about innovative Sustainable Consumption and Production (SCP)
based financial products and public schemes, and supporting them with application
process/procedures as well as linking them to banks and public funding agencies. At the same
time, BMOs and BDSPs would be the point of information for FIs about MSMEs’ needs and
performance with regard to SCP (e.g. communicating relevant data on MSME performance
from individual and aggregate MSME reports), and a bridge between MSMEs and FIs.
Hence, activities that have been designed as part of project objective comprise the following:
Undertake assessment of the financial and non-financial requirements of MSME clusters
It was envisaged that the project team would gather information to map the clusters’ key
economic data, mapping of foundry enterprises by name & location and their volume of
production to assess their financial/non-financial needs. This would help to better
understand the role of credit financing in achieving the project’s bigger role to help MSMEs
adopt sustainable production practices. It would also enable the project team in providing
gross level information to the banks to help them assess the potential aggregated demand
for credit offtake at cluster and state level and also to assess the viability to develop and
design commercially viable new financial products.
Identify, modify and develop innovative financial products and tools
Based on the study undertaken, it was aimed to amend select existing financial products and
design and develop new financial products.
Strengthen and create credit delivery channels
Local banks, including the branches of SIDBI, would be sensitized on the non-financial
and financial constraints faced by MSMEs and trained on amended and new financial
products.
BMOs would be capacitated to support the credit delivery channels. BDSPs and service
providers would be linked to MSME through BMOs
21. Page | 21
Financial BDSPs (i.e. chartered accountants) would be educated about and capacitated to
provide support on the innovative financial products, and requirement of the banks for
internal documentation/reporting to ensure demand driven services to MSMEs.
Organise Cluster level sensitization and awareness workshops and training programs
It was aimed that FMC and SIDBI together would conduct several awareness generation
workshops for MSMEs to inform them about the available financial products and delivery
channels.
Facilitate and strengthen linkages between MSMEs and banks and public schemes
Local banks would be engaged with BMOs and/or other intermediaries in every cluster to
create financial linkages and scale up credit delivery system in the cluster
Eligible and willing MSMEs will be identified and linked to financial service
Trained BMOs and BDSPs would start providing financial and non-financial or technical
assistance to MSMEs e.g. prepare financial applications along with the detailed project
reports
CHAPTER IV
Experiences from the Project and Learnings therefrom
The project had a scope of reaching out to 1100 foundry enterprises spread across four cluster
regions. The project provided direct support (Direct involvement) to 422 enterprises and
indirect support (reach out of interventions to neighbouring enterprises without direct
involvement of FMC) to 678 enterprises. Out of 422 enterprises, 22 units availed institutional
finance for technological upgradation. 70 units who were provided indirect support also availed
institutional finance. Thus, out of these units, maximum enterprises i.e. 83 enterprises availed
CLCSS followed by TEQUP and CGTMSE. CLCSS had maximum number of takers in spite
of a lower subsidy as compared to TEQUP because of absence of procedural hassles. Out of
the 711 enterprises, 28 are such that could not avail institutional finance. This intervention
process has been depicted in the following figure.
23. Page | 23
A widespread notion in the policy segment exists that only substantive higher technology
equipment changes can lead to energy savings. However it has been realized that there can be
substantial savings in energy efficiency by everyday practice which can only be improved
through skilling. Generally, the energy savings by habitual practices are ignored and more
focus is laid on savings by adoption of new technologies. This is also since most of the
government policies and schemes have their primary focus on tangible schemes which can lead
to capital infusion by linking up with formal financial institutions. Hence, not much attention
is given to the importance of financing for skill training.
For a micro enterprise, changing its existing “inefficient/inappropriate” technology is much
more than just a financial decision, since it is not just about installation of the machine alone,
but also includes its operational procedures, maintenance and above all its acceptance by
labourers since micro enterprises (ME) are relatively labour intensive. Interestingly MEs
largely works with highly mobile contractual labourers. Keeping foundries as the sample, 70-
80% of the workers are migratory and contractual labourers. The enterprise owners are less
willing to invest in training and simultaneously contractual labourers who see a short run
engagement with an ME are naturally not willing to trade lower productivity for new
technology, unless adequately compensated for the same. Also of importance are the buyers’
expectations on quality, which if met through an existing technology, will give veto against
any “efficient/appropriate” technology change. Hence, on the basis of this experience, learning
could be gauged out which is highlighted below.
