The document describes a process for assembling mobile screens at high speed using an efficient motor. Screens are checked for dimensions upon arrival and either accepted or rejected. Accepted screens are fitted into vacant slots in mobile bodies using a holder and piston. Screens are then clamped and inspected visually and automatically at subsequent stations to ensure quality before packaging by a robot to minimize damage. The goal is to assemble mobile screens efficiently while maintaining the highest quality standards.

1. Concept:
 The main purpose of this project is to assemble screens on a mobile screens at a high
pace using highly efficient motor
 The work area where mobiles are assembled consists of two layers. Bottom layer
contains mobile body & top layer contains mobile screen.
 First of all, when it arrives at the station, the screen will be checked for dimensions. It is
held with the help of holder & then the holder is pushed inside. If the dimensions are
accurate, screen is accepted; otherwise rejected.
 Then the piston of holder is pulled back & the screen drops into the vacant slot of
mobile body & gets fitted there.
 It is then picked up & placed on next station where it is being clamped.
 In the subsequent station, it is checked for quality. There are two types of inspections,
one is done visually by a human being & the other inspection is done at the station. The
reason for such high inspection is that before shipping our product to the customer, we
want to make sure that the product meets the specification at its best.
 Last but not the least, a gantry robot picks up (sucking up) the finished mobile and drops
it in the empty bin right beside. The main motive for using robot at this stage is that we
want minimum damage to the finished product as our firm believes in utmost quality.