Learning No. 1: Financial need assessment for sustainable production requires a
comprehensive understanding and factoring of the techno-commercial aspects of the
targeted businesses. (Supply side issue)
24. Page | 24
The Project was carried out in 7 locations across 4 clusters which are tabulated in the diagram
below. The total number of linkages developed is 92enterprises which comprises of 50 micro
enterprises and 42 small enterprises with 0 enterprises from the medium type. This document
uses the definition laid down by MSMED Act 2006 for classification of enterprises into micro,
small and medium enterprises.
Figure 2: Area wise distribution of linkages
Area wise distribution of linkages
Clusters Ludhiana/
Jalandhar
Batala/
Amritsar
Jaipur/
Ajmer
Howrah
Total outreach
(Direct +Indirect)
450 250 200 200
Direct enterprises 278 61 34 38
Enterprises which
required financial
assistance
83 2 7 0
As observed, the highest number of linkages was established in Ludhiana/ Jalandhar clusters.
This is due to the fact that the region has the presence of highest number of foundries, in
comparison to other clusters. Also, the Ludhiana intervention team were involved in multi-
faceted operations and due to the team’s large size, their degree of involvement was much
higher than the rest of the clusters. Howrah had no linkages established as one of the major
reasons was that, the foundries were not able to expand owing to the state’s regulations against
expansion and modernisation of foundry enterprises in Howrah.
Learning no. 2: Selection of clusters most conducive for sustainability financing
requires judicious selection system (Supply side issue)
46
0
4
0
37
2 3
0
0
5
10
15
20
25
30
35
40
45
50
Ludhiana/
Jalandhar
Batala / Amritsar Jaipur / Ajmer Howrah
25. Page | 25
Thus, it is very important for bankers to intervene in clusters which have a huge mass of similar
enterprises and the interventions have been intensive.
An investment return ratio of the technological improvements (based on a standard production
condition) reflected that not only going for better practices (costing only expert fees) and partial
technology corrections (costing expert fees and retrofitting) were highly remunerative i.e.
investment of Rs 0.5- 0.7 lakhs, the returns to investment period has been 1 to 100 days with a
minor coke saving of 5-8 % in the enterprises. Whereas, a complete technology overhaul from
Single Blast Cupola (SBC) to Divided Blast Cupola (DBC) demands much higher investment
at say, Rs 7 lakhs with a payback period of around 500 days but saving 10-25%of the coke due
to higher operating efficiency. As a result, the 92 foundries where the project has worked so
far, 90 per cent cases represent technological changes in the form of better practices and
retrofitting like fine-tuning and installation of measuring equipment and only 10 per cent
represent technology upgradation, i.e. from SBC to DBC against our assumption of 50% at
design stage.
Table: Investment-return of technology changes in foundries
Type of technology
change
Investment Coke saving
(In %)
Payback Period
(In days)
SBC to DBC Upto Rs. 7 Lakhs 10-25 500
Retrofitting Rs. 0.5-0.7 lakhs 5-8 1-100
The total volume of loans sanctioned
under term loans are Rs. 2,894.1 lacs and
Rs. 1257 lacs for working capital loan. It
was observed that many of them already
had access to working capital loan but
needed credit for capital expenditure.
The enterprises which have upgraded
their enterprises from SBC to DBC have
taken an average loan of 58.32 lakhs and
the enterprises that have carried out
retrofitting have taken an average loan of
33.94 lakhs from the bank. It has been
seen that 52 enterprises out of 92 have
taken loans from banks for the first time.
The table listed below gives a brief description of the number of enterprises availing loans.
Units that availed loans:
92
Units that availed
Working Capital
Loans and term loans
both: 30
Figure 3: Total number of enterprises that availed loans
26. Page | 26
Figure 4: Number of enterprises availing loans
Degree and Nature of support
Based on FMC’s experiences, majority of the micro enterprise owners do cash transactions as
a result of which their records don’t reflect the true financial viability of the enterprise. Thus,
the banks are unable to lend to these enterprises.
To address the above mentioned problems, FMC tried to comprehend the problems faced by
the MSME enterprises and provided a two-pronged solution approach- working on both the
demand side and solution side. For the demand side, two kinds of interventions were laid down.
Firstly, conduct awareness generation meetings for the enterprises providing them hand-
holding support, thus building up their capacities. Through 7 cluster level workshops and 4
BMO trainings on new and modified financial products, 200 enterprise owners were sensitized.
Secondly, the enterprises were provided with 6 chartered accountants in total (3 in Punjab, 2 in
Ajmer and 1 in Howrah), who would facilitate their financial linkage with the banks. The
chartered accountant would be responsible for identifying the potential cases, helping the
enterprises in arranging their documents, filling up the forms and following up with the banks.
Four sets of sequential services were developed and provided which entails the services
provided to the enterprises, which are awareness development, assistance of the consultants
through identification of cases, documentation procedure and follow up with banks.
0 10 20 30 40
1-10
10-25
25-50
50-100
> 100
19
34
25
11
3
Number of
units availing
loans
Loan
size
in
Rs.
Lacs
27. Page | 27
Figure 5: Sequential services provided to the enterprises
For any kind of financial linkage development especially in the MSME sector, it is very
important to build the MSME’s capacity in terms of documentation and awareness creation,
help them in developing credit discipline (maintaining records like cash flow, balance sheet,
repay loans in time). Credit worthiness assessment and requisite due-diligence can be
conducted by the financing institution in partnership with the respective buyer. Appointment
of specific intermediaries (post training) to provide handholding support during the entire
production cycle ensures the enterprise’s self-sufficiency.
The demand of the enterprises towards these services has been represented in the column chart
given below to get a picture of the nature and degree of support for the enterprises for various
stages. Here stage connotes the type of service as mentioned in the above figure.
Figure 6: Nature and degree of support
On the demand side, it has been seen that 38 enterprises out of 92, required total hand-holding
across all the 4 stages. Out of these 38 enterprises, 27 were the first time-loanees which have
been depicted in the chart below.
Awareness
Generation
Identification of
potential loanees
Documentation
procedure
Follow-up with
banks
38
16 17
21
0
5
10
15
20
25
30
35
40
4 stages Any 3 stages Any 2 stages Any 1 stage
No. of
units
28. Page | 28
Figure 7: Relation between First-time loanees and degree of support
Learning 3: First time loanees require more intensive support across different stages of
progress (Demand side issue)
Figure 8: Loan Processing Time in months
Learning no. 4: There is apparently not much difference between first timers and non-
first timers because of the processing system. (Supply side issue)
It has been seen that the loan processing time remains the same for first time loanees and non
first-timers. This is because the difference lies in the pre-application stage which is before the
loan processing begins. The first time loanees take greater amount of time in fulfilling the
documentation requirements of the banks as compared to the non-first timers, who are aware
27
6
8
13
0
5
10
15
20
25
30
4 stages Any 3 stages Any 2 stages 1 stage
First Time loanees
26
18
9
1 0
25
10
2
0 1
0
5
10
15
20
25
30
0-3 3-6 6-12 12-18 18-24
First Timers
Non-first Timers
Months
29. Page | 29
of bank’s requirements. Once the document requirements are fulfilled, it takes the same amount
of time for first timers and non- first timers to get their loans processed.
Since, a large number of enterprises were provided total hand-holding support, it enabled the
enterprises to get their loan processed in less than 6 months due to guidance from chartered
accountants and their cases being followed up with banks by the chartered accountant. The CA
has enabled credit discipline among the enterprises by helping the enterprises to maintain their
vital records and balance sheet, minimizing the delay in repayment of the loans, etc. This
emphasizes the need for a sequential package of services over a period of several months, which
would help the entrepreneurs to walk through the entire process, thus enabling more people to
take loans.
For the purpose of facilitation, 2 banks and 7 bankers and
credit officers have been sensitized towards the needs and
constraints of MSMEs in foundry sector. Bilateral meetings
have been conducted with banks like Punjab National Bank
(PNB) and State Bank of India (SBI). Thirdly, delivery
channels have been strengthened and developed and
facilitators who can help bringing bankers and MSMEs
together by way of aggregating the similar MSMEs credit
requirements and by adapting selection criteria and loan
size to MSMEs needs have been strengthened. More focus
has been laid down on schemes and not on loan
disbursement. Also 900 copies of 51 FAQ booklets have
been distributed which were prepared to firstly, make
MSMEs better prepared to become loan-fit and secondly,
to make MSMEs aware about various financing schemes of
the banks and govt. of India, and in particular detail the two most popular financing schemes-
CLCSS and CGTMSE.
The enterprises in the MSME Clusters need to get prepared to face the standard questions by
banking fraternity. Thus the FAQ Booklet enabled the MSMEs to get well-versed with the
procedural requirements for loan applications, etc. It included broader issues like what are the
schemes, eligibility criteria, what are the basic norms, etc. Industry need to be prepared to keep
documents ready in advance, else there is loss of crucial time. The three primary documents to
be kept ready in advance should be industrial land NOC, DIC registration and balance sheet.
Learning no. 5: Awareness creation, financial literacy, sectoral inputs and handholding
support can facilitate provision of credit from banks for the first time loanees (Facilitation
issue)
Launch of new financial product by SIDBI: 4E Financing scheme has been launched in the
clusters to promote end-to-end energy efficiency investments in the clusters. 4E was launched
at the fag end of the project. This scheme is supposed to help MSMEs to adopt energy
Figure 9: Training Manual
30. Page | 30
efficiency measures and provide assistance for the implementation of energy efficiency
methods to ensure that the MSMEs have access to all the required services of reputed and
experienced technical consultants at reasonable costs. The intervention will also look that the
services are being delivered with quality and in a timely manner. It has come up with various
energy efficiency measures for the betterment of the MSMEs through the steps like executing
detailed energy audit and giving suggestions for suitable energy savings measures; providing
support for implementation of suggested energy savings measures; and carrying out
measurement and verification audit for quantifying the actual energy savings. India SME
Technology Services Ltd. (ISTSL), an associate firm of SIDBI has spearheaded the 4E
intervention. It also seeks empanelment of consultants or Energy Service Companies (ESCOs
or the promotion and implementation of energy efficiency measures in the MSME enterprises
along with channel partners like Confederation of Indian Industries (CII), FMC, etc.
Learning 6: Modification was not required in the existing financial products. However,
there was a felt need for an integrated support mechanism that combined financial
instrument with technical assistance. (Supply side)
Thus, FMC has created linkages by working on both the demand side and the supply side. By
linking MSMEs to banks through BMOs, the Project has made an effort to deal with the
negative environmental impact clusters have by revamping the lending practices of banks by
using a more MSME friendly TBL approach that focuses on sustainable practices. The Project
together with SIDBI has capacitated BMOs and other intermediaries to aid MSMEs in
prevailing over their key challenges with respect to access to credit.
Schemes Availed
It had been assumed that since credit is a derived demand, technological upgradation in the
enterprises would increase the credit offtake, and hence more enterprises would be linked with
grant based public schemes of assistance. Considering the augmented demand for better
technology in the enterprises, the enterprise owners have started availing government schemes
for the technological upgradation. Out of 233 public schemes of assistance provided by
different ministries and credit guarantee scheme by CGTMSE trust, 43 schemes are credit
linked. Out of the 43 schemes, the 3 schemes i.e. CLCSS, TEQUP and CGTMSE were relevant
to our project as they were the most suitable for technological upgradation in this sector. The
schemes availed across the enterprises have been represented in the column figure below. Out
of 64 enterprises, a significant number of enterprises have availed the Credit Linked Capital
Subsidy Scheme (CLCSS) while the other schemes like TEQUP and CGTMSE denote a
uniformly low rate.
31. Page | 31
Figure 10: Schemes Availed
Out of 92 enterprises, 83 enterprises availed for CLCSS, 2 enterprises availed CGTMSE, and
7 enterprises availed TEQUP. The significant difference in the numbers marks an evident
preference for CLCSS among enterprises. Although, CLCSS offers a capital subsidy of 15%
against TEQUP which offers a higher capital subsidy of 25%, but 90.2% of enterprises have
preferred CLCSS since its procedure is hassle-free and does not have to involve auditors, unlike
TEQUP. Also, the off-take of schemes by the enterprises has increased due to the awareness
generation programme conducted by FMC. According to FMC’s learnings based on
experience, it has been seen that the bankers shy away from lending under CGTMSE scheme
as the bankers opine that once the enterprise owners (typically micro) get credit under the
CGTMSE, there is a tendency among these enterprises to not repay their loan resulting in a
NPA for the banks.
Learning no: 7: Transaction cost of availing a grant based scheme is a very strong
determining factor for its offtake. Nevertheless offtake of public schemes of assistance
can be increased when integrated with a scaled up technical assistance programme.
(Supply side issue)
Linkages with Banks
The graph below represents the banks accessed by the micro and small enterprises. The micro
enterprises have shown higher preference towards SIDBI.
83
7
2
0
10
20
30
40
50
60
70
80
90
CLCSS TEQUP CGTMSE
No. of enterprises
32. Page | 32
Out of 50 micro enterprises, 11 enterprises accessed SIDBI (22%), 10 enterprises accessed
Punjab National Bank (20%) and 8 enterprises accessed Canara Bank(16%). 3enterprises
accessed Oriental bank of Commerce and State Bank of India each (6%) while the rest
15enterprises availed from various other banks. The small enterprises have also had higher
bank linkages with SIDBI, Punjab National Bank and Canara Bank over the rest of the banks.
Out of 92enterprises, 3enterprises had availed loans from private banks viz. Axis bank (2) and
HDFC (1).
It has been seen that if the bank has a specific credit line for the SME sector or specialized
SME Division, they are able to provide more loans to the SME enterprises. Out of the total
term loan sanctioned to the 92 enterprises i.e. Rs. 2894.1 Lakhs, banks with specialised SME
centres have sanctioned Rs. 2788.1 Lakhs i.e. 96.3% of the total loan sanctioned to 51
enterprises. According to a local Chartered Accountant based in Punjab, “the pro-activeness of
the banks in SME Financing is highly influenced by the knowledge and exposure of the branch
heads towards SME sector who can accordingly reorient the portfolio of the banks’ lending
towards MSMEs.” Also, it is essential to orient the branch’s staff towards SME financing and
create awareness regarding the MSME schemes and subsidies. Banks are therefore also able to
provide loans for energy efficiency, cleaner production technologies and automation related to
improved occupational health & safety. It was felt that capacity building of the bankers also
played a positive role in providing loans for sustainable production.
Learning no. 8: In order to promote bigger offtake of sustainable production loans, banks
need to have Specialized SME branches or centres with trained human resource. (Supply)
This section has tried to capture learnings that have been derived on the basis of FMC’s
experiences over the course of the project. These learnings have focussed on the demand side,
supply side and facilitation issues that have a major role to play in non-availability of
3 3
10
8
11
15
2 2
10
7
8
13
0
2
4
6
8
10
12
14
16
OBC SBI PNB Canara SIDBI Others
Micro units Small units
Figure 11: Linkages with banks as per size of enterprises
33. Page | 33
institutional finance to the enterprises. Hence, the next section is based on the learning of the
project and also learning from various best practices to address certain issues which would be
beneficial to the policy makers and bankers for laying down a road map for effective outreach
of institutional finance to MSMEs.
CHAPTER V
Way Forward
Regardless of the huge concentration of MSMEs in India, the country still lacks an overall
drive towards provision of institutional credit necessary for improving the competitiveness of
this sector in general and fostering sustainable production practices in particular. Such issues
of sustainable production are expected to exist in more than 176 clusters across the country
across 11 less sustainable sectors where MSMEs are significantly present. To address this, it is
important to understand the financial and non-financial needs of the sector.
Based on the project learnings, it is quite imperative to comprehend the necessity to work with
both on the supply side by understanding the need as well as developing capacities of the banks
and also on the demand side by assessing the need and capacity gaps of the MSMEs.
Simultaneously, structural changes and introduction of intermediaries where a strong
facilitation is critical and support from banks is necessary. This problem of sustainable
financing however cannot be resolved without addressing the issue of general financing to the
MSMEs. The following suggested way forward focuses on sustainable financing in particular,
however, it also has relevance for general MSME financing. This way forward is based on the
learning from the project and also learning from various other best practices outside the project.
It also supplements the overarching policy drive on Make in India, Zero Defect-Zero Effect
and Clean India initiatives.
1) Systematic Approach to Assess Credit Requirement for Sustainable Production:
The project with direct experience with 500 foundry enterprises made us learn that, it
is not always correct to assume that the MSMEs can produce sustainably with adoption
of high end machines and equipment which require huge investment and thus financial
linkages are paramount. Sustainable production can be achieve and energy savings can
be made with smart alignments, retrofitting, and upgradation of skill level of labour and
with other small initiatives. Many projects funded by Multilateral donor agencies and
also the public support schemes laid by the government and Banks focus on tangible
and substantial machinery changes which can lead to capital infusion. Many of them
keep silent on the small need based activities like capacity building of units for
retrofitting, creating and linking ‘Business Development Service Providers’, skill
development and other practices that can lead to energy saving and make the MSMEs
sustainable and thus the estimates on credit needs do not cover all these requirements,
rather it focuses only on the big ticket size loans for major technology changes.
34. Page | 34
Very often Banks measure existing credit requirement of the enterprises and the supply
of credit by the Banks and estimate the gaps. But they do not consider the future growth
potential of the sector and likely demand for credit that can pump into the sector. Thus
they miss out the potential credit offtake that can become a means to trigger growth of
the sector or can be a consequential demand generated through natural growth process
of the sector.
It is recommended that financing need assessment should be done by employing a
systematic methodology to understand the complete value chain and technology of the
enterprise and assess all the stages of production to identify the nodes for intervention
that can maximise the benefit with minimum investment. Such intervention can not
only lead to energy savings but also will generate greater and quicker interest among
the MSMEs to adopt them as it requires low investments. However, all the options of
return and investment at different nodes can be captured and compared to make short
term, mid-term and long term plan of investment for sustainable growth.
2) Capacity Building of Banking Staff and Financial Intermediaries: As discussed in
the above point, a systematic method of credit need assessment of the MSMEs is
required given their divergent and complex nature of activities. Therefore the bankers
need to be capacitated with such need assessment process. Moreover, the learning based
on the experience states that in order to promote bigger offtake of sustainable
production related loans, banks need to have specialized MSME branches or centres
with trained human resources. The pro-activeness of the banks in MSME Financing is
highly influenced by the knowledge and exposure of the branch heads towards MSME
sector who can accordingly customize their bank’s services and provide tailor-made
solutions based on the needs of the enterprises in the region. Moreover, it is essential
to orient the attitude of branch office staff towards MSME financing and create
awareness regarding the MSME schemes and subsidies. This would enable them to
provide alternative financing options. Thus, capacity building of the bankers plays a
vital role in creating linkages of the banks with the enterprises. Mini-workshops can be
organized for focused dissemination of loan products & processes for MSMEs (e.g.
Formats in which documents need to be submitted, key requisites of collaterals like
land etc.).
3) Identifying Proxy Indicators for Identifying and Assessing Credit Worthiness of the
Loanees: Lack of documented information or information asymmetry burdens the
banks significantly as there is a high cost of obtaining credit Information on SMEs
which sometimes leads to adverse selection (which means, if lenders perceive the risks
of lending to MSMEs to be greater than they actually are, they will charge higher
interest rates or refrain from lending to them altogether). Lack of access to third party
information like credit profiles and histories by lenders reinforce their perception of the
high risk involved in lending to MSMEs.
35. Page | 35
Given the educational and financial literacy related problems of MSME entrepreneurs
coupled with their informality of business and information asymmetry, Banks can come
up with more simplified criteria like undertaking loan analysis through Cash flows,
Reputation assessment (e.g. linkage with reputed buyers/suppliers) which can provide
positive assurance to the banks on their credit worthiness.
4) Set-up Credit Facilitation bureaus for Outreach in Clusters: Setting up of the Credit
Facilitation Bureaus will help overcome the excessive cost to lenders for purposes like
directly screening and monitoring their clients as they use credit facilitation bureaus for
third party information. They lower the cost of lending to SMEs by offering reports/data
on the firms’ loan repayment histories. This allows lenders to efficiently utilise
information on the track record of borrowers in meeting their past debts, which is a
better performance predictor to analyse future loan performance than the client
behaviour in accordance to their payment of water, electricity, and other miscellaneous
utility bills. For prompt repayment of loans, they also offer incentive, as delayed
payment to one lender can result in incapability to avail future loans from other lenders.
Pilots should be conducted first and based on the learnings, scaling up should be
undertaken thereafter by way of first building a business model. Initially these bureaus
can be supported through viability gap funding and become a membership-based
organization.
5) Introduce and Strengthen other MSME Financing Channels and Instruments:
MSME enterprises can also rely on Non-Banking Financial Companies (NBFC) when
banks are not willing to finance those who are unable to meet the eligibility criteria.
However, these NBFCs need to be supported by large banks or developmental banks.
It is also essential to conduct special training programmes and build capacities of
NBFCs in MSME financing as suggested for Banks in one of the above
recommendations.
Also, innovative lending methodologies are of vital importance to bridge the gap
between demand and supply in MSMEs. Structural changes are necessary to be tried if
the outreach has to be increased. This necessarily will need aggregation at various
levels. Clusters happen to be one form of aggregation. Private enterprises that bring
together several enterprises with pre-information such as rating agencies and many
more.
6) Awareness of Government Support schemes among the bankers and their linkages
with the loanee MSMEs will help increase credit offtake and reduce credit risk: It has
been observed that enterprises prefer CLCSS schemes for technological upgradation
owing to two factors. This is because the procedural requisites to apply for the CLCSS
schemes are simple and easy to comprehend thus convenient for the entrepreneurs.
Second, subsidy through Govt. Schemes reduces the cost of financing and also the risk
associated with the technology and thus creates the demand for the new technology.
36. Page | 36
Bankers also need to be sensitised on other public support schemes which can generate
credit offtake through technical handholding, solving other non-financial needs and so
on.
7) Create Pools of Empanelled Local Service Providers in Clusters: The presence of a
Chartered Accountant (CA) reduces the waiting time by leaps and bounds as they are
able to communicate the needs of the enterprises to the banks. Also, the banks have a
trust factor in providing loans to the enterprises due to a CA being involved in the
process. This has played a vital role in lowering the reliance on informal sources of
financing among the enterprises like chit funds and hire leasing and purchasing in the
said project. Hence, the enterprises have started perceiving the benefits of formal
sources of financing (banks) which provide them with bigger category of loan size and
charge them lesser rate of interests. Also, Attitude of CAs in favour of MSMEs were
triggered through their capacity building.
It is vital to lay equal importance on capacity building of such financial intermediaries
since they play a big role in credit facilitation of the MSMEs. Relationships can be
established with the CAs by creation of panels for financial intermediaries which
maintain transparency for efficient credit linkage between the MSMEs and the banks.
8) Collaborate with Business Membership Organisation (BMO) for Outreach: There is
a good scope for linking with scheme support while availing loan but not many
enterprises are doing it, because of technical support and follow ups needed. BMOs in
the cluster can play a significant role here. Also, as seen from our learnings, first-time
loanees require intensive credit facilitation support that can be provided by the BMOs.
Efforts have to be taken regarding improvement in the awareness of all central and state
government schemes in collaboration with various banks thus educating the enterprise
owners about various grants, funds and credit facilities available for them. There are
cases where some of the small businesses are not fully aware and oblivious to the funds
and grants which are available for them to finance the business requisites and hence,
small businesses are incompetent in expanding their business due to lack of capital and
access to credit. Most of the micro enterprise owners have low levels of education and
little or no exposure. Hence, another learning that elucidates facilitation of support
through provision of financial literacy inputs, information on the foundry sector
equipment required, support in documentation and providing handholding support for
linking up with banks can be done by the BMOs. Also, the government has to work
hand in hand with the owner of the enterprises and educate them and guide them on
how to manage their business.
The Suggestive Model: Encompassing all the learnings and suggestions, a comprehensive
method on “Cluster Focused Knowledge Driven Banking (CFKDB)” is proposed
for the Financial Institutions to improve the competitiveness of MSMEs and make the sector
sustainable.
37. Page | 37
The learnings suggest that not all clusters have the same or similar readiness for adopting
sustainable production methods. Accordingly selection of clusters is critical for sustainability
linked financing. Bankers need to aware about the factors that are critical for the offtake of
technology and therefore institutional financing. These factors put together can be called as
‘knowledge driven banking.’ Financial need assessment for sustainable production requires a
comprehensive understanding and factoring of the techno-commercial aspects of the targeted
businesses which is drawn from an experiential learning of the paper. The problem of high
operating cost and perceived higher lending risk can be minimized through leveraging on the
social capital measured through the extent and depth of linkages with other relevant
stakeholders in the clusters. This social capital can be leveraged by the bankers through active
associations of enterprises (BMOs), strong value chain linkages, inter and intra stakeholder
relationships, presence of capable consultants & quality of linkages among banks, enterprises
and such BDSPs/financial consultants.
For this, bank can create an approved panel of financial consultants and use other
stakeholder linkages in the clusters as soft collaterals for finance. This will help reduce cost
of transaction, reduce risk and increase offtake of institutional credit to the MSMEs through
more collateral free loans. The banks can individually and collectively develop systems of
approved list of consultants who can educate the MSMEs and handhold them in application
filing and documentation. Banks should also build the capacity of local associations to educate
the entrepreneurs and help maintain financial discipline through external monitoring through
innovative mechanisms. Approval of the association can also be used for assessing the
credibility of enterprises. The charge for such services can be linked to credit off-take and thus
would also become a sustainable revenue source for the associations. The bankers will
however need to be trained on cluster based financing to go beyond their current methods
of individual enterprise based evaluation to focus on value chain and cluster based financing.
This is in concurrence with the learning that in order to promote bigger offtake of sustainable
production loans, banks need to have specialized SME branches or centres with trained human
resource.
Since most of the enterprises in clusters produce same and similar products, their production
system/ technology, inputs viz. raw materials, human resources, machineries, etc. and the
sources of the same are same. Therefore there is an advantage of economies of scale in
information provision as well as economies of scale of financial market. Knowing the
production process and business requirement, bank can plan appropriate credit instruments and
delivery mechanisms through reduced operational costs. Moreover, the social capital and
presence of trusted BDSPs, other support institutions like District Industry Centre (DIC),
MSME- Development Institute, and Technical Institutes can also be used to ensure increased
awareness and higher outreach by better understanding the cluster dynamics and its credit
requirements by leveraging upon relevant stakeholder linkages.
Different innovative ways of cluster financing can be tried through the Cluster Focused
Knowledge Driven Banking (CFKDB), model. However, for doing so, the Bank has to assess
the MSME cluster sector and identify the potential ones where the venture could be profitable
and can appropriately address sustainability of MSMEs. For this a knowledge based
38. Page | 38
organisation (KBO) having sufficient knowledge and experience in the MSME clusters can be
hired to do the assessment and suggest an appropriate strategy to the Bank through “Cluster
Focused Knowledge Driven Banking (CFKDB)”.
Given that around 63 % or approximately two-third of MSMEs are situated in various clusters
and it is estimated that, India has over 1157 SME (industrial) and more than 6000 artisan/micro
enterprises clusters, this CFKDB model can be an effective model to address the financial need
of MSME sector in the country.